windows-nt/Source/XPSP1/NT/net/tcpip/tpipv6/ipv6mon/ipv6mon.rc

1108 lines
53 KiB
Plaintext
Raw Normal View History

2020-09-26 03:20:57 -05:00
/*++
Copyright (c) 1996 Microsoft Corporation
Module Name:
ipv6mon.rc
Abstract:
IPv6 Router Console Monitor Resources
Author:
Stefan Solomon 01/04/1996
Revision History:
Brad Mahugh 09/06/1999 (revised for netsh guidelines)
--*/
#include "strdefs.h"
STRINGTABLE
{
MSG_NULL, ""
MSG_NEWLINE, "\n"
MSG_SEPARATOR, "\
-------------------------------------------------------------------------\n"
HLP_IP6TO4_SET_INTERFACE,
"Sets 6to4 interface configuration information.\n"
HLP_IP6TO4_SET_INTERFACE_EX "\
\nUsage: %1!s! [name=]<string> \
\n [[routing=](enabled|disabled|default)] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n name - Interface name. \
\n routing - Whether to act as a router. \
\n \
\nRemarks: Sets 6to4 interface configuration information. \
\n \
\nExamples: \
\n \
\n %1!s! ""Private"" enabled \
\n \n\n"
HLP_IP6TO4_SHOW_INTERFACE,
"Shows the 6to4 interface configuration information.\n"
HLP_IP6TO4_SHOW_INTERFACE_EX, "\
\nUsage %1!s! \
\n \
\n Shows the 6to4 interface configuration information. \
\n\n"
HLP_IP6TO4_SET_RELAY,
"Sets 6to4 relay information.\n"
HLP_IP6TO4_SET_RELAY_EX "\
\nUsage: %1!s! [[name=](<string>|default)] \
\n [[state=](enabled|disabled|automatic|default)] \
\n [[interval]=<integer>] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n name - Name of the 6to4 relay. \
\n state - State of relay name resolution. \
\n interval - Resolution interval (in minutes). \
\n \
\nRemarks: Sets 6to4 relay information. \
\n \
\nExamples: \
\n \
\n %1!s! 6to4.ipv6.org. enabled 1440 \
\n \n\n"
HLP_IP6TO4_SHOW_RELAY,
"Shows the 6to4 relay information.\n"
HLP_IP6TO4_SHOW_RELAY_EX, "\
\nUsage %1!s! \
\n \
\n Shows the 6to4 relay information. \
\n\n"
HLP_IP6TO4_SET_ROUTING,
"Sets 6to4 routing information.\n"
HLP_IP6TO4_SET_ROUTING_EX "\
\nUsage: %1!s! [[routing=](enabled|disabled|automatic|default)] \
\n [[sitelocals=](enabled|disabled|default)] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n routing - State of 6to4 routing. \
\n sitelocals - Whether to use Site-Local addresses. \
\n \
\nRemarks: Sets 6to4 routing information. \
\n \
\nExamples: \
\n \
\n %1!s! default default \
\n %1!s! routing=enabled sitelocals=enabled \
\n \n\n"
HLP_IP6TO4_SHOW_ROUTING,
"Shows the 6to4 routing state.\n"
HLP_IP6TO4_SHOW_ROUTING_EX, "\
\nUsage %1!s! \
\n \
\n Shows the 6to4 routing state. \
\n\n"
HLP_IP6TO4_SET_STATE,
"Sets the 6to4 state.\n"
HLP_IP6TO4_SET_STATE_EX "\
\nUsage: %1!s! [[state=](enabled|disabled|default)] \
\n [[undoonstop=](enabled|disabled|default)] \
\n [[6over4=](enabled|disabled|default)] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n state - Whether 6to4 is enabled. \
\n undoonstop - Whether 6to4 is disabled on service stop. \
\n 6over4 - Whether 6over4 interfaces are created.\
\n \
\nRemarks: Sets the 6to4 configuration state. \
\n \
\nExamples: \
\n \
\n %1!s! default default default \
\n %1!s! state=enabled undoonstop=disabled 6over4=disabled\
\n\n"
HLP_IP6TO4_SHOW_STATE,
"Shows the 6to4 state.\n"
HLP_IP6TO4_SHOW_STATE_EX, "\
\nUsage %1!s! \
\n \
\n Shows the 6to4 state. \
\n\n"
HLP_IP6TO4_RESET,
"Resets all 6to4 configuration state.\n"
HLP_IP6TO4_RESET_EX, "\
\nUsage %1!s! \
\n \
\nRemarks: Resets all 6to4 configuration state. \
\n\n"
HLP_IPV6_INSTALL, "Installs IPv6.\n"
HLP_IPV6_INSTALL_EX,"\
\nUsage %1!s! \
\n \
\nRemarks: Installs IPv6.\
\n\n"
HLP_IPV6_RENEW, "Restarts IPv6 interfaces.\n"
HLP_IPV6_RENEW_EX, "\
