windows-nt/Source/XPSP1/NT/admin/cmdline/scripts/pagefile.vbs

3302 lines
160 KiB
Plaintext
Raw Normal View History

2020-09-26 03:20:57 -05:00
'******************************************************************************
'*
'* Copyright (c) Microsoft Corporation. All rights reserved.
'*
'* Module Name: PAGEFILECONFIG.vbs
'*
'* Abstract: Enables an administrator to display and configure
'* a systems paging file Virtual Memory settings.
'*
'*
'******************************************************************************
OPTION EXPLICIT
ON ERROR RESUME NEXT
Err.Clear
'******************************************************************************
' Start of Localization Content
'******************************************************************************
' constants used for format selection
CONST L_PatternFormat_Text = "^(table|list|csv)$"
CONST L_DefaultFormat_Text = "list"
' Valid volume pattern [ a,b drives are invalid ]
CONST L_VolumePatternFormat_Text = "^([c-zC-Z]:|\*)$"
' constants for showresults
CONST L_Na_Text = "N/A"
CONST L_MachineName_Text = "System Name"
CONST L_User_Text = "User"
CONST L_Password_Text = "Password"
CONST L_Intsize_Text = "Initial Size"
CONST L_Maxsize_Text = "Maximum Size"
CONST L_Volume_Text = "Volume Name"
CONST L_Format_Text = "Format"
' the column headers used in the output display
CONST L_ColHeaderHostname_Text = "Host Name"
CONST L_ColHeaderDrive_Text = "Drive/Volume"
CONST L_ColHeaderVolumeLabel_Text = "Volume Label"
CONST L_ColHeaderFileName_Text = "Location\File Name"
CONST L_ColHeaderInitialSize_Text = "Initial Size"
CONST L_ColHeaderMaximumSize_Text = "Maximum Size"
CONST L_ColHeaderCurrentSize_Text = "Current Size"
CONST L_ColHeaderFreeSpace_Text = "Total Free Space"
CONST L_ColHeaderTotalMinimumSize_Text = "Total (All Drives): Minimum Size"
CONST L_ColHeaderTotalRecommendedSize_Text = "Total (All Drives): Recommended Size"
CONST L_ColHeaderTotalSize_Text = "Total (All Drives): Currently Allocated"
' user reply for the warning messages
CONST L_UserReplyYes_Text = "y"
CONST L_UserReplyNo_Text = "n"
' constants for CScript usage
CONST L_UseCscript1_ErrorMessage = "This script should be executed from the Command Prompt using CSCRIPT.EXE."
CONST L_UseCscript2_ErrorMessage = "For example: CSCRIPT PAGEFILECONFIG.vbs <arguments>"
CONST L_UseCscript3_ErrorMessage = "To set CScript as the default application to run .vbs files run the following"
CONST L_UseCscript4_ErrorMessage = " CSCRIPT //H:CSCRIPT //S"
CONST L_UseCscript5_ErrorMessage = "You can then run ""PAGEFILECONFIG.vbs <arguments>"" without preceding the script with CSCRIPT."
' common constants for showing help for all the options
CONST L_UsageDescription_Text = "Description:"
CONST L_UsageParamList_Text = "Parameter List:"
CONST L_UsageExamples_Text = "Examples:"
CONST L_UsageMachineName_Text = " /S system Specifies the remote system to connect to."
CONST L_UsageUserNameLine1_Text = " /U [domain\]user Specifies the user context under which"
CONST L_UsageUserNameLine2_Text = " the command should execute."
CONST L_UsagePasswordLine1_Text = " /P password Specifies the password for the given"
CONST L_UsagePasswordLine2_Text = " user context."
' constants for showing help
CONST L_ShowUsageLine02_Text = "PAGEFILECONFIG.vbs /parameter [arguments]"
CONST L_ShowUsageLine05_Text = " Enables an administrator to display and configure a system's "
CONST L_ShowUsageLine06_Text = " paging file Virtual Memory settings."
CONST L_ShowUsageLine08_Text = "Parameter List:"
CONST L_ShowUsageLine09_Text = " /Change Changes a system's existing paging file"
CONST L_ShowUsageLine10_Text = " Virtual Memory settings."
CONST L_ShowUsageLine12_Text = " /Create Creates/Adds an additional ""Paging File"" to a system."
CONST L_ShowUsageLine14_Text = " /Delete Deletes a ""Paging File"" from a system."
CONST L_ShowUsageLine16_Text = " /Query Displays a system's paging file"
CONST L_ShowUsageLine17_Text = " Virtual Memory settings."
CONST L_ShowUsageLine19_Text = "Examples:"
CONST L_ShowUsageLine20_Text = " PAGEFILECONFIG.vbs"
CONST L_ShowUsageLine21_Text = " PAGEFILECONFIG.vbs /?"
CONST L_ShowUsageLine22_Text = " PAGEFILECONFIG.vbs /Change /?"
CONST L_ShowUsageLine23_Text = " PAGEFILECONFIG.vbs /Create /?"
CONST L_ShowUsageLine24_Text = " PAGEFILECONFIG.vbs /Delete /?"
CONST L_ShowUsageLine25_Text = " PAGEFILECONFIG.vbs /Query /?"
' constants for showing help for /Change option
CONST L_ShowChangeUsageLine02_Text = "PAGEFILECONFIG.vbs /Change [/S system [/U username [/P password]]]"
CONST L_ShowChangeUsageLine03_Text = " { [/I initialsize] [/M maximumsize] }"
CONST L_ShowChangeUsageLine04_Text = " /VO volume1 [/VO volume2 [... [/VO volumeN]]]"
CONST L_ShowChangeUsageLine07_Text = " Changes an existing paging file's Virtual Memory Settings."
CONST L_ShowChangeUsageLine18_Text = " /I initialsize Specifies the new initial size (in MB)"
CONST L_ShowChangeUsageLine19_Text = " to use for the page file specified."
CONST L_ShowChangeUsageLine21_Text = " /M maximumsize Specifies the new maximum size (in MB)"
CONST L_ShowChangeUsageLine22_Text = " to use for the page file specified."
CONST L_ShowChangeUsageLine24_Text = " /VO volumeletter Specifies the local drive who's page"
CONST L_ShowChangeUsageLine25_Text = " file settings need to be changed. Specify"
CONST L_ShowChangeUsageLine26_Text = " '*' to select all the local drives."
CONST L_ShowChangeUsageLine27_Text = " Example: ""C:"" or ""*"""
CONST L_ShowChangeUsageLine30_Text = " PAGEFILECONFIG.vbs /Change /?"
CONST L_ShowChangeUsageLine31_Text = " PAGEFILECONFIG.vbs /Change /M 400 /VO c:"
CONST L_ShowChangeUsageLine32_Text = " PAGEFILECONFIG.vbs /Change /S system /U user /M 400 /VO c:"
CONST L_ShowChangeUsageLine33_Text = " PAGEFILECONFIG.vbs /Change /S system /U user /I 20 /VO *"
CONST L_ShowChangeUsageLine34_Text = " PAGEFILECONFIG.vbs /Change /S system /U user /P password /I 200"
CONST L_ShowChangeUsageLine35_Text = " /M 500 /VO c: /VO d:"
' constants for showing help for /Create option
CONST L_ShowCreateUsageLine02_Text = "PAGEFILECONFIG.vbs /Create [/S system [/U username [/P password]]]"
CONST L_ShowCreateUsageLine03_Text = " /I initialsize /M maximumsize"
CONST L_ShowCreateUsageLine04_Text = " /VO volume1 [/VO volume2 [... [/VO volumeN]]]"
CONST L_ShowCreateUsageLine07_Text = " Creates/Adds an additional ""Paging File"" to a system."
CONST L_ShowCreateUsageLine18_Text = " /I initialsize Specifies the initial size (in MB) to use"
CONST L_ShowCreateUsageLine19_Text = " for the page file being created."
CONST L_ShowCreateUsageLine21_Text = " /M maximumsize Specifies the maximum size (in MB) to use"
CONST L_ShowCreateUsageLine22_Text = " for the page file being created."
CONST L_ShowCreateUsageLine24_Text = " /VO volumeletter Specifies the local drive on which the"
CONST L_ShowCreateUsageLine25_Text = " page file has to be created. Specify '*'"
CONST L_ShowCreateUsageLine26_Text = " to select all the local drives."
CONST L_ShowCreateUsageLine27_Text = " Example: ""C:"" or ""*"""
CONST L_ShowCreateUsageLine30_Text = " PAGEFILECONFIG.vbs /Create /?"
CONST L_ShowCreateUsageLine31_Text = " PAGEFILECONFIG.vbs /Create /I 140 /M 300 /VO d:"
CONST L_ShowCreateUsageLine32_Text = " PAGEFILECONFIG.vbs /Create /S system /U user /I 150 /M 300 /VO d:"
CONST L_ShowCreateUsageLine33_Text = " PAGEFILECONFIG.vbs /Create /S system /U user /I 50 /M 200 /VO *"
CONST L_ShowCreateUsageLine34_Text = " PAGEFILECONFIG.vbs /Create /S system /U user /P password /I 100"
CONST L_ShowCreateUsageLine35_Text = " /M 600 /VO d: /VO e: /VO f:"
' constants for showing help for /Delete option
CONST L_ShowDeleteUsageLine02_Text = "PAGEFILECONFIG.vbs /Delete [/S system [/U username [/P password]]]"
CONST L_ShowDeleteUsageLine03_Text = " /VO volume1 [/VO volume2 [... [/VO volumeN]]]"
CONST L_ShowDeleteUsageLine06_Text = " Deletes paging file(s) from a system."
CONST L_ShowDeleteUsageLine17_Text = " /VO volumeletter Specifies the local drive who's page"
CONST L_ShowDeleteUsageLine18_Text = " file has to be deleted."
CONST L_ShowDeleteUsageLine19_Text = " Example: ""C:"""
CONST L_ShowDeleteUsageLine22_Text = " PAGEFILECONFIG.vbs /Delete /?"
CONST L_ShowDeleteUsageLine23_Text = " PAGEFILECONFIG.vbs /Delete /VO d:"
CONST L_ShowDeleteUsageLine24_Text = " PAGEFILECONFIG.vbs /Delete /S system /U user /VO d: /VO e:"
CONST L_ShowDeleteUsageLine25_Text = " PAGEFILECONFIG.vbs /Delete /S system /U user /P password /VO d:"
' constants for showing help for /Query option
CONST L_ShowQueryUsageLine02_Text = "PAGEFILECONFIG.vbs /Query [/S system [/U username [/P password]]]"
CONST L_ShowQueryUsageLine03_Text = " [/FO format]"
CONST L_ShowQueryUsageLine06_Text = " Displays a system's paging file Virtual Memory settings."
CONST L_ShowQueryUsageLine17_Text = " /FO format Specifies the format in which the output"
CONST L_ShowQueryUsageLine18_Text = " is to be displayed."
CONST L_ShowQueryUsageLine19_Text = " Valid values: ""TABLE"", ""LIST"", ""CSV""."
CONST L_ShowQueryUsageLine22_Text = " PAGEFILECONFIG.vbs"
CONST L_ShowQueryUsageLine23_Text = " PAGEFILECONFIG.vbs /Query"
CONST L_ShowQueryUsageLine24_Text = " PAGEFILECONFIG.vbs /Query /?"
CONST L_ShowQueryUsageLine25_Text = " PAGEFILECONFIG.vbs /Query /FO table"
CONST L_ShowQueryUsageLine26_Text = " PAGEFILECONFIG.vbs /Query /S system /U user"
CONST L_ShowQueryUsageLine27_Text = " PAGEFILECONFIG.vbs /Query /S system /U user /P password /FO LIST"
' constants for error messages
CONST L_UnableToInclude_ErrorMessage = "ERROR: Unable to include the common module ""CmdLib.Wsc""."
CONST L_InvalidHelpUsage_ErrorMessage = "ERROR: Invalid Help Usage. Use only /? for help."
CONST L_InvalidParameter_ErrorMessage = "ERROR: Invalid Argument/Option - '%1'."
CONST L_InvalidInput_ErrorMessage = "ERROR: Invalid Input. Please Check the input values."
CONST L_InvalidCredentials_ErrorMessage = "ERROR: Invalid credentials. Verify the machine, user and password given."
CONST L_InvalidVolumeName_ErrorMessage = "ERROR: Invalid volume '%1' specified."
CONST L_InvalidUserReply_ErrorMessage = "ERROR: Invalid Choice. Enter a valid choice."
CONST L_FailCreateObject_ErrorMessage = "ERROR: Unable to create object."
CONST L_UnableToRetrieveInfo_ErrorMessage = "ERROR: Unable to retrieve information."
CONST L_CannotCreate_ErrorMessage = "ERROR: Page File for the specified volume cannot be created."
CONST L_InvalidPhysicalDrive_ErrorMessage = "ERROR: Volume '%1' is not a valid physical drive."
CONST L_UpdateFailed_ErrorMessage = "ERROR: Pagefile updation failed."
CONST L_InvalidInitSizeValue_ErrorMessage = "ERROR: Enter a numeric value for the initial page file size."
CONST L_InvalidMaxSizeValue_ErrorMessage = "ERROR: Enter a numeric value for the maximum page file size."
' constant for hint message to show remote connectivity failure
CONST L_HintCheckConnection_Message = "ERROR: Please check the system name, credentials and WBEM Core."
' constants for info. messages
CONST L_PageFileDoesNotExist_ErrorMessage = "INFO: No pagefile exists on volume '%1'"
CONST L_NoPageFiles_Message = "INFO: No Page File(s) Available."
' constants for Syntax Error Messages
CONST L_InvalidSyntax_ErrorMessage = "ERROR: Invalid Syntax."
CONST L_InvalidServerName_ErrorMessage = "ERROR: Invalid Syntax. System name cannot be empty."
CONST L_InvalidUserName_ErrorMessage = "ERROR: Invalid Syntax. User name cannot be empty."
CONST L_TypeUsage_Message = "Type ""%1 /?"" for usage."
CONST L_TypeCreateUsage_Message = "Type ""%1 /Create /?"" for usage."
CONST L_TypeChangeUsage_Message = "Type ""%1 /Change /?"" for usage."
CONST L_TypeDeleteUsage_Message = "Type ""%1 /Delete /?"" for usage."
CONST L_TypeQueryUsage_Message = "Type ""%1 /Query /?"" for usage."
' constants for missing mandatory option messages
CONST L_VolumeNameNotSpecified_ErrorMessage = "Mandatory option '/VO' is missing."
CONST L_InitialSizeNotSpecified_ErrorMessage = "Mandatory option '/I' is missing."
CONST L_MaximumSizeNotSpecified_ErrorMessage = "Mandatory option '/M' is missing."
CONST L_NoneoftheSizeSpecified_ErrorMessage = "Mandatory options '/I', '/M' are missing."
CONST L_FormatNotSpecified_ErrorMessage = "Mandatory options '/FO' is missing."
' error messages for invalid usage of s,u,p switches
CONST L_InvalidServerCredentials_ErrorMessage = "ERROR: Invalid Syntax. /U can be specified only when /S is specified."
CONST L_InvalidUserCredentials_ErrorMessage = "ERROR: Invalid Syntax. /P can be specified only when /U is specified."
' constants for Mutliple line Error Messages
CONST L_InsufficientMaxSize1_ErrorMessage = "ERROR: The maximum page file size on volume '%1' should be greater than or "
CONST L_InsufficientMaxSize2_ErrorMessage = " equal to the initial page file size, and less than %2 MB or less "
CONST L_InsufficientMaxSize3_ErrorMessage = " than the disk size."
