able/windows-nt
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
windows-nt/Source/XPSP1/NT/base/mvdm/wow16/drivers/comm/ibmcom.asm

1948 lines
50 KiB
NASM
Raw Normal View History

Add source files
2020-09-26 03:20:57 -05:00
page,132
;---------------------------Module-Header-------------------------------;
; Module Name: IBMCOM.ASM
;
; !!!
;
; Created: Fri 06-Feb-1987 10:45:12
; Author: Walt Moore [waltm]
;
; Copyright (c) Microsoft Corporation 1985-1990. All Rights Reserved.
;
; General Description:
;
; History:
;
; ***************************************************************
; Tue Dec 19 1989 09:32:15 -by- Amit Chatterjee [amitc]
; ---------------------------------------------------------------
; Modified the 'InitAPort' routine called from 'ReactivateOpenCommPort'.
; If the out queue for a port has characters to send out then we must
; restart the trasmission process by faking a comm interrupt on that
; port.
; ***************************************************************
; Tue Nov 21 1989 09:46:50 -by- Amit Chatterjee [amitc]
; ---------------------------------------------------------------
; The base port addresses in the COMM1,COMM2,COMM3,COMM4 structures
; are being zeroed out when the corresponding comm port is closed.
; This is because the 'ReactivateOpenCommPort' function looks at it
; and if the port address is not zero decides that comm ports are
; open.
; ***************************************************************
; Tue Nov 14 1989 18:42:00 ADDED TWO EXPORTED FUNCTIONS
; ---------------------------------------------------------------
; Added two exported functions 'SuspendOpenCommPorts' and
; 'ReactivateOpenCommPorts' for 286 winoldap support. The first one simply
; releases the comm int vects and installs the originall one, the second one
; hooks back the comm driver comm vectors and then reads the receive buffer,
; the status and the IIR registers of all the available comm ports to
; remove pending interrupts. It also reprograms the PIC to enable interrupts
; on all open comm channels.
; ---------------------------------------------------------------
; -by- Amit Chatterjee [amitc]
; ***************************************************************
; Tue Aug 30 198? 12:52:00 MAJOR FIX TO HANDLE 8250B
; ---------------------------------------------------------------
;
; 8250B has the following peculiar charactersistic
; . The very first time (after reset) the Tx Holding Empty
; interrupt is enabled, an immediate interrupt is generated
;
; . After the first time, switching the Tx Holding Empty
; interrupt enable bit from disabled to enabled will NOT
; generate an immediate interrupt (unlike in 8250)
; Because of this the KICKTX routine fails to set the transmit cycle
; on if the machine has a 8250B
;
; This has been taken care as follows:
; . For the very first byte that is being transmitted, KICKTX
; is used to generate the first Tx Holding Empty interrupt
; . Subsequently, whenever we find that the transmit buffer
; is empty, we use a SOFTWARE INT (either INT 0Bh, or INT 0Ch)
; to force the first character out, once this is done the
; Tx Holding Empty interrupt will be generated once the buffer
; really is empty
; . Now we no longer disable the Tx Holding Empty interrupt
; in the Xmit ISR to ensure that even m/cs with 8250, use
; the software int to kick the tx interrupt on after the
; first time.
; . The software interrupt is also forced whenever an X-ON
; character is received.
;
; The code that implements the above logic is marked out with a line
; asterixes.
; ------------------------------------------------------------------
; -by- Amit Chatterjee [amitc]
; ******************************************************************
;
; 062587 HSFlag and Evtmask in DoLPT. These fields do not exist
; for LPT type devices. The code which manipulated them
; was removed
;
; KickTx from $SndCom - interrupts were not disabled when
; calling KickTx.
;
; $SetCom - added CLD at the start
;
; $SetQue - movsw ==> stosw
;
; 111285 Changed the Timeout from 7 to 30 seconds.
;
; 110885 Forgot to set EV_RxChar event when a character
; was received.
;
; 102985 INS8250, INS8250B bug with enabling interrupts.
; Setting ACE_ETBEI in the Interrupt Enable Register
; will cause an immediate interrupt regardless of
; whether the transmitter register is empty or not.
; The first interrupt MAY also be missed.
;
; The first case is not a problem since we only enable
; interrupts if the transmitter register is empty. The
; second problem was showing up on Microsoft System Cards
; in PC-XTs. The first interrupt was missed after a cold
; boot. National claims the fix is to write the register
; twice, which SEEMS to work...
;
; Added timeout code to $TRMCOM. If the number of
; characters in the output queue doesn't decrease
; in "Timeout" seconds, then the port will be closed
; anyway. Also flushed the input queue and added a
; discard-input flag for the data available interrupt
; code to discard any input received while terminating
; a port. $TRMCOM will return an error code if it
; discarded any output data.
;
; Removed infinite timeout test in MSRWait routine.
; Still bad, but it will timeout around 65 seconds
; instead of never.
;
; 102785 LPT initialization code was jumping to InitCom90,
; which was setting EFlags[si] to null. Well, LPTs
; don't have an EFlags field, so the null was getting
; stuffed over the LSB of BIOSPortLoc of the next LPT
; device.
;
; 101185 Save interrupt vector when opening a comm port
; and restore it when closing. Would you believe
; there are actually programs that assume the
; vector points to a non-specific 8259 ACK and
; an IRET!
;
; 100985 Added MS-NET support to gain exclusive control
; of an LPT port if DOS 3.x and not running in as
; a server, receiver, or messenger. Required to
; keep another application, such as command.com
; from closing the stream or mixing their output
; with ours.
; sudeepb 10-Jan-1993 changed the costly cli/sti with non-trapping
; FCLI/FSTI macros
;-----------------------------------------------------------------------;
title IBMCom - IBM PC, PC-XT, PC-AT, PS/2 Communications Interface
.xlist
include cmacros.inc
include comdev.inc
include ins8250.inc
include ibmcom.inc
include vint.inc
.list
externNP GetDEB
externNP DoLPT
externNP StringToLPT
externNP FindCOMPort
externNP StealPort
sBegin Data
externB $MachineID
sEnd Data
sBegin Code
assumes cs,Code
assumes ds,Data
page
;----------------------------Public Routine-----------------------------;
;
; $RECCOM - Receive Characters From Device
;
; Read Byte From RS232 Input Queue If Data Is Ready
;
; LPT ports will return with an indication that no characters are
; available.
;
; Entry:
; AH = Device ID
; Returns:
; 'Z' clear if data available
; AL = byte
; Error Returns:
; 'Z' Set if error or no data
; AX = error code
; AX = 0 if no data
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public $RECCOM
$RECCOM proc near
push si ;Once again, save some registers
push di
call GetDEB ;Get DEB pointer in SI
jc RecCom10 ;Invalid Port [rkh] ...
jns RecCom20 ;COM port
jmp RecCom95 ;LPT port, return no characters
RecCom10:
jmp RecCom100 ; Invalid Port
; Before removing any charcters from the input queue, check to see
; if XON needs to be issued. If it needs to be issued, set the
; flag that will force it and arm transmit interrupts.
RecCom20:
test [si.DCB_Flags],fEnqAck+fEtxAck ;Enq or Etx Ack?
jz RecCom32 ; No
test HSFlag[si],EnqReceived+HHSDropped ;Enq recvd or lines dropped?
jnz RecCom21 ; No Enq recvd & no lines dropped
jmp RecCom60 ; No Enq recvd & no lines dropped
RecCom21:
jmp short RecCom34
RecCom32:
test HSFlag[si],HSSent ;Handshake sent?
jnz RecCom33 ; No XOFF sent & no lines dropped
jmp RecCom60 ; No XOFF sent & no lines dropped
RecCom33:
RecCom34:
mov ax,QInCount[si] ;Get current count of input chars
cmp ax,[si.DCB_XonLim] ;See if at XOn limit
ja RecCom60 ;Not at XOn limit yet
; If any hardware lines are down, then raise them. Then see
; about sending XON.
mov dx,Port[si] ;Get the port
mov ah,HHSLines[si] ;Get hardware lines mask
call DOCLI ;Handle this as a critical section
mov cl,HSFlag[si] ;Get handshaking flags
or ah,ah ;Any hardware lines to play with?
jz RecCom40 ; No
add dl,ACE_MCR ;--> Modem control register
in al,dx
or al,ah ;Turn on the hardware bits
iodelay
out dx,al
and cl,NOT HHSDropped ;Show hardware lines back up
RecCom40:
test [si.DCB_Flags],fEnqAck+fEtxAck ;Enq or Etx Ack?
jz RecCom47 ; No
test cl,EnqReceived ;Did we receive Enq?
jz RecCom55 ; No
and cl,NOT EnqReceived
jmp short RecCom50
RecCom47:
test cl,XOffSent ;Did we send XOFF?
jz RecCom55 ; No
and cl,NOT XOffSent ;Remove XOFF sent flag
RecCom50:
or cl,XOnPending ;Show XON or ACK must be sent
call KickTx ;Kick xmit if needed
RecCom55:
mov HSFlag[si],cl ;Store handshake flag
call DOSTI ;Can allow interrupts now
; Now we can get down to the business at hand, and remove a character
; from the receive queue. If a communications error exists, we return
; that, and nothing else.
RecCom60:
xor ax,ax
or ax,ComErr[si] ;Any Errors?
jnz RecCom100 ; Yes, return the error code
or ax,QInCount[si] ;Get current input char count
jz RecCom90 ;No characters in the queue
les di,QInAddr[si] ;Get queue pointer
assumes es,nothing
mov bx,QInGet[si] ;Also get the index to head
mov al,es:[bx][di] ;Finally, get byte from queue
inc bx ;Update queue index
cmp bx,QInSize[si] ;See if time for wrap-around
jc RecCom70 ;Jump if no wrap
xor bx,bx ;wrap by zeroing the index
RecCom70:
mov QInGet[si],bx ;Save new head pointer
dec QInCount[si] ;Dec # of bytes in queue
mov cx, [si.QinCount]
cmp cx, [si.RecvTrigger] ;Q: have we read below trigger?
jae RecCom80 ; N:
and [si.NotifyFlagsHI], NOT CN_RECEIVE ; allow timeout notify again
RecCom80:
or sp,sp ;Reset PSW.Z
pop di
pop si
ret
; No characters in the input queue. Check to see if EOF
; was received, and return it if it was. Otherwise show
; no characters.
RecCom90:
test [si.DCB_Flags],fBinary ;Are we doing binary stuff?
jnz RecCom95 ; Yes, show no characters
mov al,[si.DCB_EofChar] ;Assume EOF
test EFlags[si],fEOF ;Has end of file char been received?
jnz RecCom80 ; Yes, show end of file
RecCom95:
xor ax,ax ;Show no more characters
; Return with 'Z' to show error or no characters
RecCom100:
xor cx,cx ;Set PSW.Z
pop di
pop si
ret
$RECCOM endp
page
;----------------------------Public Routine-----------------------------;
;
; $RECSTR - Receive Characters From Device
;
; Read Byte From RS232 Input Queue If Data Is Ready
;
; LPT ports will return with an indication that no characters are
; available.