\nUsage %1!s! [[interface=]<string>] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index.\
\n \
\nRemarks: Restarts IPv6 interfaces. \
\n \
\nExample: \
\n \
\n %1!s! ""Private"" \
\n\n"
HLP_IPV6_RESET,
"Resets IPv6 configuration state.\n"
HLP_IPV6_RESET_EX, "\
\nUsage %1!s! \
\n \
\nRemarks: Resets IPv6 configuration state. \
\n\n"
HLP_IPV6_UNINSTALL, "Uninstalls IPv6.\n"
HLP_IPV6_UNINSTALL_EX,"\
\nUsage %1!s! \
\n \
\nRemarks: Uninstalls IPv6.\
\n\n"
HLP_IPV6_ADD_6OVER4TUNNEL,
"Creates a 6over4 interface.\n"
HLP_IPV6_ADD_6OVER4TUNNEL_EX, "\
\nUsage %1!s! [interface=]<string> [localaddress=]<IPv4 address> \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Friendly name to use for interface. \
\n local address - IPv4 address for encapsulation. \
\n \
\nRemarks: Creates a 6over4 interface using the specified \
\n IPv4 address. \
\n \
\nExample: \
\n \
\n %1!s! ""Private"" 10.1.1.1 \
\n\n"
HLP_IPV6_ADD_ADDRESS,
"Adds an IPv6 address on an interface.\n"
HLP_IPV6_ADD_ADDRESS_EX, "\
\nUsage %1!s! [interface=]<string> [address=]<IPv6 address>\
\n [[type=]unicast|anycast] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index. \
\n address - IPv6 address to add. \
\n type - One of the following values: \
\n unicast: Adds a unicast address. This is the default.\
\n anycast: Adds an anycast address.\
\n \
\nRemarks: Adds an IPv6 address to a given interface. \
\n \
\nExample: \
\n \
\n %1!s! ""Private"" fe80::2 \
\n\n"
HLP_IPV6_ADD_PREFIXPOLICY,
"Adds a prefix policy entry.\n"
HLP_IPV6_ADD_PREFIXPOLICY_EX, "\
\nUsage %1!s! [prefix=]<IPv6 address>/<integer> \
\n [precedence=]<integer> [label=]<integer> \
\n \
\nParameters: \
\n \
\n Tag Value \
\n prefix - Prefix for which to add a policy. \
\n precedence - Precedence value for ordering. \
\n label - Label value for matching. \
\n \
\nRemarks: Adds a source and destination address selection policy for \
\n a given prefix. \
\n \
\nExample: \
\n \
\n %1!s! ::/96 3 4 \
\n\n"
HLP_IPV6_ADD_ROUTE,
"Adds an IPv6 route over an interface.\n"
HLP_IPV6_ADD_ROUTE_EX, "\
\nUsage %1!s! [prefix=]<IPv6 address>/<integer> [interface=]<string> \
\n [[nexthop=]<IPv6 address>] [[siteprefixlength=]<integer>] \
\n [[metric=]<integer>] [[publish=]no|yes|immortal] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n prefix - Prefix for which to add a route. \
\n interface - Interface name or index. \
\n nexthop - Gateway address, if prefix is not on-link. \
\n siteprefixlength - Prefix length for the entire site, if on-link. \
\n metric - Route metric. \
\n publish - One of the following values: \
\n no: Not advertised in Route Advertisements. \
\n This is the default. \
\n yes: Advertised in Route Advertisements. \
\n immortal: Advertised in Route Advertisements \
\n with an infinite lifetime. \
\n \
\nRemarks: Adds a route for a given prefix. \
\n \
\nExample: \
\n \
\n %1!s! 3ffe::/16 ""Internet"" fe80::1 \
\n\n"
HLP_IPV6_ADD_V6V4TUNNEL,
"Creates an IPv6-in-IPv4 point-to-point tunnel.\n"
HLP_IPV6_ADD_V6V4TUNNEL_EX, "\
\nUsage %1!s! [interface=]<string> [localaddress=]<IPv4 address> \
\n [remoteaddress=]<IPv4 address> \
\n [[neighbordiscovery=]enabled|disabled] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Friendly name to use for interface. \
\n localaddress - IPv4 address of local tunnel endpoint. \
\n remoteaddress - IPv4 address of remote tunnel endpoint. \
\n neighbordiscovery - One of the following values: \
\n enabled: ND is enabled on the interface. \
\n disabled: ND is disabled on the interface. \
\n This is the default. \
\n \
\nRemarks: Creates an IPv6-in-IPv4 tunnel. \