CONST L_InitialSizeRange1_ErrorMessage = "ERROR: The initial paging file size must be between 2 MB and %1 MB, and "
CONST L_InitialSizeRange2_ErrorMessage = " cannot exceed the amount of free space on the drive you have selected. "
CONST L_NotEnoughSpace1_ErrorMessage = "ERROR: There is not enough space on this drive for the paging file specified."
CONST L_NotEnoughSpace2_ErrorMessage = " Please enter a smaller number or free some disk space."
CONST L_AtLeastFiveMB1_ErrorMessage = "ERROR: There is not enough space on this drive to create the page file size "
CONST L_AtLeastFiveMB2_ErrorMessage = " specified. At least 5 megabytes of free disk space must be left after"
CONST L_AtLeastFiveMB3_ErrorMessage = " the page file is created. Specify a smaller page file size or free some "
CONST L_AtLeastFiveMB4_ErrorMessage = " disk space."
CONST L_DiskTooSmall1_ErrorMessage = "ERROR: Drive '%1' is too small for the maximum paging file size specified."
CONST L_DiskTooSmall2_ErrorMessage = " Please enter a smaller number."
' constants for Mutliple line Warning Messages
CONST L_GrowsToFreeSpaceWarning1_Message = "WARNING: Drive '%1' does not have enough free space for the maximum paging "
CONST L_GrowsToFreeSpaceWarning2_Message = " file specified. If you continue with this setting, the paging file "
CONST L_GrowsToFreeSpaceWarning3_Message = " will only grow to the size of the available free space (%2 MB)."
CONST L_CrashDumpSettingWarning1_Message = "WARNING: If the pagefile on volume '%1' has an initial size of less than"
CONST L_CrashDumpSettingWarning2_Message = " %2, then the system may not be able to create debugging"
CONST L_CrashDumpSettingWarning3_Message = " information file if a STOP error occurs."
' constants for Multiple line SUCCESS / SKIPPING messages
CONST L_ChangeIntSuccess1_Message = "SUCCESS: The initial size for the paging file on '%1' was changed from "
CONST L_ChangeIntSuccess2_Message = " %2 MB to %3 MB."
CONST L_ChangeMaxSuccess1_Message = "SUCCESS: The maximum size for the paging file on '%1' was changed from "
CONST L_ChangeMaxSuccess2_Message = " %2 MB to %3 MB."
CONST L_ChangeIntSkipping1_Message = "SKIPPING: The initial size specified for the paging file on '%1' is same as "
CONST L_ChangeIntSkipping2_Message = " the present value."
CONST L_ChangeMaxSkipping1_Message = "SKIPPING: The maximum size specified for the paging file on '%1' is same as "
CONST L_ChangeMaxSkipping2_Message = " the present value."
CONST L_CreateSuccess1_Message = "SUCCESS: A paging file with initial size of %1 MB and a maximum size "
CONST L_CreateSuccess2_Message = " of %2 MB was created on the volume: '%3'"
CONST L_CreateSkipping_Message = "SKIPPING: A paging file already exists on the volume: '%1'"
CONST L_DeleteSuccess_Message = "SUCCESS: The paging file from volume '%1' has successfully been removed."
' constant for other error messages
CONST L_InvalidFormat_ErrorMessage = "Invalid format '%1' specified."
CONST L_SystemManagedSize_ErrorMessage = "Access Denied: System managed size on volume '%1'"
CONST L_PromptForContinueAnyWay_Message = "Continue Anyway [y/n]?"
CONST L_NotAllowedMoreThanOnce_ErrorMessage = "'%1' option is not allowed more than '1' time(s)."
CONST L_RestartComputer_Message = "Restart the computer for these changes to effect."
'******************************************************************************
' END of Localization Content
'******************************************************************************
' the main options
CONST OPTION_HELP = "?"
CONST OPTION_CHANGE = "change"
CONST OPTION_CREATE = "create"
CONST OPTION_DELETE = "delete"
CONST OPTION_QUERY = "query"
' the suboptions
CONST SUB_OPTION_SERVER = "s"
CONST SUB_OPTION_USER = "u"
CONST SUB_OPTION_PASSWORD = "p"
CONST SUB_OPTION_INTSIZE = "i"
CONST SUB_OPTION_MAXSIZE = "m"
CONST SUB_OPTION_VOLUME = "vo"
CONST SUB_OPTION_FORMAT = "fo"
' constant for CScript
CONST CONST_CSCRIPT = 2
' constants for error codes
CONST CONST_ERROR = 0
' constants for options
CONST CONST_SHOW_USAGE = 3
CONST CONST_CHANGE_OPTION = 11
CONST CONST_CREATE_OPTION = 21
CONST CONST_DELETE_OPTION = 31
CONST CONST_QUERY_OPTION = 41
' constant for matched pattern
CONST CONST_NO_MATCHES_FOUND = 0
' utility specific constants
CONST INITIAL_SIZE_LB = 2
CONST DRIVE_TYPE = 3
CONST MEGA_BYTES = " MB"
CONST SIZE_FACTOR = 1.5
CONST CONVERSION_FACTOR = 1048576
CONST PAGEFILE_DOT_SYS = "\pagefile.sys"
' constant for the UNC format server name
CONST UNC_FORMAT_SERVERNAME_PREFIX = "\\"
' constants for exit values
CONST EXIT_SUCCESS = 0
CONST EXIT_UNEXPECTED = 255
CONST EXIT_INVALID_INPUT = 254
CONST EXIT_METHOD_FAIL = 250
CONST EXIT_QUERY_FAIL = 253
CONST EXIT_INVALID_PARAM = 999
' Define namespace and class names of wmi
CONST CONST_WBEM_FLAG = 131072
CONST CONST_NAMESPACE_CIMV2 = "root\cimv2"
CONST CLASS_PAGE_FILE_SETTING = "Win32_PageFileSetting"
CONST CLASS_LOGICAL_DISK = "Win32_LogicalDisk"
CONST CLASS_COMPUTER_SYSTEM = "Win32_ComputerSystem"
CONST CLASS_PAGE_FILE_USAGE = "Win32_PageFileUsage"
CONST CLASS_OPERATING_SYSTEM = "Win32_OperatingSystem"
CONST CLASS_PERFDISK_PHYSICAL_DISK = "Win32_PerfRawData_PerfDisk_PhysicalDisk"
' constants for data lengths for ShowResults (15,13,13,19,20,20,20,22)
CONST CONST_HOSTNAME_LENGTH = 15
CONST CONST_DRIVENAME_LENGTH = 13
CONST CONST_VOLLABEL_LENGTH = 13
CONST CONST_PAGEFILENAME_LENGTH = 19
CONST CONST_INTSIZE_LENGTH = 20
CONST CONST_MAXSIZE_LENGTH = 20
CONST CONST_CURRENTSIZE_LENGTH = 20
CONST CONST_FREESPACE_LENGTH = 22
' constants for data lengths for ShowResults (15,33,37,40)
CONST CONST_TOTALMINSIZE_LENGTH = 33
CONST CONST_TOTALRECSIZE_LENGTH = 37
CONST CONST_TOTALSIZE_LENGTH = 40
Dim UseCscriptErrorMessage ' string to store the CScript usage
Dim blnLocalConnection ' flag for local connection
Dim component ' object for the common module
' Error Messages
Dim InsufficientMaxSizeErrorMessage
Dim InitialSizeRangeErrorMessage
Dim NotEnoughSpaceErrorMessage
Dim AtLeastFiveMBErrorMessage
Dim DiskTooSmallErrorMessage
' Warning Messages
Dim GrowsToFreeSpaceWarningMessage
Dim CrashDumpSettingWarningMessage
' Success / Skipping messages
Dim ChangeIntSuccessMessage
Dim ChangeMaxSuccessMessage
Dim ChangeIntSkippingMessage
Dim ChangeMaxSkippingMessage
Dim CreateSuccessMessage
UseCscriptErrorMessage = L_UseCscript1_ErrorMessage & vbCRLF & _
L_UseCscript2_ErrorMessage & vbCRLF & vbCRLF & _
L_UseCscript3_ErrorMessage & vbCRLF & _
L_UseCscript4_ErrorMessage & vbCRLF & vbCRLF & _
L_UseCscript5_ErrorMessage
InsufficientMaxSizeErrorMessage = L_InsufficientMaxSize1_ErrorMessage & vbCRLF & _
L_InsufficientMaxSize2_ErrorMessage & vbCRLF & _
L_InsufficientMaxSize3_ErrorMessage
InitialSizeRangeErrorMessage = L_InitialSizeRange1_ErrorMessage & vbCRLF & _
L_InitialSizeRange2_ErrorMessage
NotEnoughSpaceErrorMessage = L_NotEnoughSpace1_ErrorMessage & vbCRLF & _
L_NotEnoughSpace2_ErrorMessage
AtLeastFiveMBErrorMessage = L_AtLeastFiveMB1_ErrorMessage & vbCRLF & _
L_AtLeastFiveMB2_ErrorMessage & vbCRLF & _
L_AtLeastFiveMB3_ErrorMessage & vbCRLF & _
L_AtLeastFiveMB4_ErrorMessage
DiskTooSmallErrorMessage = L_DiskTooSmall1_ErrorMessage & vbCRLF & _
L_DiskTooSmall2_ErrorMessage
GrowsToFreeSpaceWarningMessage = L_GrowsToFreeSpaceWarning1_Message & vbCRLF & _
L_GrowsToFreeSpaceWarning2_Message & vbCRLF & _
L_GrowsToFreeSpaceWarning3_Message
CrashDumpSettingWarningMessage = L_CrashDumpSettingWarning1_Message & vbCRLF & _
L_CrashDumpSettingWarning2_Message & vbCRLF & _
L_CrashDumpSettingWarning3_Message
ChangeIntSuccessMessage = L_ChangeIntSuccess1_Message & vbCRLF & _
L_ChangeIntSuccess2_Message
ChangeMaxSuccessMessage = L_ChangeMaxSuccess1_Message & vbCRLF & _
L_ChangeMaxSuccess2_Message
ChangeIntSkippingMessage = L_ChangeIntSkipping1_Message & vbCRLF & _
L_ChangeIntSkipping2_Message
ChangeMaxSkippingMessage = L_ChangeMaxSkipping1_Message & vbCRLF & _
L_ChangeMaxSkipping2_Message
CreateSuccessMessage = L_CreateSuccess1_Message & vbCRLF & _
L_CreateSuccess2_Message
blnLocalConnection = FALSE
' create the object for commom module
Set component = CreateObject( "Microsoft.CmdLib" )
' check if the commom module(CmdLib.wsc) is not registered
If Err.Number Then
Err.Clear
WScript.Echo(L_UnableToInclude_ErrorMessage)
WScript.Quit(EXIT_METHOD_FAIL)
End If
' set the scripting host to WScript
Set component.ScriptingHost = WScript.Application
' Check whether the script is run using CScript
If CInt(component.checkScript) <> CONST_CSCRIPT Then
WScript.Echo (UseCscriptErrorMessage)
WScript.Quit(EXIT_UNEXPECTED)
End If
' call the main function
Call VBMain()
' quit with exit value = 0
WScript.Quit(EXIT_SUCCESS)
'******************************************************************************
'* Sub: VBMain
'*
'* Purpose: This is main function to starts execution
'*
'* Input: None
'*
'* Output: None
'*
'******************************************************************************
Sub VBMain()
ON ERROR RESUME NEXT
Err.Clear
' Declaring main variables
Dim strMachine ' machine to configure page files on
Dim strUserName ' user name to connect to the machine
Dim strPassword ' password for the user
Dim intIntSize ' initial size for the page file
Dim intMaxSize ' maximum size for the page file
Dim strVolName ' volume name
Dim objVols ' object containing volume names
Dim strFormat ' query display format
Dim intMainOption ' main option specified
Dim intTempResult ' temporary variable to hold the return value
Dim blnValidArguments ' stores the return value of ValidateArguments
' Initializing Variables
intTempResult = CONST_ERROR ' default is CONST_ERROR (=0)
strFormat = L_DefaultFormat_Text ' default format is LIST
Set objVols = CreateObject("Scripting.Dictionary")
objVols.CompareMode = VBBinaryCompare
If Err.Number Then
' Unable to create the dictionary object.
Err.Clear
WScript.Echo(L_FailCreateObject_ErrorMessage)
WScript.Quit(EXIT_METHOD_FAIL)
End If
intTempResult = intParseCmdLine( strMachine, _
strUserName, _
strPassword, _
intIntSize, _
intMaxSize, _
strVolName, _
objVols, _
strFormat, _
intMainOption )
' Select the operation specified by the user
Select Case intTempResult
Case CONST_SHOW_USAGE
Select Case intMainOption
Case CONST_CHANGE_OPTION
Call ShowChangeUsage()
Case CONST_CREATE_OPTION
Call ShowCreateUsage()
Case CONST_DELETE_OPTION
Call ShowDeleteUsage()
Case CONST_QUERY_OPTION
Call ShowQueryUsage()
Case Else
Call ShowUsage()
End Select
Case CONST_CHANGE_OPTION
blnValidArguments = ValidateArguments (strMachine, strUserName, strPassword, _
intIntSize, intMaxSize, objVols, strFormat, _
intMainOption)
' If all arguments valid, proceed
If blnValidArguments Then
Call ProcessChange(strMachine, strUserName, strPassword, _
intIntSize, intMaxSize, objVols)
End If
Case CONST_CREATE_OPTION
blnValidArguments = ValidateArguments (strMachine, strUserName, strPassword, _
intIntSize, intMaxSize, objVols, strFormat, _
intMainOption)
' If all arguments valid, proceed
If blnValidArguments Then
Call ProcessCreate(strMachine, strUserName, strPassword, _
intIntSize, intMaxSize, objVols)
End If
Case CONST_DELETE_OPTION
blnValidArguments = ValidateArguments (strMachine, strUserName, strPassword, _
intIntSize, intMaxSize, objVols, strFormat, _
intMainOption)
' If all arguments valid, proceed
If blnValidArguments Then
Call ProcessDelete(strMachine, strUserName, strPassword, objVols)
' Here wild cards cannot be specified
End If
Case CONST_QUERY_OPTION
blnValidArguments = ValidateArguments (strMachine, strUserName, strPassword, _
intIntSize, intMaxSize, objVols, strFormat, _
intMainOption)
' If all arguments valid, proceed
If blnValidArguments Then
Call ProcessQuery(strMachine, strUserName, strPassword, strFormat)
End If
Case CONST_ERROR
WSCript.Quit(EXIT_INVALID_INPUT)
End Select
End Sub
'******************************************************************************
'* Function: intParseCmdLine
'*
'* Purpose: Parses the command line arguments to the variables
'*
'* Input:
'* [out] strMachine machine to configure page files on
'* [out] strUserName user name to connect to the machine
'* [out] strPassword password for the user
'* [out] intIntSize initial size for the page file
'* [out] intMaxSize maximum size for the page file
'* [in] strVolName individual volume name(s)
'* [out] objVols object containing volume names
'* [out] strFormat query display format
'* [out] intMainOption main option specified
'*
'* Output: Returns CONST_SHOW_USAGE, CONST_CHANGE_OPTION ,
'* CONST_CREATE_OPTION, CONST_DELETE_OPTION ,
'* CONST_QUERY_OPTION or CONST_ERROR.
