#####oemnadlm.inf all
[LanguagesSupported]
ENG

[OptionsTextENG]
LT200MC   = "COPS/DayStar Digital LocalTalk Adapter (MCA)"

[FileConstantsENG]

ProCaption              = "LocalTalk Adapter Setup"
ProCancel               = "Cancel"
ProCancelMsg    = "LocalTalk Adapter is not correctly installed. "+
                  "Are you sure you want to cancel copying files ?"
ProCancelCap    = "Network Setup Message"
ProText1                = "Copying:"
ProText2        = "To:"
Error           = "User has canceled copying files. Copied files will be removed."

FunctionTitle                   = "DayStar Digital LocalTalk Adapter Card Setup"
ProductSoftwareDescription      = "DayStar Digital LocalTalk Adapter Driver"
ProductHardwareDescription      = "DayStar Digital LocalTalk Adapter"

AskLocationText = "Setup needs to copy LocalTalk Adapter files."$(!LF)$(!LF)+
                  "Setup will look for the files in the location specified below. If you want "+
                  "Setup to look in a different place, type the new location. When the location "+
                  "is correct, click Continue."

MajorVersion    = "MajorVersion"
MinorVersion    = "MinorVersion"
Version                 = "Version "

ProductSoftwareTitle    =  "Daystar Digital LocalTalk Adapter Driver"
ProductHardwareTitle    =  "DayStar Digital LocalTalk Adapter"

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[MiscErrorString1ENG]
ErrorString = +
" of the LocalTalk adapter driver is already installed in your system. "+
"Use [Update] to update to newer versions."

[MiscErrorString2ENG]
ErrorString = +
"A LocalTalk adapter could not be found in your system. Please "+
"check your system configuration."

[MiscErrorString3ENG]
ErrorString = +
"Setup encountered the following error during installation. Try installing the "+
"LocalTalk Adapter after rebooting your system. "$(LF)

[NoConfigENG]
ErrorString = +
"This adapter does not have any configurable parameters."

[StatusRemove1ENG]
Status = "Removing LocalTalk Adapter files..."


[ShellingErrorENG]
ErrorString  = +
"An internal error occurred. Contact Technical Support."


#####oemnadlt.inf all
[LanguagesSupported]
   ENG
[OptionsTextENG]
   LT200     = "COPS/DayStar Digital LocalTalk Adapter"

[FileConstantsENG]
ProCaption      = "LocalTalk Adapter Setup"
ProCancel       = "Cancel"
ProCancelMsg    = "LT200 LocalTalk Adapter is not correctly installed. "+
                  "Are you sure you want to cancel copying files ?"
ProCancelCap    = "Network Setup Message"
ProText1        = "Copying:"
ProText2        = "To:"
Error           = "User has cancelled copying files. Copied files will be removed."

FunctionTitle                   = "DayStar Digital LocalTalk Adapter Card Setup"
ProductSoftwareDescription      = "DayStar Digital LocalTalk Adapter Driver"
ProductHardwareDescription  = "DayStar Digital LocalTalk Adapter"

AskLocationText = "Setup needs to copy LocalTalk Adapter files."$(!LF)$(!LF)+
                  "Setup will look for the files in the location specified below. If you want "+
                  "Setup to look in a different place, type the new location. When the location "+
                  "is correct, click Continue."

MajorVersion = "MajorVersion"
MinorVersion = "MinorVersion"
Version          = "Version "

IOBaseAddrList          = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues        = ^(IOBaseAddrChoices, 2)
ProductSoftwareTitle    = "Daystar Digital LocalTalk Adapter Driver"
ProductHardwareTitle    = "DayStar Digital LocalTalk Adapter"


[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "OK"
Cancel      = "Cancel"

[FileDependentDlgENG]
Label1      = "I/O Base &Addr:"

;no translation needed after this

DlgType                 = "MultiCombo"
DlgTemplate             = "SINGLE_COMBO"
Caption                 = $(FunctionTitle)
Combo1List              = $(IOBaseAddrList)
Combo1Out               = $(IOBaseAddrValue)
ComboListItemsIn                = {Combo1List}
ComboListItemsOut               = {Combo1Out}
HelpContext                     = $(!IDH_DB_OEMNADLT_INS)


[MiscErrorString1ENG]
ErrorString = +
" of the LocalTalk adapter driver is already installed in your system. "+
"Use [Update] to update to newer versions."


