;
;NDIS 3.0 OEMSETUP.INF file for Proteon p189x ProNET-4/16 Token Ring Adapter.
;Version 1.03 (930830)
;


[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    MCA
    "Jazz-Internal Bus"
[Options]
    P189X
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"

p189x_1BYTE    = { 2, 0, 48 }
p189x_2BYTE    = { 2, 7, 1 }
NETCARD_ID      = { 514, 1792, 304 }

PacketList =^(PacketChoices,1)
PacketValue=^(PacketChoices,2)
Manufacturer    = "PROTEON"
ProductMajorVersion     = "4"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "ProNET"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\pronet16.sys"
NetRuleSoftwareType     = "proNETSys ndisDriver proNETDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """ProNETSys"" yes no container"
NetRuleSoftwareClass    = {"proNETDriver basic"}
ProductHardwareName     = "ProNET"
NetRuleHardwareType     = "p189X p189XAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"p189XAdapter basic"}
ProductOpSupport     = 134 ; 0x0086 ; Display,Removable,Properties,Not Updatable
NetRuleSoftwareBindable = {"proNETDriver p189XAdapter non exclusive 100"}
ProductKeyName  =$(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    Debug-Output "OEMSETUP.INF: STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output "OEMSETUP.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
;    Shell $(UtilityInf), GetBindingInfo, "PROTEON"
;    ifint $($ShellCode) != $(!SHELL_CODE_OK)
;        Debug-Output "ShellCode error: cannot get an error string."
;        goto ShellCodeError
;    endif
;
;    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set CommonStatus = STATUS_REBOOT
        Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
            Debug-Output "Cannot configure the Proteon ProNET RapiDriver software."
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error: cannot get an error string."
                goto ShellCodeError
            endif
            set Error = $($R0)
            set from = end
            set to = end
            goto nonfatalinfo
        endif
        set StartLabel = configureadapter
    else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
;12-14-93 PAM added next line for node address entry
        set NetworkAddress = "000000000000"
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
   Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    endif
    goto nextstep

configureadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) NetCardKey
    ifstr(i) $(NetCardKey) == ""
        set CommonStatus = STATUS_USERCANCEL
        goto successful
    endif
;
;added next line rrb
;
    GetRegValue $(NetCardKey), "ServiceName", ServiceInfo
    set ServiceName = *($(ServiceInfo),4)
    CloseRegKey $(NetCardKey)
    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" $(MAXIMUM_ALLOWED) ParamKey
    ifstr(i) $(ParamKey) != ""
;12-14-93 PAM added for node address entry
        GetRegValue $(ParamKey),"NetworkAddress", NetworkAddressInfo
        set NetworkAddress = *($(NetworkAddressInfo), 4)
;12-14-93 PAM end add
        GetRegValue $(ParamKey), "CardSpeed", CardSpeedInfo
        set CardSpeed = *($(CardSpeedInfo), 4)
        ifint $(CardSpeed) == 4
            set RadioIn = {1}
        else
            set RadioIn = {2}
        else
        endif
        read-syms FileDependentDlg$(!STF_LANGUAGE)
        ui start "InputDlg"
        ifstr(i) $(DLGEVENT) == "CONTINUE"
            ifcontains(i) 1 in $(RadioOut)
                SetRegValue $(ParamKey) {CardSpeed,$(NoTitle),$(!REG_VT_DWORD),4}
                SetRegValue $(ParamKey) {PacketSize,$(NoTitle),$(!REG_VT_DWORD),4210}
            else
                SetRegValue $(ParamKey) {CardSpeed,$(NoTitle),$(!REG_VT_DWORD),16}
                SetRegValue $(ParamKey) {PacketSize,$(NoTitle),$(!REG_VT_DWORD),17986}
            endif
;12-14-93 PAM added for node address entry
            set NetworkAddress = *($(EditTextOut),1)
            ifstr(i) $(NetworkAddress) == ""
                set NetworkAddress = "000000000000"
            endif
            SetRegValue $(ParamKey) {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)}
;12-14-93 PAM end add
            ui pop 1
        else
            set CommonStatus = STATUS_USERCANCEL
            ui pop 1
        endif
        CloseRegKey $(ParamKey)
    endif
    goto successful

nextstep = +
    StartWait

installproduct = +
    set cardlist = {}
    Shell $(UtilityInf), MCAFindBus, *($(p189x_1BYTE),1), *($(p189x_2BYTE),1)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr $($R0) != "NO_ERROR"
        set Error = $($R0)
        goto fatal
    endif
    ifstr(i) $($R1) != {}
        set cardlist = $($R1)
    endif
    Shell $(UtilityInf), MCAFindBus, *($(p189x_1BYTE),2), *($(p189x_2BYTE),2)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr $($R0) != "NO_ERROR"
        set Error = $($R0)
        goto fatal
    endif
    ifstr(i) $($R1) != {}
        ifstr(i) $(cardlist) != {}
            set cardlist = >($(cardlist),$($R1))
        else
            set cardlist = $($R1)
        endif
    endif
    Shell $(UtilityInf), MCAFindBus, *($(p189x_1BYTE),3), *($(p189x_2BYTE),3)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr $($R0) != "NO_ERROR"
        set Error = $($R0)
        goto fatal
    endif
    ifstr(i) $($R1) != {}
        ifstr(i) $(cardlist) != {}
            set cardlist = >($(cardlist),$($R1))
        else
            set cardlist = $($R1)
        endif
    endif
    ifstr(i) $(cardlist) == {}
        set Error = $(CANNOT_FIND_ANY_CARD)
        set CommonStatus = STATUS_USERCANCEL
        set from = "end"
        goto nonfatal
    endif
    set AdapterList = $(cardlist)
    ifint $(OldVersionExisted) == $(FALSE)
        ifstr(i) $(!NTN_InstallMode) == "install"
           Ifstr(i) $(DoCopy) == "YES"
              Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
              Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  Goto ShellCodeError
              Else-Ifstr(i) $($R0) == STATUS_FAILED
                  Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                  ifint $($ShellCode) != $(!SHELL_CODE_OK)
                      goto ShellCodeError
                  endif
                  set Error = $($R0)
                  Goto fatal
              Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                  Goto successful
              Endif
              Set SrcDir = $($R1)
           Endif
           install "Install-Option"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
              Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
              ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
              endif
              set Error = $($R0)
              goto fatal
           endif
        endif
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        Set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+

