#if 0

  This file is organized into two main blocks. The first block contains
    code (non-string) sections which are specific to languages. Please put
    the code sections in the correct language.
  The second block is reserved for [Strings] which localizers will be
    working with. It is further divided using "#if LANGUAGE ==" for language
    specific strings. For strings which are common to all languages
    place outside the #ifs.

  This file is first precompiled with LANGUAGE_ID
  set to the language (see inf\win4\inf\makefile.inc for details).
  For example, for usa builds, the sections under #if LANGUAGE == 0x409
  will appear.

  Important: To support locstudio, this file contains only ONE [Strings] section.

#endif

#if LANGUAGE_ID != 0x804 && LANGUAGE_ID != 0x404 && LANGUAGE_ID != 0x411 &&  LANGUAGE_ID != 0x412
// This section is for non-FE (chs,cht,jpn,kor) builds. So english, german, ...
#elif LANGUAGE_ID == 0x804
//CHS specific sections
#elif LANGUAGE_ID == 0x404
//CHT specific sections
#elif LANGUAGE_ID == 0x411
//JPN specific sections
#elif LANGUAGE_ID == 0x412
//KOR specific sections
#endif

// String section below for localizers
[Strings]

#if LANGUAGE_ID != 0x804 && LANGUAGE_ID != 0x404 && LANGUAGE_ID != 0x411 && LANGUAGE_ID != 0x412

#elif LANGUAGE_ID == 0x804

#elif LANGUAGE_ID == 0x404

#elif LANGUAGE_ID == 0x411

#elif LANGUAGE_ID == 0x412
#endif

Msft = "Microsoft"
SCSIClassName="SCSI- og RAID-controllere"

ADP = "Adaptec"
aha154x.DeviceDesc  = "Adaptec AHA-154x/AHA-164x SCSI-værtskort (ikke-PnP)"
sparrow.DeviceDesc  = "Adaptec AHA-151X/AHA-152X eller AIC-6260/AIC-6360 SCSI-værtskort (ikke-PnP)"

COMPAQ = "Compaq"
cpqarray.DeviceDesc = "Compaq Drive Array (ikke-PnP)"
cpqfcalm.DeviceDesc = "Compaq Fibre-Channel-værtscontroller (ikke-PnP)"

MYLEX = "Mylex"
dac960.DeviceDesc = "Mylex DAC960 Disk Array-controller (ikke-PnP)"

UNSUP = "UNSUP"
buslogic.DeviceDesc = "BusLogic SCSI-værtskort"
*BUS0042.DeviceDesc = "BusLogic MultiMaster SCSI-værtskort"
PCI\VEN_104B&DEV_1040.DeviceDesc = "BusLogic MultiMaster PCI SCSI-værtskort"
flashpnt.DeviceDesc = "BusLogic FlashPoint PCI SCSI-værtskort"
fireport.DeviceDesc = "Diamond Multimedia Systems SCSI-værtskort"
cpqfws2e.DeviceDesc = "Compaq 32-Bit Fast-Wide SCSI-2/E-controller"
fd16_700.DeviceDesc = "Adaptec AHA-2920 eller Future Domain 16XX/PCI/SCSI2Go SCSI-værtskort"
FD16ISA = "Future Domain TMC-1650/1660/1670/1680 SCSI-værtskort"
FD16MCA = "Future Domain MCS-600/700 SCSI-værtskort"
FD16PCMCIANEW = "Future Domain SCSI2Go PCMCIA SCSI-værtskort"
FD16PCI = "Future Domain PCI SCSI-værtskort"
aha2920.DeviceDesc  = "Adaptec AHA-2920 SCSI-værtskort"
ncrc710.DeviceDesc  = "NCR 53C710 SCSI-værtskort"
detected_buslogic.DeviceDesc = "BusLogic SCSI-værtskort (ikke-PnP)"
detected_cpqfws2e.DeviceDesc = "Compaq 32-Bit Fast-Wide SCSI-2/E-controller (ikke-PnP)"
detected_fd16_700.DeviceDesc = "Adaptec AHA-2920 eller Future Domain 16XX/PCI/SCSI2Go SCSI-værtskort"
detected_ncrc710.DeviceDesc = "NCR 710 SCSI-værtskort (ikke-PnP)"
PCI\VEN_1103&DEV_0004&SUBSYS_00051103&REV_03.DeviceDesc = "HPT370 UDMA/ATA100 RAID-controller"
PCI\VEN_1103&DEV_0004&SUBSYS_00011103&REV_03.DeviceDesc = "HPT370 UDMA/ATA100 RAID-controller"
PCI\VEN_1103&DEV_0004&SUBSYS_00011103&REV_04.DeviceDesc = "HPT370 UDMA/ATA100 RAID-controller"

;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START     = 0
SERVICE_ERROR_NORMAL   = 1
REG_EXPAND_SZ          = 0x00020000
REG_DWORD              = 0x00010001