able/windows-nt
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
windows-nt/Source/XPSP1/NT/drivers/net/irda/sigmatel/sys/hwio.c

1954 lines
51 KiB
C
Raw Normal View History

Add source files
2020-09-26 03:20:57 -05:00
/**************************************************************************************************************************
* HWIO.C SigmaTel STIR4200 hardware specific module (to access the registers)
**************************************************************************************************************************
* (C) Unpublished Copyright of Sigmatel, Inc. All Rights Reserved.
*
*
* Created: 04/06/2000
* Version 0.9
* Edited: 04/27/2000
* Version 0.92
* Edited: 05/12/2000
* Version 0.94
* Edited: 07/27/2000
* Version 1.01
* Edited: 08/22/2000
* Version 1.02
* Edited: 09/16/2000
* Version 1.03
* Edited: 09/25/2000
* Version 1.10
* Edited: 11/10/2000
* Version 1.12
* Edited: 01/16/2001
* Version 1.14
* Edited: 02/20/2001
* Version 1.15
*
**************************************************************************************************************************/
#define DOBREAKS // enable debug breaks
#include <ndis.h>
#include <ntdef.h>
#include <windef.h>
#include "stdarg.h"
#include "stdio.h"
#include "debug.h"
#include "usbdi.h"
#include "usbdlib.h"
#include "ircommon.h"
#include "irusb.h"
#include "irndis.h"
#include "stir4200.h"
/*****************************************************************************
*
* Function: St4200ResetFifo
*
* Synopsis: Reset the STIr4200 FIFO to clear several hangs
*
* Arguments: pDevice - pointer to current ir device object
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200ResetFifo(
IN PVOID pDevice
)
{
NTSTATUS Status;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
DEBUGMSG(DBG_INT_ERR, (" St4200ResetFifo: Issuing a FIFO reset()\n"));
#if !defined(FAST_WRITE_REGISTERS)
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_MODE_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200ResetFifo(): USB failure\n"));
goto done;
}
#endif
//
// Force a FIFO reset by clearing and setting again the RESET_OFF bit
//
pThisDev->StIrTranceiver.ModeReg &= (~STIR4200_MODE_RESET_OFF);
if( (Status = St4200WriteRegister(pThisDev, STIR4200_MODE_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200ResetFifo(): USB failure\n"));
goto done;
}
pThisDev->StIrTranceiver.ModeReg |= STIR4200_MODE_RESET_OFF;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_MODE_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200ResetFifo(): USB failure\n"));
goto done;
}
done:
return Status;
}
/*****************************************************************************
*
* Function: St4200DoubleResetFifo
*
* Synopsis: Reset the STIr4200 FIFO to clear several 4012 related hangs
*
* Arguments: pDevice - pointer to current ir device object
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200DoubleResetFifo(
IN PVOID pDevice
)
{
NTSTATUS Status;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
DEBUGMSG(DBG_INT_ERR, (" St4200DoubleResetFifo: Issuing a FIFO reset()\n"));
//
// Turn off the receiver to clear the pointers
//
if( (Status = St4200TurnOffReceiver( pThisDev ) ) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200DoubleResetFifo(): USB failure\n"));
goto done;
}
//
// Now clear the fifo logic
//
#if !defined(FAST_WRITE_REGISTERS)
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_STATUS_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200DoubleResetFifo(): USB failure\n"));
goto done;
}
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_STATUS_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200DoubleResetFifo(): USB failure\n"));
goto done;
}
#endif
pThisDev->StIrTranceiver.StatusReg |= STIR4200_STAT_FFCLR;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_STATUS_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200DoubleResetFifo(): USB failure\n"));
goto done;
}
//
// All back on
//
pThisDev->StIrTranceiver.StatusReg &= (~STIR4200_STAT_FFCLR);
if( (Status = St4200WriteRegister(pThisDev, STIR4200_STATUS_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200DoubleResetFifo(): USB failure\n"));
goto done;
}
if( (Status = St4200TurnOnReceiver( pThisDev ) ) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200DoubleResetFifo(): USB failure\n"));
goto done;
}
done:
return Status;
}
/*****************************************************************************
*
* Function: St4200SoftReset
*
* Synopsis: Soft reset of the STIr4200 modulator
*
* Arguments: pDevice - pointer to current ir device object
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200SoftReset(
IN PVOID pDevice
)
{
NTSTATUS Status;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
DEBUGMSG(DBG_INT_ERR, (" St4200SoftReset: Issuing a soft reset()\n"));
#if !defined(FAST_WRITE_REGISTERS)
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_CONTROL_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SoftReset(): USB failure\n"));
goto done;
}
#endif
//
// Force a FIFO reset by clearing and setting again the RESET_OFF bit
//
pThisDev->StIrTranceiver.ControlReg |= STIR4200_CTRL_SRESET;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_CONTROL_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SoftReset(): USB failure\n"));
goto done;
}
pThisDev->StIrTranceiver.ControlReg &= (~STIR4200_CTRL_SRESET);
if( (Status = St4200WriteRegister(pThisDev, STIR4200_CONTROL_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SoftReset(): USB failure\n"));
goto done;
}
done:
return Status;
}
/*****************************************************************************
*
* Function: St4200SetIrMode
*
* Synopsis: Sets the STIr4200 to the proper operational mode
*
* Arguments: pDevice - pointer to current ir device object
* mode - mode to set the tranceiver to
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200SetIrMode(
IN OUT PVOID pDevice,
ULONG mode
)
{
NTSTATUS Status;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
#if !defined(FAST_WRITE_REGISTERS)
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_MODE_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetIrMode(): USB failure\n"));
goto done;
}
#endif
//
// Remove all mode bits and set the proper mode
//
pThisDev->StIrTranceiver.ModeReg &= ~STIR4200_MODE_MASK;
