/*++ BUILD Version: 0002 // Increment this if a change has global effects Copyright (c) 1991-1995 Microsoft Corporation Module Name: lmerrlog.h Abstract: This module defines the API function prototypes and data structures for the following groups of NT API functions: NetErrorLog Environment: User Mode - Win32 Notes: You must include NETCONS.H before this file, since this file depends on values defined in NETCONS.H. --*/ #ifndef _LMERRLOG_ #define _LMERRLOG_ // // Data Structures - Config // typedef struct _ERROR_LOG { DWORD el_len; DWORD el_reserved; DWORD el_time; DWORD el_error; LPTSTR el_name; // pointer to service name LPTSTR el_text; // pointer to string array LPBYTE el_data; // pointer to BYTE array DWORD el_data_size; // byte count of el_data area DWORD el_nstrings; // number of strings in el_text. } ERROR_LOG, *PERROR_LOG, *LPERROR_LOG; // BUGBUG: Temporary to let users ifdef on this struct layout. #define REVISED_ERROR_LOG_STRUCT #ifndef _LMHLOGDEFINED_ #define _LMHLOGDEFINED_ typedef struct _HLOG { DWORD time; DWORD last_flags; DWORD offset; DWORD rec_offset; } HLOG, *PHLOG, *LPHLOG; #define LOGFLAGS_FORWARD 0 #define LOGFLAGS_BACKWARD 0x1 #define LOGFLAGS_SEEK 0x2 #endif // // Function Prototypes - ErrorLog // NET_API_STATUS NET_API_FUNCTION NetErrorLogClear ( IN LPTSTR server, IN LPTSTR backupfile, IN LPBYTE reserved ); NET_API_STATUS NET_API_FUNCTION NetErrorLogRead ( IN LPTSTR server, IN LPTSTR reserved1, IN LPHLOG errloghandle, IN DWORD offset, IN LPDWORD reserved2, IN DWORD reserved3, IN DWORD offsetflag, OUT LPBYTE * bufptr, IN DWORD prefmaxlen, OUT LPDWORD bytesread, OUT LPDWORD totalbytes ); NET_API_STATUS NET_API_FUNCTION NetErrorLogWrite ( IN LPBYTE reserved1, IN DWORD code, IN LPTSTR component, IN LPBYTE buffer, IN DWORD numbytes, IN LPBYTE msgbuf, IN DWORD strcount, IN LPBYTE reserved2 ); // // Special Values and Constants // // // Generic (could be used by more than one service) // error log messages from 0 to 25 // // Do not change the comments following the manifest constants without // understanding how mapmsg works. // #define ERRLOG_BASE 3100 /* NELOG errors start here */ #define NELOG_Internal_Error (ERRLOG_BASE + 0) /* * The operation failed because a network software error occurred. */ #define NELOG_Resource_Shortage (ERRLOG_BASE + 1) /* * The system ran out of a resource controlled by the %1 option. */ #define NELOG_Unable_To_Lock_Segment (ERRLOG_BASE + 2) /* * The service failed to obtain a long-term lock on the * segment for network control blocks (NCBs). The error code is the data. */ #define NELOG_Unable_To_Unlock_Segment (ERRLOG_BASE + 3) /* * The service failed to release the long-term lock on the * segment for network control blocks (NCBs). The error code is the data. */ #define NELOG_Uninstall_Service (ERRLOG_BASE + 4) /* * There was an error stopping service %1. * The error code from NetServiceControl is the data. */ #define NELOG_Init_Exec_Fail (ERRLOG_BASE + 5) /* * Initialization failed because of a system execution failure on * path %1. The system error code is the data. */ #define NELOG_Ncb_Error (ERRLOG_BASE + 6) /* * An unexpected network control block (NCB) was received. The NCB is the data. */ #define NELOG_Net_Not_Started (ERRLOG_BASE + 7) /* * The network is not started. */ #define NELOG_Ioctl_Error (ERRLOG_BASE + 8) /* * A DosDevIoctl or DosFsCtl to NETWKSTA.SYS failed. * The data shown is in this format: * DWORD approx CS:IP of call to ioctl or fsctl * WORD error code * WORD ioctl or fsctl number */ #define NELOG_System_Semaphore (ERRLOG_BASE + 9) /* * Unable to create or open system semaphore %1. * The error code is the data. */ #define NELOG_Init_OpenCreate_Err (ERRLOG_BASE + 10) /* * Initialization failed because of an open/create error on the * file %1. The system error code is the data. */ #define NELOG_NetBios (ERRLOG_BASE + 11) /* * An unexpected NetBIOS error occurred. * The error code is the data. */ #define NELOG_SMB_Illegal (ERRLOG_BASE + 12) /* * An illegal server message block (SMB) was received. * The SMB is the data. */ #define NELOG_Service_Fail (ERRLOG_BASE + 13) /* * Initialization failed because the requested service %1 * could not be started. */ #define NELOG_Entries_Lost (ERRLOG_BASE + 14) /* * Some entries in the error log were lost because of a buffer * overflow. */ // // Server specific error log messages from 20 to 40 // #define NELOG_Init_Seg_Overflow (ERRLOG_BASE + 20) /* * Initialization parameters controlling resource usage other * than net buffers are sized so that too much memory is needed. */ #define NELOG_Srv_No_Mem_Grow (ERRLOG_BASE + 21) /* * The server cannot increase the size of a memory segment. */ #define NELOG_Access_File_Bad (ERRLOG_BASE + 22) /* * Initialization failed because account file %1 is either incorrect * or not present. */ #define NELOG_Srvnet_Not_Started (ERRLOG_BASE + 23) /* * Initialization failed because network %1 was not started. */ #define NELOG_Init_Chardev_Err (ERRLOG_BASE + 24) /* * The server failed to start. Either all three chdev * parameters must be zero or all three must be nonzero. */ #define NELOG_Remote_API (ERRLOG_BASE + 25) /* A remote API request was halted due to the following * invalid description string: %1. */ #define NELOG_Ncb_TooManyErr (ERRLOG_BASE + 26) /* The network %1 ran out of network control blocks (NCBs). You may need to increase NCBs * for this network. The following information includes the * number of NCBs submitted by the server when this error occurred: */ #define NELOG_Mailslot_err (ERRLOG_BASE + 27) /* The server cannot create the %1 mailslot needed to send * the ReleaseMemory alert message. The error received is: */ #define NELOG_ReleaseMem_Alert (ERRLOG_BASE + 28) /* The server failed to register for the ReleaseMemory alert, * with recipient %1. The error code from * NetAlertStart is the data. */ #define NELOG_AT_cannot_write (ERRLOG_BASE + 29) /* The server cannot update the AT schedule file. The file * is corrupted. */ #define NELOG_Cant_Make_Msg_File (ERRLOG_BASE + 30) /* The server encountered an error when calling * NetIMakeLMFileName. The error code is the data. */ #define NELOG_Exec_Netservr_NoMem (ERRLOG_BASE + 31) /* Initialization failed because of a system execution failure on * path %1. There is not enough memory to start the process. * The system error code is the data. */ #define NELOG_Server_Lock_Failure (ERRLOG_BASE + 32) /* Longterm lock of the server buffers failed. * Check swap disk's free space and restart the system to start the server. */ // // Message service and POPUP specific error log messages from 40 to 55 // #define NELOG_Msg_Shutdown (ERRLOG_BASE + 40) /* * The service has stopped due to repeated consecutive * occurrences of a network control block (NCB) error. The last bad NCB follows * in raw data. */ #define NELOG_Msg_Sem_Shutdown (ERRLOG_BASE + 41) /* * The Message server has stopped due to a lock on the * Message server shared data segment. */ #define NELOG_Msg_Log_Err (ERRLOG_BASE + 50) /* * A file system error occurred while opening or writing to the * system message log file %1. Message logging has been * switched off due to the error. The error code is the data. */ #define NELOG_VIO_POPUP_ERR (ERRLOG_BASE + 51) /* * Unable to display message POPUP due to system VIO call error. * The error code is the data. */ #define NELOG_Msg_Unexpected_SMB_Type (ERRLOG_BASE + 52) /* * An illegal server message block (SMB) was received. The SMB is the data. */ // // Workstation specific error log messages from 60 to 75 // #define NELOG_Wksta_Infoseg (ERRLOG_BASE + 60) /* * The workstation information segment is bigger than 64K. * The size follows, in DWORD format: */ #define NELOG_Wksta_Compname (ERRLOG_BASE + 61) /* * The workstation was unable to get the name-number of the computer. */ #define NELOG_Wksta_BiosThreadFailure (ERRLOG_BASE + 62) /* * The workstation could not initialize