able/windows-nt
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
windows-nt/Source/XPSP1/NT/base/ntsetup/inf/beta/oemnadap.inf

1536 lines
43 KiB
INI
Raw Normal View History

Add source files
2020-09-26 03:20:57 -05:00
;***********************************************************************
;
; OEMNADAM.INF
;
; PCNET Family network card and driver SETUP INF file.
;
; History:
;***********************************************************************
;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with. The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
; Types specific to networking:
;
; NetAdapter, a netcard / adapter combination or just a netcard
; NetDriver, just a netcard driver
; NetTransport, a complete NDIS-compliant TDI transport stack
; NetService, an NT networking service
; NetWork, a complete network ensemble.
; NetProvider a complete network which supports NT MPR protocol
;-----------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA and EISA
;-----------------------------------------------------------------------
[PlatformsSupported]
ISA
EISA
PCI
;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names. These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------
[Options]
AMDPCI
;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************
[FileConstants]
GenericInfVersion = " v3.11"
GenericSysName = "amdpcn.sys"
GenericName = "AMDPCN"
;
; File names, etc.
;
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
;
; EventLog Message File
;
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
; Product Info
;
Manufacturer = "Microsoft"
ProductMajorVersion = "4"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Software
;
ProductSoftwareName = "AMDPCN"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "pcntn3Sys ndisDriver pcntn3Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """pcntn3Sys"" yes no container"
NetRuleSoftwareClass = {"pcntn3Driver basic"}
NetRuleSoftwareBindable = {"pcntn3Driver pcntn3Adapter non exclusive 100"}
;
; Hardware
;
ProductHardwareName = "AMDPCN"
NetRuleHardwareType = "pcntn3 pcntn3Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"pcntn3Adapter basic"}
ProductOpSupport = 134 ; 0x0086 ; Display,Removable,Properties,Not Updatable
;
; Registry Key
;
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
;
; Program flow control variables.
;
from = ""
to = ""
;
; Return codes; Exit_Code is set to one of these
;
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
;
;
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
;
; Check if the platforms requested is supported
;
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;------------------------------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
;
; Set default values for
;
set Status = STATUS_FAILED
;
; extract parameters
;
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
;
; Assume all is well.
;
set CommonStatus = STATUS_SUCCESSFUL
EndWait
;
; Set up the operation-mode-based variables and gaily welcome
; the user. If the "install mode" variable is improperly set,
; assume this is a new installation.
;
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
; set ActivateDetection = TRUE
set StartLabel = configureadapter
;
; You cannot config the software component
;
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the PCNet family driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
; set ActivateDetection = TRUE
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
; set the default values
; IRQ Level = 3
; IRQ Level = Auto_Scan
set IRQValue = *($(IRQList), 9)
; IOBase Address = 0x300
; IOBase Address = Auto_Scan
set IOBaseAddrValue = *($(IOBaseAddrList), 17)
; DMAChannel = 5
; DMAChannel = Auto_Scan
set DMAChannelValue = *($(DMAChannelList), 5)
set RadioIn = {4}
set BusScanValue = "ALL"
set LED0Value = *($(LEDList), 1)
set LED1Value = *($(LEDList), 1)
set LED2Value = *($(LEDList), 1)
set LED3Value = *($(LEDList), 1)
set TPValue = 1
set FullDuplexValue = *($(FullDuplexList), 4)
set BusTimerValue = *($(BusTimerList), 10)
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
set IsISA = 0
set Vendor = 4130
set CardID = 8192
Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CardID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set AdapterList = $($R0)
set NewAdapterList = {}
set NumNew = 0
ForListDo $(AdapterList)
; make sure that all the adapters are new
set BusNumber = *($($),1)
set SlotNum = *($($),2)
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNumber), +
$(SlotNum), $(GenericPCIAdapterName), $(ProductHardwareName)
ifstr(i) $($R1) != "YES"
set-add NumNew = $(NumNew),1
ifstr(i) $(NewAdapterList) == {}
set NewAdapterList = {$($)}
else
set NewAdapterList = >($(NewAdapterList),$($))
endif
endif
EndForListDo
set AdapterList = $(NewAdapterList)
ifint $(NumNew) == 0
set AdapterList = {{0,0,0}}
set IsISA = 1
endif
debug-output $(AdapterList)
;
; First, check whether the same version of the software exists
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
;
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
;
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
;
; Cannot Install the same software again
;
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
;
; Add a new adapter card?
