windows-nt/Source/XPSP1/NT/drivers/video/ms/cirrus/disp/hw.h

1127 lines
59 KiB
C
Raw Normal View History

2020-09-26 03:20:57 -05:00
/******************************************************************************\
*
* $Workfile: hw.h $
*
* All the hardware specific driver file stuff. Parts are mirrored in
* 'hw.inc'.
*
* Copyright (c) 1992-1995 Microsoft Corporation
* Copyright (c) 1996 Cirrus Logic, Inc.
*
* $Log: S:/projects/drivers/ntsrc/display/HW.H_V $
*
* Rev 1.4 10 Jan 1997 15:40:14 PLCHU
*
*
* Rev 1.3 Nov 07 1996 16:48:02 unknown
*
*
* Rev 1.1 Oct 10 1996 15:37:46 unknown
*
*
* Rev 1.3 12 Aug 1996 16:48:16 frido
* Cleaned up source.
*
* Rev 1.2 29 Jul 1996 12:28:38 frido
* Added WriteMask register.
*
* Rev 1.1 03 Jul 1996 13:38:42 frido
* Added DirectDraw support.
*
* sge01 10-23-96 Add second aperture flag
*
* sge02 10-29-96 Merge port and register access for
* VGA relocatable and MMIO registers.
*
\******************************************************************************/
#define CP_TRACK() \
( \
DISPDBG((100, "CP access - File(%s) line(%d)", __FILE__, __LINE__)) \
)
////////////////////////////////////////////////////////////////////////////////
// Ports //
////////////////////////////////////////////////////////////////////////////////
#define SR_INDEX 0x3C4 // Sequencer Registers
#define SR_DATA 0x3C5
#define DAC_PEL_READ_ADDR 0x3C7
#define DAC_PEL_WRITE_ADDR 0x3C8
#define DAC_PEL_DATA 0x3C9
#define INDEX_REG 0x3CE // Graphics Controler Registers
#define DATA_REG 0x3CF
#if 1 // extra defines
#define CRTC_INDEX 0x3D4 // CRT Controller Registers
#define CRTC_DATA 0x3D5
#define STATUS_1 0x3DA // Input Status Register 1
#define DISPLAY_MODE_INACTIVE 0x01
#define VBLANK_ACTIVE 0x08
#endif
////////////////////////////////////////////////////////////////////////////////
// Alpha and PowerPC considerations
//
// Both the Alpha and the PowerPC do not guarantee that I/O to separate
// addresses will be executed in order. The Alpha and PowerPC differ, however,
// in that the PowerPC guarantees that output to the same address will be
// executed in order, while the Alpha may cache and 'collapse' consecutive
// output to become only one output.
//
// Consequently, we use the following synchronization macros. They are
// relatively expensive in terms of performance, so we try to avoid them
// whereever possible.
//
// CP_EIEIO() 'Ensure In-order Execution of I/O'
// - Used to flush any pending I/O in situations where we wish to avoid
// out-of-order execution of I/O to separate addresses.
//
// CP_MEMORY_BARRIER()
// - Used to flush any pending I/O in situations where we wish to avoid
// out-of-order execution or 'collapsing' of I/O to the same address. On
// the PowerPC, this will be defined as a null operation.
#if defined(_PPC_)
// On PowerPC, CP_MEMORY_BARRIER doesn't do anything.
#define CP_EIEIO() MEMORY_BARRIER()
#define CP_MEMORY_BARRIER() 0
#elseif defined(_ALPHA_)
// On Alpha, CP_EIEIO() is the same thing as a CP_MEMORY_BARRIER().
#define CP_EIEIO() MEMORY_BARRIER()
#define CP_MEMORY_BARRIER() MEMORY_BARRIER()
#else
// On i386 and MIPS, there is nu such thing as MEMORY_BARRIER.
#define CP_EIEIO() 0
#define CP_MEMORY_BARRIER() 0
#endif
//
// Merge port and register access for VGA relocatable and MMIO registers.
