windows-nt/Source/XPSP1/NT/base/hals/halsp/i386/spsproca.asm

374 lines
11 KiB
NASM
Raw Permalink Normal View History

2020-09-26 03:20:57 -05:00
title "MP primitives for Compaq SystemPro"
;++
;
;Copyright (c) 1991 Microsoft Corporation
;
;Module Name:
;
; spsproca.asm
;
;Abstract:
;
; SystemPro Start Next Processor assemble code
;
; This module along with mpspro.c implement the code to start
; off the second processor on the Compaq SystemPro.
;
;Author:
;
; Ken Reneris (kenr) 12-Jan-1992
;
;Revision History:
;
;--
.386p
.xlist
include hal386.inc
include callconv.inc ; calling convention macros
include i386\kimacro.inc
include mac386.inc
include i386\spmp.inc
.list
EXTRNP _HalpBuildTiledCR3,1
EXTRNP _HalpFreeTiledCR3,0
extrn _MppIDT:DWORD
extrn _MpLowStub:DWORD
extrn _MpLowStubPhysicalAddress:DWORD
extrn _MpCount:DWORD
extrn _SpProcessorControlPort:WORD
extrn _SpType:BYTE
;
; Internal defines and structures
;
PxParamBlock struc
SPx_flag dd ?
SPx_TiledCR3 dd ?
SPx_P0EBP dd ?
SPx_ControlPort dd ?
SPx_PB db processorstatelength dup (?)
PxParamBlock ends
_TEXT SEGMENT PARA PUBLIC 'CODE' ; Start 32 bit code
ASSUME DS:FLAT, ES:FLAT, SS:NOTHING, FS:NOTHING, GS:NOTHING
;++
;
; BOOLEAN
; HalStartNextProcessor (
; IN PLOADER_BLOCK pLoaderBlock,
; IN PKPROCESSOR_STATE pProcessorState
; )
;
; Routine Description:
;
; This routine is called by the kernel durning kernel initialization
; to obtain more processors. It is called until no more processors
; are available.
;
; If another processor exists this function is to initialize it to
; the passed in processorstate structure, and return TRUE.
;
; If another processor does not exists, then a FALSE is returned.
;
; Also note that the loader block has been setup for the next processor.
; The new processor logical thread number can be obtained from it, if
; required.
;
; Arguments:
; pLoaderBlock, - Loader block which has been intialized for the
; next processor.
;
; pProcessorState - The processor state which is to be loaded into
; the next processor.
;
;
; Return Value:
;
; TRUE - ProcessorNumber was dispatched.
; FALSE - A processor was not dispatched. no other processors exists.
;
;--
pLoaderBlock equ dword ptr [ebp+8] ; zero based
pProcessorState equ dword ptr [ebp+12]
;
; Local variables
;
PxFrame equ [ebp - size PxParamBlock]
cPublicProc _HalStartNextProcessor ,2
push ebp ; save ebp
mov ebp, esp ;
sub esp, size PxParamBlock ; Make room for local vars
push esi
push edi
push ebx
xor eax, eax
mov PxFrame.SPx_flag, eax
cmp _MpCount, eax
jbe snp_exit ; exit FALSE
mov esi, OFFSET FLAT:StartPx_RMStub
mov ecx, StartPx_RMStub_Len
mov edi, _MpLowStub ; Copy RMStub to low memory
add edi, size PxParamBlock
rep movsb
lea edi, PxFrame.SPx_PB
mov esi, pProcessorState
mov ecx, processorstatelength ; Copy processorstate
rep movsb ; to PxFrame
stdCall _HalpBuildTiledCR3, <pProcessorState>
mov PxFrame.SPx_TiledCR3, eax
mov PxFrame.SPx_P0EBP, ebp
mov eax, pLoaderBlock ; lookup processor # we are
mov eax, [eax].LpbPrcb ; starting
movzx eax, byte ptr [eax].PbNumber
movzx edx, _SpProcessorControlPort[eax*2] ; Get processor's control port
mov PxFrame.SPx_ControlPort, edx ; Pass it along
mov ecx, size PxParamBlock ; copy param block
lea esi, PxFrame ; to low memory stub
mov edi, _MpLowStub
mov eax, edi
rep movsb
add eax, size PxParamBlock
mov ebx, OFFSET FLAT:StartPx_RMStub
sub eax, ebx ; (eax) = adjusted pointer
mov bx, word ptr [PxFrame.SPx_PB.PsContextFrame.CsSegCs]
mov [eax.SPrxFlatCS], bx ; patch realmode stub with
mov [eax.SPrxPMStub], offset _StartPx_PMStub ; valid long jump
mov ebx, _MppIDT
add ebx, WarmResetVector
cli
push dword ptr [ebx] ; Save current vector
mov eax, _MpLowStubPhysicalAddress
shl eax, 12 ; seg:0
add eax, size PxParamBlock
mov dword ptr [ebx], eax ; start Px here
cmp _SpType, SMP_SYSPRO2 ; Belize?