'* Displays error message and quits if invalid option is asked
'*
'******************************************************************************
Private Function intParseCmdLine( ByRef strMachine, _
ByRef strUserName, _
ByRef strPassword, _
ByRef intIntSize, _
ByRef intMaxSize, _
ByVal strVolName, _
ByRef objVols, _
ByRef strFormat, _
ByRef intMainOption )
ON ERROR RESUME NEXT
Err.Clear
Dim strUserGivenArg ' to temporarily store the user given arguments
Dim intArgIter ' to count the number of arguments given
Dim intQCount ' to count the number of help options given
Dim intMainOptionNumber ' to count the number of main operations selected (Max allowed = 1)
Dim intVolumes ' to store the number of volumes specified
' Following variables are used to check if a switch if given more than once
Dim blnIntSizeSpecified
Dim blnMaxSizeSpecified
Dim blnFormatSpecified
Dim blnMachineSpecified
Dim blnUserSpecified
Dim blnPasswordSpecified
' Initialization
strUserGivenArg = ""
intMainOptionNumber = 0
intQCount = 0
intArgIter = 0
intParseCmdLine = 0
' initially none of the parameters are specified, so set all flags to FALSE
blnIntSizeSpecified = FALSE
blnMaxSizeSpecified = FALSE
blnFormatSpecified = FALSE
blnMachineSpecified = FALSE
blnUserSpecified = FALSE
blnPasswordSpecified = FALSE
' if no arguments are specified, default option is query
If WScript.Arguments.Count = 0 Then
intParseCmdLine = CONST_QUERY_OPTION
intMainOption = CONST_QUERY_OPTION
End If
' Retrieve the command line parameters and their values
Do While intArgIter <= WScript.Arguments.Count - 1
strUserGivenArg = WScript.Arguments.Item(intArgIter)
' check if the first character is a '-' OR '/' symbol
If Left(strUserGivenArg,1) = "/" OR Left(strUserGivenArg,1) = "-" Then
' ignore the symbol and take the rest as the switch specified
strUserGivenArg = Right(strUserGivenArg,Len(strUserGivenArg) - 1)
Select Case LCase(strUserGivenArg)
Case LCase(OPTION_HELP)
intQCount = intQCount + 1
If (CInt(intQCount) >= 2 OR CInt(WScript.Arguments.Count) > 2) Then
intParseCmdLine = CONST_ERROR
WScript.Echo(L_InvalidHelpUsage_ErrorMessage)
Exit Function
Else
intParseCmdLine = CONST_SHOW_USAGE
intArgIter = intArgIter + 1
End If
Case LCase(OPTION_CHANGE)
If intQCount = 1 Then ' intQCount = 1 means help specified
intParseCmdLine = CONST_SHOW_USAGE
Else
intParseCmdLine = CONST_CHANGE_OPTION
End If
intMainOption = CONST_CHANGE_OPTION
intMainOptionNumber = intMainOptionNumber + 1
intArgIter = intArgIter + 1
Case LCase(OPTION_CREATE)
If intQCount = 1 Then ' intQCount = 1 means help specified
intParseCmdLine = CONST_SHOW_USAGE
Else
intParseCmdLine = CONST_CREATE_OPTION
End If
intMainOption = CONST_CREATE_OPTION
intMainOptionNumber = intMainOptionNumber + 1
intArgIter = intArgIter + 1
Case LCase(OPTION_DELETE)
If intQCount = 1 Then ' intQCount = 1 means help specified
intParseCmdLine = CONST_SHOW_USAGE
Else
intParseCmdLine = CONST_DELETE_OPTION
End If
intMainOption = CONST_DELETE_OPTION
intMainOptionNumber = intMainOptionNumber + 1
intArgIter = intArgIter + 1
Case LCase(OPTION_QUERY)
If intQCount = 1 Then ' intQCount = 1 means help specified
intParseCmdLine = CONST_SHOW_USAGE
Else
intParseCmdLine = CONST_QUERY_OPTION
End If
intMainOption = CONST_QUERY_OPTION
intMainOptionNumber = intMainOptionNumber + 1
intArgIter = intArgIter + 1
Case LCase(SUB_OPTION_SERVER)
' Check if server name is given with help usage
If intParseCmdLine = CONST_SHOW_USAGE Then
WScript.Echo(L_InvalidHelpUsage_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
' Check if Machine Name is already specified
If NOT blnMachineSpecified Then
blnMachineSpecified = TRUE ' Set Specified Flag to TRUE
If NOT component.getArguments(L_MachineName_Text,strMachine,intArgIter,FALSE) Then
component.VBPrintf L_InvalidSyntax_ErrorMessage
Call typeMessage(intMainOption)
intParseCmdLine = CONST_ERROR
Exit Function
End If
intArgIter = intArgIter + 1
Else
component.VBPrintf L_InvalidSyntax_ErrorMessage & " " & _
L_NotAllowedMoreThanOnce_ErrorMessage , _
Array(WScript.Arguments.Item(intArgIter))
' print the appropriate help usage message
Call typeMessage(intMainOption)
WScript.Quit(EXIT_INVALID_INPUT)
End If
Case LCase(SUB_OPTION_USER)
' Check if user name is given with help usage
If intParseCmdLine = CONST_SHOW_USAGE Then
WScript.Echo(L_InvalidHelpUsage_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
' Check if User Name is already specified
If NOT blnUserSpecified Then
blnUserSpecified = TRUE ' Set Specified Flag to TRUE
If NOT component.getArguments(L_User_Text,strUserName,intArgIter,FALSE) Then
component.VBPrintf L_InvalidSyntax_ErrorMessage
Call typeMessage(intMainOption)
intParseCmdLine = CONST_ERROR
Exit Function
End If
intArgIter = intArgIter + 1
Else
component.VBPrintf L_InvalidSyntax_ErrorMessage & " " & _
L_NotAllowedMoreThanOnce_ErrorMessage , _
Array(WScript.Arguments.Item(intArgIter))
' print the appropriate help usage message
Call typeMessage(intMainOption)
WScript.Quit(EXIT_INVALID_INPUT)
End If
Case LCase(SUB_OPTION_PASSWORD)
' Check if password is given with help usage
If intParseCmdLine = CONST_SHOW_USAGE Then
WScript.Echo(L_InvalidHelpUsage_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
' Check if Password is already specified
If NOT blnPasswordSpecified Then
blnPasswordSpecified = TRUE ' Set Specified Flag to TRUE
If NOT component.getArguments(L_Password_Text,strPassword,intArgIter,FALSE) Then
component.VBPrintf L_InvalidSyntax_ErrorMessage
Call typeMessage(intMainOption)
intParseCmdLine = CONST_ERROR
Exit Function
End If
intArgIter = intArgIter + 1
Else
component.VBPrintf L_InvalidSyntax_ErrorMessage & " " & _
L_NotAllowedMoreThanOnce_ErrorMessage , _
Array(WScript.Arguments.Item(intArgIter))
' print the appropriate help usage message
Call typeMessage(intMainOption)
WScript.Quit(EXIT_INVALID_INPUT)
End If
Case LCase(SUB_OPTION_INTSIZE)
' Check if initsize is given with help usage
If intParseCmdLine = CONST_SHOW_USAGE Then
WScript.Echo(L_InvalidHelpUsage_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
' Check if initsize is already specified
If NOT blnIntSizeSpecified Then
blnIntSizeSpecified = TRUE ' Set Specified Flag to TRUE
If NOT component.getArguments(L_Intsize_Text,intIntSize,intArgIter,FALSE) Then
component.VBPrintf L_InvalidSyntax_ErrorMessage
Call typeMessage(intMainOption)
intParseCmdLine = CONST_ERROR
Exit Function
End If
intArgIter = intArgIter + 1
Else
component.VBPrintf L_InvalidSyntax_ErrorMessage & " " & _
L_NotAllowedMoreThanOnce_ErrorMessage , _
Array(WScript.Arguments.Item(intArgIter))
' print the appropriate help usage message
Call typeMessage(intMainOption)
WScript.Quit(EXIT_INVALID_INPUT)
End If
Case LCase(SUB_OPTION_MAXSIZE)
' Check if maxsize is given with help usage
If intParseCmdLine = CONST_SHOW_USAGE Then
WScript.Echo(L_InvalidHelpUsage_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
' Check if Maxsize is already specified
If NOT blnMaxSizeSpecified Then
blnMaxSizeSpecified = TRUE ' Set Specified Flag to TRUE
If NOT component.getArguments(L_Maxsize_Text,intMaxSize,intArgIter,FALSE) Then
component.VBPrintf L_InvalidSyntax_ErrorMessage
Call typeMessage(intMainOption)
intParseCmdLine = CONST_ERROR
Exit Function
End If
intArgIter = intArgIter + 1
Else
component.VBPrintf L_InvalidSyntax_ErrorMessage & " " & _
L_NotAllowedMoreThanOnce_ErrorMessage , _
Array(WScript.Arguments.Item(intArgIter))
' print the appropriate help usage message
Call typeMessage(intMainOption)
WScript.Quit(EXIT_INVALID_INPUT)
End If
Case LCase(SUB_OPTION_FORMAT)
' Check if maxsize is given with help usage
If intParseCmdLine = CONST_SHOW_USAGE Then
WScript.Echo(L_InvalidHelpUsage_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
' Check if format is already specified
If NOT blnFormatSpecified Then
blnFormatSpecified = TRUE ' Set Specified Flag to TRUE
If NOT component.getArguments(L_Format_Text,strFormat,intArgIter,FALSE) Then
component.VBPrintf L_InvalidSyntax_ErrorMessage
Call typeMessage(intMainOption)
intParseCmdLine = CONST_ERROR
Exit Function
End If
intArgIter = intArgIter + 1
Else
component.VBPrintf L_InvalidSyntax_ErrorMessage & " " & _
L_NotAllowedMoreThanOnce_ErrorMessage , _
Array(WScript.Arguments.Item(intArgIter))
' print the appropriate help usage message
Call typeMessage(intMainOption)
WScript.Quit(EXIT_INVALID_INPUT)
End If
Case LCase(SUB_OPTION_VOLUME)
' Check if volume is given with help usage
If intParseCmdLine = CONST_SHOW_USAGE Then
WScript.Echo(L_InvalidHelpUsage_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
If NOT component.getArguments(L_Volume_Text,strVolName,intArgIter,FALSE) Then
component.VBPrintf L_InvalidSyntax_ErrorMessage
Call typeMessage(intMainOption)
intParseCmdLine = CONST_ERROR
Exit Function
Else
If strVolName = "*" Then
objVols.Add LCase(strVolName), -1
Else
If NOT objVols.Exists(LCase(strVolName)) Then
objVols.Add LCase(strVolName), -1
End If
intVolumes = objVols.Count
End If
End If
intArgIter = intArgIter + 1
Case Else
' display the invalid param err msg first
component.VBPrintf L_InvalidParameter_ErrorMessage, _
Array(WScript.arguments.Item(intArgIter))
' then display the 'type ..usage' message
Select Case CInt(intMainOption)
Case CONST_CHANGE_OPTION
component.VBPrintf L_TypeChangeUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_PARAM)
Case CONST_CREATE_OPTION
component.VBPrintf L_TypeCreateUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_PARAM)
Case CONST_DELETE_OPTION
component.VBPrintf L_TypeDeleteUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_PARAM)
Case CONST_QUERY_OPTION
component.VBPrintf L_TypeQueryUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_PARAM)
Case Else
component.VBPrintf L_TypeUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_PARAM)
End Select
End Select
Else
' invalid argument specified
' display the invalid param err msg first
component.VBPrintf L_InvalidParameter_ErrorMessage, _
Array(WScript.arguments.Item(intArgIter))
' then display the 'type ..usage' message
Select Case CInt(intMainOption)
Case CONST_CHANGE_OPTION
component.VBPrintf L_TypeChangeUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_PARAM)
Case CONST_CREATE_OPTION
component.VBPrintf L_TypeCreateUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_PARAM)
Case CONST_DELETE_OPTION
component.VBPrintf L_TypeDeleteUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_PARAM)
Case CONST_QUERY_OPTION
component.VBPrintf L_TypeQueryUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_PARAM)
Case Else
component.VBPrintf L_TypeUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_PARAM)
End Select
End If
Loop
' check if the there is any volume(s) specified.
If objVols.Count = 0 Then
intVolumes = objVols.Count
End If
' Check if volumes | * is specified along with help
If (intVolumes > 0 AND intQCount = 1) Then
WScript.Echo(L_InvalidHelpUsage_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
' Check if two major operations are selected at a time
If ( intMainOptionNumber > 1 ) Then
WScript.Echo(L_InvalidSyntax_ErrorMessage)
component.VBPrintf L_TypeUsage_Message,Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
ElseIf (intQcount = 0 AND intmainoption = 0) Then
intMainOption = CONST_QUERY_OPTION
End If
' check if NO major option(s) is specified, but other switches are specified
If ( intMainOptionNumber = 0 ) Then
If blnIntSizeSpecified OR _
blnMaxSizeSpecified OR _
blnFormatSpecified OR _
blnMachineSpecified OR _
blnUserSpecified OR _
blnPasswordSpecified OR _
intVolumes > 0 Then
WScript.Echo(L_InvalidSyntax_ErrorMessage)
component.VBPrintf L_TypeUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
End If
End If
' check if format is specified with create option
If (intMainOption = CONST_CREATE_OPTION) Then
If blnFormatSpecified Then
WScript.Echo(L_InvalidSyntax_ErrorMessage)
component.VBPrintf L_TypeCreateUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
End If
End If
' check if format is specified with change option
If (intMainOption = CONST_CHANGE_OPTION) Then
If blnFormatSpecified Then
WScript.Echo(L_InvalidSyntax_ErrorMessage)
component.VBPrintf L_TypeChangeUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
End If
End If
' check if /Initsize, /Maxsize, /FO are specified
If (intMainOption = CONST_DELETE_OPTION) Then
If (blnIntSizeSpecified OR blnMaxSizeSpecified OR blnFormatSpecified) Then
WScript.Echo(L_InvalidSyntax_ErrorMessage)
component.VBPrintf L_TypeDeleteUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
End If
End If
' check if /Initsize, /Maxsize, are specified
If (intMainOption = CONST_QUERY_OPTION) Then
If (blnIntSizeSpecified OR blnMaxSizeSpecified) Then
WScript.Echo(L_InvalidSyntax_ErrorMessage)
component.VBPrintf L_TypeQueryUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
End If
End If
End Function
'******************************************************************************
'* Function: ValidateArguments
'*
'* Purpose: Validates the command line arguments given by the user
'*
'* Input:
'* [out] strMachine machine to configure page files on
'* [out] strUserName user name to connect to the machine
'* [out] strPassword password for the user
'* [out] intIntSize the initial size for the page file
'* [out] intMaxSize the maximum size for the page file
'* [out] objVols the object containing volume names
'* [out] strFormat the query display format
'* [out] intMainOption the main option specified
'*
'* Output: Returns true if all valid else displays error message and quits
'* Gets the password from the user if not specified along with User.
