[Identification]
	OptionType = NetAdapter
[PlatformsSupported]
	EISA
	PCI
	"Jazz-Internal Bus"
[Options]
	DEC300
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
DEC300_1BYTE    = 3187472
Manufacturer    = "DigitalEquipment"
ProductMajorVersion     = "4"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "Defea"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\defea.sys"
NetRuleSoftwareType     = "defeaSys ndisDriver defeaDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """DefeaSys"" yes no container"
NetRuleSoftwareClass    = {"defeaDriver basic"}
ProductHardwareName     = "Defea"
NetRuleHardwareType     = "dec300 dec300Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"dec300Adapter basic"}
ProductOpSupport     = 134 ; 0x0086 ; Display,Removable,Properties,Not Updatable

ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
Successful_Install = 0
[date]
	Now = {} ? $(!LIBHANDLE) GetSystemDate
[processor]
	PROC_TYPE = "" ? $(LIBHANDLE) GetProcessor
[Identify]
	read-syms Identification
	set Status     = STATUS_SUCCESSFUL
	set Identifier = $(OptionType)
	set Media      = #("Source Media Descriptions", 1, 1)
	Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
	set Status        = STATUS_FAILED
	set OptionList     = {}
	set OptionTextList = {}
	set LanguageList = ^(LanguagesSupported, 1)
	Ifcontains(i) $($0) in $(LanguageList)
		ifstr(i) $($1) == ""
		   goto returnoptions
		endif
		set PlatformList = ^(PlatformsSupported, 1)
		Ifcontains(i) $($1) in $(PlatformList)
		   goto returnoptions
		else
		   set Status = STATUS_NOTSUPPORTED
		   goto finish_ReturnOptions
		endif
	else
		set Status = STATUS_NOLANGUAGE
		goto finish_ReturnOptions
	endif
returnoptions = +
	set OptionList     = ^(Options, 1)
	set OptionTextList = ^(OptionsText$($0), 1)
	set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
	Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
;       set !DebugOutputControl = 1 
	set Option   = $($1)
	set SrcDir   = $($2)
	set AddCopy  = $($3)
	set DoCopy   = $($4)
	set DoConfig = $($5)
	set LanguageList = ^(LanguagesSupported, 1)
	Ifcontains(i) $($0) NOT-IN $(LanguageList)
		Return STATUS_NOLANGUAGE
	endif
	Debug-Output "OEMNADD4.INF: STF_CWDIR is: "$(!STF_CWDIR)
	Debug-Output "OEMNADD4.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
	set-subst LF = "\n"
	SetHelpFile "defddi.hlp" 1 600
	read-syms GeneralConstants
	read-syms FileConstants
	Shell $(UtilityInf), GetBindingInfo, "DEC"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error: cannot get an error string."
		goto ShellCodeError
	endif
	set NetRuleSoftwareBindable = $($R1)
	read-syms DialogConstants$(!STF_LANGUAGE)
	ifstr(i) $(!NTN_Origination) == "NCPA"
		set Continue = $(OK)
	endif
	read-syms FileConstants$(!STF_LANGUAGE)
	detect date
	set-title  $(FunctionTitle)
	set to   = Begin
	set from = Begin
	set CommonStatus = STATUS_SUCCESSFUL
	EndWait
Begin = +
;       set !DebugOutputControl = 1
	Ifstr(i) $(!NTN_InstallMode) == deinstall
		set StartLabel = removeadapter
	else-Ifstr(i) $(!NTN_InstallMode) == Update
		set StartLabel = UpgradeSoftware
	else-Ifstr(i) $(!NTN_InstallMode) == bind
		set StartLabel = bindingadapter
	else-Ifstr(i) $(!NTN_InstallMode) == configure
		set CommonStatus = STATUS_REBOOT
		Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
			Debug-Output "Cannot configure the dec 300 driver software."
			Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error: cannot get an error string."
				goto ShellCodeError
			endif
			set Error = $($R0)
			set from = end
			set to = end
			goto nonfatalinfo
		else
			set StartLabel = configureadapter
		endif
	else
		set StartLabel = installadapter
		set OEM_ABANDON_OPTIONS = {}
		set OEM_ABANDON_SOFTWARE = FALSE
		set OEM_ABANDON_ON = TRUE
	endif
;************ Detect Processor Type *****************    
;	LoadLibrary "" $(!STF_CWDDIR)setupdll.dll LIBHANDLE
;	detect processor
;	FreeLibrary $(LIBHANDLE)
;	ifstr(i) $(PROC_TYPE) == Alpha_AXP
;		set SourceDir = $(SrcDir)WINNT\ALPHA\
;		set UpdateDir = $(SrcDir)WINNT\ALPHA\
;	   else-ifstr(i) $(PROC_TYPE) == R4000
;		set SourceDir = $(SrcDir)WINNT\MIPS\
;		set UpdateDir = $(SrcDir)WINNT\MIPS\
;	   else
;		set SourceDir = $(SrcDir)WINNT\INTEL\
;		set UpdateDir = $(SrcDir)WINNT\INTEL\
;	   endif
;	endif
	Debug-Output "NTN_Origination"$(!NTN_Origination)
	set from = $(fatal)
	set to = $(fatal)
	goto $(StartLabel)
installadapter = +
	goto nextstep
configureadapter = +
	