[MiscErrorString3ENG]
ErrorString = +
"Setup encountered the following error during installation. Try installing the "+
"LocalTalk Adapter after rebooting your system. "$(!LF)

[ShellingErrorENG]
ErrorString  = +
"An internal error occurred. Contact Technical Support."

#####oemnsvra.inf all
[LanguagesSupported]

    ENG

[OptionsTextENG]

    RAS = "Routing And Remote Access Service"

;***********************************************************************
; Language-Dependent File Constants
;***********************************************************************

[FileConstantsENG]

    ; variables to create the Remote Access Program group

    RasGroup    = "Remote Access Service"
    RasPhone    = "Remote Access"

    RasMon      = "Remote Access Monitor"
    RasAdmin    = "Remote Access Admin"

    ReadMe      = "Read Me"
    RasInternet = "Remote Access and the Internet"
    RasHelp     = "Remote Access Help"

    AdminGroup  = "Administrative Tools"
    RtrAdmin    = "Routing and RAS Admin"

    ; Variables to support thermometer gauge and error dialogs

    ProCaption   = "Routing and Remote Access Service Setup"
    ProCancel    = "Cance&l"
    ProCancelMsg = "Remote Access Service is not correctly installed. "+
                   "Are you sure you want to cancel copying files?"
    ProCancelCap = "Routing and Remote Access Service Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"
    Error        = "Unable to determine proper source disk location; copy cannot be performed."

    ; Product Info

    FunctionTitle   ="Routing and Remote Access Setup"

    ; Software description
    ; Note that some variable names start with '!'.  This is intentional
    ; and required.  Do not remove them!!

    ProductRASDescription                = "Enables users to use Windows NT Server as an IP or IPX router."
    ProductRASTitle                      = "Routing And Remote Access Service"
    ProductRASDisplayName                = "Routing And Remote Access Service"

    ProductRASMANDescription             = "Windows NT Remote Access Connection Manager"
    ProductRASMANTitle                   = "Remote Access Connection Manager"
    ProductRASMANDisplayName             = "Remote Access Connection Manager"

    !ProductRASAUTODIALDescription       = "Windows NT Remote Access Autodial Manager"
    !ProductRASAUTODIALDisplayName       = "Remote Access Autodial Manager"
    !ProductRASAUTODIALTitle             = "Remote Access Autodial Manager"

    !ProductNDISWANDescription           = "Windows NT Remote Access WAN Wrapper"
    !ProductNDISWANTitle                 = "Remote Access WAN Wrapper"
    !ProductNDISWANDisplayName           = "Remote Access WAN Wrapper"

    ProductRASASYMACDescription          = "Windows NT Remote Access AsyMac Adapter Driver"
    ProductRASASYMACTitle                = "Remote Access Mac"
    ProductRASASYMACDisplayName          = "Remote Access Mac"

    ProductRASSVRDescription             = "Windows NT Remote Access NetBios Gateway"
    ProductRASSVRTitle                   = "Remote Access Server Service"
    ProductRASSVRDisplayName             = "Remote Access Server"

    !ProductROUTINGDescription           = "Enables users to use Windows NT Server as an IP or IPX router."
    !ProductROUTINGTitle                 = "Routing And Remote Access Service"
    !ProductROUTINGDisplayName           = "Routing And Remote Access Service"

    !ProductRASISNRIPTitle               = "Remote Access NWLNKRIP Service"
    !ProductRASISNRIPDisplayName         = "Remote Access NWLNKRIP Service"

    !ProductRASISNSAPTitle               = "Remote Access NWLNKSAP Service"
    !ProductRASISNSAPDisplayName         = "Remote Access NWLNKSAP Service"

    !ProductRASARPTitle                  = "Remote Access ARP Service"
    !ProductRASARPDisplayName            = "Remote Access ARP Service"

    !ProductRASACDDisplayName            = "Remote Access Auto Connection Driver"

    !ProductWANARPDisplayName            = "IP WanArp Driver"

    !ProductIPFLTDisplayName             = "IP Filter Driver"

    !ProductIPXPINGDisplayName           = "IPX Ping Service"

    !ProductNWLNKFWDDisplayName          = "NWLink Forwarder"

    !ProductNWLNKFLTDisplayName          = "NWLink Traffic Filter"

    !ProductNDISTAPIDisplayName          = "Microsoft NDIS TAPI driver"

;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************

[DialogConstantsENG]

    ; Common button names, etc.

    Help        = "&Help"
    Exit        = "E&xit"
    OK          = "OK"
    HelpContext = ""
    Continue    = "C&ontinue"
    Cancel      = "C&ancel"

[ExitWarningDlgENG]
    DlgType      = "MessageBox"
    STF_MB_TITLE = "Routing and Remote Access Service Setup"
    STF_MB_TYPE  = 3
    STF_MB_ICON  = 5
    STF_MB_DEF   = 2

[SetupAbortDlgENG]
    DlgType     = "Info"
    DlgTemplate = "RESTART"
    Caption     = "Routing and Remote Access Service Setup"
    DlgText     = "Setup for Routing and Remote Access Service failed."$(!LF)$(!LF)+
                  "Please choose Exit to exit back to the Windows NT System."
    Windows     = "E&xit to &Windows NT"

[AbortMessageENG]
  AbortText  =  "Aborting Remote Access Setup. Please restart the system "+
                "to fix the problem."

[ShellCodeErrorMsgENG]
    DlgType      = "MessageBox"
    STF_MB_TITLE = "Error: "$(FunctionTitle)
    STF_MB_TEXT  = "An error occured running the shell command. "+
                   "Please restart the system to fix the problem."
    STF_MB_TYPE  = 1
    STF_MB_ICON  = 3
    STF_MB_DEF   = 1

[SuccessfulInstallENG]
  Success  = "Routing and Remote Access Service has been successfully installed. "$(!LF)$(!LF)+
             "You can use Routing and RAS Admin to add Routing protocols and to change the router configuration. "+
             "You can use User Manager to assign Remote Access permissions to dial-in users."$(!LF)+
             "You can find these programs in the Administrative Tools (Common) folder."

[MsgDlgENG]
    DlgType      = "MessageBox"
    STF_MB_TYPE  = 1
    STF_MB_ICON  = 2
    STF_MB_DEF   = 2

;;;;;;;;   Status and Error messages ;;;;;;;;;;

[StatusUpdatingRegistryENG]
    CreatingRas             = "Please wait while Routing and Remote Access service is installed..."
    WritingRasParams        = "Writing registry parameters..."
    WritingRasParamsAdd     = "Writing registry parameters...adding binding "
    WritingRasParamsRemove  = "Writing registry parameters...removing binding "
    RemovingRas             = "Removing Routing and Remote Access Service..."
    RemovingAdapters        = "Routing and Remote Access Setup: removing binding "
    RemovingFiles           = "Removing Routing and Remote Access files..."
    RemovingServices        = "Removing Routing and Remote Access Services..."
    UpdatingRas             = "Please wait while Routing and Remote Access service is updated..."

[StatusDeterminingConfigENG]
    ReadingConfig      = "Determining current configuration ..."

[StatusCopyingResENG]
    Status = "Copying DLLs and INF files to disk ..."

[NonFatalError1ENG]
    NonFatal  = "Setup cannot function properly without a user name."

[FatalErrorMemENG]
    Fatal  = "Not enough memory is available. Remote Access requires atleast 2 Meg."

[NoConfigLANENG]
    NoConfigLanRouting = "To configure Routing use RTRADMIN. To install RAS click add and choose Routing and Remote Access Service"

[VerExistsENG]
    Ver   = " version "
    Text1 = " is already installed. "

[NetworkConfigErrorENG]
    Text1 = "Setup encountered an error while determining the "+
            "network configuration.  Please make sure that "+
            "the network is properly configured before attempting "+
            "to install Remote Access Service."

    Text2 = "The Microsoft Windows Workstation and Server Service must be "+
            "installed for proper operation of Remote Access Service."$(!LF)$(!LF)+
            "To install Workstation or Server Service:"$(!LF)$(!LF)+
            "1. Invoke 'Network' control panel applet."$(!LF)+
            "2. Choose Add Software and select Workstation or Server from the list."

[NoPortsConfiguredENG]
   NoPortsError =+
       "Remote Access is not configured with any ports. "+
       "You have an invalid RAS configuration. "+
       "Please configure Remote Access Service and add "+
       "ports using the Network option in Control Panel "+
       "after restarting the system."

[QueryInstalledProtocolsErrorENG]
    Text  = "Setup encountered an error while determining the "+
            "installed network protocols.  Try restarting the "+
            "system to correct the problem. Contact your system "+
            "administrator, if the problem persists."

[RasUpgradeENG]
    Ver = " ver "
    Text1 = " exists on the system. Are you sure you want to upgrade to"
    Text2 = "?. "
    Text3 = "Selecting YES will result in the new version replacing the old."

[InstallLoopbackENG]
Message = "RAS Setup has discovered that you have configured one or more "+
          "ports to receive calls and your computer does not have a "+
          "network adapter installed. Setup will install the MS Loopback "+
          "Adapter to enable remote clients to use resources on this computer."

Error   = "RAS setup encountered an error while invoking the OEMNADLB.INF file "+
          "to install the MS Loopback Adapter. You can install the Loopback Adapter "+
          "from the Network option in Control Panel after restarting the system. "+
          "Remote Clients will not be able to dialin and use resources on this computer "+
          "till you install the Loopback Adapter."

[NoNetbeuiDlgENG]
    NoNetbeuiWarning =+
        "The NetBEUI protocol is either not installed or not configured "+
        "for Remote Access.  NetBEUI provides the fastest throughput to "+
        "NetBIOS resources when accessed over a Remote Access connection. "+
        "If clients will access remote NetBIOS resources, configure RAS "+
        "to use NetBEUI. "$(!LF)$(!LF)+
        "You can add the NetBEUI protocol to your computer using the "+
        "Network option in Control Panel."

[NoProtocolsDlgENG]
    NoProtocolsWarning =+
       "Remote Access is not configured with any network protocols. "+
       "You have an invalid RAS configuration. "+
       "You can configure RAS to support "+
       "network protocols using the Network option in Control Panel "+
       "after restarting the system."

[UpgradeErrorsENG]
UpgradeIsdnInfoError = "Remote Access Setup encoutered an error while "+
                       "updating the ISDN information. Please remove and "+
                       "reinstall Remote Access to ensure proper operation."

[RasErrorsENG]
ErrorBadArgs = "OEMNSVRA.INF specified invalid number of arguments "+
               "to RASCFG.DLL. Remote Access Setup will terminate now."

ErrorNoPorts = "Dial-Up Networking setup failed to detect any installed "+
               "ports on this computer. Setup will terminate now."

ErrorUnknown = "Dial-Up Networking setup encountered an unknown failure "+
               "and will terminate now. Please contact your administrator "+
               "to deteremine the cause of the problem."

InvalidMode  = "Dial-Up Networking setup was invoked with an invalid "+
               "RasInstallMode environment variable. It should be set to "+
               "either install or configure. The value currently passed to "+
               "setup is "$(RasInstallMode)"."

UnableToLoadSetupdll = "Dial-Up Networking setup was unable to load setupdll.dll "+
                       "in the system32 directory. Please make sure this file is "+
                       "present on your computer. Setup will now exit. "

UnableToLoadNcpaCpl = "Dial-Up Networking setup was unable to load ncpa.cpl "+
                       "in the system32 directory. Please make sure this file is "+
                       "present on your computer. Setup will now exit. "

NoProductType = "Dial-Up Networking setup was unable to determine your "+
                "computer product type. Make sure that the following registry "+
                "value exists on your computer. "+
                "HEKY_LOCAL_MACHINE\System\CurrentControlSet\Control\ProductOptions. "+
                "Setup will now exit."

UnknownProductType = "Dial-Up Networking setup detected an unsupported product type "$(TempProductType)". "+
                     "Make sure that the following registry value HEKY_LOCAL_MACHINE\System\CurrentControlSet\Control\ProductOptions\ProductType "+
                     "is one of the following valid values WinNT, LanManNT or ServerNT. Setup will now exit."

RemoveRasFirst = "For this beta release, you must first remove your installation "+
                 "of Remote Accesss Service and the following MPR components (if installed) - "+
                 "RIP for IPX, SAP Agent, RIP for Internet and DHCP relay agent "+
                 "before installing Routing and Remote Access Service."

ErrorAddingRtrMgr = "An error occured while adding a Routing Manager. Your configuration is bad. Remove and reinstall to fix the problem."

ErrorConfigInterfaces = "An error occured while adding/removing LAN interfaces. Your configuration is bad. Remove and reinstall to fix the problem."

ErrorSnmpRunning = "SNMP service is currently running on the server. This prevents setup from copying snmp sub-agent files. Please stop SNMP service before running setup again."

ErrorLoadingConfigDll = "Setup can not start due the following missing file(s) in your system32 directory - "

No40WkstaInstall = "You can not install this service on a Windows NT 4.0 Workstation product. Please install this service on a Windows NT 4.0 Server product."

; bill board messages

[Billboard1ENG]
Status = "Routing and remote Access Setup is installing the NetBEUI transport..."

[Billboard2ENG]
Status = "Routing and remote Access Setup is installing the TCP/IP transport..."

[Billboard3ENG]
Status = "Routing and remote Access Setup is installing NWLINK and related services..."