\n \
\nExample: \
\n \
\n %1!s! ""Private"" 10.0.0.1 192.168.1.1 \
\n\n"
HLP_IPV6_SET_ADDRESS,
"Modifies IPv6 address information.\n"
HLP_IPV6_SET_ADDRESS_EX, "\
\nUsage %1!s! [interface=]<string> [address=]<IPv6 address> \
\n [[type=]unicast|anycast] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index. \
\n address - IPv6 address to modify. \
\n type - One of the following values: \
\n unicast: Marks the address as a unicast address. \
\n This is the default. \
\n anycast: Marks the address as an anycast address.\
\n \
\nRemarks: Modifies an IPv6 address on a given interface. \
\n \
\nExample: \
\n \
\n %1!s! ""Private"" fe80::2 anycast \
\n\n"
HLP_IPV6_SET_GLOBAL,
"Modifies global configuration general parameters.\n"
HLP_IPV6_SET_GLOBAL_EX, "\
\nUsage %1!s! [[defaultcurhoplimit=]<integer>] [neighborcachelimit=]<integer>\
\n [[routecachelimit=]<integer>] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n defaultcurhoplimit - Default HopLimit of packets sent. \
\n neighborcachelimit - Maximum number of neighbor cache entries. \
\n routecachelimit - Maximum number of route cache entries. \
\n \
\nRemarks: Modifies global configuration general parameters. \
\n \
\nExample: \
\n \
\n %1!s! ""Private"" 32 100 100000 \
\n\n"
HLP_IPV6_SET_INTERFACE,
"Modifies interface configuration parameters.\n"
HLP_IPV6_SET_INTERFACE_EX, "\
\nUsage %1!s! [interface=]<string> [[forwarding=]enabled|disabled] \
\n [[advertise=]enabled|disabled] [[mtu=]<integer>] \
\n [[siteid=]<integer>] [[metric=]<integer>] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index. \
\n forwarding - Whether packets arriving on this interface can \
\n be forwarded to other interfaces. The default \
\n is disabled. \
\n advertise - Whether Router Advertisments are to be sent on \
\n this interface. The default is disabled. \
\n mtu - The MTU of this interface. The default is the \
\n natural MTU of the link. \
\n siteid - Site scope zone identifier. \
\n metric - Interface metric, added to route metrics for \
\n all route over the interface. \
\n \
\nRemarks: Modifies interface configuration parameters. \
\n \
\nExample: \
\n \
\n %1!s! ""Private"" siteid=2 metric=2 \
\n\n"
HLP_IPV6_SET_MOBILITY,
"Modifies mobility configuration parameters.\n"
HLP_IPV6_SET_MOBILITY_EX, "\
\nUsage %1!s! [[security=]enabled|disabled] \
\n [[bindingcachelimit=]<integer>] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n security - Whether binding updates must be secured.\
\n bindingcachelimit - Maximum number of binding cache entries.\
\n \
\nRemarks: Modifies mobility configuration parameters. \
\n \
\nExample: \
\n \
\n %1!s! security=disabled bindingcachelimit=1000 \
\n\n"
HLP_IPV6_SET_PREFIXPOLICY,
"Modifies prefix policy information.\n"
HLP_IPV6_SET_PREFIXPOLICY_EX, "\
\nUsage %1!s! [prefix=]<IPv6 address>/<integer> [precedence=]<integer> \
\n [label=]<integer> \
\n \
\nParameters: \
\n \
\n Tag Value \
\n prefix - Prefix for which to add a policy. \
\n precedence - Precedence value for ordering. \
\n label - Label value for matching. \
\n \
\nRemarks: Modifies a source and destination address selection policy \
\n for a given prefix. \
\n \
\nExample: \
\n \
\n %1!s! ::/96 3 4 \
\n\n"
HLP_IPV6_SET_PRIVACY,
"Modifies privacy configuration parameters.\n"
HLP_IPV6_SET_PRIVACY_EX, "\
\nUsage %1!s! [[state=]enabled|disabled] [[maxdadattempts=]<integer>] \
\n [[maxvalidlifetime=]<integer>] \
\n [[maxpreferredlifetime=]<integer>] \
\n [[regeneratetime=]<integer>] \
\n [[maxrandomtime=]<integer>] [[randomtime=]<integer>] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n state - Whether anonymous addresses are enabled. \
\n maxdadattempts - Duplicate address detection attempts. \
\n The default value is 5. \
\n maxvalidlifetime - Maximum lifetime, in seconds, over which \
\n an anonymous address is valid. The \
\n default value is 604800 (one week). \
\n maxpreferredlifetime - Maximum lifetime, in seconds, over which \
\n an anonymous address is preferred. The \
\n default value is 86400 (one day). \
\n regeneratetime - Time, in seconds prior to deprecating an \
\n anonymous address, that a new address is \
\n generated. The default value is 5. \
\n maxrandomtime - Upper bound, in seconds, to use when \
\n computing a random delay at startup time.\
\n The default value is 600 (ten minutes). \
\n randomtime - Actual value, in seconds, to use rather \
\n than a random value generated at boot. \
\n \
\nRemarks: Modifies parameters related to anonymous address generation. \
\n If randomtime is specified, the maxrandomtime value is not \
\n used. \
\n\n"
HLP_IPV6_SET_ROUTE,
"Modifies route parameters.\n"
HLP_IPV6_SET_ROUTE_EX, "\
\nUsage %1!s! [prefix=]<IPv6 address>/<integer> [interface=]<string> \
\n [[nexthop=]<IPv6 address>] [[siteprefixlength=]<integer>] \
\n [[metric=]<integer>] [[publish=]no|yes|immortal] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n prefix - Prefix of route to modify. \
\n interface - Interface name or index. \
\n nexthop - Gateway address, if prefix is not on-link. \
\n siteprefixlength - Prefix length for the entire site, if on-link. \
\n metric - Route metric. \
\n publish - One of the following values: \
\n no: Not advertised in Route Advertisements. \
\n This is the default. \
\n yes: Advertised in Route Advertisements. \
\n immortal: Advertised in Route Advertisements \
\n with an infinite lifetime. \
\n \
\nRemarks: Modifies route parameters. \
\n \
\nExample: \
\n \
\n %1!s! 3ffe::/16 ""Internet"" fe80::1 \
\n\n"
HLP_IPV6_DEL_ADDRESS,
"Deletes an IPv6 address from an interface.\n"
HLP_IPV6_DEL_ADDRESS_EX, "\
\nUsage %1!s! [interface=]<string> [address=]<IPv6 address> \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index. \
\n address - IPv6 address to delete. \
\n \
\nRemarks: Modifies an IPv6 address on a given interface. \
\n \
\nExample: \
\n \
\n %1!s! ""Private"" fe80::2 \
\n\n"
HLP_IPV6_DEL_INTERFACE,
"Deletes an interface from the IPv6 stack.\n"
HLP_IPV6_DEL_INTERFACE_EX, "\
\nUsage %1!s! [interface=]<string> \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index. \
\n \
\nRemarks: Deletes a given interface from the IPv6 stack. \
\n \
\nExample: \
\n \
\n %1!s! ""Private"" \
\n\n"
HLP_IPV6_DEL_NEIGHBORS,
"Deletes the IPv6 neighbor cache.\n"
HLP_IPV6_DEL_NEIGHBORS_EX, "\
\nUsage %1!s! [[interface=]<string> [[address=]<IPv6 address>]] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index. \
\n address - Address of neighbor. \
\n \
\nRemarks: Flushes the neighbor cache. If an interface is specified, \
\n flushes the cache only on that interface. If an address is\
\n also specified, deletes only that neighbor cache entry. \
\n \
\nExample: \
\n \
\n %1!s! ""Private"" \
\n\n"
HLP_IPV6_DEL_PREFIXPOLICY,
"Deletes a prefix policy entry.\n"
HLP_IPV6_DEL_PREFIXPOLICY_EX, "\
\nUsage %1!s! [prefix=]<IPv6 address>/<integer> \
\n \
\nParameters: \
\n \
\n Tag Value \
\n prefix - Prefix for which to add a policy. \
\n \
\nRemarks: Deletes the source and destination address selection policy \
\n for a given prefix. \
\n \
\nExample: \
\n \
\n %1!s! ::/96 \
\n\n"
HLP_IPV6_DEL_ROUTE,
"Deletes an IPv6 route.\n"
HLP_IPV6_DEL_ROUTE_EX, "\
\nUsage %1!s! [prefix=]<IPv6 address>/<integer> [interface=]<string> \
\n [[nexthop=]<IPv6 address>] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n prefix - Prefix of route to delete. \
\n interface - Interface name or index. \
\n nexthop - Gateway address, if prefix is not on-link. \
\n \
\nRemarks: Deletes an IPv6 route. \
\n \
\nExample: \
\n \
\n %1!s! 3ffe::/16 ""Internet"" fe80::1 \
\n\n"
HLP_IPV6_DEL_DESTINATIONCACHE,
"Deletes the IPv6 destination cache.\n"
HLP_IPV6_DEL_DESTINATIONCACHE_EX, "\
\nUsage %1!s! [[interface=]<string> [[address=]<IPv6 address>]] \
\n [[level=]normal|verbose] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index. \
\n address - Address of destination. \
\n level - One of the following values: \
\n normal: Display one line per entry. This is \
\n the default. \
\n verbose: Display extra information on each \
\n entry. This is the default when a single\
\n entry is specified. \
\n \
\nRemarks: Flushes the destination cache. If an interface is specified,\
\n flushes the cache only on that interface. If an address is \
\n also specified, deletes only that destination cache entry. \
\n \
\nExample: \
\n \
\n %1!s! ""Private"" \
\n\n"
HLP_IPV6_SHOW_ADDRESS,
"Shows IPv6 addresses.\n"
HLP_IPV6_SHOW_ADDRESS_EX, "\
\nUsage %1!s! [[interface=]<string>] [[level=]normal|verbose] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index. \
\n level - One of the following values: \
\n normal: Display one line per interface. This is \
\n the default when no interface is given. \
\n verbose: Display extra information on each \
\n interface. This is the default when an \
\n interface is given. \
\n \
\nRemarks: Displays all IPv6 addresses, or all addresses on a given \
\n interface if one is specified. \
\n\n"
HLP_IPV6_SHOW_JOINS,
"Shows IPv6 multicast addresses.\n"
HLP_IPV6_SHOW_JOINS_EX, "\
\nUsage %1!s! [[interface=]<string>] [[level=]normal|verbose] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index. \
\n level - One of the following values: \
\n normal: Display one line per interface. This is \
\n the default when no interface is given. \
\n verbose: Display extra information on each \
\n interface. This is the default when an \
\n interface is given. \
\n \
\nRemarks: Displays all IPv6 multicast addresses, or all multicast \
\n addresses on a given interface if one is specified. \
\n\n"
HLP_IPV6_SHOW_BINDINGCACHEENTRIES,
"Shows binding cache entries.\n"
HLP_IPV6_SHOW_BINDINGCACHEENTRIES_EX, "\
\nUsage %1!s! \
\n \
\nRemarks: Displays all binding cache entries.\
\n\n"
HLP_IPV6_SHOW_INTERFACE,
"Shows interface parameters.\n"
HLP_IPV6_SHOW_INTERFACE_EX, "\
\nUsage %1!s! [[interface=]<string>] [[level=]normal|verbose] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index. \
\n level - One of the following values: \
\n normal: Display one line per interface. This is \
\n the default when no interface is given. \
\n verbose: Display extra information on each \
\n interface. This is the default when an \
\n interface is given. \
\n \
\nRemarks: Displays information about all interfaces, or about a given \
\n interface if one is specified. \
\n\n"
HLP_IPV6_SHOW_GLOBAL,
"Shows global configuration parameters.\n"
HLP_IPV6_SHOW_GLOBAL_EX, "\
\nUsage %1!s! \
\n \
\nRemarks: Shows global configuration parameters. \
\n\n"
HLP_IPV6_SHOW_MOBILITY,
"Shows mobility configuration parameters.\n"
HLP_IPV6_SHOW_MOBILITY_EX, "\
\nUsage %1!s! \
\n \
\nRemarks: Shows mobility configuration parameters. \
\n\n"