	Ifstr $(KeyProduct) == $(KeyNull)
		OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
		Ifstr $(KeyProduct) == $(KeyNull)
			set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
			Debug-Output "Cannot find component product key"
			goto fatalregistry
		Endif
	Endif
	
	Debug-Output "INF: Shelling to FindService"
	Shell $(UtilityInf) FindService, $(KeyProduct)
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "INF: FindService shell failure"
		Goto ShellCodeError
	Endif
	Ifstr(i) $($R0) != NO_ERROR
		Debug-Output "INF: FindService Shell error: "$($R0)
		Goto fatalregistry
	endif

	Set KeyParameters = $($R2)
	CloseRegKey $($R1)

	Ifstr $(KeyParameters) == $(KeyNull)
		set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
		Debug-Output "Cannot find component service"
		goto fatalregistry
	endif
	set OldVersionExisted = $(TRUE)
	set ValueName = ""
	set ValueData = ""
	set ValueStr  = ""
	set ValueList = {}
	
	EnumRegValue $(KeyParameters) ValueList
;***************** Read Registry Info for Defaults *****************
	ForListDo $(ValueList)
		set ValueItem = $($)
		set ValueName = *($(ValueItem),1)
		set ValueData = *($(ValueItem),4)
		ifstr(i) $(ValueName) == "BurstSize"
			set BurstSizeIndex = $(ValueData)
		else-ifstr(i) $(ValueName) == "FullDuplexEnable"
			set FullDuplexEnableIndex = $(ValueData)
		else-ifstr(i) $(ValueName) == "RcvBuffCnt"
			set RcvBuffCntIndex = $(ValueData)
		else-ifstr(i) $(ValueName) == "XmtBuffCnt"
			set XmtBuffCntIndex = $(ValueData) 
		else-ifstr(i) $(ValueName) == "RequestedTTRT"
			set RequestedTTRTIndex = $(ValueData)
		else-ifstr(i) $(ValueName) == "SlotNumber"
			set SlotNumber = $(ValueData)
		endif
	EndForListDo
	
	Set Caption = $(FunctionTitle)
	Set Label1  = "Slot #"$(SlotNumber)
	ifstr(i) $(FullDuplexEnableIndex) == 1
		set RadioIn = {1}
	else
		set RadioIn = {2}
	endif

	ifstr(i) $(RequestedTTRTIndex) == ""
		set EditTextIn = {8}
	else
		set EditTextIn = {$(RequestedTTRTIndex)}
	endif

	set BurstSizeValue = *($(BurstSizeList), ~($(BurstSizeValues),$(BurstSizeIndex)))
	ifstr(i) $(BurstSizeValue) == ""
		set BurstSizeValue = 16
	endif

	set ReceiveBuffValue = *($(ReceiveBuffList), ~($(ReceiveBuffValues),$(RcvBuffCntIndex)))
	ifstr(i) $(ReceiveBuffValue) == ""
		set ReceiveBuffValue = 4
	endif

	set TransmitBuffValue = *($(TransmitBuffList), ~($(TransmitBuffValues),$(XmtBuffCntIndex)))
	ifstr(i) $(TransmitBuffValue) == ""
		set TransmitBuffValue = 32
	endif

	set RequestedTTRTValue = RequestedTTRTIndex
	ifstr(i) $(RequestedTTRTValue) == ""
		set RequestedTTRTValue = 8
	endif