the Async NetBIOS Thread. * The error code is the data. */ #define NELOG_Wksta_IniSeg (ERRLOG_BASE + 63) /* * The workstation could not open the initial shared segment. * The error code is the data. */ #define NELOG_Wksta_HostTab_Full (ERRLOG_BASE + 64) /* * The workstation host table is full. */ #define NELOG_Wksta_Bad_Mailslot_SMB (ERRLOG_BASE + 65) /* * A bad mailslot server message block (SMB) was received. The SMB is the data. */ #define NELOG_Wksta_UASInit (ERRLOG_BASE + 66) /* * The workstation encountered an error while trying to start the user accounts database. * The error code is the data. */ #define NELOG_Wksta_SSIRelogon (ERRLOG_BASE + 67) /* * The workstation encountered an error while responding to an SSI revalidation request. * The function code and the error codes are the data. */ // // Alerter service specific error log messages from 70 to 79 // #define NELOG_Build_Name (ERRLOG_BASE + 70) /* * The Alerter service had a problem creating the list of * alert recipients. The error code is %1. */ #define NELOG_Name_Expansion (ERRLOG_BASE + 71) /* * There was an error expanding %1 as a group name. Try * splitting the group into two or more smaller groups. */ #define NELOG_Message_Send (ERRLOG_BASE + 72) /* * There was an error sending %2 the alert message - * ( * %3 ) * The error code is %1. */ #define NELOG_Mail_Slt_Err (ERRLOG_BASE + 73) /* * There was an error in creating or reading the alerter mailslot. * The error code is %1. */ #define NELOG_AT_cannot_read (ERRLOG_BASE + 74) /* * The server could not read the AT schedule file. */ #define NELOG_AT_sched_err (ERRLOG_BASE + 75) /* * The server found an invalid AT schedule record. */ #define NELOG_AT_schedule_file_created (ERRLOG_BASE + 76) /* * The server could not find an AT schedule file so it created one. */ #define NELOG_Srvnet_NB_Open (ERRLOG_BASE + 77) /* * The server could not access the %1 network with NetBiosOpen. */ #define NELOG_AT_Exec_Err (ERRLOG_BASE + 78) /* * The AT command processor could not run %1. */ // // Cache Lazy Write and HPFS386 specific error log messages from 80 to 89 // #define NELOG_Lazy_Write_Err (ERRLOG_BASE + 80) /* * WARNING: Because of a lazy-write error, drive %1 now * contains some corrupted data. The cache is stopped. */ #define NELOG_HotFix (ERRLOG_BASE + 81) /* * A defective sector on drive %1 has been replaced (hotfixed). * No data was lost. You should run CHKDSK soon to restore full * performance and replenish the volume's spare sector pool. * * The hotfix occurred while processing a remote request. */ #define NELOG_HardErr_From_Server (ERRLOG_BASE + 82) /* * A disk error occurred on the HPFS volume in drive %1. * The error occurred while processing a remote request. */ #define NELOG_LocalSecFail1 (ERRLOG_BASE + 83) /* * The user accounts database (NET.ACC) is corrupted. The local security * system is replacing the corrupted NET.ACC with the backup * made at %1. * Any updates made to the database after this time are lost. * */ #define NELOG_LocalSecFail2 (ERRLOG_BASE + 84) /* * The user accounts database (NET.ACC) is missing. The local * security system is restoring the backup database * made at %1. * Any updates made to the database made after this time are lost. * */ #define NELOG_LocalSecFail3 (ERRLOG_BASE + 85) /* * Local security could not be started because the user accounts database * (NET.ACC) was missing or corrupted, and no usable backup * database was present. * * THE SYSTEM IS NOT SECURE. */ #define NELOG_LocalSecGeneralFail (ERRLOG_BASE + 86) /* * Local security could not be started because an error * occurred during initialization. The error code returned is %1. * * THE SYSTEM IS NOT SECURE. * */ // // NETWKSTA.SYS specific error log messages from 90 to 99 // #define NELOG_NetWkSta_Internal_Error (ERRLOG_BASE + 90) /* * A NetWksta internal error has occurred: * %1 */ #define NELOG_NetWkSta_No_Resource (ERRLOG_BASE + 91) /* * The redirector is out of a