//
#define CL_READ_PORT_UCHAR(Port) ppdev->pfnREAD_PORT_UCHAR(Port)
#define CL_READ_PORT_USHORT(Port) ppdev->pfnREAD_PORT_USHORT(Port)
#define CL_READ_PORT_ULONG(Port) ppdev->pfnREAD_PORT_ULONG(Port)
#define CL_WRITE_PORT_UCHAR(Port, Value) ppdev->pfnWRITE_PORT_UCHAR(Port, Value)
#define CL_WRITE_PORT_USHORT(Port, Value) ppdev->pfnWRITE_PORT_USHORT(Port, Value)
#define CL_WRITE_PORT_ULONG(Port, Value) ppdev->pfnWRITE_PORT_ULONG(Port, Value)
////////////////////////////////////////////////////////////////////////////////
// Port access macros //
////////////////////////////////////////////////////////////////////////////////
#define CP_OUT_DWORD(pjBase, cjOffset, ul) \
( \
CP_TRACK(), \
CL_WRITE_PORT_ULONG((BYTE*) (pjBase) + (cjOffset), (DWORD) (ul)), \
CP_EIEIO() \
)
#define CP_OUT_WORD(pjBase, cjOffset, w) \
( \
CP_TRACK(), \
CL_WRITE_PORT_USHORT((BYTE*) (pjBase) + (cjOffset), (WORD) (w)), \
CP_EIEIO() \
)
#define CP_OUT_BYTE(pjBase, cjOffset, j) \
( \
CP_TRACK(), \
CL_WRITE_PORT_UCHAR((BYTE*) (pjBase) + (cjOffset), (BYTE) (j)), \
CP_EIEIO() \
)
#define CP_IN_DWORD(pjBase, cjOffset) \
( \
CP_TRACK(), \
CL_READ_PORT_ULONG((BYTE*) (pjBase) + (cjOffset)) \
)
#define CP_IN_WORD(pjBase, cjOffset) \
( \
CP_TRACK(), \
CL_READ_PORT_USHORT((BYTE*) (pjBase) + (cjOffset)) \
)
#define CP_IN_BYTE(pjBase, cjOffset) \
( \
CP_TRACK(), \
CL_READ_PORT_UCHAR((BYTE*) (pjBase) + (cjOffset)) \
)
////////////////////////////////////////////////////////////////////////////////
// Memory mapped register access macros //
////////////////////////////////////////////////////////////////////////////////
#define CP_WRITE_ULONG(pjBase, cjOffset, ul) \
( \
CP_TRACK(), \
WRITE_REGISTER_ULONG((ULONG*)((BYTE*)(pjBase) + (cjOffset)), (DWORD)(ul)) \
)
#define CP_WRITE_USHORT(pjBase, cjOffset, w) \
( \
CP_TRACK(), \
WRITE_REGISTER_USHORT((BYTE*) (pjBase) + (cjOffset), (WORD) (w)) \
)
#define CP_WRITE_UCHAR(pjBase, cjOffset, j) \
( \
CP_TRACK(), \
WRITE_REGISTER_UCHAR((BYTE*) (pjBase) + (cjOffset), (BYTE) (j)) \
)
#define CP_READ_ULONG(pjBase, cjOffset) \
( \
CP_TRACK(), \
READ_REGISTER_ULONG((BYTE*) (pjBase) + (cjOffset)) \
)
#define CP_READ_USHORT(pjBase, cjOffset) \
( \
CP_TRACK(), \
READ_REGISTER_USHORT((BYTE*) (pjBase) + (cjOffset)) \
)
#define CP_READ_UCHAR(pjBase, cjOffset) \
( \
CP_TRACK(), \
READ_REGISTER_UCHAR((BYTE*) (pjBase) + (cjOffset)) \
)
////////////////////////////////////////////////////////////////////////////////
// Blt engine MM register access macros //
////////////////////////////////////////////////////////////////////////////////
#define CP_MM_ACL_STAT(ppdev, pjBase) \
( \
CP_READ_UCHAR(pjBase, MM_BLT_START_STATUS_REG) \
)
#define CP_MM_ROP(ppdev, pjBase, val) \
{ \
CP_WRITE_UCHAR(pjBase, MM_BLT_ROP, val); \
} \
#define CP_MM_SRC_Y_OFFSET(ppdev, pjBase, val) \
{ \
CP_WRITE_USHORT(pjBase, MM_BLT_SRC_PITCH, val); \
}
#define CP_MM_DST_Y_OFFSET(ppdev, pjBase, val) \
{ \
CP_WRITE_USHORT(pjBase, MM_BLT_DST_PITCH, val); \
}
#define CP_MM_SRC_ADDR(ppdev, pjBase, val) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_SRC_ADDR, val); \
}
#define CP_MM_DST_WRITE_MASK(ppdev, pjBase, val) \
{ \
CP_WRITE_UCHAR(pjBase, MM_BLT_DST_WRITE_MASK, val); \
}
#define CP_MM_BLT_MODE(ppdev, pjBase, val) \
{ \
CP_WRITE_UCHAR(pjBase, MM_BLT_MODE, val); \
CP_WRITE_UCHAR(pjBase, MM_BLT_EXT, 0); \
}
#define CP_MM_START_REG(ppdev, pjBase, val) \
{ \
CP_WRITE_UCHAR(pjBase, MM_BLT_START_STATUS_REG, val); \
}
#define CP_MM_FG_COLOR(ppdev, pjBase, val) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_FG_COLOR, val); \
}
#define CP_MM_BG_COLOR(ppdev, pjBase, val) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_BG_COLOR, val); \
}
#define CP_MM_XCNT(ppdev, pjBase, val) \
{ \
CP_WRITE_USHORT(pjBase, MM_BLT_WIDTH, val); \
}
#define CP_MM_YCNT(ppdev, pjBase, val) \
{ \
CP_WRITE_USHORT(pjBase, MM_BLT_HEIGHT, val); \
}
#define CP_MM_DST_ADDR(ppdev, pjBase, relval) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_DST_ADDR, (relval) + ppdev->xyOffset); \
}
#define CP_MM_DST_ADDR_ABS(ppdev, pjBase, val) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_DST_ADDR, val); \
}
#define CP_MM_BLT_EXT_MODE(ppdev, pjBase, val) \
{ \
CP_WRITE_UCHAR(pjBase, MM_BLT_EXT, val); \
}
#if 1 // D5480
#define CP_MM_BLT_MODE_PACKED(ppdev, pjBase, val) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_MODE, val); \
}
// Note: The PACKXY_FAST macro is unsafe with negative coordinates
#define PACKXY(x, y) (((y) << 16) | ((x) & 0xffff))
#define PACKXY_FAST(x, y) (((y) << 16) | (x))
#define CP_MM_DST_XY_SAFE(ppdev, pjBase, x, y) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_DST_X, PACKXY((x), (y))); \
}
#define CP_MM_DST_XY(ppdev, pjBase, x, y) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_DST_X, PACKXY_FAST((x), (y))); \
}
#define CP_MM_DST_X(ppdev, pjBase, x) \
{ \
CP_WRITE_USHORT(pjBase, MM_BLT_DST_X, (x)); \
}
#define CP_MM_DST_Y(ppdev, pjBase, y) \
{ \
CP_WRITE_USHORT(pjBase, MM_BLT_DST_Y, (y)); \
}
#define CP_MM_SRC_XY_SAFE(ppdev, pjBase, x, y) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_SRC_X, PACKXY((x), (y))); \
}
#define CP_MM_SRC_XY(ppdev, pjBase, x, y) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_SRC_X, PACKXY_FAST((x), (y))); \
}
#define CP_MM_SRC_XY_PACKED(ppdev, pjBase, xy) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_SRC_X, xy); \
}
#define CP_MM_CLIP_ULXY_SAFE(ppdev, pjBase, x, y) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_CLIP_ULX, PACKXY((x), (y))); \
}
#define CP_MM_CLIP_ULXY(ppdev, pjBase, x, y) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_CLIP_ULX, PACKXY_FAST((x), (y))); \
}
#define CP_MM_CLIP_LRXY_SAFE(ppdev, pjBase, x, y) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_CLIP_LRX, PACKXY((x), (y))); \
}
#define CP_MM_CLIP_LRXY(ppdev, pjBase, x, y) \
{ \
CP_WRITE_ULONG(pjBase, MM_BLT_CLIP_LRX, PACKXY_FAST((x), (y))); \
}
#endif // endif D5480
////////////////////////////////////////////////////////////////////////////////
// Blt engine IO register access macros //
////////////////////////////////////////////////////////////////////////////////
#define CP_IO_ACL_STAT(ppdev, pjPorts) \
( \
CP_OUT_BYTE(pjPorts, INDEX_REG, IO_BLT_START_STATUS_REG), \
CP_IN_BYTE(pjPorts, DATA_REG) \
)
#define CP_IO_ROP(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, IO_BLT_ROP | ((val) << 8)); \
}
#define CP_IO_SRC_Y_OFFSET(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_SRC_PITCH_HIGH | ((val) & 0xff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_SRC_PITCH_LOW | (((val) & 0x00ff) << 8)); \
}
#define CP_IO_DST_Y_OFFSET(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_PITCH_HIGH | ((val) & 0xff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_PITCH_LOW | (((val) & 0x00ff) << 8)); \
}
#define CP_IO_SRC_ADDR(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_SRC_ADDR_HIGH | (((val) & 0xff0000) >> 8)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_SRC_ADDR_MID | (((val) & 0x00ff00))); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_SRC_ADDR_LOW | (((val) & 0x0000ff) << 8)); \
}
#define CP_IO_BLT_MODE(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, IO_BLT_MODE | ((val) << 8)); \
}
#define CP_IO_START_REG(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_START_STATUS_REG | ((val) << 8)); \
}
#define CP_IO_FG_COLOR(ppdev, pjPorts, val) \
{ \
if (ppdev->flCaps & CAPS_TRUE_COLOR) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_FG_COLOR_BYTE_3 | (((val) & 0xff000000) >> 16)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_FG_COLOR_BYTE_2 | (((val) & 0x00ff0000) >> 8)); \
} \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_FG_COLOR_BYTE_1 | ((val) & 0x0000ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_FG_COLOR_BYTE_0 | (((val) & 0x000000ff) << 8)); \
}
#define CP_IO_BG_COLOR(ppdev, pjPorts, val) \
{ \
if (ppdev->flCaps & CAPS_TRUE_COLOR) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_BG_COLOR_BYTE_3 | (((val) & 0xff000000) >> 16)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_BG_COLOR_BYTE_2 | (((val) & 0x00ff0000) >> 8)); \
} \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_BG_COLOR_BYTE_1 | ((val) & 0x0000ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_BG_COLOR_BYTE_0 | (((val) & 0x000000ff) << 8)); \
}
#define CP_IO_XCNT(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_WIDTH_HIGH | ((val) & 0xff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_WIDTH_LOW | (((val) & 0x00ff) << 8)); \
}
#define CP_IO_YCNT(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_HEIGHT_HIGH | ((val) & 0xff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_HEIGHT_LOW | (((val) & 0x00ff) << 8)); \
}
#define CP_IO_DST_ADDR(ppdev, pjPorts, relval) \
{ \
LONG val = ((relval) + ppdev->xyOffset); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_ADDR_HIGH | (((val) & 0xff0000) >> 8)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_ADDR_MID | ((val) & 0x00ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_ADDR_LOW | (((val) & 0x0000ff) << 8)); \
}
#define CP_IO_DST_ADDR_ABS(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_ADDR_HIGH | (((val) & 0xff0000) >> 8)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_ADDR_MID | ((val) & 0x00ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_ADDR_LOW | (((val) & 0x0000ff) << 8)); \
}
#if 1 // D5480
#define CP_IO_BLT_EXT_MODE(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, (IO_BLT_EXT_MODE | ((val)<<8))); \
}
#define CP_IO_DST_XY(ppdev, pjPorts, x, y) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_X_HIGH | ((x) & 0x00ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_X_LOW | (((x) & 0x0000ff) << 8)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_Y_HIGH | ((y) & 0x00ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_Y_LOW | (((y) & 0x0000ff) << 8)); \
}
#define CP_IO_DST_X(ppdev, pjPorts, x) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_X_HIGH | ((x) & 0x00ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_X_LOW | (((x) & 0x0000ff) << 8)); \
}
#define CP_IO_DST_Y(ppdev, pjPorts, y) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_Y_HIGH | ((y) & 0x00ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_DST_Y_LOW | (((y) & 0x0000ff) << 8)); \
}
#define CP_IO_SRC_XY(ppdev, pjPorts, x, y) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_SRC_X_HIGH | ((x) & 0x00ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_SRC_X_LOW | (((x) & 0x0000ff) << 8)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_SRC_Y_HIGH | ((y) & 0x00ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_SRC_Y_LOW | (((y) & 0x0000ff) << 8)); \
}
#define CP_IO_CLIP_ULXY(ppdev, pjPorts, x, y) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_CLIP_ULX_HIGH | ((x) & 0x00ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_CLIP_ULX_LOW | (((x) & 0x0000ff) << 8)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_CLIP_ULY_HIGH | ((y) & 0x00ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_CLIP_ULY_LOW | (((y) & 0x0000ff) << 8)); \
}
#define CP_IO_CLIP_LRXY(ppdev, pjPorts, x, y) \
{ \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_CLIP_LRX_HIGH | ((x) & 0x00ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_CLIP_LRX_LOW | (((x) & 0x0000ff) << 8)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_CLIP_LRY_HIGH | ((y) & 0x00ff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_CLIP_LRY_LOW | (((y) & 0x0000ff) << 8)); \
}
#endif // endif D5480
////////////////////////////////////////////////////////////////////////////////
// Hardware registers //
////////////////////////////////////////////////////////////////////////////////
#if 1 // D5480
#define ENABLE_SOLID_FILL_PACKED 0x04000000
#define INVERT_SOURCE_PACKED 0x02000000
#define SOURCE_GRANULARITY_PACKED 0x01000000
#define ENABLE_COMMAND_LIST_PACKED 0x80000000
#define ENABLE_XY_POSITION_PACKED 0x40000000
#define ENABLE_CLIP_RECT_PACKED 0x20000000
#endif // endif D5480
#if 1 // D5480
#define ENABLE_COMMAND_LIST 0x80
#define ENABLE_XY_POSITION 0x40
#define ENABLE_CLIP_RECT 0x20
#endif // endif D5480
#define ENABLE_COLOR_EXPAND 0x80
#define ENABLE_8x8_PATTERN_COPY 0x40
#define SET_16BPP_COLOR 0x10
#define SET_24BPP_COLOR 0x20
#define SET_32BPP_COLOR 0x30
#define ENABLE_TRANSPARENCY_COMPARE 0x08
#define SRC_CPU_DATA 0x04
#define DST_CPU_DATA 0x02
#define DECREMENT_BLT_ADDRESS 0x01
#define ENABLE_SOLID_FILL 0x04
#define INVERT_SOURCE 0x02
#define SOURCE_GRANULARITY 0x01
#define IO_BLT_XPAR_COLOR_LOW 0x34
#define IO_BLT_XPAR_COLOR_HIGH 0x35
#define IO_BLT_XPAR_COLOR_MASK_LOW 0x38
#define IO_BLT_XPAR_COLOR_MASK_HIGH 0x39
#define IO_BLT_BG_COLOR_BYTE_0 0x00
#define IO_BLT_BG_COLOR_BYTE_1 0x10
#define IO_BLT_BG_COLOR_BYTE_2 0x12
#define IO_BLT_BG_COLOR_BYTE_3 0x14
#define IO_BLT_FG_COLOR_BYTE_0 0x01
#define IO_BLT_FG_COLOR_BYTE_1 0x11
#define IO_BLT_FG_COLOR_BYTE_2 0x13
#define IO_BLT_FG_COLOR_BYTE_3 0x15
#define IO_BLT_WIDTH_LOW 0x20
#define IO_BLT_WIDTH_HIGH 0x21
#define IO_BLT_HEIGHT_LOW 0x22
#define IO_BLT_HEIGHT_HIGH 0x23
#define IO_BLT_DST_PITCH_LOW 0x24
#define IO_BLT_DST_PITCH_HIGH 0x25
#define IO_BLT_SRC_PITCH_LOW 0x26
#define IO_BLT_SRC_PITCH_HIGH 0x27
#define IO_BLT_DST_ADDR_LOW 0x28
#define IO_BLT_DST_ADDR_MID 0x29
#define IO_BLT_DST_ADDR_HIGH 0x2A
#define IO_BLT_SRC_ADDR_LOW 0x2C
#define IO_BLT_SRC_ADDR_MID 0x2D
#define IO_BLT_SRC_ADDR_HIGH 0x2E
#define IO_BLT_MODE 0x30
#define IO_BLT_ROP 0x32
#define IO_BLT_START_STATUS_REG 0x31
#if 1 // D5480
#define IO_BLT_EXT_MODE 0x33
#define IO_BLT_DST_X_LOW 0x40
#define IO_BLT_DST_X_HIGH 0x41
#define IO_BLT_DST_Y_LOW 0x42
#define IO_BLT_DST_Y_HIGH 0x43
#define IO_BLT_SRC_X_LOW 0x44
#define IO_BLT_SRC_X_HIGH 0x45
#define IO_BLT_SRC_Y_LOW 0x46
#define IO_BLT_SRC_Y_HIGH 0x47
#define IO_BLT_CLIP_ULX_LOW 0x48
#define IO_BLT_CLIP_ULX_HIGH 0x49
#define IO_BLT_CLIP_ULY_LOW 0x4A
#define IO_BLT_CLIP_ULY_HIGH 0x4B
#define IO_BLT_CLIP_LRX_LOW 0x4C
#define IO_BLT_CLIP_LRX_HIGH 0x4D
#define IO_BLT_CLIP_LRY_LOW 0x4E
#define IO_BLT_CLIP_LRY_HIGH 0x4F
#endif // endif D5480
#define MM_BLT_BG_COLOR 0x00
#define MM_BLT_FG_COLOR 0x04
#define MM_BLT_WIDTH 0x08
#define MM_BLT_HEIGHT 0x0A
#define MM_BLT_DST_PITCH 0x0C
#define MM_BLT_SRC_PITCH 0x0E
#define MM_BLT_DST_ADDR 0x10
#define MM_BLT_SRC_ADDR 0x14
#define MM_BLT_DST_WRITE_MASK 0x17
#define MM_BLT_MODE 0x18
#define MM_BLT_ROP 0x1A
#define MM_BLT_EXT 0x1B
#define MM_BLT_COLOR_KEY 0x1C
#define MM_BLT_START_STATUS_REG 0x40
#if 1 // D5480
#define MM_BLT_DST_X 0x28
#define MM_BLT_DST_Y 0x2A
#define MM_BLT_SRC_X 0x2C
#define MM_BLT_SRC_Y 0x2E
#define MM_BLT_CLIP_ULX 0x30
#define MM_BLT_CLIP_LRX 0x34
#endif // endif D5480
#define DIR_TBLR 0x00 // Top-Bottom, Left-Right
#define DIR_BTRL 0x01 // Bottom-Top, Right-Left
#define BLT_AUTO_START 0x80
#define BLT_SECOND_APERTURE 0x40 // second aperture, sge01
#define BLT_PROGRESS_STATUS 0x08
#define BLT_RESET 0x04
#define BLT_START 0x02
#define BLT_SUSPEND 0x02
#define BLT_STATUS 0x01
////////////////////////////////////////////////////////////////////////////////
// Some handy clipping control structures //
////////////////////////////////////////////////////////////////////////////////
typedef struct {
ULONG c;
RECTL arcl[8];
} ENUMRECTS8, *PENUMRECTS8;
//
// The following two macros touch registers which are only available
// on the 5446 and 5480. Only set these registers if we are on one
// of these chips.
//
#define CP_IO_XPAR_COLOR(ppdev, pjPorts, val) \
{ \
if (ppdev->flCaps & CAPS_TRANSPARENCY) { \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_XPAR_COLOR_HIGH | ((val) & 0xff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_XPAR_COLOR_LOW | (((val) & 0x00ff) << 8)); \
} \
}
#define CP_IO_XPAR_COLOR_MASK(ppdev, pjPorts, val) \
{ \
if (ppdev->flCaps & CAPS_TRANSPARENCY) { \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_XPAR_COLOR_MASK_HIGH | ((val) & 0xff00)); \
CP_OUT_WORD(pjPorts, INDEX_REG, \
IO_BLT_XPAR_COLOR_MASK_LOW | (((val) & 0x00ff) << 8)); \
} \
}
////////////////////////////////////////////////////////////////////////////////
// MM IO settings //
////////////////////////////////////////////////////////////////////////////////
#define CP_SET_MM_IO_FLAGS(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, SR_INDEX, (0x17 | (val << 8))); \
}
#define CP_GET_MM_IO_FLAGS(ppdev, pjPorts) \
( \
CP_OUT_BYTE(pjPorts, SR_INDEX, 0x17), \
CP_IN_BYTE(pjPorts, SR_DATA) \
)
#define CP_ENABLE_MM_IO(ppdev, pjPorts) \
{ \
BYTE jAttr; \
ppdev->flCaps |= CAPS_MM_IO; \
jAttr = CP_GET_MM_IO_FLAGS(ppdev, pjPorts); \
jAttr |= 0x4; \
jAttr &= ~0x40; \
CP_SET_MM_IO_FLAGS(ppdev, pjPorts, jAttr); \
}
#define CP_DISABLE_MM_IO(ppdev, pjPorts) \
{ \
BYTE jAttr; \
if (ppdev->flCaps & CAPS_MM_IO) \
{ \
CP_MM_WAIT_FOR_BLT_COMPLETE(ppdev, ppdev->pjBase); \
} \
else \
{ \
CP_IO_WAIT_FOR_BLT_COMPLETE(ppdev, pjPorts); \
} \
ppdev->flCaps &= ~CAPS_MM_IO; \
jAttr = CP_GET_MM_IO_FLAGS(ppdev, pjPorts); \
jAttr &= ~0x4; \
CP_SET_MM_IO_FLAGS(ppdev, pjPorts, jAttr); \
}
#define WAIT_COUNT 0x100000
// #if DBG //DBG
#if (DBG_STRESS_FAILURE || DBG)
#define WAIT_BUSY_BLT(ppdev, pjBase) \
{ \
ULONG ul = 0; \
do \
{ \
ul++; \
if (ul >= WAIT_COUNT) \
{ \
DISPDBG((0, "WAIT_BUSY_BLT timeout" \
" file(%s) line(%d)", __FILE__, __LINE__)); \
DISPDBG((0, "Last start blt was at file(%s) line(%d)", \
glpszLastBltFile, gulLastBltLine)); \
DISPDBG((0, "press 'g' to continue...")); EngDebugBreak(); \
ul = 0; \
} \
} while (CP_MM_ACL_STAT(ppdev, pjBase) & 0x10); \
}
extern ULONG gulLastBltLine;
extern CHAR * glpszLastBltFile;
extern BOOL gbResetOnTimeout;
////////////////////////////////////////////////////////////////////////////
// Wait for the Blt Operation to Complete //
////////////////////////////////////////////////////////////////////////////
#define CP_IO_WAIT_FOR_BLT_COMPLETE(ppdev, pjPorts) \
{ \
ULONG ul = 0; \
do \
{ \
ul++; \
if (ul >= WAIT_COUNT) \
{ \
DISPDBG((0, "WAIT_FOR_BLT_COMPLETE timeout" \
" file(%s) line(%d)", __FILE__, __LINE__)); \
DISPDBG((0,"Last start blt was at file(%s) line(%d)", \
glpszLastBltFile, gulLastBltLine)); \
DISPDBG((0, "press 'g' to continue...")); EngDebugBreak(); \
ul = 0; \
if (gbResetOnTimeout) \
{ \
CP_IO_START_REG(ppdev, pjPorts, BLT_RESET); \
} \
} \
} while (CP_IO_ACL_STAT(ppdev, pjPorts) & BLT_STATUS); \
}
#define CP_MM_WAIT_FOR_BLT_COMPLETE(ppdev, pjBase) \
{ \
ULONG ul = 0; \
do \
{ \
ul++; \
if (ul >= WAIT_COUNT) \
{ \
DISPDBG((0, "WAIT_FOR_BLT_COMPLETE timeout" \
" file(%s) line(%d)", __FILE__, __LINE__)); \
DISPDBG((0, "Last start blt was at file(%s) line(%d)", \
glpszLastBltFile, gulLastBltLine)); \
DISPDBG((0, "press 'g' to continue...")); EngDebugBreak(); \
ul = 0; \
if (gbResetOnTimeout) \
{ \
CP_MM_START_REG(ppdev, pjBase, BLT_RESET); \
} \
} \
} while (CP_MM_ACL_STAT(ppdev, pjBase) & BLT_STATUS); \
}
////////////////////////////////////////////////////////////////////////////
// Start the Blt Operation - save debug info //
////////////////////////////////////////////////////////////////////////////
#define CP_IO_START_BLT(ppdev, pjPorts) \
{ \
DISPDBG((5, "START_BLT file(%s) line(%d)", __FILE__, __LINE__)); \
gulLastBltLine = __LINE__; \
glpszLastBltFile = __FILE__; \
CP_IO_START_REG(ppdev, pjPorts, BLT_START); \
}
#define CP_MM_START_BLT(ppdev, pjBase) \
{ \
DISPDBG((5, "START_BLT file(%s) line(%d)", __FILE__, __LINE__)); \
gulLastBltLine = __LINE__; \
glpszLastBltFile = __FILE__; \
if (!(ppdev->flCaps & CAPS_AUTOSTART)) \
{ \
CP_MM_START_REG(ppdev, pjBase, BLT_START); \
} \
}
#else
#define WAIT_BUSY_BLT(ppdev, pjBase) \
while (CP_MM_ACL_STAT(ppdev, pjBase) & 0x10)
////////////////////////////////////////////////////////////////////////////
// Wait for the Blt Operation to Complete //
////////////////////////////////////////////////////////////////////////////
#define CP_IO_WAIT_FOR_BLT_COMPLETE(ppdev, pjPorts) \
{ \
while (CP_IO_ACL_STAT(ppdev, pjPorts) & BLT_STATUS); \
}
#define CP_MM_WAIT_FOR_BLT_COMPLETE(ppdev, pjBase) \
{ \
while (CP_MM_ACL_STAT(ppdev, pjBase) & BLT_STATUS); \
}
////////////////////////////////////////////////////////////////////////////
// Start the Blt Operation //
////////////////////////////////////////////////////////////////////////////
#define CP_IO_START_BLT(ppdev, pjPorts) \
{ \
CP_IO_START_REG(ppdev, pjPorts, BLT_START); \
}
#define CP_MM_START_BLT(ppdev, pjBase) \
{ \
if (!(ppdev->flCaps & CAPS_AUTOSTART)) \
{ \
CP_MM_START_REG(ppdev, pjBase, BLT_START); \
} \
}
#endif
////////////////////////////////////////////////////////////////////////////////
// TRANSFER_DWORD //
// 32-bit transfers to host transfer buffer, the source has to be aligned //
////////////////////////////////////////////////////////////////////////////////
#define TRANSFER_DWORD_ALIGNED(ppdev, pulXfer, p, c) \
{ \
ULONG mcd = (ULONG)(c); \
ULONG* mpdSrc = (ULONG*) (p); \
ASSERTDD((((ULONG_PTR) p) & 3) == 0, "Transfer not dword aligned"); \
ASSERTDD((c) > 0, "Can't have a zero transfer count"); \
\
CP_EIEIO(); \
do { \
CP_MEMORY_BARRIER(); \
/* *pulXfer = *mpdSrc++; */ \
WRITE_REGISTER_ULONG((PULONG)(pulXfer), *mpdSrc); \
mpdSrc++; \
} while (--mcd); \
}
////////////////////////////////////////////////////////////////////////////////
// TRANSFER_DWORD //
// 32-bit transfers to host transfer buffer, the source has not to be aligned //
////////////////////////////////////////////////////////////////////////////////
#define TRANSFER_DWORD(ppdev, pulXfer, p, c) \
{ \
ULONG mcd = (c); \
ULONG UNALIGNED* mpdSrc = (ULONG*) (p); \
ASSERTDD((c) > 0, "Can't have a zero transfer count"); \
\
CP_EIEIO(); \
do { \
CP_MEMORY_BARRIER(); \
/* *pulXfer = *mpdSrc++; */ \
WRITE_REGISTER_ULONG((PULONG)(pulXfer), *mpdSrc); \
mpdSrc++; \
} while (--mcd); \
}
#if 1 // D5480
////////////////////////////////////////////////////////////////////////////////
// Command List stuff //
////////////////////////////////////////////////////////////////////////////////
#define COMMAND_TOTAL_PACKETS 127 // We support 128 packets.
#define COMMAND_BUFFER_SIZE 4096
#define COMMAND_BUFFER_ALIGN 255
#define COMMAND_LAST_PACKET 0x80000000
#define COMMAND_DISCARD_SRC 0x40000000
#define COMMAND_FOURTH_NOTHING 0x30000000
#define COMMAND_FOURTH_BLT_ROP 0x10000000
#define COMMAND_FOURTH_DST_SRC 0x00000000
#define COMMAND_NOSRC_NOTHING 0x70000000
#define CP_MM_CL_SWITCH(ppdev) \
{ \
if( ppdev->pCommandList == ppdev->pCLFirst ) \
ppdev->pCommandList = ppdev->pCLSecond; \
else \
ppdev->pCommandList = ppdev->pCLFirst; \
}
#endif // endif D5480
////////////////////////////////////////////////////////////////////////////////
// Pointer stuff //
////////////////////////////////////////////////////////////////////////////////
#define SPRITE_BUFFER_SIZE 256
#define POINTER_X_POSITION 0x10
#define POINTER_Y_POSITION 0x11
#define POINTER_ATTRIBUTES 0x12
#define POINTER_OFFSET 0x13
#define ENABLE_POINTER 0x01
#define ALLOW_DAC_ACCESS_TO_EXT_COLORS 0x02
#define POINTER_SIZE_64x64 0x04
#define OVERSCAN_COLOR_PROTECT 0x80
#define POINTER_X_SHIFT 0x01
#define POINTER_Y_SHIFT 0x02
#define POINTER_SHAPE_RESET 0x04
#define POINTER_DISABLED 0x08
#define CP_PTR_XY_POS(ppdev, pjPorts, x, y) \
{ \
DISPDBG((10, "\t CP_PTR_XY_POS (%d,%d)", x, y)); \
CP_OUT_WORD(pjPorts, SR_INDEX, \
(POINTER_Y_POSITION | ((y & 0x7) << 5)) | ((y & 0x7f8) << 5)); \
CP_OUT_WORD(pjPorts, SR_INDEX, \
(POINTER_X_POSITION | ((x & 0x7) << 5)) | ((x & 0x7f8) << 5)); \
/* [HWBUG] - must set position twice */ \
CP_OUT_WORD(pjPorts, SR_INDEX, \
(POINTER_Y_POSITION | ((y & 0x7) << 5)) | ((y & 0x7f8) << 5)); \
CP_OUT_WORD(pjPorts, SR_INDEX, \
(POINTER_X_POSITION | ((x & 0x7) << 5)) | ((x & 0x7f8) << 5)); \
}
#define CP_PTR_SET_FLAGS(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, SR_INDEX, POINTER_ATTRIBUTES | (val << 8)); \
}
#define CP_PTR_GET_FLAGS(ppdev, pjPorts) \
( \
CP_OUT_BYTE(pjPorts, SR_INDEX, POINTER_ATTRIBUTES), \
CP_IN_BYTE(pjPorts, SR_DATA) \
)
#define CP_PTR_ADDR(ppdev, pjPorts, val) \
{ \
CP_OUT_WORD(pjPorts, SR_INDEX, POINTER_OFFSET | (val << 8)); \
}
#define CP_PTR_ENABLE(ppdev, pjPorts) \
{ \
BYTE jAttr; \
DISPDBG((10, "\t CP_PTR_ENABLE")); \
if (ppdev->flPointer & POINTER_DISABLED) \
{ \
ppdev->flPointer &= ~POINTER_DISABLED; \
jAttr = CP_PTR_GET_FLAGS(ppdev, pjPorts); \
jAttr |= ENABLE_POINTER; \
CP_PTR_SET_FLAGS(ppdev, pjPorts, jAttr); \
DISPDBG((10, "\t CP_PTR_ENABLE - done")); \
} \
}
#define CP_PTR_DISABLE(ppdev, pjPorts) \
{ \
BYTE jAttr; \
DISPDBG((10, "\t CP_PTR_DISABLE")); \
if (!(ppdev->flPointer & POINTER_DISABLED)) \
{ \
ppdev->flPointer |= POINTER_DISABLED; \
jAttr = CP_PTR_GET_FLAGS(ppdev, pjPorts); \
jAttr &= ~ENABLE_POINTER; \
CP_PTR_SET_FLAGS(ppdev, pjPorts, jAttr); \
CP_PTR_XY_POS(ppdev, pjPorts, 2047, 2047); \
DISPDBG((10, "\t CP_PTR_DISABLE - done")); \
} \
}
////////////////////////////////////////////////////////////////////////////////
// ROP definitions for the hardware //
////////////////////////////////////////////////////////////////////////////////
#define R3_BLACKNESS 0x00 // dest = BLACK
#define R3_NOTSRCERASE 0x11 // dest = (NOT src) AND (NOT dest)
#define R3_NOTSRCCOPY 0x33 // dest = (NOT source)
#define R3_SRCERASE 0x44 // dest = source AND (NOT dest )
#define R3_DSTINVERT 0x55 // dest = (NOT dest)
#define R3_PATINVERT 0x5A // dest = pattern XOR dest
#define R3_SRCINVERT 0x66 // dest = source XOR dest
#define R3_SRCAND 0x88 // dest = source AND dest
#define R3_NOP 0xAA // dest = dest
#define R3_MERGEPAINT 0xBB // dest = (NOT source) OR dest
#define R3_MERGECOPY 0xC0 // dest = (source AND pattern)
#define R3_SRCCOPY 0xCC // dest = source
#define R3_SRCPAINT 0xEE // dest = source OR dest
#define R3_PATCOPY 0xF0 // dest = pattern
#define R3_PATPAINT 0xFB // dest = DPSnoo
#define R3_WHITENESS 0xFF // dest = WHITE
#define R4_BLACKNESS 0x0000 // dest = BLACK
#define R4_NOTSRCERASE 0x1111 // dest = (NOT src) AND (NOT dest)
#define R4_NOTSRCCOPY 0x3333 // dest = (NOT source)
#define R4_SRCERASE 0x4444 // dest = source AND (NOT dest )
#define R4_DSTINVERT 0x5555 // dest = (NOT dest)
#define R4_PATINVERT 0x5A5A // dest = pattern XOR dest
#define R4_SRCINVERT 0x6666 // dest = source XOR dest
#define R4_SRCAND 0x8888 // dest = source AND dest
#define R4_MERGEPAINT 0xBBBB // dest = (NOT source) OR dest
#define R4_MERGECOPY 0xC0C0 // dest = (source AND pattern)
#define R4_SRCCOPY 0xCCCC // dest = source
#define R4_SRCPAINT 0xEEEE // dest = source OR dest
#define R4_PATCOPY 0xF0F0 // dest = pattern
#define R4_PATPAINT 0xFBFB // dest = DPSnoo
#define R4_WHITENESS 0xFFFF // dest = WHITE
#define HW_0 0x00
#define HW_1 0x0E
#define HW_P 0x0D
#define HW_D 0x06
#define HW_Pn 0xD0
#define HW_Dn 0x0B
#define HW_DPa 0x05
#define HW_PDna 0x09
#define HW_DPna 0x50
#define HW_DPon 0x90
#define HW_DPo 0x6D
#define HW_PDno 0xAD
#define HW_DPno 0xD6
#define HW_DPan 0xDA
#define HW_DPx 0x59
#define HW_DPxn 0x95
#define CL_BLACKNESS HW_0
#define CL_WHITENESS HW_1
#define CL_SRC_COPY HW_P
#define CL_DST HW_D
#define CL_NOT_SRC_COPY HW_Pn
#define CL_DST_INVERT HW_Dn
#define CL_SRC_AND HW_DPa
#define CL_SRC_ERASE HW_PDna
#define CL_NOT_SRC_OR_DST HW_DPna
#define CL_NOT_SRC_ERASE HW_DPon
#define CL_SRC_PAINT HW_DPo
#define CL_SRC_AND_NOT_DST HW_PDno
#define CL_MERGE_PAINT HW_DPno
#define CL_NOT_SRC_AND_NOT_DST HW_DPan
#define CL_SRC_INVERT HW_DPx
#define CL_NOT_SRC HW_PDxn
#if 1 // D5480
#define HW_PACKED_0 0x000000
#define HW_PACKED_1 0x0E0000
#define HW_PACKED_P 0x0D0000
#define HW_PACKED_D 0x060000
#define HW_PACKED_Pn 0xD00000
#define HW_PACKED_Dn 0x0B0000
#define HW_PACKED_DPa 0x050000
#define HW_PACKED_PDna 0x090000
#define HW_PACKED_DPna 0x500000
#define HW_PACKED_DPon 0x900000
#define HW_PACKED_DPo 0x6D0000
#define HW_PACKED_PDno 0xAD0000
#define HW_PACKED_DPno 0xD60000
#define HW_PACKED_DPan 0xDA0000
#define HW_PACKED_DPx 0x590000
#define HW_PACKED_DPxn 0x950000
#define CL_PACKED_BLACKNESS HW_PACKED_0
#define CL_PACKED_WHITENESS HW_PACKED_1
#define CL_PACKED_SRC_COPY HW_PACKED_P
#define CL_PACKED_DST HW_PACKED_D
#define CL_PACKED_NOT_SRC_COPY HW_PACKED_Pn
#define CL_PACKED_DST_INVERT HW_PACKED_Dn
#define CL_PACKED_SRC_AND HW_PACKED_DPa
#define CL_PACKED_SRC_ERASE HW_PACKED_PDna
#define CL_PACKED_NOT_SRC_OR_DST HW_PACKED_DPna
#define CL_PACKED_NOT_SRC_ERASE HW_PACKED_DPon
#define CL_PACKED_SRC_PAINT HW_PACKED_DPo
#define CL_PACKED_SRC_AND_NOT_DST HW_PACKED_PDno
#define CL_PACKED_MERGE_PAINT HW_PACKED_DPno
#define CL_PACKED_NOT_SRC_AND_NOT_DST HW_PACKED_DPan
#define CL_PACKED_SRC_INVERT HW_PACKED_DPx
#define CL_PACKED_NOT_SRC HW_PACKED_PDxn
#endif // endif D5480