;***************** Display the Dialog ******************************
displaydialog = +    

	set ExitButton = ""
        LoadLibrary "x" $(!STF_WINDOWSSYSPATH)\$(DialogDllName) hLib
	
	read-syms FileDependentDlg$(!STF_LANGUAGE)
restart = +    
	set NotifyFields = {YES,NO,NO}
	ui start "InputDlg" $(hLib)
	set ExitButton = $(DLGEVENT)
	ifstr(i) $(DLGEVENT) == "CONTINUE"
		ifint *($(EditTextOut),1) < 4
			shell $(subroutineinf) SetupMessage ENG NONFATAL "Value of Requested TTRT must be between 4 and 165 ms"
			goto restart
		else-ifint *($(EditTextOut),1) > 165
			shell $(subroutineinf) SetupMessage ENG NONFATAL "Value of Requested TTRT must be between 4 and 165 ms"
			goto restart
		endif
		set BurstSizeIndex = *($(BurstSizeValues), ~($(BurstSizeList),$(Combo1Out)))
		set TransmitBuffIndex = *($(TransmitBuffValues), ~($(TransmitBuffList),$(Combo3Out)))
		set ReceiveBuffIndex = *($(ReceiveBuffValues), ~($(ReceiveBuffList),$(Combo2Out)))
		ifstr(i) *($(RadioOut),1) == 1
			Set FullDuplexEnableIndex = 1
		else
			Set FullDuplexEnableIndex = 2
		endif
		set RequestedTTRTIndex = *($(EditTextOut),1)
		FreeLibrary $(hLib)
		ui pop 1
		ifstr(i) $(StartLabel) == installadapter
			Set Successful_Install = 1
			goto returnpoint
		endif
	else-ifstr(i) $(DLGEVENT) == "NOTIFY"
;                ifstr(i) $(Combo1Out) != 16
;                        shell $(subroutineinf) SetupMessage ENG NONFATAL "If supported by the adapter, a burst size of 16 longwords is recommended."
;                endif
		goto restart
	else-ifstr(i) $(DLGEVENT) == "BACK"
		FreeLibrary $(hLib)
		ui pop 1
		ifstr(i) $(StartLabel) == installadapter
			goto returnpoint
		else
			CloseRegKey $(KeyParameters)
			set CommonStatus = STATUS_USERCANCEL
			goto end
		endif
	else
		FreeLibrary $(hLib)
		ui pop 1
		goto end
	endif
	set NewValueList = {{RcvBuffCnt,$(NoTitle),$(!REG_VT_DWORD),$(ReceiveBuffIndex)},+
						{BurstSize,$(NoTitle),$(!REG_VT_DWORD),$(BurstSizeIndex)},+
						{XmtBuffCnt,$(NoTitle),$(!REG_VT_DWORD),$(TransmitBuffIndex)},+
						{FullDuplexEnable,$(NoTitle),$(!REG_VT_DWORD),$(FullDuplexEnableIndex)},+
						{RequestedTTRT,$(NoTitle),$(!REG_VT_DWORD),$(RequestedTTRTIndex)}}
		  
	Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	CloseRegKey $(KeyParameters)
	goto successful
nextstep = +
	StartWait
installproduct = +
	Shell $(UtilityInf), EISAFindBus, $(DEC300_1BYTE)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	ifstr $($R0) != "NO_ERROR"
		set Error = $($R0)
		goto fatal
	endif
	ifstr(i) $($R1) == {}
		set Error = $(CANNOT_FIND_ANY_CARD)
		set CommonStatus = STATUS_USERCANCEL
		set from = end
		goto nonfatal
	endif
	set AdapterList = $($R1)
;**************** Install Hardware Component For Each***********************
;**************** Card and Store Params. In a List *************************
	Set AllAdaptersInstalled = $(TRUE)
	ForListDo $(AdapterList)
		set BusNum = *($($),1)
		set SlotNum = *($($),2)
		Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
			$(SlotNum), $(ProductHardwareDescription), $(ProductHardwareName)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif
		ifstr $($R0) != "NO_ERROR"
			set Error = $($R0)
			goto fatal
		endif
		ifstr(i) $($R1) != "YES"
				Set AllAdaptersInstalled = $(FALSE)
				Set ReceiveBuffValue = 4
				Set TransmitBuffValue = 32
				Set BurstSizeValue = 16
				Set EditTextIn = {"8"}
				Set RadioIn = {2}
				Set Caption = $(FunctionTitle)
				Set Label1  = "Slot #"$(SlotNum)
				Set ExitButton = ""
				goto displaydialog
		else
				Set ExitButton = ""
				Set OldVersionExisted = $(TRUE)
		endif
returnpoint = +
		ifstr(i) $(ExitButton) == "CONTINUE"
			Set List1 = >($(List1),$(BusNum))
			Set List2 = >($(List2),$(SlotNum))
			Set List3 = >($(List3),$(ReceiveBuffIndex))
			Set List4 = >($(List4),$(BurstSizeIndex))
			Set List5 = >($(List5),$(TransmitBuffIndex))
			Set List6 = >($(List6),$(FullDuplexEnableIndex))
			Set List7 = >($(List7),$(RequestedTTRTIndex))
		endif
	EndForListDo
	ifstr(i) $(AllAdaptersInstalled) == $(TRUE)
		shell $(subroutineinf) SetupMessage ENG NONFATAL "All DEC FDDIcontroller/EISA adapters already installed"
	endif

;*************** Install Software Component If Needed*******************    
	ifstr(i) $(Successful_Install) == 1
		Debug-Output "Successful Install"
	ifint $(OldVersionExisted) == $(FALSE)
		Ifstr(i) $(DoCopy) == "YES"
		   Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
		   Ifint $($ShellCode) != $(!SHELL_CODE_OK)
			   Goto ShellCodeError
		   Else-Ifstr(i) $($R0) == STATUS_FAILED
			   Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
			   ifint $($ShellCode) != $(!SHELL_CODE_OK)
				  goto ShellCodeError
			   endif
			   set Error = $($R0)
			   Goto fatal
		   Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
			   Goto successful
		   Endif
		   Set SrcDir = $($R1)
		Endif
		install "Install-Option"
		ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
		   Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
		   ifint $($ShellCode) != $(!SHELL_CODE_OK)
			   goto ShellCodeError
		   endif
		   set Error = $($R0)
		   goto fatal
		endif
		Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
			$(ProductSoftwareName), +
			$(ProductSoftwareName), +
			$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
			$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
			$(NetEventDLL)
		Set OEM_ABANDON_SOFTWARE = TRUE
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
			EndWait
			CloseRegKey $($R1)
			CloseRegKey $($R2)
			CloseRegKey $($R3)
			CloseRegKey $($R4)
			CloseRegKey $($R5)
			goto fatalregistry
		endif
		Set SoftProductKey      = $($R1)
		Set SoftNetRuleKey      = $($R2)
		Set SoftServiceKey      = $($R3)
		Set SoftParameterKey    = $($R4)
		Set SoftLinkageKey      = $($R5)
		set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
						   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
						   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
						   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
						   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
						   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
						   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
		Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
			EndWait
			CloseRegKey $(SoftProductKey)
			CloseRegKey $(SoftNetRuleKey)
			CloseRegKey $(SoftServiceKey)
			CloseRegKey $(SoftParameterKey)
			CloseRegKey $(SoftLinkageKey)
			goto fatalregistry
		endif
		set BindableTxt  = {"defeaDriver dec300Adapter non exclusive 100"}
		set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
							{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
							{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
							{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
							{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(BindableTxt)}, +
							{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
		Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		CloseRegKey $(SoftProductKey)
		CloseRegKey $(SoftNetRuleKey)
		CloseRegKey $(SoftServiceKey)
		CloseRegKey $(SoftParameterKey)
		CloseRegKey $(SoftLinkageKey)
		Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
			EndWait
			goto fatalregistry
		endif
	endif
	else
		set CommonStatus = STATUS_USERCANCEL
		goto successful
	endif

