;***********************************************************************
;
; OEMNADAM.INF
;
;       PCNET Family network card and driver SETUP INF file.
;
; History:
;***********************************************************************

;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with.  The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
;  Types specific to networking:
;
; NetAdapter,        a netcard / adapter combination or just a netcard
; NetDriver,         just a netcard driver
; NetTransport,      a complete NDIS-compliant TDI transport stack
; NetService,        an NT networking service
; NetWork,           a complete network ensemble.
; NetProvider        a complete network which supports NT MPR protocol
;-----------------------------------------------------------------------

[Identification]
    OptionType = NetAdapter

;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA and EISA
;-----------------------------------------------------------------------

[PlatformsSupported]
    ISA
    EISA
    PCI

;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names.  These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------

[Options]
    AMDPCI

;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************

[FileConstants]

GenericInfVersion  = " v3.11"
GenericSysName     = "amdpcn.sys"
GenericName        = "AMDPCN"

;
;  File names, etc.
;
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0

;
; EventLog Message File
;
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"

; Product Info
;
Manufacturer    = "Microsoft"
ProductMajorVersion     = "4"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

;
; Software
;
ProductSoftwareName     = "AMDPCN"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType     = "pcntn3Sys ndisDriver pcntn3Driver"

NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """pcntn3Sys"" yes no container"

NetRuleSoftwareClass    = {"pcntn3Driver basic"}
NetRuleSoftwareBindable = {"pcntn3Driver pcntn3Adapter non exclusive 100"}

;
; Hardware
;
ProductHardwareName        = "AMDPCN"
NetRuleHardwareType        = "pcntn3 pcntn3Adapter"
NetRuleHardwareBindForm    = " yes yes container"
NetRuleHardwareClass       = {"pcntn3Adapter basic"}
ProductOpSupport     = 134 ; 0x0086 ; Display,Removable,Properties,Not Updatable


;
; Registry Key
;
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"


[GeneralConstants]
;
;  Program flow control variables.
;
from      = ""
to        = ""
;
;  Return codes; Exit_Code is set to one of these
;
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2

KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""

TRUE            = 1
FALSE           = 0
NoTitle         = 0

ExitState   = "Active"
OldVersionExisted = $(FALSE)

DriverPath      = $(!STF_NTPATH)\drivers

[date]
    ; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
    ; Minute, Second }
    Now = {} ? $(!LIBHANDLE) GetSystemDate


;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION:   To verify that this INF deals with the same type of options
;                as we are choosing currently.
;
; INPUT:         None
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL
;                $($R1): Option Type (COMPUTER ...)
;                $($R2): Diskette description
;---------------------------------------------------------------------------

[Identify]
    ;
    ;
    read-syms Identification

    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)

    Return $(Status) $(Identifier) $(Media)

;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION:   To return the option list supported by this INF and the
;                localised text list representing the options.
;
;
; INPUT:         $($0):  Language used. ( ENG | FRN | ... )
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL |
;                                STATUS_NOLANGUAGE
;                                STATUS_FAILED
;                                STATUS_NOTSUPPORTED
;
;                $($R1): Option List
;                $($R2): Option Text List
;------------------------------------------------------------------------

[ReturnOptions]
    ;
    ;
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	;
	; Check if the platforms requested is supported
	;
	ifstr(i) $($1) == ""
			goto returnoptions
	endif

	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
			goto returnoptions
	else
			set Status = STATUS_NOTSUPPORTED
			goto finish_ReturnOptions
	endif
    else
		set Status = STATUS_NOLANGUAGE
		goto finish_ReturnOptions
    endif

    ;
    ; form a list of all the options and another of the text representing
    ;

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

;------------------------------------------------------------------------
;
; InstallOption:
;
;      This section is shelled to by main installation processing
;      or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION:  To copy files representing Options
;            To configure the installed option
;            To update the registry for the installed option
;
; INPUT:     $($0):  Language to use
;            $($1):  OptionID to install
;            $($2):  SourceDirectory
;            $($3):  AddCopy  (YES | NO)
;            $($4):  DoCopy   (YES | NO)
;            $($5):  DoConfig (YES | NO)
;
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;                            STATUS_NOLANGUAGE |
;                            STATUS_USERCANCEL |
;                            STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
    ;
    ; Set default values for
    ;
    set Status   = STATUS_FAILED
    ;
    ; extract parameters
    ;
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif

    set-subst LF = "\n"

    read-syms GeneralConstants
    read-syms FileConstants
    read-syms FileConstants$(!STF_LANGUAGE)

    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = $(OK)
    endif

    detect date

    set-title  $(FunctionTitle)

    set to   = Begin
    set from = Begin
;
;  Assume all is well.
;
    set CommonStatus = STATUS_SUCCESSFUL

    EndWait

;
;   Set up the operation-mode-based variables and gaily welcome
;   the user.  If the "install mode" variable is improperly set,
;   assume this is a new installation.
;

Begin = +
    Set ActivateDetection = FALSE

    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
;        set ActivateDetection = TRUE
	set StartLabel = configureadapter
	;
	;   You cannot config the software component
	;
	Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	    Debug-Output "Cannot configure the PCNet family driver software."
	    Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error: cannot get an error string."
		goto ShellCodeError
	    endif
	    set Error = $($R0)
	    set from = end
	    set to = end
	    goto nonfatalinfo
	endif
    else
;        set ActivateDetection = TRUE
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
    endif



    ;  set the default values

    ; IRQ Level = 3
    ; IRQ Level = Auto_Scan
    set IRQValue = *($(IRQList), 9)

    ; IOBase Address = 0x300
    ; IOBase Address = Auto_Scan
    set IOBaseAddrValue = *($(IOBaseAddrList), 17)

    ; DMAChannel = 5
    ; DMAChannel = Auto_Scan
    set DMAChannelValue = *($(DMAChannelList), 5)

    set RadioIn  = {4}
    set BusScanValue = "ALL"
    set LED0Value = *($(LEDList), 1)
    set LED1Value = *($(LEDList), 1)
    set LED2Value = *($(LEDList), 1)
    set LED3Value = *($(LEDList), 1)
    set TPValue = 1
    set FullDuplexValue = *($(FullDuplexList), 4)
    set BusTimerValue = *($(BusTimerList), 10)


    Set from = $(fatal)
    Set to = $(fatal)
    Goto $(StartLabel)

;-----------------------------------------------
; Installation Section
;-----------------------------------------------

installadapter = +
	set IsISA = 0
	set Vendor = 4130
	set CardID = 8192
	Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CardID)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set AdapterList = $($R0)
        set NewAdapterList = {}
	set NumNew = 0
	ForListDo $(AdapterList)
	    ; make sure that all the adapters are new
	    set BusNumber = *($($),1)
	    set SlotNum = *($($),2)
	    Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNumber), +
		$(SlotNum), $(GenericPCIAdapterName), $(ProductHardwareName)
	    ifstr(i) $($R1) != "YES"
		    set-add NumNew = $(NumNew),1
		    ifstr(i) $(NewAdapterList) == {}
	            set NewAdapterList = {$($)}
            else
		        set NewAdapterList = >($(NewAdapterList),$($))
            endif
	    endif
	EndForListDo
	set AdapterList = $(NewAdapterList)
	ifint $(NumNew) == 0
	    set AdapterList = {{0,0,0}}
	    set IsISA = 1
	endif
	debug-output $(AdapterList)
;
;   First, check whether the same version of the software exists
;
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)
	;
	; Same version already existed in the local machine
	; Popup the dialog and ask the user whether he wants to continue
	;
	CloseRegKey $(KeyProduct)

	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   ;
	   ; Cannot Install the same software again
	   ;
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif

	   goto end
	else
	   ;
	   ; Add a new adapter card?
	   ;
	   Shell $(UtilityInf), CardExistedDlg

	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif

	   ifstr(i) $($R1) != "OK"
	       goto end
	   endif
	   set OldVersionExisted = $(TRUE)
	endif
    endif

    ; If we're installing a second time, don't re-copy the help file
    ; !!!
    ifint $(OldVersionExisted) == $(FALSE)
	ifstr(i) $(!NTN_InstallMode) == "install"
	   Ifstr(i) $(DoCopy) == "YES"
		Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
	
		Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    Goto ShellCodeError
		Else-Ifstr(i) $($R0) == STATUS_FAILED
		    Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
		    ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		    endif
		    set Error = $($R0)
		    Goto fatal
		Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
		    Goto successful
		Endif

		Set SrcDir = $($R1)
	    endif

	    install "Install-Helpfile"
	endif
    endif

    SetHelpFile "pcnet.hlp" 1 11

;
;  dll load addition
;
    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES

    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Goto ShellCodeError
    Else-Ifstr(i) $($R0) == STATUS_FAILED
	Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
	Goto fatal
    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	Goto successful
    Endif

    Set SrcDir = $($R1)

    install "Install-Dll"

    goto adaptersetup

;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
;   Get the current values of all the parameters
;
configureadapter = +

    SetHelpFile "pcnet.hlp" 1 11

    Ifstr $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	    Debug-Output "Cannot find component product key"
	    goto fatalregistry
	Endif
    Endif

    ;
    ; Get the other parameters;  they're attached to the service parameters key
    ;
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "INF: FindService shell failure"
	Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
	Debug-Output "INF: FindService Shell error: "$($R0)
	Goto fatalregistry
    endif

    Set KeyParameters = $($R2)

    ;
    ;  We don't need the services key, so close it.
    ;
    CloseRegKey $($R1)

    Ifstr $(KeyParameters) == $(KeyNull)
	set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	Debug-Output "Cannot find component service"
	goto fatalregistry
    endif

    set OldVersionExisted = $(TRUE)

    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}

    ;
    ; Get the old values
    ;
    EnumRegValue $(KeyParameters) ValueList

    ForListDo $(ValueList)
	set ValueItem = $($)
	set ValueName = *($(ValueItem),1)
	set ValueData = *($(ValueItem),4)
	ifstr(i) $(ValueName) == "BUS_TO_SCAN"
	    set BusScanValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "TP"
	    set TPValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "LED0"
	    set LED0Value = $(ValueData)
	else-ifstr(i) $(ValueName) == "LED1"
	    set LED1Value = $(ValueData)
	else-ifstr(i) $(ValueName) == "LED2"
	    set LED2Value = $(ValueData)
	else-ifstr(i) $(ValueName) == "LED3"
	    set LED3Value = $(ValueData)
	else-ifstr(i) $(ValueName) == "IOBaseAddress"
	    set IOBaseAddrValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "InterruptNumber"
	    set IRQValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "DMAChannel"
	    set DMAChannelValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "FDUP"
	    set FullDuplexValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "BUSTIMER"
	    set BusTimerValue = $(ValueData)
	else-ifstr(i) $(ValueName) == "BusType"
	    set BusInterfaceType = $(ValueData)
        ifint $(BusInterfaceType) == 5
            set IsISA = 0
        else
            set IsISA = 1
        endif
	else-ifstr(i) $(ValueName) == "BusNumber"
	    set BusNumber = $(ValueData)
	endif

    EndForListDo

    Ifint $(TPValue) == 0
	Set CheckItemsIn = {"OFF"}
    Else
	Set CheckItemsIn = {"ON"}
    Endif

    ; set the Radio Buttons depending on the bustype in the reg.

    Ifstr $(BusScanValue) == "PNP"
	Set RadioIn = {1}
    Else-Ifstr $(BusScanValue) == "VESA"
	Set RadioIn = {2}
    Else-Ifstr $(BusScanValue) == "ISA"
	Set RadioIn = {3}
    Else-Ifstr $(BusScanValue) == "ALL"
	Set RadioIn = {4}
    Else-Ifstr $(BusScanValue) == ""
	Set RadioIn = {4}
    Endif

    Debug-Output $(InfName)" TP is "$(TPValue)

;;;;;;;;; Not needed for PCI Adapters!!

ifint $(IsISA) == 1
	; Isa

    set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValue)))
    ifstr(i) $(IRQValue) == ""
	set IRQValue = *($(IRQList), 2)
    endif

    Debug-Output $(InfName)" IRQ_Level is "$(IRQValue)

    set DMAChannelValue = *($(DMAChannelList), ~($(DMAChannelValues),$(DMAChannelValue)))
    ifstr(i) $(DMAChannelValue) == ""
	set DMAChannelValue = *($(DMAChannelList), 2)
    endif

    Debug-Output $(InfName)" DMA is "$(DMAChannelValue)

    set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrValue)))

    ifstr(i) $(IOBaseAddrValue) == ""
	set IOBaseAddrValue = *($(IOBaseAddrList), 1)
    endif

    Debug-Output $(InfName)" I/o base is "$(IOBaseAddrValue)

endif

;;;;;;;;; End of Change!!

    set LED0Value = *($(LEDList), ~($(LEDValues),$(LED0Value)))

    ifstr(i) $(LED0Value) == ""
	set LED0Value = *($(LEDList), 1)
    endif

    Debug-Output $(InfName)" LED0 is "$(LED0Value)

    set LED1Value = *($(LEDList), ~($(LEDValues),$(LED1Value)))

    ifstr(i) $(LED1Value) == ""
	set LED1Value = *($(LEDList), 1)
    endif

    Debug-Output $(InfName)" LED1 is "$(LED1Value)

    set LED2Value = *($(LEDList), ~($(LEDValues),$(LED2Value)))

    ifstr(i) $(LED2Value) == ""
	set LED2Value = *($(LEDList), 1)
    endif

    Debug-Output $(InfName)" LED2 is "$(LED0Value)

    set LED3Value = *($(LEDList), ~($(LEDValues),$(LED3Value)))

    ifstr(i) $(LED3Value) == ""
	set LED3Value = *($(LEDList), 1)
    endif

    Debug-Output $(InfName)" LED3 is "$(LED3Value)

    set FullDuplexValue = *($(FullDuplexList), ~($(FullDuplexValues),$(FullDuplexValue)))

    ifstr(i) $(FullDuplexValue) == ""
	set FullDuplexValue = *($(FullDuplexList), 1)
    endif

    Debug-Output $(InfName)" Full Duplex is "$(FullDuplexValue)

    set BusTimerValue = *($(BusTimerList), ~($(BusTimerValues),$(BusTimerValue)))

    ifstr(i) $(BusTimerValue) == ""
	set BusTimerValue = *($(BusTimerList), 1)
    endif

    Debug-Output $(InfName)" Bus Timer is "$(BusTimerValue)



;    Shell $(ParamInf) Param_SaveValues
;    Set CurrParamSettings = $($R0)
;
;   Put up the adapter configuration dialog if necessary.
;
;   Note that $(CurrParamSettings) has the old known parameter values.
;
adaptersetup = +


;    Shell "" DebugConfiguration "before displaying dialog"

    Set from = adapteroptions


adapteroptions = +


    LoadLibrary "x" $(!STF_CWDDIR)\$(DialogDllName) hLib

ifint $(IsISA) == 0
	; pci
    read-syms FileDependentDlgPCI$(!STF_LANGUAGE)

    Debug-Output $(InfName)" TP is "$(TPValue)
    Debug-Output $(InfName)" LED0 is "$(LED0Value)
    Debug-Output $(InfName)" LED1 is "$(LED1Value)
    Debug-Output $(InfName)" LED2 is "$(LED2Value)
    Debug-Output $(InfName)" LED3 is "$(LED3Value)
    Debug-Output $(InfName)" Full Duplex is "$(FullDuplexValue)
    Debug-Output $(InfName)" Bus Timer is "$(BusTimerValue)
    ui start "Inputdlg" $(hLib)
else
	; isa
debug-output "read the isa dialog"
    read-syms FileDependentDlg$(!STF_LANGUAGE)

    Debug-Output $(InfName)" Bus is "$(BusScanValue)
    Debug-Output $(InfName)" TP is "$(TPValue)
    Debug-Output $(InfName)" LED0 is "$(LED0Value)
    Debug-Output $(InfName)" LED1 is "$(LED1Value)
    Debug-Output $(InfName)" LED2 is "$(LED2Value)
    Debug-Output $(InfName)" LED3 is "$(LED3Value)
    Debug-Output $(InfName)" DMA is "$(DMAChannelValue)
    Debug-Output $(InfName)" I/o base is "$(IOBaseAddrValue)
    Debug-Output $(InfName)" Full Duplex is "$(FullDuplexValue)
    Debug-Output $(InfName)" Bus Timer is "$(BusTimerValue)

    ui start "InputDlg"  $(hLib)
endif

    set ExitButton      = $(ButtonPressed)

    Debug-Output " ButtonPressed "$(ButtonPressed)
debug-output $(DLGEVENT)

    FreeLibrary $(hLib)

    ifstr(i) $(DLGEVENT) == "CONTINUE"
ifint $(IsISA) == 1
		set IOBaseAddrValue = $(Combo1Out)
		set IRQValueValue = $(Combo2Out)
		set DMAChannelValue = $(Combo3Out)
		set FullDuplexValue = $(Combo4Out)
		set BusTimerValue = $(Combo5Out)
		set ExitButton = $(ButtonPressed)

		set BusIndex = *($(RadioOut),1)

else
		set FullDuplexValue = $(Combo1Out)
		set BusTimerValue = $(Combo2Out)
		set ExitButton = $(ButtonPressed)

		set BusIndex = *($(RadioOut),1)

endif


		Ifint $(BusIndex) == 1
		    Set BusScanValue = "PNP"
		else-Ifint $(BusIndex) == 2
		    Set BusScanValue = "VESA"
		else-Ifint $(BusIndex) == 3
		    Set BusScanValue = "ISA"
		else-Ifint $(BusIndex) ==  4
		    Set BusScanValue = "ALL"
		Endif

	Set Chk = *($(CheckItemsOut), 1)
	Ifstr(i) $(Chk) == "ON"
	    Set TPValue = 1
	Else
	    Set TPValue = 0
	Endif

		ui pop 1
;               goto nextstep
    else-ifstr(i) $(DLGEVENT) == "EXIT"
		set CommonStatus = STATUS_USERCANCEL
		Debug-Output "Action: exit. Bye."
		ui pop 1
		goto end
    else
		;
		; Unknow command
		;
		ui pop 1


		Debug-Output "Action: unknown. Bye."
		goto end
    endif


    Debug-Output " Combo list out "$(ComboListItemsOut)


;
;   If installing, go create the necessary keys;
;   if configuring, they're already open.
;
skipoptions =+

    ifint $(OldVersionExisted) == $(TRUE)
	ifstr(i) $(!NTN_InstallMode) == configure
    Shell $(UtilityInf), GetBusTypeNum
    set BusTypeNum = $($R1)
    set BusNumberValue = 0
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error."
	goto ShellCodeError
    endif
debug-output "before write registry"
    set DMAChannelValue = *($(DMAChannelValues), ~($(DMAChannelList),$(DMAChannelValue)))

    set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueValue)))

    set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrValue)))

    set LED0Value = *($(LEDValues), ~($(LEDList),$(LED0Value)))
    set LED1Value = *($(LEDValues), ~($(LEDList),$(LED1Value)))
    set LED2Value = *($(LEDValues), ~($(LEDList),$(LED2Value)))
    set LED3Value = *($(LEDValues), ~($(LEDList),$(LED3Value)))
    set FullDuplexValue = *($(FullDuplexValues), ~($(FullDuplexList),$(FullDuplexValue)))
    set BusTimerValue = *($(BusTimerValues), ~($(BusTimerList),$(BusTimerValue)))
  ; Ifint $(TPValue) != 0
    ifint $(IsISA) == 0
	; PCI version
    set NewValueList = {{FDUP,  $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
			{BUSTIMER,  $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+
			{TP,    $(NoTitle),$(!REG_VT_DWORD),$(TPValue)}}

    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    else
	; ISA version
    set NewValueList = {{BUS_TO_SCAN,$(NoTitle),$(!REG_VT_SZ),$(BusScanValue)},+
			{FDUP,  $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
			{BUSTIMER,  $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+
			{TP,    $(NoTitle),$(!REG_VT_DWORD),$(TPValue)},+
			{IOBaseAddress,  $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
			{InterruptNumber,  $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
			{DMAChannel, $(NoTitle),$(!REG_VT_DWORD),$(DMAChannelValue)}}

    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    endif
    CloseRegKey $(KeyParameters)

