able/windows-nt
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
windows-nt/Source/XPSP1/NT/net/snmp/mibs/msiprip2.mib

1372 lines
32 KiB
Plaintext
Raw Permalink Normal View History

Add source files
2020-09-26 03:20:57 -05:00
MSIPRIP2-MIB DEFINITIONS ::= BEGIN
--
-- Microsoft(R) RIP Version 2 for Internet Protocol MIB
--
-- This MIB defines the management information for the Routing Information
-- Protocol Version 2 ( RIP v2). The information in this MIB is divided
-- into 3 groups:
--
-- 1. Global Group
-- Contains the global information and statistics for the RIP protocol
-- Information contained in this group is independent of the interfaces
-- over which the protocol is enabled.
--
-- 2. Interface Group
-- Contains RIP configuration information and statistics specific
-- to each interface.
--
-- 3. Peer Group
-- Contains statistics pertaining to RIP peers.
--
IMPORTS
enterprises, OBJECT-TYPE,
TimeTicks, Counter, IpAddress
FROM RFC1155-SMI
microsoft, software
FROM MSFT-MIB;
-- MSIPRIP2
-- microsoft OBJECT IDENTIFIER ::= { enterprises 311 }
-- software OBJECT IDENTIFIER ::= { microsoft 1 }
msiprip2 OBJECT IDENTIFIER ::= { software 11 }
--
-- groups in MSIPRIP2
--
global OBJECT IDENTIFIER ::= { msiprip2 1 }
interface OBJECT IDENTIFIER ::= { msiprip2 2 }
peer OBJECT IDENTIFIER ::= { msiprip2 3 }
--
-- RIP Global Group
--
-- Contains the global information and statistics for the RIP protocol
-- Information contained in this group is independent of the interfaces
-- over which the protocol is enabled.
--
-- Global information consists of scalar variables which can be
-- updated and a peer filter table
--
-- Global information also contains global RIP statitics
--
globalSystemRouteChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of changes RIP has made to the system routing tables."
::= { global 1 }
globalTotalResponseSends OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of request messages for which responses have been sent."
::= { global 2 }
globalLoggingLevel OBJECT-TYPE
SYNTAX INTEGER {
none(1),
error(2),
warning(3),
information(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Information logged can be None, Error only, Error + Warning,
Error + Warn + Logging. This variable controls the amount
of information logged"
::= { global 3 }
globalMaxRecQueueSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum size to use for queueing incoming packets."
::= { global 4 }
globalMaxSendQueueSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum size to use for queueing outgoing packets."
::= { global 5 }
globalMinTriggeredUpdateInterval OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum lag time before sending a triggered update. Used to
consolidate updates to the route table and reduce number of
updates sent."
::= { global 6 }
globalPeerFilterMode OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
include(2),
exclude(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls the use of update messages from the list of peers in the peer
filter table.
If set to include
routes will be only be accepted if they are from the routers in the
peer array.
If set to exclude
routes will be rejected that come from the routers whose addresses are
in the peer array, and all other routers will be accepted."
::= { global 7 }
globalPeerFilterCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of entries in the peer filter table"
::= { global 8}
--
-- the Peer filter Table
--
--
-- Entries in the peer filter table are IP addresses of routers that
-- interact with this router via RIP. The use of the entries in this table
-- is controlled by the global variable "globalPeerFilterMode"
--
globalPeerFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalPeerFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of peer routers communicating with this router via RIP"
::= { global 9 }
globalPeerFilterEntry OBJECT-TYPE
SYNTAX GlobalPeerFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Peer router entry. Contains the IP address of peer router"
INDEX { globalPFAddr }
::= { globalPeerFilterTable 1 }
GlobalPeerFilterEntry ::=
SEQUENCE {
globalPFAddr
IpAddress,
globalPFTag
INTEGER
}
globalPFAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP Address of peer router"
::= { globalPeerFilterEntry 1 }
globalPFTag OBJECT-TYPE
SYNTAX INTEGER {
create(1),
delete(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"create : Creates an entry in the Global Peer Filter table
delete : Deletes an entry in the Global Peer Filter table
"
::= { globalPeerFilterEntry 2 }
--
-- RIP Interface group
--
-- Contains RIP interface configuration information, RIP interface
-- statistics and RIP interface binding information. Each type of
-- information is stored in a table with one entry for each
-- interface over which RIP is enabled.
