windows-nt/Source/XPSP1/NT/public/sdk/inc/allerror.h

1616 lines
32 KiB
C
Raw Permalink Normal View History

2020-09-26 03:20:57 -05:00
#ifndef _ALLERROR_H_
#define _ALLERROR_H_
#ifndef FACILITY_WINDOWS
//
// Values are 32 bit values layed out as follows:
//
// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
// +---+-+-+-----------------------+-------------------------------+
// |Sev|C|R| Facility | Code |
// +---+-+-+-----------------------+-------------------------------+
//
// where
//
// Sev - is the severity code
//
// 00 - Success
// 01 - Informational
// 10 - Warning
// 11 - Error
//
// C - is the Customer code flag
//
// R - is a reserved bit
//
// Facility - is the facility code
//
// Code - is the facility's status code
//
//
// Define the facility codes
//
#define FACILITY_WINDOWS 0x8
#define FACILITY_ITF 0x4
//
// Define the severity codes
//
#define STATUS_SEVERITY_SUCCESS 0x0
#define STATUS_SEVERITY_COFAIL 0x3
#define STATUS_SEVERITY_COERROR 0x2
//
// MessageId: NOT_AN_ERROR
//
// MessageText:
//
// NOTE: This dummy error message is necessary to force MC to output
// the above defines inside the FACILITY_WINDOWS guard instead
// of leaving it empty.
//
#define NOT_AN_ERROR ((HRESULT)0x00080000L)
#endif // FACILITY_WINDOWS
//
// Codes 0x1000-0x10ff are reserved for the SYSMGMT component controls
// interfaces.
//
//
// MessageId: CTRL_E_NO_RESOURCE
//
// MessageText:
//
// A control failure has occured because a system resource could not be obtained
//
#define CTRL_E_NO_RESOURCE ((HRESULT)0x80081000L)
//
// Codes 0x0e00-0x0f9f are reserved for the SYSMGMT control panel
// interfaces.
//
// The following ranges are to prevent slm merge collisions during the initial
// error code checkins. These ranges will be revised when we have a better
// idea of the actual number of error codes for each component.
//
// MessageId: CPANEL_E_NOTTARGETED
//
// MessageText:
//
// This control panel does not target the required type of profile.
//
#define CPANEL_E_NOTTARGETED ((HRESULT)0x80080E00L)
//
// MessageId: CPANEL_E_DROPDATAREAD
//
// MessageText:
//
// The profile data dropped on a control panel cannot be read. The data
// is either corrupt or was not read back properly by a controller that wrote
// part of the data.
//
#define CPANEL_E_DROPDATAREAD ((HRESULT)0x80080E01L)
//
// MessageId: CPANEL_E_LOCALONLY
//
// MessageText:
//
// A controller that can only operate on the local machine was asked to operate
// on a remote machine.
//
#define CPANEL_E_LOCALONLY ((HRESULT)0x80080E02L)
//
// Codes 0x1200-0x14ff are reserved for the SYSMGMT project in general
// interfaces.
//
// INSTRUM error codes below here (Starts at 0x1200)
// INSTRUM error codes above here
// SWM error codes below here (Starts at 0x1300)
//
// MessageId: SWM_E_INVALIDPDF
//
// MessageText:
//
// The file is not a valid PDF.
//
#define SWM_E_INVALIDPDF ((HRESULT)0x80081300L)
//
// MessageId: SWM_E_INVALIDPDFVERSION
//
// MessageText:
//
// Software Management does not support this version of the PDF.
//
#define SWM_E_INVALIDPDFVERSION ((HRESULT)0x80081301L)
//
// MessageId: SWM_E_INTERNALERROR
//
// MessageText:
//
// An internal error has occurred in Software Management.
//
#define SWM_E_INTERNALERROR ((HRESULT)0x80081302L)
// SWM error codes above here
// USER error codes below here (Starts at 0x1400)
// USER error codes above here
#ifndef _MSADERR_H_
#define _MSADERR_H_
#ifndef FACILITY_WINDOWS
//+---------------------------------------------------------------------------
//
// Microsoft OLE DB
// Copyright (c) Microsoft Corporation. All rights reserved.
//
//----------------------------------------------------------------------------
//
// MessageId: DB_E_BOGUS
//
// MessageText:
//
// Dummy error - need this error so that mc puts the above defines
// inside the FACILITY_WINDOWS guard, instead of leaving it empty
//
#define DB_E_BOGUS ((HRESULT)0x80040EFFL)
#endif // FACILITY_WINDOWS
//
// Codes 0x0e00-0x0eff are reserved for the OLE DB group of
// interfaces.
