windows-nt/Source/XPSP1/NT/net/snmp/mibs/msipbtp.mib

MSIPBOOTP-MIB DEFINITIONS ::= BEGIN

--
-- Microsoft(R) BOOTP for Internet Protocol MIB
--
-- This MIB defines the management information for the BOOTP  
-- Protocol.  The information in this MIB is divided
-- into 3 groups:
--		
-- 1. Global Group
--		Contains the global information BOOTP protocol
--		Information contained in this group is independent of the interfaces
--		over which the protocol is enabled.
--
-- 2. Interface Group
--		Contains RIP configuration information and statistics specific 
--		to each interface.
--
--

IMPORTS
        enterprises, OBJECT-TYPE, 
        TimeTicks, Counter, IpAddress 
            FROM RFC1155-SMI
        microsoft, software
            FROM MSFT-MIB;

-- MSIPRIP2

-- microsoft   OBJECT IDENTIFIER ::= { enterprises 311 }
-- software    OBJECT IDENTIFIER ::= { microsoft 1 }

msipbootp   OBJECT IDENTIFIER ::= { software 12 }

--
-- groups in MSIPRIP2
--

global      OBJECT IDENTIFIER ::= { msipbootp 1 }
interface   OBJECT IDENTIFIER ::= { msipbootp 2 }


--
-- BOOTP Global Group
--
--		Contains the global information for the BOOTP protocol
--		Information contained in this group is independent of the 
--		interfaces over which the protocol is enabled.
--
--		Global information consists of scalar variables which can be 
--		updated and table of DHCP/BOOTP servers to which packets will be
--		sent.
--

globalLoggingLevel OBJECT-TYPE
    SYNTAX INTEGER {
                none(1),
                error(2),
                warning(3),
                information(4)
           }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Information logged can be None, Error only, Error + Warning, 
         Error + Warn + Logging.  This variable controls the amount
         of information logged"
         
    ::= { global 1 }


globalMaxRecQueueSize OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Maximum size to use for queueing incoming packets."
        
    ::= { global 2 }


globalServerCount OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Number of entries BOOTP server table"
        
    ::= { global 3 }


--
-- the DHCP/BOOTP Server Table
--
--
-- Entries in the BOOTP Server table are IP addresses of BOOTP servers 
-- to which request packets are forwarded.  
--

globalBOOTPServerTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF GlobalBOOTPServerEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "Table of BOOTP servers to which packets are sent by this router"
        
    ::= { global 4 }


globalBOOTPServerEntry OBJECT-TYPE
    SYNTAX  GlobalBOOTPServerEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "BOOTP server entry. Contains the IP address of a BOOTP server"

    INDEX   { globalBOOTPServerAddr }
    
    ::= { globalBOOTPServerTable 1 }


GlobalBOOTPServerEntry ::=
    SEQUENCE {
        globalBOOTPServerAddr
            IpAddress,
        globalBOOTPServerTag
        	INTEGER
    }


globalBOOTPServerAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "IP Address of DHCP/BOOTP router"
        
    ::= { globalBOOTPServerEntry 1 }

globalBOOTPServerTag OBJECT-TYPE
	SYNTAX	INTEGER {	
        		create(1),
        		delete(2)
        	}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION	
		"create : Creates an entry in the BOOTP Server table
		 delete	: Deletes an entry in the BOOTP Server table
		"
		
	::= { globalBOOTPServerEntry 2 }


--
-- BOOTP Interface group
--
-- 		Contains BOOTP interface configuration information, BOOTP interface 
--		statistics and BOOTP interface binding information.  Each type of
--		information is stored in a table with one entry for each 
--		interface over which BOOTP is enabled. 
--
--		Asscociated with each entry in the Interface binding table is a
--		list of entries in the 
--
--			Interface Address Table		: List of address bound to an interface
--

--
-- Interface Statistics Table.
--

--
-- 	BOOTP statistics for each interface.  Statistics include 
--		number of send/receive failures
--		number of ARP Update Failures 
--		number of requests/replies received/discarded, 
--

ifStatsTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IfStatsEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "Table of BOOTP statistics for interfaces"
        
    ::= { interface 1 }


ifStatsEntry OBJECT-TYPE
    SYNTAX  IfStatsEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "BOOTP interface statistics entry. 
         Each entry contains counts of send/receive failures, requests/relies
         received/discarded, and ARP Update failures"
        
    INDEX   { ifSEIndex }
    
    ::= { ifStatsTable 1 }


IfStatsEntry ::=
    SEQUENCE {
        ifSEIndex
            INTEGER,
        ifSEState
            INTEGER,
        ifSESendFailures
            Counter,
        ifSEReceiveFailures
            Counter,
        ifSEArpUpdateFailures
            Counter,
        ifSERequestReceiveds
            Counter,
        ifSERequestDiscards
            Counter,
        ifSEReplyReceiveds
            Counter,
        ifSEReplyDiscards
            Counter
    }


ifSEIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Index for the BOOTP interface Statistics table"
        
    ::= { ifStatsEntry 1 } 

    
ifSEState OBJECT-TYPE
    SYNTAX  INTEGER {
                enabled(1),
                bound(2)
            }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Current state of BOOTP on this interface."
        
    ::= { ifStatsEntry 2 }


ifSESendFailures OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Number of times a failure occurred while attempting to send a 
         packet on this interface."

    ::= { ifStatsEntry 3 }


ifSEReceiveFailures OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Number of times a failure occurred while attempting to receive
         a packet on this interface."

    ::= { ifStatsEntry 4 }


ifSEArpUpdateFailures OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Number of times a failure occurred while attempting to 
         update the ARP cache on this interface."

    ::= { ifStatsEntry 5 }


ifSERequestReceiveds OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Number of BOOTP REQUEST packets received on this interface."
        
    ::= { ifStatsEntry 6 }


ifSERequestDiscards OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Number of BOOTP REQUEST packets discarded on this interface."
        
    ::= { ifStatsEntry 7 }


ifSEReplyReceiveds OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Number of BOOTP REPLY packets received on this interface."
        
    ::= { ifStatsEntry 8 }


ifSEReplyDiscards OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Number of BOOTP REPLY packets discarded due to errors in the header."
        
    ::= { ifStatsEntry 9 }




--
-- BOOTP Interface Configuration Table.
--

--
-- 	BOOTP Interface config includes the interface setting for :
--
--		Relay Modes, max hop count and minimum seconds since boot
--
--

ifConfigTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IfConfigEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "BOOTP Interface configuration table.  List of subnets that require
         separate configuration in BOOTP."
        
    ::= { interface 2 }


ifConfigEntry OBJECT-TYPE
    SYNTAX  IfConfigEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "BOOTP configuration entry for an interface. A single routing domain in a
         single subnet."
        
    INDEX   { ifCEIndex }
    
    ::= { ifConfigTable 1 }


IfConfigEntry ::=
    SEQUENCE {
        ifCEIndex
            INTEGER,
        ifCEState
            INTEGER,
        ifCERelayMode
        	INTEGER,
       	ifCEMaxHopCount
       		INTEGER,
       	ifCEMinSecondsSinceBoot
       		INTEGER
    }


ifCEIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Index for BOOTP interface config. table."
        
    ::= { ifConfigEntry 1 }


ifCEState OBJECT-TYPE
    SYNTAX  INTEGER {
                enabled(1),
                bound(2)
            }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Current state of BOOTP on this interface."
        
    ::= { ifConfigEntry 2 }


ifCERelayMode OBJECT-TYPE
	SYNTAX	INTEGER {
				disabled(1),
				enabled(2)
			}
				
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Relay Mode for BOOTP request/reply packets "

	DEFVAL { enabled }
	
	::= { ifConfigEntry 3 }


ifCEMaxHopCount OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Each time a BOOTP request is forwarded by the BOOTP relay agent 
		 the request packet's hop count is incremented.  If the number of 
		 hops traversed by the packet exceeds the max hop count configured
		 on a relay agent the request packet is discarded by that relay agent."

	DEFVAL { 4 }

	::= { ifConfigEntry 4 }


ifCEMinSecondsSinceBoot OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Each BOOTP request sent by a client contains the time since the client 
		 has booted.  If the time since boot for the client exceeds the 
		 configured value of ifCEMinSecondsSinceBoot on a relay agent,  
		 the relay agent will forward the request.  Otherwise it will discard 
		 the request."

	DEFVAL { 4 }

	::= { ifConfigEntry 5 }
	

--
-- Interface Binding Table.
--

--
-- This table stores information pertaining to the binding state and the 
-- number of IP addresses bound to an interface.
--
-- The list of IP address bound to an interface is maintained in the 
-- Interface Address Table
--


ifBindingTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IfBindingEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "Table containing binding information for each interface."
        
    ::= { interface 3 }


ifBindingEntry OBJECT-TYPE
    SYNTAX  IfBindingEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
    	"Binding information entry for an interface"
    	
    INDEX   { ifBindingIndex }
    
    ::= { ifBindingTable 1 }


IfBindingEntry ::=
    SEQUENCE {
        ifBindingIndex
            INTEGER,
        ifBindingState
            INTEGER,
        ifBindingAddrCount
            INTEGER
    }


ifBindingIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"Index for an interface entry in the binding table"
    	
    ::= { ifBindingEntry 1 }


ifBindingState OBJECT-TYPE
    SYNTAX  INTEGER {
                enabled(1),
                bound(2)
            }        
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "State of the interface binding"
        
    ::= { ifBindingEntry 2 }


ifBindingAddrCount OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Number of IP address bound to this interface.  This is also the 
         number of entries in the Interface Address Table corresponding
         to this interface."
        
    ::= { ifBindingEntry 3 }


--
-- Interface Address Table
--

--
-- The Interface Address Table contains the list of address bound to
-- each interface.
--
-- This table is indexed by an interface number and an IP address.
--

ifAddressTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IfAddressEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
    	"Table of IP addresses bound to interfaces"
    	
    ::= { interface 4 }


ifAddressEntry OBJECT-TYPE
    SYNTAX  IfAddressEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
    	"Entry for an IP address for an interface"
    	
    INDEX   { ifAEIfIndex, ifAEAddress, ifAEMask }
    
    ::= { ifAddressTable 1 }


IfAddressEntry ::=
    SEQUENCE {
    	ifAEIfIndex
    		INTEGER,
        ifAEAddress
            IpAddress,
        ifAEMask
            IpAddress
    }


ifAEIfIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Index corresponding to the Interface with which this entry 
		 is associated."

	::= { ifAddressEntry 1 }

	
ifAEAddress OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Ip address bound to the associated interface."
        
    ::= { ifAddressEntry 2 }


ifAEMask OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Address Mask associated with the IP address contained in the 
         corresponding ifAEAddress field."
         
    ::= { ifAddressEntry 3 }


END