pThisDev->StIrTranceiver.ModeReg |= STIR4200_MODE_RESET_OFF;
//
// Enable the bug fixing feature for LA8
//
#if defined(SUPPORT_LA8)
if( pThisDev->ChipRevision >= CHIP_REVISION_8 )
{
pThisDev->StIrTranceiver.ModeReg &= ~STIR4200_MODE_AUTO_RESET;
pThisDev->StIrTranceiver.ModeReg &= ~STIR4200_MODE_BULKIN_FIX;
}
#endif
switch( (IR_MODE)mode )
{
case IR_MODE_SIR:
pThisDev->StIrTranceiver.ModeReg |= STIR4200_MODE_SIR;
//if( pThisDev->linkSpeedInfo->BitsPerSec != SPEED_9600 )
pThisDev->StIrTranceiver.ModeReg |= STIR4200_MODE_BULKIN_FIX;
//pThisDev->StIrTranceiver.ModeReg |= STIR4200_MODE_ASK;
break;
#if !defined(WORKAROUND_BROKEN_MIR)
case IR_MODE_MIR:
pThisDev->MirIncompleteBitCount = 0;
pThisDev->MirOneBitCount = 0;
pThisDev->MirIncompleteByte = 0;
pThisDev->MirFlagCount = 0;
pThisDev->StIrTranceiver.ModeReg |= STIR4200_MODE_MIR;
break;
#endif
case IR_MODE_FIR:
pThisDev->StIrTranceiver.ModeReg |= STIR4200_MODE_FIR;
#if defined(SUPPORT_LA8)
if( pThisDev->ChipRevision >= CHIP_REVISION_8 )
{
pThisDev->StIrTranceiver.ModeReg |= STIR4200_MODE_BULKIN_FIX;
pThisDev->StIrTranceiver.ModeReg |= STIR4200_MODE_AUTO_RESET;
}
#endif
break;
default:
IRUSB_ASSERT( 0 );
}
if( (Status = St4200WriteRegister(pThisDev, STIR4200_MODE_REG) ) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetIrMode(): USB failure\n"));
goto done;
}
/***********************************************/
/* Set TEMIC transceiver... */
/***********************************************/
#if !defined(FAST_WRITE_REGISTERS)
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_CONTROL_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetIrMode(): USB failure\n"));
goto done;
}
#endif
pThisDev->StIrTranceiver.ControlReg |= STIR4200_CTRL_SDMODE;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_CONTROL_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetIrMode(): USB failure\n"));
goto done;
}
#if !defined(FAST_WRITE_REGISTERS)
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_CONTROL_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetIrMode(): USB failure\n"));
goto done;
}
#endif
pThisDev->StIrTranceiver.ControlReg &= (~STIR4200_CTRL_SDMODE);
if( (Status = St4200WriteRegister(pThisDev, STIR4200_CONTROL_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetIrMode(): USB failure\n"));
goto done;
}
done:
return Status;
}
/*****************************************************************************
*
* Function: St4200SetSpeed
*
* Synopsis: Sets the STIr4200 speed
*
* Arguments: pDevice - pointer to current ir device object
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200SetSpeed(
IN OUT PVOID pDevice
)
{
NTSTATUS Status;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
#if defined(RECEIVE_LOGGING)
if( pThisDev->linkSpeedInfo->BitsPerSec==SPEED_4000000 )
{
IO_STATUS_BLOCK IoStatusBlock;
OBJECT_ATTRIBUTES ObjectAttributes;
UNICODE_STRING FileName;
NTSTATUS Status;
RtlInitUnicodeString(&FileName, L"\\DosDevices\\c:\\receive.log");
InitializeObjectAttributes(
&ObjectAttributes,
&FileName,
OBJ_CASE_INSENSITIVE,
NULL,
NULL
);
Status=ZwCreateFile(
&pThisDev->ReceiveFileHandle,
GENERIC_WRITE | SYNCHRONIZE,
&ObjectAttributes,
&IoStatusBlock,
0,
FILE_ATTRIBUTE_NORMAL,
FILE_SHARE_READ,
FILE_OVERWRITE_IF,
FILE_SYNCHRONOUS_IO_NONALERT,
NULL,
0
);
pThisDev->ReceiveFilePosition = 0;
}
else
{
if( pThisDev->ReceiveFileHandle )
{
ZwClose( pThisDev->ReceiveFileHandle );
pThisDev->ReceiveFileHandle = 0;
pThisDev->ReceiveFilePosition = 0;
}
}
#endif
#if defined(RECEIVE_ERROR_LOGGING)
if( pThisDev->linkSpeedInfo->BitsPerSec==SPEED_4000000 )
{
IO_STATUS_BLOCK IoStatusBlock;
OBJECT_ATTRIBUTES ObjectAttributes;
UNICODE_STRING FileName;
NTSTATUS Status;
RtlInitUnicodeString(&FileName, L"\\DosDevices\\c:\\receive_error.log");
InitializeObjectAttributes(
&ObjectAttributes,
&FileName,
OBJ_CASE_INSENSITIVE,
NULL,
NULL
);
Status=ZwCreateFile(
&pThisDev->ReceiveErrorFileHandle,
GENERIC_WRITE | SYNCHRONIZE,
&ObjectAttributes,
&IoStatusBlock,
0,
FILE_ATTRIBUTE_NORMAL,
FILE_SHARE_READ,
FILE_OVERWRITE_IF,
FILE_SYNCHRONOUS_IO_NONALERT,
NULL,
0
);
pThisDev->ReceiveErrorFilePosition = 0;
}
else
{
if( pThisDev->ReceiveErrorFileHandle )
{
ZwClose( pThisDev->ReceiveErrorFileHandle );
pThisDev->ReceiveErrorFileHandle = 0;
pThisDev->ReceiveErrorFilePosition = 0;
}
}
#endif
#if defined(SEND_LOGGING)
if( pThisDev->linkSpeedInfo->BitsPerSec==SPEED_4000000 )
{
IO_STATUS_BLOCK IoStatusBlock;
OBJECT_ATTRIBUTES ObjectAttributes;
UNICODE_STRING FileName;
NTSTATUS Status;
RtlInitUnicodeString(&FileName, L"\\DosDevices\\c:\\send.log");
InitializeObjectAttributes(
&ObjectAttributes,
&FileName,
OBJ_CASE_INSENSITIVE,
NULL,
NULL
);
Status=ZwCreateFile(
&pThisDev->SendFileHandle,
GENERIC_WRITE | SYNCHRONIZE,
&ObjectAttributes,
&IoStatusBlock,
0,
FILE_ATTRIBUTE_NORMAL,
FILE_SHARE_READ,
FILE_OVERWRITE_IF,
FILE_SYNCHRONOUS_IO_NONALERT,
NULL,
0
);
pThisDev->SendFilePosition = 0;
}
else
{
if( pThisDev->SendFileHandle )
{
ZwClose( pThisDev->SendFileHandle );
pThisDev->SendFileHandle = 0;
pThisDev->SendFilePosition = 0;
}
}
#endif
//
// Always force a new tuning
//
if( (Status = St4200TuneDpllAndSensitivity(pThisDev, pThisDev->linkSpeedInfo->BitsPerSec)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TuneDpllAndSensitivity(): USB failure\n"));
goto done;
}
//
// First power down the modulator
//
#if !defined(FAST_WRITE_REGISTERS)
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_CONTROL_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetSpeed(): USB failure\n"));
goto done;
}
#endif
pThisDev->StIrTranceiver.ControlReg |= (STIR4200_CTRL_TXPWD | STIR4200_CTRL_RXPWD);
pThisDev->StIrTranceiver.ControlReg |= STIR4200_CTRL_RXSLOW;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_CONTROL_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetSpeed(): USB failure\n"));
goto done;
}
//
// Then set baudrate
//
pThisDev->StIrTranceiver.BaudrateReg = pThisDev->linkSpeedInfo->Stir4200Divisor;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_BAUDRATE_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetSpeed(): USB failure\n"));
goto done;
}
//
// We'll have to write the MSB of baud-rate too (only for 2400)
//
if( pThisDev->linkSpeedInfo->BitsPerSec == SPEED_2400 )
{
pThisDev->StIrTranceiver.ModeReg |= STIR4200_MODE_PDLCK8;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_MODE_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetSpeed(): USB failure\n"));
goto done;
}
}
else
{
if( pThisDev->StIrTranceiver.ModeReg & STIR4200_MODE_PDLCK8 )
{
pThisDev->StIrTranceiver.ModeReg &= ~STIR4200_MODE_PDLCK8;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_MODE_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetSpeed(): USB failure\n"));
goto done;
}
}
}
//
// Modulator back up
//
pThisDev->StIrTranceiver.ControlReg &= (~(STIR4200_CTRL_TXPWD | STIR4200_CTRL_RXPWD));
if( (Status = St4200WriteRegister(pThisDev, STIR4200_CONTROL_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetSpeed(): USB failure\n"));
goto done;
}
//
// then IR mode
//
Status = St4200SetIrMode( pThisDev, pThisDev->linkSpeedInfo->IrMode );
if( Status != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetSpeed(): USB failure\n"));
goto done;
}
//
// Unmute it
//
pThisDev->StIrTranceiver.ControlReg &= ~STIR4200_CTRL_RXSLOW;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_CONTROL_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200SetSpeed(): USB failure\n"));
goto done;
}
//
// Program the receive delay for FIR
//
if( pThisDev->linkSpeedInfo->BitsPerSec == SPEED_4000000 )
{
if( pThisDev->dongleCaps.windowSize == 2 )
pThisDev->ReceiveAdaptiveDelay = STIR4200_MULTIPLE_READ_DELAY;
else
pThisDev->ReceiveAdaptiveDelay = 0;
pThisDev->ReceiveAdaptiveDelayBoost = 0;
}
#if defined(WORKAROUND_GEAR_DOWN)
//
// Force a reset if going to 9600 from 4M
//
pThisDev->GearedDown = FALSE;
if( pThisDev->linkSpeedInfo->BitsPerSec==SPEED_9600 && pThisDev->currentSpeed==SPEED_4000000 )
{
St4200ResetFifo( pThisDev );
pThisDev->GearedDown = TRUE;
}
#endif
done:
return STATUS_SUCCESS;
}
/*****************************************************************************
*
* Function: St4200GetFifoCount
*
* Synopsis: Verifies if there is data to be received
*
* Arguments: pDevice - pointer to current ir device object
* pCountFifo - pointer to variable to return FIFO count
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200GetFifoCount(
IN PVOID pDevice,
OUT PULONG pCountFifo
)
{
NTSTATUS Status = STATUS_SUCCESS;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
*pCountFifo = 0;
if( pThisDev->PreFifoCount )
{
*pCountFifo = pThisDev->PreFifoCount;
}
else
{
Status = St4200ReadRegisters( pThisDev, STIR4200_FIFOCNT_LSB_REG, 2 );
if( Status == STATUS_SUCCESS )
{
*pCountFifo =
((ULONG)MAKEUSHORT(pThisDev->StIrTranceiver.FifoCntLsbReg, pThisDev->StIrTranceiver.FifoCntMsbReg));
}
}
pThisDev->PreFifoCount = 0;
return Status;
}
/*****************************************************************************
*
* Function: St4200TuneDpllAndSensitivity
*
* Synopsis: tunes the DPLL and sensitivity registers
*
* Arguments: pDevice - pointer to current ir device object
* Speed - speed to tune for
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200TuneDpllAndSensitivity(
IN OUT PVOID pDevice,
ULONG Speed
)
{
NTSTATUS Status;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
#if !defined(FAST_WRITE_REGISTERS)
//
// Read the current value of the DPLL
//
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_DPLLTUNE_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TuneDpllAndSensitivity(): USB failure\n"));
goto done;
}
#endif
//
// Tune the DPLL according to the installed transceiver
//
switch( pThisDev->TransceiverType )
{
case TRANSCEIVER_INFINEON:
pThisDev->StIrTranceiver.DpllTuneReg = STIR4200_DPLL_DESIRED_INFI;
break;
case TRANSCEIVER_VISHAY:
pThisDev->StIrTranceiver.DpllTuneReg = STIR4200_DPLL_DESIRED_VISHAY;
break;
case TRANSCEIVER_4000:
pThisDev->StIrTranceiver.DpllTuneReg = STIR4200_DPLL_DESIRED_4000;
break;
case TRANSCEIVER_4012:
default:
switch( Speed )
{
case SPEED_9600:
case SPEED_19200:
case SPEED_38400:
case SPEED_57600:
case SPEED_115200:
pThisDev->StIrTranceiver.DpllTuneReg = STIR4200_DPLL_DESIRED_4012_SIR; //(UCHAR)pThisDev->SirDpll;
break;
case SPEED_4000000:
pThisDev->StIrTranceiver.DpllTuneReg = STIR4200_DPLL_DESIRED_4012_FIR; //(UCHAR)pThisDev->FirDpll;
break;
default:
pThisDev->StIrTranceiver.DpllTuneReg = STIR4200_DPLL_DESIRED_4012;
break;
}
break;
}
if( (Status = St4200WriteRegister(pThisDev, STIR4200_DPLLTUNE_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TuneDpllAndSensitivity(): USB failure\n"));
goto done;
}
#if !defined(FAST_WRITE_REGISTERS)
//
// Read the current value of the sensitivity
//
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_SENSITIVITY_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TuneDpllAndSensitivity(): USB failure\n"));
goto done;
}
#endif
//
// Tune the sensitivity
//
switch( pThisDev->TransceiverType )
{
case TRANSCEIVER_INFINEON:
switch( Speed )
{
default:
case SPEED_9600:
case SPEED_19200:
case SPEED_38400:
case SPEED_57600:
case SPEED_115200:
pThisDev->StIrTranceiver.SensitivityReg = STIR4200_SENS_RXDSNS_INFI_SIR;//(UCHAR)pThisDev->SirSensitivity;
break;
case SPEED_4000000:
pThisDev->StIrTranceiver.SensitivityReg = STIR4200_SENS_RXDSNS_INFI_FIR;//(UCHAR)pThisDev->FirSensitivity;
break;
}
break;
case TRANSCEIVER_VISHAY:
pThisDev->StIrTranceiver.SensitivityReg = STIR4200_SENS_RXDSNS_DEFAULT;
break;
case TRANSCEIVER_4000:
pThisDev->StIrTranceiver.SensitivityReg = STIR4200_SENS_RXDSNS_DEFAULT;
break;
case TRANSCEIVER_4012:
default:
switch( Speed )
{
default:
case SPEED_9600:
pThisDev->StIrTranceiver.SensitivityReg = STIR4200_SENS_RXDSNS_4012_SIR_9600;
break;
case SPEED_19200:
case SPEED_38400:
case SPEED_57600:
case SPEED_115200:
pThisDev->StIrTranceiver.SensitivityReg = STIR4200_SENS_RXDSNS_4012_SIR;//(UCHAR)pThisDev->SirSensitivity;
break;
case SPEED_4000000:
pThisDev->StIrTranceiver.SensitivityReg = STIR4200_SENS_RXDSNS_4012_FIR;//(UCHAR)pThisDev->FirSensitivity;
break;
}
break;
}
if( (Status = St4200WriteRegister(pThisDev, STIR4200_SENSITIVITY_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TuneDpllAndSensitivity(): USB failure\n"));
goto done;
}
done:
return Status;
}
/*****************************************************************************
*
* Function: St4200EnableOscillatorPowerDown
*
* Synopsis: enable the oscillator to power down when we go into suspend mode
*
* Arguments: pDevice - pointer to current ir device object
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200EnableOscillatorPowerDown(
IN OUT PVOID pDevice
)
{
NTSTATUS Status;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
#if !defined(FAST_WRITE_REGISTERS)
//
// Read the current value
//
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_TEST_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200EnableOscillatorPowerDown(): USB failure\n"));
goto done;
}
#endif
//
// Enable
//
pThisDev->StIrTranceiver.TestReg |= STIR4200_TEST_EN_OSC_SUSPEND;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_TEST_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200EnableOscillatorPowerDown(): USB failure\n"));
goto done;
}
done:
return Status;
}
/*****************************************************************************
*
* Function: St4200TurnOnSuspend
*
* Synopsis: prepares the part to go into suspend mode
*
* Arguments: pDevice - pointer to current ir device object
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200TurnOnSuspend(
IN OUT PVOID pDevice
)
{
NTSTATUS Status;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
#if !defined(FAST_WRITE_REGISTERS)
//
// Read the current value
//
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_CONTROL_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TurnOnSuspend(): USB failure\n"));
goto done;
}
#endif
//
// Control UOUT
//
pThisDev->StIrTranceiver.ControlReg |= STIR4200_CTRL_SDMODE;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_CONTROL_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TurnOnSuspend(): USB failure\n"));
goto done;
}
done:
return Status;
}
/*****************************************************************************
*
* Function: St4200TurnOffSuspend
*
* Synopsis: prepares the part to go back into operational mode
*
* Arguments: pDevice - pointer to current ir device object
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200TurnOffSuspend(
IN OUT PVOID pDevice
)
{
NTSTATUS Status;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
#if !defined(FAST_WRITE_REGISTERS)
//
// Read the current value
//
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_CONTROL_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TurnOffSuspend(): USB failure\n"));
goto done;
}
#endif
//
// Control UOUT
//
pThisDev->StIrTranceiver.ControlReg &= ~STIR4200_CTRL_SDMODE;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_CONTROL_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TurnOffSuspend(): USB failure\n"));
goto done;
}
done:
return Status;
}
/*****************************************************************************
*
* Function: St4200TurnOffReceiver
*
* Synopsis: turns of the STIr4200 receiver
*
* Arguments: pDevice - pointer to current ir device object
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200TurnOffReceiver(
IN OUT PVOID pDevice
)
{
NTSTATUS Status;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
#if !defined(FAST_WRITE_REGISTERS)
//
// Read the current value
//
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_CONTROL_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TurnOffReceiver(): USB failure\n"));
goto done;
}
#endif
//
// Turn off receiver
//
pThisDev->StIrTranceiver.ControlReg |= STIR4200_CTRL_RXPWD;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_CONTROL_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TurnOffReceiver(): USB failure\n"));
goto done;
}
done:
return Status;
}
/*****************************************************************************
*
* Function: St4200TurnOnReceiver
*
* Synopsis: turns on the STIr4200 receiver
*
* Arguments: pDevice - pointer to current ir device object
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200TurnOnReceiver(
IN OUT PVOID pDevice
)
{
NTSTATUS Status;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
#if !defined(FAST_WRITE_REGISTERS)
//
// Read the current value
//
if( (Status = St4200ReadRegisters(pThisDev, STIR4200_CONTROL_REG, 1)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TurnOnReceiver(): USB failure\n"));
goto done;
}
#endif
//
// Turn on receiver
//
pThisDev->StIrTranceiver.ControlReg &= ~STIR4200_CTRL_RXPWD;
if( (Status = St4200WriteRegister(pThisDev, STIR4200_CONTROL_REG)) != STATUS_SUCCESS )
{
DEBUGMSG(DBG_ERR, (" St4200TurnOnReceiver(): USB failure\n"));
goto done;
}
done:
return Status;
}
/*****************************************************************************
*
* Function: St4200WriteMultipleRegisters
*
* Synopsis: reads multiple registers from the tranceiver
*
* Arguments: pDevice - pointer to current ir device object
* FirstRegister - first register to write
* RegistersToWrite - number of registers
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200WriteMultipleRegisters(
IN PVOID pDevice,
UCHAR FirstRegister,
UCHAR RegistersToWrite
)
{
NTSTATUS status;
PIRUSB_CONTEXT pThisContext;
PURB pUrb = NULL;
PDEVICE_OBJECT pUrbTargetDev;
PIO_STACK_LOCATION pNextStack;
PIRP pIrp;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
PLIST_ENTRY pListEntry;
DEBUGMSG(DBG_FUNC, ("+St4200WriteMultipleRegisters\n"));
IRUSB_ASSERT( KeGetCurrentIrql() == PASSIVE_LEVEL );
//
// Make sure there isn't a halt/reset going on
//
if( pThisDev->fPendingHalt || pThisDev->fPendingReset || pThisDev->fPendingClearTotalStall )
{
DEBUGMSG(DBG_ERR, (" St4200WriteMultipleRegisters abort due to pending reset\n"));
status = STATUS_UNSUCCESSFUL;
goto done;
}
//
// Validate the parameters
//
if( (FirstRegister+RegistersToWrite)>(STIR4200_MAX_REG+1) )
{
DEBUGMSG(DBG_ERR, (" St4200WriteMultipleRegisters invalid input parameters\n"));
status = STATUS_UNSUCCESSFUL;
goto done;
}
pListEntry = ExInterlockedRemoveHeadList( &pThisDev->SendAvailableQueue, &pThisDev->SendLock );
if( NULL == pListEntry )
{
//
// This must not happen
//
DEBUGMSG(DBG_ERR, (" St4200WriteMultipleRegisters failed to find a free context struct\n"));
IRUSB_ASSERT( 0 );
status = STATUS_UNSUCCESSFUL;
goto done;
}
InterlockedDecrement( &pThisDev->SendAvailableCount );
pThisContext = CONTAINING_RECORD( pListEntry, IRUSB_CONTEXT, ListEntry );
pThisContext->ContextType = CONTEXT_READ_WRITE_REGISTER;
pUrb = pThisDev->pUrb;
NdisZeroMemory( pUrb, pThisDev->UrbLen );
//
// Now that we have created the urb, we will send a
// request to the USB device object.
//
pUrbTargetDev = pThisDev->pUsbDevObj;
//
// make an irp sending to usbhub
//
pIrp = IoAllocateIrp( (CCHAR)(pThisDev->pUsbDevObj->StackSize + 1), FALSE );
if( NULL == pIrp )
{
DEBUGMSG(DBG_ERR, (" St4200WriteMultipleRegisters failed to alloc IRP\n"));
ExInterlockedInsertTailList(
&pThisDev->SendAvailableQueue,
&pThisContext->ListEntry,
&pThisDev->SendLock
);
InterlockedIncrement( &pThisDev->SendAvailableCount );
status = STATUS_UNSUCCESSFUL;
goto done;
}
pIrp->IoStatus.Status = STATUS_PENDING;
pIrp->IoStatus.Information = 0;
pThisContext->pIrp = pIrp;
//
// Build our URB for USBD
//
pUrb->UrbControlVendorClassRequest.Hdr.Length = (USHORT)sizeof( struct _URB_CONTROL_VENDOR_OR_CLASS_REQUEST );
pUrb->UrbControlVendorClassRequest.Hdr.Function = URB_FUNCTION_VENDOR_DEVICE;
pUrb->UrbControlVendorClassRequest.TransferFlags = USBD_TRANSFER_DIRECTION_OUT;
// short packet is not treated as an error.
pUrb->UrbControlVendorClassRequest.TransferFlags |= USBD_SHORT_TRANSFER_OK;
pUrb->UrbControlVendorClassRequest.UrbLink = NULL;
pUrb->UrbControlVendorClassRequest.TransferBufferMDL = NULL;
pUrb->UrbControlVendorClassRequest.TransferBuffer = &(pThisDev->StIrTranceiver.FifoDataReg)+FirstRegister;
pUrb->UrbControlVendorClassRequest.TransferBufferLength = RegistersToWrite;
pUrb->UrbControlVendorClassRequest.Request = STIR4200_WRITE_REGS_REQ;
pUrb->UrbControlVendorClassRequest.RequestTypeReservedBits = 0;
pUrb->UrbControlVendorClassRequest.Index = FirstRegister;
//
// Call the class driver to perform the operation.
//
pNextStack = IoGetNextIrpStackLocation( pIrp );
IRUSB_ASSERT( pNextStack != NULL );
//
// pass the URB to the USB driver stack
//
pNextStack->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL;
pNextStack->Parameters.Others.Argument1 = pUrb;
pNextStack->Parameters.DeviceIoControl.IoControlCode = IOCTL_INTERNAL_USB_SUBMIT_URB;
IoSetCompletionRoutine(
pIrp, // irp to use
St4200CompleteReadWriteRequest, // routine to call when irp is done
DEV_TO_CONTEXT(pThisContext), // context to pass routine
TRUE, // call on success
TRUE, // call on error
TRUE // call on cancel
);
KeClearEvent( &pThisDev->EventSyncUrb );
//
// Call IoCallDriver to send the irp to the usb port.
//
ExInterlockedInsertTailList(
&pThisDev->ReadWritePendingQueue,
&pThisContext->ListEntry,
&pThisDev->SendLock
);
InterlockedIncrement( &pThisDev->ReadWritePendingCount );
status = MyIoCallDriver( pThisDev, pUrbTargetDev, pIrp );
//
// The USB driver should always return STATUS_PENDING when
// it receives a write irp
//
if( (status == STATUS_PENDING) || (status == STATUS_SUCCESS) )
{
// wait, but dump out on timeout
if( status == STATUS_PENDING )
{
status = MyKeWaitForSingleObject( pThisDev, &pThisDev->EventSyncUrb, NULL, 0 );
if( status == STATUS_TIMEOUT )
{
KIRQL OldIrql;
DEBUGMSG( DBG_ERR,(" St4200WriteMultipleRegisters() TIMED OUT! return from IoCallDriver USBD %x\n", status));
KeAcquireSpinLock( &pThisDev->SendLock, &OldIrql );
RemoveEntryList( &pThisContext->ListEntry );
KeReleaseSpinLock( &pThisDev->SendLock, OldIrql );
InterlockedDecrement( &pThisDev->ReadWritePendingCount );
IrUsb_CancelIo( pThisDev, pIrp, &pThisDev->EventSyncUrb );
}
}
}
else
{
DEBUGMSG( DBG_ERR, (" St4200WriteMultipleRegisters IoCallDriver FAILED(%x)\n",status));
IRUSB_ASSERT( status == STATUS_PENDING );
}
done:
DEBUGMSG(DBG_FUNC, ("-St4200WriteMultipleRegisters\n"));
return status;
}
/*****************************************************************************
*
* Function: St4200WriteRegister
*
* Synopsis: writes a STIr4200 register
*
* Arguments: pDevice - pointer to current ir device object
* FirstRegister - first register to write
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200WriteRegister(
IN PVOID pDevice,
UCHAR RegisterToWrite
)
{
NTSTATUS status;
PIRUSB_CONTEXT pThisContext;
PURB pUrb = NULL;
PDEVICE_OBJECT pUrbTargetDev;
PIO_STACK_LOCATION pNextStack;
PIRP pIrp;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
PLIST_ENTRY pListEntry;
DEBUGMSG(DBG_FUNC, ("+St4200WriteRegister\n"));
IRUSB_ASSERT( KeGetCurrentIrql() == PASSIVE_LEVEL );
//
// Make sure there isn't a halt/reset going on
//
if( pThisDev->fPendingHalt || pThisDev->fPendingReset || pThisDev->fPendingClearTotalStall )
{
DEBUGMSG(DBG_ERR, (" St4200WriteRegister abort due to pending reset\n"));
status = STATUS_UNSUCCESSFUL;
goto done;
}
//
// Validate the parameters
//
if( RegisterToWrite>STIR4200_MAX_REG )
{
DEBUGMSG(DBG_ERR, (" St4200WriteRegister invalid input parameters\n"));
status = STATUS_UNSUCCESSFUL;
goto done;
}
pListEntry = ExInterlockedRemoveHeadList( &pThisDev->SendAvailableQueue, &pThisDev->SendLock );
if( NULL == pListEntry )
{
//
// This must not happen
//
DEBUGMSG(DBG_ERR, (" St4200WriteRegister failed to find a free context struct\n"));
IRUSB_ASSERT( 0 );
status = STATUS_UNSUCCESSFUL;
goto done;
}
InterlockedDecrement( &pThisDev->SendAvailableCount );
pThisContext = CONTAINING_RECORD( pListEntry, IRUSB_CONTEXT, ListEntry );
pThisContext->ContextType = CONTEXT_READ_WRITE_REGISTER;
pUrb = pThisDev->pUrb;
NdisZeroMemory( pUrb, pThisDev->UrbLen );
//
// Now that we have created the urb, we will send a
// request to the USB device object.
//
pUrbTargetDev = pThisDev->pUsbDevObj;
//
// make an irp sending to usbhub
//
pIrp = IoAllocateIrp( (CCHAR)(pThisDev->pUsbDevObj->StackSize + 1), FALSE );
if( NULL == pIrp )
{
DEBUGMSG(DBG_ERR, (" St4200WriteRegister failed to alloc IRP\n"));
ExInterlockedInsertTailList(
&pThisDev->SendAvailableQueue,
&pThisContext->ListEntry,
&pThisDev->SendLock
);
InterlockedIncrement( &pThisDev->SendAvailableCount );
status = STATUS_UNSUCCESSFUL;
goto done;
}
pIrp->IoStatus.Status = STATUS_PENDING;
pIrp->IoStatus.Information = 0;
pThisContext->pIrp = pIrp;
//
// Build our URB for USBD
//
pUrb->UrbControlVendorClassRequest.Hdr.Length = (USHORT) sizeof( struct _URB_CONTROL_VENDOR_OR_CLASS_REQUEST );
pUrb->UrbControlVendorClassRequest.Hdr.Function = URB_FUNCTION_VENDOR_DEVICE;
pUrb->UrbControlVendorClassRequest.TransferFlags = USBD_TRANSFER_DIRECTION_OUT;
// short packet is not treated as an error.
pUrb->UrbControlVendorClassRequest.TransferFlags |= USBD_SHORT_TRANSFER_OK;
pUrb->UrbControlVendorClassRequest.UrbLink = NULL;
pUrb->UrbControlVendorClassRequest.TransferBufferMDL = NULL;
pUrb->UrbControlVendorClassRequest.Value = *(&pThisDev->StIrTranceiver.FifoDataReg+RegisterToWrite);
pUrb->UrbControlVendorClassRequest.Request = STIR4200_WRITE_REG_REQ;
pUrb->UrbControlVendorClassRequest.RequestTypeReservedBits = 0;
pUrb->UrbControlVendorClassRequest.Index = RegisterToWrite;
//
// Call the class driver to perform the operation.
//
pNextStack = IoGetNextIrpStackLocation( pIrp );
IRUSB_ASSERT( pNextStack != NULL );
//
// pass the URB to the USB driver stack
//
pNextStack->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL;
pNextStack->Parameters.Others.Argument1 = pUrb;
pNextStack->Parameters.DeviceIoControl.IoControlCode = IOCTL_INTERNAL_USB_SUBMIT_URB;
IoSetCompletionRoutine(
pIrp, // irp to use
St4200CompleteReadWriteRequest, // routine to call when irp is done
DEV_TO_CONTEXT(pThisContext), // context to pass routine
TRUE, // call on success
TRUE, // call on error
TRUE // call on cancel
);
KeClearEvent( &pThisDev->EventSyncUrb );
//
// Call IoCallDriver to send the irp to the usb port.
//
ExInterlockedInsertTailList(
&pThisDev->ReadWritePendingQueue,
&pThisContext->ListEntry,
&pThisDev->SendLock
);
InterlockedIncrement( &pThisDev->ReadWritePendingCount );
status = MyIoCallDriver( pThisDev, pUrbTargetDev, pIrp );
//
// The USB driver should always return STATUS_PENDING when
// it receives a write irp
//
if( (status == STATUS_PENDING) || (status == STATUS_SUCCESS) )
{
// wait, but dump out on timeout
if( status == STATUS_PENDING )
{
status = MyKeWaitForSingleObject( pThisDev, &pThisDev->EventSyncUrb, NULL, 0 );
if( status == STATUS_TIMEOUT )
{
KIRQL OldIrql;
DEBUGMSG( DBG_ERR,(" St4200WriteRegister() TIMED OUT! return from IoCallDriver USBD %x\n", status));
KeAcquireSpinLock( &pThisDev->SendLock, &OldIrql );
RemoveEntryList( &pThisContext->ListEntry );
KeReleaseSpinLock( &pThisDev->SendLock, OldIrql );
InterlockedDecrement( &pThisDev->ReadWritePendingCount );
IrUsb_CancelIo( pThisDev, pIrp, &pThisDev->EventSyncUrb );
}
}
}
else
{
DEBUGMSG( DBG_ERR, (" St4200WriteRegister IoCallDriver FAILED(%x)\n",status));
IRUSB_ASSERT( status == STATUS_PENDING );
}
done:
DEBUGMSG(DBG_FUNC, ("-St4200WriteRegister\n"));
return status;
}
/*****************************************************************************
*
* Function: St4200ReadRegisters
*
* Synopsis: reads multiple STIr4200 register
*
* Arguments: pDevice - pointer to current ir device object
* FirstRegister - first register to read
* RegistersToWrite - number of registers to read
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200ReadRegisters(
IN OUT PVOID pDevice,
UCHAR FirstRegister,
UCHAR RegistersToRead
)
{
NTSTATUS status;
PIRUSB_CONTEXT pThisContext;
PURB pUrb = NULL;
PDEVICE_OBJECT pUrbTargetDev;
PIO_STACK_LOCATION pNextStack;
PIRP pIrp;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
PLIST_ENTRY pListEntry;
DEBUGMSG(DBG_FUNC, ("+St4200ReadRegisters\n"));
IRUSB_ASSERT( KeGetCurrentIrql() == PASSIVE_LEVEL );
//
// Make sure there isn't a halt/reset going on
//
if( pThisDev->fPendingHalt || pThisDev->fPendingReset || pThisDev->fPendingClearTotalStall )
{
DEBUGMSG(DBG_ERR, (" St4200ReadRegisters abort due to pending reset\n"));
status = STATUS_UNSUCCESSFUL;
goto done;
}
//
// Validate the parameters
//
if( (FirstRegister+RegistersToRead)>(STIR4200_MAX_REG+1) )
{
DEBUGMSG(DBG_ERR, (" St4200ReadRegisters invalid input parameters\n"));
status = STATUS_UNSUCCESSFUL;
goto done;
}
pListEntry = ExInterlockedRemoveHeadList( &pThisDev->SendAvailableQueue, &pThisDev->SendLock );
if( NULL == pListEntry )
{
//
// This must not happen
//
DEBUGMSG(DBG_ERR, (" St4200ReadRegisters failed to find a free context struct\n"));
IRUSB_ASSERT( 0 );
status = STATUS_UNSUCCESSFUL;
goto done;
}
InterlockedDecrement( &pThisDev->SendAvailableCount );
pThisContext = CONTAINING_RECORD( pListEntry, IRUSB_CONTEXT, ListEntry );
pThisContext->ContextType = CONTEXT_READ_WRITE_REGISTER;
pUrb = pThisDev->pUrb;
NdisZeroMemory( pUrb, pThisDev->UrbLen );
//
// Now that we have created the urb, we will send a
// request to the USB device object.
//
pUrbTargetDev = pThisDev->pUsbDevObj;
//
// make an irp sending to usbhub
//
pIrp = IoAllocateIrp( (CCHAR)(pThisDev->pUsbDevObj->StackSize + 1), FALSE );
if( NULL == pIrp )
{
DEBUGMSG(DBG_ERR, (" St4200ReadRegisters failed to alloc IRP\n"));
ExInterlockedInsertTailList(
&pThisDev->SendAvailableQueue,
&pThisContext->ListEntry,
&pThisDev->SendLock
);
InterlockedIncrement( &pThisDev->SendAvailableCount );
status = STATUS_UNSUCCESSFUL;
goto done;
}
pIrp->IoStatus.Status = STATUS_PENDING;
pIrp->IoStatus.Information = 0;
pThisContext->pIrp = pIrp;
//
// Build our URB for USBD
//
pUrb->UrbControlVendorClassRequest.Hdr.Length = (USHORT) sizeof( struct _URB_CONTROL_VENDOR_OR_CLASS_REQUEST );
pUrb->UrbControlVendorClassRequest.Hdr.Function = URB_FUNCTION_VENDOR_DEVICE ;
pUrb->UrbControlVendorClassRequest.TransferFlags = USBD_TRANSFER_DIRECTION_IN ;
// short packet is not treated as an error.
pUrb->UrbControlVendorClassRequest.TransferFlags |= USBD_SHORT_TRANSFER_OK;
pUrb->UrbControlVendorClassRequest.UrbLink = NULL;
pUrb->UrbControlVendorClassRequest.TransferBufferMDL = NULL;
pUrb->UrbControlVendorClassRequest.TransferBuffer = &(pThisDev->StIrTranceiver.FifoDataReg)+FirstRegister;
pUrb->UrbControlVendorClassRequest.TransferBufferLength = RegistersToRead;
pUrb->UrbControlVendorClassRequest.Request = STIR4200_READ_REGS_REQ;
pUrb->UrbControlVendorClassRequest.RequestTypeReservedBits = 0;
pUrb->UrbControlVendorClassRequest.Index = FirstRegister;
//
// Call the class driver to perform the operation.