HLP_IPV6_SHOW_NEIGHBORS,
"Shows neighbor cache entries.\n"
HLP_IPV6_SHOW_NEIGHBORS_EX, "\
\nUsage %1!s! [[interface=]<string> [[address=]<IPv6 address>]] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index. \
\n address - Address of neighbor. \
\n \
\nRemarks: Shows neighbor cache entries. If an interface is specified,\
\n shows the cache only on that interface. If an address is \
\n also specified, shows only that neighbor cache entry. \
\n\n"
HLP_IPV6_SHOW_PREFIXPOLICY,
"Shows prefix policy entries.\n"
HLP_IPV6_SHOW_PREFIXPOLICY_EX, "\
\nUsage %1!s! \
\n \
\nRemarks: Shows prefix policy entries used in source and destination\
\n address selection. \
\n\n"
HLP_IPV6_SHOW_PRIVACY,
"Shows privacy configuration parameters.\n"
HLP_IPV6_SHOW_PRIVACY_EX, "\
\nUsage %1!s! \
\n \
\nRemarks: Shows privacy configuration parameters. \
\n\n"
HLP_IPV6_SHOW_ROUTES,
"Shows route table entries.\n"
HLP_IPV6_SHOW_ROUTES_EX, "\
\nUsage %1!s! [[level=]normal|verbose] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n level - One of the following values: \
\n normal: Display normal routes only. This is the default.\
\n verbose: Also display routes used for loopback. \
\n \
\nRemarks: Shows route table entries. \
\n\n"
HLP_IPV6_SHOW_DESTINATIONCACHE,
"Shows destination cache entries.\n"
HLP_IPV6_SHOW_DESTINATIONCACHE_EX, "\
\nUsage %1!s! [[interface=]<string> [[address=]<IPv6 address>]] \
\n \
\nParameters: \
\n \
\n Tag Value \
\n interface - Interface name or index. \
\n address - Address of destination. \
\n \
\nRemarks: Shows destination cache entries. If an interface is specified, \
\n shows the cache only on that interface. If an address is \
\n also specified, shows only that destination cache entry. \
\n\n"
HLP_IPV6_SHOW_SITEPREFIXES,
"Shows site prefix table entries.\n"
HLP_IPV6_SHOW_SITEPREFIXES_EX, "\
\nUsage %1!s! \
\n \
\nRemarks: Displays the site prefix table.\
\n\n"
HLP_GROUP_ADD, "Adds a configuration entry to a table.\n"
HLP_GROUP_DELETE, "Deletes a configuration entry from a table.\n"
HLP_GROUP_SET, "Sets configuration information.\n"
HLP_GROUP_SHOW, "Displays information.\n"
STRING_LOOPBACK, "Loopback"
STRING_TUNNEL_AUTO, "Automatic Tunneling Pseudo-Interface"
STRING_TUNNEL_6TO4, "6to4 Tunneling Pseudo-Interface"
STRING_YES, "Yes"
STRING_NO, "No"
STRING_NEVER, "Never"
STRING_SYSTEM, "System"
STRING_MANUAL, "Manual"
STRING_AUTOCONF, "Autoconf"
STRING_RIP, "RIP"
STRING_OSPF, "OSPF"
STRING_BGP, "BGP"
STRING_IDRP, "IDRP"
STRING_IGRP, "IGRP"
STRING_PUBLIC, "Public"
STRING_ANONYMOUS, "Anonymous"
STRING_DHCP, "DHCP"
STRING_WELLKNOWN, "Well-known"
STRING_RA, "RA"
STRING_RANDOM, "Random"
STRING_LL_ADDRESS, "Link-Layer Address"
STRING_OTHER, "Other"
STRING_INTERFACE, "Interface"
STRING_LINK, "Link"
STRING_SUBNET, "Subnet"
STRING_ADMIN, "Admin"
STRING_SITE, "Site"
STRING_ORG, "Organization"
STRING_GLOBAL, "Global"
STRING_CONNECTED, "Connected"
STRING_DISCONNECTED, "Disconnected"
STRING_RECONNECTED, "Reconnecting"
STRING_UNKNOWN, "?"
STRING_INVALID, "Invalid"
STRING_DUPLICATE, "Duplicate"
STRING_TENTATIVE, "Tentative"
STRING_DEPRECATED, "Deprecated"
STRING_PREFERRED, "Preferred"
MSG_IP6TO4_STATE, "6to4 Service State : %1!s!\n"
MSG_ROUTING_STATE, "Routing State : %1!s!\n"
MSG_SITELOCALS_STATE, "Use SiteLocals : %1!s!\n"
MSG_RESOLUTION_STATE, "Use Relay : %1!s!\n"
MSG_RELAY_NAME, "Relay Name : "
MSG_STRING, "%1!s!\n"
MSG_CSTRING, "%1!hs!\n"
MSG_RESOLUTION_INTERVAL, "Resolution Interval : "
MSG_MINUTES, "%1!d! minutes\n"
MSG_UNDO_ON_STOP_STATE, "Undo on Service Stop: %1!s!\n"
MSG_6OVER4_STATE, "6over4 State : %1!s!\n"