;
; Entry:
; AH = Device ID
; ES:DI -> receive buffer
; CX max bytes to read
; Returns:
; 'Z' clear if data available
; AX = # of bytes read
; Error Returns:
; 'Z' Set if error or no data
; AX = error code
; AX = 0 if no data
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public $RECSTR
$RECSTR proc near
push si ;Once again, save some registers
push di
call GetDEB ;Get DEB pointer in SI
jc RecStr10 ;Invalid Port [rkh] ...
jns RecStr20 ;COM port
jmp RecStr95 ;LPT port, return no characters
RecStr10:
jmp RecStr100 ; Invalid Port
RecStr15:
jmp RecStr90
RecStr20:
xor ax,ax
or ax,ComErr[si] ;Any Errors?
jnz RecStr10 ; Yes, return the error code
or ax,QInCount[si] ;Get current input char count
jz RecStr15 ;No characters in the queue
cmp cx, ax ;Q: more chars available than can read?
jbe short RecStr30 ; N:
mov cx, ax ; Y: adjust # of chars to read
RecStr30:
push cx
mov dx, QInSize[si]
mov ax, QInGet[si]
sub dx, ax ; dx = # of bytes before end of buf
cmp dx, cx ;Q: more avail than can read?
jbe short RecStr40 ; N:
mov dx, cx ; Y: adjust avail count
RecStr40:
xchg cx, dx ; cx = # of bytes for 1st copy
sub dx, cx ; dx = # of bytes for 2nd copy
push ds
push si
lds bx, QInAddr[si]
mov si, bx
add si, ax ; ds:si -> first char in buffer
cld
rep movsb ; do first copy
mov cx, dx
jcxz short RecStr50 ; jump if no 2nd copy needed
mov si, bx ; ds:si -> start of buffer
rep movsb ; do 2nd copy
RecStr50:
sub si, bx ; si = new QInGet
mov bx, si
pop si
pop ds
pop cx
call DOCLI
mov QInGet[si], bx ; update QInGet
sub QInCount[si], cx ; update count
mov ax, QInCount[si]
call DOSTI
cmp ax, [si.RecvTrigger] ;Q: have we read below trigger?
jae @F ; N:
and [si.NotifyFlagsHI], NOT CN_RECEIVE ; allow timeout notify again
@@:
; Check to see if XON needs to be issued. If it needs to be issued, set the
; flag that will force it and arm transmit interrupts.
test [si.DCB_Flags],fEnqAck+fEtxAck ;Enq or Etx Ack?
jz @F ; No
test HSFlag[si],EnqReceived+HHSDropped ;Enq recvd or lines dropped?
jnz RecStr58 ; No Enq recvd & no lines dropped
jmp RecStr80 ; No Enq recvd & no lines dropped
RecStr58:
jmp short RecStr60
@@:
test HSFlag[si],HSSent ;Handshake sent?
jnz RecStr59 ; No XOFF sent & no lines dropped
jmp RecStr80 ; No XOFF sent & no lines dropped
RecStr59:
RecStr60:
;ax = current count of input chars
cmp ax,[si.DCB_XonLim] ;See if at XOn limit
ja RecStr80 ;Not at XOn limit yet
;; int 1
; If any hardware lines are down, then raise them. Then see
; about sending XON.
mov dx,Port[si] ;Get the port
mov ah,HHSLines[si] ;Get hardware lines mask
push cx
call DOCLI ;Handle this as a critical section
mov cl,HSFlag[si] ;Get handshaking flags
or ah,ah ;Any hardware lines to play with?
jz @F ; No
add dl,ACE_MCR ;--> Modem control register
in al,dx
or al,ah ;Turn on the hardware bits
iodelay
out dx,al
and cl,NOT HHSDropped ;Show hardware lines back up
@@:
test [si.DCB_Flags],fEnqAck+fEtxAck ;Enq or Etx Ack?
jz @F ; No
test cl,EnqReceived ;Did we receive Enq?
jz RecStr70 ; No
and cl,NOT EnqReceived
jmp short RecStr65
@@:
test cl,XOffSent ;Did we send XOFF?
jz RecStr70 ; No
and cl,NOT XOffSent ;Remove XOFF sent flag
RecStr65:
or cl,XOnPending ;Show XON or ACK must be sent
call KickTx ;Kick xmit if needed
RecStr70:
mov HSFlag[si],cl ;Store handshake flag
call DOSTI ;Can allow interrupts now
pop cx
RecStr80:
mov ax, cx
or sp,sp ;Reset PSW.Z
pop di
pop si
ret
; No characters in the input queue. Check to see if EOF
; was received, and return it if it was. Otherwise show
; no characters.
RecStr90:
test [si.DCB_Flags],fBinary ;Are we doing binary stuff?
jnz RecStr95 ; Yes, show no characters
mov al,[si.DCB_EofChar] ;Assume EOF
test EFlags[si],fEOF ;Has end of file char been received?
jnz RecStr80 ; Yes, show end of file
RecStr95:
xor ax,ax ;Show no more characters
; Return with 'Z' to show error or no characters
RecStr100:
xor cx,cx ;Set PSW.Z
pop di
pop si
ret
$RECSTR endp
page
;----------------------------Public Routine-----------------------------;
;
; $SNDIMM - Send A Character Immediately
;
; This routine either sends a character to the port immediately,
; or places the character in a special location which is used by
; the next transmit interrupt to transmit the character prior to
; those in the normal transmit queue.
;
; For LPT ports, the character is always sent immediately.
;
; Entry:
; AH = Device ID
; AL = Character
; Returns:
; AX = 0
; Error Returns:
; AX = 8000H if Bad ID
; AX = 4000H if couldn't send because another character
; transmitted "immediately" is waiting to be sent
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public $SNDIMM
$SNDIMM proc near
push si
call GetDEB ;Get pointer to the DEB
jc SendImm20 ;Bad ID, return an error
jns SendImm10 ;Its a COM port
; For LPT ports, call DoLPT to do the dirty work. If DoLPT
; returns an error code, map it to 4000h.
xor ch,ch ;Show xmit character
call DoLPT ;Do the work here
or ax,ax ;Error occur?
jz SendImm20 ; No, show all is OK
mov ax,4000h ; Yes, return 4000h
jmp short SendImm20
SendImm10:
mov dl, al
mov ax,4000h ;In case we cannot send
test EFlags[si],fTxImmed ;Another char waiting "immediately"?
jnz SendImm20 ; Yes, return error
mov ah,dl ;Set char for TXI
call DOCLI ;TXI is critical section code
call TXI ;Set character to tx immediately
call DOSTI
xor ax,ax ;Show all is OK
SendImm20:
pop si
ret
$SNDIMM endp
page
;----------------------------Public Routine-----------------------------;
;
; $SNDCOM - Send Byte To Port
;
; The given byte is sent to the passed port if possible.
; If the output queue is full, an error will be returned.
;
; Entry:
; AH = Device ID
; AL = Character
; Returns:
; AX = 0
; Error Returns:
; AX = error code
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public $SNDCOM
$SNDCOM proc near
push si
push di
call GetDEB ;--> DEB
jc SendCom40 ;Invalid ID
jns SendCom20 ;Its a COM port
; Handle the transmission of a LPT character. The ROM BIOS int 17
; call will be made to do the transmission. The port address will
; be restored during the call, then zeroed out upon return.
SendCom10:
xor ch,ch ;Show xmit character
call DoLPT ;Do the work here
jmp short SendCom40 ;Return the status to caller
; Send a character to a COM port. Return an error if control
; line timeout occurs or there is no room in the output queue.
SendCom20:
push ax ;Save character
call MSRWait ;See if lines are correct for output
pop ax ;Restore char
jnz SendCom60 ;Timeout occured, return error
mov cx,QOutSize[si] ;See if queue is full
cmp cx,QOutCount[si]
jle SendCom50 ;There is no room in the queue
les di,QOutAddr[si] ;--> output queue
assumes es,nothing
mov bx,QOutPut[si] ;Get index into queue
mov es:[bx][di],al ;Store the byte
inc bx ;Update index
cmp bx,cx ;Wrap time?
jc SendCom30 ; No
xor bx,bx ;Wrap-around is a new zero pointer
SendCom30:
call DOCLI
mov QOutPut[si],bx ;Store updated pointer
mov ax,QOutCount[si] ; get the count
inc ax ; have the updated value in AX for test later
mov QOutCount[si],ax ;Update queue population
call KickTx ;Make sure xmit interrupt is armed
call DOSTI
xor ax,ax ;Show no error (that we know of)
;****************************************************************************
SendCom40:
pop di
pop si
ret
SendCom50:
or by ComErr+1[si],HIGH CE_TXFULL
.errnz LOW CE_TXFULL
SendCom60:
mov ax,ComErr[si] ;Return error code to caller
jmp short SendCom40
$SNDCOM endp
page
;----------------------------Public Routine-----------------------------;
;
; $SNDCOMSTR - Send buffer To Port
;
; The given buffer is sent to the passed port if possible.
; Once the output queue is detected as being full, a CE_TXFULL error
; will be indicated and AX will be returned as the # of chars actually
; queued.
;
; Entry:
; DS:SI --> DEB
; ES:DI --> buffer
; Returns:
; AX = # of bytes queued
; Registers Destroyed:
; AX,BX,CX,DX,DI,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public $SNDCOMSTR
$SNDCOMSTR proc near
push cx ; save count
call GetDEB
jc cws_error ; jump if id invalid
jns cws_comm ; jump if COM port
call StringToLPT
pop cx ; discard saved count, ax = # transfered
jmp short cws_exit
cws_error:
pop ax
sub ax, cx ; ax = # transfered
cws_exit:
ret
cws_comm:
call MSRWait ;See if lines are correct for output
pop cx
push cx
jnz cws_error ;Timeout occured, return error
mov dx, QOutSize[si] ;See if queue is full
sub dx, QOutCount[si] ; dx = # of chars free in queue
jg scs_loop
jmp scs_full ;There is no room in the queue
scs_loop:
push cx ; save count left to send
cmp cx, dx ;Q: room for buffer in queue?
jbe @f ; Y:
mov cx, dx ; N: adjust size to send
@@:
push cx ; save # of chars which will be copied
push si
push ds
push di
push es
les bx,QOutAddr[si] ;--> output queue
assumes es,nothing
mov dx, QOutSize[si]
mov di, QOutPut[si] ;Get index into queue
sub dx, di ; dx = # of free chars before end of queue
cmp dx, cx
jbe @f
mov dx, cx
@@:
xchg cx, dx ; cx = # of chars for 1st copy
sub dx, cx ; dx = # of chars for 2nd copy
pop ds
pop si ; ds:si -> src buffer
assumes ds,nothing
add di, bx ; es:di -> current pos in queue
cld
rep movsb ; copy first section
mov cx, dx
jcxz @F
mov di, bx ; circle back to start of queue
rep movsb ; copy 2nd section
@@:
sub di, bx ; di last index into queue
mov dx, di
mov di, si ; last location in src buffer
mov si, ds
mov es, si ; es:di -> last loc in src buf
pop ds
pop si ; ds:si -> ComDEB
assumes ds,data
pop bx ; # of chars copied
call DOCLI
mov QOutPut[si], dx ;new index into queue
add QOutCount[si], bx
call KickTx
call DOSTI
pop cx
sub cx, bx ; # of chars left to send
jnz scs_full_2 ; jump if none
scs_exit:
pop ax
sub ax, cx ; ax = # transfered
ret
scs_full:
call DOCLI
call KickTx
call DOSTI
scs_full_2:
or by ComErr+1[si],HIGH CE_TXFULL
.errnz LOW CE_TXFULL
jmp scs_exit
$SNDCOMSTR endp
page
;----------------------------Public Routine-----------------------------;
;
; $FLUSH - Flush The Input and Output Queues
;
; This is a hard initialization of the transmit and receive queue's,
; which immediately empties the given queue.
