------------------------------------------------------------------------------- THIS FILE IS NO LONGER USED! It is being retained for historical purposes, in case we should need to refer to previously-existing (and largely broken) analog joystick code. It should not be distributed to 3rd parties. ------------------------------------------------------------------------------- //TODO check return and irp->status returns for all routines. Trace 'em as far as necessary. /*++ BUILD Version: 0001 // Increment this if a change has global effects Copyright (c) 1995, 1996 Microsoft Corporation Module Name: swndr3p.c Abstract: Kernel mode device driver for Microsoft SideWinder 3p joystick device Author: edbriggs 30-Nov-95 Revision History: stevez May 96 removed unused code, including analog and 1-bit digital modes. See analog3p.c, .h for original version May need 1-bit digital mode for Aztec game cards, may want analog for future release. NB there is still a lot of unnecessary code left in this driver RtlLargeIntegerX calls are historical and can be replaced by __int64 compiler supported arithmetic. 6/10/96 registry variables now being used for port address 6/10/96 resets enhanced digital mode if joystick goes to analog mode during use (for example if user toggles "emulation" switch) 6/13/96 limits polling to 100/s by setting min time between polls to 10ms 6/13/96 code structure revised in SidewndrPoll and subroutines --*/ /* * $Header: /Joystick/Sidewinder/swndr3p.c 19 1/09/96 10:26p Edbriggs $ */ #include #include #include #include #include //#include "joylog.h" // // Device extension data // typedef struct { // // JOYSTICKID0 or JOYDSTICKID1 // DWORD DeviceNumber; // // Number of axes supported and configured for this device. The // Sidewinder 3P supports a maximum of 4 axes // DWORD NumberOfAxes; // // Current operating mode of the device: // { Invalid | Analog | Digital | Enhanced | Maximum } // DWORD CurrentDeviceMode; // // The I/O address of the device. Note, this may be a memory mapped // address // PUCHAR DeviceAddress; // // Boolean denoting whether this address is mapped (TRUE) or not) // BOOL DeviceIsMapped; // // A Spinlock is used to synchronize access to this device. This is // a pointer to the actual spinlock data area // PKSPIN_LOCK SpinLock; // // Actual SpinLock data area // KSPIN_LOCK SpinLockData; } JOY_EXTENSION, *PJOY_EXTENSION; // // Debugging macros // #ifdef DEBUG #define ENABLE_DEBUG_TRACE #endif #ifdef ENABLE_DEBUG_TRACE #define DebugTrace(_x_) \ DbgPrint("Joystick : "); \ KdPrint(_x_); \ DbgPrint("\n"); #else #define DebugTrace(_x_) #endif // // Condition Compilation Directives // // // Global values used to speed up calculations in sampling loops // Also calibration constants set in DriverEntry // ------------------------------------------------------------- // JOY_STATISTICS JoyStatistics; // These are used for debugging and performance testing // // The high resolution system clock (from KeQueryPerformanceCounter) // is updated at this frequency // DWORD Frequency; // // The latency in a call to KeQueryPerformanceCounter in microseconds // DWORD dwQPCLatency; // // After a write to the joystick port, we spin in a read-port loop, waiting // for a bit to go high. // This is the number of iterations to spin before timing out. Set // to timeout after about 2 milliseconds LONG nReadLoopMax; // // Values for KeDelayExecutionThread // LARGE_INTEGER LI1ms; LARGE_INTEGER LI2ms; LARGE_INTEGER LI8ms; LARGE_INTEGER LI10ms; // // number of KeQueryPerformanceCounter ticks in 1 millisecond // (used to prevent too-frequent polling of joystick) // DWORD nMinTicksBetweenPolls; // // Assembly area for digital packets // BYTE NormalPacket[8]; BYTE EnhancedPacket[21]; // // Last good packet // BOOL bLastGoodPacket; JOY_DD_INPUT_DATA jjLastGoodPacket; // // time at which the joystick was last polled // LARGE_INTEGER liLastPoll; // set whenever the joystick's polled // // End of Global Values // --------------------- // // // Routine Prototypes // NTSTATUS DriverEntry( IN PDRIVER_OBJECT pDriverObject, IN PUNICODE_STRING RegistryPathName ); NTSTATUS SidewndrCreateDevice( PDRIVER_OBJECT pDriverObject, PWSTR DeviceNameBase, DWORD DeviceNumber, DWORD ExtensionSize, BOOLEAN Exclusive, DWORD DeviceType, PDEVICE_OBJECT *DeviceObject ); NTSTATUS SidewndrDispatch( IN PDEVICE_OBJECT pDO, IN PIRP pIrp ); NTSTATUS SidewndrReportNullResourceUsage( PDEVICE_OBJECT DeviceObject ); NTSTATUS SidewndrReadRegistryParameterDWORD( PUNICODE_STRING RegistryPathName, PWSTR ParameterName, PDWORD ParameterValue ); NTSTATUS SidewndrMapDevice( DWORD PortBase, DWORD NumberOfPorts, PJOY_EXTENSION pJoyExtension ); VOID SidewndrUnload( PDRIVER_OBJECT pDriverObject ); NTSTATUS SidewndrPoll( IN PDEVICE_OBJECT pDO, IN PIRP pIrp ); NTSTATUS SidewndrEnhancedDigitalPoll( IN PDEVICE_OBJECT pDO, IN PIRP pIrp ); BOOL SidewndrQuiesce( PUCHAR JoyPort, UCHAR Mask ); DWORD TimeInMicroSeconds( DWORD dwTime ); DWORD TimeInTicks( DWORD dwTimeInMicroSeconds ); NTSTATUS SidewndrWaitForClockEdge( DWORD edge, BYTE *pByte, PUCHAR JoyPort ); NTSTATUS SidewndrReset( PUCHAR JoyPort ); NTSTATUS SidewndrStartAnalogMode( PUCHAR JoyPort ); NTSTATUS SidewndrStartDigitalMode( PUCHAR JoyPort ); NTSTATUS SidewndrStartEnhancedMode( PUCHAR JoyPort ); NTSTATUS SidewndrGetEnhancedPacket( PUCHAR joyPort ); NTSTATUS SidewndrInterpretEnhancedPacket( PJOY_DD_INPUT_DATA pInput ); int lstrnicmpW( LPWSTR pszA, LPWSTR pszB, size_t cch ); VOID SidewndrWait ( DWORD TotalWait // in uS ); BOOL SidewndrReadWait ( PUCHAR JoyPort, UCHAR Mask ); void SidewndrGetConfig( LPJOYREGHWCONFIG pConfig, PJOY_EXTENSION pJoyExtension ); NTSTATUS DriverEntry( IN PDRIVER_OBJECT pDriverObject, IN PUNICODE_STRING RegistryPathName ) /*++ Routine Description: This routine is called at system initialization time to initialize this driver. Arguments: DriverObject - Supplies the driver object. RegistryPath - Supplies the registry path for this driver. Return Value: STATUS_SUCCESS STATUS_DEVICE_CONFIGURATION_ERROR - Wrong number of axi in the registry or error status from NT itself --*/ { NTSTATUS Status; PDEVICE_OBJECT JoyDevice0; PDEVICE_OBJECT JoyDevice1; DWORD NumberOfAxes; DWORD DeviceAddress; DWORD DeviceType; // // See how many axes we have from the registry parameters. These parameters // are set up by the driver installation program, and can be modified by // control panel // //DbgBreakPoint(); JoyStatistics.nVersion = 16; // global, initialize it first thing so we for sure what we're running DebugTrace(("Sidewndr %d", JoyStatistics.nVersion)); Status = SidewndrReadRegistryParameterDWORD( RegistryPathName, JOY_DD_NAXES_U, &NumberOfAxes ); DebugTrace(("Number of axes returned from registry: %d", NumberOfAxes)); if (!NT_SUCCESS(Status)) { SidewndrUnload(pDriverObject); return Status; } if (( NumberOfAxes < 2) || (NumberOfAxes > 4)) { SidewndrUnload(pDriverObject); Status = STATUS_DEVICE_CONFIGURATION_ERROR; return Status; } // // See if the registry contains a device address other than the // default of 0x201 // Status = SidewndrReadRegistryParameterDWORD( RegistryPathName, JOY_DD_DEVICE_ADDRESS_U, &DeviceAddress ); if (NT_SUCCESS(Status)) { DebugTrace(("Registry specified device address of 0x%x", DeviceAddress)); } else { DebugTrace(("Using default device address of 0x%x", JOY_IO_PORT_ADDRESS)); DeviceAddress = JOY_IO_PORT_ADDRESS; } // // See if there is a device type specified in the registry // Status = SidewndrReadRegistryParameterDWORD( RegistryPathName, JOY_DD_DEVICE_TYPE_U, &DeviceType ); if (!NT_SUCCESS(Status)) { DebugTrace(("No device type entry for joystick")); SidewndrUnload(pDriverObject); Status = STATUS_DEVICE_CONFIGURATION_ERROR; return Status; } DebugTrace(("Joystick device type %d", DeviceType)); // set global large_integers for KeDelayExecutionThread (negative numbers for relative time) // NB KeDelayExecutionThread calls typically take at least 10 milliseconds on the pentium75 I used for testing, // no matter how little time is requested LI1ms = RtlConvertLongToLargeInteger(- 10000); LI2ms = RtlConvertLongToLargeInteger(- 20000); LI8ms = RtlConvertLongToLargeInteger(- 80000); LI10ms = RtlConvertLongToLargeInteger(-100000); // // Calculate time thresholds for analog device // { DWORD Remainder; LARGE_INTEGER LargeFrequency; DWORD ulStart, ulTemp, ulEnd; DWORD dwTicks, dwTimems; int i; BYTE byteJoy, byteTmp; // // Get the system timer resolution expressed in Hertz. // KeQueryPerformanceCounter(&LargeFrequency); Frequency = LargeFrequency.LowPart; DebugTrace(("Frequency: %u", Frequency)); // need latency for KeQueryPerformanceCounter. While we're at it, let's // get min time for delay and stall execution ulStart = KeQueryPerformanceCounter(NULL).LowPart; for (i = 0; i < 1000; i++) { ulTemp = KeQueryPerformanceCounter(NULL).LowPart; } dwTicks = ulTemp - ulStart; dwTimems = TimeInMicroSeconds (dwTicks); dwQPCLatency = (dwTimems / 1000) + 1; // round up /* following code used only for testing timing of kernel timing routines ulStart = KeQueryPerformanceCounter(NULL).LowPart; KeDelayExecutionThread( KernelMode, FALSE, &LI2ms); ulEnd = KeQueryPerformanceCounter(NULL).LowPart; DebugTrace(("QPC latency in uS: %u, DET(2ms) in ticks: %u ticks", dwQPCLatency, ulEnd - ulStart)); ulStart = KeQueryPerformanceCounter(NULL).LowPart; for (i = 0; i < 1000; i++) { KeStallExecutionProcessor(1); // 1 microsecond (Hah!) } ulEnd = KeQueryPerformanceCounter(NULL).LowPart; DebugTrace(("KeStallExecutionProcessor(1) called 1000 times, in ticks: %u", ulEnd - ulStart)); */ } // // Attempt to create the device // Status = SidewndrCreateDevice( pDriverObject, JOY_DD_DEVICE_NAME_U, // device driver 0, sizeof(JOY_EXTENSION), FALSE, // exclusive access FILE_DEVICE_UNKNOWN, &JoyDevice0); if (!NT_SUCCESS(Status)) { DebugTrace(("SwndrCreateDevice returned %x", Status)); SidewndrUnload(pDriverObject); return Status; } ((PJOY_EXTENSION)JoyDevice0->DeviceExtension)->DeviceNumber = JOYSTICKID1; ((PJOY_EXTENSION)JoyDevice0->DeviceExtension)->NumberOfAxes = NumberOfAxes; ((PJOY_EXTENSION)JoyDevice0->DeviceExtension)->CurrentDeviceMode = SIDEWINDER3P_ANALOG_MODE; ((PJOY_EXTENSION)JoyDevice0->DeviceExtension)->DeviceIsMapped = FALSE; ((PJOY_EXTENSION)JoyDevice0->DeviceExtension)->DeviceAddress = (PUCHAR) 0; // // Initialize the spinlock used to synchronize access to this device // KeInitializeSpinLock(&((PJOY_EXTENSION)JoyDevice0->DeviceExtension)->SpinLockData); ((PJOY_EXTENSION)JoyDevice0->DeviceExtension)->SpinLock = &((PJOY_EXTENSION)JoyDevice0->DeviceExtension)->SpinLockData; // // Get the device address into the device extension // Status = SidewndrMapDevice( DeviceAddress, 1, (PJOY_EXTENSION)JoyDevice0->DeviceExtension); // Calibrate nReadLoopMax for spinning in read_port loops to timeout after 2ms { int i; PBYTE JoyPort; DWORD ulStart, ulEnd; BYTE byteJoy; int LoopTimeInMicroSeconds; i = 1000; JoyPort = ((PJOY_EXTENSION)JoyDevice0->DeviceExtension)->DeviceAddress; ulStart = KeQueryPerformanceCounter(NULL).LowPart; while (i--){ byteJoy = READ_PORT_UCHAR(JoyPort); if ((byteJoy & X_AXIS_BITMASK)) { ; } } ulEnd = KeQueryPerformanceCounter(NULL).LowPart; LoopTimeInMicroSeconds = TimeInMicroSeconds (ulEnd - ulStart); nReadLoopMax = (1000 * 2000) / LoopTimeInMicroSeconds; // want 2 mS for nReadLoopMax iterations DebugTrace(("READ_PORT_UCHAR loop, 1000 interations: %u ticks", ulEnd - ulStart)); DebugTrace(("nReadLoopMax: %u", nReadLoopMax)); } // // if only 2 axes were requested, we can support a second device // // Number of axed should be 4 here, since we're only supporting sidewinder // in enhanced digital mode. Leave this code in just for safety. if (2 == NumberOfAxes) { Status = SidewndrCreateDevice( pDriverObject, JOY_DD_DEVICE_NAME_U, 1, // device number sizeof (JOY_EXTENSION), FALSE, // exclusive access FILE_DEVICE_UNKNOWN, &JoyDevice1); if (!NT_SUCCESS(Status)) { DebugTrace(("Create device for second device returned %x", Status)); SidewndrUnload(pDriverObject); return Status; } // // In the analog world (which we are in if there are 2 devices, both // devices share the same I/O address so just copy it from JoyDevice0 // ((PJOY_EXTENSION)JoyDevice1->DeviceExtension)->DeviceIsMapped = ((PJOY_EXTENSION)JoyDevice0->DeviceExtension)->DeviceIsMapped; ((PJOY_EXTENSION)JoyDevice1->DeviceExtension)->DeviceAddress = ((PJOY_EXTENSION)JoyDevice0->DeviceExtension)->DeviceAddress; } // // Place the enty points in our driver object // pDriverObject->DriverUnload = SidewndrUnload; pDriverObject->MajorFunction[IRP_MJ_CREATE] = SidewndrDispatch; pDriverObject->MajorFunction[IRP_MJ_CLOSE] = SidewndrDispatch; pDriverObject->MajorFunction[IRP_MJ_READ] = SidewndrDispatch; pDriverObject->MajorFunction[IRP_MJ_DEVICE_CONTROL] = SidewndrDispatch; // // Zero statistics, set misc globals // JoyStatistics.EnhancedPolls = 0; JoyStatistics.EnhancedPollTimeouts = 0; JoyStatistics.EnhancedPollErrors = 0; JoyStatistics.nPolledTooSoon = 0; JoyStatistics.nReset = 0; { int i; for (i = 0; i < MAX_ENHANCEDMODE_ATTEMPTS; i++) { JoyStatistics.Retries[i] = 0; } } bLastGoodPacket = FALSE; liLastPoll = KeQueryPerformanceCounter (NULL); // allow max of 100 polls/s (min time between polls 10ms), which reduces time spinning in the NT kernel nMinTicksBetweenPolls = TimeInTicks (10000); return STATUS_SUCCESS; } NTSTATUS SidewndrCreateDevice( PDRIVER_OBJECT pDriverObject, PWSTR DeviceNameBase, DWORD DeviceNumber, DWORD ExtensionSize, BOOLEAN Exclusive, DWORD DeviceType, PDEVICE_OBJECT *DeviceObject ) /*++ Routine Description: This routine is called at driver initialization time to create the device. The device is created to use Buffered IO. Arguments: pDriverObject - Supplies the driver object. DeviceNameBase - The base name of the device to which a number is appended DeviceNumber - A number which will be appended to the device name ExtensionSize - Size of the device extension area Exclusive - True if exclusive access should be enforced DeviceType - NT Device type this device is modeled after DeviceObject - pointer to the device object Return Value: STATUS_SUCCESS or error status from NT itself --*/ { WCHAR DeviceName[100]; WCHAR UnicodeDosDeviceName[200]; UNICODE_STRING UnicodeDeviceName; NTSTATUS Status; int Length; (void) wcscpy(DeviceName, DeviceNameBase); Length = wcslen(DeviceName); DeviceName[Length + 1] = L'\0'; DeviceName[Length] = (USHORT) (L'0' + DeviceNumber); (void) RtlInitUnicodeString(&UnicodeDeviceName, DeviceName); Status = IoCreateDevice( pDriverObject, ExtensionSize, &UnicodeDeviceName, DeviceType, 0, (BOOLEAN) Exclusive, DeviceObject ); if (!NT_SUCCESS(Status)) { return Status; } RtlInitUnicodeString((PUNICODE_STRING) &UnicodeDosDeviceName, L"\\DosDevices\\Joy1"); Status = IoCreateSymbolicLink( (PUNICODE_STRING) &UnicodeDosDeviceName, (PUNICODE_STRING) &UnicodeDeviceName ); if (!NT_SUCCESS(Status)) { return Status; } // Set the flag signifying that we will do buffered I/O. This causes NT // to allocate a buffer on a ReadFile operation which will then be copied // back to the calling application by the I/O subsystem (*DeviceObject)->Flags |= DO_BUFFERED_IO; return Status; } NTSTATUS SidewndrReadRegistryParameterDWORD( PUNICODE_STRING RegistryPathName, PWSTR ParameterName, PDWORD ParameterValue ) /*++ Routine Description: This routine reads registry values for the driver configuration Arguments: RegistryPathName - Registry path containing the desired parameters ParameterName - The name of the parameter ParameterValue - Variable to receive the parameter value Return Value: STATUS_SUCCESS -- STATUS_NO_MORE_ENTRIES -- Couldn't find any entries STATUS_INSUFFICIENT_RESOURCES -- Couldn't allocate paged pool STATUS_DEVICE_CONFIGURATION_ERROR -- Returned value wasn't a DWORD or error status from NT itself --*/ { OBJECT_ATTRIBUTES ObjectAttributes; NTSTATUS Status; HANDLE ServiceKey; HANDLE DeviceKey; // Key handle of service node UNICODE_STRING DeviceName; // Key to parameter node DWORD KeyIndex; DWORD KeyValueLength; PBYTE KeyData; BOOL ValueWasFound; PKEY_VALUE_FULL_INFORMATION KeyInfo; InitializeObjectAttributes( &ObjectAttributes, RegistryPathName, OBJ_CASE_INSENSITIVE, NULL, (PSECURITY_DESCRIPTOR) NULL); // // Open a key for our services node entry // Status = ZwOpenKey( &ServiceKey, KEY_READ | KEY_WRITE, &ObjectAttributes); if (!NT_SUCCESS(Status)) { return Status; } // // Open the key to our device subkey // RtlInitUnicodeString(&DeviceName, L"Parameters"); InitializeObjectAttributes( &ObjectAttributes, &DeviceName, OBJ_CASE_INSENSITIVE, ServiceKey, (PSECURITY_DESCRIPTOR) NULL); Status = ZwOpenKey (&DeviceKey, KEY_READ | KEY_WRITE, &ObjectAttributes); ZwClose(ServiceKey); if (!NT_SUCCESS(Status)) { return Status; } // // Loop reading our key values // // TODO exit loop when value is found? ValueWasFound = FALSE; for (KeyIndex = 0; ; KeyIndex++) { KeyValueLength = 0; // // find out how much data we will get // Status = ZwEnumerateValueKey( DeviceKey, KeyIndex, KeyValueFullInformation, NULL, 0, &KeyValueLength); if (STATUS_NO_MORE_ENTRIES == Status) { break; } if (0 == KeyValueLength) { return Status; } // // Read the data // KeyData = ExAllocatePool (PagedPool, KeyValueLength); if (NULL == KeyData) { return STATUS_INSUFFICIENT_RESOURCES; } Status = ZwEnumerateValueKey( DeviceKey, KeyIndex, KeyValueFullInformation, KeyData, KeyValueLength, &KeyValueLength); if (!NT_SUCCESS(Status)) { ExFreePool(KeyData); return Status; } KeyInfo = (PKEY_VALUE_FULL_INFORMATION) KeyData; if (0 == lstrnicmpW(KeyInfo->Name, ParameterName, KeyInfo->NameLength / sizeof(WCHAR))) { // check its a DWORD if (REG_DWORD != KeyInfo->Type) { ExFreePool(KeyData); return STATUS_DEVICE_CONFIGURATION_ERROR; } ValueWasFound = TRUE; *ParameterValue = *(PDWORD) (KeyData + KeyInfo->DataOffset); } ExFreePool(KeyData); } return (ValueWasFound) ? STATUS_SUCCESS : STATUS_DEVICE_CONFIGURATION_ERROR; } NTSTATUS SidewndrDispatch( IN PDEVICE_OBJECT pDO, IN PIRP pIrp ) /*++ Routine Description: Driver dispatch routine. Processes IRPs based on IRP MajorFunction Arguments: pDO -- pointer to the device object pIrp -- pointer to the IRP to process Return Value: Returns the value of the IRP IoStatus.Status --*/ { PIO_STACK_LOCATION pIrpStack; KIRQL OldIrql; NTSTATUS Status; DWORD dwRetries = 0; //DbgBreakPoint(); pIrpStack = IoGetCurrentIrpStackLocation(pIrp); Status = STATUS_SUCCESS; pIrp->IoStatus.Status = Status; pIrp->IoStatus.Information = 0; switch (pIrpStack->MajorFunction) { case IRP_MJ_CREATE: // // perform synchronous I/O // //pIrpStack->FileObject->Flags |= FO_SYNCHRONOUS_IO; //NB This is bad code -- we are simply one thread wandering off through the computer -- we should be queuing up a DPC, //returning status_pending to the calling program, then finishing the job when the dpc goes. This is possible given //the analog game port technology. Status = SidewndrReset (((PJOY_EXTENSION)pDO->DeviceExtension)->DeviceAddress); ((PJOY_EXTENSION)pDO->DeviceExtension)->CurrentDeviceMode = SIDEWINDER3P_ENHANCED_DIGITAL_MODE; //KeDelayExecutionThread( KernelMode, FALSE, &LI10ms); //unnecessary since SidewndrReset has a delay in it? pIrp->IoStatus.Status = Status; break; case IRP_MJ_CLOSE: break; case IRP_MJ_READ: // // Find out which device we are and read, but first make sure // there is enough room // DebugTrace(("IRP_MJ_READ")); //DbgBreakPoint(); if (pIrpStack->Parameters.Read.Length < sizeof(JOY_DD_INPUT_DATA)) { Status = STATUS_BUFFER_TOO_SMALL; pIrp->IoStatus.Status = Status; break; } // // Serialize and get the current device values // KeAcquireSpinLock(((PJOY_EXTENSION) pDO->DeviceExtension)->SpinLock, & OldIrql); Status = SidewndrPoll(pDO, pIrp); // // release the spinlock // KeReleaseSpinLock(((PJOY_EXTENSION)pDO->DeviceExtension)->SpinLock, OldIrql); pIrp->IoStatus.Status = Status; pIrp->IoStatus.Information = sizeof (JOY_DD_INPUT_DATA); break; case IRP_MJ_DEVICE_CONTROL: switch (pIrpStack->Parameters.DeviceIoControl.IoControlCode) { case IOCTL_JOY_GET_STATISTICS: // report statistics ((PJOY_STATISTICS)pIrp->AssociatedIrp.SystemBuffer)->nVersion = JoyStatistics.nVersion; ((PJOY_STATISTICS)pIrp->AssociatedIrp.SystemBuffer)->EnhancedPolls = JoyStatistics.EnhancedPolls; ((PJOY_STATISTICS)pIrp->AssociatedIrp.SystemBuffer)->EnhancedPollTimeouts = JoyStatistics.EnhancedPollTimeouts; ((PJOY_STATISTICS)pIrp->AssociatedIrp.SystemBuffer)->EnhancedPollErrors = JoyStatistics.EnhancedPollErrors; ((PJOY_STATISTICS)pIrp->AssociatedIrp.SystemBuffer)->nPolledTooSoon = JoyStatistics.nPolledTooSoon; ((PJOY_STATISTICS)pIrp->AssociatedIrp.SystemBuffer)->nReset = JoyStatistics.nReset; { int i; for (i = 0; i < MAX_ENHANCEDMODE_ATTEMPTS; i++) { ((PJOY_STATISTICS)pIrp->AssociatedIrp.SystemBuffer)->Retries[i] = JoyStatistics.Retries[i]; } } ((PJOY_STATISTICS)pIrp->AssociatedIrp.SystemBuffer)->dwQPCLatency = dwQPCLatency; ((PJOY_STATISTICS)pIrp->AssociatedIrp.SystemBuffer)->nReadLoopMax = nReadLoopMax; ((PJOY_STATISTICS)pIrp->AssociatedIrp.SystemBuffer)->Frequency = Frequency; Status = STATUS_SUCCESS; pIrp->IoStatus.Status = Status; pIrp->IoStatus.Information = sizeof(JOY_STATISTICS); // reset statistics JoyStatistics.EnhancedPolls = 0; JoyStatistics.EnhancedPollTimeouts = 0; JoyStatistics.EnhancedPollErrors = 0; JoyStatistics.nPolledTooSoon = 0; JoyStatistics.nReset = 0; { int i; for (i = 0; i < MAX_ENHANCEDMODE_ATTEMPTS; i++) { JoyStatistics.Retries[i] = 0; } } break; case IOCTL_JOY_GET_JOYREGHWCONFIG: SidewndrGetConfig ( (LPJOYREGHWCONFIG)(pIrp->AssociatedIrp.SystemBuffer), ((PJOY_EXTENSION)pDO->DeviceExtension) ); pIrp->IoStatus.Information = sizeof(JOYREGHWCONFIG); break; default: DebugTrace(("Unknown IoControlCode")); break; } // end switch on IOCTL code break; default: DebugTrace(("Unknown IRP Major Function %d", pIrpStack->MajorFunction)); } // end switch on IRP_MAJOR_XXXX // pIrp->IoStatus.Status must be set to Status by this point. // pIrp->IoStatus.Information must be set to the correct size by this point. IoCompleteRequest(pIrp, IO_NO_INCREMENT); return Status; } VOID SidewndrUnload( PDRIVER_OBJECT pDriverObject ) /*++ Routine Description: Driver unload routine. Deletes the device objects Arguments: pDriverObject -- pointer to the driver object whose devices we are about to delete. Return Value: Returns Nothing --*/ { DWORD DeviceNumber; WCHAR UnicodeDosDeviceName[200]; // // Delete all of our devices // while (pDriverObject->DeviceObject) { DeviceNumber = ((PJOY_EXTENSION)pDriverObject->DeviceObject->DeviceExtension)-> DeviceNumber; // // withdraw claims on hardware by reporting no resource utilization // if (pDriverObject->DeviceObject) { if (DeviceNumber == 0) { SidewndrReportNullResourceUsage(pDriverObject->DeviceObject); } } RtlInitUnicodeString( (PUNICODE_STRING) &UnicodeDosDeviceName, L"\\DosDevices\\Joy1"); IoDeleteSymbolicLink( (PUNICODE_STRING) &UnicodeDosDeviceName); DebugTrace(("Freeing device %d", DeviceNumber)); IoDeleteDevice(pDriverObject->DeviceObject); } } NTSTATUS SidewndrPoll( IN PDEVICE_OBJECT pDO, IN PIRP pIrp ) /*++ Routine Description: Polls the device for position and button information. The polling method (analog, digital, enhanced) is selected by the CurrentDeviceMode variable in the device extension. Only enhanced digital allowed. If other modes are necessary, cut and paste (and test!) the code from file analog3p.c Arguments: pDO -- pointer to the device object pIrp -- pointer to the IRP to process if successful, data is put into the pIrp Return Value: STATUS_SUCCESS -- if the poll succeeded, STATUS_TIMEOUT -- if the poll failed --*/ { NTSTATUS Status; PJOY_DD_INPUT_DATA pInput; pInput = (PJOY_DD_INPUT_DATA)pIrp->AssociatedIrp.SystemBuffer; Status = STATUS_TIMEOUT; pIrp->IoStatus.Status = Status; if (pInput != NULL) { pInput->Unplugged = TRUE; // until proven otherwise } switch (((PJOY_EXTENSION)pDO->DeviceExtension)->CurrentDeviceMode) { case SIDEWINDER3P_INVALID_MODE: break; case SIDEWINDER3P_ANALOG_MODE: break; case SIDEWINDER3P_DIGITAL_MODE: break; case SIDEWINDER3P_ENHANCED_DIGITAL_MODE: // Don't poll too frequently, instead return last good packet if (KeQueryPerformanceCounter(NULL).QuadPart < liLastPoll.QuadPart + nMinTicksBetweenPolls) { JoyStatistics.nPolledTooSoon++; if (bLastGoodPacket) { RtlCopyMemory (pInput, &jjLastGoodPacket, sizeof (JOY_DD_INPUT_DATA)); Status = STATUS_SUCCESS; } else { // no last packet, too soon to poll, nothing we can do Status = STATUS_TIMEOUT; } break; } // Poll the joystick Status = SidewndrEnhancedDigitalPoll(pDO, pIrp); if (Status == STATUS_SUCCESS) { // Everything's fine break; } else { // timed out, maybe user switched to analog mode? Status = SidewndrReset ( (PUCHAR) ((PJOY_EXTENSION)pDO->DeviceExtension)->DeviceAddress); JoyStatistics.nReset++; if (Status != STATUS_SUCCESS) { // won't go digital, maybe unplugged, nothing we can do break; } } // Now in enhanced digital mode, try polling it again (if user switches joystick between prev lines and // this line, we'll time out, next query to the joystick will find and solve the problem) Status = SidewndrEnhancedDigitalPoll(pDO, pIrp); break; case SIDEWINDER3P_MAXIMUM_MODE: break; default: break; } pIrp->IoStatus.Status = Status; return Status; } NTSTATUS SidewndrEnhancedDigitalPoll( IN PDEVICE_OBJECT pDO, IN PIRP pIrp ) { PUCHAR joyPort; NTSTATUS PollStatus; NTSTATUS DecodeStatus; DWORD MaxRetries; joyPort = ((PJOY_EXTENSION)pDO->DeviceExtension)->DeviceAddress; // Try to get a good enhanced mode packet up to MAX_ENHANCEDMODE_ATTEMPTS // If there is a timeout, or if the data are invalid (bad checksum or sync // bits) wait 1ms for the joystick to reset itself, and try again. // // Note that although this should eventually get a good packet, packets // discarded in the interim (because of errors) will cause button presses // to be lost. // // Although this loses data, it keeps bad data from reaching the caller, // which seem to be about the best we can do at this stage. // // We keep a count of all the errors so that we keep track of just // how bad the situation really is. // for( MaxRetries = 0; MaxRetries < MAX_ENHANCEDMODE_ATTEMPTS; MaxRetries++) { // try to read (poll) the device liLastPoll = KeQueryPerformanceCounter (NULL); PollStatus = SidewndrGetEnhancedPacket(joyPort); ++JoyStatistics.EnhancedPolls; if (PollStatus != STATUS_SUCCESS) { // There was a timeout of some sort on the device read. ++JoyStatistics.EnhancedPollTimeouts; } else { // The device read completed. Process the data and verify the checksum // and sync bits. The processed data will be in AssociatedIrp.SystemBuffer DecodeStatus = SidewndrInterpretEnhancedPacket( (PJOY_DD_INPUT_DATA)pIrp->AssociatedIrp.SystemBuffer); if (DecodeStatus != STATUS_SUCCESS) { // The data was bad, most likely because we missed some of the nibbles. ++JoyStatistics.EnhancedPollErrors; } else { // Everything worked as we had hoped. The data has already been // deposited in the AssociatedIrp.SystemBuffer. JoyStatistics.Retries[MaxRetries]++; return STATUS_SUCCESS; } } // We did not succeed in reading the packet. Wait 1 ms for the device to // stabilize before re-trying the read //KeDelayExecutionThread( KernelMode, FALSE, &LI1ms); // cannot use KeDelayExecutionThread here // because we're at dispatch level, thanks // to the spin lock we hold // Mail from manolito says (64-48)*10us = 160us should be enough. But I seem to recall reading 21 packets out of 66 sent. // Pending answer from manolito, set to 450us. SidewndrWait (450); // this is bad because it monopolizes the cpu, but since we're spinlocked anyway, what the heck, do it. } // We exceeded MAX_ENHANCEDMODE_ATTEMPTS. Something is pretty badly wrong; // in any case, a higher level caller will have to decide what to do return STATUS_TIMEOUT; } NTSTATUS SidewndrReportNullResourceUsage( PDEVICE_OBJECT DeviceObject ) { BOOLEAN ResourceConflict; CM_RESOURCE_LIST ResourceList; NTSTATUS Status; ResourceList.Count = 0; // // Report our usage and detect conflicts // Status = IoReportResourceUsage( NULL, DeviceObject->DriverObject, &ResourceList, sizeof(DWORD), DeviceObject, NULL, 0, FALSE, &ResourceConflict); if (NT_SUCCESS(Status)) { if (ResourceConflict) { return STATUS_DEVICE_CONFIGURATION_ERROR; } else { return STATUS_SUCCESS; } } else { return Status; } } BOOL SidewndrQuiesce( PUCHAR JoyPort, UCHAR Mask ) /*++ Routine Description: This routine attempts to insure that the joystick is not still active as a result of an earlier operation. This is accomplished by repeatedly reading the device and checking that no bits are set in the supplied mask. The idea is to check that none of the analog bits (resistive bits) are in use. Arguments: JoyPort - the address of the port (as returned from hal) Mask - the mask specifying which analog bits should be checked. Return Value: TRUE Quiesce operation succeeded FALSE No quiesce within a reasonable period. This generally means that the device is unplugged. NB This is not a reliable test for "joystick unplugged" This routine can return TRUE under some circumstances even when there is no joystick --*/ { int i; UCHAR PortVal; // // Wait for the stuff to quiesce // for (i = 0; i < ANALOG_POLL_TIMEOUT; i++) { PortVal = READ_PORT_UCHAR(JoyPort); if ((PortVal & Mask) == 0){ return TRUE; } else { KeStallExecutionProcessor(1); } } // // If poll timed out we have an uplugged joystick // DebugTrace(("SidewndrQuiesce failed!")); return FALSE; } NTSTATUS SidewndrMapDevice( DWORD PortBase, DWORD NumberOfPorts, PJOY_EXTENSION pJoyExtension ) { DWORD MemType; PHYSICAL_ADDRESS PortAddress; PHYSICAL_ADDRESS MappedAddress; MemType = 1; // IO space PortAddress.LowPart = PortBase; PortAddress.HighPart = 0; HalTranslateBusAddress( Isa, 0, PortAddress, &MemType, &MappedAddress); if (MemType == 0) { // // Map memory type IO space into our address space // pJoyExtension->DeviceAddress = (PUCHAR) MmMapIoSpace(MappedAddress, NumberOfPorts, FALSE); pJoyExtension->DeviceIsMapped = TRUE; } else { pJoyExtension->DeviceAddress = (PUCHAR) MappedAddress.LowPart; pJoyExtension->DeviceIsMapped = FALSE; } return STATUS_SUCCESS; } DWORD TimeInMicroSeconds( DWORD dwTime ) { DWORD Remainder; return RtlExtendedLargeIntegerDivide( RtlEnlargedUnsignedMultiply( dwTime, 1000000L), Frequency, &Remainder ).LowPart; } DWORD TimeInTicks( DWORD dwTimeInMicroSeconds ) { return (DWORD) (((__int64)dwTimeInMicroSeconds * (__int64)Frequency) / (__int64) 1000000L); } NTSTATUS SidewndrWaitForClockEdge( DWORD edge, BYTE *pByte, PUCHAR JoyPort ) /*++ Routine Description: Waits for the clock line to go high, or low depending on a the supplied parameter (edge). If edge is CLOCK_RISING_EDGE, waits for rising edge, else if edge is CLOCK_FALLING_EDGE An upper bound for the wait duration is set at 1000 iterations. Arguments: edge -- CLOCK_RISING_EDGE or CLOCK_FALLING Edge to specify what to await pByte -- The contents of the device register are returned for other use Return Value: STATUS_SUCCESS -- the specified edge was detected before timeout STATUS_TIMEOUT -- timeout before detecting specified edge. --*/ { DWORD maxTimeout; BYTE joyByte; maxTimeout = nReadLoopMax; if (CLOCK_RISING_EDGE == edge) { while (maxTimeout--) { joyByte = READ_PORT_UCHAR(JoyPort); if (joyByte & CLOCK_BITMASK) { *pByte = joyByte; return STATUS_SUCCESS; } } *pByte = joyByte; return STATUS_TIMEOUT; } else { while (maxTimeout--) { joyByte = READ_PORT_UCHAR(JoyPort); if (!(joyByte & CLOCK_BITMASK)) { *pByte = joyByte; return STATUS_SUCCESS; } } *pByte = joyByte; return STATUS_TIMEOUT; } } NTSTATUS SidewndrReset( PUCHAR JoyPort ) // This resets the joystick to enhanced digital mode. { DWORD dwRetries; NTSTATUS Status; dwRetries = 0; do { ++dwRetries; Status = SidewndrStartAnalogMode(JoyPort); if (Status == STATUS_TIMEOUT) continue; //KeDelayExecutionThread( KernelMode, FALSE, &LI10ms); //MarkSV thinks this is unnecessary Status = SidewndrStartDigitalMode(JoyPort); if (Status == STATUS_TIMEOUT) continue; //KeDelayExecutionThread( KernelMode, FALSE, &LI10ms); //MarkSV thinks this is unnecessary Status = SidewndrStartEnhancedMode(JoyPort); } while ((Status == STATUS_TIMEOUT) && (dwRetries < 10) ); // give the joystick time to stabilize MarkSV thinks this is unnecessary //KeDelayExecutionThread( KernelMode, FALSE, &LI10ms); return Status; } NTSTATUS SidewndrStartAnalogMode( PUCHAR JoyPort ) { KIRQL OldIrql; if(! SidewndrQuiesce(JoyPort, 0x01)) { return STATUS_TIMEOUT; } KeRaiseIrql(DISPATCH_LEVEL, &OldIrql); WRITE_PORT_UCHAR(JoyPort, JOY_START_TIMERS); if (!SidewndrReadWait(JoyPort, X_AXIS_BITMASK)) goto timeout; WRITE_PORT_UCHAR(JoyPort, JOY_START_TIMERS); if (!SidewndrReadWait(JoyPort, X_AXIS_BITMASK)) goto timeout; WRITE_PORT_UCHAR(JoyPort, JOY_START_TIMERS); KeLowerIrql(OldIrql); // // Wait 1ms to let port settle out // KeDelayExecutionThread( KernelMode, FALSE, &LI1ms); // MarkSV says 1 ms is enough, original code had 8 ms return STATUS_SUCCESS; timeout: KeLowerIrql(OldIrql); return STATUS_TIMEOUT; } NTSTATUS SidewndrStartDigitalMode( PUCHAR JoyPort ) { KIRQL OldIrql; DWORD dwStart, dwX0, dwX1, dwX2, dwX3; DebugTrace(("Sidewndr: Digital Mode Requested")); SidewndrQuiesce(JoyPort, 0x01); KeRaiseIrql(DISPATCH_LEVEL, &OldIrql); WRITE_PORT_UCHAR(JoyPort, JOY_START_TIMERS); if (!SidewndrReadWait(JoyPort, X_AXIS_BITMASK)) goto timeout; SidewndrWait (75); WRITE_PORT_UCHAR(JoyPort, JOY_START_TIMERS); if (!SidewndrReadWait(JoyPort, X_AXIS_BITMASK)) goto timeout; SidewndrWait (75 + 726); WRITE_PORT_UCHAR(JoyPort, JOY_START_TIMERS); if (!SidewndrReadWait(JoyPort, X_AXIS_BITMASK)) goto timeout; SidewndrWait (75 + 300); WRITE_PORT_UCHAR(JoyPort, JOY_START_TIMERS); if (!SidewndrReadWait(JoyPort, X_AXIS_BITMASK)) goto timeout; KeLowerIrql(OldIrql); SidewndrQuiesce(JoyPort, 0x01); return STATUS_SUCCESS; timeout: KeLowerIrql(OldIrql); return STATUS_TIMEOUT; } NTSTATUS SidewndrStartEnhancedMode( PUCHAR JoyPort ) { DWORD byteIndex; DWORD bitIndex; BYTE JoyByte; NTSTATUS Status; KIRQL OldIrql; KeRaiseIrql(DISPATCH_LEVEL, &OldIrql); WRITE_PORT_UCHAR(JoyPort, JOY_START_TIMERS); // Wait for serial clock to go high, probably already there. Status = SidewndrWaitForClockEdge(CLOCK_RISING_EDGE, &JoyByte, JoyPort); if (Status != STATUS_SUCCESS) { KeLowerIrql(OldIrql); DebugTrace(("SidewndrStartEnhancedMode: timeout in first spin")); return(STATUS_TIMEOUT); } for (byteIndex = 0; byteIndex < 6; byteIndex++) { for (bitIndex = 0; bitIndex < 8; bitIndex++) { // look for falling edge of serial clock. Status = SidewndrWaitForClockEdge(CLOCK_FALLING_EDGE, &JoyByte, JoyPort); if (Status != STATUS_SUCCESS) { KeLowerIrql(OldIrql); DebugTrace(("SidewndrStartEnhancedMode: timeout in second spin byteIndex %d bitIndex %d", byteIndex, bitIndex)); return(STATUS_TIMEOUT); } // Wait for serial clock to go high. Status = SidewndrWaitForClockEdge(CLOCK_RISING_EDGE, &JoyByte, JoyPort); if (Status != STATUS_SUCCESS) { KeLowerIrql(OldIrql); DebugTrace(("SidewndrStartEnhancedMode: timeout in third spin")); return(STATUS_TIMEOUT); } } } // Interrupt the processor again, telling it to send an ID packet. // After getting the ID packet it knows to go into enhanced mode. // This does not affect the packet currently going. WRITE_PORT_UCHAR(JoyPort, JOY_START_TIMERS); // Wait out the rest of the packet so we can figure out how long this takes. for (byteIndex = 6; byteIndex < 8; byteIndex++) { for (bitIndex = 0; bitIndex < 8; bitIndex++) { // look for falling edge of serial clock. Status = SidewndrWaitForClockEdge(CLOCK_FALLING_EDGE, &JoyByte, JoyPort); if (Status != STATUS_SUCCESS) { KeLowerIrql(OldIrql); DebugTrace(("SidewndrStartEnhancedMode Timeout in 4th spin")); return(STATUS_TIMEOUT); } // Wait for serial clock to go high. Status = SidewndrWaitForClockEdge(CLOCK_RISING_EDGE, &JoyByte, JoyPort); if (Status != STATUS_SUCCESS) { KeLowerIrql(OldIrql); DebugTrace(("SidewndrStartEnhancedMode Timeout in 5th spin")); return(STATUS_TIMEOUT); } } } KeLowerIrql(OldIrql); //m_tmPacketTime = SystemTime() - tmStartTime; // The joystick ID comes across on 20 bytes and we just did 8 bytes, // so wait (with interrupts enabled) long enough for the ID packet to // complete. After that we should be in enhanced mode. Each nibble takes // about 10us, so 1ms should be plenty of time for everything. KeDelayExecutionThread( KernelMode, FALSE, &LI1ms); return(STATUS_SUCCESS); } /*++ ******************************************************************************* Routine: CSidewinder::GetEnhancedPacket Description: If the joystick is in digital enhanced mode, you can call this to get a digital packet and store the data into the class' m_enhancedPacket member variable. Call InterpretEnhancedPacket to