'*
'******************************************************************************
Private Function ValidateArguments ( ByRef strMachine, _
ByRef strUserName, _
ByRef strPassword, _
ByRef intIntSize, _
ByRef intMaxSize, _
ByRef objVols, _
ByRef strFormat, _
ByRef intMainOption)
ON ERROR RESUME NEXT
Err.Clear
Dim strMatchPattern ' the pattern to be matched
Dim intVolumes ' to count the no.of volumes specified
Dim arrVolume ' array to store the volumes specified
Dim i ' Loop variable
' Initialization
intVolumes = CInt(objVols.Count)
arrVolume = objVols.Keys
ValidateArguments = TRUE
i = 0
' Check if invalid server name is given
If NOT IsEmpty(strMachine) Then
If Trim(strMachine) = vbNullString Then
WScript.Echo(L_InvalidServerName_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
End If
' Check if invalid user name is given
If NOT IsEmpty(strUserName) Then
If Trim(strUserName) = vbNullString Then
WScript.Echo(L_InvalidUserName_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
End If
' check if user is given without machine OR password
If ((strUserName <> VBEmpty) AND (strMachine = VBEmpty)) Then
WScript.Echo L_InvalidServerCredentials_ErrorMessage
component.VBPrintf L_TypeUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
' check if password is given without user OR machine
ElseIf ((strPassword <> VBEmpty) AND (strUserName = VBEmpty))Then
WScript.Echo L_InvalidUserCredentials_ErrorMessage
component.VBPrintf L_TypeUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
End If
' Check if initial size is specified, validate if it is a poistive number
If Len(CStr(intIntSize)) > 0 Then
' Initsize should be numeric only
' chr(46) indicates "." (dot)
If NOT (IsNumeric(intIntSize) AND InStr(intIntSize,chr(46)) = 0 AND Instr(intIntSize,"-") = 0) Then
ValidateArguments = FALSE
WScript.Echo L_InvalidInitSizeValue_ErrorMessage
WScript.Quit(EXIT_INVALID_INPUT)
End If
End If
' Check if maximum size is specified, validate if it is a poistive number
If Len(CStr(intMaxSize)) > 0 Then
' Maxsize should be numeric only
' chr(46) indicates "." (dot)
If NOT (IsNumeric(intMaxSize) AND InStr(intMaxSize,chr(46)) = 0 AND Instr(intMaxSize,"-") = 0) Then
ValidateArguments = FALSE
WScript.Echo L_InvalidMaxSizeValue_ErrorMessage
WScript.Quit(EXIT_INVALID_INPUT)
End If
End If
Select Case CInt(intMainOption)
Case CONST_CHANGE_OPTION
' Valid Cases : either (initsize + volume) OR (maxsize + volume)
' OR (initsize + maxsize + volume)
' If none of the parameters (initsize or maxsize) is specified
If (Len(CStr(intIntSize)) = 0 AND Len(CStr(intMaxSize)) = 0) Then
ValidateArguments = FALSE
WScript.Echo(L_InvalidSyntax_ErrorMessage & " " & _
L_NoneoftheSizeSpecified_ErrorMessage)
component.VBPrintf L_TypeChangeUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
End If
' check if the volume is specified
If (objVols.Count = 0) Then
ValidateArguments = FALSE
WScript.Echo(L_InvalidSyntax_ErrorMessage & " " & _
L_VolumeNameNotSpecified_ErrorMessage)
component.VBPrintf L_TypeChangeUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
' check if volume name is valid
ElseIf isValidDrive(objVols,intMainOption) Then
ValidateArguments = TRUE
End If
Case CONST_CREATE_OPTION
' initsize is required
If ( Len(CStr(intIntSize)) = 0 ) Then
ValidateArguments = FALSE
WScript.Echo(L_InvalidSyntax_ErrorMessage & " " & _
L_InitialSizeNotSpecified_ErrorMessage)
component.VBPrintf L_TypeCreateUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
End If
' maxsize is required
If ( Len(CStr(intMaxSize)) = 0 ) Then
ValidateArguments = FALSE
WScript.Echo(L_InvalidSyntax_ErrorMessage & " " & _
L_MaximumSizeNotSpecified_ErrorMessage)
component.VBPrintf L_TypeCreateUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
End If
' volume name is required
If (objVols.Count = 0) Then
ValidateArguments = FALSE
WScript.Echo(L_InvalidSyntax_ErrorMessage & " " & _
L_VolumeNameNotSpecified_ErrorMessage)
component.VBPrintf L_TypeCreateUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
' check if volume name is valid
ElseIf isValidDrive(objVols,intMainOption) Then
ValidateArguments = TRUE
End If
Case CONST_DELETE_OPTION
' ONLY volume is required
If (objVols.Count = 0) Then
ValidateArguments = FALSE
WScript.Echo(L_InvalidSyntax_ErrorMessage & " " & _
L_VolumeNameNotSpecified_ErrorMessage)
component.VBPrintf L_TypeDeleteUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
' check if volume name is valid
ElseIf isValidDrive(objVols,intMainOption) Then
ValidateArguments = TRUE
End If
' Wild Card Character * is not allowed for /Delete option
If (objVols.Exists("*")) Then
ValidateArguments = FALSE
objVols.Remove "*"
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
Case CONST_QUERY_OPTION
' check if any format is specified.
If Len(strFormat) > 0 Then
' only table, list and csv display formats allowed
' L_PatternFormat_Text contains ^(table|list|csv)$
If CInt(component.matchPattern(L_PatternFormat_Text, strFormat)) = CONST_NO_MATCHES_FOUND Then
component.vbPrintf L_InvalidSyntax_ErrorMessage & " " & _
L_InvalidFormat_ErrorMessage, Array(strFormat)
component.VBPrintf L_TypeQueryUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
End If
End If
' Validation to check if volume names are specified with Query Option:
If (intVolumes <> 0) Then
ValidateArguments = FALSE
WScript.Echo(L_InvalidSyntax_ErrorMessage)
component.VBPrintf L_TypeQueryUsage_Message, _
Array(UCase(WScript.ScriptName))
WScript.Quit(EXIT_INVALID_INPUT)
End If
Case Else
' if intMainOption has some non-zero value means one operation is selected
If (intMainOption > 0) Then
' -operation & volname together are valid
ValidateArguments = TRUE
Else
ValidateArguments = FALSE
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
End Select
' verify If required credentials given
If (((NOT IsEmpty(strUserName)) AND (IsEmpty(strMachine))) OR _
((NOT IsEmpty(strPassword)) AND (IsEmpty(strUserName))) )Then
ValidateArguments = FALSE
WScript.Echo (L_InvalidCredentials_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
' check if the machine name is specified using "\\" (UNC format)
If Left(strMachine,2) = UNC_FORMAT_SERVERNAME_PREFIX Then
If Len(strMachine) = 2 Then
WScript.Echo L_InvalidInput_ErrorMessage
WScript.Quit(EXIT_UNEXPECTED)
End If
' remove the "\\" from the front
strMachine = Mid(strMachine,3,Len(strMachine))
End If
' If password not specified with the user name, Then get it
If ((NOT IsEmpty(strUserName)) AND (IsEmpty(strPassword))) Then
strPassword = component.getPassword()
End If
End Function
'******************************************************************************
'* Function: isValidDrive
'*
'* Purpose: To check if the specified volume is valid or not
'*
'* Input:
'* [in] objVols object that store the volumes specified
'* [in] intMainOption the main option specified
'*
'* Output: Returns TRUE or FALSE
'*
'******************************************************************************
Function isValidDrive(ByRef objVols,ByVal intMainOption)
ON ERROR RESUME NEXT
Err.Clear
Dim intVolumes ' to count the no.of volumes specified
Dim arrVolume ' array to store the volumes specified
Dim i ' Loop variable
' Initialization
intVolumes = CInt(objVols.Count)
arrVolume = objVols.Keys
isValidDrive = FALSE
i = 0
' Check if the drive name is in correct Format [c-z]: or [C-Z]:
' This has to be checked for each Drive specified - Do While Loop
Do While (i < intVolumes)
' Volumes specified are valid for all option except Query
If intMainOption <> CONST_QUERY_OPTION Then
' Valid volume is either '*' OR a letter followed by a colon (total length = 2)
If ((Len(arrVolume(i)) = 2) AND (InStr(arrVolume(i),chr(58)) = 2) OR arrVolume(i) = "*") Then
' check if the volume name specified is in the format ^([c-zC-Z]:|\*)$
If CInt(component.matchPattern(L_VolumePatternFormat_Text,arrVolume(i))) = CONST_NO_MATCHES_FOUND Then
' Invalid Volume Names or junk data is specified
component.VBPrintf L_InvalidVolumeName_ErrorMessage, _
Array(arrVolume(i))
isValidDrive = FALSE
' remove the INVALID drive(s)
objVols.Remove arrVolume(i)
End If
Else
isValidDrive = FALSE
component.VBPrintf L_InvalidVolumeName_ErrorMessage, _
Array(arrVolume(i))
objVols.Remove arrVolume(i)
End If
' check the number of valid drives specified
If objVols.Count = 0 Then
WScript.Quit(EXIT_INVALID_INPUT)
End If
Else
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit (EXIT_INVALID_INPUT)
End If
isValidDrive = isValidDrive OR TRUE
i = i + 1
Loop
End Function
'******************************************************************************
'* Sub: ProcessChange
'*
'* Purpose: Processes the /Change option and displays the changed
'* details of the page file
'*
'* Input:
'* [in] strMachine machine to configure page files on
'* [in] strUserName user name to connect to the machine
'* [in] strPassword password for the user
'* [in] intIntSize the initial size for the page file
'* [in] intMaxSize the maximum size for the page file
'* [in] objVols the object containing volume names
'*
'* Output: Displays error message and quits if connection fails
'*
'******************************************************************************
Private Sub ProcessChange( ByVal strMachine, _
ByVal strUserName, _
ByVal strPassword, _
ByVal intIntSize, _
ByVal intMaxSize, _
ByVal objVols )
ON ERROR RESUME NEXT
Err.Clear
Dim intOldInitialSize ' to store the old intial size
Dim intOldMaximumSize ' to store the old maximum size
Dim arrVolume ' to store all the volumes specified
Dim intVolumes ' to store the no.of volumes specified
Dim strQuery ' to store the query for pagefiles
Dim strQueryDisk ' to store the query for disk
Dim strQueryComp ' to store the query for computersystem
Dim objService ' service object
Dim objInstance ' instance object
Dim objInst ' instance object
Dim objEnumerator ' collection set for query results
Dim objEnumforDisk ' collection set for query results
Dim objEnum ' collection set for query results
Dim blnBothSpecified ' flag to check if both initsize & maxsize are specified
Dim blnSuccessMsg ' flag to check if a SUCCESS message is generated
Dim intFreeSpace ' to store total free space
Dim intFreeDiskSpace ' to store free disk space
Dim intCurrentSize ' to store the current pagefile size
Dim intDiskSize ' to store the disk size for the specified disk
Dim intMemSize ' to store physical memory size
Dim intCrashDump ' to store the current crash dump setting value
Dim strReply ' to store the user reply
Dim strDriveName ' to store the drive name
Dim strHostName ' to store the host name
Dim intMaxSizeUB ' to store the upper bound for maximum size
Dim i ' loop variable
' Establish a connection with the server.
If NOT component.wmiConnect(CONST_NAMESPACE_CIMV2 , _
strUserName , _
strPassword , _
strMachine , _
blnLocalConnection, _
objService ) Then
WScript.Echo(L_HintCheckConnection_Message)
WScript.Quit(EXIT_METHOD_FAIL)
End If
' Initialize variables
i = 0
intFreeSpace = 0
intFreeDiskSpace = 0
intCurrentSize = 0
blnBothSpecified = FALSE
blnSuccessMsg = FALSE
intMaxSizeUB = 0
strQuery = "Select * From " & CLASS_PAGE_FILE_SETTING
If (objVols.Exists("*")) Then
Set objEnumerator = objService.ExecQuery(strQuery, "WQL", 0, null)
For each objInstance in objEnumerator
strDriveName = Mid(objInstance.Name,1,2)
If NOT objVols.Exists (LCase(strDriveName)) Then
objVols.add LCase(strDriveName), -1
End If
Next
objVols.remove "*"
End If
intVolumes = objVols.Count
arrVolume = objVols.keys
' get the host Name - used to get Crash Dump Settings
strQueryComp = "Select * From " & CLASS_COMPUTER_SYSTEM
Set objEnum = objService.ExecQuery(strQueryComp, "WQL", 0, null)
' check for any errors
If Err.Number Then
Err.Clear
WScript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
For each objInst in objEnum
If NOT ISEmpty(objInst.Name) Then
strHostName = objInst.Name
Else
WScript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
Next
' check if initsize and maxsize both are specified
If (Len(intIntSize) > 0 AND Len(intMaxSize) > 0) Then
blnBothSpecified = TRUE
End If
' check if no page files exist on the system.
strQuery = "Select * From " & CLASS_PAGE_FILE_SETTING
Set objEnumerator = objService.ExecQuery(strQuery, "WQL", 0, null)
If (objEnumerator.Count = 0) Then
WScript.Echo(L_NoPageFiles_Message)
WScript.Quit(EXIT_UNEXPECTED)
End If
' release the object for re-use.
Set objEnumerator = nothing
Do While( i < intVolumes )
' check if its a valid drive/volume - check from Win32_LogicalDisk
strQueryDisk = "Select * From " & CLASS_LOGICAL_DISK & _
" where DriveType = " & DRIVE_TYPE & " and DeviceID = '" & arrVolume(i) & "'"
Set objEnumforDisk = objService.ExecQuery(strQueryDisk, "WQL", 0, null)
If objEnumforDisk.Count > 0 Then
strQuery = "Select * From " & CLASS_PAGE_FILE_SETTING
strQuery = strQuery & " where NAME = '" & arrVolume(i) & _
"\" & PAGEFILE_DOT_SYS & "'"
Set objEnumerator = objService.ExecQuery(strQuery, "WQL", 0, null)
' check for any errors
If Err.Number Then
Err.Clear
WScript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
' check if a page file exists on the specified volume
If (objEnumerator.Count > 0) Then
For each objInstance in objEnumerator
' check for system managed pagefiles
If (objInstance.InitialSize = 0 AND objInstance.MaximumSize = 0) Then
component.VBPrintf L_SystemManagedSize_ErrorMessage, _
Array(UCase(arrVolume(i)))
Else
strDriveName = Mid(objInstance.Name,1,2)
If NOT blnBothSpecified Then
' check if initsize is given
If (intIntSize > 0) Then
' Check if initsize is greater than 2 MB
If CLng(intIntSize) >= CLng(INITIAL_SIZE_LB) Then
' check for overflows
If Err.Number Then
Err.Clear
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
WScript.Quit(EXIT_INVALID_INPUT)
End If
' get the drive name first
strDriveName = Mid(objInstance.Name,1,2)
' get the free space available on the specified disk
intFreeDiskSpace = getFreeSpaceOnDisk(strDriveName,objService)
' get the current pagefile size
intCurrentSize = getCurrentPageFileSize(objService,objInstance)
' get the total free space
If Len(intCurrentSize) > 0 Then
intFreeSpace = intFreeDiskSpace + intCurrentSize
Else
WScript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
' Check if it is greater than free disk space
If CLng(intIntSize) > CLng(intFreeSpace) Then
' check for overflows
If Err.Number Then
Err.Clear
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
WScript.Quit(EXIT_INVALID_INPUT)
End If
WScript.Echo(NotEnoughSpaceErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
Else
If CLng(intIntSize) > CLng(intFreeSpace) - 5 Then
' check for overflows
If Err.Number Then
Err.Clear
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
WScript.Echo(AtLeastFiveMBErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
Else
' only one of initsize, maxsize is specified
' check if the specified initsize is less than existing maxsize
If (CInt(intIntSize) <= objInstance.MaximumSize) Then
' get the crash dump setting value
intCrashDump = GetCrashDumpSetting(strUserName,strPassword,strMachine)
' get the Physical Memory Size
intMemSize = GetPhysicalMemorySize(strHostName,objService)
' If the user has selected "yes" for the warning message
If isCrashDumpValueSet(intCrashDump,intIntSize,intMemSize,arrVolume(i)) Then
' Check if initsize is same as the present value
If (CInt(intIntSize) <> objInstance.InitialSize) Then
' store the old initsize value
intOldInitialSize = objInstance.InitialSize
' set the new initsize
objInstance.InitialSize = intIntSize
objInstance.Put_(CONST_WBEM_FLAG)
If Err.Number Then
Err.Clear
WScript.Echo(L_UpdateFailed_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf ChangeIntSuccessMessage, _
Array(UCase(arrVolume(i)),CInt(intOldInitialSize),CInt(intIntSize))
blnSuccessMsg = TRUE
Else
component.VBPrintf ChangeIntSkippingMessage, Array(UCase(arrVolume(i)))
End If
End If
Else
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
End If
End If
End If
Else
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InitialSizeRangeErrorMessage, _
Array(intMaxSizeUB)
WScript.Quit(EXIT_INVALID_INPUT)
End If
Else
' Check if initsize specified as 0
If Len(intIntSize) > 0 Then
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InitialSizeRangeErrorMessage, _
Array(intMaxSizeUB)
WScript.Quit(EXIT_INVALID_INPUT)
End If
End If ' initsize checked
' check if maxsize is given
If (intMaxSize > 0) Then
' get the free space available on the specified disk
intFreeDiskSpace = getFreeSpaceOnDisk(strDriveName,objService)
' get the current pagefile size
intCurrentSize = getCurrentPageFileSize(objService,objInstance)
' get the total free space
If Len(intCurrentSize) > 0 Then
intFreeSpace = intFreeDiskSpace + intCurrentSize
Else
WScript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
' Get the Disk Size for the specified drive
intDiskSize = GetDiskSize(arrVolume(i),objService)
' check if maxsize is more than initsize
If (CLng(intMaxSize) > CLng(intDiskSize)) Then
' check for overflows
If Err.Number Then
Err.Clear
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf DiskTooSmallErrorMessage, Array(UCase(arrVolume(i)))
Else
If (CLng(intMaxSize) > CLng(intFreeSpace)) Then
' check for overflows
If Err.Number Then
Err.Clear
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf GrowsToFreeSpaceWarningMessage, _
Array(UCase(arrVolume(i)),intFreeSpace)
strReply = getReply()
If Trim(LCase(strReply)) = L_UserReplyYes_Text Then
' set the maxsize to be the free space on disk
intMaxSize = intFreeSpace
' check if the given maxsize is greater than the existing initial size.