{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+

{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+

{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+

{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+

{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+

{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif
    endif

    ForListDo $(AdapterList)
        set BusNum = *($($),1)
        set SlotNum = *($($),2)
        set McaPosId = *($($),3)
        Debug-Output $(BusNum)
        Debug-Output $(SlotNum)
        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
            $(SlotNum), $(ProductHardwareDescription), $(ProductHardwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif
        ifstr(i) $($R1) != "YES"
                Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
                ifint $($R4) != -1
                    Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
                endif
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                    EndWait
                    CloseRegKey $($R1)
                    CloseRegKey $($R2)
                    CloseRegKey $($R3)
                    goto fatalregistry
                endif
                Set HardNetCardKey      = $($R1)
                Set HardNetRuleKey      = $($R2)
                Set HardParameterKey    = $($R3)
                set AdapterNumber       = $($R4)
                set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
               Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                read-syms FileDependentDlg$(!STF_LANGUAGE)
                set RadioIn = {1}
                ui start "InputDlg"

;12-14-93 PAM added for node address entry
                ifcontains(i) 1 in $(RadioOut)
                    set CardSpeed = 4
                    set Packet_Number = 4210
                else
                    set CardSpeed = 16
                    set Packet_Number = 17986
                endif
                set NetworkAddress = *($(EditTextOut),1)
                ifstr(i) $(NetworkAddress) == ""
                    set NetworkAddress = "000000000000"
                endif
;12-14-93 PAM end add
                ui pop 1

                Shell $(UtilityInf), GetBusTypeNum
                set BusTypeNum = $($R1)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    Debug-Output "ShellCode error."
                    goto ShellCodeError
                endif

;12-14-93 PAM added line with NetworkAddress for node address entry
                set NewValueList = {{CardType,$(NoTitle),$(!REG_VT_DWORD),2},+
                                   {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                   {McaPosId,$(NoTitle),$(!REG_VT_DWORD),$(McaPosId)},+
                                   {MediaType,$(NoTitle),$(!REG_VT_DWORD),2},+
                                   {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
{PacketSize,$(NoTitle),$(!REG_VT_DWORD),$(Packet_Number)},+
{CardSpeed,$(NoTitle),$(!REG_VT_DWORD),$(CardSpeed)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}}
                Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif

                ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
                    Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)
                endif

                set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
                set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
                set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
               Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                CloseRegKey $(HardNetCardKey)
                CloseRegKey $(HardNetRuleKey)
                CloseRegKey $(HardParameterKey)
        endif
    EndForListDo

    goto writeparameters
writeparameters = +
    EndWait
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
UpgradeSoftware = +
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) != $(KeyNull)
            GetRegValue $(KeyProduct), "MajorVersion", VersionInfo
            set Version = *($(VersionInfo), 4)
            Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
            endif
            set !UG_Filename = $($R0)
            ifstr(i) $(!UG_Filename) != ""
                install "Install-Update"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    goto fatal
                endif
            endif
            SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
            SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
            ifint $(Version) != $(ProductVersion)
            endif
            CloseRegKey $(KeyProduct)
        else
            goto fatalregistry
        endif
    else
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
              $(MAXIMUM_ALLOWED) NetworkCardKey
        Ifstr(i) $(NetworkCardKey) != $(KeyNull)

            GetRegValue $(NetworkCardKey), "ServiceName", ServiceNameInfo

            set ServiceName = *($(ServiceNameInfo), 4)
            OpenRegKey $(NetworkCardKey) "" "NetRules" +
                $(MAXIMUM_ALLOWED) NetRuleKey
            Ifstr(i) $(NetRuleKey) != $(KeyNull)
            else
                goto fatalregistry
            endif
            CloseRegKey $(NetRules)
            CloseRegKey $(NetworkCardKey)
        else
            goto fatalregistry
        endif
        OpenRegKey $(!REG_H_LOCAL) "" +
              $(!NTN_ServiceBase)"\"$(ServiceName) +
              $(MAXIMUM_ALLOWED) ServiceKey
        Ifstr(i) $(ServiceKey) != $(KeyNull)
            CloseRegKey $(ServiceKey)
        else
            goto fatalregistry
        endif
    endif

    ;
    ; Enumerate all netcards installed of this type and update them
    ;
    set iSearch = 1
nextnetcard = +
    Shell $(UtilityInf), FindNextNetworkCard, $(ProductHardwareName), $(iSearch)
    set KeyNetcard = $($R0)
    set iSearch = $($R1)
    Debug-Output "OemNadEp.Inf: FindNextNetworkCard "$(KeyNetcard)","$(iSearch)
    Ifstr $(KeyNetcard) != $(KeyNull)
        Debug-Output "OemNadEp.Inf: Setting OperationsSupport value"
        SetRegValue $(KeyNetcard) {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)}
        CloseRegKey $(KeyNetcard)

        goto nextnetcard
    Endif

    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit