/*++ Copyright (c) 1996 Microsoft Corporation Module Name: winsmcrd.h Abstract: Smart Card class/port IOCTL codes. This file is required for all code user mode and kernel mode, using Smart Card IOCTL's, defines, data structures Revision History: --*/ #ifndef _NTDDSCRD_H2_ #define _NTDDSCRD_H2_ #if defined (_MSC_VER) && (_MSC_VER >= 1020) #pragma once #endif #ifdef __cplusplus extern "C" { #endif #ifdef _WINSCARD_H_ typedef DWORD ULONG; typedef WORD UWORD; typedef BYTE UCHAR; #else typedef ULONG DWORD; // typedef UWORD WORD; typedef UCHAR BYTE; #endif #ifndef DEVICE_TYPE_SMARTCARD #define FILE_DEVICE_SMARTCARD 0x00000031 #else #if 0x00000031 != FILE_DEVICE_SMARTCARD #error "Incorrect Smart Card Device Definition" #endif #endif // // Various constants // #define SCARD_ATR_LENGTH 33 // ISO 7816-3 spec. // /////////////////////////////////////////////////////////////////////////////// // // Protocol Flag definitions // #define SCARD_PROTOCOL_UNDEFINED 0x00000000 // There is no active protocol. #define SCARD_PROTOCOL_T0 0x00000001 // T=0 is the active protocol. #define SCARD_PROTOCOL_T1 0x00000002 // T=1 is the active protocol. #define SCARD_PROTOCOL_RAW 0x00010000 // Raw is the active protocol. // // This is the mask of ISO defined transmission protocols // #define SCARD_PROTOCOL_Tx (SCARD_PROTOCOL_T0 | SCARD_PROTOCOL_T1) // // Use the default transmission parameters / card clock freq. // #define SCARD_PROTOCOL_DEFAULT 0x80000000 // // Use optimal transmission parameters / card clock freq. // Since using the optimal parameters is the default case no bit is defined to be 1 // #define SCARD_PROTOCOL_OPTIMAL 0x00000000 // // Ioctl parameters 1 for IOCTL_SMARTCARD_POWER // #define SCARD_POWER_DOWN 0 // Power down the card. #define SCARD_COLD_RESET 1 // Cycle power and reset the card. #define SCARD_WARM_RESET 2 // Force a reset on the card. // /////////////////////////////////////////////////////////////////////////////// // // Reader Action IOCTLs // #define SCARD_CTL_CODE(code) CTL_CODE(FILE_DEVICE_SMARTCARD, \ (code), \ METHOD_BUFFERED, \ FILE_ANY_ACCESS) #define IOCTL_SMARTCARD_POWER SCARD_CTL_CODE( 1) #define IOCTL_SMARTCARD_GET_ATTRIBUTE SCARD_CTL_CODE( 2) #define IOCTL_SMARTCARD_SET_ATTRIBUTE SCARD_CTL_CODE( 3) #define IOCTL_SMARTCARD_CONFISCATE SCARD_CTL_CODE( 4) #define IOCTL_SMARTCARD_TRANSMIT SCARD_CTL_CODE( 5) #define IOCTL_SMARTCARD_EJECT SCARD_CTL_CODE( 6) #define IOCTL_SMARTCARD_SWALLOW SCARD_CTL_CODE( 7) // #define IOCTL_SMARTCARD_READ SCARD_CTL_CODE( 8) obsolete // #define IOCTL_SMARTCARD_WRITE SCARD_CTL_CODE( 9) obsolete #define IOCTL_SMARTCARD_IS_PRESENT SCARD_CTL_CODE(10) #define IOCTL_SMARTCARD_IS_ABSENT SCARD_CTL_CODE(11) #define IOCTL_SMARTCARD_SET_PROTOCOL SCARD_CTL_CODE(12) #define IOCTL_SMARTCARD_GET_STATE SCARD_CTL_CODE(14) #define IOCTL_SMARTCARD_GET_LAST_ERROR SCARD_CTL_CODE(15) #define IOCTL_SMARTCARD_GET_PERF_CNTR SCARD_CTL_CODE(16) // /////////////////////////////////////////////////////////////////////////////// // // Tags for requesting card and reader attributes // #define MAXIMUM_ATTR_STRING_LENGTH 32 // Nothing bigger than this from getAttr #define MAXIMUM_SMARTCARD_READERS 10 // Limit the readers on the system #define SCARD_ATTR_VALUE(Class, Tag) ((((ULONG)(Class)) << 16) | ((ULONG)(Tag))) #define SCARD_CLASS_VENDOR_INFO 1 // Vendor information definitions #define SCARD_CLASS_COMMUNICATIONS 2 // Communication definitions #define SCARD_CLASS_PROTOCOL 3 // Protocol definitions #define SCARD_CLASS_POWER_MGMT 4 // Power Management definitions #define SCARD_CLASS_SECURITY 5 // Security Assurance definitions #define SCARD_CLASS_MECHANICAL 6 // Mechanical characteristic definitions #define SCARD_CLASS_VENDOR_DEFINED 7 // Vendor specific definitions #define SCARD_CLASS_IFD_PROTOCOL 8 // Interface Device Protocol options #define SCARD_CLASS_ICC_STATE 9 // ICC State specific definitions #define SCARD_CLASS_PERF 0x7ffe // performace counters #define SCARD_CLASS_SYSTEM 0x7fff // System-specific definitions #define SCARD_ATTR_VENDOR_NAME SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0100) #define SCARD_ATTR_VENDOR_IFD_TYPE SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0101) #define SCARD_ATTR_VENDOR_IFD_VERSION SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0102) #define SCARD_ATTR_VENDOR_IFD_SERIAL_NO SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0103) #define SCARD_ATTR_CHANNEL_ID SCARD_ATTR_VALUE(SCARD_CLASS_COMMUNICATIONS, 0x0110) #define SCARD_ATTR_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0120) // #define SCARD_ATTR_ASYNC_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0120) #define SCARD_ATTR_DEFAULT_CLK SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0121) #define SCARD_ATTR_MAX_CLK SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0122) #define SCARD_ATTR_DEFAULT_DATA_RATE SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0123) #define SCARD_ATTR_MAX_DATA_RATE SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0124) #define SCARD_ATTR_MAX_IFSD SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0125) // #define SCARD_ATTR_SYNC_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0126) #define SCARD_ATTR_POWER_MGMT_SUPPORT SCARD_ATTR_VALUE(SCARD_CLASS_POWER_MGMT, 0x0131) #define SCARD_ATTR_USER_TO_CARD_AUTH_DEVICE SCARD_ATTR_VALUE(SCARD_CLASS_SECURITY, 0x0140) #define SCARD_ATTR_USER_AUTH_INPUT_DEVICE SCARD_ATTR_VALUE(SCARD_CLASS_SECURITY, 0x0142) #define SCARD_ATTR_CHARACTERISTICS SCARD_ATTR_VALUE(SCARD_CLASS_MECHANICAL, 0x0150) #define SCARD_ATTR_CURRENT_PROTOCOL_TYPE SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0201) #define SCARD_ATTR_CURRENT_CLK SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0202) #define SCARD_ATTR_CURRENT_F SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0203) #define SCARD_ATTR_CURRENT_D SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0204) #define SCARD_ATTR_CURRENT_N SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0205) #define SCARD_ATTR_CURRENT_W SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0206) #define SCARD_ATTR_CURRENT_IFSC SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0207) #define SCARD_ATTR_CURRENT_IFSD SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0208) #define SCARD_ATTR_CURRENT_BWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0209) #define SCARD_ATTR_CURRENT_CWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020a) #define SCARD_ATTR_CURRENT_EBC_ENCODING SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020b) #define SCARD_ATTR_EXTENDED_BWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020c) #define SCARD_ATTR_ICC_PRESENCE SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0300) #define SCARD_ATTR_ICC_INTERFACE_STATUS SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0301) #define SCARD_ATTR_CURRENT_IO_STATE SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0302) #define SCARD_ATTR_ATR_STRING SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0303) #define SCARD_ATTR_ICC_TYPE_PER_ATR SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0304) #define SCARD_ATTR_ESC_RESET SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA000) #define SCARD_ATTR_ESC_CANCEL SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA003) #define SCARD_ATTR_ESC_AUTHREQUEST SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA005) #define SCARD_ATTR_MAXINPUT SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA007) #define SCARD_ATTR_DEVICE_UNIT SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0001) #define SCARD_ATTR_DEVICE_IN_USE SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0002) #define SCARD_ATTR_DEVICE_FRIENDLY_NAME_A SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0003) #define SCARD_ATTR_DEVICE_SYSTEM_NAME_A SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0004) #define SCARD_ATTR_DEVICE_FRIENDLY_NAME_W SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0005) #define SCARD_ATTR_DEVICE_SYSTEM_NAME_W SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0006) #define SCARD_ATTR_SUPRESS_T1_IFS_REQUEST SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0007) #define SCARD_PERF_NUM_TRANSMISSIONS SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0001) #define SCARD_PERF_BYTES_TRANSMITTED SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0002) #define SCARD_PERF_TRANSMISSION_TIME SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0003) #ifdef UNICODE #define SCARD_ATTR_DEVICE_FRIENDLY_NAME SCARD_ATTR_DEVICE_FRIENDLY_NAME_W #define SCARD_ATTR_DEVICE_SYSTEM_NAME SCARD_ATTR_DEVICE_SYSTEM_NAME_W #else #define SCARD_ATTR_DEVICE_FRIENDLY_NAME SCARD_ATTR_DEVICE_FRIENDLY_NAME_A #define SCARD_ATTR_DEVICE_SYSTEM_NAME SCARD_ATTR_DEVICE_SYSTEM_NAME_A #endif // // T=0 Protocol Defines // #define SCARD_T0_HEADER_LENGTH 7 #define SCARD_T0_CMD_LENGTH 5 // // T=1 Protocol Defines // #define SCARD_T1_PROLOGUE_LENGTH 3 #define SCARD_T1_EPILOGUE_LENGTH 2 #define SCARD_T1_MAX_IFS 254 // /////////////////////////////////////////////////////////////////////////////// // // Reader states // #define SCARD_UNKNOWN 0 // This value implies the driver is unaware // of the current state of the reader. #define SCARD_ABSENT 1 // This value implies there is no card in // the reader. #define SCARD_PRESENT 2 // This value implies there is a card is // present in the reader, but that it has // not been moved into position for use. #define SCARD_SWALLOWED 3 // This value implies there is a card in the // reader in position for use. The card is // not powered. #define SCARD_POWERED 4 // This value implies there is power is // being provided to the card, but the // Reader Driver is unaware of the mode of // the card. #define SCARD_NEGOTIABLE 5 // This value implies the card has been // reset and is awaiting PTS negotiation. #define SCARD_SPECIFIC 6 // This value implies the card has been // reset and specific communication // protocols have been established. //////////////////////////////////////////////////////////////////////////////// // // I/O Services // // The following services provide access to the I/O capabilities of the // reader drivers. Services of the Smart Card are requested by placing the // following structure into the protocol buffer: // typedef struct _SCARD_IO_REQUEST{ DWORD dwProtocol; // Protocol identifier DWORD cbPciLength; // Protocol Control Information Length } SCARD_IO_REQUEST, *PSCARD_IO_REQUEST, *LPSCARD_IO_REQUEST; typedef const SCARD_IO_REQUEST *LPCSCARD_IO_REQUEST; // // T=0 protocol services. // typedef struct { BYTE bCla, // The instruction class bIns, // The instruction code within the instruction class bP1, bP2, // Parameters to the instruction bP3; // Size of I/O Transfer } SCARD_T0_COMMAND, *LPSCARD_T0_COMMAND; typedef struct { SCARD_IO_REQUEST ioRequest; BYTE bSw1, bSw2; // Return codes from the instruction union { SCARD_T0_COMMAND CmdBytes; BYTE rgbHeader[5]; }; } SCARD_T0_REQUEST; typedef SCARD_T0_REQUEST *PSCARD_T0_REQUEST, *LPSCARD_T0_REQUEST; // // T=1 Protocol Services // typedef struct { SCARD_IO_REQUEST ioRequest; } SCARD_T1_REQUEST; typedef SCARD_T1_REQUEST *PSCARD_T1_REQUEST, *LPSCARD_T1_REQUEST; // //////////////////////////////////////////////////////////////////////////////// // // Driver attribute flags // #define SCARD_READER_SWALLOWS 0x00000001 // Reader has a card swallowing // mechanism. #define SCARD_READER_EJECTS 0x00000002 // Reader has a card ejection // mechanism. #define SCARD_READER_CONFISCATES 0x00000004 // Reader has a card capture // mechanism. // /////////////////////////////////////////////////////////////////////////////// // // Type of reader // #define SCARD_READER_TYPE_SERIAL 0x01 #define SCARD_READER_TYPE_PARALELL 0x02 #define SCARD_READER_TYPE_KEYBOARD 0x04 #define SCARD_READER_TYPE_SCSI 0x08 #define SCARD_READER_TYPE_IDE 0x10 #define SCARD_READER_TYPE_USB 0x20 #define SCARD_READER_TYPE_PCMCIA 0x40 #define SCARD_READER_TYPE_VENDOR 0xF0 #ifdef __cplusplus } #endif #endif