//
// Free codes are:
//
// Error:
// -none-
//
// Success:
// 0x0eea
// 0x0ed7
//
//
// OLEDBVER
// OLE DB version number (0x0200); this can be overridden with an older
// version number if necessary
//
// If OLEDBVER is not defined, assume version 2.0
#ifndef OLEDBVER
#define OLEDBVER 0x0200
#endif
//
// MessageId: DB_E_BADACCESSORHANDLE
//
// MessageText:
//
// Invalid accessor
//
#define DB_E_BADACCESSORHANDLE ((HRESULT)0x80040E00L)
//
// MessageId: DB_E_ROWLIMITEXCEEDED
//
// MessageText:
//
// Creating another row would have exceeded the total number of active
// rows supported by the rowset
//
#define DB_E_ROWLIMITEXCEEDED ((HRESULT)0x80040E01L)
//
// MessageId: DB_E_READONLYACCESSOR
//
// MessageText:
//
// Unable to write with a read-only accessor
//
#define DB_E_READONLYACCESSOR ((HRESULT)0x80040E02L)
//
// MessageId: DB_E_SCHEMAVIOLATION
//
// MessageText:
//
// Given values violate the database schema
//
#define DB_E_SCHEMAVIOLATION ((HRESULT)0x80040E03L)
//
// MessageId: DB_E_BADROWHANDLE
//
// MessageText:
//
// Invalid row handle
//
#define DB_E_BADROWHANDLE ((HRESULT)0x80040E04L)
//
// MessageId: DB_E_OBJECTOPEN
//
// MessageText:
//
// An object was open
//
#define DB_E_OBJECTOPEN ((HRESULT)0x80040E05L)
//@@@+ V1.5
#if( OLEDBVER >= 0x0150 )
//
// MessageId: DB_E_BADCHAPTER
//
// MessageText:
//
// Invalid chapter
//
#define DB_E_BADCHAPTER ((HRESULT)0x80040E06L)
#endif // OLEDBVER >= 0x0150
//@@@- V1.5
//
// MessageId: DB_E_CANTCONVERTVALUE
//
// MessageText:
//
// A literal value in the command could not be converted to the
// correct type due to a reason other than data overflow
//
#define DB_E_CANTCONVERTVALUE ((HRESULT)0x80040E07L)
//
// MessageId: DB_E_BADBINDINFO
//
// MessageText:
//
// Invalid binding info
//
#define DB_E_BADBINDINFO ((HRESULT)0x80040E08L)
//
// MessageId: DB_SEC_E_PERMISSIONDENIED
//
// MessageText:
//
// Permission denied
//
#define DB_SEC_E_PERMISSIONDENIED ((HRESULT)0x80040E09L)
//
// MessageId: DB_E_NOTAREFERENCECOLUMN
//
// MessageText:
//
// Specified column does not contain bookmarks or chapters
//
#define DB_E_NOTAREFERENCECOLUMN ((HRESULT)0x80040E0AL)
//@@@+ V2.5
#if( OLEDBVER >= 0x0250 )
//
// MessageId: DB_E_LIMITREJECTED
//
// MessageText:
//
// Some cost limits were rejected
//
#define DB_E_LIMITREJECTED ((HRESULT)0x80040E0BL)
#endif // OLEDBVER >= 0x0250
//@@@- V2.5
//
// MessageId: DB_E_NOCOMMAND
//
// MessageText:
//
// No command has been set for the command object
//
#define DB_E_NOCOMMAND ((HRESULT)0x80040E0CL)
//@@@+ V2.5
#if( OLEDBVER >= 0x0250 )
//
// MessageId: DB_E_COSTLIMIT
//
// MessageText:
//
// Unable to find a query plan within the given cost limit
//
#define DB_E_COSTLIMIT ((HRESULT)0x80040E0DL)
#endif // OLEDBVER >= 0x0250
//@@@- V2.5
//
// MessageId: DB_E_BADBOOKMARK
//
// MessageText:
//
// Invalid bookmark
//
#define DB_E_BADBOOKMARK ((HRESULT)0x80040E0EL)
//
// MessageId: DB_E_BADLOCKMODE
//
// MessageText:
//
// Invalid lock mode
//
#define DB_E_BADLOCKMODE ((HRESULT)0x80040E0FL)
//
// MessageId: DB_E_PARAMNOTOPTIONAL
//
// MessageText:
//
// No value given for one or more required parameters
//
#define DB_E_PARAMNOTOPTIONAL ((HRESULT)0x80040E10L)
//
// MessageId: DB_E_BADCOLUMNID
//
// MessageText:
//
// Invalid column ID
//
#define DB_E_BADCOLUMNID ((HRESULT)0x80040E11L)
//
// MessageId: DB_E_BADRATIO
//
// MessageText:
//
// Invalid ratio
//
#define DB_E_BADRATIO ((HRESULT)0x80040E12L)
//@@@+ V2.0
#if( OLEDBVER >= 0x0200 )
//
// MessageId: DB_E_BADVALUES
//
// MessageText:
//
// Invalid value
//
#define DB_E_BADVALUES ((HRESULT)0x80040E13L)
#endif // OLEDBVER >= 0x0200
//@@@- V2.0
//
// MessageId: DB_E_ERRORSINCOMMAND
//
// MessageText:
//
// The command contained one or more errors
//
#define DB_E_ERRORSINCOMMAND ((HRESULT)0x80040E14L)
//
// MessageId: DB_E_CANTCANCEL
//
// MessageText:
//
// The executing command cannot be canceled
//
#define DB_E_CANTCANCEL ((HRESULT)0x80040E15L)
//
// MessageId: DB_E_DIALECTNOTSUPPORTED
//
// MessageText:
//
// The provider does not support the specified dialect
//
#define DB_E_DIALECTNOTSUPPORTED ((HRESULT)0x80040E16L)
//
// MessageId: DB_E_DUPLICATEDATASOURCE
//
// MessageText:
//
// A data source with the specified name already exists
//
#define DB_E_DUPLICATEDATASOURCE ((HRESULT)0x80040E17L)
//
// MessageId: DB_E_CANNOTRESTART
//
// MessageText:
//
// The rowset was built over a live data feed and cannot be restarted
//
#define DB_E_CANNOTRESTART ((HRESULT)0x80040E18L)
//
// MessageId: DB_E_NOTFOUND
//
// MessageText:
//
// No key matching the described characteristics could be found within
// the current range
//
#define DB_E_NOTFOUND ((HRESULT)0x80040E19L)
//
// MessageId: DB_E_NEWLYINSERTED
//
// MessageText:
//
// The provider is unable to determine identity for newly inserted
// rows
//
#define DB_E_NEWLYINSERTED ((HRESULT)0x80040E1BL)
//@@@+ V2.5
#if( OLEDBVER >= 0x0250 )
//
// MessageId: DB_E_CANNOTFREE
//
// MessageText:
//
// Ownership of this tree has been given to the provider
//
#define DB_E_CANNOTFREE ((HRESULT)0x80040E1AL)
//
// MessageId: DB_E_GOALREJECTED
//
// MessageText:
//
// No nonzero weights specified for any goals supported, so goal was
// rejected; current goal was not changed
//
#define DB_E_GOALREJECTED ((HRESULT)0x80040E1CL)
#endif // OLEDBVER >= 0x0250
//@@@- V2.5
//
// MessageId: DB_E_UNSUPPORTEDCONVERSION
//
// MessageText:
//
// Requested conversion is not supported
//
#define DB_E_UNSUPPORTEDCONVERSION ((HRESULT)0x80040E1DL)
//
// MessageId: DB_E_BADSTARTPOSITION
//
// MessageText:
//
// lRowsOffset would position you past either end of the rowset,
// regardless of the cRows value specified; cRowsObtained is 0
//
#define DB_E_BADSTARTPOSITION ((HRESULT)0x80040E1EL)
//@@@+ V2.0
#if( OLEDBVER >= 0x0200 )
//
// MessageId: DB_E_NOQUERY
//
// MessageText:
//
// Information was requested for a query, and the query was not set
//
#define DB_E_NOQUERY ((HRESULT)0x80040E1FL)
#endif // OLEDBVER >= 0x0200
//@@@- V2.0
//
// MessageId: DB_E_NOTREENTRANT
//
// MessageText:
//
// Provider called a method from IRowsetNotify in the consumer and the
// method has not yet returned
//
#define DB_E_NOTREENTRANT ((HRESULT)0x80040E20L)
//
// MessageId: DB_E_ERRORSOCCURRED
//
// MessageText:
//
// Errors occurred
//
#define DB_E_ERRORSOCCURRED ((HRESULT)0x80040E21L)
//
// MessageId: DB_E_NOAGGREGATION
//
// MessageText:
//
// A non-NULL controlling IUnknown was specified and the object being
// created does not support aggregation
//
#define DB_E_NOAGGREGATION ((HRESULT)0x80040E22L)
//
// MessageId: DB_E_DELETEDROW
//
// MessageText:
//
// A given HROW referred to a hard- or soft-deleted row
//
#define DB_E_DELETEDROW ((HRESULT)0x80040E23L)
//
// MessageId: DB_E_CANTFETCHBACKWARDS
//
// MessageText:
//
// The rowset does not support fetching backwards
//
#define DB_E_CANTFETCHBACKWARDS ((HRESULT)0x80040E24L)
//
// MessageId: DB_E_ROWSNOTRELEASED
//
// MessageText:
//
// All HROWs must be released before new ones can be obtained
//
#define DB_E_ROWSNOTRELEASED ((HRESULT)0x80040E25L)
//
// MessageId: DB_E_BADSTORAGEFLAG
//
// MessageText:
//
// One of the specified storage flags was not supported
//
#define DB_E_BADSTORAGEFLAG ((HRESULT)0x80040E26L)
//@@@+ V1.5
#if( OLEDBVER >= 0x0150 )
//
// MessageId: DB_E_BADCOMPAREOP
//
// MessageText:
//
// The comparison operator was invalid
//
#define DB_E_BADCOMPAREOP ((HRESULT)0x80040E27L)
#endif // OLEDBVER >= 0x0150
//@@@- V1.5
//
// MessageId: DB_E_BADSTATUSVALUE
//
// MessageText:
//