;*********** Add Hardware Component For Each Card **********************

	ForListDo $(List1)
		ifstr(i) $($) != ""
				Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
				ifint $($R4) != -1
					Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
				endif
				ifint $($ShellCode) != $(!SHELL_CODE_OK)
					goto ShellCodeError
				endif
				set RegistryErrorIndex = $($R0)
				Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
					EndWait
					CloseRegKey $($R1)
					CloseRegKey $($R2)
					CloseRegKey $($R3)
					goto fatalregistry
				endif
				Set HardNetCardKey      = $($R1)
				Set HardNetRuleKey      = $($R2)
				Set HardParameterKey    = $($R3)
				set AdapterNumber = $($R4)
				set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
								   {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
								   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
								   {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
								   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                   {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)},+
								   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
				Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
				ifint $($ShellCode) != $(!SHELL_CODE_OK)
					goto ShellCodeError
				endif
				set NewValueList = {{CardType,$(NoTitle),$(!REG_VT_DWORD),5},+
								   {BusType,$(NoTitle),$(!REG_VT_DWORD),2},+
								   {MediaType,$(NoTitle),$(!REG_VT_DWORD),3},+
								   {EisaCompressedId,$(NoTitle),$(!REG_VT_DWORD),$(DEC300_1BYTE)},+
								   {BusNumber,$(NoTitle),$(!REG_VT_DWORD),*($(List1),$(#))},+
								   {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),*($(List2),$(#))},+
								   {RcvBuffCnt,$(NoTitle),$(!REG_VT_DWORD),*($(List3),$(#))},+
								   {BurstSize,$(NoTitle),$(!REG_VT_DWORD),*($(List4),$(#))},+
								   {XmtBuffCnt,$(NoTitle),$(!REG_VT_DWORD),*($(List5),$(#))},+
								   {FullDuplexEnable,$(NoTitle),$(!REG_VT_DWORD),*($(List6),$(#))},+
								   {RequestedTTRT,$(NoTitle),$(!REG_VT_DWORD),*($(List7),$(#))}}
		  
		  
		  
		  Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
				ifint $($ShellCode) != $(!SHELL_CODE_OK)
					goto ShellCodeError
				endif
				set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
				set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
				set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
									{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
									{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
									{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
				Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
				ifint $($ShellCode) != $(!SHELL_CODE_OK)
					goto ShellCodeError
				endif
				CloseRegKey $(HardNetCardKey)
				CloseRegKey $(HardNetRuleKey)
				CloseRegKey $(HardParameterKey)
			endif
		EndForListDo
	goto writeparameters
writeparameters = +
	EndWait
	goto successful
bindingadapter =+
	set Error = "Binding: Sorry, not yet implemented."
	goto fatal
removeadapter = +
	Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
		Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
			$(ProductSoftwareName)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Debug-Output "ShellCode error"
			goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
			goto fatalregistry
		endif
	else
		Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
			$(ProductSoftwareName), $(!NTN_RegBase)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Debug-Output "ShellCode error"
			goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
			goto fatalregistry
		endif
	endif
	goto end
UpgradeSoftware = +
	ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
		OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
		Ifstr $(KeyProduct) != $(KeyNull)
			GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
			set Version = *($(VersionInfo), 4)
			Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error"
				goto ShellCodeError
			endif
			set !UG_Filename = $($R0)
			ifstr(i) $(!UG_Filename) != ""
				install "Install-Update"
				ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
					goto fatal
				endif
			endif
			SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
			SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
			ifint $(Version) != $(ProductVersion)
			endif
			CloseRegKey $(KeyProduct)

;
; Upgrade MediaType to correct value (3 instead of 4).


            OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Linkage" $(MAXIMUM_ALLOWED) LinkageKey
            ifstr(i) $(LinkageKey) != ""
                GetRegValue $(LinkageKey) Bind BindInfo
                ForListDo *($(BindInfo),4)
                    Split-String $($) "\" CardInfo
                    QueryListSize CardPos $(CardInfo)
                    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"*($(CardInfo),$(CardPos))"\Parameters" $(MAXIMUM_ALLOWED) ParamKey
                    ifstr $(ParamKey) != ""
                        SetRegValue $(ParamKey) {MediaType,$(NoTitle),$(!REG_VT_DWORD),3}
                        CloseRegKey $(ParamKey)
                    endif
                EndForListDo
                CloseRegKey $(LinkageKey)
            endif



		else
			goto fatalregistry
		endif
	else
		OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
			  $(MAXIMUM_ALLOWED) NetworkCardKey
		Ifstr(i) $(NetworkCardKey) != $(KeyNull)
			GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
			set ServiceName = *($(ServiceNameInfo), 4)
			OpenRegKey $(NetworkCardKey) "" "NetRules" +
				$(MAXIMUM_ALLOWED) NetRuleKey
			Ifstr(i) $(NetRuleKey) != $(KeyNull)
			else
				goto fatalregistry
			endif
			CloseRegKey $(NetRules)
			CloseRegKey $(NetworkCardKey)
		else
			goto fatalregistry
		endif
		OpenRegKey $(!REG_H_LOCAL) "" +
			  $(!NTN_ServiceBase)"\"$(ServiceName) +
			  $(MAXIMUM_ALLOWED) ServiceKey
		Ifstr(i) $(ServiceKey) != $(KeyNull)
			CloseRegKey $(ServiceKey)
		else
			goto fatalregistry
		endif
	endif

    ;
    ; Enumerate all netcards installed of this type and update them
    ;
    set iSearch = 1
nextnetcard = +
    Shell $(UtilityInf), FindNextNetworkCard, $(ProductHardwareName), $(iSearch)
    set KeyNetcard = $($R0)
    set iSearch = $($R1)
    Debug-Output "OemNadEp.Inf: FindNextNetworkCard "$(KeyNetcard)","$(iSearch)
    Ifstr $(KeyNetcard) != $(KeyNull)
        Debug-Output "OemNadEp.Inf: Setting OperationsSupport value"
        SetRegValue $(KeyNetcard) {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)}
        CloseRegKey $(KeyNetcard)

        goto nextnetcard
    Endif

	goto end
successful = +
	goto end
abandon = +
	ForListDo $(OEM_ABANDON_OPTIONS)
		Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
			$(ProductSoftwareName), $($)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Debug-Output "ShellCode error"
			goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
			goto fatalregistry
		endif
	EndForListDo
	Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
		Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
			$(ProductSoftwareName), FALSE
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Debug-Output "ShellCode error"
			goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
			goto fatalregistry
		endif
	endif
	goto end
warning = +
	Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	ifstr(i) $($R1) == "OK"
		goto $(to)
	else-ifstr(i) $($R1) == "CANCEL"
		goto $(from)
	else
		goto "end"
	endif
nonfatalinfo = +
	Set CommonStatus = STATUS_USERCANCEL
	Set Severity = STATUS
	goto nonfatalmsg
nonfatal = +
	Set Severity = NONFATAL
	goto nonfatalmsg
nonfatalmsg = +
	ifstr(i) $(Error) == ""
		Set Severity = NONFATAL
		Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif
		set Error = $($R0)
	endif
	Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	ifstr(i) $($R1) == "OK"
		goto $(from)
	else
		goto "end"
	endif
fatalregistry = +
	Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	set Error = $($R0)
	goto fatal
fatal = +
	ifstr(i) $(Error) == ""
		Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif
		set Error = $($R0)
	endif
	Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	goto setfailed
ShellCodeError = +
	set DlgType      = "MessageBox"
	set STF_MB_TITLE = $(ShellCodeErrorTitle)
	set STF_MB_TEXT  = $(ShellCodeErrorText)
	set STF_MB_TYPE  = 1
	set STF_MB_ICON  = 3
	set STF_MB_DEF   = 1
	ui start "Error Message"
	goto setfailed
setfailed = +
	set CommonStatus = STATUS_FAILED
	ifstr(i) $(OEM_ABANDON_ON) == TRUE
		set OEM_ABANDON_ON = FALSE
		goto abandon
	endif
	goto end
end = +
	goto term
term = +
	Return $(CommonStatus)
[Install-Option]
	set STF_VITAL = ""
	ifstr(i) $(AddCopy) == "YES"
		AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
	endif
	ifstr(i) $(DoCopy) == "YES"
	   set !STF_NCPA_FLUSH_COPYLIST = TRUE
	   CopyFilesInCopyList
	endif
	ifstr(i) $(DoConfig) == "YES"
	endif
	Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit