// // Diagnostic loader messages. // // // Defines for Class, Detail and Action are used to lookup // text from DiagLoadClass, DiagLoadDetail and DiagLoadAction // respectively. One must change LOAD_CL_END, DIAG_BL_END // and LOAD_ACT_END to reflect any change in the content of // the tables. They are used for bounds checking to avoid // access violations. // // Class Definitions // #define LOAD_SW_INT_ERR_CLASS 0x00000000L #define LOAD_SW_MISRQD_FILE_CLASS 0x00000001L #define LOAD_SW_BAD_FILE_CLASS 0x00000002L #define LOAD_SW_MIS_FILE_CLASS 0x00000003L #define LOAD_HW_MEM_CLASS 0x00000004L #define LOAD_HW_DISK_CLASS 0x00000005L #define LOAD_HW_GEN_ERR_CLASS 0x00000006L #define LOAD_HW_FW_CFG_CLASS 0x00000007L #define LAOD_SW_MISMATCHED_KERNEL 0x00000008L #define LOAD_CL_END 0x00000009L // // Class Declarations // static PCHAR DiagLoadClass[] = { "Windows 2000 could not start because of an error in the software.\r\nPlease report this problem as :\r\n\0", "Windows 2000 could not start because the following file was not found\r\nand is required :\r\n\0", "Windows 2000 could not start because of a bad copy of the following file :\r\n\0", "Windows 2000 could not start because the following file is missing or corrupt:\r\n\0", "Windows 2000 could not start because of a hardware memory configuration\r\nproblem.\r\n\0", "Windows 2000 could not start because of a computer disk hardware\r\nconfiguration problem.\r\n\0", "Windows 2000 could not start because of a general computer hardware\r\nconfiguration problem.\r\n\0", "Windows 2000 could not start because of the following ARC firmware\r\nboot configuration problem :\r\n\0", "Windows 2000 could not start because the specified kernel does not exist or\r\nis not compatible with this processor.\r\n\0" }; // // Detail Definitions // #define DIAG_BL_MEMORY_INIT 0L #define DIAG_BL_CONFIG_INIT 1L #define DIAG_BL_IO_INIT 2L #define DIAG_BL_FW_GET_BOOT_DEVICE 3L #define DIAG_BL_OPEN_BOOT_DEVICE 4L #define DIAG_BL_FW_GET_SYSTEM_DEVICE 5L #define DIAG_BL_FW_OPEN_SYSTEM_DEVICE 6L #define DIAG_BL_GET_SYSTEM_PATH 7L #define DIAG_BL_LOAD_SYSTEM_IMAGE 8L #define DIAG_BL_FIND_HAL_IMAGE 9L #define DIAG_BL_LOAD_HAL_IMAGE 10L #define DIAG_BL_LOAD_SYSTEM_IMAGE_DATA 11L #define DIAG_BL_LOAD_HAL_IMAGE_DATA 12L #define DIAG_BL_LOAD_SYSTEM_DLLS 13L #define DIAG_BL_LOAD_HAL_DLLS 14L #define DIAG_BL_READ_SYSTEM_REGISTRY 15L #define DIAG_BL_LOAD_SYSTEM_REGISTRY 16L #define DIAG_BL_FIND_SYSTEM_DRIVERS 17L #define DIAG_BL_READ_SYSTEM_DRIVERS 18L #define DIAG_BL_LOAD_DEVICE_DRIVER 19L #define DIAG_BL_LOAD_SYSTEM_HIVE 20L #define DIAG_BL_SYSTEM_PART_DEV_NAME 21L #define DIAG_BL_BOOT_PART_DEV_NAME 22L #define DIAG_BL_ARC_BOOT_DEV_NAME 23L #define DIAG_BL_ARC_HAL_NAME 24L #define DIAG_BL_SETUP_FOR_NT 25L #define DIAG_BL_KERNEL_INIT_XFER 26L #define DIAG_BL_END 27L // // Detail Declarations // static PCHAR DiagLoadDetail[] = { // DIAG_BL_MEMORY_INIT 0L "Check hardware memory configuration and amount of RAM.\r\n\0", // DIAG_BL_CONFIG_INIT 1L "Too many configuration entries.\r\n\0", // DIAG_BL_IO_INIT 2L "Could not access disk partition tables \r\n\0", // DIAG_BL_FW_GET_BOOT_DEVICE 3L "The 'osloadpartition' parameter setting is invalid.\r\n\0", // DIAG_BL_OPEN_BOOT_DEVICE 4L "Could not read from the selected boot disk. Check boot path\r\nand disk hardware.\r\n\0", // DIAG_BL_FW_GET_SYSTEM_DEVICE 5L "The 'systempartition' parameter setting is invalid.\r\n\0", // DIAG_BL_FW_OPEN_SYSTEM_DEVICE 6L "Could not read from the selected system boot disk.\r\nCheck 'systempartition' path.\r\n\0", // DIAG_BL_GET_SYSTEM_PATH 7L "The 'osloadfilename' parameter does not point to a valid file.\r\n\0", // DIAG_BL_LOAD_SYSTEM_IMAGE 8L "\\system32\\ntoskrnl.exe.\r\n\0", // DIAG_BL_FIND_HAL_IMAGE 9L "The 'osloader' parameter does not point to a valid file.\r\n\0", // DIAG_BL_LOAD_HAL_IMAGE 10L #if defined(i386) "\\system32\\hal.dll.\r\n\0", #endif #if defined(MIPS) "'osloader'\\hal.dll\r\n\0", #endif // DIAG_BL_LOAD_SYSTEM_IMAGE_DATA 11L "Loader error 1.\r\n\0", // DIAG_BL_LOAD_HAL_IMAGE_DATA 12L "Loader error 2.\r\n\0", // DIAG_BL_LOAD_SYSTEM_DLLS 13L "load needed DLLs for kernel.\r\n\0", // DIAG_BL_LOAD_HAL_DLLS 14L "load needed DLLs for HAL.\r\n\0", // DIAG_BL_READ_SYSTEM_REGISTRY 15L "\\system32\\config\\system. \r\n\0", // DIAG_BL_LOAD_SYSTEM_REGISTRY 16L "\\system32\\config\\system. \r\n\0", // DIAG_BL_FIND_SYSTEM_DRIVERS 17L "find system drivers.\r\n\0", // DIAG_BL_READ_SYSTEM_DRIVERS 18L "read system drivers.\r\n\0", // DIAG_BL_LOAD_DEVICE_DRIVER 19L "did not load system boot device driver.\r\n\0", // DIAG_BL_LOAD_SYSTEM_HIVE 20L "load system hardware configuration file.\r\n\0", // DIAG_BL_SYSTEM_PART_DEV_NAME 21L "find system partition name device name.\r\n\0", // DIAG_BL_BOOT_PART_DEV_NAME 22L "find boot partition name.\r\n\0", // DIAG_BL_ARC_BOOT_DEV_NAME 23L "did not properly generate ARC name for HAL and system paths.\r\n\0", // DIAG_BL_ARC_HAL_NAME 24L "did not properly generate ARC name for HAL and system paths.\r\n\0", // DIAG_BL_SETUP_FOR_NT 25L "Loader error 3.\r\n\0", // DIAG_BL_KERNEL_INIT_XFER 26L "\\system32\\ntoskrnl.exe\r\n\0" }; // // Action Definitions // #define LOAD_SW_INT_ERR_ACT 0x00000000L #define LOAD_SW_FILE_REST_ACT 0x00000001L #define LOAD_SW_FILE_REINST_ACT 0x00000002L #define LOAD_HW_MEM_ACT 0x00000003L #define LOAD_HW_DISK_ACT 0x00000004L #define LOAD_HW_GEN_ACT 0x00000005L #define LOAD_HW_FW_CFG_ACT 0x00000006L #define LOAD_ACT_END 0x00000007L // // Action Declarations // static PCHAR DiagLoadAction[] = { "Please contact your support person to report this problem.\r\n\0", "You can attempt to repair this file by starting Windows 2000\r\n" "Setup using the original Setup floppy disk or CD-ROM.\r\n" "Select 'r' at the first screen to start repair.\r\n\0", "Please re-install a copy of the above file.\r\n\0", "Please check the Windows 2000(TM) documentation about hardware\r\nmemory requirements and your hardware reference manuals for\r\nadditional information.\r\n\0", "Please check the Windows 2000(TM) documentation about hardware\r\ndisk configuration and your hardware reference manuals for\r\nadditional information.\r\n\0", "Please check the Windows 2000(TM) documentation about hardware\r\nconfiguration and your hardware reference manuals for additional\r\ninformation.\r\n\0", "Please check the Windows 2000(TM) documentation about ARC configuration\r\noptions and your hardware reference manuals for additional\r\ninformation.\r\n\0" };