turn the raw data into joystick info. Note that while you can get an enhanced packet in 1/3 the time of a normal packet (and can thus turn back on interrputs much sooner), you can not get enhanced packets any faster than you can get normal packets. This function will check to make sure sufficient time has passed since the last time it was called and if it hasn't it will wait (with interrupts ENABLED) until that is true before asking for another packet. This assumes the joystick is in digital enhanced mode and there is no way to tell if this is not the case. If the joystick is just in digital (non-enhanced) mode then this will return successfully. However, the checksum and/or sync bits will not be correct. Arguments: None. Return Value: successful if it worked. not_digital_mode if the joystick is not in digital mode. ******************************************************************************* --*/ NTSTATUS SidewndrGetEnhancedPacket( PUCHAR JoyPort ) { KIRQL OldIrql; DWORD byteIndex; BYTE joyByte; BYTE masks[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 }; NTSTATUS Status; // While enhanced packets come across faster than normal packets, // they can not be called any more frequently. This makes sure // we've let enough time since the last packet go by before calling // for another. KeRaiseIrql(DISPATCH_LEVEL, &OldIrql); // This great and sensitive irql stuff is useless since the spinlock stuff WAY up high puts us a dispatch // Start the retrieval operation WRITE_PORT_UCHAR(JoyPort, 0); // Wait for serial clock to go high, probably already there. Status = SidewndrWaitForClockEdge(CLOCK_RISING_EDGE, &joyByte, JoyPort); if (Status != STATUS_SUCCESS) { KeLowerIrql(OldIrql); return(STATUS_TIMEOUT); } for (byteIndex = 0; byteIndex < 21; byteIndex++) { // look for falling edge of serial clock. Status = SidewndrWaitForClockEdge(CLOCK_FALLING_EDGE, &joyByte, JoyPort); if (Status != STATUS_SUCCESS) { KeLowerIrql(OldIrql); return(STATUS_TIMEOUT); } // Wait for serial clock to go high. Status = SidewndrWaitForClockEdge(CLOCK_RISING_EDGE, &joyByte, JoyPort); if (Status != STATUS_SUCCESS) { KeLowerIrql(OldIrql); return(STATUS_TIMEOUT); } EnhancedPacket[byteIndex] = (joyByte & ALLDATA_BITMASK) >> 5; } KeLowerIrql(OldIrql); // NB, the joystick will still send 66 packets even though we only needed the first // 21 of them. Don't attempt to poll the joystick until it's finished. This is another // reason to require a minimum time between polls. (About 500us will be enough.) return(STATUS_SUCCESS); } /*++ ******************************************************************************* Routine: CSidewinder::InterpretEnhancedPacket Description: Call this after getting an enhanced packet. It converts the raw data into normal joystick data, filling out the class' m_data structure. The encoding of the raw Data bits (D1-D3) is given below. Data packet format for Enhanced Mode transmission (4 line) Byte D3 D2 D1 D0 0 Y9 Y8 Y7 SCLK 1 X9 X8 X7 SCLK 2 B0 1 H3 SCLK 3 B3 B2 B1 SCLK 4 B6 B5 B4 SCLK 5 X1 X0 0 SCLK 6 X4 X3 X2 SCLK 7 0 X6 X5 SCLK 8 Y2 Y1 Y0 SCLK 9 Y5 Y4 Y3 SCLK 10 T7 0 Y6 SCLK 11 R7 T9 T8 SCLK 12 B7 CH/TM R8 SCLK 13 R1 R0 0 SCLK 14 R4 R3 R2 SCLK 15 0 R6 R5 SCLK 16 T2 T1 T0 SCLK 17 T5 T4 T3 SCLK 18 CHKSUM0 0 T6 SCLK 19 CHKSUM3 CHKSUM2 CHKSUM1 SCLK 20 H2 H1 H0 SCLK 21 0 0 0 SCLK Arguments: None. Return Value: successful if the data was valid. bad_packet if either the checksum or sync bits were incorrect. ******************************************************************************* --*/ NTSTATUS SidewndrInterpretEnhancedPacket( PJOY_DD_INPUT_DATA pInput ) { WORD temp16; BYTE temp8; BYTE checksum; pInput->Unplugged = FALSE; pInput->Mode = SIDEWINDER3P_ENHANCED_DIGITAL_MODE; //Get xOffset. temp16 = 0x0000; temp16 |= (EnhancedPacket[1] & 0x07) << 7; temp16 |= (EnhancedPacket[7] & 0x03) << 5; temp16 |= (EnhancedPacket[6] & 0x07) << 2; temp16 |= (EnhancedPacket[5] & 0x06) >> 1; pInput->u.DigitalData.XOffset = temp16; //Get yOffset. temp16 = 0x0000; temp16 |= (EnhancedPacket[0] & 0x07) << 7; temp16 |= (EnhancedPacket[10] & 0x01) << 6; temp16 |= (EnhancedPacket[9] & 0x07) << 3; temp16 |= (EnhancedPacket[5] & 0x07); pInput->u.DigitalData.YOffset = temp16; //Get rzOffset: Only 9 bits (others are 10) temp16 = 0x0000; temp16 |= (EnhancedPacket[12] & 0x01) << 8; temp16 |= (EnhancedPacket[11] & 0x04) << 5; temp16 |= (EnhancedPacket[15] & 0x03) << 5; temp16 |= (EnhancedPacket[14] & 0x07) << 2; temp16 |= (EnhancedPacket[13] & 0x06) >> 1; pInput->u.DigitalData.RzOffset = temp16; //Get tOffset. temp16 = 0x0000; temp16 |= (EnhancedPacket[11] & 0x03) << 8; temp16 |= (EnhancedPacket[10] & 0x04) << 5; temp16 |= (EnhancedPacket[18] & 0x01) << 6; temp16 |= (EnhancedPacket[17] & 0x07) << 3; temp16 |= (EnhancedPacket[16] & 0x07); pInput->u.DigitalData.TOffset = temp16; //Get Hat temp8 = 0x00; temp8 |= (EnhancedPacket[2] & 0x01) << 3; temp8 |= (EnhancedPacket[20] & 0x07); pInput->u.DigitalData.Hat = temp8; //Get Buttons temp8 = 0x00; temp8 |= (EnhancedPacket[2] & 0x04) >> 2; temp8 |= (EnhancedPacket[3] & 0x07) << 1; temp8 |= (EnhancedPacket[4] & 0x07) << 4; temp8 |= (EnhancedPacket[12] & 0x04) << 5; temp8 = ~temp8; // Buttons are 1 = off, 0 = on. Want the opposite. pInput->u.DigitalData.Buttons = temp8; // Get CH/TM switch. pInput->u.DigitalData.Switch_CH_TM = ((EnhancedPacket[12] & 0x02) == 0) ? 1 : 2; // Get Checksum temp8 = 0x00; temp8 |= (EnhancedPacket[18] & 0x04) >> 2; temp8 |= (EnhancedPacket[19] & 0x07) << 1; pInput->u.DigitalData.Checksum = temp8; // // Check the checksum. Because the enhance mode retrieves the data packet // 3 bits at a time, the data is not in the same order that it arrives in // in the normal mode. Thus, calculating the checksum requires additional // manipulation. // checksum = pInput->u.DigitalData.Checksum; checksum += 0x08 | ((EnhancedPacket[2] & 0x01) << 2) | ((EnhancedPacket[1] & 0x06) >> 1); checksum += ((EnhancedPacket[1] & 0x01) << 3) | (EnhancedPacket[0] & 0x07); checksum += (EnhancedPacket[4] & 0x07); checksum += ((EnhancedPacket[3] & 0x07) << 1) | ((EnhancedPacket[2] & 0x04) >> 2); checksum += ((EnhancedPacket[7] & 0x03) << 1) | ((EnhancedPacket[6] & 0x04) >> 2); checksum += ((EnhancedPacket[6] & 0x03) << 2) | ((EnhancedPacket[5] & 0x06) >> 1); checksum += ((EnhancedPacket[10] & 0x01) << 2) | ((EnhancedPacket[9] & 0x06) >> 1); checksum += ((EnhancedPacket[9] & 0x01) << 3) | (EnhancedPacket[8] & 0x07); checksum += (EnhancedPacket[12] & 0x07); checksum += ((EnhancedPacket[11] & 0x07) << 1) | ((EnhancedPacket[10] & 0x04) >> 2); checksum += ((EnhancedPacket[15] & 0x03) << 1) | ((EnhancedPacket[14] & 0x04) >> 2); checksum += ((EnhancedPacket[14] & 0x03) << 2) | ((EnhancedPacket[13] & 0x06) >> 1); checksum += ((EnhancedPacket[18] & 0x01) << 2) | ((EnhancedPacket[17] & 0x06) >> 1); checksum += ((EnhancedPacket[17] & 0x01) << 3) | (EnhancedPacket[16] & 0x07); checksum += (EnhancedPacket[20] & 0x07); checksum &= 0x0F; if (checksum == 0) { pInput->u.DigitalData.fChecksumCorrect = TRUE; } else { pInput->u.DigitalData.fChecksumCorrect = FALSE; DebugTrace(("Enhanced packet checksum failed.\n")); } // // Check SyncBits // if ((EnhancedPacket[2] & 0x02) != 0) { checksum = (EnhancedPacket[5] & 0x01) + (EnhancedPacket[7] & 0x04) + (EnhancedPacket[10] & 0x02) + (EnhancedPacket[13] & 0x01) + (EnhancedPacket[15] & 0x04) + (EnhancedPacket[18] & 0x02); if (checksum == 0) { pInput->u.DigitalData.fSyncBitsCorrect = TRUE; } else { pInput->u.DigitalData.fSyncBitsCorrect = FALSE; DebugTrace(("Enhanced packet sync bits incorrect.\n")); } } else { pInput->u.DigitalData.fSyncBitsCorrect = FALSE; } if (pInput->u.DigitalData.fChecksumCorrect == TRUE && pInput->u.DigitalData.fSyncBitsCorrect == TRUE) { // everything worked, save this info as last good packet RtlCopyMemory (&jjLastGoodPacket, pInput, sizeof (JOY_DD_INPUT_DATA)); bLastGoodPacket = TRUE; return(STATUS_SUCCESS); } else { return(STATUS_TIMEOUT); } } int lstrnicmpW (LPWSTR pszA, LPWSTR pszB, size_t cch) { if (!pszA || !pszB) { return (!pszB) - (!pszA); // A,!B:1, !A,B:-1, !A,!B:0 } // while (cch--) for ( ; cch > 0; cch--, pszA++, pszB++) // previous version did not increment string pointers [SteveZ] { if (!*pszA || !*pszB) { return (!*pszB) - (!*pszA); // A,!B:1, !A,B:-1, !A,!B:0 } if (*pszA != *pszB) { return (int)(*pszA) - (int)(*pszB); // -1:AB } } return 0; // no differences before told to stop comparing, so A==B } VOID SidewndrWait ( DWORD TotalWait // in uS ) /*++ Routine Description: This routine waits for the specified number of microseconds. Tolerances for the joystick are smaller than NT typically provide, so all timing is isolated into this routine, where we can do crude things and play nasty hacks as necessary. This routine locks up the cpu, so only use it for putting the joystick into digital mode. Arguments: TotalWait - time to wait in microseconds --*/ { DWORD ulStartTime, ulEndTime; int nTicks; // dwQPCLatency is the calibrated-for-this-machine latency for a call to KeQueryPerfomanceCounter (in uS). nTicks = TimeInTicks (TotalWait - dwQPCLatency); if (nTicks <= 0) return; ulStartTime = KeQueryPerformanceCounter(NULL).LowPart; ulEndTime = ulStartTime + nTicks; while (KeQueryPerformanceCounter(NULL).LowPart < ulEndTime) { ; } } BOOL SidewndrReadWait ( PUCHAR JoyPort, UCHAR Mask ) { /*++ read a port and wait until it gives correct answer based on mask. timeout after nReadLoopMax iterations (about 2 mS). --*/ int i; for (i = 0; i < nReadLoopMax; i++) { if ( ! (READ_PORT_UCHAR(JoyPort) & Mask) ) return TRUE; // port went high } return FALSE; // timed out } void SidewndrGetConfig ( LPJOYREGHWCONFIG pConfig, PJOY_EXTENSION pJoyExtension ) /*++ Routine Description: This routine is called in response to the IOCTL_JOY_GET_JOYREGHWCONFIG query. It fills out a JOYREGHWCONFIG structure with relevant information about the given joystick. Arguments: pConfig - Specifies a JOYREGHWCONFIG structure, to be filled in pJoyExtension - Specifies the joystick to query Return Value: void --*/ { pConfig->hws.dwNumButtons = 4; switch (pJoyExtension->CurrentDeviceMode) { case SIDEWINDER3P_ANALOG_MODE: { pConfig->hws.dwFlags = JOY_HWS_HASPOV | JOY_HWS_POVISBUTTONCOMBOS | JOY_HWS_HASU | JOY_HWS_HASR; pConfig->dwUsageSettings = JOY_US_HASRUDDER | JOY_US_PRESENT | JOY_US_ISOEM; pConfig->hwv.jrvHardware.jpMin.dwX = 20; pConfig->hwv.jrvHardware.jpMin.dwY = 20; pConfig->hwv.jrvHardware.jpMin.dwZ = 0; pConfig->hwv.jrvHardware.jpMin.dwR = 20; pConfig->hwv.jrvHardware.jpMin.dwU = 20; pConfig->hwv.jrvHardware.jpMin.dwV = 0; pConfig->hwv.jrvHardware.jpMax.dwX = 1600; pConfig->hwv.jrvHardware.jpMax.dwY = 1600; pConfig->hwv.jrvHardware.jpMax.dwZ = 0; pConfig->hwv.jrvHardware.jpMax.dwR = 1600; pConfig->hwv.jrvHardware.jpMax.dwU = 1600; pConfig->hwv.jrvHardware.jpMax.dwV = 0; pConfig->hwv.jrvHardware.jpCenter.dwX = 790; pConfig->hwv.jrvHardware.jpCenter.dwY = 790; pConfig->hwv.jrvHardware.jpCenter.dwZ = 0; pConfig->hwv.jrvHardware.jpCenter.dwR = 790; pConfig->hwv.jrvHardware.jpCenter.dwU = 790; pConfig->hwv.jrvHardware.jpCenter.dwV = 0; break; } default: case SIDEWINDER3P_DIGITAL_MODE: case SIDEWINDER3P_ENHANCED_DIGITAL_MODE: { pConfig->hws.dwFlags = JOY_HWS_HASPOV | JOY_HWS_POVISBUTTONCOMBOS | JOY_HWS_HASU | JOY_HWS_HASR; pConfig->dwUsageSettings = JOY_US_HASRUDDER | JOY_US_PRESENT | JOY_US_ISOEM; pConfig->hwv.jrvHardware.jpMin.dwX = 0; pConfig->hwv.jrvHardware.jpMin.dwY = 0; pConfig->hwv.jrvHardware.jpMin.dwZ = 0; pConfig->hwv.jrvHardware.jpMin.dwR = 0; pConfig->hwv.jrvHardware.jpMin.dwU = 0; pConfig->hwv.jrvHardware.jpMin.dwV = 0; pConfig->hwv.jrvHardware.jpMax.dwX = 1024; pConfig->hwv.jrvHardware.jpMax.dwY = 1024; pConfig->hwv.jrvHardware.jpMax.dwZ = 0; pConfig->hwv.jrvHardware.jpMax.dwR = 512; pConfig->hwv.jrvHardware.jpMax.dwU = 1024; pConfig->hwv.jrvHardware.jpMax.dwV = 0; pConfig->hwv.jrvHardware.jpCenter.dwX = 512; pConfig->hwv.jrvHardware.jpCenter.dwY = 512; pConfig->hwv.jrvHardware.jpCenter.dwZ = 0; pConfig->hwv.jrvHardware.jpCenter.dwR = 256; pConfig->hwv.jrvHardware.jpCenter.dwU = 512; pConfig->hwv.jrvHardware.jpCenter.dwV = 0; break; } } pConfig->hwv.dwCalFlags = JOY_ISCAL_POV; pConfig->dwType = JOY_HW_3A_4B_GENERIC; pConfig->dwReserved = 0; }