********************************************************************** Running Setup for Microsoft Whistler Datacenter Server Release Notes, Part 3 of 4 Beta 2 ********************************************************************** (c) 2001 Microsoft Corporation. All rights reserved. These notes support a preliminary release of a software program that bears the project code name Whistler. This part of the text file series explains how to set up Whistler Datacenter Server. For background information that will help you make appropriate choices during Setup, see the earlier sections of the text file series. In this section of the text file series: 1.0 Preparing Your System for Installation 2.0 Starting Setup on an x86-based Computer 3.0 Starting Setup on an Itanium-based Computer 4.0 Planning for Unattended Setup 5.0 Entering Server Settings During Installation 6.0 Configuring Your Server ====================================================================== 1.0 Preparing Your System for Installation ====================================================================== This topic describes the basic steps to take to prepare your server for a new installation. If you are installing Datacenter Server on server cluster nodes, be sure to read Datactr4.txt, "Upgrading and Installing on Cluster Nodes." 1.1 Checking the System Log for Errors ====================================================================== If the computer already has a working operating system, review the system log for recent or recurring errors (especially hardware errors) that could cause problems during the installation. For information about viewing event logs, see Whistler Help and Support Services for the operating system on your computer. 1.2 Backing Up Files ====================================================================== Before you install Whistler Datacenter Server, you should back up your current files, unless the computer has no files or the current operating system files have been damaged. You can back up files to a variety of different media, such as tape drives or the hard disks of other computers on the network. 1.3 Disconnecting UPS Devices ====================================================================== If you have an uninterruptible power supply (UPS) connected to your target computer, disconnect the connecting serial cable before running Setup. Whistler Setup attempts to automatically detect devices connected to serial ports, and UPS equipment can cause problems with the detection process. ====================================================================== 2.0 Starting Setup on an x86-based Computer ====================================================================== This section explains how to start Setup on an x86-based computer. For an explanation of how to start Setup on an Itanium-based computer, see "Starting Setup on an Itanium-based Computer," later in this text file series. After you start Setup, it works in several stages, prompting you for information, copying files, and restarting. Setup concludes with the Configure Your Server Wizard, which you can use to adjust the server configuration for your specific needs. Full online help (called Help and Support Services) is available when the Configure Your Server Wizard appears. To open Help and Support Services, click Start, and then click Help and Support. 2.1 Providing a Mass Storage Driver or a HAL File ====================================================================== If you have a mass storage controller that requires a driver supplied by the manufacturer, or if you have a custom Hardware Abstraction Layer (HAL) file supplied by the manufacturer, you will need to provide the appropriate driver file or HAL file during Setup. 2.1.1 Mass Storage Drivers and the Setup Process ---------------------------------------------------------------------- If you have a mass storage controller (such as a SCSI, RAID, or Fibre Channel adapter) for your hard disk, see if the controller is on the Hardware Compatibility List (HCL) that was released with the software, that is, Hcl.txt in the Support folder on the Whistler Datacenter Server CD. This file (as contrasted with the updated HCL at http://www.microsoft.com) lists only the devices for which drivers are included on the Whistler Datacenter Server CD. If your controller is not listed in the HCL on the CD, but the manufacturer has supplied a separate driver file for use with Whistler, locate the CD or other medium containing the file before beginning Setup. During the early part of Setup, a line at the bottom of the screen will prompt you to press F6. Further prompts will guide you in supplying the driver file to Setup so that it can gain access to the mass storage controller. If you are not sure if your mass storage controller is supported, you can try running Setup. If the controller is not supported, an error message will indicate a problem with an inaccessible boot device. 2.1.2 Using a Custom Hardware Abstraction Layer (HAL) File ---------------------------------------------------------------------- If you have a custom Hardware Abstraction Layer (HAL) file supplied by your computer manufacturer, before beginning Setup, locate the CD or other medium containing the file. During the early part of Setup, a line at the bottom of the screen will prompt you to press F6. At this time, do not press F6. Press F5 instead. After you press F5, follow the instructions that appear. In this way, you can include your HAL file in the Setup process. 2.2 Starting Setup on an x86-based Computer ====================================================================== You can start Setup from a CD or from a network. For information about unattended Setup and other options available when starting Setup, see "Planning for Unattended Setup" later in this text file series. 2.2.1 Starting from a CD ---------------------------------------------------------------------- If you use the Microsoft Whistler CD for running Setup, you have several options for starting Setup. >>> To start setup from the CD: 1. Insert the CD in the drive, and wait for Setup to start. 2. Follow the instructions that appear. Another way of using the Setup CD is to start the computer from the CD-ROM drive. Using this method, you can perform a new installation on A computer that does not have an operating system, although you can Also use this method on computers that have operating systems. >>> To start Setup for a new installation by starting an x86-based computer from the CD: 1. With the computer turned off, insert the CD in the CD-ROM drive. 2. Start the computer and wait for Setup to start. 3. Follow the instructions that appear. 2.2.2 Starting Setup from a Network ---------------------------------------------------------------------- To install Whistler from a network, you share the files either directly from the CD or copy them to a shared folder. Then, you start the appropriate program to run Setup. >>> To install Whistler from a network (x86-based computers only): 1. On a network server, share the installation files, either by inserting the CD and sharing the CD-ROM drive or by copying the files from the I386 folder on the CD to a shared folder. 2. On the computer on which you want to install Whistler, connect to the shared Setup files: * If you are sharing the CD-ROM drive, connect to the shared drive and change to the I386 folder. * If you are sharing a folder, connect to that folder. 3. Run Winnt32.exe. 4. Follow the instructions that appear. ====================================================================== 3.0 Starting Setup on an Itanium-based Computer ====================================================================== This section explains how to start Setup on an Itanium-based computer. For an explanation of how to start Setup on an x86-based computer, see "Starting Setup on an x86-based Computer" earlier in this text file series. Important: Itanium-based computers require a minimum 100-MB FAT Partition for the operation of the Extensible Firmware Interface (EFI). This EFI system partition stores programs and information files that EFI uses to start the operating system. Do not delete or reformat this partition. Whistler supports a new partition style called GUID partition table (GPT), which is available only in the Itanium-based editions of Whistler. The installation partition on an Itanium-based computer must be GPT. You can still read and write to Master Boot Record (MBR) volumes, which are common to most computers, but you cannot install on one. Dynamic MBR disks can be accessed by x86-based computers and Itanium-based computers running Windows 2000 or Whistler only. Dynamic GPT disks can be accessed only by Itanium-based computers running the Itanium editions of Whistler. >>> To start Setup on an Itanium-based computer: 1. With the computer turned off, insert the Setup CD in the CD-ROM drive. 2. Start the computer, and then press any key. 3. Follow the instructions that appear. ====================================================================== 4.0 Planning for Unattended Setup ====================================================================== This section provides general information about unattended Setup. For detailed instructions about running unattended Setup (also called automated installation), see the "Microsoft Windows 2000 Resource Kit, Deployment Planning Guide." To simplify the process of setting up Whistler on multiple computers, you can run Setup unattended. To do this, create and use an answer file, a customized script that answers the Setup questions automatically. Then, run Setup from the command line; that is, run Winnt32.exe or Winnt.exe with the appropriate options for unattended Setup. Choose the command according to the operating system that is running when you start unattended Setup: * To start unattended Setup on a computer running MS-DOS or Windows 3.x, run Winnt.exe (with the appropriate options selected). * To start unattended Setup on a computer running Windows NT, Windows 95, Windows 98, Windows Millennium Edition, or Windows 2000, run Winnt32.exe (with the appropriate options selected). To learn about unattended Setup, see the following sources: * For detailed instructions on running unattended Setup (also called automated installation), see the "Microsoft Windows 2000 Resource Kit, Deployment Planning Guide." * To view the command options available for Winnt.exe, on a computer running Windows 3.x or MS-DOS, insert the Whistler Setup CD in the CD-ROM drive and display the command prompt. Then, change to the CD-ROM drive, change to the I386 directory, and type winnt /? * To view the command options available for Winnt32.exe, on a computer running Windows 95, Windows 98, Windows Millennium Edition, Windows NT, Windows 2000, or Whistler, insert the Whistler Setup CD in the CD-ROM drive and display the command prompt (click Start, click Run, and then type cmd). Then, change to the CD drive, change to the I386 directory, and type winnt32 /? ====================================================================== 5.0 Entering Server Settings During Installation ====================================================================== After you start Setup, a process begins in which necessary Setup files are copied to the disk. During this process, Setup displays dialog boxes you can use to select various options. The following sections outline the items you will be specifying as you run Setup. Before working with these sections, see earlier sections in this text file series for important background information about issues such as partitions, file system choices, and the handling of TCP/IP name resolution. You can modify settings after running Setup by using the Configure Your Server Wizard or other configuration tools. Note: If you have a mass storage controller (such as a SCSI, RAID, or Fibre Channel adapter) for your hard disk, see "Providing a Mass Storage Driver or a HAL File" earlier in this text file. If you have specialized hardware requiring a custom Hardware Abstraction Layer (HAL) file supplied by your computer manufacturer, see "Using a Custom Hardware Abstraction Layer (HAL) File" earlier in this text file. 5.1 Choosing or Creating a Partition for Whistler ====================================================================== During installation, you can create or specify a partition on which you want to install Whistler. You can create a partition from the unpartitioned space available, specify an existing partition, or delete an existing partition to create more unpartitioned disk space for the Whistler partition. If you specify any action that will cause information to be erased, you will be prompted to confirm your choice. For more information, see "Planning Disk Partitions" earlier in this text file series. Important: If you delete an existing partition, you will cause any data on that partition to be erased. Installing Whistler on a partition that contains another operating system will cause that operating system to be overwritten. 5.2 Selecting Regional Settings ====================================================================== Use this screen to customize language and locale settings. You can set up Whistler to use multiple languages and regional settings. 5.3 Personalizing Whistler Datacenter Server ====================================================================== Enter your name and, optionally, your organization. 5.4 Specifying a Licensing Mode ====================================================================== Select your client licensing mode. For information about licensing modes, see "Choosing a Licensing Mode" in Datactr1.txt. If you are unsure which mode to use, choose Per Server because you can change once from Per Server to Per Seat at no cost. 5.5 Entering Your Computer Name ====================================================================== Enter a computer name. The recommended length for most languages is 15 characters or less. For languages that require more storage space per character, such as Chinese, Japanese, and Korean, the recommended length is 7 characters or fewer. You should use only Internet-standard characters in the computer name. The standard characters are the numbers 0 to 9, uppercase and lowercase letters from A to Z, and the hyphen (-) character. If you are using the Microsoft DNS Service on your network, you can use a wider variety of characters, including Unicode characters and other nonstandard characters such as the ampersand (&). Using nonstandard characters might impact the interoperability of network software from other companies. For more information about DNS, see "Name Resolution for TCP/IP" earlier in this text file series. The maximum length for a computer name is 63 bytes. If the name is longer than 15 bytes (15 characters in most languages, 7 characters in some), computers running operating systems developed before Windows 2000 will recognize this computer by the first 15 bytes of the name only. If this computer will be part of a domain, you must choose a computer name different from any other computer in the domain. If this computer will contain multiple Whistler Datacenter Server installations, each installation must be on a separate partition and must have a unique computer name. 5.5.1 Setting the Administrator Account Password ---------------------------------------------------------------------- Setup creates a user account on your computer called Administrator that has administrative privileges for managing your computer's overall configuration. The Administrator account is intended for the person who manages this computer. For security reasons, you should specify a password for the Administrator account. Leaving the Administrator password box empty indicates no password for the account. The password can have up to 127 characters. For the strongest system security, use a password of at least 7 characters and use a mixture of uppercase and lowercase letters, numbers, and other characters such as *, ?, or $. Important: For security reasons, you should assign a strong password to the Administrator account. The password you type in the Confirm password box must exactly match The password you type in Administrator password box. Take special care To remember and protect your password. After Setup is completed, for the highest security, change the name of the Administrator account (it cannot be deleted) and keep a strong password on the account at all times. For more information about security and the privileges held by the Administrator account and the Administrators group, see Whistler Help and Support Services. To open Help and Support Services, after completing Setup, click Start, and then click Help and Support. 5.5.2 Choosing Server Components ---------------------------------------------------------------------- You can choose among certain components that will make up your server installation. For information about determining which components you need, see "Choosing Components to Install" earlier in this text file series. Components often needed on networks using TCP/IP include DHCP, DNS, and WINS. To install these components, during Setup, in the Windows Components dialog box, select Networking Services, click Details, and then select the component or components you need. If you complete Setup and then decide you need other components, you can add the necessary components later. There are two ways to do this: * Use the Configure Your Server Wizard. This wizard appears automatically when Setup is complete. You can also start this wizard at any time by using the following steps: click Start, point to Programs, point to Administrative Tools, and then click Configure Your Server. With this wizard, you can install appropriate sets of components for domain controllers or member servers, including file servers, print servers, Web and streaming media servers, application servers, Microsoft SharePoint servers, and networking and communications servers. * Use the Windows Components Wizard. To use this wizard, after running Setup, click Start, point to Settings, and then click Control Panel. In Control Panel, double-click Add or Remove Programs, and then click Add/Remove Windows Components (on the left). With this wizard, you can choose and install individual components. 5.5.3 Setting the Date and Time ---------------------------------------------------------------------- Set the date, time, and time zone, and choose whether the system should automatically adjust for daylight saving time. 5.5.4 Specifying Networking Settings ---------------------------------------------------------------------- You can specify networking information (for TCP/IP or other protocols) during Setup, or you can use the Typical settings option and then make any necessary changes to your networking configuration after installation by using the Configure Your Server Wizard or other management tools. (For information about using protocols other than TCP/IP, read the documentation for your network adapter.) In Setup, you have three choices regarding IP addresses. For important background information about these choices, see "IP Addresses" earlier in this text file series. To assign IP addresses, you can: * Use the Whistler Datacenter Server feature called Automatic Private IP Addressing (APIPA) to automatically assign IP addresses. You can allow Whistler to provide IP addresses automatically during Setup and then, after Setup, change your configuration to use DHCP, static addressing, or both. To open Whistler Help and Support Services (which includes information about DHCP and static IP addresses), after completing Setup, click Start, and then click Help and Support. * Provide for IP addresses to be dynamically assigned in your domain by installing and configuring DHCP on a server to which you assign a static IP address. If you are not familiar with DHCP or the possible choices for a static IP address and its associated subnet mask, you should use APIPA, at least initially, as described in the previous paragraph. * Assign a static IP address to one or more servers. You must assign a server a static IP address if it will provide access to users on the Internet. For important information about obtaining an IP address, see "IP Addresses" earlier in this text file series. In addition, during Setup, you can provide the local server with the IP addresses of any DNS or WINS servers on your network. >>> To allow Setup to assign or obtain an IP address: * In Setup, in the Networking Settings dialog box, click Typical settings. Whistler Setup checks to see if there is a DHCP server in your domain. If there is a DHCP server in your domain, the server provides the IP address. If there is no DHCP server in your domain, Automatic Private IP Addressing (APIPA) assigns an IP address. >>> To specify a static local IP address and settings needed for DNS and WINS: 1. In Setup, in the Networking Settings dialog box, click Custom settings. 2. In the Networking Components dialog box, click Internet Protocol (TCP/IP). 3. Click Properties. 4. In the Internet Protocol (TCP/IP) Properties dialog box, click Use the following IP address. 5. In IP address and Subnet mask, type the appropriate numbers (if appropriate, specify the Default gateway as well). 6. Under Use the following DNS server addresses, type the address of a preferred DNS server and, optionally, an alternate DNS server. If the local server is the preferred or alternate DNS server, type the same IP address as assigned in the previous step. 7. If you will use a WINS server, click Advanced, and then click the WINS tab of the Advanced TCP/IP Settings dialog box to add the IP address of one or more WINS servers. If the local server is a WINS server, type the IP address assigned in step 5. 8. Click OK in each dialog box, and continue through Setup. 5.5.5 Specifying the Workgroup or Domain Name ---------------------------------------------------------------------- A domain is a grouping of accounts and network resources under a single domain name and security boundary. A workgroup is a more basic grouping, intended only to help users find such things as printers and shared folders within that group. You will need to choose between workgroup and domain, and then specify a name for your workgroup or domain. For more information, see "Deciding Between Workgroups and Domains" earlier in this text file series. ====================================================================== 6.0 Configuring Your Server ====================================================================== When Setup completes the installation of Whistler, the computer restarts. Setup has now performed the basic installation. The Configure Your Server Wizard, which will appear on the screen if you log on as the Administrator, makes further configuration easy. At this point, you can register your copy of Whistler Datacenter Server and use Configure Your Server. Also at this point, you can open Whistler Help and Support Services by clicking Start, and then clicking Help and Support. If you have used Windows NT in the past, one of the features you might find useful in Whistler Help and Support is New ways to do familiar tasks, available in the Help topics or by using Search in Help and Support Services. You can use the Configure Your Server Wizard to finish installing optional components that you choose during Setup. With this wizard, you can configure domain controllers or member servers, including file servers, print servers, Web and streaming media servers, application servers, Microsoft SharePoint servers, and networking and communications servers. You can start the Configure Your Server Wizard at any time by clicking Start, pointing to Programs, pointing to Administrative Tools, and then clicking Configure Your Server. Other configuration tools are also available from Administrative Tools. (continued in Datactr4.txt)