--
-- Asscociated with each entry in the Interface Config table is a
-- list of entries in the
-- Unicast peer table : List of peers to which the update
-- message is unicast.
-- Accept Route Filter Table : List of routes used to filter the
-- accepted routes.
-- Announce Route Filter Table : List of routes used to filter the
-- annouced routes
--
-- Asscociated with each entry in the Interface binding table is a
-- list of entries in the
--
-- Interface Address Table : List of address bound to an interface
--
--
-- Interface Statistics Table.
--
--
-- RIP statistics for each interface. Statistics include
-- number of requests/responses sent/received,
-- number of send/receive failures
-- number of triggered updates sent
-- number of bad packet/entries revceived.
--
ifStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of RIP statistics for interfaces"
::= { interface 1 }
ifStatsEntry OBJECT-TYPE
SYNTAX IfStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"RIP interface statistics entry.
Each entry contains counts of send/receive failures, requests/resposes
sent/received, bad packets/entries reveived and triggered updates sent"
INDEX { ifSEIndex }
::= { ifStatsTable 1 }
IfStatsEntry ::=
SEQUENCE {
ifSEIndex
INTEGER,
ifSEState
INTEGER,
ifSESendFailures
Counter,
ifSEReceiveFailures
Counter,
ifSERequestSends
Counter,
ifSERequestReceiveds
Counter,
ifSEResponseSends
Counter,
ifSEResponseReceiveds
Counter,
ifSEBadResponsePacketReceiveds
Counter,
ifSEBadResponseEntriesReceiveds
Counter,
ifSETriggeredUpdateSends
Counter
}
ifSEIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for the RIP interface Statistics table"
::= { ifStatsEntry 1 }
ifSEState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
bound(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current state of RIP on this interface."
::= { ifStatsEntry 2 }
ifSESendFailures OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times a failure occurred while attempting to send a
packet on this interface."
::= { ifStatsEntry 3 }
ifSEReceiveFailures OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times a failure occurred while attempting to receive
a packet on this interface."
::= { ifStatsEntry 4 }
ifSERequestSends OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of RIP REQUEST packets sent on this interface."
::= { ifStatsEntry 5 }
ifSERequestReceiveds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of RIP REQUEST packets received on this interface."
::= { ifStatsEntry 6 }
ifSEResponseSends OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of RIP RESPONSE packets sent on this interface."
::= { ifStatsEntry 7 }
ifSEResponseReceiveds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of RIP RESPONSE packets received on this interface."
::= { ifStatsEntry 8 }
ifSEBadResponsePacketReceiveds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of RIP RESPONSE packets discarded due to errors in the header."
::= { ifStatsEntry 9 }
ifSEBadResponseEntriesReceiveds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of RIP RESPONSE routes ignored due to errors in the entry."
::= { ifStatsEntry 10 }
ifSETriggeredUpdateSends OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Count of triggered updates sent. "
::= { ifStatsEntry 11 }
--
-- RIP Interface Configuration Table.
--
--
-- RIP Interface config includes the interface setting for :
--
-- update, annouce and accept modes,
-- full update, route expiration and route removal intervals,
-- Unicast peer, accept/annouce filter counts and
-- authentication information.
--
-- Associated with each interface entry in this table, there are a
-- set of entries in
--
-- RIP Unicast Peer Table
-- RIP Announce Fitler Table
-- RIP Accept Filter Table.
--
-- The use of the entries in each of the above tables is controlled
-- by the value of the respective modes in the interface config setting
--
ifConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"RIP Interface configuration table. List of subnets that require
separate configuration in RIP."
