;***********************************************************************
;
; oenmadnm.INF
;
;       NE2000 Micro Channel network card and driver SETUP INF file.
;
; History:
;       terryk          02-Mar-1994     Created
;
;***********************************************************************

;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with.  The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
;  Types specific to networking:
;
; NetAdapter,        a netcard / adapter combination or just a netcard
; NetDriver,         just a netcard driver
; NetTransport,      a complete NDIS-compliant TDI transport stack
; NetService,        an NT networking service
; NetWork,           a complete network ensemble.
; NetProvider        a complete network which supports NT MPR protocol
;-----------------------------------------------------------------------

[Identification]
    OptionType = NetAdapter

;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA and MCA
;-----------------------------------------------------------------------

[PlatformsSupported]
    MCA

;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names.  These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------

[Options]
    NE2000MCA

;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************

[FileConstants]
;
;  File names, etc.
;
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
;ShellCode      = 0

;
; EventLog Message File
;
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"

NE2000MCA_1BYTE    = { 176, 31, 84 }
NE2000MCA_2BYTE    = { 103, 97, 113 }
NETCARD_ID      = { 26544, 24863, 29012 }

IOBaseAddrHexList = { "0x300","0x320","0x340","0x360" }
IOBaseAddrDecList = { 768, 800, 832, 864 }

IRQList = {2,3,4,5,6,7,8,10,11,12,13,14,15}

;
; Product Info
;
Manufacturer    = "Microsoft"
ProductMajorVersion     = "4"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Software
;
ProductSoftwareName     = "NE2000MCA"
ProductSoftwareImagePath = "\SystemRoot\system32\drivers\ne2000.sys"
NetRuleSoftwareType     = "ne2000MCASys ndisDriver ne2000MCADriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """NE2000MCASys"" yes no container"
NetRuleSoftwareClass    = {"ne2000MCADriver basic"}
NetRuleSoftwareBindable = {"ne2000MCADriver ne2000MCAAdapter non exclusive 100"}
;
; Hardware
;
ProductHardwareName     = "NE2000MCA"
NetRuleHardwareType     = "ne2000MCA ne2000MCAAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"ne2000MCAAdapter basic"}
ProductOpSupport     = 134 ; 0x0086 ; Display,Removable,Properties,Not Updatable
ProductOtherOpSupport     = 132 ; 0x0084 ; Display,Removable,Not Properties,Not Updatable
;
; Registry Key
;
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
;
;  Program flow control variables.
;
from      = ""
to        = ""
;
;  Return codes; Exit_Code is set to one of these
;
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2

KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""

TRUE            = 1
FALSE           = 0
NoTitle            = 0

ExitState   = "Active"
OldVersionExisted = $(FALSE)

DriverPath      = $(!STF_NTPATH)\drivers

[date]
    ; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
    ; Minute, Second }
    Now = {} ? $(!LIBHANDLE) GetSystemDate


;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION:   To verify that this INF deals with the same type of options
;                as we are choosing currently.
;
; INPUT:         None
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL
;                $($R1): Option Type (COMPUTER ...)
;                $($R2): Diskette description
;---------------------------------------------------------------------------

[Identify]
    ;
    ;
    read-syms Identification

    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)

    Return $(Status) $(Identifier) $(Media)

;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION:   To return the option list supported by this INF and the
;                localised text list representing the options.
;
;
; INPUT:         $($0):  Language used. ( ENG | FRN | ... )
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL |
;                                STATUS_NOLANGUAGE
;                                STATUS_FAILED
;                                STATUS_NOTSUPPORTED
;
;                $($R1): Option List
;                $($R2): Option Text List
;------------------------------------------------------------------------

[ReturnOptions]
    ;
    ;
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ;
        ; Check if the platforms requested is supported
        ;
        ifstr(i) $($1) == ""
           goto returnoptions
        endif

        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif

    ;
    ; form a list of all the options and another of the text representing
    ;

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

;----------InstallOption-------------------------------------------------
;
; InstallOption:
;
;      This section is shelled to by main installation processing
;      or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION:  To copy files representing Options
;            To configure the installed option
;            To update the registry for the installed option
;
; INPUT:     $($0):  Language to use
;            $($1):  OptionID to install
;            $($2):  SourceDirectory
;            $($3):  AddCopy  (YES | NO)
;            $($4):  DoCopy   (YES | NO)
;            $($5):  DoConfig (YES | NO)
;
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;                            STATUS_NOLANGUAGE |
;                            STATUS_USERCANCEL |
;                            STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
    ;
    ; extract parameters
    ;
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif

    Debug-Output "oenmadnm.INF: STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output "oenmadnm.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)

    ; define all the constants

    set-subst LF = "\n"

    read-syms GeneralConstants
    read-syms FileConstants

    read-syms DialogConstants$(!STF_LANGUAGE)
    read-syms FileConstants$(!STF_LANGUAGE)

    detect date

    set-title  $(FunctionTitle)

    set to   = Begin
    set from = Begin
;
;  Assume all is well.
;
    set CommonStatus = STATUS_SUCCESSFUL

    EndWait

;
;   Set up the operation-mode-based variables and gaily welcome
;   the user.  If the "install mode" variable is improperly set,
;   assume this is a new installation.
;

Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set StartLabel = configureadapter
    else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif

    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

;-----------------------------------------------
; Installation Section
;-----------------------------------------------

installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)
        ;
        ; Same version already existed in the local machine
        ; Popup the dialog and ask the user whether he wants to continue
        ;
        CloseRegKey $(KeyProduct)

        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           ;
           ; Cannot Install the same software again
           ;
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif

           goto end
        else
           ;
           ; Add a new adapter card?
           ;
           Shell $(UtilityInf), CardExistedDlg

           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif

           ifstr(i) $($R1) != "OK"
               Set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    endif

    goto nextstep


;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
configureadapter = +
    ;
    ;   You cannot config the software component
    ;
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Debug-Output "Cannot configure the ne2000 driver software."
        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
    else
        goto configureadapter2
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    set from = end
    set to = end
    goto nonfatalinfo

configureadapter2 = +

    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) NetCardKey
    ifstr(i) $(NetCardKey) == ""
        set CommonStatus = STATUS_USERCANCEL
        goto successful
    endif
    GetRegValue $(NetCardKey) "ServiceName" ServiceInfo
    set ServiceName = *($(ServiceInfo),4)
    CloseRegKey $(NetCardKey)

    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" $(MAXIMUM_ALLOWED) ParamKey
    ifstr(i) $(ParamKey) != ""
        GetRegValue $(ParamKey),"McaPosId", McaPosIdInfo

        ifint *($(McaPosIdInfo),4) != 24863
            ;
            ; Display error message if it is not UB NE2000
            ;
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error: cannot get an error string."
                goto ShellCodeError
            endif
            set Error = $($R0)
            set from = end
            set to = end
            goto nonfatalinfo
        endif

        GetRegValue $(ParamKey),"InterruptNumber", InterruptNumberInfo
        set IRQValue = *($(IRQList),~($(IRQList), *($(InterruptNumberInfo),4)))
        GetRegValue $(ParamKey),"IOBaseAddress", IOBaseInfo
        set IOBaseAddress = *($(IOBaseAddrHexList),~($(IOBaseAddrDecList), *($(IOBaseInfo),4)))
        read-syms FileDependentDlg$(!STF_LANGUAGE)
        ui start "Config"
        ifstr(i) $(DLGEVENT) == "CONTINUE"
            set IRQValue = $(Combo1Out)
            set IOBaseAddress = $(Combo2Out)
            set IOBaseAddrValue = *($(IOBaseAddrDecList), ~($(IOBaseAddrHexList),+
                $(IOBaseAddress)))
            SetRegValue $(ParamKey) {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)}
            SetRegValue $(ParamKey) {IOBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}
            ui pop 1
        else
            set CommonStatus = STATUS_USERCANCEL
            ui pop 1
        endif
        CloseRegKey $(ParamKey)
    endif
    goto successful
;
;   If installing, go create the necessary keys;
;   if configuring, they're already open.
;
nextstep = +
    StartWait

installproduct = +
    set cardlist = {}
    ; find 0x67b0
    Shell $(UtilityInf), MCAFindBus, *($(NE2000MCA_1BYTE),1), *($(NE2000MCA_2BYTE),1)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr $($R0) != "NO_ERROR"
        set Error = $($R0)
        goto fatal
    endif

    ifstr(i) $($R1) != {}
        set cardlist = $($R1)
    endif

    ; find 0x611f
    Shell $(UtilityInf), MCAFindBus, *($(NE2000MCA_1BYTE),2), *($(NE2000MCA_2BYTE),2)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr $($R0) != "NO_ERROR"
        set Error = $($R0)
        goto fatal
    endif

    ifstr(i) $($R1) != {}
        ifstr(i) $(cardlist) != {}
            set cardlist = >($(cardlist),$($R1))
        else
            set cardlist = $($R1)
        endif
    endif

    ; find 0x7154
    Shell $(UtilityInf), MCAFindBus, *($(NE2000MCA_1BYTE),3), *($(NE2000MCA_2BYTE),3)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr $($R0) != "NO_ERROR"
        set Error = $($R0)
        goto fatal
    endif

    ifstr(i) $($R1) != {}
        ifstr(i) $(cardlist) != {}
            set cardlist = >($(cardlist),$($R1))
        else
            set cardlist = $($R1)
        endif
    endif

    ifstr(i) $(cardlist) == {}
        set Error = $(CANNOT_FIND_ANY_CARD)
        set CommonStatus = STATUS_USERCANCEL
        set from = "end"
        goto nonfatal
    endif

    set AdapterList = $(cardlist)
    ;
    ; Install Software Component
    ;
    ifint $(OldVersionExisted) == $(FALSE)
        ifstr(i) $(!NTN_InstallMode) == "install"
           Ifstr(i) $(DoCopy) == "YES"

              Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES

              Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  Goto ShellCodeError
              Else-Ifstr(i) $($R0) == STATUS_FAILED
                  Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                  ifint $($ShellCode) != $(!SHELL_CODE_OK)
                      goto ShellCodeError
                  endif
                  set Error = $($R0)
                  Goto fatal
              Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                  Goto successful
              Endif

              Set SrcDir = $($R1)

           Endif

           install "Install-Option"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
              Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
              ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
              endif
              set Error = $($R0)
              goto fatal
           endif
        endif

        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)

        Set OEM_ABANDON_SOFTWARE = TRUE

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        ;
        ;   At this point:
        ;     $R1 contains the product version key handle;
        ;     $R2 contains the NetRules subkey handle;
        ;     $R3 contains the new Services key handle; and
        ;     $R4 contains the Parameters key
        ;     $R5 contains the Linkage Key
        ;
        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        Set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)

        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif

        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)

        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif

    endif

    ;
    ; Install Hardware component
    ;
    ForListDo $(AdapterList)
        set BusNum = *($($),1)
        set SlotNum = *($($),2)
        set McaPosId = *($($),3)
        Debug-Output $(BusNum)
        Debug-Output $(SlotNum)

        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
            $(SlotNum), $(ProductHardwareDescription), $(ProductHardwareName)

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif

        ifstr(i) $($R1) != "YES"

                ;
                ;   Create the HARDWARE\Netcard region and
                ;   its corresponding service
                ;
                Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)

                ifint $($R4) != -1
                    Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
                endif

                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif

                set RegistryErrorIndex = $($R0)

                Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                    EndWait
                    CloseRegKey $($R1)
                    CloseRegKey $($R2)
                    CloseRegKey $($R3)
                    goto fatalregistry
                endif

                ;
                ;   At this point:
                ;     $R1  Registry key variable for
                ;               HARDWARE\Netcard\(n)
                ;     $R2  Registry key variable for
                ;               HARDWARE\Netcard\(n)\\NetRules
                ;     $R3  Registry key handle for
                ;               <service>\Parameters key
                ;     $R4  Adapter number assigned to adapter
                ;     $R5  Service name generated by combining
                ;               svc name with adapter number
                ;
                Set HardNetCardKey      = $($R1)
                Set HardNetRuleKey      = $($R2)
                Set HardParameterKey    = $($R3)
                set AdapterNumber       = $($R4)

                ifint $(McaPosId) != 24863
                    set OpSupport = $(ProductOtherOpSupport)
                else
                    set OpSupport = $(ProductOpSupport)
                endif

                set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                   {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
                                   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
                                   {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                   {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(OpSupport)},+
                                   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

                Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif

                set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                                {BusType,$(NoTitle),$(!REG_VT_DWORD),3},+
                                {McaPosId,$(NoTitle),$(!REG_VT_DWORD),$(McaPosId)},+
                                {CardType,$(NoTitle),$(!REG_VT_DWORD),2},+
                                {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}}

                Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif

                ifint $(McaPosId) == 24863
                    ;
                    ; configure UB NE2000
                    ;
                    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
                        Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)
                    else
                        GetRegValue $(HardParameterKey),"InterruptNumber", InterruptNumberInfo
                        set IRQValue = *($(IRQList),~($(IRQList), *($(InterruptNumberInfo),4)))
                        GetRegValue $(HardParameterKey),"IOBaseAddress", IOBaseInfo
                        set IOBaseAddress = *($(IOBaseAddrHexList),~($(IOBaseAddrDecList), *($(IOBaseInfo),4)))
                        read-syms FileDependentDlg$(!STF_LANGUAGE)
                        ui start "Config"
                        ifstr(i) $(DLGEVENT) == "CONTINUE"
                            set IRQValue = $(Combo1Out)
                            set IOBaseAddress = $(Combo2Out)
                            set IOBaseAddrValue = *($(IOBaseAddrDecList), ~($(IOBaseAddrHexList),+
                                $(IOBaseAddress)))
                            SetRegValue $(HardParameterKey) {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)}
                            SetRegValue $(HardParameterKey) {IOBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}
                            ui pop 1
                        else
                            ui pop 1
                        endif
                    endif
                endif

                set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
                set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

                set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                                    {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                                    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                                    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

                Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)

                CloseRegKey $(HardNetCardKey)
                CloseRegKey $(HardNetRuleKey)
                CloseRegKey $(HardParameterKey)

                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
         endif
    EndForListDo

    goto writeparameters
;
;   REQUIRED:   $(KeyParameters) contains service Parameters key handle
;
writeparameters = +

    EndWait

    goto successful

;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
    set Error = "Binding: Not Implmemented yet"
    goto fatal

;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------

removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        ; Remove Software Component
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif

    goto end
    ; Shell $(UtilityInf) RemoveNetworkCardEntry, $(ProductHardwareName)
    ; ifint $($ShellCode) != $(!SHELL_CODE_OK)
    ;     goto ShellCodeError
    ; endif

;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------

UpgradeSoftware = +
    ;
    ; First determine whether we want to do upgrade or update for software
    ; or hardware component. Then we will determine whether the Mode is
    ; update or upgrade.
    ;
    ; If the same version of the product existed in the registry, we do
    ; update. Otherwise, we will do a upgrade
    ;

    ; Upgrade software component
    ;
    ; see whether the same version exist or not
    ;
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)

        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif

        ; Upgrade the version number
        ;
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}

        ;
        ; do nothing for update
        ;
        CloseRegKey $(KeyProduct)
    else
        ;
        ; Cannot Open software key, goto ERROR
        ;
        goto fatalregistry
    endif

    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" $(MAXIMUM_ALLOWED) ParamKey
    ifstr(i) $(ParamKey) != ""
        GetRegValue $(ParamKey),"McaPosId", McaPosIdInfo

        ifint *($(McaPosIdInfo),4) != 24863
            set OpSupport = $(ProductOtherOpSupport)
        else
            set OpSupport = $(ProductOpSupport)
        Endif
        CloseRegKey $(ParamKey)

        ;
        ; Enumerate all netcards installed of this type and update them
        ;
        set iSearch = 1
nextnetcard = +
        Shell $(UtilityInf), FindNextNetworkCard, $(ProductHardwareName), $(iSearch)
        set KeyNetcard = $($R0)
        set iSearch = $($R1)
        Debug-Output "OemNadEp.Inf: FindNextNetworkCard "$(KeyNetcard)","$(iSearch)
        Ifstr $(KeyNetcard) != $(KeyNull)
            Debug-Output "OemNadEp.Inf: Setting OperationsSupport value"
            SetRegValue $(KeyNetcard) {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(OpSupport)}
            CloseRegKey $(KeyNetcard)

            goto nextnetcard
        Endif
    
    Endif
    goto end
    ;
    ; End of Upgrade Software
    ;

;
;  Escape hatches
;
successful = +
    goto end

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo

    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        ; Remove Software Component
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif

    goto end

;
; warning display
;
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
;       Debug-Msg "Error Error Bad DLGEVENT"
        goto "end"
    endif


;
; non fatal error display
;
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif

;
;  Registry is broken
;
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
;
; fatal error display
;
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    goto setfailed

;
;  Shelling error
;
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    ;
    ; if OEM_ABANDON_ON == TRUE, then remove the registry entries
    ;
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end

end = +
    goto term

term = +
    Return $(CommonStatus)

;***************************************************************
;  INSTALL SECTIONS
;***************************************************************
[Install-Option]
    set STF_VITAL = ""

    ifstr(i) $(AddCopy) == "YES"

        ;
        ; Add the files to the copy list
        ;
        ;  BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
        ;      the other INF files
        ;
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers

    endif

    ifstr(i) $(DoCopy) == "YES"

       ;
       ; Copy files in the copy list
       ;
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList

    endif

    ifstr(i) $(DoConfig) == "YES"
        ;
        ; Add product to registry
        ;

        ;
        ; Finish up
    endif

    Exit

[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   ;set STF_VERSION     = "YES"

   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers

   exit