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error."
	goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	Debug-Output "Registry error: Add value list"
	goto fatalregistry
    endif
    EndWait
    goto successful


	endif
    endif
    StartWait
    ;
    ; Add Software Component
    ;
    ifint $(OldVersionExisted) == $(FALSE)

	ifstr(i) $(!NTN_InstallMode) == "install"
	   Ifstr(i) $(DoCopy) == "YES"

	      Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES

	      Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		  Goto ShellCodeError
	      Else-Ifstr(i) $($R0) == STATUS_FAILED
		  Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
		  ifint $($ShellCode) != $(!SHELL_CODE_OK)
		      goto ShellCodeError
		  endif
		  set Error = $($R0)
		  Goto fatal
	      Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
		  Goto successful
	      Endif

	      Set SrcDir = $($R1)

	   Endif

	   install "Install-Option"

	   ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	      Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
	      ifint $($ShellCode) != $(!SHELL_CODE_OK)
		  goto ShellCodeError
	      endif
	      set Error = $($R0)
	      goto fatal
	   endif
	endif

	Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
	    $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
	    $(NetEventDLL)

	Set OEM_ABANDON_SOFTWARE = TRUE

	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	;
	;   At this point:
	;     $R1 contains the product version key handle;
	;     $R2 contains the NetRules subkey handle;
	;     $R3 contains the new Services key handle; and
	;     $R4 contains the Parameters key
	;     $R5 contains the Linkage Key
	;
	set RegistryErrorIndex = $($R0)
	set KeyProduct      = $($R1)
	Set SoftNetRulesKey = $($R2)
	CloseRegKey $($R3)
	CloseRegKey $($R4)
	CloseRegKey $($R5)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "Registry error: add software components"
	    CloseRegKey $(KeyProduct)
	    CloseRegKey $(SoftNetRulesKey)
	    goto fatalregistry
	endif
  
	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
			   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
			   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
			   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
			   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
			   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
			   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

	Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error."
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "Registry error: add value list."
	    CloseRegKey $(KeyProduct)
	    CloseRegKey $(SoftNetRulesKey)
	    goto fatalregistry
	endif

	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
			    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

	Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error."
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "Resgitry error: add value list."
	    goto fatalregistry
	endif
    endif
    debug-output $(AdapterList)
    ForListDo $(AdapterList)
	    set BusNumber = *($($),1)
	    set DeviceNum = *($($),2)
	    set FunctionNum = *($($),3)
    ;
    ;   Create the HARDWARE\Netcard region and its corresponding service
    ;
        Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)

        ifint $($R4) != -1
	        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
        endif

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
	        Debug-Output "Cannot add hardware component"
	        goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	        EndWait
	        Debug-Output "Registry error: add hardware component"
	        CloseRegKey $($R1)
	        CloseRegKey $($R2)
	        CloseRegKey $($R3)
	        goto fatalregistry
        endif

    ;
    ;   At this point:
    ;     $R1  Registry key variable for HARDWARE\Netcard\(n)
    ;     $R2  Registry key variable for HARDWARE\Netcard\(n)\\NetRules
    ;     $R3  Registry key handle for <service>\Parameters key
    ;     $R4  Adapter number assigned to adapter
    ;     $R5  Service name generated by combining svc name with adapter number
    ;
        set KeyParameters = $($R3)
        set KeyAdapterRules = $($R2)
        set AdapterNumber = $($R4)

        ifint $(IsISA) == 1
            set HardwareDescription = $(GenericAdapterName)
            set HardwareTitle = $(GenericAdapterName)
        else
            set HardwareDescription = $(GenericPCIAdapterName)
            set HardwareTitle = $(GenericPCIAdapterName)
        endif

        set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
		           {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(HardwareTitle)},+
		           {Description,$(NoTitle),$(!REG_VT_SZ),$(HardwareDescription)},+
		           {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
		           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                   {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)},+
		           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

        Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
	        Debug-Output "ShellCode error"
	        goto ShellCodeError
        endif

        CloseRegKey $($R1)

        set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
        set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
			    {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
			    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
			    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

        Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
	        Debug-Output "ShellCode error."
	        goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	        EndWait
	        Debug-Output "Resgitry error: add value list."
	        CloseRegKey $(KeyParameters)
	        CloseRegKey $(KeyAdapterRules)
	        goto fatalregistry
        endif

        CloseRegKey $(KeyAdapterRules)

        goto writeparameters
    ;
    ;   REQUIRED:   $(KeyParameters) contains service Parameters key handle
    ;
writeparameters = +
        Shell $(UtilityInf), GetBusTypeNum
        set BusTypeNum = $($R1)
        set BusNumberValue = 0
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
	        Debug-Output "ShellCode error."
	        goto ShellCodeError
        endif
        debug-output "before write registry"
        set DMAChannelValue = *($(DMAChannelValues), ~($(DMAChannelList),$(DMAChannelValue)))

        set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueValue)))

        set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrValue)))

        set LED0Value = *($(LEDValues), ~($(LEDList),$(LED0Value)))
        set LED1Value = *($(LEDValues), ~($(LEDList),$(LED1Value)))
        set LED2Value = *($(LEDValues), ~($(LEDList),$(LED2Value)))
        set LED3Value = *($(LEDValues), ~($(LEDList),$(LED3Value)))
        set FullDuplexValue = *($(FullDuplexValues), ~($(FullDuplexList),$(FullDuplexValue)))
        set BusTimerValue = *($(BusTimerValues), ~($(BusTimerList),$(BusTimerValue)))
      ; Ifint $(TPValue) != 0
        ifint $(IsISA) == 0
	        ; PCI version
            set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),5},+
			    {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
			    {LED0,  $(NoTitle),$(!REG_VT_DWORD),$(LED0Value)},+
			    {LED1,  $(NoTitle),$(!REG_VT_DWORD),$(LED1Value)},+
			    {LED2,  $(NoTitle),$(!REG_VT_DWORD),$(LED2Value)},+
			    {LED3,  $(NoTitle),$(!REG_VT_DWORD),$(LED3Value)},+
			    {FDUP,  $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
			    {BUSTIMER,  $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+
			    {TP,    $(NoTitle),$(!REG_VT_DWORD),$(TPValue)},+
                            {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),536875042},+
			    {SlotNumber, $(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
			    {BusNumber,  $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)}}

            Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
        else
	        ; ISA version
            set NewValueList = {{BUS_TO_SCAN,$(NoTitle),$(!REG_VT_SZ),$(BusScanValue)},+
			    {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
			    {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
			    {LED0,  $(NoTitle),$(!REG_VT_DWORD),$(LED0Value)},+
			    {LED1,  $(NoTitle),$(!REG_VT_DWORD),$(LED1Value)},+
			    {LED2,  $(NoTitle),$(!REG_VT_DWORD),$(LED2Value)},+
			    {LED3,  $(NoTitle),$(!REG_VT_DWORD),$(LED3Value)},+
			    {FDUP,  $(NoTitle),$(!REG_VT_DWORD),$(FullDuplexValue)},+
			    {BUSTIMER,  $(NoTitle),$(!REG_VT_DWORD),$(BusTimerValue)},+
			    {TP,    $(NoTitle),$(!REG_VT_DWORD),$(TPValue)},+
			    {IOBaseAddress,  $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
			    {InterruptNumber,  $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
			    {DMAChannel, $(NoTitle),$(!REG_VT_DWORD),$(DMAChannelValue)},+
			    {BusNumber,  $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)}}

            Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
        endif
        CloseRegKey $(KeyParameters)

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
	        Debug-Output "ShellCode error."
	        goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	        Debug-Output "Registry error: Add value list"
	        goto fatalregistry
    endif
    EndForListDo
    EndWait
    goto successful

;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------

removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	; Remove Software Component
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    else
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $(!NTN_RegBase)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif

    goto end

;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------

UpgradeSoftware = +
    LoadLibrary "x" $(!STF_CWDDIR)\ncpa.cpl NCPA_HANDLE
    ;set !NTN_ScUseRegistry = "YES"
    OpenRegKey $(!REG_H_LOCAL) "" "Software\Microsoft\PCNTN3" $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        ;
        ; remove the old one
        ;
        ; First remove software
        DeleteRegTree $(KeyProduct) ""
    
        ;
        ; remove the driver
        ;
        LibraryProcedure NCPA_RESULT $(NCPA_HANDLE), CPlSetup $(!STF_HWND), DELETESVC, "PCNTN3"
    
        ;
        ; Remove network card
        ;
        set NetworkCardKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards"
            OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardKeyName) $(MAXIMUM_ALLOWED) IE_KeyNetcards
        ifstr(i) $(IE_KeyNetcards) != ""    
            EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
            ForListDo $(IE_KeyNameList)
                OpenRegKey $(IE_KeyNetcards) "" *($($),1) +
                    $(MAXIMUM_ALLOWED) NetworkCardKey
                Ifstr(i) $(NetworkCardKey) != $(KeyNull)
                    GetRegValue $(NetworkCardKey),"ProductName", ProductNameInfo
                    set ProductName = *($(ProductNameInfo), 4)
                    Debug-Output "   ProductName = "$(ProductName)
                    ifstr(i) $(ProductName) != "PCNTN3"
                        goto nextnetcard
                    endif
                    GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
                    set ServiceName = *($(ServiceNameInfo), 4)
                    Debug-Output "   ServiceName = "$(ServiceName)
                    OpenRegKey $(!REG_H_LOCAL) "" "System\CurrentControlSet\Services\"$(ServiceName) +
                          $(MAXIMUM_ALLOWED) ServiceKey
                DeleteRegTree $(ServiceKey) ""
                DeleteRegTree $(NetworkCardKey) ""
                endif
    nextnetcard = +
            EndForListDo
        endif	
    
        ;
        ; make sure amdpci does not exit
        ;
        OpenRegKey $(!REG_H_LOCAL) "" "Software\Microsoft\AMDPCI" $(MAXIMUM_ALLOWED) KeyProduct2
        ifstr $(KeyProduct2) == $(KeyNull)
    
            LibraryProcedure NCPA_RESULT $(NCPA_HANDLE), CPlSetup $(!STF_HWND), STARTSVC, NetDetect
            set !NTN_InstallMode = Install
            Shell "" InstallOption $(!STF_LANGUAGE) "AMDPCI" $(SrcDir) "YES" "YES" "NO"
            set !NTN_InstallMode = Update
        else
            ;
            ; something wrong
            ;
        endif
    else
    endif
    FreeLibrary $(NCPA_HANDLE)
    goto end
    ;
    ; End of Upgrade Software
    ;

;
;  Escape hatches
;
successful = +
    goto end

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo

    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	; Remove Software Component
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif

    goto end

;
; warning display
;
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
;
; non fatal error display
;
nonfatalinfo = +
    Set Severity = STATUS
    Set CommonStatus = STATUS_USERCANCEL
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif

;
;  Registry is broken
;
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
;
;  Netcard detection failure
;
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error: cannot get an error string."
	goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
;
; fatal error display
;
fatal = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif

    goto setfailed

;
;  Shelling error
;
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    ;
    ; if OEM_ABANDON_ON == TRUE, then remove the registry entries
    ;
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end

end = +
    goto term

term = +

    Return $(CommonStatus)

[DebugConfiguration]

    Set InfName = "OEMNADAM.INF"
    Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
    Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQ_Level)
    Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)

    return


;***************************************************************
;  INSTALL SECTIONS
;***************************************************************
[Install-Option]
    set STF_VITAL = ""

    ifstr(i) $(AddCopy) == "YES"

	;
	; Add the files to the copy list
	;
	;  BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
	;      the other INF files
	;
	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers

    endif

    ifstr(i) $(DoCopy) == "YES"

       ;
       ; Copy files in the copy list
       ;
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList

    endif

    Exit

[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   ;set STF_VERSION     = "YES"

   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)

   exit

[Install-Helpfile]
   Debug-Output "At Install-Helpfile"
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   ;set STF_VERSION     = "YES"

   ifstr(i) $(AddCopy) == "YES"
       AddSectionFilesToCopyList Files-hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   endif

   ifstr(i) $(DoCopy) == "YES"
      set !STF_NCPA_FLUSH_COPYLIST = TRUE
      CopyFilesInCopyList
   endif
   exit

[Install-Dll]
   set STF_VITAL        = ""
   ifstr(i) $(AddCopy) == "YES"
       AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
   endif

   ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
   endif
   exit