jne short snp10 ; no, reset normal
mov dx, SMP_INDEX_PORT
mov eax, pLoaderBlock ; lookup processor # we are
mov eax, [eax].LpbPrcb ; starting
movzx eax, byte ptr [eax].PbNumber
or eax, (SMP_RESET_CPU shl 24) + (SMP_CSR_PORT shl 8)
out dx, eax ; issue Belize reset to processor
jmp short snp20 ; go wait
snp10:
mov edx, PxFrame.SPx_ControlPort ; Control port of target
in al, dx ; processor
or al, RESET ; assert RESET
and al, NOT SLEEP ; wakeup P1
out dx, al ; reset P1
snp20: cmp PxFrame.SPx_flag, 0 ; wait for Px to get it's
jz snp20 ; info
pop dword ptr [ebx] ; restore WarmResetVector
sti
stdCall _HalpFreeTiledCR3 ; free memory used for tiled
; CR3
dec _MpCount ; one less
mov eax, 1 ; return TRUE
snp_exit:
pop ebx
pop edi
pop esi
mov esp, ebp
pop ebp
stdRET _HalStartNextProcessor
stdENDP _HalStartNextProcessor
_TEXT ends ; end 32 bit code
_TEXT16 SEGMENT DWORD PUBLIC USE16 'CODE' ; start 16 bit code
;++
;
; VOID
; StartPx_RMStub
;
; Routine Description:
;
; When a new processor is started, it starts in real-mode and is
; sent to a copy of this function which has been copied into low memory.
; (below 1m and accessable from real-mode).
;
; Once CR0 has been set, this function jmp's to a StartPx_PMStub
;
; Arguments:
; none
;
; Return Value:
; does not return, jumps to StartPx_PMStub
;
;--
cPublicProc StartPx_RMStub ,0
cli
db 066h ; load the GDT
lgdt fword ptr cs:[SPx_PB.PsSpecialRegisters.SrGdtr]
db 066h ; load the IDT
lidt fword ptr cs:[SPx_PB.PsSpecialRegisters.SrIdtr]
mov eax, cs:[SPx_TiledCR3]
mov cr3, eax
mov ebp, dword ptr cs:[SPx_P0EBP]
mov ecx, dword ptr cs:[SPx_PB.PsContextFrame.CsSegDs]
mov ebx, dword ptr cs:[SPx_PB.PsSpecialRegisters.SrCr3]
mov eax, dword ptr cs:[SPx_PB.PsSpecialRegisters.SrCr0]
mov cr0, eax ; into prot mode
db 066h
db 0eah ; reload cs:eip
SPrxPMStub dd 0
SPrxFlatCS dw 0
StartPx_RMStub_Len equ $ - StartPx_RMStub
stdENDP StartPx_RMStub
_TEXT16 ends ; End 16 bit code
_TEXT SEGMENT ; Start 32 bit code
;++
;
; VOID
; StartPx_PMStub
;
; Routine Description:
;
; This function completes the processor's state loading, and signals
; the requesting processor that the state has been loaded.
;
; Arguments:
; ebx - requested CR3 for this processors_state
; cx - requested ds for this processors_state
; ebp - EBP of P0
;
; Return Value:
; does not return - completes the loading of the processors_state
;
;--
align 16 ; to make sure we don't cross a page boundry
; before reloading CR3
cPublicProc _StartPx_PMStub ,0
; process is now in the load image copy of this function.
; (ie, it's not the low memory copy)
mov cr3, ebx ; get real CR3
mov ds, cx ; set real ds
lea esi, PxFrame.SPx_PB.PsSpecialRegisters
lldt word ptr ds:[esi].SrLdtr ; load ldtr
ltr word ptr ds:[esi].SrTr ; load tss
lea edi, PxFrame.SPx_PB.PsContextFrame
mov es, word ptr ds:[edi].CsSegEs ; Set other selectors
mov fs, word ptr ds:[edi].CsSegFs
mov gs, word ptr ds:[edi].CsSegGs
mov ss, word ptr ds:[edi].CsSegSs
add esi, SrKernelDr0
.errnz (SrKernelDr1 - SrKernelDr0 - 1 * 4)
.errnz (SrKernelDr2 - SrKernelDr0 - 2 * 4)
.errnz (SrKernelDr3 - SrKernelDr0 - 3 * 4)
.errnz (SrKernelDr6 - SrKernelDr0 - 4 * 4)
.errnz (SrKernelDr7 - SrKernelDr0 - 5 * 4)
lodsd
mov dr0, eax ; load dr0-dr7
lodsd
mov dr1, eax
lodsd
mov dr2, eax
lodsd
mov dr3, eax
lodsd
mov dr6, eax
lodsd
mov dr7, eax
mov esp, dword ptr ds:[edi].CsEsp
mov esi, dword ptr ds:[edi].CsEsi
mov ecx, dword ptr ds:[edi].CsEcx
push dword ptr ds:[edi].CsEflags
popfd ; load eflags
push dword ptr ds:[edi].CsEip ; make a copy of remaining
push dword ptr ds:[edi].CsEax ; registers which need
push dword ptr ds:[edi].CsEbx ; loaded
push dword ptr ds:[edi].CsEdx
push dword ptr ds:[edi].CsEdi
push dword ptr ds:[edi].CsEbp
cmp _SpType, SMP_SYSPRO2 ; Don't send old SP
je short spxpm01 ; style Cache on enable
; eax, ebx, edx are still free
mov edx, [PxFrame.SPx_ControlPort] ; our control port
in al, dx ; Get register
and al, NOT INTDIS ; allow PINTs on this proc
or al, CACHEON ; turn cache on
out dx, al
spxpm01:
inc [PxFrame.SPx_flag] ; Signal p0 that we are
; done with it's data
; Set remaining registers
pop ebp
pop edi
pop edx
pop ebx
pop eax
stdRET _StartPx_PMStub ; Set eip
stdENDP _StartPx_PMStub
_TEXT ends ; end 32 bit code
end