// The specified status flag was neither DBCOLUMNSTATUS_OK nor
// DBCOLUMNSTATUS_ISNULL
//
#define DB_E_BADSTATUSVALUE ((HRESULT)0x80040E28L)
//
// MessageId: DB_E_CANTSCROLLBACKWARDS
//
// MessageText:
//
// The rowset cannot scroll backwards
//
#define DB_E_CANTSCROLLBACKWARDS ((HRESULT)0x80040E29L)
//@@@+ V2.5
#if( OLEDBVER >= 0x0250 )
//
// MessageId: DB_E_BADREGIONHANDLE
//
// MessageText:
//
// Invalid region handle
//
#define DB_E_BADREGIONHANDLE ((HRESULT)0x80040E2AL)
//
// MessageId: DB_E_NONCONTIGUOUSRANGE
//
// MessageText:
//
// The specified set of rows was not contiguous to or overlapping the
// rows in the specified watch region
//
#define DB_E_NONCONTIGUOUSRANGE ((HRESULT)0x80040E2BL)
//
// MessageId: DB_E_INVALIDTRANSITION
//
// MessageText:
//
// A transition from ALL* to MOVE* or EXTEND* was specified
//
#define DB_E_INVALIDTRANSITION ((HRESULT)0x80040E2CL)
//
// MessageId: DB_E_NOTASUBREGION
//
// MessageText:
//
// The specified region is not a proper subregion of the region
// identified by the given watch region handle
//
#define DB_E_NOTASUBREGION ((HRESULT)0x80040E2DL)
#endif // OLEDBVER >= 0x0250
//@@@- V2.5
//
// MessageId: DB_E_MULTIPLESTATEMENTS
//
// MessageText:
//
// The provider does not support multi-statement commands
//
#define DB_E_MULTIPLESTATEMENTS ((HRESULT)0x80040E2EL)
//
// MessageId: DB_E_INTEGRITYVIOLATION
//
// MessageText:
//
// A specified value violated the integrity constraints for a column or
// table
//
#define DB_E_INTEGRITYVIOLATION ((HRESULT)0x80040E2FL)
//
// MessageId: DB_E_BADTYPENAME
//
// MessageText:
//
// The given type name was unrecognized
//
#define DB_E_BADTYPENAME ((HRESULT)0x80040E30L)
//
// MessageId: DB_E_ABORTLIMITREACHED
//
// MessageText:
//
// Execution aborted because a resource limit has been reached; no
// results have been returned
//
#define DB_E_ABORTLIMITREACHED ((HRESULT)0x80040E31L)
//@@@+ V2.0
#if( OLEDBVER >= 0x0200 )
//
// MessageId: DB_E_ROWSETINCOMMAND
//
// MessageText:
//
// Cannot clone a command object whose command tree contains a rowset
// or rowsets
//
#define DB_E_ROWSETINCOMMAND ((HRESULT)0x80040E32L)
//
// MessageId: DB_E_CANTTRANSLATE
//
// MessageText:
//
// Cannot represent the current tree as text
//
#define DB_E_CANTTRANSLATE ((HRESULT)0x80040E33L)
#endif // OLEDBVER >= 0x0200
//@@@- V2.0
//
// MessageId: DB_E_DUPLICATEINDEXID
//
// MessageText:
//
// The specified index already exists
//
#define DB_E_DUPLICATEINDEXID ((HRESULT)0x80040E34L)
//
// MessageId: DB_E_NOINDEX
//
// MessageText:
//
// The specified index does not exist
//
#define DB_E_NOINDEX ((HRESULT)0x80040E35L)
//
// MessageId: DB_E_INDEXINUSE
//
// MessageText:
//
// The specified index was in use
//
#define DB_E_INDEXINUSE ((HRESULT)0x80040E36L)
//
// MessageId: DB_E_NOTABLE
//
// MessageText:
//
// The specified table does not exist
//
#define DB_E_NOTABLE ((HRESULT)0x80040E37L)
//
// MessageId: DB_E_CONCURRENCYVIOLATION
//
// MessageText:
//
// The rowset was using optimistic concurrency and the value of a
// column has been changed since it was last read
//
#define DB_E_CONCURRENCYVIOLATION ((HRESULT)0x80040E38L)
//
// MessageId: DB_E_BADCOPY
//
// MessageText:
//
// Errors were detected during the copy
//
#define DB_E_BADCOPY ((HRESULT)0x80040E39L)
//
// MessageId: DB_E_BADPRECISION
//
// MessageText:
//
// A specified precision was invalid
//
#define DB_E_BADPRECISION ((HRESULT)0x80040E3AL)
//
// MessageId: DB_E_BADSCALE
//
// MessageText:
//
// A specified scale was invalid
//
#define DB_E_BADSCALE ((HRESULT)0x80040E3BL)
//
// MessageId: DB_E_BADTABLEID
//
// MessageText:
//
// Invalid table ID
//
#define DB_E_BADTABLEID ((HRESULT)0x80040E3CL)
// DB_E_BADID is deprecated; use DB_E_BADTABLEID instead
#define DB_E_BADID DB_E_BADTABLEID
//
// MessageId: DB_E_BADTYPE
//
// MessageText:
//
// A specified type was invalid
//
#define DB_E_BADTYPE ((HRESULT)0x80040E3DL)
//
// MessageId: DB_E_DUPLICATECOLUMNID
//
// MessageText:
//
// A column ID was occurred more than once in the specification
//
#define DB_E_DUPLICATECOLUMNID ((HRESULT)0x80040E3EL)
//
// MessageId: DB_E_DUPLICATETABLEID
//
// MessageText:
//
// The specified table already exists
//
#define DB_E_DUPLICATETABLEID ((HRESULT)0x80040E3FL)
//
// MessageId: DB_E_TABLEINUSE
//
// MessageText:
//
// The specified table was in use
//
#define DB_E_TABLEINUSE ((HRESULT)0x80040E40L)
//
// MessageId: DB_E_NOLOCALE
//
// MessageText:
//
// The specified locale ID was not supported
//
#define DB_E_NOLOCALE ((HRESULT)0x80040E41L)
//
// MessageId: DB_E_BADRECORDNUM
//
// MessageText:
//
// The specified record number is invalid
//
#define DB_E_BADRECORDNUM ((HRESULT)0x80040E42L)
//
// MessageId: DB_E_BOOKMARKSKIPPED
//
// MessageText:
//
// Although the bookmark was validly formed, no row could be found to
// match it
//
#define DB_E_BOOKMARKSKIPPED ((HRESULT)0x80040E43L)
//
// MessageId: DB_E_BADPROPERTYVALUE
//
// MessageText:
//
// The value of a property was invalid
//
#define DB_E_BADPROPERTYVALUE ((HRESULT)0x80040E44L)
//
// MessageId: DB_E_INVALID
//
// MessageText:
//
// The rowset was not chaptered
//
#define DB_E_INVALID ((HRESULT)0x80040E45L)
//
// MessageId: DB_E_BADACCESSORFLAGS
//
// MessageText:
//
// Invalid accessor
//
#define DB_E_BADACCESSORFLAGS ((HRESULT)0x80040E46L)
//
// MessageId: DB_E_BADSTORAGEFLAGS
//
// MessageText:
//
// Invalid storage flags
//
#define DB_E_BADSTORAGEFLAGS ((HRESULT)0x80040E47L)
//
// MessageId: DB_E_BYREFACCESSORNOTSUPPORTED
//
// MessageText:
//
// By-ref accessors are not supported by this provider
//
#define DB_E_BYREFACCESSORNOTSUPPORTED ((HRESULT)0x80040E48L)
//
// MessageId: DB_E_NULLACCESSORNOTSUPPORTED
//
// MessageText:
//
// Null accessors are not supported by this provider
//
#define DB_E_NULLACCESSORNOTSUPPORTED ((HRESULT)0x80040E49L)
//
// MessageId: DB_E_NOTPREPARED
//
// MessageText:
//
// The command was not prepared
//
#define DB_E_NOTPREPARED ((HRESULT)0x80040E4AL)
//
// MessageId: DB_E_BADACCESSORTYPE
//
// MessageText:
//
// The specified accessor was not a parameter accessor
//
#define DB_E_BADACCESSORTYPE ((HRESULT)0x80040E4BL)
//
// MessageId: DB_E_WRITEONLYACCESSOR
//
// MessageText:
//
// The given accessor was write-only
//
#define DB_E_WRITEONLYACCESSOR ((HRESULT)0x80040E4CL)
//
// MessageId: DB_SEC_E_AUTH_FAILED
//
// MessageText:
//
// Authentication failed
//
#define DB_SEC_E_AUTH_FAILED ((HRESULT)0x80040E4DL)
//
// MessageId: DB_E_CANCELED
//
// MessageText:
//
// The change was canceled during notification; no columns are changed
//
#define DB_E_CANCELED ((HRESULT)0x80040E4EL)
//@@@+ V2.0
#if( OLEDBVER >= 0x0200 )
//
// MessageId: DB_E_CHAPTERNOTRELEASED
//
// MessageText:
//
// The rowset was single-chaptered and the chapter was not released
//
#define DB_E_CHAPTERNOTRELEASED ((HRESULT)0x80040E4FL)
#endif // OLEDBVER >= 0x0200
//@@@- V2.0
//
// MessageId: DB_E_BADSOURCEHANDLE
//
// MessageText:
//
// Invalid source handle
//
#define DB_E_BADSOURCEHANDLE ((HRESULT)0x80040E50L)
//
// MessageId: DB_E_PARAMUNAVAILABLE
//
// MessageText:
//
// The provider cannot derive parameter info and SetParameterInfo has
// not been called
//
#define DB_E_PARAMUNAVAILABLE ((HRESULT)0x80040E51L)
//
// MessageId: DB_E_ALREADYINITIALIZED
//
// MessageText:
//
// The data source object is already initialized
//
#define DB_E_ALREADYINITIALIZED ((HRESULT)0x80040E52L)
//
// MessageId: DB_E_NOTSUPPORTED
//
// MessageText:
//
// The provider does not support this method
//
#define DB_E_NOTSUPPORTED ((HRESULT)0x80040E53L)
//
// MessageId: DB_E_MAXPENDCHANGESEXCEEDED
//
// MessageText:
//
// The number of rows with pending changes has exceeded the set limit
//
#define DB_E_MAXPENDCHANGESEXCEEDED ((HRESULT)0x80040E54L)
//
// MessageId: DB_E_BADORDINAL
//
// MessageText:
//
// The specified column did not exist
//
#define DB_E_BADORDINAL ((HRESULT)0x80040E55L)
//
// MessageId: DB_E_PENDINGCHANGES
//
// MessageText:
//
// There are pending changes on a row with a reference count of zero
//
#define DB_E_PENDINGCHANGES ((HRESULT)0x80040E56L)
//
// MessageId: DB_E_DATAOVERFLOW
//
// MessageText:
//
// A literal value in the command overflowed the range of the type of
// the associated column
//
#define DB_E_DATAOVERFLOW ((HRESULT)0x80040E57L)
//
// MessageId: DB_E_BADHRESULT
//
// MessageText:
//
// The supplied HRESULT was invalid
//
#define DB_E_BADHRESULT ((HRESULT)0x80040E58L)
//
// MessageId: DB_E_BADLOOKUPID
//
// MessageText:
//
// The supplied LookupID was invalid
//
#define DB_E_BADLOOKUPID ((HRESULT)0x80040E59L)
//
// MessageId: DB_E_BADDYNAMICERRORID
//
// MessageText:
//
// The supplied DynamicErrorID was invalid
//
#define DB_E_BADDYNAMICERRORID ((HRESULT)0x80040E5AL)
//
// MessageId: DB_E_PENDINGINSERT
//
// MessageText:
//
// Unable to get visible data for a newly-inserted row that has not
// yet been updated
//
#define DB_E_PENDINGINSERT ((HRESULT)0x80040E5BL)
//
// MessageId: DB_E_BADCONVERTFLAG
//
// MessageText:
//
// Invalid conversion flag
//
#define DB_E_BADCONVERTFLAG ((HRESULT)0x80040E5CL)
//
// MessageId: DB_E_BADPARAMETERNAME
//
// MessageText:
//
// The given parameter name was unrecognized
//
#define DB_E_BADPARAMETERNAME ((HRESULT)0x80040E5DL)
//
// MessageId: DB_E_MULTIPLESTORAGE
//
// MessageText:
//
// Multiple storage objects can not be open simultaneously
//
#define DB_E_MULTIPLESTORAGE ((HRESULT)0x80040E5EL)
//
// MessageId: DB_E_CANTFILTER
//
// MessageText:
//
// The requested filter could not be opened
//
#define DB_E_CANTFILTER ((HRESULT)0x80040E5FL)
//
// MessageId: DB_E_CANTORDER
//
// MessageText:
//
// The requested order could not be opened
//
#define DB_E_CANTORDER ((HRESULT)0x80040E60L)
//@@@+ V2.0
#if( OLEDBVER >= 0x0200 )
//
// MessageId: MD_E_BADTUPLE
//
// MessageText:
//
// Bad tuple
//
#define MD_E_BADTUPLE ((HRESULT)0x80040E61L)
//
// MessageId: MD_E_BADCOORDINATE
//
// MessageText:
//
// Bad coordinate
//
#define MD_E_BADCOORDINATE ((HRESULT)0x80040E62L)
//
// MessageId: MD_E_INVALIDAXIS
//
// MessageText:
//
// The given aixs was not valid for this Dataset
//
#define MD_E_INVALIDAXIS ((HRESULT)0x80040E63L)
//
// MessageId: MD_E_INVALIDCELLRANGE
//
// MessageText:
//
// One or more of the given cell ordinals was invalid
//
#define MD_E_INVALIDCELLRANGE ((HRESULT)0x80040E64L)
//
// MessageId: DB_E_NOCOLUMN
//
// MessageText:
//
// The supplied columnID was invalid
//
#define DB_E_NOCOLUMN ((HRESULT)0x80040E65L)
//
// MessageId: DB_E_COMMANDNOTPERSISTED
//
// MessageText:
//
// The supplied command does not have a DBID
//
#define DB_E_COMMANDNOTPERSISTED ((HRESULT)0x80040E67L)
//
// MessageId: DB_E_DUPLICATEID
//
// MessageText:
//
// The supplied DBID already exists
//
#define DB_E_DUPLICATEID ((HRESULT)0x80040E68L)
//
// MessageId: DB_E_OBJECTCREATIONLIMITREACHED
//
// MessageText:
//
// The maximum number of Sessions supported by the provider has
// already been created. The consumer must release one or more
// currently held Sessions before obtaining a new Session Object
//
#define DB_E_OBJECTCREATIONLIMITREACHED ((HRESULT)0x80040E69L)
//
// MessageId: DB_E_BADINDEXID
//
// MessageText:
//
// The index ID is invalid
//
#define DB_E_BADINDEXID ((HRESULT)0x80040E72L)
//
// MessageId: DB_E_BADINITSTRING
//
// MessageText:
//
// The initialization string specified does not conform to specificiation
//
#define DB_E_BADINITSTRING ((HRESULT)0x80040E73L)
//
// MessageId: DB_E_NOPROVIDERSREGISTERED
//
// MessageText:
//
// The OLE DB root enumerator did not return any providers that
// matched any of the SOURCES_TYPEs requested
//
#define DB_E_NOPROVIDERSREGISTERED ((HRESULT)0x80040E74L)
//
// MessageId: DB_E_MISMATCHEDPROVIDER
//
// MessageText:
//
// The initialization string specifies a provider which does not match the currently active provider
//
#define DB_E_MISMATCHEDPROVIDER ((HRESULT)0x80040E75L)
#endif // OLEDBVER >= 0x0200
//@@@- V2.0
//@@@+ V2.1
#if( OLEDBVER >= 0x0210 )
#define SEC_E_PERMISSIONDENIED DB_SEC_E_PERMISSIONDENIED
//
// MessageId: SEC_E_BADTRUSTEEID
//
// MessageText:
//
// Invalid trustee value
//
#define SEC_E_BADTRUSTEEID ((HRESULT)0x80040E6AL)
//
// MessageId: SEC_E_NOTRUSTEEID
//
// MessageText:
//
// The trustee is not for the current data source
//
#define SEC_E_NOTRUSTEEID ((HRESULT)0x80040E6BL)
//
// MessageId: SEC_E_NOMEMBERSHIPSUPPORT
//
// MessageText:
//
// The trustee does not support memberships/collections
//
#define SEC_E_NOMEMBERSHIPSUPPORT ((HRESULT)0x80040E6CL)
//
// MessageId: SEC_E_INVALIDOBJECT
//
// MessageText:
//
// The object is invalid or unknown to the provider
//
#define SEC_E_INVALIDOBJECT ((HRESULT)0x80040E6DL)
//
// MessageId: SEC_E_NOOWNER
//
// MessageText:
//
// No owner exists for the object
//
#define SEC_E_NOOWNER ((HRESULT)0x80040E6EL)
//
// MessageId: SEC_E_INVALIDACCESSENTRYLIST
//
// MessageText:
//
// The access entry list supplied is invalid
//
#define SEC_E_INVALIDACCESSENTRYLIST ((HRESULT)0x80040E6FL)
//
// MessageId: SEC_E_INVALIDOWNER
//
// MessageText:
//
// The trustee supplied as owner is invalid or unknown to the provider
//
#define SEC_E_INVALIDOWNER ((HRESULT)0x80040E70L)
//
// MessageId: SEC_E_INVALIDACCESSENTRY
//
// MessageText:
//
// The permission supplied in the access entry list is invalid
//
#define SEC_E_INVALIDACCESSENTRY ((HRESULT)0x80040E71L)
#endif // OLEDBVER >= 0x0210
//@@@- V2.1
//
// MessageId: DB_S_ROWLIMITEXCEEDED
//
// MessageText:
//
// Fetching requested number of rows would have exceeded total number
// of active rows supported by the rowset
//
#define DB_S_ROWLIMITEXCEEDED ((HRESULT)0x00040EC0L)
//
// MessageId: DB_S_COLUMNTYPEMISMATCH
//
// MessageText:
//
// One or more column types are incompatible; conversion errors will
// occur during copying
//
#define DB_S_COLUMNTYPEMISMATCH ((HRESULT)0x00040EC1L)
//
// MessageId: DB_S_TYPEINFOOVERRIDDEN
//
// MessageText:
//
// Parameter type information has been overridden by caller
//
#define DB_S_TYPEINFOOVERRIDDEN ((HRESULT)0x00040EC2L)
//
// MessageId: DB_S_BOOKMARKSKIPPED
//
// MessageText:
//
// Skipped bookmark for deleted or non-member row
//
#define DB_S_BOOKMARKSKIPPED ((HRESULT)0x00040EC3L)
//@@@+ V2.0
#if( OLEDBVER >= 0x0200 )
//
// MessageId: DB_S_NONEXTROWSET
//
// MessageText:
//
// There are no more rowsets
//
#define DB_S_NONEXTROWSET ((HRESULT)0x00040EC5L)
#endif // OLEDBVER >= 0x0200
//@@@- V2.0
//
// MessageId: DB_S_ENDOFROWSET
//
// MessageText:
//
// Reached start or end of rowset or chapter
//
#define DB_S_ENDOFROWSET ((HRESULT)0x00040EC6L)
//
// MessageId: DB_S_COMMANDREEXECUTED
//
// MessageText:
//
// The provider re-executed the command
//
#define DB_S_COMMANDREEXECUTED ((HRESULT)0x00040EC7L)
//
// MessageId: DB_S_BUFFERFULL
//
// MessageText:
//
// Variable data buffer full
//
#define DB_S_BUFFERFULL ((HRESULT)0x00040EC8L)
//
// MessageId: DB_S_NORESULT
//
// MessageText:
//
// There are no more results
//
#define DB_S_NORESULT ((HRESULT)0x00040EC9L)
//
// MessageId: DB_S_CANTRELEASE
//
// MessageText:
//
// Server cannot release or downgrade a lock until the end of the
// transaction
//
#define DB_S_CANTRELEASE ((HRESULT)0x00040ECAL)
//@@@+ V2.5
#if( OLEDBVER >= 0x0250 )
//
// MessageId: DB_S_GOALCHANGED
//
// MessageText:
//
// Specified weight was not supported or exceeded the supported limit
// and was set to 0 or the supported limit
//
#define DB_S_GOALCHANGED ((HRESULT)0x00040ECBL)
#endif // OLEDBVER >= 0x0250
//@@@- V2.5
//@@@+ V1.5
#if( OLEDBVER >= 0x0150 )
//
// MessageId: DB_S_UNWANTEDOPERATION
//
// MessageText:
//
// Consumer is uninterested in receiving further notification calls for
// this reason
//
#define DB_S_UNWANTEDOPERATION ((HRESULT)0x00040ECCL)
#endif // OLEDBVER >= 0x0150
//@@@- V1.5
//
// MessageId: DB_S_DIALECTIGNORED
//
// MessageText:
//
// Input dialect was ignored and text was returned in different
// dialect
//
#define DB_S_DIALECTIGNORED ((HRESULT)0x00040ECDL)
//
// MessageId: DB_S_UNWANTEDPHASE
//
// MessageText:
//
// Consumer is uninterested in receiving further notification calls for
// this phase
//
#define DB_S_UNWANTEDPHASE ((HRESULT)0x00040ECEL)
//
// MessageId: DB_S_UNWANTEDREASON
//
// MessageText:
//
// Consumer is uninterested in receiving further notification calls for
// this reason
//
#define DB_S_UNWANTEDREASON ((HRESULT)0x00040ECFL)
//@@@+ V1.5
#if( OLEDBVER >= 0x0150 )
//
// MessageId: DB_S_ASYNCHRONOUS
//
// MessageText:
//
// The operation is being processed asynchronously
//
#define DB_S_ASYNCHRONOUS ((HRESULT)0x00040ED0L)
#endif // OLEDBVER >= 0x0150
//@@@- V1.5
//
// MessageId: DB_S_COLUMNSCHANGED
//
// MessageText:
//
// In order to reposition to the start of the rowset, the provider had
// to reexecute the query; either the order of the columns changed or
// columns were added to or removed from the rowset
//
#define DB_S_COLUMNSCHANGED ((HRESULT)0x00040ED1L)
//
// MessageId: DB_S_ERRORSRETURNED
//
// MessageText:
//
// The method had some errors; errors have been returned in the error
// array
//
#define DB_S_ERRORSRETURNED ((HRESULT)0x00040ED2L)
//
// MessageId: DB_S_BADROWHANDLE
//
// MessageText:
//
// Invalid row handle
//
#define DB_S_BADROWHANDLE ((HRESULT)0x00040ED3L)
//
// MessageId: DB_S_DELETEDROW
//
// MessageText:
//
// A given HROW referred to a hard-deleted row
//
#define DB_S_DELETEDROW ((HRESULT)0x00040ED4L)
//@@@+ V2.5
#if( OLEDBVER >= 0x0250 )
//
// MessageId: DB_S_TOOMANYCHANGES
//
// MessageText:
//
// The provider was unable to keep track of all the changes; the client
// must refetch the data associated with the watch region using another
// method
//
#define DB_S_TOOMANYCHANGES ((HRESULT)0x00040ED5L)
#endif // OLEDBVER >= 0x0250
//@@@- V2.5
//
// MessageId: DB_S_STOPLIMITREACHED
//
// MessageText:
//
// Execution stopped because a resource limit has been reached; results
// obtained so far have been returned but execution cannot be resumed
//
#define DB_S_STOPLIMITREACHED ((HRESULT)0x00040ED6L)
//
// MessageId: DB_S_LOCKUPGRADED
//
// MessageText:
//
// A lock was upgraded from the value specified
//
#define DB_S_LOCKUPGRADED ((HRESULT)0x00040ED8L)
//
// MessageId: DB_S_PROPERTIESCHANGED
//
// MessageText:
//
// One or more properties were changed as allowed by provider
//
#define DB_S_PROPERTIESCHANGED ((HRESULT)0x00040ED9L)
//
// MessageId: DB_S_ERRORSOCCURRED
//
// MessageText:
//
// Errors occurred
//
#define DB_S_ERRORSOCCURRED ((HRESULT)0x00040EDAL)
//
// MessageId: DB_S_PARAMUNAVAILABLE
//
// MessageText:
//
// A specified parameter was invalid
//
#define DB_S_PARAMUNAVAILABLE ((HRESULT)0x00040EDBL)
//
// MessageId: DB_S_MULTIPLECHANGES
//
// MessageText:
//
// Updating this row caused more than one row to be updated in the
// data source
//
#define DB_S_MULTIPLECHANGES ((HRESULT)0x00040EDCL)
#endif // _OLEDBERR_H_
#endif // _ALLERROR_H_