//
pNextStack = IoGetNextIrpStackLocation( pIrp );
IRUSB_ASSERT( pNextStack != NULL );
//
// pass the URB to the USB driver stack
//
pNextStack->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL;
pNextStack->Parameters.Others.Argument1 = pUrb;
pNextStack->Parameters.DeviceIoControl.IoControlCode = IOCTL_INTERNAL_USB_SUBMIT_URB;
IoSetCompletionRoutine(
pIrp, // irp to use
St4200CompleteReadWriteRequest, // routine to call when irp is done
DEV_TO_CONTEXT(pThisContext), // context to pass routine
TRUE, // call on success
TRUE, // call on error
TRUE // call on cancel
);
KeClearEvent( &pThisDev->EventSyncUrb );
//
// Call IoCallDriver to send the irp to the usb port.
//
ExInterlockedInsertTailList(
&pThisDev->ReadWritePendingQueue,
&pThisContext->ListEntry,
&pThisDev->SendLock
);
InterlockedIncrement( &pThisDev->ReadWritePendingCount );
status = MyIoCallDriver( pThisDev, pUrbTargetDev, pIrp );
//
// The USB driver should always return STATUS_PENDING when
// it receives a write irp
//
if( (status == STATUS_PENDING) || (status == STATUS_SUCCESS) )
{
// wait, but dump out on timeout
if( status == STATUS_PENDING )
{
status = MyKeWaitForSingleObject( pThisDev, &pThisDev->EventSyncUrb, NULL, 0 );
if( status == STATUS_TIMEOUT )
{
KIRQL OldIrql;
DEBUGMSG( DBG_ERR,(" St4200ReadRegisters() TIMED OUT! return from IoCallDriver USBD %x\n", status));
KeAcquireSpinLock( &pThisDev->SendLock, &OldIrql );
RemoveEntryList( &pThisContext->ListEntry );
KeReleaseSpinLock( &pThisDev->SendLock, OldIrql );
InterlockedDecrement( &pThisDev->ReadWritePendingCount );
IrUsb_CancelIo( pThisDev, pIrp, &pThisDev->EventSyncUrb );
}
else
{
//
// Update the status to reflect the real return code
//
status = pThisDev->StatusReadWrite;
}
}
}
else
{
DEBUGMSG( DBG_ERR, (" St4200ReadRegisters IoCallDriver FAILED(%x)\n",status));
//
// Don't assert, as such a failure can happen at shutdown
//
//IRUSB_ASSERT( status == STATUS_PENDING );
}
done:
DEBUGMSG(DBG_FUNC, ("-St4200ReadRegisters\n"));
return status;
}
/*****************************************************************************
*
* Function: St4200CompleteReadWriteRequest
*
* Synopsis: completes a read/write ST4200 register request
*
* Arguments: pUsbDevObj - pointer to the device object which
* completed the irp
* pIrp - the irp which was completed by the device
* object
* Context - send context
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200CompleteReadWriteRequest(
IN PDEVICE_OBJECT pUsbDevObj,
IN PIRP pIrp,
IN PVOID Context
)
{
PIR_DEVICE pThisDev;
NTSTATUS status;
PIRUSB_CONTEXT pThisContext = (PIRUSB_CONTEXT)Context;
PIRP pContextIrp;
PURB pContextUrb;
PLIST_ENTRY pListEntry;
DEBUGMSG(DBG_FUNC, ("+St4200CompleteReadWriteRequest\n"));
//
// The context given to IoSetCompletionRoutine is an IRUSB_CONTEXT struct
//
IRUSB_ASSERT( NULL != pThisContext ); // we better have a non NULL buffer
pThisDev = pThisContext->pThisDev;
IRUSB_ASSERT( NULL != pThisDev );
pContextIrp = pThisContext->pIrp;
pContextUrb = pThisDev->pUrb;
//
// Perform various IRP, URB, and buffer 'sanity checks'
//
IRUSB_ASSERT( pContextIrp == pIrp ); // check we're not a bogus IRP
status = pIrp->IoStatus.Status;
//
// we should have failed, succeeded, or cancelled, but NOT be pending
//
IRUSB_ASSERT( STATUS_PENDING != status );
//
// Remove from the pending queue (only if NOT cancelled)
//
if( status != STATUS_CANCELLED )
{
KIRQL OldIrql;
KeAcquireSpinLock( &pThisDev->SendLock, &OldIrql );
RemoveEntryList( &pThisContext->ListEntry );
KeReleaseSpinLock( &pThisDev->SendLock, OldIrql );
InterlockedDecrement( &pThisDev->ReadWritePendingCount );
}
//pIrp->IoStatus.Information = pContextUrb->UrbControlVendorClassRequest.TransferBufferLength;
DEBUGMSG(DBG_OUT,
(" St4200CompleteReadWriteRequest pIrp->IoStatus.Status = 0x%x\n", status));
//DEBUGMSG(DBG_OUT,
// (" St4200CompleteReadWriteRequest pIrp->IoStatus.Information = 0x%x, dec %d\n", pIrp->IoStatus.Information,pIrp->IoStatus.Information));
//
// Free the IRP because we alloced it ourselves,
//
IoFreeIrp( pIrp );
InterlockedIncrement( &pThisDev->NumReadWrites );
IrUsb_DecIoCount( pThisDev ); // we will track count of pending irps
//
// Put back on the available queue
//
ExInterlockedInsertTailList(
&pThisDev->SendAvailableQueue,
&pThisContext->ListEntry,
&pThisDev->SendLock
);
InterlockedIncrement( &pThisDev->SendAvailableCount );
if( ( STATUS_SUCCESS != status ) && ( STATUS_CANCELLED != status ) )
{
InterlockedIncrement( (PLONG)&pThisDev->NumReadWriteErrors );
//
// We have a serious USB failure, we'll have to issue a total reset
//
if( !pThisDev->fPendingClearTotalStall && !pThisDev->fPendingHalt
&& !pThisDev->fPendingReset && pThisDev->fProcessing )
{
DEBUGMSG(DBG_ERR, (" St4200CompleteReadWriteRequest error, will schedule an entire reset\n"));
//DbgPrint(" St4200CompleteReadWriteRequest error, will schedule an entire reset\n");
InterlockedExchange( (PLONG)&pThisDev->fPendingClearTotalStall, TRUE );
ScheduleWorkItem( pThisDev, RestoreIrDevice, NULL, 0 );
}
}
//
// This will only work as long as we serialize the access to the hardware
//
pThisDev->StatusReadWrite = status;
//
// Signal we're done
//
KeSetEvent( &pThisDev->EventSyncUrb, 0, FALSE );
DEBUGMSG(DBG_FUNC, ("-St4200CompleteReadWriteRequest\n"));
return STATUS_MORE_PROCESSING_REQUIRED;
}
#if defined( WORKAROUND_STUCK_AFTER_GEAR_DOWN )
/*****************************************************************************
*
* Function: St4200FakeSend
*
* Synopsis: forces a bulk transfer
*
* Arguments: pDevice - pointer to current ir device object
* pData - pointer to bulk data
* DataSize - size of bulk data
*
* Returns: NT_STATUS
*
*
*****************************************************************************/
NTSTATUS
St4200FakeSend(
IN PVOID pDevice,
PUCHAR pData,
ULONG DataSize
)
{
NTSTATUS status;
PIRUSB_CONTEXT pThisContext;
PURB pUrb = NULL;
PDEVICE_OBJECT pUrbTargetDev;
PIO_STACK_LOCATION pNextStack;
PIRP pIrp;
PIR_DEVICE pThisDev = (PIR_DEVICE)pDevice;
PLIST_ENTRY pListEntry;
DEBUGMSG(DBG_FUNC, ("+St4200FakeSend\n"));
IRUSB_ASSERT( KeGetCurrentIrql() == PASSIVE_LEVEL );
//
// Stop if a halt/reset/suspend is going on
//
if( pThisDev->fPendingWriteClearStall || pThisDev->fPendingHalt ||
pThisDev->fPendingReset || pThisDev->fPendingClearTotalStall || !pThisDev->fProcessing )
{
DEBUGMSG(DBG_ERR, (" St4200FakeSend abort due to pending reset\n"));
status = STATUS_UNSUCCESSFUL;
goto done;
}
pListEntry = ExInterlockedRemoveHeadList( &pThisDev->SendAvailableQueue, &pThisDev->SendLock );
if( NULL == pListEntry )
{
//
// This must not happen
//
DEBUGMSG(DBG_ERR, (" St4200FakeSend failed to find a free context struct\n"));
IRUSB_ASSERT( 0 );
status = STATUS_UNSUCCESSFUL;
goto done;
}
InterlockedDecrement( &pThisDev->SendAvailableCount );
pThisContext = CONTAINING_RECORD( pListEntry, IRUSB_CONTEXT, ListEntry );
pThisContext->ContextType = CONTEXT_READ_WRITE_REGISTER;
pUrb = pThisDev->pUrb;
NdisZeroMemory( pUrb, pThisDev->UrbLen );
//
// Now that we have created the urb, we will send a
// request to the USB device object.
//
pUrbTargetDev = pThisDev->pUsbDevObj;
//
// make an irp sending to usbhub
//
pIrp = IoAllocateIrp( (CCHAR)(pThisDev->pUsbDevObj->StackSize + 1), FALSE );
if( NULL == pIrp )
{
DEBUGMSG(DBG_ERR, (" St4200FakeSend failed to alloc IRP\n"));
ExInterlockedInsertTailList(
&pThisDev->SendAvailableQueue,
&pThisContext->ListEntry,
&pThisDev->SendLock
);
InterlockedIncrement( &pThisDev->SendAvailableCount );
status = STATUS_UNSUCCESSFUL;
goto done;
}
pIrp->IoStatus.Status = STATUS_PENDING;
pIrp->IoStatus.Information = 0;
pThisContext->pIrp = pIrp;
//
// Build our URB for USBD
//
pUrb->UrbBulkOrInterruptTransfer.Hdr.Length = (USHORT)sizeof( struct _URB_BULK_OR_INTERRUPT_TRANSFER );
pUrb->UrbBulkOrInterruptTransfer.Hdr.Function = URB_FUNCTION_BULK_OR_INTERRUPT_TRANSFER;
pUrb->UrbBulkOrInterruptTransfer.PipeHandle = pThisDev->BulkOutPipeHandle;
pUrb->UrbBulkOrInterruptTransfer.TransferFlags = USBD_TRANSFER_DIRECTION_OUT ;
// short packet is not treated as an error.
pUrb->UrbBulkOrInterruptTransfer.TransferFlags |= USBD_SHORT_TRANSFER_OK;
pUrb->UrbBulkOrInterruptTransfer.UrbLink = NULL;
pUrb->UrbBulkOrInterruptTransfer.TransferBufferMDL = NULL;
pUrb->UrbBulkOrInterruptTransfer.TransferBuffer = pData;
pUrb->UrbBulkOrInterruptTransfer.TransferBufferLength = (int)DataSize;
//
// Call the class driver to perform the operation.
//
pNextStack = IoGetNextIrpStackLocation( pIrp );
IRUSB_ASSERT( pNextStack != NULL );
//
// pass the URB to the USB driver stack
//
pNextStack->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL;
pNextStack->Parameters.Others.Argument1 = pUrb;
pNextStack->Parameters.DeviceIoControl.IoControlCode = IOCTL_INTERNAL_USB_SUBMIT_URB;
IoSetCompletionRoutine(
pIrp, // irp to use
St4200CompleteReadWriteRequest, // routine to call when irp is done
DEV_TO_CONTEXT(pThisContext), // context to pass routine
TRUE, // call on success
TRUE, // call on error
TRUE // call on cancel
);
KeClearEvent( &pThisDev->EventSyncUrb );
//
// Call IoCallDriver to send the irp to the usb port.
//
ExInterlockedInsertTailList(
&pThisDev->ReadWritePendingQueue,
&pThisContext->ListEntry,
&pThisDev->SendLock
);
InterlockedIncrement( &pThisDev->ReadWritePendingCount );
status = MyIoCallDriver( pThisDev, pUrbTargetDev, pIrp );
//
// The USB driver should always return STATUS_PENDING when
// it receives a write irp
//
if( (status == STATUS_PENDING) || (status == STATUS_SUCCESS) )
{
// wait, but dump out on timeout
if( status == STATUS_PENDING )
{
status = MyKeWaitForSingleObject( pThisDev, &pThisDev->EventSyncUrb, NULL, 0 );
if( status == STATUS_TIMEOUT )
{
KIRQL OldIrql;
DEBUGMSG( DBG_ERR,(" St4200FakeSend() TIMED OUT! return from IoCallDriver USBD %x\n", status));
KeAcquireSpinLock( &pThisDev->SendLock, &OldIrql );
RemoveEntryList( &pThisContext->ListEntry );
KeReleaseSpinLock( &pThisDev->SendLock, OldIrql );
InterlockedDecrement( &pThisDev->ReadWritePendingCount );
IrUsb_CancelIo( pThisDev, pIrp, &pThisDev->EventSyncUrb );
}
}
}
else
{
DEBUGMSG( DBG_ERR, (" St4200FakeSend IoCallDriver FAILED(%x)\n",status));
IRUSB_ASSERT( status == STATUS_PENDING );
}
done:
DEBUGMSG(DBG_FUNC, ("-St4200FakeSend\n"));
return status;
}
#endif
Reference in a new issue Copy permalink