resource: %1. */ #define NELOG_NetWkSta_SMB_Err (ERRLOG_BASE + 92) /* * A server message block (SMB) error occurred on the connection to %1. * The SMB header is the data. */ #define NELOG_NetWkSta_VC_Err (ERRLOG_BASE + 93) /* * A virtual circuit error occurred on the session to %1. * The network control block (NCB) command and return code is the data. */ #define NELOG_NetWkSta_Stuck_VC_Err (ERRLOG_BASE + 94) /* * Hanging up a stuck session to %1. */ #define NELOG_NetWkSta_NCB_Err (ERRLOG_BASE + 95) /* * A network control block (NCB) error occurred (%1). * The NCB is the data. */ #define NELOG_NetWkSta_Write_Behind_Err (ERRLOG_BASE + 96) /* * A write operation to %1 failed. * Data may have been lost. */ #define NELOG_NetWkSta_Reset_Err (ERRLOG_BASE + 97) /* * Reset of driver %1 failed to complete the network control block (NCB). * The NCB is the data. */ #define NELOG_NetWkSta_Too_Many (ERRLOG_BASE + 98) /* * The amount of resource %1 requested was more * than the maximum. The maximum amount was allocated. */ // // Spooler specific error log messages from 100 to 103 // #define NELOG_Srv_Thread_Failure (ERRLOG_BASE + 104) /* * The server could not create a thread. * The THREADS parameter in the CONFIG.SYS file should be increased. */ #define NELOG_Srv_Close_Failure (ERRLOG_BASE + 105) /* * The server could not close %1. * The file is probably corrupted. */ #define NELOG_ReplUserCurDir (ERRLOG_BASE + 106) /* *The replicator cannot update directory %1. It has tree integrity * and is the current directory for some process. */ #define NELOG_ReplCannotMasterDir (ERRLOG_BASE + 107) /* *The server cannot export directory %1 to client %2. * It is exported from another server. */ #define NELOG_ReplUpdateError (ERRLOG_BASE + 108) /* *The replication server could not update directory %2 from the source * on %3 due to error %1. */ #define NELOG_ReplLostMaster (ERRLOG_BASE + 109) /* *Master %1 did not send an update notice for directory %2 at the expected * time. */ #define NELOG_NetlogonAuthDCFail (ERRLOG_BASE + 110) /* *Failed to authenticate with %2, a Windows NT domain controller for domain %1. */ #define NELOG_ReplLogonFailed (ERRLOG_BASE + 111) /* *The replicator attempted to log on at %2 as %1 and failed. */ #define NELOG_ReplNetErr (ERRLOG_BASE + 112) /* * Network error %1 occurred. */ #define NELOG_ReplMaxFiles (ERRLOG_BASE + 113) /* * Replicator limit for files in a directory has been exceeded. */ #define NELOG_ReplMaxTreeDepth (ERRLOG_BASE + 114) /* * Replicator limit for tree depth has been exceeded. */ #define NELOG_ReplBadMsg (ERRLOG_BASE + 115) /* * Unrecognized message received in mailslot. */ #define NELOG_ReplSysErr (ERRLOG_BASE + 116) /* * System error %1 occurred. */ #define NELOG_ReplUserLoged (ERRLOG_BASE + 117) /* * Cannot log on. User is currently logged on and argument TRYUSER * is set to NO. */ #define NELOG_ReplBadImport (ERRLOG_BASE + 118) /* * IMPORT path %1 cannot be found. */ #define NELOG_ReplBadExport (ERRLOG_BASE + 119) /* * EXPORT path %1 cannot be found. */ #define NELOG_ReplSignalFileErr (ERRLOG_BASE + 120) /* * Replicator failed to update signal file in directory %2 due to * %1 system error. */ #define NELOG_DiskFT (ERRLOG_BASE+121) /* * Disk Fault Tolerance Error * * %1 */ #define NELOG_ReplAccessDenied (ERRLOG_BASE + 122) /* * Replicator could not access %2 * on %3 due to system error %1. */ #define NELOG_NetlogonFailedPrimary (ERRLOG_BASE + 123) /* *The primary domain controller for domain %1 has apparently failed. */ #define NELOG_NetlogonPasswdSetFailed (ERRLOG_BASE + 124) /* * Changing machine account password for account %1 failed with * the following error: %n%2 */ #define NELOG_NetlogonTrackingError (ERRLOG_BASE + 125) /* *An error occurred while updating the logon or logoff information for %1. */ #define NELOG_NetlogonSyncError (ERRLOG_BASE + 126) /* *An error occurred while synchronizing with primary domain controller %1 */ // // UPS service specific error log messages from 130 to 135 // #define NELOG_UPS_PowerOut (ERRLOG_BASE + 130) /* * A power failure was detected at the server. */ #define NELOG_UPS_Shutdown (ERRLOG_BASE + 131) /* * The UPS service performed server shut down. */ #define NELOG_UPS_CmdFileError (ERRLOG_BASE + 132) /* * The UPS service did not complete execution of the * user specified shut down command file. */ #define NELOG_UPS_CannotOpenDriver (ERRLOG_BASE+133) /* * The UPS driver could not be opened. The error code is * the data. */ #define NELOG_UPS_PowerBack (ERRLOG_BASE + 134) /* * Power has been restored. */ #define NELOG_UPS_CmdFileConfig (ERRLOG_BASE + 135) /* * There is a problem with a configuration of user specified * shut down command file. */ #define NELOG_UPS_CmdFileExec (ERRLOG_BASE + 136) /* * The UPS service failed to execute a user specified shutdown * command file %1. The error code is the data. */ // // Remoteboot server specific error log messages are from 150 to 157 // #define NELOG_Missing_Parameter (ERRLOG_BASE + 150) /* * Initialization failed because of an invalid or missing * parameter in the configuration file %1. */ #define NELOG_Invalid_Config_Line (ERRLOG_BASE + 151) /* * Initialization failed because of an invalid line in the * configuration file %1. The invalid line is the data. */ #define NELOG_Invalid_Config_File (ERRLOG_BASE + 152) /* * Initialization failed because of an error in the configuration * file %1. */ #define NELOG_File_Changed (ERRLOG_BASE + 153) /* * The file %1 has been changed after initialization. * The boot-block loading was temporarily terminated. */ #define NELOG_Files_Dont_Fit (ERRLOG_BASE + 154) /* * The files do not fit to the boot-block configuration * file %1. Change the BASE and ORG definitions or the order * of the files. */ #define NELOG_Wrong_DLL_Version (ERRLOG_BASE + 155) /* * Initialization failed because the dynamic-link * library %1 returned an incorrect version number. */ #define NELOG_Error_in_DLL (ERRLOG_BASE + 156) /* * There was an unrecoverable error in the dynamic- * link library of the service. */ #define NELOG_System_Error (ERRLOG_BASE + 157) /* * The system returned an unexpected error code. * The error code is the data. */ #define NELOG_FT_ErrLog_Too_Large (ERRLOG_BASE + 158) /* * The fault-tolerance error log file, LANROOT\LOGS\FT.LOG, * is more than 64K. */ #define NELOG_FT_Update_In_Progress (ERRLOG_BASE + 159) /* * The fault-tolerance error-log file, LANROOT\LOGS\FT.LOG, had the * update in progress bit set upon opening, which means that the * system crashed while working on the error log. */ // // Microsoft has created a generic error log entry for OEMs to use to // log errors from OEM value added services. The code, which is the // 2nd arg to NetErrorLogWrite, is 3299. This value is manifest in // NET/H/ERRLOG.H as NELOG_OEM_Code. The text for error log entry // NELOG_OEM_Code is: "%1 %2 %3 %4 %5 %6 %7 %8 %9.". // // Microsoft suggests that OEMs use the insertion strings as follows: // %1: OEM System Name (e.g. 3+Open) // %2: OEM Service Name (e.g. 3+Mail) // %3: Severity level (e.g. error, warning, etc.) // %4: OEM error log entry sub-identifier (e.g. error code #) // %5 - % 9: Text. // // The call to NetErrorWrite must set nstrings = 9, and provide 9 // ASCIIZ strings. If the caller does not have 9 insertion strings, // provide null strings for the empty insertion strings. // #define NELOG_OEM_Code (ERRLOG_BASE + 199) /* * %1 %2 %3 %4 %5 %6 %7 %8 %9. */ // // another error log range defined for NT Lanman. // #define ERRLOG2_BASE 5700 /* New NT NELOG errors start here */ #define NELOG_NetlogonSSIInitError (ERRLOG2_BASE + 0) /* * The Netlogon service could not initialize the replication data * structures successfully. The service was terminated. The following * error occurred: %n%1 */ #define NELOG_NetlogonFailedToUpdateTrustList (ERRLOG2_BASE + 1) /* * The Netlogon service failed to update the domain trust list. The * following error occurred: %n%1 */ #define NELOG_NetlogonFailedToAddRpcInterface (ERRLOG2_BASE + 2) /* * The Netlogon service could not add the RPC interface. The * service was terminated. The following error occurred: %n%1 */ #define NELOG_NetlogonFailedToReadMailslot (ERRLOG2_BASE + 3) /* * The Netlogon service could not read a mailslot message from %1 due * to the following error: %n%2 */ #define NELOG_NetlogonFailedToRegisterSC (ERRLOG2_BASE + 4) /* * The Netlogon service failed to register the service with the * service controller. The service was terminated. The following * error occurred: %n%1 */ #define NELOG_NetlogonChangeLogCorrupt (ERRLOG2_BASE + 5) /* * The change log cache maintained by the Netlogon service for * database changes is corrupted. The Netlogon service is resetting * the change log. */ #define NELOG_NetlogonFailedToCreateShare (ERRLOG2_BASE + 6) /* * The Netlogon service could not create server share %1. The following * error occurred: %n%2 */ #define NELOG_NetlogonDownLevelLogonFailed (ERRLOG2_BASE + 7) /* * The down-level logon request for the user %1 from %2 failed. */ #define NELOG_NetlogonDownLevelLogoffFailed (ERRLOG2_BASE + 8) /* * The down-level logoff request for the user %1 from %2 failed. */ #define NELOG_NetlogonNTLogonFailed (ERRLOG2_BASE + 9) /* * The Windows NT %1 logon request for the user %2\%3 from %4 (via %5) * failed. */ #define NELOG_NetlogonNTLogoffFailed (ERRLOG2_BASE + 10) /* * The Windows NT %1 logoff request for the user %2\%3 from %4 * failed. */ #define NELOG_NetlogonPartialSyncCallSuccess (ERRLOG2_BASE + 11) /* * The partial synchronization request from the server %1 completed * successfully. %2 changes(s) has(have) been returned to the * caller. */ #define NELOG_NetlogonPartialSyncCallFailed (ERRLOG2_BASE + 12) /* * The partial synchronization request from the server %1 failed with * the following error: %n%2 */ #define NELOG_NetlogonFullSyncCallSuccess (ERRLOG2_BASE + 13) /* * The full synchronization request from the server %1 completed * successfully. %2 object(s) has(have) been returned to * the caller. */ #define NELOG_NetlogonFullSyncCallFailed (ERRLOG2_BASE + 14) /* * The full synchronization request from the server %1 failed with * the following error: %n%2 */ #define NELOG_NetlogonPartialSyncSuccess (ERRLOG2_BASE + 15) /* * The partial synchronization replication of the %1 database from the * primary domain controller %2 completed successfully. %3 change(s) is(are) * applied to the database. */ #define NELOG_NetlogonPartialSyncFailed (ERRLOG2_BASE + 16) /* * The partial synchronization replication of the %1 database from the * primary domain controller %2 failed with the following error: %n%3 */ #define NELOG_NetlogonFullSyncSuccess (ERRLOG2_BASE + 17) /* * The full synchronization replication of the %1 database from the * primary domain controller %2 completed successfully. */ #define NELOG_NetlogonFullSyncFailed (ERRLOG2_BASE + 18) /* * The full synchronization replication of the %1 database from the * primary domain controller %2 failed with the following error: %n%3 */ #define NELOG_NetlogonAuthNoDomainController (ERRLOG2_BASE + 19) /* * No Windows NT Domain Controller is available for domain %1 for * the following reason: %n%2 */ #define NELOG_NetlogonAuthNoTrustLsaSecret (ERRLOG2_BASE + 20) /* * The session setup to the Windows NT Domain Controller %1 for the domain %2 * failed because the computer %3 does not have a local security database account. */ #define NELOG_NetlogonAuthNoTrustSamAccount (ERRLOG2_BASE + 21) /* * The session setup to the Windows NT Domain Controller %1 for the domain %2 * failed because the Windows NT Domain Controller does not have an account * for the computer %3. */ #define NELOG_NetlogonServerAuthFailed (ERRLOG2_BASE + 22) /* * The session setup from the computer %1 failed to authenticate. * The name of the account referenced in the security database is * %2. The following error occurred: %n%3 */ #define NELOG_NetlogonServerAuthNoTrustSamAccount (ERRLOG2_BASE + 23) /* * The session setup from the computer %1 failed because there is * no trust account in the security database for this computer. The name of * the account referenced in the security database is %2. */ // // General log messages for NT services. // #define NELOG_FailedToRegisterSC (ERRLOG2_BASE + 24) /* * Could not register control handler with service controller %1. */ #define NELOG_FailedToSetServiceStatus (ERRLOG2_BASE + 25) /* * Could not set service status with service controller %1. */ #define NELOG_FailedToGetComputerName (ERRLOG2_BASE + 26) /* * Could not find the computer name %1. */ #define NELOG_DriverNotLoaded (ERRLOG2_BASE + 27) /* * Could not load %1 device driver. */ #define NELOG_NoTranportLoaded (ERRLOG2_BASE + 28) /* * Could not load any transport. */ // // More Netlogon service events // #define NELOG_NetlogonFailedDomainDelta (ERRLOG2_BASE + 29) /* * Replication of the %1 Domain Object "%2" from primary domain controller * %3 failed with the following error: %n%4 */ #define NELOG_NetlogonFailedGlobalGroupDelta (ERRLOG2_BASE + 30) /* * Replication of the %1 Global Group "%2" from primary domain controller * %3 failed with the following error: %n%4 */ #define NELOG_NetlogonFailedLocalGroupDelta (ERRLOG2_BASE + 31) /* * Replication of the %1 Local Group "%2" from primary domain controller * %3 failed with the following error: %n%4 */ #define NELOG_NetlogonFailedUserDelta (ERRLOG2_BASE + 32) /* * Replication of the %1 User "%2" from primary domain controller * %3 failed with the following error: %n%4 */ #define NELOG_NetlogonFailedPolicyDelta (ERRLOG2_BASE + 33) /* * Replication of the %1 Policy Object "%2" from primary domain controller * %3 failed with the following error: %n%4 */ #define NELOG_NetlogonFailedTrustedDomainDelta (ERRLOG2_BASE + 34) /* * Replication of the %1 Trusted Domain Object "%2" from primary domain controller * %3 failed with the following error: %n%4 */ #define NELOG_NetlogonFailedAccountDelta (ERRLOG2_BASE + 35) /* * Replication of the %1 Account Object "%2" from primary domain controller * %3 failed with the following error: %n%4 */ #define NELOG_NetlogonFailedSecretDelta (ERRLOG2_BASE + 36) /* * Replication of the %1 Secret "%2" from primary domain controller * %3 failed with the following error: %n%4 */ #define NELOG_NetlogonSystemError (ERRLOG2_BASE + 37) /* * The system returned the following unexpected error code: %n%1 */ #define NELOG_NetlogonDuplicateMachineAccounts (ERRLOG2_BASE + 38) /* * Netlogon has detected two machine accounts for server "%1". * The server can be either a Windows NT Server that is a member of the * domain or the server can be a LAN Manager server with an account in the * SERVERS global group. It cannot be both. */ #define NELOG_NetlogonTooManyGlobalGroups (ERRLOG2_BASE + 39) /* * This domain has more global groups than can be replicated to a LanMan * BDC. Either delete some of your global groups or remove the LanMan * BDCs from the domain. */ #define NELOG_NetlogonBrowserDriver (ERRLOG2_BASE + 40) /* * The Browser driver returned the following error to Netlogon: %n%1 */ #define NELOG_NetlogonAddNameFailure (ERRLOG2_BASE + 41) /* * Netlogon could not register the %1<1B> name for the following reason: %n%2 */ // // More Remoteboot service events. // #define NELOG_RplMessages (ERRLOG2_BASE + 42) /* * Service failed to retrieve messages needed to boot remote boot clients. */ #define NELOG_RplXnsBoot (ERRLOG2_BASE + 43) /* * Service experienced a severe error and can no longer provide remote boot * for 3Com 3Start remote boot clients. */ #define NELOG_RplSystem (ERRLOG2_BASE + 44) /* * Service experienced a severe system error and will shut itself down. */ #define NELOG_RplWkstaTimeout (ERRLOG2_BASE + 45) /* * Client with computer name %1 failed to acknowledge receipt of the * boot data. Remote boot of this client was not completed. */ #define NELOG_RplWkstaFileOpen (ERRLOG2_BASE + 46) /* * Client with computer name %1 was not booted due to an error in opening * file %2. */ #define NELOG_RplWkstaFileRead (ERRLOG2_BASE + 47) /* * Client with computer name %1 was not booted due to an error in reading * file %2. */ #define NELOG_RplWkstaMemory (ERRLOG2_BASE + 48) /* * Client with computer name %1 was not booted due to insufficent memory * at the remote boot server. */ #define NELOG_RplWkstaFileChecksum (ERRLOG2_BASE + 49) /* * Client with computer name %1 will be booted without using checksums * because checksum for file %2 could not be calculated. */ #define NELOG_RplWkstaFileLineCount (ERRLOG2_BASE + 50) /* * Client with computer name %1 was not booted due to too many lines in * file %2. */ #define NELOG_RplWkstaBbcFile (ERRLOG2_BASE + 51) /* * Client with computer name %1 was not booted because the boot block * configuration file %2 for this client does not contain boot block * line and/or loader line. */ #define NELOG_RplWkstaFileSize (ERRLOG2_BASE + 52) /* * Client with computer name %1 was not booted due to a bad size of * file %2. */ #define NELOG_RplWkstaInternal (ERRLOG2_BASE + 53) /* * Client with computer name %1 was not booted due to remote boot * service internal error. */ #define NELOG_RplWkstaWrongVersion (ERRLOG2_BASE + 54) /* * Client with computer name %1 was not booted because file %2 has an * invalid boot header. */ #define NELOG_RplWkstaNetwork (ERRLOG2_BASE + 55) /* * Client with computer name %1 was not booted due to network error. */ #define NELOG_RplAdapterResource (ERRLOG2_BASE + 56) /* * Client with adapter id %1 was not booted due to lack of resources. */ #define NELOG_RplFileCopy (ERRLOG2_BASE + 57) /* * Service experienced error copying file or directory %1. */ #define NELOG_RplFileDelete (ERRLOG2_BASE + 58) /* * Service experienced error deleting file or directory %1. */ #define NELOG_RplFilePerms (ERRLOG2_BASE + 59) /* * Service experienced error setting permissions on file or directory %1. */ #define NELOG_RplCheckConfigs (ERRLOG2_BASE + 60) /* * Service experienced error evaluating RPL configurations. */ #define NELOG_RplCreateProfiles (ERRLOG2_BASE + 61) /* * Service experienced error creating RPL profiles for all configurations. */ #define NELOG_RplRegistry (ERRLOG2_BASE + 62) /* * Service experienced error accessing registry. */ #define NELOG_RplReplaceRPLDISK (ERRLOG2_BASE + 63) /* * Service experienced error replacing possibly outdated RPLDISK.SYS. */ #define NELOG_RplCheckSecurity (ERRLOG2_BASE + 64) /* * Service experienced error adding security accounts or setting * file permissions. These accounts are the RPLUSER local group * and the user accounts for the individual RPL workstations. */ #define NELOG_RplBackupDatabase (ERRLOG2_BASE + 65) /* * Service failed to back up its database. */ #define NELOG_RplInitDatabase (ERRLOG2_BASE + 66) /* * Service failed to initialize from its database. The database may be * missing or corrupted. Service will attempt restoring the database * from the backup. */ #define NELOG_RplRestoreDatabaseFailure (ERRLOG2_BASE + 67) /* * Service failed to restore its database from the backup. Service * will not start. */ #define NELOG_RplRestoreDatabaseSuccess (ERRLOG2_BASE + 68) /* * Service sucessfully restored its database from the backup. */ #define NELOG_RplInitRestoredDatabase (ERRLOG2_BASE + 69) /* * Service failed to initialize from its restored database. Service * will not start. */ // // More Netlogon service events // #define NELOG_NetlogonSessionTypeWrong (ERRLOG2_BASE + 70) /* * The session setup to the Windows NT Domain Controller %1 from computer * %2 using account %4 failed. %2 is declared to be a BDC in domain %3. * However, %2 tried to connect as either a DC in a trusted domain, * a member workstation in domain %3, or as a server in domain %3. * Use the Server Manager to remove the BDC account for %2. */ #endif // _LMERRLOG_