;
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
; If we're installing a second time, don't re-copy the help file
; !!!
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
endif
install "Install-Helpfile"
endif
endif
SetHelpFile "pcnet.hlp" 1 11
;
; dll load addition
;
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
install "Install-Dll"
goto adaptersetup
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
; Get the current values of all the parameters
;
configureadapter = +
SetHelpFile "pcnet.hlp" 1 11
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
;
; Get the other parameters; they're attached to the service parameters key
;
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values
;
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "BUS_TO_SCAN"
set BusScanValue = $(ValueData)
else-ifstr(i) $(ValueName) == "TP"
set TPValue = $(ValueData)
else-ifstr(i) $(ValueName) == "LED0"
set LED0Value = $(ValueData)
else-ifstr(i) $(ValueName) == "LED1"
set LED1Value = $(ValueData)
else-ifstr(i) $(ValueName) == "LED2"
set LED2Value = $(ValueData)
else-ifstr(i) $(ValueName) == "LED3"
set LED3Value = $(ValueData)
else-ifstr(i) $(ValueName) == "IOBaseAddress"
set IOBaseAddrValue = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValue = $(ValueData)
else-ifstr(i) $(ValueName) == "DMAChannel"
set DMAChannelValue = $(ValueData)
else-ifstr(i) $(ValueName) == "FDUP"
set FullDuplexValue = $(ValueData)
else-ifstr(i) $(ValueName) == "BUSTIMER"
set BusTimerValue = $(ValueData)
else-ifstr(i) $(ValueName) == "BusType"
set BusInterfaceType = $(ValueData)
ifint $(BusInterfaceType) == 5
set IsISA = 0
else
set IsISA = 1
endif
else-ifstr(i) $(ValueName) == "BusNumber"
set BusNumber = $(ValueData)
endif
EndForListDo
Ifint $(TPValue) == 0
Set CheckItemsIn = {"OFF"}
Else
Set CheckItemsIn = {"ON"}
Endif
; set the Radio Buttons depending on the bustype in the reg.
Ifstr $(BusScanValue) == "PNP"
Set RadioIn = {1}
Else-Ifstr $(BusScanValue) == "VESA"
Set RadioIn = {2}
Else-Ifstr $(BusScanValue) == "ISA"
Set RadioIn = {3}
Else-Ifstr $(BusScanValue) == "ALL"
Set RadioIn = {4}
Else-Ifstr $(BusScanValue) == ""
Set RadioIn = {4}
Endif
Debug-Output $(InfName)" TP is "$(TPValue)
;;;;;;;;; Not needed for PCI Adapters!!
ifint $(IsISA) == 1
; Isa
set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValue)))
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 2)
endif
Debug-Output $(InfName)" IRQ_Level is "$(IRQValue)
set DMAChannelValue = *($(DMAChannelList), ~($(DMAChannelValues),$(DMAChannelValue)))
ifstr(i) $(DMAChannelValue) == ""
set DMAChannelValue = *($(DMAChannelList), 2)
endif
Debug-Output $(InfName)" DMA is "$(DMAChannelValue)
set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrValue)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
endif
Debug-Output $(InfName)" I/o base is "$(IOBaseAddrValue)
endif
;;;;;;;;; End of Change!!
set LED0Value = *($(LEDList), ~($(LEDValues),$(LED0Value)))
ifstr(i) $(LED0Value) == ""
set LED0Value = *($(LEDList), 1)
endif
Debug-Output $(InfName)" LED0 is "$(LED0Value)
set LED1Value = *($(LEDList), ~($(LEDValues),$(LED1Value)))
ifstr(i) $(LED1Value) == ""
set LED1Value = *($(LEDList), 1)
endif
Debug-Output $(InfName)" LED1 is "$(LED1Value)
set LED2Value = *($(LEDList), ~($(LEDValues),$(LED2Value)))
ifstr(i) $(LED2Value) == ""
set LED2Value = *($(LEDList), 1)
endif
Debug-Output $(InfName)" LED2 is "$(LED0Value)
set LED3Value = *($(LEDList), ~($(LEDValues),$(LED3Value)))
ifstr(i) $(LED3Value) == ""
set LED3Value = *($(LEDList), 1)
endif
Debug-Output $(InfName)" LED3 is "$(LED3Value)
set FullDuplexValue = *($(FullDuplexList), ~($(FullDuplexValues),$(FullDuplexValue)))
ifstr(i) $(FullDuplexValue) == ""
set FullDuplexValue = *($(FullDuplexList), 1)
endif
Debug-Output $(InfName)" Full Duplex is "$(FullDuplexValue)
set BusTimerValue = *($(BusTimerList), ~($(BusTimerValues),$(BusTimerValue)))
ifstr(i) $(BusTimerValue) == ""
set BusTimerValue = *($(BusTimerList), 1)
endif
Debug-Output $(InfName)" Bus Timer is "$(BusTimerValue)
; Shell $(ParamInf) Param_SaveValues
; Set CurrParamSettings = $($R0)
;
; Put up the adapter configuration dialog if necessary.
;
; Note that $(CurrParamSettings) has the old known parameter values.
;
adaptersetup = +
; Shell "" DebugConfiguration "before displaying dialog"
Set from = adapteroptions
adapteroptions = +
LoadLibrary "x" $(!STF_CWDDIR)\$(DialogDllName) hLib
ifint $(IsISA) == 0
; pci
read-syms FileDependentDlgPCI$(!STF_LANGUAGE)
Debug-Output $(InfName)" TP is "$(TPValue)
Debug-Output $(InfName)" LED0 is "$(LED0Value)
Debug-Output $(InfName)" LED1 is "$(LED1Value)
Debug-Output $(InfName)" LED2 is "$(LED2Value)
Debug-Output $(InfName)" LED3 is "$(LED3Value)
Debug-Output $(InfName)" Full Duplex is "$(FullDuplexValue)
Debug-Output $(InfName)" Bus Timer is "$(BusTimerValue)
ui start "Inputdlg" $(hLib)
else
; isa
debug-output "read the isa dialog"
read-syms FileDependentDlg$(!STF_LANGUAGE)
Debug-Output $(InfName)" Bus is "$(BusScanValue)
Debug-Output $(InfName)" TP is "$(TPValue)
Debug-Output $(InfName)" LED0 is "$(LED0Value)
Debug-Output $(InfName)" LED1 is "$(LED1Value)
Debug-Output $(InfName)" LED2 is "$(LED2Value)
Debug-Output $(InfName)" LED3 is "$(LED3Value)
Debug-Output $(InfName)" DMA is "$(DMAChannelValue)
Debug-Output $(InfName)" I/o base is "$(IOBaseAddrValue)
Debug-Output $(InfName)" Full Duplex is "$(FullDuplexValue)
Debug-Output $(InfName)" Bus Timer is "$(BusTimerValue)
ui start "InputDlg" $(hLib)
endif
set ExitButton = $(ButtonPressed)
Debug-Output " ButtonPressed "$(ButtonPressed)
debug-output $(DLGEVENT)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
ifint $(IsISA) == 1
set IOBaseAddrValue = $(Combo1Out)
set IRQValueValue = $(Combo2Out)
set DMAChannelValue = $(Combo3Out)
set FullDuplexValue = $(Combo4Out)
set BusTimerValue = $(Combo5Out)
set ExitButton = $(ButtonPressed)
set BusIndex = *($(RadioOut),1)
else
set FullDuplexValue = $(Combo1Out)
set BusTimerValue = $(Combo2Out)
set ExitButton = $(ButtonPressed)
set BusIndex = *($(RadioOut),1)
endif
Ifint $(BusIndex) == 1
Set BusScanValue = "PNP"
else-Ifint $(BusIndex) == 2
Set BusScanValue = "VESA"
else-Ifint $(BusIndex) == 3
Set BusScanValue = "ISA"
else-Ifint $(BusIndex) == 4
Set BusScanValue = "ALL"
Endif
Set Chk = *($(CheckItemsOut), 1)
Ifstr(i) $(Chk) == "ON"
Set TPValue = 1
Else
Set TPValue = 0
Endif
ui pop 1
; goto nextstep
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
;
; Unknow command
;
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
Debug-Output " Combo list out "$(ComboListItemsOut)
;
; If installing, go create the necessary keys;
; if configuring, they're already open.
;
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
set BusNumberValue = 0
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
debug-output "before write registry"
set DMAChannelValue = *($(DMAChannelValues), ~($(DMAChannelList),$(DMAChannelValue)))
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueValue)))
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrValue)))
set LED0Value = *($(LEDValues), ~($(LEDList),$(LED0Value)))
set LED1Value = *($(LEDValues), ~($(LEDList),$(LED1Value)))
set LED2Value = *($(LEDValues), ~($(LEDList),$(LED2Value)))
set LED3Value = *($(LEDValues), ~($(LEDList),$(LED3Value)))
set FullDuplexValue = *($(FullDuplexValues), ~($(FullDuplexList),$(FullDuplexValue)))
set BusTimerValue = *($(BusTimerValues), ~($(BusTimerList),$(BusTimerValue)))
; Ifint $(TPValue) != 0
ifint $(IsISA) == 0
; PCI version
set NewValueList = {{FDUP, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
{BUSTIMER, $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+
{TP, $(NoTitle),$(!REG_VT_DWORD),$(TPValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
else
; ISA version
set NewValueList = {{BUS_TO_SCAN,$(NoTitle),$(!REG_VT_SZ),$(BusScanValue)},+
{FDUP, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
{BUSTIMER, $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+
{TP, $(NoTitle),$(!REG_VT_DWORD),$(TPValue)},+
{IOBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{DMAChannel, $(NoTitle),$(!REG_VT_DWORD),$(DMAChannelValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
endif
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
endif
endif
StartWait
;
; Add Software Component
;
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
;
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
debug-output $(AdapterList)
ForListDo $(AdapterList)
set BusNumber = *($($),1)
set DeviceNum = *($($),2)
set FunctionNum = *($($),3)
;
; Create the HARDWARE\Netcard region and its corresponding service
;
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
ifint $(IsISA) == 1
set HardwareDescription = $(GenericAdapterName)
set HardwareTitle = $(GenericAdapterName)
else
set HardwareDescription = $(GenericPCIAdapterName)
set HardwareTitle = $(GenericPCIAdapterName)
endif
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(HardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(HardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
;
; REQUIRED: $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
set BusNumberValue = 0
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
debug-output "before write registry"
set DMAChannelValue = *($(DMAChannelValues), ~($(DMAChannelList),$(DMAChannelValue)))
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueValue)))
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrValue)))
set LED0Value = *($(LEDValues), ~($(LEDList),$(LED0Value)))
set LED1Value = *($(LEDValues), ~($(LEDList),$(LED1Value)))
set LED2Value = *($(LEDValues), ~($(LEDList),$(LED2Value)))
set LED3Value = *($(LEDValues), ~($(LEDList),$(LED3Value)))
set FullDuplexValue = *($(FullDuplexValues), ~($(FullDuplexList),$(FullDuplexValue)))
set BusTimerValue = *($(BusTimerValues), ~($(BusTimerList),$(BusTimerValue)))
; Ifint $(TPValue) != 0
ifint $(IsISA) == 0
; PCI version
set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),5},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{LED0, $(NoTitle),$(!REG_VT_DWORD),$(LED0Value)},+
{LED1, $(NoTitle),$(!REG_VT_DWORD),$(LED1Value)},+
{LED2, $(NoTitle),$(!REG_VT_DWORD),$(LED2Value)},+
{LED3, $(NoTitle),$(!REG_VT_DWORD),$(LED3Value)},+
{FDUP, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
{BUSTIMER, $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+
{TP, $(NoTitle),$(!REG_VT_DWORD),$(TPValue)},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),536875042},+
{SlotNumber, $(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
else
; ISA version
set NewValueList = {{BUS_TO_SCAN,$(NoTitle),$(!REG_VT_SZ),$(BusScanValue)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{LED0, $(NoTitle),$(!REG_VT_DWORD),$(LED0Value)},+
{LED1, $(NoTitle),$(!REG_VT_DWORD),$(LED1Value)},+
{LED2, $(NoTitle),$(!REG_VT_DWORD),$(LED2Value)},+
{LED3, $(NoTitle),$(!REG_VT_DWORD),$(LED3Value)},+
{FDUP, $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
{BUSTIMER, $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+
{TP, $(NoTitle),$(!REG_VT_DWORD),$(TPValue)},+
{IOBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{DMAChannel, $(NoTitle),$(!REG_VT_DWORD),$(DMAChannelValue)},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
endif
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndForListDo
EndWait
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
LoadLibrary "x" $(!STF_CWDDIR)\ncpa.cpl NCPA_HANDLE
;set !NTN_ScUseRegistry = "YES"
OpenRegKey $(!REG_H_LOCAL) "" "Software\Microsoft\PCNTN3" $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
;
; remove the old one
;
; First remove software
DeleteRegTree $(KeyProduct) ""
;
; remove the driver
;
LibraryProcedure NCPA_RESULT $(NCPA_HANDLE), CPlSetup $(!STF_HWND), DELETESVC, "PCNTN3"
;
; Remove network card
;
set NetworkCardKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards"
OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardKeyName) $(MAXIMUM_ALLOWED) IE_KeyNetcards
ifstr(i) $(IE_KeyNetcards) != ""
EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
ForListDo $(IE_KeyNameList)
OpenRegKey $(IE_KeyNetcards) "" *($($),1) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ProductName", ProductNameInfo
set ProductName = *($(ProductNameInfo), 4)
Debug-Output " ProductName = "$(ProductName)
ifstr(i) $(ProductName) != "PCNTN3"
goto nextnetcard
endif
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
Debug-Output " ServiceName = "$(ServiceName)
OpenRegKey $(!REG_H_LOCAL) "" "System\CurrentControlSet\Services\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
DeleteRegTree $(ServiceKey) ""
DeleteRegTree $(NetworkCardKey) ""
endif
nextnetcard = +
EndForListDo
endif
;
; make sure amdpci does not exit
;
OpenRegKey $(!REG_H_LOCAL) "" "Software\Microsoft\AMDPCI" $(MAXIMUM_ALLOWED) KeyProduct2
ifstr $(KeyProduct2) == $(KeyNull)
LibraryProcedure NCPA_RESULT $(NCPA_HANDLE), CPlSetup $(!STF_HWND), STARTSVC, NetDetect
set !NTN_InstallMode = Install
Shell "" InstallOption $(!STF_LANGUAGE) "AMDPCI" $(SrcDir) "YES" "YES" "NO"
set !NTN_InstallMode = Update
else
;
; something wrong
;
endif
else
endif
FreeLibrary $(NCPA_HANDLE)
goto end
;
; End of Upgrade Software
;
;
; Escape hatches
;
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;
; warning display
;
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;
; non fatal error display
;
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
;
; Registry is broken
;
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
;
; Netcard detection failure
;
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
;
; fatal error display
;
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;
; Shelling error
;
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
;
; if OEM_ABANDON_ON == TRUE, then remove the registry entries
;
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMNADAM.INF"
Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQ_Level)
Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)
return
;***************************************************************
; INSTALL SECTIONS
;***************************************************************
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
;
; Add the files to the copy list
;
; BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
; the other INF files
;
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
;
; Copy files in the copy list
;
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;set STF_VERSION = "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
exit
[Install-Helpfile]
Debug-Output "At Install-Helpfile"
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;set STF_VERSION = "YES"
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
exit
[Install-Dll]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
exit
Reference in a new issue Copy permalink