;
; LPT ports will just return the device error word
;
; Entry:
; AH = Device ID
; BH = Queue # to clear (0=Tx, 1=Rx)
; Returns:
; AX = Device Error Word. (Not reset)
; Error Returns:
; AX = error code
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public $FLUSH
$FLUSH proc near
push si
push di
call GetDEB ;si --> DEB
jc Flush40 ;Invalid ID
js Flush30 ;LPT port, return any error
mov cx,QOutCount-QInCount ;# of bytes to zero
lea di,QInCount[si] ;--> receive queue data
or bh,bh ;Transmit queue?
jnz Flush10 ; No, input queue
add di,cx ; Yes, --> xmit queue data
Flush10:
cld
push ds
pop es
assumes es,nothing
xor al,al
call DOCLI ;Time to worry about critical sections
rep stosb
call DOSTI
.errnz QInGet-QInCount-2
.errnz QInPut-QInGet-2
.errnz QOutCount-QInPut-2
.errnz QOutGet-QOutCount-2
.errnz QOutPut-QOutGet-2
or bh,bh ;Rx queue?
jz Flush30 ; No, xmit queue
; If the queue to be cleared is the receive queue, any
; hardware handshake must be cleared to prevent a possible
; deadlock situation. Since we just zeroed the queue count,
; a quick call to $RecCom should do wonders to clear any
; receive handshake (i.e. send XON if needed).
Flush20:
call $RECCOM ;Take care of handshakes here
Flush30:
mov ax,ComErr[si] ;And return the error word.
Flush40:
pop di
pop si
ret
$FLUSH endp
page
;----------------------------Private-Routine----------------------------;
;
; TXI - Transmit A Character Immediately
;
; Set up a character to be transmitted "immediately".
; by placing the character in a location that guarantees
; it to be the next character transmitted.
;
; The check to see if the immediate character can be placed has
; already been made prior to entry.
;
; Interrupts must be disabled before entering this code
;
; Entry:
; AH = Character
; DS:SI --> DEB
; Returns:
; None
; Error Returns:
; None
; Registers Preserved:
; BX,CX,SI,DI,DS,ES
; Registers Destroyed:
; L,DX,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public TXI ;Public for debugging
TXI proc near
; call DOCLI ;Must be done by caller!
or EFlags[si],fTxImmed ;Show char to xmit
mov ImmedChar[si],ah ;Set character to transmit next
; jmp short KickTx ;Kick Xmit just in case
errn$ KickTx
TXI endp
page
;----------------------------Private-Routine----------------------------;
;
; KickTx - Kick Transmitter
;
; "Kick" the transmitter interrupt routine into operation.
; If the Transmitter Holding Register isn't empty, then
; nothing needs to be done. If it is empty, then the xmit
; interrupt needs to enabled in the IER.
;
; Entry:
; DS:SI --> DEB
; INTERRUPTS DISABLED!
; Returns:
; None
; Error Returns:
; None
; Registers Preserved:
; BX,CX,SI,DI,DS,ES
; Registers Destroyed:
; AX,DX,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public KickTx ;Public for debugging
KickTx proc near
; call DOCLI ;Done by caller
test [si.VCDflags], 1 ;Q: we still own port?
jnz can_we_steal ; N:
enable_int:
mov dx,Port[si] ;Get device I/O address
add dl,ACE_IER ;--> Interrupt enable register
in al,dx ;Get current IER state
test al,ACE_ETBEI ;Interrupt already enabled?
jnz KickTx10 ; Yes, don't reenable it
or al,ACE_ETBEI ; No, enable it
out dx,al
iodelay ;8250, 8250-B bug requires
out dx,al ; writting register twice
KickTx10:
; call DOSTI ;Done by caller
ret
can_we_steal:
call StealPort ; call VCD to see if we can steal
; the port back
jnc short enable_int ; jump, if we got it
;
; flush out queue
;
xor ax, ax
mov [si.QOutCount], ax
mov [si.QOutMod], ax
mov ax, [si.QOutGet]
mov [si.QOutPut], ax
jmp short KickTx10 ; N:
KickTx endp
page
;----------------------------Private-Routine----------------------------;
;
; MSRWait - Modem Status Register Wait
;
; This routine checks the modem status register for CTS, DSR,
; and/or RLSD signals. If a timeout occurs while checking,
; the appropriate error code will be returned.
;
; This routine will not check for any signal with a corresponding
; time out value of 0 (ignore line).
;
; Entry:
; SI --> DEB
; Returns:
; AL = error code
; ComErr[si] updated
; 'Z' set if no timeout
; Error Returns:
; None
; Registers Destroyed:
; AX,CX,DX,FLAGS
; History:
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public MSRWait ;Public for debugging
MSRWait proc near
push di
MSRRestart:
xor di,di ;Init Timer
MSRWait10:
mov cx,11 ;Init Delay counter (used on non-ATs)
MSRWait20:
xor dh,dh ;Init error accumulator
mov al,MSRShadow[si] ;Get Modem Status
and al,MSRMask[si] ;Only leave bits of interest
xor al,MSRMask[si] ;0 = line high
jz MSRWait90 ;All lines of interest are high
mov ah,al ;ah has 1 bits for down lines
shl ah,1 ;Line Signal Detect low?
jnc MSRWait30 ; No, it's high
.errnz ACE_RLSD-10000000b
cmp di,[si.DCB_RlsTimeout] ;RLSD timeout yet?
jb MSRWait30 ; No
or dh,CE_RLSDTO ;Show modem status timeout
MSRWait30:
shl ah,1 ;Data Set Ready low?
shl ah,1
.errnz ACE_DSR-00100000b
jnc MSRWait40 ; No, it's high
cmp di,[si.DCB_DsrTimeout] ;DSR timeout yet?
jb MSRWait40 ; No
or dh,CE_DSRTO ;Show data set ready timeout
MSRWait40:
shl ah,1 ;CTS low?
jnc MSRWait50 ; No, it's high
.errnz ACE_CTS-00010000b
cmp di,[si.DCB_CtsTimeout] ;CTS timeout yet?
jb MSRWait50 ; No
or dh,CE_CTSTO ;Show clear to send timeout
MSRWait50:
or dh,dh ;Any timeout occur?
jnz MSRWait80 ; Yes
cmp [$MachineID],0FCh ;Is this a PC-AT? [rkh debug for PS/2]
je MSRWait60 ; Yes, use ROM function
loop MSRWait20 ; No, continue until timeout
jmp short MSRWait70 ;Should have taken about a millisecond
MSRWait60:
push bx ;Special SALMON ROM routine to delay
push di
xor cx,cx ;Number of Microseconds to delay
mov dx,1000 ; in CX:DX
mov ah,86h
int 15h ;Wait 1 millisecond
pop di
pop bx
MSRWait70:
inc di ;Timer +1
jmp short MSRWait10 ;Until Timeout or Good status
MSRWait80:
xor ah,ah
mov al,dh
or by ComErr[si],al ;Return updated status
.errnz HIGH CE_CTSTO
.errnz HIGH CE_DSRTO
.errnz HIGH CE_RLSDTO
MSRWait90:
or al,al ;Set 'Z' if no timeout
pop di
ret
MSRWait endp
page
;----------------------------Public Routine-----------------------------;
;
; $EVT - Set Event Mask
;
; Set up event word and mask. Returns a pointer to a word in which
; certain bits, as enabled by the mask, will be set when certain
; events occur.
;
; Entry:
; AH = Device ID
; BX = Event enable mask
; Returns:
; DX:AX --> event word.
; Error Returns:
; AX = 0 if error
; Registers Preserved:
; BX,CX,SI,DI,DS,ES
; Registers Destroyed:
; AX,DX,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public $EVT
$EVT proc near
push si
xor dx,dx ;In case of error
call GetDEB ;Get pointer to DEB
mov ax,dx ;Finish setting error return value
jc Evt10 ;Illegal id, return error
js Evt10 ;LPTx, return error
mov EvtMask[si],bx ;Save the new event mask
lea ax,EvtWord[si] ;Get address of event word
mov dx,ds ; into dx:ax
Evt10:
pop si
ret
$EVT endp
page
;----------------------------Public Routine-----------------------------;
;
; $EVTGET - Get Event Word
;
; Return and clear fields in the event word. This routine MUST be used
; by applications to read the event word, as it is the ONLY way they
; can be assured that an event is not lost between reading the flags
; and resetting some.
;
; Entry:
; AH = Device ID
; BX = Event clear mask
; Returns:
; AX = event word
; Error Returns:
; None
; Registers Preserved:
; AX,CX,SI,DI,DS,ES
; Registers Destroyed:
; BX,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public $EVTGET
$EVTGET proc near
push si
call GetDEB
mov ah,0 ;In case of error (AL already 0)
jc EvtGet10 ;Illegal ID
js EvtGet10 ;Illegal ID
call DOCLI ;No interrupts allowed
mov ax,EvtWord[si] ;Get the current event word
not bx ;Convert mask for our purposes
and bx,ax ;Clear events that user wants us to
mov EvtWord[si],bx ;And save those results
call DOSTI ;Magic over
EvtGet10:
pop si
ret
$EVTGET endp
page
;----------------------------Public Routine-----------------------------;
;
; $STACOM - Return Status Information
;
; Returns the number of bytes in both queues.
;
; LPT ports will show both queues empty.
; and resetting some.
;
; Entry:
; AH = Device ID
; ES:BX = Pointer to status structure to be updated.
; = Null if not to update
; Returns:
; AX = comm error word
; Status Structure Updated.
; Error Returns:
; AX = error code
; Registers Preserved:
; SI,DI,DS,ES
; Registers Destroyed:
; AX,BX,CX,DX,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public $STACOM
$STACOM proc near
push si
call GetDEB ;Get DEB pointer in SI
jc StaCom30 ;Invalid ID
mov cx,es ;Is the pointer NULL?
or cx,bx
jz StaCom25 ; Yes, just return error code
xor cx,cx
xor dx,dx
or ah,ah ;Set 'S' if LPT port
mov ax,cx ;For LPTs, everything is zero
js StaCom20 ;LPT port
; Need to get the status for a com port. Since not all the
; status is contained within EFlags, it has to be assembled.
; Also note that currently there is no way to specify RLSD
; as a handshaking line, so fRLSDHold is always returned false.
mov al,MSRShadow[si] ;Get state of hardware lines
and al,OutHHSLines[si] ;Mask off required bits
xor al,OutHHSLines[si] ;1 = line low
mov cl,4 ;Align bits
shr al,cl ;al = fCTSHold + fDSRHold
.errnz ACE_CTS-00010000b
.errnz ACE_DSR-00100000b
.errnz fCTSHold-00000001b
.errnz fDSRHold-00000010b
mov ah,HSFlag[si] ;Get fXOffHold+fXOffSent
and ah,XOffReceived+XOffSent
or al,ah
.errnz XOffReceived-fXOFFHold
.errnz XOffSent-fXOFFSent
mov ah,EFlags[si] ;Get fEOF+fTxImmed
and ah,fEOF+fTxImmed
or al,ah
mov cx,QInCount[si] ;Get input queue count
mov dx,QOutCount[si] ;Get tx queue count
StaCom20:
mov es:[bx.COMS_BitMask1],al
mov es:[bx.COMS_cbInQue],cx
mov es:[bx.COMS_cbOutQue],dx
StaCom25:
xor ax,ax ;Return old com error
xchg ax,ComErr[si] ; and clear it out
StaCom30:
pop si
ret
$STACOM endp
page
;----------------------------Public Routine-----------------------------;
;
; $SetBrk - Set Break
;
; Clamp the Tx data line low. Does not wait for the
; transmitter holding register and shift registers to empty.
