;/*++ BUILD Version: 0e001 // Increment this if a change has global effects ; ;Copyright (c) 1991 Microsoft Corporation ; ;Module Name: ; ; cmdmsg.h ; ;Abstract: ; ; This file contains the message definitions for the Win32 CMD.EXE ; program. ; ;Author: ; ; Steve Wood (stevewo) 25-Jan-1991 ; ;Revision History: ; ;Notes: ; ; This file is generated by the MC tool from the winerror.msg file. ; ;--*/ ; ;#ifndef _CMDMSG_ ;#define _CMDMSG_ ; ; ;#define MSG_FIRST_CMD_MSG_ID MSG_NOYES_RESPONSE_DATA MessageId=9000 SymbolicName=MSG_NOYES_RESPONSE_DATA Language=English NY%0 . MessageId=9001 SymbolicName=MSG_BAD_PARM1 Language=English An incorrect parameter was entered for the command. . MessageId=9002 SymbolicName=MSG_BAD_SYNTAX Language=English The syntax of the command is incorrect. . MessageId=9003 SymbolicName=MSG_STRIKE_ANY_KEY Language=English Press any key to continue . . . %0 . MessageId=9004 SymbolicName=MSG_CMD_DELETE Language=English %1, Delete (Y/N)? %0 . MessageId=9006 SymbolicName=MSG_REN_INVAL_PATH_FILENAME Language=English The system cannot accept the path or file name requested. . MessageId=9007 SymbolicName=MSG_INVALID_DATE Language=English The system cannot accept the date entered. . MessageId=9008 SymbolicName=MSG_NO_BAT_LABEL Language=English No batch label specified to GOTO command. . MessageId=9009 SymbolicName=MSG_DIR_BAD_COMMAND_OR_FILE Language=English '%1' is not recognized as an internal or external command, operable program or batch file. . MessageId=9010 SymbolicName=MSG_REN_INVALID_TIME Language=English The system cannot accept the time entered. . MessageId=9012 SymbolicName=MSG_COPYRIGHT Language=English (C) Copyright 1985-2001 Microsoft Corp. . MessageId=9013 SymbolicName=MSG_C Language=English ^C . MessageId=9014 SymbolicName=MSG_FILES_COPIED Language=English %1 file(s) copied. . MessageId=9015 SymbolicName=MSG_CURRENT_DATE Language=English The current date is: %0 . MessageId=9016 SymbolicName=MSG_CURRENT_TIME Language=English The current time is: %0 . MessageId=9017 SymbolicName=MSG_DIR_OF Language=English Directory of %1 . MessageId=9018 SymbolicName=MSG_OUT_OF_ENVIRON_SPACE Language=English The system is out of environment space. . MessageId=9020 SymbolicName=MSG_EXEC_FAILURE Language=English The system cannot execute the specified program. . MessageId=9023 SymbolicName=MSG_LINES_TOO_LONG Language=English The input line is too long. . MessageId=9024 SymbolicName=MSG_CONT_LOST_BEF_COPY Language=English The contents of the target file were lost. . MessageId=9025 SymbolicName=MSG_INSRT_DISK_BAT Language=English Insert the diskette that contains the batch file and press any key when ready. %0 . MessageId=9026 SymbolicName=MSG_ENTER_NEW_DATE Language=English Enter the new date: (mm-dd-yy) %0 . MessageId=9027 SymbolicName=MSG_ENTER_NEW_TIME Language=English Enter the new time: %0 . MessageId=9028 SymbolicName=MSG_RDR_HNDL_CREATE Language=English The handle could not be duplicated during redirection of handle %1. . MessageId=9029 SymbolicName=MSG_ECHO_OFF Language=English ECHO is off. . MessageId=9030 SymbolicName=MSG_ECHO_ON Language=English ECHO is on. . MessageId=9031 SymbolicName=MSG_VERIFY_OFF Language=English VERIFY is off. . MessageId=9032 SymbolicName=MSG_VERIFY_ON Language=English VERIFY is on. . MessageId=9033 SymbolicName=MSG_CANNOT_COPIED_ONTO_SELF Language=English The file cannot be copied onto itself. . MessageId=9034 SymbolicName=MSG_SYNERR_GENL Language=English %1 was unexpected at this time. . MessageId=9036 SymbolicName=MSG_PID_IS Language=English The Process Identification Number is %1. . MessageId=9037 SymbolicName=MSG_DUP_FILENAME_OR_NOT_FD Language=English A duplicate file name exists, or the file cannot be found. . MessageId=9038 SymbolicName=MSG_ARE_YOU_SURE Language=English %1, Are you sure (Y/N)? %0 . MessageId=9039 SymbolicName=MSG_TOKEN_TOO_LONG Language=English The following character string is too long: %1 . MessageId=9040 SymbolicName=MSG_MS_DOS_VERSION Language=English Microsoft Windows XP [Version %1]%0 . MessageId=9041 SymbolicName=MSG_PIPE_FAILURE Language=English The handle could not be duplicated during a pipe operation. . MessageId=9042 SymbolicName=MSG_MS_MORE Language=English More? %0 . MessageId=9043 SymbolicName=MSG_REAL_MODE_ONLY Language=English The system cannot complete the process. . MessageId=9044 SymbolicName=MSG_TYPE_FILENAME Language=English %1 . MessageId=9051 SymbolicName=MSG_DR_VOL_SERIAL Language=English Volume Serial Number is %1 . MessageId=9052 SymbolicName=MSG_DIR_EXISTS Language=English A subdirectory or file %1 already exists. . MessageId=9053 SymbolicName=MSG_ERR_PROC_ARG Language=English Error occurred while processing: %1. . MessageId=9054 SymbolicName=MSG_HAS_NO_LABEL Language=English Volume in drive %1 has no label. . MessageId=9055 SymbolicName=MSG_DR_VOL_LABEL Language=English Volume in drive %1 is %2 . MessageId=9056 SymbolicName=MSG_KEYS_ON Language=English KEYS is on. . MessageId=9057 SymbolicName=MSG_KEYS_OFF Language=English KEYS is off. . MessageId=9058 SymbolicName=MSG_START_INVALID_PARAMETER Language=English The system cannot accept the START command parameter %1. . MessageId=9059 SymbolicName=MSG_CMD_FILE_NOT_FOUND Language=English The system cannot find the file %1. . MessageId=9060 SymbolicName=MSG_CMD_INVAL_PIPE Language=English The process tried to write to a nonexistent pipe. . MessageId=9067 SymbolicName=MSG_CMD_NOT_RECOGNIZED Language=English "%1" is not a recognized device. . MessageId=9068 SymbolicName=MSG_CMD_BATCH_FILE_MISSING Language=English The batch file cannot be found. . MessageId=9070 SymbolicName=MSG_FILES_MOVED Language=English %1 file(s) moved. . MessageId=9071 SymbolicName=MSG_TRAPC Language=English A program attempted to reference storage outside the limits of a stack segment. The program was ended. %1 . MessageId=9073 SymbolicName=MSG_LITERAL_TEXT Language=English %1%0 . MessageId=9074 SymbolicName=MSG_NOT_IMPLEMENTED Language=English Command not implemented. . MessageId=9075 SymbolicName=MSG_DIR Language=English %0 . MessageId=9076 SymbolicName=MSG_NO_MEMORY Language=English Out of memory. . MessageId=9077 SymbolicName=MSG_INVALID_SWITCH Language=English Invalid switch - "%1". . MessageId=9078 SymbolicName=MSG_PARAMETER_FORMAT_NOT_CORRECT Language=English Parameter format not correct - "%1". . MessageId=9079 SymbolicName=MSG_ERROR_IN_DIRCMD Language=English (Error occurred in environment variable) . MessageId=9080 SymbolicName=MSG_FILES_COUNT_FREE Language=English %1 File(s) %2 bytes . MessageId=9081 SymbolicName=MSG_FILES_TOTAL_FREE Language=English %1 Dir(s) %2 bytes free . MessageId=9082 SymbolicName=MSG_FILE_TOTAL Language=English Total Files Listed: . MessageId=9083 SymbolicName=MSG_BATCH_TERM Language=English Terminate batch job (Y/N)? %0 . MessageId=9084 SymbolicName=MSG_BAD_CURDIR Language=English The current directory is invalid. . MessageId=9085 SymbolicName=MSG_HELP_CHDIR Language=English Displays the name of or changes the current directory. CHDIR [/D] [drive:][path] CHDIR [..] CD [/D] [drive:][path] CD [..] .. Specifies that you want to change to the parent directory. Type CD drive: to display the current directory in the specified drive. Type CD without parameters to display the current drive and directory. Use the /D switch to change current drive in addition to changing current directory for a drive. . MessageId=9086 SymbolicName=MSG_HELP_CLS Language=English Clears the screen. CLS . MessageId=9087 SymbolicName=MSG_HELP_COPY Language=English Copies one or more files to another location. COPY [/D] [/V] [/N] [/Y | /-Y] [/Z] [/A | /B ] source [/A | /B] [+ source [/A | /B] [+ ...]] [destination [/A | /B]] source Specifies the file or files to be copied. /A Indicates an ASCII text file. /B Indicates a binary file. /D Allow the destination file to be created decrypted destination Specifies the directory and/or filename for the new file(s). /V Verifies that new files are written correctly. /N Uses short filename, if available, when copying a file with a non-8dot3 name. /Y Suppresses prompting to confirm you want to overwrite an existing destination file. /-Y Causes prompting to confirm you want to overwrite an existing destination file. /Z Copies networked files in restartable mode. The switch /Y may be preset in the COPYCMD environment variable. This may be overridden with /-Y on the command line. Default is to prompt on overwrites unless COPY command is being executed from within a batch script. To append files, specify a single file for destination, but multiple files for source (using wildcards or file1+file2+file3 format). . MessageId=9088 SymbolicName=MSG_HELP_DATE Language=English Displays or sets the date. DATE [/T | date] Type DATE without parameters to display the current date setting and a prompt for a new one. Press ENTER to keep the same date. . MessageId=9089 SymbolicName=MSG_HELP_DEL_ERASE Language=English Deletes one or more files. DEL [/P] [/F] [/S] [/Q] [/A[[:]attributes]] names ERASE [/P] [/F] [/S] [/Q] [/A[[:]attributes]] names names Specifies a list of one or more files or directories. Wildcards may be used to delete multiple files. If a directory is specified, all files within the directory will be deleted. /P Prompts for confirmation before deleting each file. /F Force deleting of read-only files. /S Delete specified files from all subdirectories. /Q Quiet mode, do not ask if ok to delete on global wildcard /A Selects files to delete based on attributes attributes R Read-only files S System files H Hidden files A Files ready for archiving - Prefix meaning not . MessageId=9090 SymbolicName=MSG_HELP_DIR Language=English Displays a list of files and subdirectories in a directory. DIR [drive:][path][filename] [/A[[:]attributes]] [/B] [/C] [/D] [/L] [/N] [/O[[:]sortorder]] [/P] [/Q] [/S] [/T[[:]timefield]] [/W] [/X] [/4] [drive:][path][filename] Specifies drive, directory, and/or files to list. /A Displays files with specified attributes. attributes D Directories R Read-only files H Hidden files A Files ready for archiving S System files - Prefix meaning not /B Uses bare format (no heading information or summary). /C Display the thousand separator in file sizes. This is the default. Use /-C to disable display of separator. /D Same as wide but files are list sorted by column. /L Uses lowercase. /N New long list format where filenames are on the far right. /O List by files in sorted order. sortorder N By name (alphabetic) S By size (smallest first) E By extension (alphabetic) D By date/time (oldest first) G Group directories first - Prefix to reverse order /P Pauses after each screenful of information. /Q Display the owner of the file. /S Displays files in specified directory and all subdirectories. /T Controls which time field displayed or used for sorting timefield C Creation A Last Access W Last Written /W Uses wide list format. /X This displays the short names generated for non-8dot3 file names. The format is that of /N with the short name inserted before the long name. If no short name is present, blanks are displayed in its place. /4 Displays four-digit years Switches may be preset in the DIRCMD environment variable. Override preset switches by prefixing any switch with - (hyphen)--for example, /-W. . MessageId=9091 SymbolicName=MSG_HELP_EXIT Language=English Quits the CMD.EXE program (command interpreter) or the current batch script. EXIT [/B] [exitCode] /B specifies to exit the current batch script instead of CMD.EXE. If executed from outside a batch script, it will quit CMD.EXE exitCode specifies a numeric number. if /B is specified, sets ERRORLEVEL that number. If quitting CMD.EXE, sets the process exit code with that number. . MessageId=9092 SymbolicName=MSG_HELP_MKDIR Language=English Creates a directory. MKDIR [drive:]path MD [drive:]path . MessageId=9093 SymbolicName=MSG_HELP_PATH Language=English Displays or sets a search path for executable files. PATH [[drive:]path[;...][;%%PATH%%] PATH ; Type PATH ; to clear all search-path settings and direct cmd.exe to search only in the current directory. Type PATH without parameters to display the current path. Including %%PATH%% in the new path setting causes the old path to be appended to the new setting. . MessageId=9094 SymbolicName=MSG_HELP_PROMPT Language=English Changes the cmd.exe command prompt. PROMPT [text] text Specifies a new command prompt. Prompt can be made up of normal characters and the following special codes: $A & (Ampersand) $B | (pipe) $C ( (Left parenthesis) $D Current date $E Escape code (ASCII code 27) $F ) (Right parenthesis) $G > (greater-than sign) $H Backspace (erases previous character) $L < (less-than sign) $N Current drive $P Current drive and path $Q = (equal sign) $S (space) $T Current time $V Windows XP version number $_ Carriage return and linefeed $$ $ (dollar sign) . MessageId=9095 SymbolicName=MSG_HELP_RMDIR Language=English Removes (deletes) a directory. RMDIR [/S] [/Q] [drive:]path RD [/S] [/Q] [drive:]path /S Removes all directories and files in the specified directory in addition to the directory itself. Used to remove a directory tree. /Q Quiet mode, do not ask if ok to remove a directory tree with /S . MessageId=9096 SymbolicName=MSG_HELP_RENAME Language=English Renames a file or files. RENAME [drive:][path]filename1 filename2. REN [drive:][path]filename1 filename2. Note that you cannot specify a new drive or path for your destination file. . MessageId=9097 SymbolicName=MSG_HELP_SET Language=English Displays, sets, or removes cmd.exe environment variables. SET [variable=[string]] variable Specifies the environment-variable name. string Specifies a series of characters to assign to the variable. Type SET without parameters to display the current environment variables. . MessageId=9098 SymbolicName=MSG_HELP_TIME Language=English Displays or sets the system time. TIME [/T | time] Type TIME with no parameters to display the current time setting and a prompt for a new one. Press ENTER to keep the same time. . MessageId=9099 SymbolicName=MSG_HELP_TYPE Language=English Displays the contents of a text file or files. TYPE [drive:][path]filename . MessageId=9100 SymbolicName=MSG_HELP_VER Language=English Displays the Windows XP version. VER . MessageId=9101 SymbolicName=MSG_HELP_VERIFY Language=English Tells cmd.exe whether to verify that your files are written correctly to a disk. VERIFY [ON | OFF] Type VERIFY without a parameter to display the current VERIFY setting. . MessageId=9102 SymbolicName=MSG_HELP_VOL Language=English Displays the disk volume label and serial number, if they exist. VOL [drive:] . MessageId=9103 SymbolicName=MSG_HELP_CALL Language=English Calls one batch program from another. CALL [drive:][path]filename [batch-parameters] batch-parameters Specifies any command-line information required by the batch program. . MessageId=9104 SymbolicName=MSG_HELP_REM Language=English Records comments (remarks) in a batch file or CONFIG.SYS. REM [comment] . MessageId=9105 SymbolicName=MSG_HELP_PAUSE Language=English Suspends processing of a batch program and displays the message Press any key to continue . . . %0 PAUSE . MessageId=9106 SymbolicName=MSG_HELP_ECHO Language=English Displays messages, or turns command-echoing on or off. ECHO [ON | OFF] ECHO [message] Type ECHO without parameters to display the current echo setting. . MessageId=9107 SymbolicName=MSG_HELP_GOTO Language=English Directs cmd.exe to a labeled line in a batch program. GOTO label label Specifies a text string used in the batch program as a label. You type a label on a line by itself, beginning with a colon. . MessageId=9108 SymbolicName=MSG_HELP_SHIFT Language=English Changes the position of replaceable parameters in a batch file. SHIFT [/n] . MessageId=9109 SymbolicName=MSG_HELP_IF Language=English Performs conditional processing in batch programs. IF [NOT] ERRORLEVEL number command IF [NOT] string1==string2 command IF [NOT] EXIST filename command NOT Specifies that Windows XP should carry out the command only if the condition is false. ERRORLEVEL number Specifies a true condition if the last program run returned an exit code equal to or greater than the number specified. string1==string2 Specifies a true condition if the specified text strings match. EXIST filename Specifies a true condition if the specified filename exists. command Specifies the command to carry out if the condition is met. Command can be followed by ELSE command which will execute the command after the ELSE keyword if the specified condition is FALSE The ELSE clause must occur on the same line as the command after the IF. For example: IF EXIST filename. ( del filename. ) ELSE ( echo filename. missing. ) The following would NOT work because the del command needs to be terminated by a newline: IF EXIST filename. del filename. ELSE echo filename. missing Nor would the following work, since the ELSE command must be on the same line as the end of the IF command: IF EXIST filename. del filename. ELSE echo filename. missing The following would work if you want it all on one line: IF EXIST filename. (del filename.) ELSE echo filename. missing . MessageId=9110 SymbolicName=MSG_HELP_FOR Language=English Runs a specified command for each file in a set of files. FOR %%variable IN (set) DO command [command-parameters] %%variable Specifies a single letter replaceable parameter. (set) Specifies a set of one or more files. Wildcards may be used. command Specifies the command to carry out for each file. command-parameters Specifies parameters or switches for the specified command. To use the FOR command in a batch program, specify %%%%variable instead of %%variable. Variable names are case sensitive, so %%i is different from %%I. . MessageId=9111 SymbolicName=MSG_HELP_START Language=English Starts a separate window to run a specified program or command. START ["title"] [/Dpath] [/I] [/MIN] [/MAX] [/SEPARATE | /SHARED] [/LOW | /NORMAL | /HIGH | /REALTIME | /ABOVENORMAL | /BELOWNORMAL] [/WAIT] [/B] [command/program] [parameters] "title" Title to display in window title bar. path Starting directory B Start application without creating a new window. The application has ^C handling ignored. Unless the application enables ^C processing, ^Break is the only way to interrupt the application I The new environment will be the original environment passed to the cmd.exe and not the current environment. MIN Start window minimized MAX Start window maximized SEPARATE Start 16-bit Windows program in separate memory space SHARED Start 16-bit Windows program in shared memory space LOW Start application in the IDLE priority class NORMAL Start application in the NORMAL priority class HIGH Start application in the HIGH priority class REALTIME Start application in the REALTIME priority class ABOVENORMAL Start application in the ABOVENORMAL priority class BELOWNORMAL Start application in the BELOWNORMAL priority class WAIT Start application and wait for it to terminate command/program If it is an internal cmd command or a batch file then the command processor is run with the /K switch to cmd.exe. This means that the window will remain after the command has been run. If it is not an internal cmd command or batch file then it is a program and will run as either a windowed application or a console application. parameters These are the parameters passed to the command/program . MessageId=9112 SymbolicName=MSG_HELP_BREAK Language=English Sets or Clears Extended CTRL+C checking on DOS system This is present for Compatibility with DOS systems. It has no effect under Windows XP. . MessageId=9113 SymbolicName=MSG_HELP_CMD Language=English Starts a new instance of the Windows XP command interpreter CMD [/A | /U] [/Q] [/D] [/E:ON | /E:OFF] [/F:ON | /F:OFF] [/V:ON | /V:OFF] [[/S] [/C | /K] string] /C Carries out the command specified by string and then terminates /K Carries out the command specified by string but remains /S Modifies the treatment of string after /C or /K (see below) /Q Turns echo off /D Disable execution of AutoRun commands from registry (see below) /A Causes the output of internal commands to a pipe or file to be ANSI /U Causes the output of internal commands to a pipe or file to be Unicode /T:fg Sets the foreground/background colors (see COLOR /? for more info) /E:ON Enable command extensions (see below) /E:OFF Disable command extensions (see below) /F:ON Enable file and directory name completion characters (see below) /F:OFF Disable file and directory name completion characters (see below) /V:ON Enable delayed environment variable expansion using ! as the delimiter. For example, /V:ON would allow !var! to expand the variable var at execution time. The %var% syntax expands variables at input time, which is quite a different thing when inside of a FOR loop. /V:OFF Disable delayed environment expansion. Note that multiple commands separated by the command separator '&&' are accepted for string if surrounded by quotes. Also, for compatibility reasons, /X is the same as /E:ON, /Y is the same as /E:OFF and /R is the same as /C. Any other switches are ignored. If /C or /K is specified, then the remainder of the command line after the switch is processed as a command line, where the following logic is used to process quote (") characters: 1. If all of the following conditions are met, then quote characters on the command line are preserved: - no /S switch - exactly two quote characters - no special characters between the two quote characters, where special is one of: &<>()@^| - there are one or more whitespace characters between the the two quote characters - the string between the two quote characters is the name of an executable file. 2. Otherwise, old behavior is to see if the first character is a quote character and if so, strip the leading character and remove the last quote character on the command line, preserving any text after the last quote character. . MessageId= SymbolicName=MSG_HELP_CMD1 Language=English If /D was NOT specified on the command line, then when CMD.EXE starts, it looks for the following REG_SZ/REG_EXPAND_SZ registry variables, and if either or both are present, they are executed first. HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\AutoRun and/or HKEY_CURRENT_USER\Software\Microsoft\Command Processor\AutoRun . MessageId= SymbolicName=MSG_HELP_CMD_EXTENSIONS Language=English Command Extensions are enabled by default. You may also disable extensions for a particular invocation by using the /E:OFF switch. You can enable or disable extensions for all invocations of CMD.EXE on a machine and/or user logon session by setting either or both of the following REG_DWORD values in the registry using REGEDT32.EXE: HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\EnableExtensions and/or HKEY_CURRENT_USER\Software\Microsoft\Command Processor\EnableExtensions to either 0x1 or 0x0. The user specific setting takes precedence over the machine setting. The command line switches take precedence over the registry settings. The command extensions involve changes and/or additions to the following commands: DEL or ERASE COLOR CD or CHDIR MD or MKDIR PROMPT PUSHD POPD SET SETLOCAL ENDLOCAL IF FOR CALL SHIFT GOTO START (also includes changes to external command invocation) ASSOC FTYPE To get specific details, type commandname /? to view the specifics. . MessageId= SymbolicName=MSG_HELP_CMD_EXTENSIONS1 Language=English Delayed environment variable expansion is NOT enabled by default. You can enable or disable delayed environment variable expansion for a particular invocation of CMD.EXE with the /V:ON or /V:OFF switch. You can enable or disable completion for all invocations of CMD.EXE on a machine and/or user logon session by setting either or both of the following REG_DWORD values in the registry using REGEDT32.EXE: HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\DelayedExpansion and/or HKEY_CURRENT_USER\Software\Microsoft\Command Processor\DelayedExpansion to either 0x1 or 0x0. The user specific setting takes precedence over the machine setting. The command line switches take precedence over the registry settings. If delayed environment variable expansion is enabled, then the exclamation character can be used to substitute the value of an environment variable at execution time. . MessageId= SymbolicName=MSG_HELP_CMD_COMPLETION1 Language=English File and Directory name completion is NOT enabled by default. You can enable or disable file name completion for a particular invocation of CMD.EXE with the /F:ON or /F:OFF switch. You can enable or disable completion for all invocations of CMD.EXE on a machine and/or user logon session by setting either or both of the following REG_DWORD values in the registry using REGEDT32.EXE: HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\CompletionChar HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\PathCompletionChar and/or HKEY_CURRENT_USER\Software\Microsoft\Command Processor\CompletionChar HKEY_CURRENT_USER\Software\Microsoft\Command Processor\PathCompletionChar with the hex value of a control character to use for a particular function (e.g. 0x4 is Ctrl-D and 0x6 is Ctrl-F). The user specific settings take precedence over the machine settings. The command line switches take precedence over the registry settings. If completion is enabled with the /F:ON switch, the two control characters used are Ctrl-D for directory name completion and Ctrl-F for file name completion. To disable a particular completion character in the registry, use the value for space (0x20) as it is not a valid control character. . MessageId= SymbolicName=MSG_HELP_CMD_COMPLETION2 Language=English Completion is invoked when you type either of the two control characters. The completion function takes the path string to the left of the cursor appends a wild card character to it if none is already present and builds up a list of paths that match. It then displays the first matching path. If no paths match, it just beeps and leaves the display alone. Thereafter, repeated pressing of the same control character will cycle through the list of matching paths. Pressing the Shift key with the control character will move through the list backwards. If you edit the line in any way and press the control character again, the saved list of matching paths is discarded and a new one generated. The same occurs if you switch between file and directory name completion. The only difference between the two control characters is the file completion character matches both file and directory names, while the directory completion character only matches directory names. If file completion is used on any of the built in directory commands (CD, MD or RD) then directory completion is assumed. The completion code deals correctly with file names that contain spaces or other special characters by placing quotes around the matching path. Also, if you back up, then invoke completion from within a line, the text to the right of the cursor at the point completion was invoked is discarded. The special characters that require quotes are: &()[]{}^=;!%'+,`~ . MessageId= SymbolicName=MSG_EXT_ENABLED Language=English Command Processor Extensions Enabled . MessageId= SymbolicName=MSG_EXT_ENABLED_BY_DEFAULT Language=English Command Processor Extensions enabled by default. Use CMD /? for details. . MessageId= SymbolicName=MSG_FILE_DELETED Language=English Deleted file - %1 . MessageId= SymbolicName=MSG_HELP_ASSOC Language=English Displays or modifies file extension associations ASSOC [.ext[=[fileType]]] .ext Specifies the file extension to associate the file type with fileType Specifies the file type to associate with the file extension Type ASSOC without parameters to display the current file associations. If ASSOC is invoked with just a file extension, it displays the current file association for that file extension. Specify nothing for the file type and the command will delete the association for the file extension. . MessageID= SymbolicName=MSG_ASSOC_NOT_FOUND Language=English File association not found for extension %1 . MessageId= SymbolicName=MSG_HELP_FTYPE Language=English Displays or modifies file types used in file extension associations FTYPE [fileType[=[openCommandString]]] fileType Specifies the file type to examine or change openCommandString Specifies the open command to use when launching files of this type. Type FTYPE without parameters to display the current file types that have open command strings defined. FTYPE is invoked with just a file type, it displays the current open command string for that file type. Specify nothing for the open command string and the FTYPE command will delete the open command string for the file type. Within an open command string %%0 or %%1 are substituted with the file name being launched through the assocation. %%* gets all the parameters and %%2 gets the 1st parameter, %%3 the second, etc. %%~n gets all the remaining parameters starting with the nth parameter, where n may be between 2 and 9, inclusive. For example: ASSOC .pl=PerlScript FTYPE PerlScript=perl.exe %%1 %%* would allow you to invoke a Perl script as follows: script.pl 1 2 3 If you want to eliminate the need to type the extensions, then do the following: set PATHEXT=.pl;%%PATHEXT%% and the script could be invoked as follows: script 1 2 3 . MessageID= SymbolicName=MSG_FTYPE_NOT_FOUND Language=English File type '%1' not found or no open command associated with it. . MessageID= SymbolicName=MSG_SETLOCAL_BAD_ARG Language=English Invalid parameter to SETLOCAL command . MessageID= SymbolicName=MSG_NO_COPYFILEEX Language=English The restartable option to the COPY command is not supported by this version of the operating system. . MessageID= SymbolicName=MSG_PATH_OPERATOR_INVALID Language=English The following usage of the path operator in batch-parameter substitution is invalid: %1 For valid formats type CALL /? or FOR /? . MessageID= SymbolicName=MSG_ENV_VAR_NOT_FOUND Language=English Environment variable %1 not defined . MessageID= SymbolicName=MSG_CALL_LABEL_INVALID Language=English Invalid attempt to call batch label outside of batch script. . MessageId= SymbolicName=MSG_MISSING_BAT_LABEL Language=English The system cannot find the batch label specified - %1 . MessageId= SymbolicName=MSG_UNICODE_NOT_SUPPORTED Language=English The unicode output option to CMD.EXE is not supported by this version of the operating system. . MessageId= SymbolicName=MSG_HELP_DEL_ERASE_X Language=English If Command Extensions are enabled DEL and ERASE change as follows: The display semantics of the /S switch are reversed in that it shows you only the files that are deleted, not the ones it could not find. . MessageId= SymbolicName=MSG_HELP_CHDIR_X Language=English If Command Extensions are enabled CHDIR changes as follows: The current directory string is converted to use the same case as the on disk names. So CD C:\TEMP would actually set the current directory to C:\Temp if that is the case on disk. CHDIR command does not treat spaces as delimiters, so it is possible to CD into a subdirectory name that contains a space without surrounding the name with quotes. For example: cd \winnt\profiles\username\programs\start menu is the same as: cd "\winnt\profiles\username\programs\start menu" which is what you would have to type if extensions were disabled. . MessageId= SymbolicName=MSG_HELP_MKDIR_X Language=English If Command Extensions are enabled MKDIR changes as follows: MKDIR creates any intermediate directories in the path, if needed. For example, assume \a does not exist then: mkdir \a\b\c\d is the same as: mkdir \a chdir \a mkdir b chdir b mkdir c chdir c mkdir d which is what you would have to type if extensions were disabled. . MessageId= SymbolicName=MSG_HELP_DATE_X Language=English If Command Extensions are enabled the DATE command supports the /T switch which tells the command to just output the current date, without prompting for a new date. . MessageId= SymbolicName=MSG_HELP_TIME_X Language=English If Command Extensions are enabled the TIME command supports the /T switch which tells the command to just output the current time, without prompting for a new time. . MessageId= SymbolicName=MSG_HELP_PROMPT_X Language=English If Command Extensions are enabled the PROMPT command supports the following additional formatting characters: $+ zero or more plus sign (+) characters depending upon the depth of the PUSHD directory stack, one character for each level pushed. $M Displays the remote name associated with the current drive letter or the empty string if current drive is not a network drive. . MessageId= SymbolicName=MSG_HELP_PUSHDIR_X Language=English If Command Extensions are enabled the PUSHD command accepts network paths in addition to the normal drive letter and path. If a network path is specified, PUSHD will create a temporary drive letter that points to that specified network resource and then change the current drive and directory, using the newly defined drive letter. Temporary drive letters are allocated from Z: on down, using the first unused drive letter found. . MessageId= SymbolicName=MSG_HELP_POPDIR_X Language=English If Command Extensions are enabled the POPD command will delete any temporary drive letter created by PUSHD when you POPD that drive off the pushed directory stack. . MessageId= SymbolicName=MSG_HELP_SET_X Language=English If Command Extensions are enabled SET changes as follows: SET command invoked with just a variable name, no equal sign or value will display the value of all variables whose prefix matches the name given to the SET command. For example: SET P would display all variables that begin with the letter 'P' SET command will set the ERRORLEVEL to 1 if the variable name is not found in the current environment. SET command will not allow an equal sign to be part of the name of a variable. Two new switches have been added to the SET command: SET /A expression SET /P variable=[promptString] The /A switch specifies that the string to the right of the equal sign is a numerical expression that is evaluated. The expression evaluator is pretty simple and supports the following operations, in decreasing order of precedence: () - grouping ! ~ - - unary operators * / %% - arithmetic operators + - - arithmetic operators << >> - logical shift & - bitwise and ^ - bitwise exclusive or | - bitwise or = *= /= %%= += -= - assignment &= ^= |= <<= >>= , - expression separator If you use any of the logical or modulus operators, you will need to enclose the expression string in quotes. Any non-numeric strings in the expression are treated as environment variable names whose values are converted to numbers before using them. If an environment variable name is specified but is not defined in the current environment, then a value of zero is used. This allows you to do arithmetic with environment variable values without having to type all those %% signs to get their values. If SET /A is executed from the command line outside of a command script, then it displays the final value of the expression. The assignment operator requires an environment variable name to the left of the assignment operator. Numeric values are decimal numbers, unless prefixed by 0x for hexadecimal numbers, and 0 for octal numbers. So 0x12 is the same as 18 is the same as 022. Please note that the octal notation can be confusing: 08 and 09 are not valid numbers because 8 and 9 are not valid octal digits. . MessageId= Language=English The /P switch allows you to set the value of a variable to a line of input entered by the user. Displays the specified promptString before reading the line of input. The promptString can be empty. Environment variable substitution has been enhanced as follows: %%PATH:str1=str2%% would expand the PATH environment variable, substituting each occurrence of "str1" in the expanded result with "str2". "str2" can be the empty string to effectively delete all occurrences of "str1" from the expanded output. "str1" can begin with an asterisk, in which case it will match everything from the beginning of the expanded output to the first occurrence of the remaining portion of str1. May also specify substrings for an expansion. %%PATH:~10,5%% would expand the PATH environment variable, and then use only the 5 characters that begin at the 11th (offset 10) character of the expanded result. If the length is not specified, then it defaults to the remainder of the variable value. If either number (offset or length) is negative, then the number used is the length of the environment variable value added to the offset or length specified. %%PATH:~-10%% would extract the last 10 characters of the PATH variable. %%PATH:~0,-2%% would extract all but the last 2 characters of the PATH variable. . MessageId= Language=English Finally, support for delayed environment variable expansion has been added. This support is always disabled by default, but may be enabled/disabled via the /V command line switch to CMD.EXE. See CMD /? Delayed environment variable expansion is useful for getting around the limitations of the current expansion which happens when a line of text is read, not when it is executed. The following example demonstrates the problem with immediate variable expansion: set VAR=before if "%%VAR%%" == "before" ( set VAR=after if "%%VAR%%" == "after" @echo If you see this, it worked ) would never display the message, since the %%VAR%% in BOTH IF statements is substituted when the first IF statement is read, since it logically includes the body of the IF, which is a compound statement. So the IF inside the compound statement is really comparing "before" with "after" which will never be equal. Similarly, the following example will not work as expected: set LIST= for %%i in (*) do set LIST=%%LIST%% %%i echo %%LIST%% in that it will NOT build up a list of files in the current directory, but instead will just set the LIST variable to the last file found. Again, this is because the %%LIST%% is expanded just once when the FOR statement is read, and at that time the LIST variable is empty. So the actual FOR loop we are executing is: for %%i in (*) do set LIST= %%i which just keeps setting LIST to the last file found. Delayed environment variable expansion allows you to use a different character (the exclamation mark) to expand environment variables at execution time. If delayed variable expansion is enabled, the above examples could be written as follows to work as intended: set VAR=before if "%%VAR%%" == "before" ( set VAR=after if "!VAR!" == "after" @echo If you see this, it worked ) set LIST= for %%i in (*) do set LIST=!LIST! %%i echo %%LIST%% . MessageId= Language=English If Command Extensions are enabled, then there are several dynamic environment variables that can be expanded but which don't show up in the list of variables displayed by SET. These variable values are computed dynamically each time the value of the variable is expanded. If the user explicitly defines a variable with one of these names, then that definition will override the dynamic one described below: %%CD%% - expands to the current directory string. %%DATE%% - expands to current date using same format as DATE command. %%TIME%% - expands to current time using same format as TIME command. %%RANDOM%% - expands to a random decimal number between 0 and 32767. %%ERRORLEVEL%% - expands to the current ERRORLEVEL value %%CMDEXTVERSION%% - expands to the current Command Processor Extensions version number. %%CMDCMDLINE%% - expands to the original command line that invoked the Command Processor. . MessageId= SymbolicName=MSG_HELP_GOTO_X Language=English If Command Extensions are enabled GOTO changes as follows: GOTO command now accepts a target label of :EOF which transfers control to the end of the current batch script file. This is an easy way to exit a batch script file without defining a label. Type CALL /? for a description of extensions to the CALL command that make this feature useful. . MessageId= SymbolicName=MSG_HELP_SHIFT_X Language=English If Command Extensions are enabled the SHIFT command supports the /n switch which tells the command to start shifting at the nth argument, where n may be between zero and eight. For example: SHIFT /2 would shift %%3 to %%2, %%4 to %%3, etc. and leave %%0 and %%1 unaffected. . MessageId= SymbolicName=MSG_HELP_CALL_X Language=English If Command Extensions are enabled CALL changes as follows: CALL command now accepts labels as the target of the CALL. The syntax is: CALL :label arguments A new batch file context is created with the specified arguments and control is passed to the statement after the label specified. You must "exit" twice by reaching the end of the batch script file twice. The first time you read the end, control will return to just after the CALL statement. The second time will exit the batch script. Type GOTO /? for a description of the GOTO :EOF extension that will allow you to "return" from a batch script. In addition, expansion of batch script argument references (%%0, %%1, etc.) have been changed as follows: %%* in a batch script refers to all the arguments (e.g. %%1 %%2 %%3 %%4 %%5 ...) Substitution of batch parameters (%%n) has been enhanced. You can now use the following optional syntax: %%~1 - expands %%1 removing any surrounding quotes (") %%~f1 - expands %%1 to a fully qualified path name %%~d1 - expands %%1 to a drive letter only %%~p1 - expands %%1 to a path only %%~n1 - expands %%1 to a file name only %%~x1 - expands %%1 to a file extension only %%~s1 - expanded path contains short names only %%~a1 - expands %%1 to file attributes %%~t1 - expands %%1 to date/time of file %%~z1 - expands %%1 to size of file %%~$PATH:1 - searches the directories listed in the PATH environment variable and expands %%1 to the fully qualified name of the first one found. If the environment variable name is not defined or the file is not found by the search, then this modifier expands to the empty string . MessageId= Language=English The modifiers can be combined to get compound results: %%~dp1 - expands %%1 to a drive letter and path only %%~nx1 - expands %%1 to a file name and extension only %%~dp$PATH:1 - searches the directories listed in the PATH environment variable for %%1 and expands to the drive letter and path of the first one found. %%~ftza1 - expands %%1 to a DIR like output line In the above examples %%1 and PATH can be replaced by other valid values. The %%~ syntax is terminated by a valid argument number. The %%~ modifiers may not be used with %%* . MessageId= SymbolicName=MSG_HELP_SETLOCAL_X Language=English If Command Extensions are enabled SETLOCAL changes as follows: SETLOCAL batch command now accepts optional arguments: ENABLEEXTENSIONS / DISABLEEXTENSIONS enable or disable command processor extensions. See CMD /? for details. ENABLEDELAYEDEXPANSION / DISABLEDELAYEDEXPANSION enable or disable delayed environment variable expansion. See SET /? for details. These modifications last until the matching ENDLOCAL command, regardless of their setting prior to the SETLOCAL command. The SETLOCAL command will set the ERRORLEVEL value if given an argument. It will be zero if one of the two valid arguments is given and one otherwise. You can use this in batch scripts to determine if the extensions are available, using the following technique: VERIFY OTHER 2>nul SETLOCAL ENABLEEXTENSIONS IF ERRORLEVEL 1 echo Unable to enable extensions This works because on old versions of CMD.EXE, SETLOCAL does NOT set the ERRORLEVEL value. The VERIFY command with a bad argument initializes the ERRORLEVEL value to a non-zero value. . MessageId= SymbolicName=MSG_HELP_ENDLOCAL_X Language=English If Command Extensions are enabled ENDLOCAL changes as follows: If the corresponding SETLOCAL enable or disabled command extensions using the new ENABLEEXTENSIONS or DISABLEEXTENSIONS options, then after the ENDLOCAL, the enabled/disabled state of command extensions will be restored to what it was prior to the matching SETLOCAL command execution. . MessageId= SymbolicName=MSG_HELP_START_X Language=English If Command Extensions are enabled, external command invocation through the command line or the START command changes as follows: non-executable files may be invoked through their file association just by typing the name of the file as a command. (e.g. WORD.DOC would launch the application associated with the .DOC file extension). See the ASSOC and FTYPE commands for how to create these associations from within a command script. When executing an application that is a 32-bit GUI application, CMD.EXE does not wait for the application to terminate before returning to the command prompt. This new behavior does NOT occur if executing within a command script. When executing a command line whose first token is the string "CMD " without an extension or path qualifier, then "CMD" is replaced with the value of the COMSPEC variable. This prevents picking up CMD.EXE from the current directory. When executing a command line whose first token does NOT contain an extension, then CMD.EXE uses the value of the PATHEXT environment variable to determine which extensions to look for and in what order. The default value for the PATHEXT variable is: .COM;.EXE;.BAT;.CMD Notice the syntax is the same as the PATH variable, with semicolons separating the different elements. When searching for an executable, if there is no match on any extension, then looks to see if the name matches a directory name. If it does, the START command launches the Explorer on that path. If done from the command line, it is the equivalent to doing a CD /D to that path. . MessageId= SymbolicName=MSG_HELP_BREAK_X Language=English If Command Extensions are enabled, and running on the Windows XP platform, then the BREAK command will enter a hard coded breakpoint if being debugged by a debugger. . MessageId= SymbolicName=MSG_HELP_FOR_X Language=English If Command Extensions are enabled, the following additional forms of the FOR command are supported: FOR /D %%variable IN (set) DO command [command-parameters] If set contains wildcards, then specifies to match against directory names instead of file names. FOR /R [[drive:]path] %%variable IN (set) DO command [command-parameters] Walks the directory tree rooted at [drive:]path, executing the FOR statement in each directory of the tree. If no directory specification is specified after /R then the current directory is assumed. If set is just a single period (.) character then it will just enumerate the directory tree. FOR /L %%variable IN (start,step,end) DO command [command-parameters] The set is a sequence of numbers from start to end, by step amount. So (1,1,5) would generate the sequence 1 2 3 4 5 and (5,-1,1) would generate the sequence (5 4 3 2 1) FOR /F ["options"] %%variable IN (file-set) DO command [command-parameters] FOR /F ["options"] %%variable IN ("string") DO command [command-parameters] FOR /F ["options"] %%variable IN ('command') DO command [command-parameters] or, if usebackq option present: FOR /F ["options"] %%variable IN (file-set) DO command [command-parameters] FOR /F ["options"] %%variable IN ('string') DO command [command-parameters] FOR /F ["options"] %%variable IN (`command`) DO command [command-parameters] filenameset is one or more file names. Each file is opened, read and processed before going on to the next file in filenameset. Processing consists of reading in the file, breaking it up into individual lines of text and then parsing each line into zero or more tokens. The body of the for loop is then called with the variable value(s) set to the found token string(s). By default, /F passes the first blank separated token from each line of each file. Blank lines are skipped. You can override the default parsing behavior by specifying the optional "options" parameter. This is a quoted string which contains one or more keywords to specify different parsing options. The keywords are: . MessageId= Language=English eol=c - specifies an end of line comment character (just one) skip=n - specifies the number of lines to skip at the beginning of the file. delims=xxx - specifies a delimiter set. This replaces the default delimiter set of space and tab. tokens=x,y,m-n - specifies which tokens from each line are to be passed to the for body for each iteration. This will cause additional variable names to be allocated. The m-n form is a range, specifying the mth through the nth tokens. If the last character in the tokens= string is an asterisk, then an additional variable is allocated and receives the remaining text on the line after the last token parsed. usebackq - specifies that the new semantics are in force, where a back quoted string is executed as a command and a single quoted string is a literal string command and allows the use of double quotes to quote file names in filenameset. Some examples might help: FOR /F "eol=; tokens=2,3* delims=, " %%i in (myfile.txt) do @echo %%i %%j %%k . MessageId= Language=English would parse each line in myfile.txt, ignoring lines that begin with a semicolon, passing the 2nd and 3rd token from each line to the for body, with tokens delimited by commas and/or spaces. Notice the for body statements reference %%i to get the 2nd token, %%j to get the 3rd token, and %%k to get all remaining tokens after the 3rd. For file names that contain spaces, you need to quote the filenames with double quotes. In order to use double quotes in this manner, you also need to use the usebackq option, otherwise the double quotes will be interpreted as defining a literal string to parse. %%i is explicitly declared in the for statement and the %%j and %%k are implicitly declared via the tokens= option. You can specify up to 26 tokens via the tokens= line, provided it does not cause an attempt to declare a variable higher than the letter 'z' or 'Z'. Remember, FOR variables are single-letter, case sensitive, global, and you can't have more than 52 total active at any one time. You can also use the FOR /F parsing logic on an immediate string, by making the filenameset between the parenthesis a quoted string, using single quote characters. It will be treated as a single line of input from a file and parsed. Finally, you can use the FOR /F command to parse the output of a command. You do this by making the filenameset between the parenthesis a back quoted string. It will be treated as a command line, which is passed to a child CMD.EXE and the output is captured into memory and parsed as if it was a file. So the following example: FOR /F "usebackq delims==" %%i IN (`set`) DO @echo %%i would enumerate the environment variable names in the current environment. . MessageId= Language=English In addition, substitution of FOR variable references has been enhanced. You can now use the following optional syntax: %%~I - expands %%I removing any surrounding quotes (") %%~fI - expands %%I to a fully qualified path name %%~dI - expands %%I to a drive letter only %%~pI - expands %%I to a path only %%~nI - expands %%I to a file name only %%~xI - expands %%I to a file extension only %%~sI - expanded path contains short names only %%~aI - expands %%I to file attributes of file %%~tI - expands %%I to date/time of file %%~zI - expands %%I to size of file %%~$PATH:I - searches the directories listed in the PATH environment variable and expands %%I to the fully qualified name of the first one found. If the environment variable name is not defined or the file is not found by the search, then this modifier expands to the empty string The modifiers can be combined to get compound results: %%~dpI - expands %%I to a drive letter and path only %%~nxI - expands %%I to a file name and extension only %%~fsI - expands %%I to a full path name with short names only %%~dp$PATH:I - searches the directories listed in the PATH environment variable for %%I and expands to the drive letter and path of the first one found. %%~ftzaI - expands %%I to a DIR like output line In the above examples %%I and PATH can be replaced by other valid values. The %%~ syntax is terminated by a valid FOR variable name. Picking upper case variable names like %%I makes it more readable and avoids confusion with the modifiers, which are not case sensitive. . MessageId= SymbolicName=MSG_HELP_IF_X Language=English If Command Extensions are enabled IF changes as follows: IF [/I] string1 compare-op string2 command IF CMDEXTVERSION number command IF DEFINED variable command where compare-op may be one of: EQU - equal NEQ - not equal LSS - less than LEQ - less than or equal GTR - greater than GEQ - greater than or equal and the /I switch, if specified, says to do case insensitive string compares. The /I switch can also be used on the string1==string2 form of IF. These comparisons are generic, in that if both string1 and string2 are both comprised of all numeric digits, then the strings are converted to numbers and a numeric comparison is performed. The CMDEXTVERSION conditional works just like ERRORLEVEL, except it is comparing against an internal version number associated with the Command Extensions. The first version is 1. It will be incremented by one when significant enhancements are added to the Command Extensions. CMDEXTVERSION conditional is never true when Command Extensions are disabled. The DEFINED conditional works just like EXISTS except it takes an environment variable name and returns true if the environment variable is defined. . MessageId= Language=English %%ERRORLEVEL%% will expand into a string representation of the current value of ERRORLEVEL, provided that there is not already an environment variable with the name ERRORLEVEL, in which case you will get its value instead. After running a program, the following illustrates ERRORLEVEL use: goto answer%%ERRORLEVEL%% :answer0 echo Program had return code 0 :answer1 echo Program had return code 1 You can also using the numerical comparisons above: IF %%ERRORLEVEL%% LEQ 1 goto okay %%CMDCMDLINE%% will expand into the original command line passed to CMD.EXE prior to any processing by CMD.EXE, provided that there is not already an environment variable with the name CMDCMDLINE, in which case you will get its value instead. %%CMDEXTVERSION%% will expand into a string representation of the current value of CMDEXTVERSION, provided that there is not already an environment variable with the name CMDEXTVERSION, in which case you will get its value instead. . MessageId= SymbolicName=MSG_HELP_KEYS Language=English Enables or disables command line editing on DOS system This is present for Compatibility with DOS systems. It has no effect under Windows XP, as command line editing is always enabled. . MessageId= SymbolicName=MSG_NO_UNC_INITDIR Language=English '%1' CMD.EXE was started with the above path as the current directory. UNC paths are not supported. Defaulting to Windows directory. . MessageId= SymbolicName=MSG_NO_UNC_CURDIR Language=English '%1' CMD does not support UNC paths as current directories. . MessageId= SymbolicName=MSG_SIM_UNC_CURDIR Language=English UNC paths not supported for current directory. Using PUSHD %1 to create temporary drive letter to support UNC current directory. Use POPD or EXIT to delete temporary drive letter. . MessageID= SymbolicName=MSG_SHIFT_BAD_ARG Language=English Invalid parameter to SHIFT command . MessageID= SymbolicName=MSG_SET_A_MISMATCHED_PARENS Language=English Unbalanced parenthesis. . MessageID= SymbolicName=MSG_SET_A_MISSING_OPERAND Language=English Missing operand. . MessageID= SymbolicName=MSG_SET_A_MISSING_OPERATOR Language=English Missing operator. . MessageID= SymbolicName=MSG_SET_A_INVALID_NUMBER Language=English Invalid number. Numeric constants are either decimal (17), hexadecimal (0x11), or octal (021). . MessageId= SymbolicName=MSG_SET_NUMBER_TOO_LARGE Language=English Invalid number. Numbers are limited to 32-bits of precision. . MessageID= SymbolicName=MSG_SET_A_DIVIDE_BY_ZERO Language=English Divide by zero error. . MessageID= SymbolicName=MSG_INVALID_COMSPEC Language=English The COMSPEC environment variable does not point to CMD.EXE. . MessageID= SymbolicName=MSG_MOVE_COPY_OVERWRITE Language=English Overwrite %1? (Yes/No/All): %0 . MessageId= SymbolicName=MSG_NOYESALL_RESPONSE_DATA Language=English NYA%0 . MessageId= SymbolicName=MSG_DIR_MOUNT_POINT Language=English %0 . MessageId= SymbolicName=MSG_DIR_TOO_LONG Language=English The directory name %1\%2 is too long. . MessageId= SymbolicName=MSG_FULL_PATH_TOO_LONG Language=English The full path of %1 is too long. . MessageId= SymbolicName=MSG_PATH_TOO_LONG Language=English The path %1\%2 is too long. . MessageId= SymbolicName=MSG_CANNOT_LOAD_LIB Language=English Unable to find library %1. . MessageId= SymbolicName=MSG_CANNOT_FIND_FUNC_NAME Language=English Cannot find function %1!S!:%2!S!. . MessageId= SymbolicName=MSG_CANNOT_FIND_FUNC_ORDINAL Language=English Cannot find ordinal %1!S!:%2!d!. . MessageID=10001 SymbolicName=MSG_FILE_NOT_FOUND Language=English File Not Found . MessageID=10002 SymbolicName=MSG_NOT_FOUND Language=English Could Not Find %1 . MessageID=10003 SymbolicName=MSG_TIME_NOT_SUPPORTED Language=English The FAT File System only support Last Write Times . MessageId=10004 SymbolicName=MSG_HELP_SETLOCAL Language=English Begins localization of environment changes in a batch file. Environment changes made after SETLOCAL has been issued are local to the batch file. ENDLOCAL must be issued to restore the previous settings. When the end of a batch script is reached, an implied ENDLOCAL is executed for any outstanding SETLOCAL commands issued by that batch script. SETLOCAL . MessageId=10005 SymbolicName=MSG_HELP_ENDLOCAL Language=English Ends localization of environment changes in a batch file. Environment changes made after ENDLOCAL has been issued are not local to the batch file; the previous settings are not restored on termination of the batch file. ENDLOCAL . MessageId=10006 SymbolicName=MSG_HELP_TITLE Language=English Sets the window title for the command prompt window. TITLE [string] string Specifies the title for the command prompt window. . MessageId=10007 SymbolicName=MSG_HELP_APPEND Language=English Allows programs to open data files in specified directories as if they were in the current directory. APPEND [[drive:]path[;...]] [/X[:ON | :OFF]] [/PATH:ON | /PATH:OFF] [/E] APPEND ; [drive:]path Specifies a drive and directory to append. /X:ON Applies appended directories to file searches and application execution. /X:OFF Applies appended directories only to requests to open files. /X:OFF is the default setting. /PATH:ON Applies the appended directories to file requests that already specify a path. /PATH:ON is the default setting. /PATH:OFF Turns off the effect of /PATH:ON. /E Stores a copy of the appended directory list in an environment variable named APPEND. /E may be used only the first time you use APPEND after starting up your system. Type APPEND ; to clear the appended directory list. Type APPEND without parameters to display the appended directory list. . MessageId=10008 SymbolicName=MSG_HELP_MOVE Language=English Moves files and renames files and directories. To move one or more files: MOVE [/Y | /-Y] [drive:][path]filename1[,...] destination To rename a directory: MOVE [/Y | /-Y] [drive:][path]dirname1 dirname2 [drive:][path]filename1 Specifies the location and name of the file or files you want to move. destination Specifies the new location of the file. Destination can consist of a drive letter and colon, a directory name, or a combination. If you are moving only one file, you can also include a filename if you want to rename the file when you move it. [drive:][path]dirname1 Specifies the directory you want to rename. dirname2 Specifies the new name of the directory. /Y Suppresses prompting to confirm you want to overwrite an existing destination file. /-Y Causes prompting to confirm you want to overwrite an existing destination file. The switch /Y may be present in the COPYCMD environment variable. This may be overridden with /-Y on the command line. Default is to prompt on overwrites unless MOVE command is being executed from within a batch script. . MessageId=10009 SymbolicName=MSG_HELP_PUSHDIR Language=English Stores the current directory for use by the POPD command, then changes to the specified directory. PUSHD [path | ..] path Specifies the directory to make the current directory. . MessageId=10010 SymbolicName=MSG_HELP_POPDIR Language=English Changes to the directory stored by the PUSHD command. POPD . MessageId=10011 SymbolicName=MSG_FILE_NAME_PRECEEDING_ERROR Language=English %1 - %0 . MessageId=10012 SymbolicName=MSG_MAX_SETLOCAL Language=English Maximum setlocal recursion level reached. . MessageId=10013 SymbolicName=MSG_ENTER_JAPAN_DATE Language=English Enter the new date: (yy-mm-dd) %0 . MessageId=10014 SymbolicName=MSG_ENTER_DEF_DATE Language=English Enter the new date: (dd-mm-yy) %0 . MessageID=10015 SymbolicName=MSG_VERIFY_FAIL Language=English ERROR Verify - %1 . MessageID=10016 SymbolicName=MSG_MOVE_MULTIPLE_FAIL Language=English Cannot move multiple files to a single file. . MessageId=10017 SymbolicName=MSG_RDR_HNDL_OPEN Language=English The handle could not be opened during redirection of handle %1. . MessageId=10018 SymbolicName=MSG_PROGRESS Language=English %r%1%% copied %0 . MessageId=10019 SymbolicName=MSG_HELP_COLOR Language=English Sets the default console foreground and background colors. COLOR [attr] attr Specifies color attribute of console output Color attributes are specified by TWO hex digits -- the first corresponds to the background; the second the foreground. Each digit can be any of the following values: 0 = Black 8 = Gray 1 = Blue 9 = Light Blue 2 = Green A = Light Green 3 = Aqua B = Light Aqua 4 = Red C = Light Red 5 = Purple D = Light Purple 6 = Yellow E = Light Yellow 7 = White F = Bright White If no argument is given, this command restores the color to what it was when CMD.EXE started. This value either comes from the current console window, the /T command line switch or from the DefaultColor registry value. The COLOR command sets ERRORLEVEL to 1 if an attempt is made to execute the COLOR command with a foreground and background color that are the same. Example: "COLOR fc" produces light red on bright white . MessageId=10020 SymbolicName=MSG_MAX_PATH_EXCEEDED Language=English Maximum path length exceeded - %1 . MessageId=10023 SymbolicName=MSG_ERROR_BATCH_RECURSION Language=English ****** B A T C H R E C U R S I O N exceeds STACK limits ****** Recursion Count=%1!d!, Stack Usage=%2!d! percent ****** B A T C H PROCESSING IS A B O R T E D ****** . MessageId=10024 SymbolicName=MSG_ERROR_PUSHD_DEPTH_EXCEEDED Language=English There are too many directories already in the PUSHD stack. . MessageId=10025 SymbolicName=MSG_DISABLED_BY_POLICY Language=English The command prompt has been disabled by your administrator. . ;#endif // _CMDMSG_