MSG_IPV6_GLOBAL_PARAMETERS, "\
General Global Parameters \n\
---------------------------------------------\n\
Default Hop Limit : %1!u!\n\
Neighbor Cache Limit : %2!u!\n\
Route Cache Limit : %3!u!\n"
MSG_IPV6_PRIVACY_PARAMETERS, "\
Anonymous Address Parameters \n\
---------------------------------------------\n\
Use Anonymous Addresses : %1!s!\n\
Duplicate Address Detection Attempts: %2!u!\n\
Maximum Valid Lifetime : %3!u! seconds\n\
Maximum Preferred Lifetime : %4!u! seconds\n\
Regenerate Time : %5!u! seconds\n\
Maximum Random Time : %6!u! seconds\n\
Random Time : %7!u! seconds\n"
MSG_IPV6_MOBILITY_PARAMETERS, "\
Mobility Parameters \n\
---------------------------------------------\n\
Security : %1!s!\n\
Binding Cache Limit : %2!u!\n"
MSG_IPV6_PREFIX_POLICY_HDR, "\
Precedence Label Prefix\n\
---------- ----- --------------------------------\n"
MSG_IPV6_PREFIX_POLICY, "\
%2!10u! %3!5u! %1!s!\n"
MSG_IPV6_SITE_PREFIX_HDR, "\
Prefix Lifetime Interface\n\
----------------------- -------- ------------------------------\n"
MSG_IPV6_SITE_PREFIX, "\
%1!-23s! -> %2!8u! %3!s!\n"
MSG_IPV6_INTERFACE_HDR, "\
Idx Met MTU State Name\n\
--- --- ----- ------------ -----\n"
MSG_IPV6_INTERFACE, "\
%1!3u! %2!3u! %3!5u! %4!-12s! %5!s!\n"
MSG_IPV6_INTERFACE_VERBOSE, "\n\
GUID : %1!hs!\n\
State : %2!s!\n\
Metric : %3!u!\n\
Link MTU : %4!u! bytes\n\
True Link MTU : %5!u! bytes\n\
Current Hop Limit : %6!u!\n\
Reachable Time : %7!u! seconds\n\
Base Reachable Time : %8!u! seconds\n\
Retransmission Interval : %9!u! seconds\n\
DAD Transmits : %10!u!\n\
DNS Suffix : %11!s!\n"
MSG_IPV6_LL_ADDRESS, "\
Link-Layer Address : %1!s!\n"
MSG_IPV6_REMOTE_LL_ADDRESS, "\
Remote Link-Layer Address: %1!s!\n"
MSG_IPV6_INTERFACE_SCOPE, "\
Zone ID for %1!-13s!: %2!u!\n"
MSG_IPV6_ND_ENABLED, "\
Uses Neighbor Discovery : "
MSG_IPV6_SENDS_RAS, "\
Sends RA's : "
MSG_IPV6_FORWARDS, "\
Forwards Packets : "
MSG_IPV6_ADDRESS_HDR, "\
\nInterface %1!u!: %2!s!\n\n\
Addr Type DAD State Valid Life Pref. Life Address\n\
--------- ---------- ---------- ---------- -----------------------------------\n"
MSG_IPV6_UNICAST_ADDRESS, "\
%1!-10s! %2!-10s! %4!10u! %5!10u! %3!s!\n"
MSG_IPV6_ANYCAST_ADDRESS, "\
Anycast %1!s!\n"
MSG_IPV6_ANYCAST_ADDRESS_VERBOSE, "\n\
Anycast Address : %1!s!\n\
Scope : %2!s!\n"
MSG_IPV6_ADDRESS_HDR_VERBOSE, "\
\nInterface %1!u!: %2!s!\n"
MSG_IPV6_UNICAST_ADDRESS_VERBOSE, "\n\
Unicast Address : %3!s!\n\
Type : %1!s!\n\
DAD State : %2!s!\n\
Valid lifetime : %4!u! seconds\n\
Preferred lifetime: %5!u! seconds\n\
Scope : %6!s!\n"
MSG_IPV6_PREFIX_ORIGIN, "\
Prefix Origin : "
MSG_IPV6_IID_ORIGIN, "\
Suffix Origin : "
MSG_IPV6_MULTICAST_ADDRESS_HDR, "\
\nInterface %1!u!: %2!s!\n\n\
Scope References ReportTime Last Address\n\
---------- ---------- ---------- ---- -----------------------------------\n"
MSG_IPV6_MULTICAST_ADDRESS, "\
%1!-10s! %3!10u! %4!-10s! %5!-4s! %2!s!\n"
MSG_IPV6_MULTICAST_ADDRESS_VERBOSE, "\n\
Multicast Address : %2!s!\n\
Scope : %1!s!\n\
References : %3!u!\n\
Next Report Time : %4!u! seconds\n\
Last Reporter? : %5!s!\n"
MSG_IPV6_NEIGHBOR_CACHE_HDR, "\n\
Interface %1!u!: %2!s!\n\n\
Internet Address Physical Address Type\n\
-------------------------------------------- ----------------- -----------\n"
MSG_IPV6_NEIGHBOR_CACHE_ENTRY, "\
%1!-44s! %2!-17s! "
MSG_IPV6_NEIGHBOR_INCOMPLETE, "Incomplete"
MSG_IPV6_NEIGHBOR_PROBE, "Probe"
MSG_IPV6_NEIGHBOR_DELAY, "Delay"
MSG_IPV6_NEIGHBOR_STALE, "Stale"
MSG_IPV6_NEIGHBOR_REACHABLE, "Reachable (%1!u! sec)"
MSG_IPV6_NEIGHBOR_PERMANENT, "Permanent"
MSG_IPV6_NEIGHBOR_UNKNOWN, "%1!u!"
MSG_IPV6_NEIGHBOR_ISROUTER, " (router)"
MSG_IPV6_NEIGHBOR_UNREACHABLE, "Unreachable"
MSG_IPV6_DESTINATION_HDR, "\n\
Interface %1!u!: %2!s!\n\n\
PMTU Destination Address Next Hop Address \n\
---- ---------------------------------- ----------------------------------\n"
MSG_IPV6_DESTINATION_ENTRY, "%1!4u! %2!-35s! "
MSG_IPV6_DESTINATION_NEXTHOP, "%1!-35s!\n"
MSG_IPV6_DESTINATION_HDR_VERBOSE, "\n\
Interface %1!u!: %2!s!\n\n"
MSG_IPV6_DESTINATION_ENTRY_VERBOSE, "\
Destination : %2!s!\n\
PMTU : %1!u!\n"
MSG_IPV6_DESTINATION_NEXTHOP_VERBOSE, "\
Next Hop Address : %1!s!\n"
MSG_IPV6_DESTINATION_SOURCE_ADDR, "\
Source Address : %1!s!\n"
MSG_IPV6_ZONE_SPECIFIC, "\
Constraint : Zone-specific\n"
MSG_IPV6_IF_SPECIFIC, "\
Constraint : Interface-specific\n"
MSG_IPV6_ICMP_ERROR_TIME, "\
Last ICMP error sent : %1!u! seconds\n"
MSG_IPV6_PMTU_PROBE_TIME, "\
Time until PMTU probe : %1!u! seconds\n"
MSG_IPV6_CAREOF, "\
Care-of Address : %1!s!\n\
Binding Sequence Number: %2!u!\n\
Binding Lifetime : %3!u! seconds\n"
MSG_IPV6_STALE, "\
Stale : %1!s!\n"
MSG_IPV6_ROUTE_TABLE_HDR, "\
Publish Type Met Prefix Idx Gateway/Interface Name\n\
------- -------- --- ------------------------ --- ------------------------\n"
MSG_IPV6_ROUTE_TABLE_ENTRY, "%5!-8s! %6!-8s! %4!3u! %1!-24s! %2!3u! %3!s!\n"
MSG_IPV6_ROUTE_TABLE_ENTRY_VERBOSE, "\n\
Prefix : %1!s!\n\
Interface %2!-7u! : %7!s!\n\
Gateway : %3!s!\n\
Metric : %4!u!\n\
Publish : %5!s!\n\
Type : %6!s!\n\
Valid Lifetime : %8!u! seconds\n\
Preferred Lifetime: %9!u! seconds\n\
Site Prefix Length: %10!u!\n"
MSG_IPV6_INTEGER, "%1!u!"
// error messages for IfIp
EMSG_PROTO_NOT_INSTALLED, "IPv6 is not installed.\n"
EMSG_NO_WRITE_LOCK, "\
\nThe write lock could not be acquired.\
\nYou must close %1!s! first.\n"
EMSG_REBOOT_NEEDED, "A reboot is required to complete this action.\n"
EMSG_INVALID_INTERFACE, "\
\nInvalid interface %1!s! specified.\n"
EMSG_INVALID_ADDRESS, "\
\nInvalid local IP address specified.\n"
// error messages from ipv6
IPV6_MESSAGE_126, "bad home address %1!s!\n"
IPV6_MESSAGE_127, "home: %1!s!\n"
IPV6_MESSAGE_128, " c/o: %1!s!\n"
IPV6_MESSAGE_129, " seq: %1!u! Lifetime: %2!u!s\n\n"
// ifip messages
MSG_DHCP, " \
DHCP enabled: Yes\n"
MSG_STATIC, " \
DHCP enabled: No\n"
MSG_OPTIONS_LIST, "\
OptionsList:%1!s!\n"
MSG_ADDR2, " "
MSG_ADDR1, " %1!s! \n"
MSG_OPTION, "\
\t%1!-16s! %2!s!\n"
MSG_NONE, " \
None \n"
MSG_DEBUG_HDR, "\
\n==================Debug========================\n"
MSG_IP_NO_ENTRIES, "No entries were found.\n"
MSG_NO_SUCH_IF "Interface %1!s! does not exist.\n"
MSG_CTRL_C_TO_QUIT, "\nEnter Ctrl-C to exit from refresh\n"
// The DUMP comments
//
DMP_IPV6_HEADER_COMMENTS, "#========================\n# Interface configuration\n#========================\n"
DMP_IPV6_FOOTER_COMMENTS, "# End of interface configuration\n\n"
DMP_IP6TO4_HEADER, "\n\
\n# ---------------------------------- \
\n# Interface IPv6 Configuration \
\n# ---------------------------------- \
\n"
DMP_IP6TO4_FOOTER, "# End of interface IPv6 configuration\n\n"
DMP_IP6TO4_INTERFACE_HEADER, "\n\
\n# Interface IPv6 Configuration for %1!s!\n"
}
#include <windows.h>
#include <ntverp.h>
#define VER_FILETYPE VFT_DLL
#define VER_FILESUBTYPE VFT2_UNKNOWN
#define VER_FILEDESCRIPTION_STR "IF Monitor DLL"
#define VER_INTERNALNAME_STR "ifmon.dll"
#define VER_ORIGINALFILENAME_STR "ifmon.dll"
#include "common.ver" // NT5.0 version file.