/*++ BUILD Version: 0001 // Increment this if a change has global effects Copyright (c) 1991-1993 Microsoft Corporation Module Name: alertmsg.h Abstract: This file contains the number and text of alert messages. Author: Ported LAN Manager 2.0 [Environment:] User Mode - Win32 [Notes:] This file is included by lmalert.h Revision History: 22-July-1991 ritaw Converted to NT style. --*/ #ifndef _ALERTMSG_ #define _ALERTMSG_ // // ALERT_BASE is the base of alert log codes. // #define ALERT_BASE 3000 // Entries between 3000-3050 are full. So, we created ALERT2_BASE // for future expansion. // #define ALERT_Disk_Full (ALERT_BASE + 0) /* * Drive %1 is nearly full. %2 bytes are available. * Please warn users and delete unneeded files. */ #define ALERT_ErrorLog (ALERT_BASE + 1) /* * %1 errors were logged in the last %2 minutes. * Please review the server's error log. */ #define ALERT_NetIO (ALERT_BASE + 2) /* * %1 network errors occurred in the last %2 minutes. * Please review the server's error log. The server and/or * network hardware may need service. */ #define ALERT_Logon (ALERT_BASE + 3) /* * There were %1 bad password attempts in the last %2 minutes. * Please review the server's audit trail. */ #define ALERT_Access (ALERT_BASE + 4) /* * There were %1 access-denied errors in the last %2 minutes. * Please review the server's audit trail. */ #define ALERT_ErrorLogFull (ALERT_BASE + 6) /* * The error log is full. No errors will be logged until * the file is cleared or the limit is raised. */ #define ALERT_ErrorLogFull_W (ALERT_BASE + 7) /* * The error log is 80%% full. */ #define ALERT_AuditLogFull (ALERT_BASE + 8) /* * The audit log is full. No audit entries will be logged * until the file is cleared or the limit is raised. */ #define ALERT_AuditLogFull_W (ALERT_BASE + 9) /* * The audit log is 80%% full. */ #define ALERT_CloseBehindError (ALERT_BASE + 10) /* * An error occurred closing file %1. * Please check the file to make sure it is not corrupted. */ #define ALERT_AdminClose (ALERT_BASE + 11) /* * The administrator has closed %1. */ #define ALERT_AccessShareSec (ALERT_BASE + 12) /* * There were %1 access-denied errors in the last %2 minutes. */ #define ALERT_PowerOut (ALERT_BASE + 20) /* * A power failure was detected at %1. The server has been paused. */ #define ALERT_PowerBack (ALERT_BASE + 21) /* * Power has been restored at %1. The server is no longer paused. */ #define ALERT_PowerShutdown (ALERT_BASE + 22) /* * The UPS service is starting shut down at %1 due to low battery. */ #define ALERT_CmdFileConfig (ALERT_BASE + 23) /* * There is a problem with a configuration of user specified * shut down command file. The UPS service started anyway. */ #define ALERT_HotFix (ALERT_BASE + 25) /* * A defective sector on drive %1 has been replaced (hotfixed). * No data was lost. You should run CHKDSK soon to restore full * performance and replenish the volume's spare sector pool. * * The hotfix occurred while processing a remote request. */ #define ALERT_HardErr_Server (ALERT_BASE + 26) /* * A disk error occurred on the HPFS volume in drive %1. * The error occurred while processing a remote request. */ #define ALERT_LocalSecFail1 (ALERT_BASE + 27) /* * The user accounts database (NET.ACC) is corrupted. The local security * system is replacing the corrupted NET.ACC with the backup * made on %1 at %2. * Any updates made to the database after this time are lost. * */ #define ALERT_LocalSecFail2 (ALERT_BASE + 28) /* * The user accounts database (NET.ACC) is missing. The local * security system is restoring the backup database * made on %1 at %2. * Any updates made to the database after this time are lost. * */ #define ALERT_LocalSecFail3 (ALERT_BASE + 29) /* * Local security could not be started because the user accounts database * (NET.ACC) was missing or corrupted, and no usable backup * database was present. * * THE SYSTEM IS NOT SECURE. * */ #define ALERT_ReplCannotMasterDir (ALERT_BASE + 30) /* *The server cannot export directory %1, to client %2. * It is exported from another server. */ #define ALERT_ReplUpdateError (ALERT_BASE + 31) /* * The replication server could not update directory %2 from the source * on %3 due to error %1. */ #define ALERT_ReplLostMaster (ALERT_BASE + 32) /* * Master %1 did not send an update notice for directory %2 at the expected * time. */ #define ALERT_AcctLimitExceeded (ALERT_BASE + 33) /* * User %1 has exceeded account limitation %2 on server %3. */ #define ALERT_NetlogonFailedPrimary (ALERT_BASE + 34) /* * The primary domain controller for domain %1 failed. */ #define ALERT_NetlogonAuthDCFail (ALERT_BASE + 35) /* * Failed to authenticate with %2, a Windows NT or Windows 2000 Domain Controller for * domain %1. */ #define ALERT_ReplLogonFailed (ALERT_BASE + 36) /* * The replicator attempted to log on at %2 as %1 and failed. */ #define ALERT_Logon_Limit (ALERT_BASE + 37) /* @I *LOGON HOURS %0 */ #define ALERT_ReplAccessDenied (ALERT_BASE + 38) /* * Replicator could not access %2 * on %3 due to system error %1. */ #define ALERT_ReplMaxFiles (ALERT_BASE + 39) /* * Replicator limit for files in a directory has been exceeded. */ #define ALERT_ReplMaxTreeDepth (ALERT_BASE + 40) /* * Replicator limit for tree depth has been exceeded. */ #define ALERT_ReplUserCurDir (ALERT_BASE + 41) /* * The replicator cannot update directory %1. It has tree integrity * and is the current directory for some process. */ #define ALERT_ReplNetErr (ALERT_BASE + 42) /* * Network error %1 occurred. */ #define ALERT_ReplSysErr (ALERT_BASE + 45) /* * System error %1 occurred. */ #define ALERT_ReplUserLoged (ALERT_BASE + 46) /* * Cannot log on. User is currently logged on and argument TRYUSER * is set to NO. */ #define ALERT_ReplBadImport (ALERT_BASE + 47) /* * IMPORT path %1 cannot be found. */ #define ALERT_ReplBadExport (ALERT_BASE + 48) /* * EXPORT path %1 cannot be found. */ #define ALERT_ReplDataChanged (ALERT_BASE + 49) /* * Replicated data has changed in directory %1. */ #define ALERT_ReplSignalFileErr (ALERT_BASE + 50) /* * Replicator failed to update signal file in directory %2 due to * %1 system error. */ // // IMPORTANT - (ALERT_BASE + 50) is equal to SERVICE_BASE. // Do not add any errors beyond this point!!! // // #define ALERT2_BASE 5500 #define ALERT_UpdateLogWarn (ALERT2_BASE + 0) /* * The update log on %1 is over 80%% capacity. The primary * domain controller %2 is not retrieving the updates. */ #define ALERT_UpdateLogFull (ALERT2_BASE + 1) /* * The update log on %1 is full, and no further updates * can be added until the primary domain controller %2 * retrieves the updates. */ #define ALERT_NetlogonTimeDifference (ALERT2_BASE + 2) /* * The time difference with the primary domain controller %1 * exceeds the maximum allowed skew of %2 seconds. */ #define ALERT_AccountLockout (ALERT2_BASE + 3) /* * The account of user %1 has been locked out on %2 * due to %3 bad password attempts. */ #define ALERT_ELF_LogFileNotOpened (ALERT2_BASE + 4) /* * The %1 log file cannot be opened. */ #define ALERT_ELF_LogFileCorrupt (ALERT2_BASE + 5) /* * The %1 log file is corrupted and will be cleared. */ #define ALERT_ELF_DefaultLogCorrupt (ALERT2_BASE + 6) /* * The Application log file could not be opened. %1 will be used as the * default log file. */ #define ALERT_ELF_LogOverflow (ALERT2_BASE + 7) /* * The %1 Log is full. If this is the first time you have seen this * message take the following steps:%n * Start, Settings, Control Panel, Administrative Tools, Event Viewer%n * Select %1 Log, from the action menu choose Clear All Events, choose not * to save.%n%n * If this dialog persists, contact your helpdesk/system administrator. */ #define ALERT_NetlogonFullSync (ALERT2_BASE + 8) /* * The security database full synchronization has been initiated by the server %1. */ #define ALERT_SC_IsLastKnownGood (ALERT2_BASE + 9) /* * Windows 2000 could not be started as configured. * A previous working configuration was used instead. */ #define ALERT_UnhandledException (ALERT2_BASE + 10) /* * The exception 0x%1 occurred in the application %2 at location 0x%3. */ #define ALERT_NetLogonMismatchSIDInMsg (ALERT2_BASE + 11) /* * The servers %1 and %3 both claim to be an NT Domain Controller for * the %2 domain. One of the servers should be removed from the * domain because the servers have different security identifiers * (SID). */ #define ALERT_NetLogonDuplicatePDC (ALERT2_BASE + 12) /* * The server %1 and %2 both claim to be the primary domain * controller for the %3 domain. One of the servers should be * demoted or removed from the domain. */ #define ALERT_NetLogonUntrustedClient (ALERT2_BASE + 13) /* * The computer %1 tried to connect to the server %2 using * the trust relationship established by the %3 domain. However, the * computer lost the correct security identifier (SID) * when the domain was reconfigured. Reestablish the trust * relationship. */ #define ALERT_BugCheck (ALERT2_BASE + 14) /* * The computer has rebooted from a bugcheck. The bugcheck was: * %1. * %2 * A full dump was not saved. */ #define ALERT_BugCheckSaved (ALERT2_BASE + 15) /* * The computer has rebooted from a bugcheck. The bugcheck was: * %1. * %2 * A dump was saved in: %3. */ #define ALERT_NetLogonSidConflict (ALERT2_BASE + 16) /* * The computer or domain %1 trusts domain %2. (This may be an indirect * trust.) However, %1 and %2 have the same machine security identifier * (SID). NT should be re-installed on either %1 or %2. */ #define ALERT_NetLogonTrustNameBad (ALERT2_BASE + 17) /* * The computer or domain %1 trusts domain %2. (This may be an indirect * trust.) However, %2 is not a valid name for a trusted domain. * The name of the trusted domain should be changed to a valid name. */ #endif // ifdef _ALERTMSG_