If (CInt(intMaxSize) >= objInstance.InitialSize) Then
If (CInt(intMaxSize) <> objInstance.MaximumSize) Then
intOldMaximumSize = objInstance.MaximumSize
objInstance.MaximumSize = intMaxSize
objInstance.Put_(CONST_WBEM_FLAG)
If Err.Number Then
Err.Clear
WScript.Echo(L_UpdateFailed_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf ChangeMaxSuccessMessage, _
Array(UCase(arrVolume(i)),CInt(intOldMaximumSize),CInt(intMaxSize))
blnSuccessMsg = TRUE
Else
component.VBPrintf ChangeMaxSkippingMessage, Array(UCase(arrVolume(i)))
End If
Else
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
End If
ElseIf LCase(strReply) = L_UserReplyNo_Text Then
WScript.Quit(EXIT_SUCCESS)
Else
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit (EXIT_INVALID_INPUT)
End If
Else
If (CInt(intMaxSize) >= objInstance.InitialSize) Then
If (CInt(intMaxSize) <> objInstance.MaximumSize) Then
intOldMaximumSize = objInstance.MaximumSize
objInstance.MaximumSize = intMaxSize
objInstance.Put_(CONST_WBEM_FLAG)
If Err.Number Then
Err.Clear
WScript.Echo(L_UpdateFailed_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf ChangeMaxSuccessMessage, _
Array(UCase(arrVolume(i)),CInt(intOldMaximumSize),CInt(intMaxSize))
blnSuccessMsg = TRUE
Else
component.VBPrintf ChangeMaxSkippingMessage, Array(UCase(arrVolume(i)))
End If
Else
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
End If
End If
End If
Else
' Check if maxsize specified as 0
If Len(intMaxSize) > 0 Then
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
End If
End If ' maxsize checked
Else
' Case when both initsize and maxsize are selected
' check if maxsize is greater than initsize
' this will detect any overflow problems, if any
If CLng(intIntSize) > CLng(intMaxSize) Then
' check for overflows and clear the error
If Err.Number Then Err.Clear
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
WScript.Quit(EXIT_INVALID_INPUT)
End If
If (intIntSize > 0) Then
' Check if initsize is greater than 2 MB
If CLng(intIntSize) >= CLng(INITIAL_SIZE_LB) Then
' check for overflows
If Err.Number Then
Err.Clear
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
WScript.Quit(EXIT_INVALID_INPUT)
End If
' get the free space available on the specified disk
intFreeDiskSpace = getFreeSpaceOnDisk(strDriveName,objService)
' get the current pagefile size
intCurrentSize = getCurrentPageFileSize(objService,objInstance)
' get the total free space
If Len(intCurrentSize) > 0 Then
intFreeSpace = intFreeDiskSpace + intCurrentSize
Else
WScript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
' check if it is greater than free disk space
If CLng(intIntSize) > CLng(intFreeSpace) Then
' check for overflows
If Err.Number Then
Err.Clear
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
WScript.Quit(EXIT_INVALID_INPUT)
End If
WScript.Echo(NotEnoughSpaceErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
If CLng(intIntSize) > CLng(intFreeSpace) - 5 Then
' check for overflows
If Err.Number Then
Err.Clear
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
WScript.Echo(AtLeastFiveMBErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
Else
' get the crash dump setting value
intCrashDump = GetCrashDumpSetting(strUserName,strPassword,strMachine)
' get the Physical Memory Size
intMemSize = GetPhysicalMemorySize(strHostName,objService)
' If the user has selected "yes" for the warning message
If isCrashDumpValueSet(intCrashDump,intIntSize,intMemSize,arrVolume(i)) Then
' store the old initsize value
intOldInitialSize = objInstance.InitialSize
' set the new initsize
objInstance.InitialSize = intIntSize
' check if maxsize is given
If (intMaxSize > 0) Then
' Get the Disk Size for the specified drive
intDiskSize = GetDiskSize(arrVolume(i),objService)
' check if maxsize is more than initsize
If (CLng(intMaxSize) > CLng(intDiskSize)) Then
' check for overflows
If Err.Number Then
Err.Clear
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf DiskTooSmallErrorMessage, _
Array(UCase(arrVolume(i)))
Else
If (CLng(intMaxSize) > CLng(intFreeSpace)) Then
' check for overflows
If Err.Number Then
Err.Clear
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf GrowsToFreeSpaceWarningMessage, _
Array(UCase(arrVolume(i)),intFreeSpace)
strReply = getReply()
If Trim(LCase(strReply)) = L_UserReplyYes_Text Then
' set the maxsize to be the free space on disk
intMaxSize = intFreeSpace
intOldMaximumSize = objInstance.MaximumSize
objInstance.MaximumSize = intMaxSize
If ( CInt(intIntSize) <> intOldInitialSize ) Then
objInstance.Put_(CONST_WBEM_FLAG)
If Err.Number Then
Err.Clear
WScript.Echo(L_UpdateFailed_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf ChangeIntSuccessMessage, _
Array(UCase(arrVolume(i)),CInt(intOldInitialSize),CInt(intIntSize))
blnSuccessMsg = TRUE
Else
component.VBPrintf ChangeIntSkippingMessage, _
Array(UCase(arrVolume(i)))
End If
If (CInt(intMaxSize) <> intOldMaximumSize) Then
objInstance.Put_(CONST_WBEM_FLAG)
If Err.Number Then
Err.Clear
WScript.Echo(L_UpdateFailed_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf ChangeMaxSuccessMessage, _
Array(UCase(arrVolume(i)),CInt(intOldMaximumSize),CInt(intMaxSize))
blnSuccessMsg = TRUE
Else
component.VBPrintf ChangeMaxSkippingMessage, _
Array(UCase(arrVolume(i)))
End If
ElseIf LCase(strReply) = L_UserReplyNo_Text Then
WScript.Quit(EXIT_SUCCESS)
Else
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit (EXIT_INVALID_INPUT)
End If
Else
intOldMaximumSize = objInstance.MaximumSize
objInstance.MaximumSize = intMaxSize
objInstance.Put_(CONST_WBEM_FLAG)
If Err.Number Then
Err.Clear
WScript.Echo(L_UpdateFailed_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
If (CInt(intIntSize) <> intOldInitialSize ) Then
component.VBPrintf ChangeIntSuccessMessage, _
Array(UCase(arrVolume(i)),CInt(intOldInitialSize),CInt(intIntSize))
blnSuccessMsg = TRUE
Else
component.VBPrintf ChangeIntSkippingMessage, Array(UCase(arrVolume(i)))
End If
If (CInt(intMaxSize) <> intOldMaximumSize) Then
component.VBPrintf ChangeMaxSuccessMessage, _
Array(UCase(arrVolume(i)),CInt(intOldMaximumSize),CInt(intMaxSize))
blnSuccessMsg = TRUE
Else
component.VBPrintf ChangeMaxSkippingMessage, Array(UCase(arrVolume(i)))
End If
End If
End If
Else
' Check if maxsize specified as 0
If Len(intMaxSize) > 0 Then
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
End If
End If ' maxsize checked
End If
End If
Else
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InitialSizeRangeErrorMessage, _
Array(intMaxSizeUB)
WScript.Quit(EXIT_INVALID_INPUT)
End If
Else
' Check if initsize specified as 0
If Len(intIntSize) > 0 Then
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InitialSizeRangeErrorMessage, _
Array(intMaxSizeUB)
WScript.Quit(EXIT_INVALID_INPUT)
End If
End If ' initsize checked
End If
End If
Next
Else
component.VBPrintf L_PageFileDoesNotExist_ErrorMessage, _
Array(UCase(arrVolume(i)))
End If
Else
' the drive does not exist
component.VBPrintf L_InvalidVolumeName_ErrorMessage, _
Array(UCase(arrVolume(i)))
' remove the drive name from the valid drives list
objVols.Remove arrVolume(i)
' decrement the loop count
i = i - 1
' check for the no.of valid drive names from the specified list.
If Cint(objVols.Count) = 0 Then
WScript.Quit(EXIT_INVALID_INPUT)
Else
intVolumes = objVols.Count
arrVolume = objVols.keys
End If
End If
i = i + 1
Loop
If blnSuccessMsg = TRUE then
WScript.Echo L_RestartComputer_Message
End If
End Sub
'******************************************************************************
'* Sub: ProcessCreate
'*
'* Purpose: Creates new page files with the given specifications
'*
'* Input:
'* [in] strMachine machine to configure page files on
'* [in] strUserName user name to connect to the machine
'* [in] strPassword password for the user
'* [in] intIntSize the initial size for the page file
'* [in] intMaxSize the maximum size for the page file
'* [in] objVols the object containing volume names
'*
'* Output: Displays error message and quits if connection fails
'*
'******************************************************************************
Private Sub ProcessCreate( ByVal strMachine, _
ByVal strUserName, _
ByVal strPassword, _
ByVal intIntSize, _
ByVal intMaxSize, _
ByVal objVols )
ON ERROR RESUME NEXT
Err.Clear
Dim arrVolume ' to store all the volumes specified
Dim intVolumes ' to store the no.of volumes specified
Dim strQuery ' to store the query for pagefiles
Dim strQueryDisk ' to store the query for disk
Dim strQueryComp ' to store the query for getting host name
Dim objService ' service object
Dim objInst ' instance object
Dim objInstance ' instance object
Dim objNewInstance ' instance object
Dim objEnum ' collection object for query results
Dim objEnumforDisk ' collection object for query results
Dim blnSuccessMsg ' flag to check if a SUCCESS message is generated
Dim intFreeSpace ' to store total free space
Dim intFreeDiskSpace ' to store free disk space
Dim intCurrentSize ' to store the current pagefile size
Dim intDiskSize ' to store the disk size for the specified disk
Dim intMemSize ' to store physical memory size
Dim intCrashDump ' to store the current crash dump setting value
Dim strReply ' to store the user reply
Dim strHostName ' to store the host name
Dim intMaxSizeUB ' to store the upper bound for maximum size
Dim i ' Loop variable
' variables used only if * is specified
Dim objEnumerator ' collection object for query results
i = 0
intFreeSpace = 0
intFreeDiskSpace = 0
intCurrentSize = 0
intMaxSizeUB = 0
' intIntSize = CLng(intIntSize)
' intMaxSize = CLng(intMaxSize)
blnSuccessMsg = FALSE
If NOT component.wmiConnect(CONST_NAMESPACE_CIMV2 , _
strUserName , _
strPassword , _
strMachine , _
blnLocalConnection , _
objService ) Then
WScript.Echo(L_HintCheckConnection_Message)
WScript.Quit(EXIT_METHOD_FAIL)
End If
If (objVols.Exists("*")) Then
' build the query
intVolumes = 0
' get all the drive names with drive type = 3 (other than floppy drive & CDROM Drive)
strQuery = "Select DeviceID From " & CLASS_LOGICAL_DISK & _
" where DriveType = " & DRIVE_TYPE
' execute the query
Set objEnumerator = objService.ExecQuery(strQuery, "WQL", 48, null)
' check for any errors
If Err.Number Then
Err.Clear
WScript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
For each objInstance in objEnumerator
' check if the volumename is not an alias name and neither a mapped drive.
If IsValidPhysicalDrive(objService, objInstance.DeviceID) Then
' check if the volume name is specified more than once.
If NOT objVols.Exists(LCase(objInstance.DeviceID)) Then
objVols.Add LCase(objInstance.DeviceID),-1
End If
End If
Next
' Remove * from objVols after adding the drives to the object.
objVols.Remove "*"
End If
intVolumes = objVols.Count
arrVolume = objVols.Keys
' Get the host Name - used to get Crash Dump Settings
strQueryComp = "Select * From " & CLASS_COMPUTER_SYSTEM
Set objEnum = objService.ExecQuery(strQueryComp, "WQL", 0, null)
' check for any errors
If Err.Number Then
Err.Clear
WScript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
For each objInst in objEnum
If NOT ISEmpty(objInst.Name) Then
strHostName = objInst.Name
Else
WSCript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
Next
' No wild Cards Specified
Do While( i < intVolumes )
strQueryDisk = "Select * From " & CLASS_LOGICAL_DISK & _
" where DriveType = " & DRIVE_TYPE & " and DeviceID = '" & arrVolume(i) & "'"
Set objEnumforDisk = objService.ExecQuery(strQueryDisk, "WQL", 0, null)
strQuery = "Select * From " & CLASS_PAGE_FILE_SETTING & _
" where Name = '" & arrVolume(i) & "\" & PAGEFILE_DOT_SYS & "'"
Set objEnum = objService.ExecQuery(strQuery, "WQL", 0, null)
' If valid drive and pagefile exists on that drive
If (objEnumforDisk.Count = 0 AND objEnum.Count = 0 ) Then
' the drive does not exist
component.VBPrintf L_InvalidVolumeName_ErrorMessage, _
Array(UCase(arrVolume(i)))
' remove the drive name from the valid drives list
objVols.Remove arrVolume(i)
' decrement the loop count
i = i - 1
' check for the no.of valid drive names from the specified list.
If Cint(objVols.Count) = 0 Then
WScript.Quit(EXIT_INVALID_INPUT)
Else
intVolumes = objVols.Count
arrVolume = objVols.keys
End If
Else
' SKIP - if at least one instance is found then dont create a new instance
If (objEnumforDisk.Count = 1 AND objEnum.Count = 1) Then
component.VBPrintf L_CreateSkipping_Message, _
Array(UCase(arrVolume(i)))
Else
' check if the volumename is an alias name or a mapped drive
If NOT IsValidPhysicalDrive(objService, arrVolume(i)) Then
component.VBPrintf L_InvalidPhysicalDrive_ErrorMessage, _
Array(UCase(arrVolume(i)))
Else
' set the security privilege to allow pagefile creation
objService.Security_.Privileges.AddAsString("SeCreatePagefilePrivilege")
If Err.Number then
Err.Clear
WScript.Echo("ERROR: Failed to set the security privilege.")
WScript.Quit(EXIT_METHOD_FAIL)
End If
Set objInstance = objService.Get(CLASS_PAGE_FILE_SETTING)
' check for any errors
If Err.Number Then
Err.Clear
WScript.Echo(L_CannotCreate_ErrorMessage)
WScript.Quit(EXIT_METHOD_FAIL)
End If
Set objNewInstance = objInstance.SpawnInstance_
' check for any errors
If Err.Number Then
Err.Clear
WScript.Echo(L_CannotCreate_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
' append the filename to the volume name
objNewInstance.Name = UCase(arrVolume(i)) & PAGEFILE_DOT_SYS
' check if maxsize is greater than initsize
' this will detect any overflow problems, if any
If ( CLng(intIntSize) > CLng(intMaxSize) ) Then
' check for overflows and clear the error
If Err.Number Then Err.Clear
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
WScript.Quit(EXIT_INVALID_INPUT)
End If
' Check the initial size with the free space on the disk
If CLng(intIntSize) >= CLng(INITIAL_SIZE_LB) Then
' check for overflows
If Err.Number Then
Err.Clear
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
' get the free space on the specified disk
intFreeDiskSpace = getFreeSpaceOnDisk(arrVolume(i),objService)
' get the current pagefile size
intCurrentSize = getCurrentPageFileSize(objService,objInstance)
' get the total free space
' Since its a new instance the current size will
' NOT be available. So the initial size is taken
' into considerarion for calculating the total
' free space.
intFreeSpace = intFreeDiskSpace + intIntSize
' Check if it greater than free disk space
If CLng(intIntSize) > CLng(intFreeSpace) Then
' check for overflows
If Err.Number Then
Err.Clear
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
WScript.Echo(NotEnoughSpaceErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
If CLng(intIntSize) > CLng(intFreeSpace) - 5 Then
' check for overflows
If Err.Number Then
Err.Clear
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
WScript.Echo(AtLeastFiveMBErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
' get the crash dump setting value
intCrashDump = GetCrashDumpSetting(strUserName,strPassword,strMachine)
' get the Physical Memory Size
intMemSize = GetPhysicalMemorySize(strHostName,objService)
' check if the user has selected "yes" for the warning message
If isCrashDumpValueSet(intCrashDump,intIntSize,intMemSize,arrVolume(i)) Then
objNewInstance.InitialSize = CInt(intIntSize)
' Get the Disk Size for the specified drive
intDiskSize = GetDiskSize(arrVolume(i),objService)
If (CLng(intMaxSize) > CLng(intDiskSize)) Then
' check for overflows
If Err.Number Then
Err.Clear
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InsufficientMaxSizeErrorMessage, _
Array( UCase(arrVolume(i)) , intMaxSizeUB )
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf DiskTooSmallErrorMessage, _
Array(UCase(arrVolume(i)))
Else
If (CLng(intMaxSize) > CLng(intFreeSpace)) Then
' check for overflows
If Err.Number Then
Err.Clear
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf GrowsToFreeSpaceWarningMessage, _
Array(UCase(arrVolume(i)),intFreeSpace)
strReply = getReply()
If Trim(LCase(strReply)) = L_UserReplyYes_Text Then
' maxsize can grow only to the free disk space available.
' set the maxsize to the free space on disk.
intMaxSize = intFreeSpace
objNewInstance.MaximumSize = intMaxSize
objNewInstance.Put_(CONST_WBEM_FLAG)
If Err.Number Then
Err.Clear
WScript.Echo(L_CannotCreate_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf CreateSuccessMessage, _
Array(CInt(intIntSize),CInt(intMaxSize),UCase(arrVolume(i)))
blnSuccessMsg = TRUE
ElseIf LCase(strReply) = L_UserReplyNo_Text Then
WScript.Quit(EXIT_SUCCESS)
Else
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit (EXIT_INVALID_INPUT)
End If
Else
objNewInstance.MaximumSize = CInt(intMaxSize)
objNewInstance.Put_(CONST_WBEM_FLAG)
If Err.Number Then
Err.Clear
WScript.Echo(L_CannotCreate_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf CreateSuccessMessage, _
Array(CInt(intIntSize),CInt(intMaxSize),UCase(arrVolume(i)))
blnSuccessMsg = TRUE
End If
End If
End If
Else
' get the upper bound allowed for maximum size
intMaxSizeUB = getMaxSizeUB(objService)
component.VBPrintf InitialSizeRangeErrorMessage, Array(intMaxSizeUB)
End If
End If
End If
End If
i = i + 1
Loop
If blnSuccessMsg = TRUE then
WScript.Echo L_RestartComputer_Message
End If
End Sub
'******************************************************************************
'* Sub: ProcessDelete
'*
'* Purpose: Deletes existing page files on the specified volumes
'*
'* Input:
'* [in] strMachine machine to configure page files on
'* [in] strUserName user name to connect to the machine
'* [in] strPassword password for the user
'* [in] objVols the object containing volume names
'*
'* Output: Displays error message and quits if connection fails
'*
'******************************************************************************
Private Sub ProcessDelete ( ByVal strMachine, _
ByVal strUserName, _
ByVal strPassword, _
ByVal objVols )
ON ERROR RESUME NEXT
Err.Clear
Dim arrVolume ' to store all the volumes specified
Dim intVolumes ' to store the no.of volumes specified
Dim objService ' service object
Dim objInstance ' instance object
Dim blnSuccessMsg ' flag to check if a SUCCESS message is generated
Dim strQueryDisk ' to store the query for disk
Dim objEnumforDisk ' collection object for query results
Dim intMemSize ' to store physical memory size
Dim intCrashDump ' to store the current crash dump setting value
Dim strQueryComp ' to store the query for computersystem
Dim objEnum ' collection object for query results
Dim objInst ' instance object
Dim strHostName ' to store the host name
Dim i ' Loop variable
If NOT component.wmiConnect(CONST_NAMESPACE_CIMV2 , _
strUserName , _
strPassword , _
strMachine , _
blnLocalConnection , _
objService ) Then
WScript.Echo(L_HintCheckConnection_Message)
WScript.Quit(EXIT_METHOD_FAIL)
End If
i = 0
blnSuccessMsg = FALSE
intVolumes = objVols.Count
arrVolume = objVols.Keys
' Get the host Name - used to get Crash Dump Settings
strQueryComp = "Select * From " & CLASS_COMPUTER_SYSTEM
Set objEnum = objService.ExecQuery(strQueryComp, "WQL", 0, null)
' check for any errors
If Err.Number Then
Err.Clear
WScript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
For each objInst in objEnum
If NOT ISEmpty(objInst.Name) Then
strHostName = objInst.Name
Else
WSCript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
Next
Do While( i < intVolumes )
strQueryDisk = "Select * From " & CLASS_LOGICAL_DISK & _
" where DriveType = " & DRIVE_TYPE & " and DeviceID = '" & arrVolume(i) & "'"
Set objEnumforDisk = objService.ExecQuery(strQueryDisk, "WQL", 0, null)
If objEnumforDisk.Count > 0 Then
Set objInstance = objService.Get(CLASS_PAGE_FILE_SETTING & "='" & _
arrVolume(i) & PAGEFILE_DOT_SYS & "'")
If Err.Number Then
Err.Clear
component.VBPrintf L_PageFileDoesNotExist_ErrorMessage, _
Array(UCase(arrVolume(i)))
Else
' check for system managed pagefiles
If (objInstance.InitialSize = 0 AND objInstance.MaximumSize = 0) Then
component.VBPrintf L_SystemManagedSize_ErrorMessage, _
Array(UCase(arrVolume(i)))
Else
' get the crash dump setting value
intCrashDump = GetCrashDumpSetting(strUserName,strPassword,strMachine)
' get the Physical Memory Size
intMemSize = GetPhysicalMemorySize(strHostName,objService)
' If the user has selected "yes" for the warning message
' pass initsize as 0 because initsize = maxsize = 0 (assumed) after deletion
If isCrashDumpValueSet(intCrashDump,0,intMemSize,arrVolume(i)) Then
' Delete the instance
objInstance.Delete_
' check for any errors
If Err.Number Then
Err.Clear
WScript.Echo(L_InvalidInput_ErrorMessage)
WScript.Quit(EXIT_INVALID_INPUT)
End If
component.VBPrintf L_DeleteSuccess_Message, _
Array(UCase(arrVolume(i)))
blnSuccessMsg = TRUE
End If
End If
End If
Else
' the drive does not exist
component.VBPrintf L_InvalidVolumeName_ErrorMessage, _
Array(UCase(arrVolume(i)))
' remove the drive name from the valid drives list
objVols.Remove arrVolume(i)
' decrement the loop count
i = i - 1
' check for the no.of valid drive names from the specified list.
If Cint(objVols.Count) = 0 Then
WScript.Quit(EXIT_INVALID_INPUT)
Else
intVolumes = objVols.Count
arrVolume = objVols.keys
End If
End If
i = i + 1
Loop
' The instances of the following classes are also deleted along with the Win32_PageFile instances
' Win32_PageFileUsage - instances are deleted only after reboot
' Win32_PageFileSetting - instances are deleted automatically along with Win32_PageFile instances
If blnSuccessMsg = TRUE then
WScript.Echo L_RestartComputer_Message
End If
End sub
'******************************************************************************
'* Sub: ProcessQuery
'*
'* Purpose: Displays the Page File Details in the specified format
'*
'* Input:
'* [in] strMachine machine to configure page files on
'* [in] strUserName user name to connect to the machine
'* [in] strPassword password for the user
'* [in] strFormat the query display format
'*
'* Output: Displays error message and quits if connection fails
'* Calls component.showResults() to display the page file
'* details
'*
'******************************************************************************
Private Sub ProcessQuery( ByVal strMachine, _
ByVal strUserName, _
ByVal strPassword, _
ByVal strFormat )
ON ERROR RESUME NEXT
Err.Clear
Dim objEnumerator ' to store the results of the query is executed
Dim objInstance ' to refer to the instances of the objEnumerator
Dim strQuery ' to store the query obtained for given conditions
Dim intTotSize ' to store the total size on all drives
Dim intRecommendedSize ' to store the recommended size for all drives
Dim arrResultsDrives ' to store the columns of page file info.
Dim arrHeaderDrives ' to store the array header values
Dim arrMaxLengthDrives ' to store the maximum length for each column
Dim arrFinalResultsDrives ' used to send the arrResults to ShowResults()
Dim intColumnCountDrives ' number of columns to be displayed in the output
Dim blnPrintHeaderDrives ' variable which decides whether header is to be displayed or not
Dim arrResultsSummary ' to store the columns of page file info.
Dim arrHeaderSummary ' to store the array header values
Dim arrMaxLengthSummary ' to store the maximum length for each column
Dim arrFinalResultsSummary ' used to send the arrResults to ShowResults()
Dim intColumnCountSummary ' number of columns to be displayed in the output
Dim blnPrintHeaderSummary ' variable which decides whether header is to be displayed or not
Dim objDiskDriveInstance ' Instance for drive name
Dim objMemSizeInstance ' Instance for memory size
Dim arrblnNoDisplayDrives ' boolean variable for -noheader option
Dim arrblnNoDisplaySummary ' boolean variable for -noheader option
Dim objService ' service object
Dim strDriveName ' to store the drive name
Dim objUsageInstance ' Instance for PageFileUsage
' Initializing the blnPrintHeaders to true. Header should be printed by default
blnPrintHeaderDrives = TRUE
blnPrintHeaderSummary = TRUE
intTotSize = 0
If NOT component.wmiConnect(CONST_NAMESPACE_CIMV2 , _
strUserName , _
strPassword , _
strMachine , _
blnLocalConnection , _
objService ) Then
WScript.Echo(L_HintCheckConnection_Message)
WScript.Quit(EXIT_METHOD_FAIL)
End If
arrHeaderDrives = Array(L_ColHeaderHostname_Text , L_ColHeaderDrive_Text, _
L_ColHeaderVolumeLabel_Text, L_ColHeaderFileName_Text, _
L_ColHeaderInitialSize_Text, L_ColHeaderMaximumSize_Text, _
L_ColHeaderCurrentSize_Text, L_ColHeaderFreeSpace_Text)
arrHeaderSummary = Array(L_ColHeaderHostname_Text, L_ColHeaderTotalMinimumSize_Text, _
L_ColHeaderTotalRecommendedSize_Text, L_ColHeaderTotalSize_Text)
' Data Lengths = (15,13,13,19,20,20,20,22)
arrMaxLengthDrives = Array(CONST_HOSTNAME_LENGTH, CONST_DRIVENAME_LENGTH, CONST_VOLLABEL_LENGTH, _
CONST_PAGEFILENAME_LENGTH, CONST_INTSIZE_LENGTH, CONST_MAXSIZE_LENGTH, _
CONST_CURRENTSIZE_LENGTH, CONST_FREESPACE_LENGTH)
' Data Lengths = (15,33,37,40)
arrMaxLengthSummary = Array(CONST_HOSTNAME_LENGTH,CONST_TOTALMINSIZE_LENGTH,_
CONST_TOTALRECSIZE_LENGTH,CONST_TOTALSIZE_LENGTH)
arrblnNoDisplayDrives = Array(0,0,0,0,0,0,0,0)
arrblnNoDisplaySummary = Array(0,0,0,0)
' first initialize the array with N/A
arrResultsDrives = Array(L_Na_Text,L_Na_Text,L_Na_Text,L_Na_Text,L_Na_Text,L_Na_Text,_
L_Na_Text,L_Na_Text)
arrResultsSummary = Array(L_Na_Text,L_Na_Text,L_Na_Text,L_Na_Text)
' build the query
strQuery = "SELECT * FROM " & CLASS_PAGE_FILE_SETTING
' execute the query
Set objEnumerator = objService.ExecQuery(strQuery, "WQL", 0, null)
' check for any errors
If Err.Number Then
Err.Clear
WScript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
' If no.of pagefile instances are 0 (zero)
If (objEnumerator.Count = 0) Then
WScript.Echo(L_NoPageFiles_Message)
WScript.Quit(EXIT_UNEXPECTED)
End If
ReDim arrFinalResultsDrives(0)
ReDim arrFinalResultsSummary(0)
WScript.Echo("") ' Blank Line
' Loop through all the instances for the first report
For each objInstance in objEnumerator
If NOT IsEmpty(objInstance.Name) Then
strDriveName = Mid(objInstance.Name,1,2)
End If
' check if it is a valid physical drive
If IsValidPhysicalDrive(objService,strDriveName) Then
If IsEmpty(objInstance.Name) Then
arrResultsDrives(1) = L_Na_Text
Else
strDriveName = Mid(objInstance.Name,1,2)
arrResultsDrives(1) = UCase(strDriveName)
End If
' to get the data from Win32_PageFileUsage
Set objUsageInstance = objService.Get(CLASS_PAGE_FILE_USAGE & "='" & objInstance.Name & "'")
' to get the current size
If Len(objUsageInstance.AllocatedBaseSize) = 0 Then
arrResultsDrives(6) = L_Na_Text
Else
arrResultsDrives(6) = objUsageInstance.AllocatedBaseSize & MEGA_BYTES
intTotSize = intTotSize + objUsageInstance.AllocatedBaseSize
End If
' to get the data from Win32_LogicalDisk
Set objDiskDriveInstance = objService.Get(CLASS_LOGICAL_DISK & "='" & strDriveName & "'")
If Len(objDiskDriveInstance.VolumeName) = 0 Then
arrResultsDrives(2) = L_Na_Text
Else
arrResultsDrives(2) = objDiskDriveInstance.VolumeName
End If
If Len(objDiskDriveInstance.SystemName) = 0 Then
arrResultsDrives(0) = L_Na_Text
Else
arrResultsDrives(0) = objDiskDriveInstance.SystemName
arrResultsSummary(0) = objDiskDriveInstance.SystemName
End If
If (objDiskDriveInstance.FreeSpace) Then
arrResultsDrives(7) = Int(objDiskDriveInstance.FreeSpace/CONVERSION_FACTOR) + Int(objUsageInstance.AllocatedBaseSize) &_
MEGA_BYTES
Else
arrResultsDrives(7) = L_Na_Text
End If
If IsEmpty(objInstance.Name) Then
arrResultsDrives(3) = L_Na_Text
Else
arrResultsDrives(3) = objInstance.Name
End If
If objInstance.InitialSize Then
arrResultsDrives(4) = objInstance.InitialSize & MEGA_BYTES
Else
arrResultsDrives(4) = L_Na_Text
End If
If objInstance.MaximumSize Then
arrResultsDrives(5) = objInstance.MaximumSize & MEGA_BYTES
Else
arrResultsDrives(5) = L_Na_Text
End If
arrFinalResultsDrives(0) = arrResultsDrives
Call component.showResults(arrHeaderDrives, arrFinalResultsDrives, arrMaxLengthDrives, _
strFormat, blnPrintHeaderDrives, arrblnNoDisplayDrives)
blnPrintHeaderDrives = FALSE
End If
Next
WScript.Echo("")
' Display the summary report
arrResultsSummary(1) = INITIAL_SIZE_LB & MEGA_BYTES
Set objMemSizeInstance = objService.Get(CLASS_COMPUTER_SYSTEM & "='" & arrResultsDrives(0) & "'")
If objMemSizeInstance.TotalPhysicalMemory Then
intRecommendedSize = Int(Int(objMemSizeInstance.TotalPhysicalMemory/CONVERSION_FACTOR)* SIZE_FACTOR)
arrResultsSummary(2) = intRecommendedSize & MEGA_BYTES
Else
arrResultsSummary(2) = L_Na_Text
End If
arrResultsSummary(3) = intTotSize & MEGA_BYTES
arrFinalResultsSummary(0) = arrResultsSummary
Call component.showResults(arrHeaderSummary, arrFinalResultsSummary, arrMaxLengthSummary, strFormat, _
blnPrintHeaderSummary,arrblnNoDisplaySummary)
blnPrintHeaderSummary = FALSE
End Sub
'******************************************************************************
'* Function: IsValidPhysicalDrive
'*
'* Purpose: To check if the specified drive is a valid physical drive.
'* This check is done only for Win2K builds and NOT for Whistler Builds.
'*
'* Input:
'* [in] objServiceParam service object to maintain wmi connection.
'* [in] strDriveName drive name whose validity has to be checked.
'*
'* Output: Returns TRUE or FALSE
'* TRUE - when the drive is a valid physical drive.
'* FALSE - when the drive is not a valid physical drive.
'*
'******************************************************************************
Private Function IsValidPhysicalDrive ( ByVal objServiceParam, _
ByVal strDriveName )
ON ERROR RESUME NEXT
Err.Clear
CONST WIN2K_MAJOR_VERSION = 5000
CONST WINXP_MAJOR_VERSION = 5001
Dim strQuery ' to store the query to be executed
Dim objEnum ' collection object
Dim objInstance ' instance object
Dim strValidDrives ' to store all valid physical drives
Dim strVersion ' to store the OS version
Dim arrVersionElements ' to store the OS version elements
Dim CurrentMajorVersion ' the major version number
strValidDrives = ""
' by default set it to true
IsValidPhysicalDrive = TRUE
strquery = "Select * From " & CLASS_OPERATING_SYSTEM
set objEnum = objServiceParam.ExecQuery(strQuery,"WQL",48,null)
For each objInstance in objEnum
strVersion= objInstance.Version
Next
' OS Version : 5.1.xxxx(Whistler), 5.0.xxxx(Win2K)
arrVersionElements = split(strVersion,".")
' converting to major version
CurrentMajorVersion = arrVersionElements(0) * 1000 + arrVersionElements(1)
' Determine the OS Type
' If the OS is Whistler, then NO NEED to validate.
' If the OS is Win2K, then validate the drive name.
If CInt(CurrentMajorVersion) < CInt(WINXP_MAJOR_VERSION) Then
strQuery = "Select * From " & CLASS_PERFDISK_PHYSICAL_DISK
Set objEnum = objServiceParam.ExecQuery(strQuery, "WQL", 0, null)
For each objInstance in objEnum
' get all the instance except the last one
If (objInstance.Name <> "_Total") Then
strValidDrives = strValidDrives & " " & objInstance.Name
End If
Next
' check if the specified drive is present in the list of valid physical drives
If Instr(strValidDrives, UCase(strDriveName)) = 0 Then
IsValidPhysicalDrive = FALSE
End If
End If
End Function
'******************************************************************************
'* Function: getFreeSpaceOnDisk
'*
'* Purpose: To get the Free Space for the Specified Disk
'*
'* Input:
'* [in] strDriveName drive name whose free space is needed
'* [in] objServiceParam service object to maintain wmi connection
'*
'* Output: Returns the free space (in MB) on the specified disk.
'*
'******************************************************************************
Private Function getFreeSpaceOnDisk(ByVal strDriveName, ByVal objServiceParam)
ON ERROR RESUME NEXT
Err.Clear
Dim objValidDiskInst
Set objValidDiskInst = objServiceParam.Get(CLASS_LOGICAL_DISK & "='" & strDriveName & "'")
If Err.Number Then
Err.Clear
WScript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
getFreeSpaceOnDisk = Int(objValidDiskInst.FreeSpace/CONVERSION_FACTOR)
End Function
'******************************************************************************
'* Function: getCurrentPageFileSize
'*
'* Purpose: To get the current pagefile size on the specified drive
'*
'* Input:
'* [in] objService wbem service object
'* [in] objInstance instance of win32_pagefilesetting
'*
'* Output: current pagefile size
'*
'******************************************************************************
Private Function getCurrentPageFileSize(ByVal objService, ByVal objInstance)
ON ERROR RESUME NEXT
Err.Clear
Dim objUsageInstance
' get the data from Win32_PageFileUsage
Set objUsageInstance = objService.Get(CLASS_PAGE_FILE_USAGE & "='" & objInstance.Name & "'")
' return the current size ( allocated base size )
getCurrentPageFileSize = objUsageInstance.AllocatedBaseSize
End Function
'******************************************************************************
'* Function: GetDiskSize
'*
'* Purpose: To get the disk size for the specified drive
'*
'* Input:
'* [in] strDriveName drive name whose free space is needed
'* [in] objServiceParam service object to maintain wmi connection
'*
'* Output: Returns the total disk size in MB.
'*
'******************************************************************************
Private Function GetDiskSize(ByVal strDriveName, ByVal objServiceParam)
ON ERROR RESUME NEXT
Err.Clear
Dim objValidDiskInst ' object to store valid disk name
Set objValidDiskInst = objServiceParam.Get(CLASS_LOGICAL_DISK & "='" & strDriveName & "'")
If Err.Number Then
Err.Clear
WScript.Echo(L_UnableToRetrieveInfo_ErrorMessage)
WScript.Quit(EXIT_QUERY_FAIL)
End If
GetDiskSize = Int(objValidDiskInst.Size / CONVERSION_FACTOR)
End Function
'******************************************************************************
'* Function: GetPhysicalMemorySize
'*
'* Purpose: To get the physical memory size.
'*
'* Input:
'* [in] strHostName host name to connect to
'* [in] objServiceParam service object to maintain wmi connection
'*
'* Output: Returns the physical memory size in MB.
'*
'******************************************************************************
Private Function GetPhysicalMemorySize( ByVal strHostName, ByVal objServiceParam )
ON ERROR RESUME NEXT
Err.Clear
Dim objMemSizeInstance ' to store memory size
Dim intReturnValue ' to store return value
Set objMemSizeInstance = objServiceParam.Get(CLASS_COMPUTER_SYSTEM & "='" & strHostName & "'")
If Err.Number Then
Err.Clear
WScript.Echo L_UnableToRetrieveInfo_ErrorMessage
WScript.Quit EXIT_QUERY_FAIL
End If
If objMemSizeInstance.TotalPhysicalMemory Then
intReturnValue = Int(objMemSizeInstance.TotalPhysicalMemory/CONVERSION_FACTOR)
GetPhysicalMemorySize = intReturnValue
End If
End Function
'******************************************************************************
'* Function: getMaxSizeUB
'*
'* Purpose: To get the allowed upper bound for maximum size
'*
'* Input:
'* [in] objServiceParam service object to maintain wmi connection
'*
'* Output: Returns the upper bound for maximum size
'*
'******************************************************************************
Private Function getMaxSizeUB(objServiceParam)
ON ERROR RESUME NEXT
Err.Clear
CONST PROCESSOR_X86_BASED = "X86"
CONST PROCESSOR_IA64_BASED = "IA64"
Dim objInstance ' object instance
Dim intReturnValue ' to store return value
Dim strProcessorType ' to store the processor type
Dim strQuery ' to store the query
Dim objEnum ' collection of objects
getMaxSizeUB = 0
strQuery = "Select * From " & CLASS_COMPUTER_SYSTEM
Set objEnum = objServiceParam.ExecQuery(strQuery,"WQL",48,null)
If Err.Number Then
Err.Clear
WScript.Echo L_UnableToRetrieveInfo_ErrorMessage
WScript.Quit EXIT_QUERY_FAIL
End If
' The following code will handle only single processor environment
For each objInstance in objEnum
strProcessorType = objInstance.SystemType
Next
' check if its a 32-bit processor
If InStr( UCase(strProcessorType),PROCESSOR_X86_BASED ) > 0 Then
getMaxSizeUB = 4096
End If
' check if its a 64-bit processor
If Instr( UCase(strProcessorType),PROCESSOR_IA64_BASED ) > 0 Then
getMaxSizeUB = 33554432
End If
End Function
'******************************************************************************
'* Function: GetCrashDumpSetting
'*
'* Purpose: To get the Crash Dump Settings for the machine specified
'*
'* Input:
'* [in] strUserNameParam user name to connect to the machine
'* [in] strPasswordParam password for the user
'* [in] strMachineParam machine to get crash dump settings for
'*
'* Output: Returns the current crash dump setting value [ 0,1,2,3 ]
'* 0 - None
'* 1 - Complete Memory Dump
'* 2 - Kernel Memory Dump
'* 3 - Small Memory Dump
'*
'******************************************************************************
Private Function GetCrashDumpSetting( ByVal strUserNameParam, _
ByVal strPasswordParam, _
ByVal strMachineParam )
ON ERROR RESUME NEXT
Err.Clear
CONST CONST_NAMESPACE_DEFAULT = "root\default" ' name space to connect to
CONST CONST_HKEY_LOCAL_MACHINE = 2147483650 ' registry value for HKEY_LOCAL_MACHINE
CONST CONST_KEY_VALUE_NAME = "CrashDumpEnabled" ' value name to be retrieved
CONST CONST_STD_REGISTRY_PROVIDER = "StdRegProv" ' standard registry provider
' the Sub Key Name
CONST CONST_CRASH_DUMP_REGKEY = "SYSTEM\CurrentControlSet\Control\CrashControl"
Dim objInstance ' to store the object instance
Dim objService ' service object
Dim intCrashDumpValue ' to store the crash dump setting value
Dim intReturnVal ' to store return value
' connect to the name space
If NOT component.wmiConnect(CONST_NAMESPACE_DEFAULT , _
strUserNameParam , _
strPasswordParam , _
strMachineParam , _
blnLocalConnection , _
objService ) Then
WScript.Echo(L_HintCheckConnection_Message)
WScript.Quit(EXIT_METHOD_FAIL)
End If
' get the instance of the Standard Registry Provider
Set objInstance = objService.Get(CONST_STD_REGISTRY_PROVIDER)
' get the key value for from the registry
intReturnVal = objInstance.GetDWORDValue( CONST_HKEY_LOCAL_MACHINE, _
CONST_CRASH_DUMP_REGKEY, _
CONST_KEY_VALUE_NAME, _
intCrashDumpValue )
' check if any error has occured
If Err.Number <> 0 Then
Err.Clear
WScript.Echo(L_FailCreateObject_ErrorMessage)
WScript.Quit(EXIT_INVALID_PARAM)
End If
' check for the return value after registry is accessed.
If intReturnVal = 0 Then
GetCrashDumpSetting = CInt(intCrashDumpValue)
Else
WScript.Echo(L_FailCreateObject_ErrorMessage)
WScript.Quit(EXIT_INVALID_PARAM)
End If
End Function
' Function used to get the reply in y/n from the user
'******************************************************************************
'* Function: getReply
'*
'* Purpose: To get reply from the user
'*
'* Input: None
'*
'* Output: Prompts for a warning message and accepts the user's choice [y/n]
'*
'******************************************************************************
Private Function getReply()
ON ERROR RESUME NEXT
Err.Clear
Dim objStdIn ' to store value from standard input
Dim strReply ' to store the user reply
WScript.Echo(L_PromptForContinueAnyWay_Message)
Set objStdIn = WScript.StdIn
If Err.Number Then
Err.Clear
WScript.Echo(L_FailCreateObject_ErrorMessage)
WScript.Quit(EXIT_INVALID_PARAM)
End If
strReply = objStdIn.ReadLine()
getReply = Trim(strReply)
End Function
'******************************************************************************
'* Function: isCrashDumpValueSet
'*
'* Purpose: To check if the crash dump value is set
'*
'* Input:
'* [in] intCrashDumpParam crash dump setting value
'* [in] intIntSizeParam initial size of the pagefile
'* [in] intMemSizeParam physical memory size
'* [in] strVolume drive/volume name
'*
'* Output: Returns TRUE or FALSE
'*
'******************************************************************************
Private Function isCrashDumpValueSet( ByVal intCrashDumpParam,_
ByVal intIntSizeParam, _
ByVal intMemSizeParam, _
ByVal strVolume )
ON ERROR RESUME NEXT
Err.Clear
' Constants for Crash Dump Settings
CONST NO_MEMORY_DUMP = 0
CONST COMPLETE_MEMORY_DUMP = 1
CONST KERNEL_MEMORY_DUMP = 2
CONST SMALL_MEMORY_DUMP = 3
Dim strReply ' to store user reply
Dim intSizeValue ' to store the size value used for comparison
' default value is NO [n]
strReply = L_UserReplyNo_Text
Select Case CInt(intCrashDumpParam)
Case COMPLETE_MEMORY_DUMP
If CInt(intIntSizeParam) < CInt(intMemSizeParam) Then
component.VBPrintf CrashDumpSettingWarningMessage, Array(UCase(strVolume),CInt(intMemSizeParam) & MEGA_BYTES)
' Ask for choice until a yes[y] or no[n] is given
Do
strReply = getReply()
If Trim(LCase(strReply)) = L_UserReplyYes_Text Then
isCrashDumpValueSet = TRUE
ElseIf Trim(LCase(strReply)) = L_UserReplyNo_Text Then
isCrashDumpValueSet = FALSE
Else
WScript.Echo(L_InvalidUserReply_ErrorMessage)
End If
Loop Until (Trim(LCase(strReply)) = L_UserReplyYes_Text OR Trim(LCase(strReply)) = L_UserReplyNo_Text)
Else
isCrashDumpValueSet = TRUE
End If
Case KERNEL_MEMORY_DUMP
' check if RAM size is less than or equal to 128 MB
If CInt(intMemSizeParam) <= 128 Then
' assign size value to be checked to 50 MB
intSizeValue = 50
Else
' check if RAM size is less than or equal to 4 GB
If CInt(intMemSizeParam) <= 4096 Then
' assign size value to be checked to 200 MB
intSizeValue = 200
Else
' check if RAM size is less than or equal to 8 GB
If CInt(intMemSizeParam) <= 8192 Then
' assign size value to be checked to 400 MB
intSizeValue = 400
Else
' assign size value to be checked to 800 MB
intSizeValue = 800
End If
End If
End If
If CInt(intIntSizeParam) < CInt(intSizeValue) Then
component.VBPrintf CrashDumpSettingWarningMessage, Array(UCase(strVolume),intSizeValue & MEGA_BYTES)
' Ask for choice until a yes[y] or no[n] is given
Do
strReply = getReply()
If Trim(LCase(strReply)) = L_UserReplyYes_Text Then
isCrashDumpValueSet = TRUE
ElseIf Trim(LCase(strReply)) = L_UserReplyNo_Text Then
isCrashDumpValueSet = FALSE
Else
WScript.Echo(L_InvalidUserReply_ErrorMessage)
End If
Loop Until (Trim(LCase(strReply)) = L_UserReplyYes_Text OR Trim(LCase(strReply)) = L_UserReplyNo_Text)
Else
isCrashDumpValueSet = TRUE
End If
Case SMALL_MEMORY_DUMP
' initial size should not be less than 64 KB ( less than or equal to 0 MB )
If CInt(intIntSizeParam) <= 0 Then
component.VBPrintf CrashDumpSettingWarningMessage, Array(UCase(strVolume),"64 KB")
' Ask for choice until a yes[y] or no[n] is given
Do
strReply = getReply()
If Trim(LCase(strReply)) = L_UserReplyYes_Text Then
isCrashDumpValueSet = TRUE
ElseIf Trim(LCase(strReply)) = L_UserReplyNo_Text Then
isCrashDumpValueSet = FALSE
Else
WScript.Echo(L_InvalidUserReply_ErrorMessage)
End If
Loop Until (Trim(LCase(strReply)) = L_UserReplyYes_Text OR Trim(LCase(strReply)) = L_UserReplyNo_Text)
Else
isCrashDumpValueSet = TRUE
End If
Case NO_MEMORY_DUMP
' Crash Dump values 0 has no problem
isCrashDumpValueSet = TRUE
End Select
End Function
'******************************************************************************
'* Sub: typeMessage
'*
'* Purpose: To print the type usage messages relevent to the main option
'* selected.
'*
'* Input: The main option selected.
'*
'* Output: Prints "type..usage" messages for the main option selected.
'*
'******************************************************************************
Sub typeMessage(ByVal intMainOption)
ON ERROR RESUME NEXT
Err.Clear
Select Case CInt(intMainOption)
Case CONST_CHANGE_OPTION
component.VBPrintf L_TypeChangeUsage_Message,Array(UCase(WScript.ScriptName))
Case CONST_CREATE_OPTION
component.VBPrintf L_TypeCreateUsage_Message,Array(UCase(WScript.ScriptName))
Case CONST_DELETE_OPTION
component.VBPrintf L_TypeDeleteUsage_Message,Array(UCase(WScript.ScriptName))
Case CONST_QUERY_OPTION
component.VBPrintf L_TypeQueryUsage_Message,Array(UCase(WScript.ScriptName))
Case Else
component.VBPrintf L_TypeUsage_Message,Array(UCase(WScript.ScriptName))
End Select
End Sub
'******************************************************************************
'* Sub: ShowUsage
'*
'* Purpose: Shows the correct usage to the user.
'*
'* Input: None
'*
'* Output: Help messages are displayed on screen.
'*
'******************************************************************************
Sub ShowUsage()
WScript.Echo vbCr ' Line 1
WScript.Echo( L_ShowUsageLine02_Text ) ' Line 2
WScript.Echo vbCr ' Line 3
WScript.Echo( L_UsageDescription_Text ) ' Line 4
WScript.Echo( L_ShowUsageLine05_Text ) ' Line 5
WScript.Echo( L_ShowUsageLine06_Text ) ' Line 6
WScript.Echo vbCr ' Line 7
WScript.Echo( L_ShowUsageLine08_Text ) ' Line 8
WScript.Echo( L_ShowUsageLine09_Text ) ' Line 9
WScript.Echo( L_ShowUsageLine10_Text ) ' Line 10
WScript.Echo vbCr ' Line 11
WScript.Echo( L_ShowUsageLine12_Text ) ' Line 12
WScript.Echo vbCr ' Line 13
WScript.Echo( L_ShowUsageLine14_Text ) ' Line 14
WScript.Echo vbCr ' Line 15
WScript.Echo( L_ShowUsageLine16_Text ) ' Line 16
WScript.Echo( L_ShowUsageLine17_Text ) ' Line 17
WScript.Echo vbCr ' Line 18
WScript.Echo( L_ShowUsageLine19_Text ) ' Line 19
WScript.Echo( L_ShowUsageLine20_Text ) ' Line 20
WScript.Echo( L_ShowUsageLine21_Text ) ' Line 21
WScript.Echo( L_ShowUsageLine22_Text ) ' Line 22
WScript.Echo( L_ShowUsageLine23_Text ) ' Line 23
WScript.Echo( L_ShowUsageLine24_Text ) ' Line 24
WScript.Echo( L_ShowUsageLine25_Text ) ' Line 25
End Sub
'******************************************************************************
'* Sub: ShowChangeUsage
'*
'* Purpose: Shows the correct usage to the user.
'*
'* Input: None
'*
'* Output: Help messages for the /Change o ption are displayed on screen.
'*
'******************************************************************************
Sub ShowChangeUsage()
WScript.Echo vbCr ' Line 1
WScript.Echo( L_ShowChangeUsageLine02_Text ) ' Line 2
WScript.Echo( L_ShowChangeUsageLine03_Text ) ' Line 3
WScript.Echo( L_ShowChangeUsageLine04_Text ) ' Line 4
WScript.Echo vbCr ' Line 5
WScript.Echo( L_UsageDescription_Text ) ' Line 6
WScript.Echo( L_ShowChangeUsageLine07_Text ) ' Line 7
WScript.Echo vbCr ' Line 8
WScript.Echo( L_UsageParamList_Text ) ' Line 9
WScript.Echo( L_UsageMachineName_Text ) ' Line 10
WScript.Echo vbCr ' Line 11
WScript.Echo( L_UsageUserNameLine1_Text ) ' Line 12
WScript.Echo( L_UsageUserNameLine2_Text ) ' Line 13
WScript.Echo vbCr ' Line 14
WScript.Echo( L_UsagePasswordLine1_Text ) ' Line 15
WScript.Echo( L_UsagePasswordLine2_Text ) ' Line 16
WScript.Echo vbCr ' Line 17
WScript.Echo( L_ShowChangeUsageLine18_Text ) ' Line 18
WScript.Echo( L_ShowChangeUsageLine19_Text ) ' Line 19
WScript.Echo vbCr ' Line 20
WScript.Echo( L_ShowChangeUsageLine21_Text ) ' Line 21
WScript.Echo( L_ShowChangeUsageLine22_Text ) ' Line 22
WScript.Echo vbCr ' Line 23
WScript.Echo( L_ShowChangeUsageLine24_Text ) ' Line 24
WScript.Echo( L_ShowChangeUsageLine25_Text ) ' Line 25
WScript.Echo( L_ShowChangeUsageLine26_Text ) ' Line 26
WScript.Echo( L_ShowChangeUsageLine27_Text ) ' Line 27
WScript.Echo vbCr ' Line 28
WScript.Echo( L_UsageExamples_Text ) ' Line 29
WScript.Echo( L_ShowChangeUsageLine30_Text ) ' Line 30
WScript.Echo( L_ShowChangeUsageLine31_Text ) ' Line 31
WScript.Echo( L_ShowChangeUsageLine32_Text ) ' Line 32
WScript.Echo( L_ShowChangeUsageLine33_Text ) ' Line 33
WScript.Echo( L_ShowChangeUsageLine34_Text ) ' Line 34
WScript.Echo( L_ShowChangeUsageLine35_Text ) ' Line 35
End Sub
'******************************************************************************
'* Sub: ShowCreateUsage
'*
'* Purpose: Shows the correct usage to the user.
'*
'* Input: None
'*
'* Output: Help messages for the /Create option are displayed on screen.
'*
'******************************************************************************
Sub ShowCreateUsage()
WScript.Echo vbCr ' Line 1
WScript.Echo( L_ShowCreateUsageLine02_Text ) ' Line 2
WScript.Echo( L_ShowCreateUsageLine03_Text ) ' Line 3
WScript.Echo( L_ShowCreateUsageLine04_Text ) ' Line 4
WScript.Echo vbCr ' Line 5
WScript.Echo( L_UsageDescription_Text ) ' Line 6
WScript.Echo( L_ShowCreateUsageLine07_Text ) ' Line 7
WScript.Echo vbCr ' Line 8
WScript.Echo( L_UsageParamList_Text ) ' Line 9
WScript.Echo( L_UsageMachineName_Text ) ' Line 10
WScript.Echo vbCr ' Line 11
WScript.Echo( L_UsageUserNameLine1_Text ) ' Line 12
WScript.Echo( L_UsageUserNameLine2_Text ) ' Line 13
WScript.Echo vbCr ' Line 14
WScript.Echo( L_UsagePasswordLine1_Text ) ' Line 15
WScript.Echo( L_UsagePasswordLine2_Text ) ' Line 16
WScript.Echo vbCr ' Line 17
WScript.Echo( L_ShowCreateUsageLine18_Text ) ' Line 18
WScript.Echo( L_ShowCreateUsageLine19_Text ) ' Line 19
WScript.Echo vbCr ' Line 20
WScript.Echo( L_ShowCreateUsageLine21_Text ) ' Line 21
WScript.Echo( L_ShowCreateUsageLine22_Text ) ' Line 22
WScript.Echo vbCr ' Line 23
WScript.Echo( L_ShowCreateUsageLine24_Text ) ' Line 24
WScript.Echo( L_ShowCreateUsageLine25_Text ) ' Line 25
WScript.Echo( L_ShowCreateUsageLine26_Text ) ' Line 26
WScript.Echo( L_ShowCreateUsageLine27_Text ) ' Line 27
WScript.Echo vbCr ' Line 28
WScript.Echo( L_UsageExamples_Text ) ' Line 29
WScript.Echo( L_ShowCreateUsageLine30_Text ) ' Line 30
WScript.Echo( L_ShowCreateUsageLine31_Text ) ' Line 31
WScript.Echo( L_ShowCreateUsageLine32_Text ) ' Line 32
WScript.Echo( L_ShowCreateUsageLine33_Text ) ' Line 33
WScript.Echo( L_ShowCreateUsageLine34_Text ) ' Line 34
WScript.Echo( L_ShowCreateUsageLine35_Text ) ' Line 35
End Sub
'******************************************************************************
'* Sub: ShowDeleteUsage
'*
'* Purpose: Shows the correct usage to the user.
'*
'* Input: None
'*
'* Output: Help messages for the /Delete option are displayed on screen.
'*
'******************************************************************************
Sub ShowDeleteUsage()
WScript.Echo vbCr ' Line 1
WScript.Echo( L_ShowDeleteUsageLine02_Text ) ' Line 2
WScript.Echo( L_ShowDeleteUsageLine03_Text ) ' Line 3
WScript.Echo vbCr ' Line 4
WScript.Echo( L_UsageDescription_Text ) ' Line 5
WScript.Echo( L_ShowDeleteUsageLine06_Text ) ' Line 6
WScript.Echo vbCr ' Line 7
WScript.Echo( L_UsageParamList_Text ) ' Line 8
WScript.Echo( L_UsageMachineName_Text ) ' Line 9
WScript.Echo vbCr ' Line 10
WScript.Echo( L_UsageUserNameLine1_Text ) ' Line 11
WScript.Echo( L_UsageUserNameLine2_Text ) ' Line 12
WScript.Echo vbCr ' Line 13
WScript.Echo( L_UsagePasswordLine1_Text ) ' Line 14
WScript.Echo( L_UsagePasswordLine2_Text ) ' Line 15
WScript.Echo vbCr ' Line 16
WScript.Echo( L_ShowDeleteUsageLine17_Text ) ' Line 17
WScript.Echo( L_ShowDeleteUsageLine18_Text ) ' Line 18
WScript.Echo( L_ShowDeleteUsageLine19_Text ) ' Line 19
WScript.Echo vbCr ' Line 20
WScript.Echo( L_UsageExamples_Text ) ' Line 21
WScript.Echo( L_ShowDeleteUsageLine22_Text ) ' Line 22
WScript.Echo( L_ShowDeleteUsageLine23_Text ) ' Line 23
WScript.Echo( L_ShowDeleteUsageLine24_Text ) ' Line 24
WScript.Echo( L_ShowDeleteUsageLine25_Text ) ' Line 25
End Sub
'******************************************************************************
'* Sub: ShowQueryUsage
'*
'* Purpose: Shows the correct usage to the user.
'*
'* Input: None
'*
'* Output: Help messages for the /Query option are displayed on screen.
'*
'******************************************************************************
Sub ShowQueryUsage()
WScript.Echo vbCr ' Line 1
WScript.Echo( L_ShowQueryUsageLine02_Text ) ' Line 2
WScript.Echo( L_ShowQueryUsageLine03_Text ) ' Line 3
WScript.Echo vbCr ' Line 4
WScript.Echo( L_UsageDescription_Text ) ' Line 5
WScript.Echo( L_ShowQueryUsageLine06_Text ) ' Line 6
WScript.Echo vbCr ' Line 7
WScript.Echo( L_UsageParamList_Text ) ' Line 8
WScript.Echo( L_UsageMachineName_Text ) ' Line 9
WScript.Echo vbCr ' Line 10
WScript.Echo( L_UsageUserNameLine1_Text ) ' Line 11
WScript.Echo( L_UsageUserNameLine2_Text ) ' Line 12
WScript.Echo vbCr ' Line 13
WScript.Echo( L_UsagePasswordLine1_Text ) ' Line 14
WScript.Echo( L_UsagePasswordLine2_Text ) ' Line 15
WScript.Echo vbCr ' Line 16
WScript.Echo( L_ShowQueryUsageLine17_Text ) ' Line 17
WScript.Echo( L_ShowQueryUsageLine18_Text ) ' Line 18
WScript.Echo( L_ShowQueryUsageLine19_Text ) ' Line 19
WScript.Echo vbCr ' Line 20
WScript.Echo( L_UsageExamples_Text ) ' Line 21
WScript.Echo( L_ShowQueryUsageLine22_Text ) ' Line 22
WScript.Echo( L_ShowQueryUsageLine23_Text ) ' Line 23
WScript.Echo( L_ShowQueryUsageLine24_Text ) ' Line 24
WScript.Echo( L_ShowQueryUsageLine25_Text ) ' Line 25
WScript.Echo( L_ShowQueryUsageLine26_Text ) ' Line 26
WScript.Echo( L_ShowQueryUsageLine27_Text ) ' Line 27
End Sub
'+----------------------------------------------------------------------------+
'| End of the Script |
'+----------------------------------------------------------------------------+