;
; LPT ports will just return the comm error word
;
; Entry:
; AH = Device ID
; Returns:
; AX = comm error word
; Error Returns:
; AX = error code
; Registers Preserved:
; SI,DI,DS,ES
; Registers Destroyed:
; AX,BX,CX,DX,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public $SETBRK
$SETBRK proc near
mov cx,0FF00h+ACE_SB ;Will be setting break
jmp short ClrBrk10
.errnz BreakSet-ACE_SB ;Must be same bits
$SETBRK endp
page
;----------------------------Public Routine-----------------------------;
;
; $CLRBRK - Clear Break
;
; Release any BREAK clamp on the Tx data line.
;
; LPT ports will just return the comm error word
;
; Entry:
; AH = Device ID
; Returns:
; AX = comm error word
; Error Returns:
; AX = error code
; Registers Preserved:
; SI,DI,DS,ES
; Registers Destroyed:
; AX,BX,CX,DX,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public $CLRBRK
$CLRBRK proc near
mov cx,(NOT ACE_SB) SHL 8
.errnz BreakSet-ACE_SB ;Must be same bits
ClrBrk10:
push si
call GetDEB ;Get DEB address
jc ClrBrk30 ;Invalid ID
js ClrBrk20 ;Ignored for LPT ports
call DOCLI
and HSFlag[si],ch ;Set or clear the BreakSet bit
or HSFlag[si],cl
; ch = mask to remove bits in the Line Control Register
; cl = mask to turn bits on in the Line Control Register
mov dx,Port[si] ;Get comm device base I/O port
add dl,ACE_LCR ;Point at the Line Control Regieter
in al,dx ;Get old line control value
and al,ch ;Turn off desired bits
or al,cl ;Turn on desired bits
iodelay
out dx,al ;Output New LCR.
call DOSTI
ClrBrk20:
mov ax,ComErr[si] ;Return Status Word
ClrBrk30:
pop si
ret
$CLRBRK endp
page
;----------------------------Public Routine-----------------------------;
;
; $EXTCOM - Extended Comm Functions
;
; A number of extended functions are routed through this entry point.
;
; Functions currently implemented:
;
; 0: Ignored
; 1: SETXOFF - Exactly as if X-OFF character has been received.
; 2: SETXON - Exactly as if X-ON character has been received.
; 3: SETRTS - Set the RTS signal
; 4: CLRRTS - Clear the RTS signal
; 5: SETDTR - Set the DTR signal
; 6: CLRDTR - Clear the DTR signal
; 7: RESET - Yank on reset line if available (LPT devices)
;
; Entry:
; AH = Device ID
; BL = Function Code
; (0-127 are MS-defined, 128-255 are OEM defined)
; Returns:
; AX = comm error word
; Error Returns:
; AX = error code
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
; Dispatch table for the extended functions
ExtTab dw ExtComDummy ;Function 0: Never Mind
dw ExtCom_FN1 ;1: Set X-Off
dw ExtCom_FN2 ;2: Clear X-Off
dw ExtCom_FN3 ;3: Set RTS
dw ExtCom_FN4 ;4: Clear RTS
dw ExtCom_FN5 ;5: Set DSR
dw ExtCom_FN6 ;6: Clear DSR
dw ExtCom_FN7 ;7: Reset printer
dw ExtCom_FN8 ;8: Get Max LPT Port
dw ExtCom_FN9 ;9: Get Max COM Port
dw ExtCom_FN10 ;10: Get COM Port Base & IRQ
dw ExtCom_FN10 ;11: Get COM Port Base & IRQ
%OUT fix this for bld 32 -- GetBaseIRQ is now 10
assumes ds,Data
assumes es,nothing
public $EXTCOM
$EXTCOM proc near
push si
push di
call GetDEB ;Get DEB pointer
jc ExtCom40 ;Invalid ID, return error
mov dx,Port[si] ; get port address
jns ExtCom10 ;Its a COM port
cmp bl,7 ;RESET extended function?
jne ExtCom30 ; No, return error word
jmp short ExtCom20 ; Yes, invoke the function
ExtCom10:
cmp bl,11 ;Last fcn supported
ja ExtCom30 ;Not an implemented function.
ExtCom20:
xor bh,bh
add bx,bx ;Shift for the call
call DOCLI ;Consider as critical sections
call ExtTab[bx] ; and perform the function
call DOSTI
jc ExtCom40 ; jump if sub returns data in DX:AX
ExtCom30:
mov ax,ComErr[si] ;Return standard error word
xor dx, dx
ExtCom40:
pop di
pop si
ret
$EXTCOM endp
page
;----------------------------Private-Routine----------------------------;
;
; ExtCom_FN1 - Extended Function Set X-Off
;
; Analagous to receiving an X-OFF character. Bufferred transmision of
; characters is halted until an X-ON character is received, or until
; we fake that with a Clear X-Off call.
;
; Entry:
; interrupts disabled
; dx = port base address
; Returns:
; None
; Error Returns:
; None
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public ExtCom_FN1
ExtCom_FN1 proc near
or HSFlag[si],XOffReceived
ExtComDummy:
clc
ret
ExtCom_FN1 endp
page
;----------------------------Private-Routine----------------------------;
;
; ExtCom_FN2 - Extended Function Clear X-Off
;
; Analagous to receiving an X-ON character. Buffered
; transmission of characters is restarted.