::= { interface 2 }
ifConfigEntry OBJECT-TYPE
SYNTAX IfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"RIP configuration entry for an interface. A single routing domain in a
single subnet."
INDEX { ifCEIndex }
::= { ifConfigTable 1 }
IfConfigEntry ::=
SEQUENCE {
ifCEIndex
INTEGER,
ifCEState
INTEGER,
ifCEMetric
INTEGER,
ifCEUpdateMode
INTEGER,
ifCEAcceptMode
INTEGER,
ifCEAnnounceMode
INTEGER,
ifCEProtocolFlags
INTEGER,
ifCERouteExpirationInterval
TimeTicks,
ifCERouteRemovalInterval
TimeTicks,
ifCEFullUpdateInterval
TimeTicks,
ifCEAuthenticationType
INTEGER,
ifCEAuthenticationKey
OCTET STRING,
ifCERouteTag
INTEGER,
ifCEUnicastPeerMode
INTEGER,
ifCEAcceptFilterMode
INTEGER,
ifCEAnnounceFilterMode
INTEGER,
ifCEUnicastPeerCount
INTEGER,
ifCEAcceptFilterCount
INTEGER,
ifCEAnnounceFilterCount
INTEGER
}
ifCEIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for RIP interface config. table."
::= { ifConfigEntry 1 }
ifCEState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
bound(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current state of RIP on this interface."
::= { ifConfigEntry 2 }
ifCEMetric OBJECT-TYPE
SYNTAX INTEGER (0..16)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Metric for the network connected to this interface."
DEFVAL { 1 }
::= { ifConfigEntry 3 }
ifCEUpdateMode OBJECT-TYPE
SYNTAX INTEGER {
periodic(1),
demand(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Mode for sending update messages. If set to periodic, then messages
are sent based on the value of ifCEFullUpdateInterval. Otherwise
update messages are sent only on demand."
DEFVAL { periodic }
::= { ifConfigEntry 4 }
ifCEAcceptMode OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
rip1(2),
rip1Compat(3),
rip2(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the type of RIP messages that will be accepted by this router
disable : No RIP messages wil be accepted
rip1 : Only RIP-1 messages will be accepted
rip1Compat : Both RIP-1 and RIP-2 messages will be accepted
rip2 : Only RIP-2 messages will be accepted"
DEFVAL { rip1Compat }
::= { ifConfigEntry 5 }
ifCEAnnounceMode OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
rip1(2),
rip1Compat(3),
rip2(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the type of RIP messages that will be sent by this router.
disable : No RIP messages wil be sent
rip1 : Only RIP-1 messages will be sent in compliance with
RFC 1058.
rip1Compat : RIP-2 messages will be broadcast using RFC 1058
subsumption rules.
rip2 : RIP-2 messages will be multicast"
DEFVAL { rip1Compat }
::= { ifConfigEntry 6 }
ifCEProtocolFlags OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Options for control of RIP operation. These options can be used in
combination.
Option value
--------------------------------------------------
1. ACCEPT_HOST_ROUTES 0x00000001
2. ANNOUNCE_HOST_ROUTES 0x00000002
3. ACCEPT_DEFAULT_ROUTES 0x00000004
4. ANNOUNCE_DEFAULT_ROUTES 0x00000008
5. SPLIT_HORIZON 0x00000010
6. POISON_REVERSE 0x00000020
7. GRACEFUL_SHUTDOWN 0x00000040
8. TRIGGERED_UPDATES 0x00000080
9. OVERWRITE_STATIC_ROUTES 0x00000100 "
DEFVAL { 240 }
::= { ifConfigEntry 7 }
ifCERouteExpirationInterval OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interval after which route is marked for deletion."
DEFVAL { 180 }
::= { ifConfigEntry 8 }
ifCERouteRemovalInterval OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interval after which a route marked for deletion is removed."
DEFVAL { 120 }
::= { ifConfigEntry 9 }
ifCEFullUpdateInterval OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interval between route table annoucements."
DEFVAL { 30 }
::= { ifConfigEntry 10 }
ifCEAuthenticationType OBJECT-TYPE
SYNTAX INTEGER {
noAuthentication(1),
simplePassword(2),
md5(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of authentication to be used on this interface."
DEFVAL{ noAuthentication }
::= { ifConfigEntry 11 }
ifCEAuthenticationKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value to be used as the Authentication key whenever the
corresponding instance of ifCEAuthenticationType has a value
other than noAuthentication. A modification of the
corresponding instance of ifCEAuthentiationType does not modify
the ifCEAuthenticationKey value. If a string shorter than 16
octects is supplied, it will be left-justified and padded to 16
octects, on the right with nulls (0x00).
Reading this object always results in an OCTET STRING of length
zero; authentication may not be bypasssed by reading the MIB
object"
DEFVAL { ''h }
::= { ifConfigEntry 12 }
ifCERouteTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Value inserted into the Routing Domain field of all RIP packets
sent on this interface."
DEFVAL { 0 }
::= { ifConfigEntry 13 }
ifCEUnicastPeerMode OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
peerAlso(2),
peerOnly(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Determines the unicast behavior when route update messages are sent.
If set to peerAlso, updates are sent to those peers in the
RIP unicast peer table corresponding to this interace as well as
being sent via broadcast/multicast.
If set to peerOnly, updates are sent only those peers listed in
in the RIP Unicast peer table corresponding to this interface."
DEFVAL{ disable }
::= { ifConfigEntry 14 }
ifCEAcceptFilterMode OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
include(2),
exclude(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Determines the accept behaviour of the RIP router.
If set to include
the entries in the Accept Filter Table corresponding to this interface
specify the routes to be included. All other routes are excluded.
If set to exclude
the entries in the Accept Filter Table corresponding to this interface
specify the routes to be excluded."
DEFVAL { disable }
::= { ifConfigEntry 15 }
ifCEAnnounceFilterMode OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
include(2),
exclude(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Determines the annouce behaviour of the RIP router.
If set to include
the entries in the Announce Filter Table corresponding to this
interface specify the routes to be included. All other routes
are excluded.
If set to exclude
the entries in the Announce Filter Table corresponding to this
interface specify the routes to be excluded."
DEFVAL { disable }
::= { ifConfigEntry 16 }
ifCEUnicastPeerCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of entries in the Unicast Peer Table corresponding to
this interface entry."
DEFVAL { 0 }
::= { ifConfigEntry 17 }
ifCEAcceptFilterCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of entries in the Accept Filter Table corresponding to
this interface entry."
DEFVAL { 0 }
::= { ifConfigEntry 18 }
ifCEAnnounceFilterCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of entries in the Announce Filter Table corresponding to
this interface entry."
DEFVAL { 0 }
::= { ifConfigEntry 19 }
--
-- Unicast Peer Table
--
--
-- For each interface a list of peers to which update messages are
-- unicast is maintained in this table. The use of the entries
-- corresponding to an interface is controlled by the
-- ifCEUnicastPeerMode variable in the interface configuration.
--
-- This table is indexed by an interface number and a peer router address.
--
ifUnicastPeersTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfUnicastPeersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of the peers routers to which update messages need
to be unicast"
::= { interface 3 }
ifUnicastPeersEntry OBJECT-TYPE
SYNTAX IfUnicastPeersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for a peer router for an interface"
INDEX { ifUPIfIndex, ifUPAddress }
::= { ifUnicastPeersTable 1 }
IfUnicastPeersEntry ::=
SEQUENCE {
ifUPIfIndex
INTEGER,
ifUPAddress
IpAddress,
ifUPTag
INTEGER
}
ifUPIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interface index corresponding to the interface with which this
peer router is associated."
::= { ifUnicastPeersEntry 1 }
ifUPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP Address of a peer router."
::= { ifUnicastPeersEntry 2 }
ifUPTag OBJECT-TYPE
SYNTAX INTEGER {
create(1),
delete(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"create : Creates an entry in the unicast peer table
delete : Deletes an entry in the unicast peer table
"
::= { ifUnicastPeersEntry 3 }
--
-- Accept Route Filter Table
--
--
-- For each interface the list of routes to be used to filter the set
-- of routes to be accepted over that interface is maintained in this
-- table. The use of the routes corresponding to an interface is
-- determined by the setting of the ifCEAcceptRouteFilterMode in the
-- interface configuration.
--
-- This table is indexed by an interface number and a peer router address.
--
ifAcceptRouteFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfAcceptRouteFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of the route filters used to filter the set of routes
accepted over an interface."
::= { interface 4 }
ifAcceptRouteFilterEntry OBJECT-TYPE
SYNTAX IfAcceptRouteFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for a route filter for an interface"
INDEX { ifAcceptRFIfIndex,
ifAcceptRFLoAddress,
ifAcceptRFHiAddress,
ifAcceptRFTag }
::= { ifAcceptRouteFilterTable 1 }
IfAcceptRouteFilterEntry ::=
SEQUENCE {
ifAcceptRFIfIndex
INTEGER,
ifAcceptRFLoAddress
IpAddress,
ifAcceptRFHiAddress
IpAddress,
ifAcceptRFTag
INTEGER
}
ifAcceptRFIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interface index corresponding to the interface to which this route
filter entry corresponds"
::= { ifAcceptRouteFilterEntry 1 }
ifAcceptRFLoAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Lowest address in the range of routes covered by this filter."
::= { ifAcceptRouteFilterEntry 2 }
ifAcceptRFHiAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Higher address in the range routes covered by this filter."
::= { ifAcceptRouteFilterEntry 3 }
ifAcceptRFTag OBJECT-TYPE
SYNTAX INTEGER {
create(1),
delete(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"create : Creates an entry in the Accept Route Filter table
delete : Deletes an entry in the Accept Route Filter table
"
::= { ifAcceptRouteFilterEntry 4 }
--
-- Announce Route Filter Table
--
--
-- For each interface the list of routes to be used to filter the set
-- of routes to be annouced over that interface is maintained in this
-- table. The use of the routes corresponding to an interface is
-- determined by the setting of the ifCEAnnounceRouteFilterMode in the
-- interface configuration.
--
-- This table is indexed by an interface number and a peer router address.
--
ifAnnounceRouteFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfAnnounceRouteFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of the route filters used to filter the set of routes
annouced over an interface."
::= { interface 5 }
ifAnnounceRouteFilterEntry OBJECT-TYPE
SYNTAX IfAnnounceRouteFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for a route filter for an interface."
INDEX { ifAnnounceRFIfIndex, ifAnnounceRFLoAddress, ifAnnounceRFHiAddress }
::= { ifAnnounceRouteFilterTable 1 }
IfAnnounceRouteFilterEntry ::=
SEQUENCE {
ifAnnounceRFIfIndex
INTEGER,
ifAnnounceRFLoAddress
IpAddress,
ifAnnounceRFHiAddress
IpAddress,
ifAnnounceRFTag
INTEGER
}
ifAnnounceRFIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interface index corresponding to the interface to which this route
filter entry corresponds"
::= { ifAnnounceRouteFilterEntry 1 }
ifAnnounceRFLoAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Lowest address in the range of routes covered by this filter."
::= { ifAnnounceRouteFilterEntry 2 }
ifAnnounceRFHiAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Higher address in the range routes covered by this filter."
::= { ifAnnounceRouteFilterEntry 3 }
ifAnnounceRFTag OBJECT-TYPE
SYNTAX INTEGER {
create(1),
delete(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"create : Creates an entry in the Announce Route Filter table
delete : Deletes an entry in the Announce Route Filter table
"
::= { ifAnnounceRouteFilterEntry 4 }
--
-- Interface Binding Table.
--
--
-- This table stores information pertaining to the binding state and the
-- number of IP addresses bound to an interface.
--
-- The list of IP address bound to an interface is maintained in the
-- Interface Address Table
--
ifBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfBindingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing binding information for each interface."
::= { interface 6 }
ifBindingEntry OBJECT-TYPE
SYNTAX IfBindingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Binding information entry for an interface"
INDEX { ifBindingIndex }
::= { ifBindingTable 1 }
IfBindingEntry ::=
SEQUENCE {
ifBindingIndex
INTEGER,
ifBindingState
INTEGER,
ifBindingCounts
Counter
}
ifBindingIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index corresponding to an interface entry in the binding table"
::= { ifBindingEntry 1 }
ifBindingState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
bound(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"State of the interface binding"
::= { ifBindingEntry 2 }
ifBindingCounts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of IP address bound to this interface. This is also the
number of entries in the Interface Address Table corresponding
to this interface."
::= { ifBindingEntry 3 }
--
-- Interface Address Table
--
--
-- The Interface Address Table contains the list of address bound to
-- each interface.
--
-- This table is indexed by an interface number and an IP address.
--
ifAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of IP addresses bound to interfaces"
::= { interface 7 }
ifAddressEntry OBJECT-TYPE
SYNTAX IfAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for an IP address for an interface"
INDEX { ifAEIfIndex, ifAEAddress, ifAEMask }
::= { ifAddressTable 1 }
IfAddressEntry ::=
SEQUENCE {
ifAEIfIndex
INTEGER,
ifAEAddress
IpAddress,
ifAEMask
IpAddress
}
ifAEIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index corresponding to the Interface with which this entry
is associated."
::= { ifAddressEntry 1 }
ifAEAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ip address bound to the associated interface."
::= { ifAddressEntry 2 }
ifAEMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Address Mask associated with the IP address contained in the
corresponding ifAEAddress field."
::= { ifAddressEntry 3 }
--
-- Peer Statistics Table.
--
--
-- This table contains statistics for each peer router that commnicates
-- with this router via RIP.
--
-- This table is indexed by the IP address of the peer router.
--
ifPeerStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfPeerStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of peer router statistics"
::= { peer 1}
ifPeerStatsEntry OBJECT-TYPE
SYNTAX IfPeerStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry corresponding to a peer router."
INDEX { ifPSAddress }
::= { ifPeerStatsTable 1 }
IfPeerStatsEntry ::=
SEQUENCE {
ifPSAddress
IpAddress,
ifPSLastPeerRouteTag
INTEGER,
ifPSLastPeerUpdateTickCount
TimeTicks,
ifPSLastPeerUpdateVersion
INTEGER,
ifPSPeerBadResponsePackets
Counter,
ifPSPeerBadResponseEntries
Counter
}
ifPSAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IP Address that the peer is using as its source address."
::= { ifPeerStatsEntry 1 }
ifPSLastPeerRouteTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The route-tag of the last route in the last RIP RESPONSE received
from this peer."
::= { ifPeerStatsEntry 2 }
ifPSLastPeerUpdateTickCount OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The tick-count in milliseconds at the time of the last RIP RESPONSE
received from this peer."
::= { ifPeerStatsEntry 3 }
ifPSLastPeerUpdateVersion OBJECT-TYPE
SYNTAX INTEGER ( 0..255 )
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The update version of the last RIP RESPONSE received from this peer."
::= { ifPeerStatsEntry 4 }
ifPSPeerBadResponsePackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of RIP RESPONSE packets which were received from this peer
and subsequently discarded."
::= { ifPeerStatsEntry 5 }
ifPSPeerBadResponseEntries OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of routes in RIP RESPONSE packets which were received
from this peer and subsequently discarded."
::= { ifPeerStatsEntry 6 }
END
Reference in a new issue Copy permalink