windows-nt/Source/XPSP1/NT/tools/postbuildscripts/drvcabck.cmd

296 lines
8.6 KiB
Batchfile
Raw Normal View History

2020-09-26 03:20:57 -05:00
@echo off
REM ------------------------------------------------------------------
REM
REM drvcabck.cmd
REM Generates drvindex.inf files for each sku
REM
REM Copyright (c) Microsoft Corporation. All rights reserved.
REM
REM ------------------------------------------------------------------
if defined _CPCMAGIC goto CPCBegin
perl -x "%~f0" %*
goto :EOF
#!perl
use strict;
use lib $ENV{RAZZLETOOLPATH} . "\\PostBuildScripts";
use lib $ENV{RAZZLETOOLPATH};
use PbuildEnv;
use ParseArgs;
sub Usage { print<<USAGE; exit(1) }
drvcabck [-l <language>]
Generates drvindex.inf files for each sku
USAGE
parseargs('?' => \&Usage);
# *** NEXT FEW LINES ARE TEMPLATE ***
$ENV{"_CPCMAGIC"}++;exit(system($0)>>8);
__END__
:CPCBegin
set _CPCMAGIC=
setlocal ENABLEDELAYEDEXPANSION ENABLEEXTENSIONS
REM *** BEGIN YOUR CMD SCRIPT BELOW ***
REM 1. Go to the %_nttree% (binaries) directory and link *.inf to the %_nttree%\congeal_scripts\drvgen directory
REM 2. Then do the same to the product specific *.inf i.e. srvinf\*.inf entinf\*.inf etc.
REM In this case link them again to %_nttree%\congeal_scripts\drvgen except we prepend the product specific tag
REM i.e. srvinf\1394.inf -> srvinf1394.inf in that directory
REM 3. Then run drvlist on the %_nttree%\congeal_scripts\drvgen directory (approx. 5 mins) to come out with a sorted.lst of all drivers in the infs.
REM 4. Run cabcheck.exe taking as input sorted.lst and the prod specific layout.inf for each product to give you the generated prod specific drvindex.gen.
REM 5. Finally generate excdosnt.inf and copy drvindex.inf to the binaries directory.
REM
REM Note that winnt32/winnt is not smart enough to not copy files present in the driver cab
REM when processing the [Files] section. However, it will still look for files when looking at
REM BootFiles or the other sections associated with boot files.
REM preconditions
REM 1. infs have been generated in all binaries directories (srvinf, etc.)
REM BUGBUG "myarchitecture" is used inconsistantly below and should probably be removed
REM cksku without -a defaults to _BuildArch
REM ArchSwitch is based on _BuildArch
REM Define "myarchitecture" as the architecture that we're processing.
REM
REM we use the %_BuildArch% variable if it's set, otherwise we fall back on
REM %PROCESSOR_ARCHITECTURE%
REM
if not defined myarchitecture (
if defined _BuildArch (
set myarchitecture=%_BuildArch%
) else (
set myarchitecture=%PROCESSOR_ARCHITECTURE%
)
)
if not defined myarchitecture (
call errmsg.cmd "variable myarchitecture not defined."
goto end
)
set DrvListSwitch=-s
if /i "%_BuildArch%" == "x86" (
set ArchSwitch=i
set DrvListSwitch=-a 0
)
if /i "%_BuildArch%" == "amd64" (
set ArchSwitch=a
set DrvListSwitch=-a 6
)
if /i "%_BuildArch%" == "ia64" (
set ArchSwitch=m
set DrvListSwitch=-a 6
)
if "%DrvListSwitch%" == "-s" (
call errmsg.cmd Need to add DrvListSwitch for %_BuildArch%
goto end
)
echo %myarchitecture%
echo binaries = %_NTPostBld%
REM Verify existence of build directory
pushd .
call ExecuteCmd.cmd "if not exist %_NTPostBld%\congeal_scripts\drvgen md %_NTPostBld%\congeal_scripts\drvgen"
set scratchdir=%_NTPostBld%\congeal_scripts\drvgen
cd /d %_NTPostBld%\congeal_scripts\drvgen
cd
call ExecuteCmd.cmd "if exist ** del /f /q **"
if errorlevel 1 popd& goto end
REM Cleanup infs in proper temp subdirectory
call ExecuteCmd.cmd "if not exist %scratchdir%\%lang%\%myarchitecture% md %scratchdir%\%lang%\%myarchitecture%"
if errorlevel 1 popd& goto end
call ExecuteCmd.cmd "if exist %scratchdir%\%lang%\%myarchitecture%\*.inf del /q /f %scratchdir%\%lang%\%myarchitecture%\*.inf 2>nul"
REM Get the product flavors (per, bla, sbs, srv, ent, dtc) for the given language.
REM wks is applicable to all languages.
set prods=
set dirs=
perl %RazzleToolPath%\cksku.pm -t:per -l:%lang%
if %errorlevel% EQU 0 (
set prods=%prods% per
set _PER=1
set dirs=%dirs% /relpath:perinf
)
perl %RazzleToolPath%\cksku.pm -t:bla -l:%lang%
if %errorlevel% EQU 0 (
set prods=%prods% bla
set _BLA=1
set dirs=%dirs% /relpath:blainf
)
perl %RazzleToolPath%\cksku.pm -t:sbs -l:%lang%
if %errorlevel% EQU 0 (
set prods=%prods% sbs
set _SBS=1
set dirs=%dirs% /relpath:sbsinf
)
perl %RazzleToolPath%\cksku.pm -t:srv -l:%lang%
if %errorlevel% EQU 0 (
set prods=%prods% srv
set _SRV=1
set dirs=%dirs% /relpath:srvinf
)
perl %RazzleToolPath%\cksku.pm -t:ads -l:%lang%
if %errorlevel% EQU 0 (
set prods=%prods% ent
set _ENT=1
set dirs=%dirs% /relpath:entinf
)
perl %RazzleToolPath%\cksku.pm -t:dtc -l:%lang%
if %errorlevel% EQU 0 (
set prods=%prods% dtc
set _DTC=1
set dirs=%dirs% /relpath:dtcinf
)
cd /d %Razzletoolpath%\postbuildscripts
cd
set cmdline=
set cmdline=/cmd1:"drvlist.exe %DrvListSwitch% %scratchdir%\%lang%\%myarchitecture% | sort /o %scratchdir%\%lang%\%myarchitecture%\sorted.lst"
set scriptcmd=
set scriptcmd=%Razzletoolpath%\postbuildscripts\drvmk.pl /fl:%scratchdir%\%lang%\%myarchitecture%\inf.lst /mk:%scratchdir%\%lang%\%myarchitecture%\drvmk /path:%_NTPostBld% %dirs% %cmdline% /t:%scratchdir%\%lang%\%myarchitecture%
echo %scriptcmd%
perl %scriptcmd%
if errorlevel 1 (
call errmsg.cmd "Failed running %scriptcmd% - Run tools\postbuildscripts\drvcabck by itself to debug."
popd
goto end
)
REM Copy the files in binaries\inf to the temp location prepending a qualifier so
REM we have all infs across products in one place and can run drvlist.exe collectively
REM We use the earlier generated inf.lst for this
for /F "eol=; tokens=1,2 delims=, " %%i in (%scratchdir%\%lang%\%myarchitecture%\inf.lst) do (
copy /y %%i %scratchdir%\%lang%\%myarchitecture%\%%j
if errorlevel 1 popd& goto end
)
REM kickoff drvlist
REM Fix the registry first to speedup setupapi when running drvlist.exe (supress logging)
call regini %Razzletoolpath%\postbuildscripts\setup_log.txt
cd /d %scratchdir%\%lang%\%myarchitecture%
if errorlevel 1 (
call errmsg.cmd "Failed to cd into %scratchdir%\%lang%\%myarchitecture%"
popd
goto end
)
call logmsg.cmd /t "Starting drvlist through nmake"
call ExecuteCmd.cmd "nmake -f drvmk"
if errorlevel 1 (
call errmsg.cmd "Failed nmake of makefile drvmk in %scratchdir%\%lang%\%myarchitecture%"
popd
goto end
)
call logmsg.cmd /t "drvlist is complete."
cd /d %Razzletoolpath%\postbuildscripts
cd
if not exist %scratchdir%\%lang%\%myarchitecture%\sorted.lst (
call errmsg.cmd /t "%scratchdir%\%lang%\%myarchitecture%\Sorted.lst not created. Drvlist failure."
popd
goto end
)
REM Call cabcheck.exe to generate the drvindex.inf that we think is right
REM WKS - The workstation case
call ExecuteCmd.cmd "cabcheck.exe %scratchdir%\%lang%\%myarchitecture%\layout.inf %scratchdir%\%lang%\%myarchitecture%\Sorted.lst %scratchdir%\%lang%\%myarchitecture%\drvindex.gen /%ArchSwitch%"
if errorlevel 1 (
call errmsg.cmd "Cabcheck.exe Failed to auto-generate the drvindex.inf file"
popd
goto end
)
REM Copy the generated files to its final location.
call ExecuteCmd.cmd "copy /Y %scratchdir%\%lang%\%myarchitecture%\drvindex.gen %_NTPostBld%\drvindex.inf"
if errorlevel 1 (
call errmsg.cmd "Could not copy generated drvindex.inf to %_NTPostBld%"
popd
goto end
)
REM generate the appropriate excdosnt.inf
call ExecuteCmd.cmd "xdosnet %_NTPostBld%\layout.inf %_NTPostBld%\drvindex.inf 1 %scratchdir%\%lang%\%myarchitecture%\foodosnt %myarchitecture% %_NTPostBld%\excdosnt.inf %_NTPostBld%\exclude.inf"
REM Now do the other products - PER BLA SBS SRV ENT DTC
for %%i in (%prods%) do (
call ExecuteCmd.cmd "cabcheck.exe %scratchdir%\%lang%\%myarchitecture%\%%iinflayout.inf %scratchdir%\%lang%\%myarchitecture%\Sorted.lst %scratchdir%\%lang%\%myarchitecture%\%%iinfdrvindex.gen /%ArchSwitch%"
if errorlevel 1 (
call errmsg.cmd "Cabcheck.exe Failed to auto-generate the drvindex.inf file"
popd
goto end
)
REM Copy the generated files to its final location.
call ExecuteCmd.cmd "copy /Y %scratchdir%\%lang%\%myarchitecture%\%%iinfdrvindex.gen %_NTPostBld%\%%iinf\drvindex.inf"
if errorlevel 1 (
call errmsg.cmd "Could not copy generated %%idrvindex.inf to %_NTPostBld%\%%iinf"
popd
goto end
)
REM generate the appropriate excdosnt.inf
call ExecuteCmd.cmd "xdosnet %_NTPostBld%\%%iinf\layout.inf %_NTPostBld%\%%iinf\drvindex.inf 1 %scratchdir%\%lang%\%myarchitecture%\foodosnt %myarchitecture% %_NTPostBld%\%%iinf\excdosnt.inf %_NTPostBld%\%%iinf\exclude.inf"
)
cd
call logmsg.cmd /t "drvindex.inf generation complete"
goto end
:end
seterror.exe "%errors%"& goto :EOF