;
; Entry:
; interrupts disabled
; dx = port base address
; Returns:
; None
; Error Returns:
; None
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public ExtCom_FN2
ExtCom_FN2 proc near
and HSFlag[si],NOT XOffReceived
call KickTx ;Kick transmitter interrupts on
clc
ret
ExtCom_FN2 endp
page
;----------------------------Private-Routine----------------------------;
;
; ExtCom_FN3 - Extended Function Set RTS
;
; Set the RTS signal active.
;
; Entry:
; interrupts disabled
; dx = port base address
; Returns:
; None
; Error Returns:
; None
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public ExtCom_FN3
ExtCom_FN3 proc near
add dl,ACE_MCR ;Point at Modem Control Register
in al,dx ;Get current settings
or al,ACE_RTS ;Set RTS
iodelay
out dx,al ;And update
clc
ret
ExtCom_FN3 endp
page
;----------------------------Private-Routine----------------------------;
;
; ExtCom_FN4 - Extended Function Clear RTS
;
; Set the RTS signal inactive.
;
; Entry:
; interrupts disabled
; dx = port base address
; Returns:
; None
; Error Returns:
; None
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public ExtCom_FN4
ExtCom_FN4 proc near
add dl,ACE_MCR ;Point at Modem Control Register
in al,dx ;Get current settings
and al,NOT ACE_RTS ;Clear RTS
iodelay
out dx,al ;And update
clc
ret
ExtCom_FN4 endp
page
;----------------------------Private-Routine----------------------------;
;
; ExtCom_FN5 - Extended Function Set DTR
;
; Set the DTR signal active.
;
; Entry:
; interrupts disabled
; dx = port base address
; Returns:
; None
; Error Returns:
; None
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public ExtCom_FN5
ExtCom_FN5 proc near
add dl,ACE_MCR ;Point at Modem Control Register
in al,dx ;Get current settings
or al,ACE_DTR ;Set DTR
iodelay
out dx,al ;And update
clc
ret
ExtCom_FN5 endp
page
;----------------------------Private-Routine----------------------------;
;
; ExtCom_FN6 - Extended Function Clear DTR
;
; Set the DTR signal inactive.
;
; Entry:
; interrupts disabled
; dx = port base address
; Returns:
; None
; Error Returns:
; None
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public ExtCom_FN6
ExtCom_FN6 proc near
add dl,ACE_MCR ;Point at Modem Control Register
in al,dx ;Get current settings
and al,NOT ACE_DTR ;Clear DTR
iodelay
out dx,al ;And update
clc
ret
ExtCom_FN6 endp
page
;----------------------------Private-Routine----------------------------;
;
; ExtCom_FN7 - Extended Function Reset Printer
;
; Assert the RESET line on an LPT port
;
; Entry:
; interrupts disabled
; dx = port base address
; Returns:
; None
; Error Returns:
; None
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public ExtCom_FN7
ExtCom_FN7 proc near
call DOSTI ;Not called at interrupt time
mov ch,1 ;ROM BIOS Reset Port
call DoLPT ;Perform the function
clc
ret
ExtCom_FN7 endp
page
;----------------------------Private-Routine----------------------------;
;
; ExtCom_FN8 - Get Num Ports
;
; Entry:
; Returns:
; AX = Max LPT port id
; DX = 0
; Error Returns:
; None
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public ExtCom_FN8
ExtCom_FN8 proc near
mov ax, MAXLPT + LPTx
xor dx, dx
stc
ret
ExtCom_FN8 endp
page
;----------------------------Private-Routine----------------------------;
;
; ExtCom_FN9 - Get Max COM Port
;
; Entry:
; Returns:
; AX = Max COM port id
; DX = 0
; Error Returns:
; None
; Registers Preserved:
; SI,DI,DS
; Registers Destroyed:
; AX,BX,CX,DX,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public ExtCom_FN9
ExtCom_FN9 proc near
mov ax, MAXCOM
xor dx, dx
stc
ret
ExtCom_FN9 endp
page
;----------------------------Private-Routine----------------------------;
;
; ExtCom_FN10 - Get COM Port Bas & IRQ
;
; Entry:
; AH = com id
; DS:SI -> DEB
; Returns:
; AX = base
; DX = irq
; Error Returns:
; None
; Registers Preserved:
; DS
; Registers Destroyed:
; AX,BX,CX,DX,DI,ES,FLAGS
; History:
;-----------------------------------------------------------------------;
;------------------------------Pseudo-Code------------------------------;
; {
; }
;-----------------------------------------------------------------------;
assumes ds,Data
assumes es,nothing
public ExtCom_FN10
ExtCom_FN10 proc near
call FindCOMPort
stc
ret
ExtCom_FN10 endp
page
ifdef DEBUG
public RecCom40, RecCom50, RecCom60, RecCom70, RecCom80
public RecCom90, RecCom95, RecCom100
public SendImm10, SendImm20,
public SendCom10, SendCom20, SendCom30, SendCom40, SendCom50, SendCom60
public Flush10, Flush20, Flush30, Flush40
public KickTx10
public Evt10
public EvtGet10
public StaCom20, StaCom25, StaCom30
public ClrBrk10, ClrBrk20, ClrBrk30
public ExtCom10, ExtCom20, ExtCom30, ExtCom40, ExtComDummy
public MSRRestart, MSRWait10, MSRWait20, MSRWait30, MSRWait40
public MSRWait50, MSRWait60, MSRWait70, MSRWait80, MSRWait90
endif
DOSTI proc near
FSTI
ret
DOSTI endp
DOCLI proc near
FCLI
ret
DOCLI endp
sEnd code
End
Reference in a new issue Copy permalink