;===================================================================
;
;   Installation file for MCS XNS Stack
;
;===================================================================
[Identification]
    OptionType = NetTransport

;-------------------------------------------------------------------
; OPTION LIST
; -----------
;
;       This is an internal name for the options we can install.
;-------------------------------------------------------------------
[Options]
    MCSXNS

;********************************************************************
;       CONSTANTS FOR USING DIALOGS
;********************************************************************
[FileConstants]
;
;-----  Product Info
;
Manufacturer    = "Microsoft"
ProductMajorVersion     = "4"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
McsXnsEventDLL  = "%SystemRoot%\System32\xnsmsg.dll"
UbnbEventDLL    = "%SystemRoot%\System32\ubnbmsg.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"

ProductMCSXNSWshDllPath = "%SystemRoot%\System32\wshxns.dll"
;
;-----  This is the entry for the service controller daemon
;
ProductMCSXNSName       = "McsXns"
ProductMCSXNSImagePath  = "%SystemRoot%\System32\mcsxnsvc.exe"
ProductMCSXNSSvcType    = "serviceshare"

NetRuleMCSXNSType       = "mcsxns mcsxnsTransport streamsStack"
NetRuleMCSXNSUse        = $(SoftwareType)" yes yes"
NetRuleMCSXNSBindForm   = """McsXns"" yes yes container"
NetRuleMCSXNSClass      = "mcsxnsTransport basic yes"
;
;-----  This is the entry for the ipx/spx kernel driver
;
ProductMCSXNSSYSName    = "McsXnssys"
ProductMCSXNSSYSImagePath= "\SystemRoot\System32\drivers\mcsxns.sys"
ProductMCSXNSSYSSvcType = "kernel"
;
;-----  This is the entry for the NetBIOS daemon
;
ProductUBNBName = "Ubnb"
ProductUBNBImagePath = "%SystemRoot%\System32\ubnbsvc.exe"
ProductUBNBSvcType      = "serviceshare"

NetRuleUBNBType = "ubnb ubnbNbTransport streamsStack"
NetRuleUBNBUse  = $(SoftwareType)
NetRuleUBNBBindForm     = """Ubnb"" yes yes container"
NetRuleUBNBClassList = {"ubnbNbTransport netBiosTransport yes"}
;
;-----  This is the entry for the Nvl NetBIOS kernel driver
;
ProductUBNBSYSName       = "Ubnbsys"
ProductUBNBSYSImagePath  = "\SystemRoot\System32\drivers\ubnb.sys"
ProductUBNBSYSSvcType    = "kernel"

;--------------------------------------------------------------------
;       Entries for the registry
;--------------------------------------------------------------------
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(Product$(Option)Name)"\CurrentVersion"
LinkageKeyName  = $(!NTN_ServiceBase)"\McsXns\Linkage"
ServiceMCSXNSKeyName = $(!NTN_ServiceBase)"\McsXns"
ServiceKeyName  = $(!NTN_ServiceBase)
DosDevices      = "SYSTEM\CurrentControlSet\Control\Session Manager\DOS Devices"

;--------------------------------------------------------------------
;       Some nice general constants to have around
;--------------------------------------------------------------------
[GeneralConstants]
UtilityInf       = "UTILITY.INF"
subroutineinf    = "SUBROUTN.INF"
SoftwareType     = "transport"
Exit_Code        = 0
BillboardVisible = 0
Sockminlength    = 14
Sockmaxlength    = 16
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull        = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct    = ""
KeyParameters = ""
TRUE          = 1
FALSE         = 0
NoTitle       = 0
ExitState     = "Active"
OldVersionExisted = $(FALSE)
DriverPath   = $(!STF_NTPATH)\drivers

;--------------------------------------------------------------------
; 1. date
;
;       This routine sets the variable "Now" to be:
;
;       1. Sec from 1-1-1970
;       2. Year
;       3. Month
;       4. Day
;       5. Hour
;       6. Minute
;       7. Second
;--------------------------------------------------------------------
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

;--------------------------------------------------------------------
;   Identify
;   --------
;
;       This is called to verify that this INF is used to install
;       the kind of program that the setup program wants.
;       (net transport, driver, ....).
;
;       INPUT:  None
;
;       OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
;               $($R1): Option Type
;               $($R2): Diskette Descriptor
;--------------------------------------------------------------------
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

;--------------------------------------------------------------------
;   ReturnOptions
;   -------------
;
;       This is called to return the option list supported by this
;       INF and the localized text list representing the options.
;       This is called from the setup program.
;
;       INPUT:  $($0):  Language used (ENG, FRN, ...)
;
;       OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
;                               STATUS_NOLANGUAGE
;                               STATUS_FAILED
;               $($R1): Option List
;               $($R2): Option Text List
;--------------------------------------------------------------------
[ReturnOptions]
    set Status         = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
;
;-----  Make sure the language passed is in our list
;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        goto returnoptions
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
;
;-----  Build the list of options and the text for the options
;
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
;
;-----  Return the status
;
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

;----------InstallOption-------------------------------------------------
;
; InstallOption:
;
;      This section is shelled to by main installation processing
;      or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION:  To copy files representing Options
;            To configure the installed option
;            To update the registry for the installed option
;
; INPUT:     $($0):  Language to use
;            $($1):  OptionID to install
;            $($2):  SourceDirectory
;            $($3):  AddCopy  (YES | NO)
;            $($4):  DoCopy   (YES | NO)
;            $($5):  DoConfig (YES | NO)
;
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;                            STATUS_NOLANGUAGE |
;                            STATUS_USERCANCEL |
;                            STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
    ;
    ; extract parameters
    ;
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif


    Debug-Output "OEMNXPXN.INF: STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output "OEMNXPXN.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
;
;-----  Define all constants we need
;
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
;
;-----  Take down the hourglass
;
    EndWait
;
;----- Set the label to jump to according to what the user
;      wants done.
;
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
        set OEM_ABANDON_OPTIONS = {+
            $(ProductMCSXNSSYSName),+
            $(ProductUBNBSYSName)}
        set OEM_ABANDON_SOFTWARE = {+
            $(ProductMCSXNSName),+
            $(ProductUBNBName), "Streams"}
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set StartLabel = configureadapter
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else
        set StartLabel = installadapter
        set OEM_ABANDON_SOFTWARE = {}
        set OEM_ABANDON_OPTIONS = {}
    endif
;
;-----  Jump to the label to execute the function needed
;
    set from = $(fatal)
    set to   = $(fatal)
    goto $(StartLabel)

;---------------------------------------------------------------------
;       This section handles the installation and setup of the driver
;---------------------------------------------------------------------
installadapter = +
    Debug-Output "OEMNXPXN.INF: At installadapter"
;
;-----  Open the key for the product
;
    Debug-Output "OEMNXPXN.INF: Opening key for the product"

    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Debug-Output "OEMNXPXN.INF: Back from opening key for the product"
;
;-----  If the key is already there, then tell the user that the
;       product is already installed.
;
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        Shell $(UtilityInf), VerExistedDlg, $(Product$(Option)Title),+
            $(ProductVersion)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXPXN.INF: ShellCode error: cannot get an error string."
            goto ShellCodeError
        endif
        goto end
    endif
;
;-----  If we are to copy - then set it here
;
    Ifstr(i) $(!NTN_InstallMode) == "install"
        Ifstr(i) $(DoCopy) == "YES"

            Debug-Output "OEMNXPXN.INF: Calling DoAskSource 1"

            Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir)
            Ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Goto ShellCodeError
            Else-Ifstr(i) $($R0) == STATUS_FAILED
               Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
               endif
               set Error = $($R0)
               Goto fatal
            Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
            Endif
            Set SrcDir = $($R1)
        Endif
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set Error = $($R0)
            goto fatal
        endif
    endif
;
;----- Get the string to use and put up a box that we are installing
;
    Debug-Output "OEMNXPXN.INF: Put up box that we are installing"
    set OEM_ABANDON_ON  = TRUE
    read-syms Billboard1$(!STF_LANGUAGE)
    Shell "subroutn.inf" PushBillboard NETSTATUSDLG $(Status)
    Set BillboardVisible = 1
;
;-----  Set the options that we are going to install
;
    Set DoMcsXns     = FALSE
    Set DoMcsXnsSys  = FALSE
    Set DoUbnb       = FALSE
    Set DoUbnbSys    = FALSE
    Set DoStreams    = FALSE
    Ifstr(i) $(Option) == MCSXNS
        Set DoMcsXns     = TRUE
        Set DoMcsXnsSys  = TRUE
        Set DoUbnb       = TRUE
        Set DoUbnbSys    = TRUE
        Set DoStreams    = TRUE
    Else-ifstr(i) $(Option) == UBNB
        Set DoUbnb       = TRUE
        Set DoUbnbSys    = TRUE
    Else
        Debug-Output "OEMNXPXN.INF: Unrecognized option"
    Endif
;
;-----  Put up the hourglass
;
    Debug-Output "OEMNXPXN.INF: Start the install"
    StartWait
;
;-----  Option to install McsXns Service Controller Daemon
;
    ifstr(i) $(DoMcsXns) == TRUE
        Set ThisOption = MCSXNS
        Set OEM_ABANDON_SOFTWARE = >($(OEM_ABANDON_SOFTWARE), $(Product$(ThisOption)Name))
        Debug-Output "OEMNXPXN.INF: installing McsXns."

        Shell $(UtilityInf), AddSoftwareComponent,+
            $(Manufacturer),+
            $(Product$(ThisOption)Name),+
            $(Product$(ThisOption)Name),+
            $(Product$(ThisOption)DisplayName),+
            $(STF_CONTEXTINFNAME),+
            $(Product$(ThisOption)ImagePath),+
            $(Product$(ThisOption)SvcType),+
            "",+
            {"McsXnssys"},+
            ""

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXPXN.INF: ShellCode error, add software component"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "OEMNXPXN.INF: Registry error: add software components"
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        ;
        ;-----  Set the return values to local vars
        ;
        Set McsXnsVersKeyHandle = $($R1)
        Set McsXnsRulesKeyHandle = $($R2)
        Set McsXnsSvcKeyHandle  = $($R3)
        Set McsXnsParmKeyHandle = $($R4)
        Set McsXnsLinkageHandle = $($R5)
        ;
        ;----- Set the Version entry
        ;
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(Product$(ThisOption)Title)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(Product$(ThisOption)Description)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(Product$(ThisOption)Name)},+
                           {Review,$(NoTitle),$(!REG_VT_DWORD),1},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(McsXnsVersKeyHandle), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXPXN.INF: ShellCode error, add value list"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "OEMNXPXN.INF: Registry error: add value list."
            CloseRegKey $(McsXnsVersKeyHandle)
            CloseRegKey $(McsXnsRulesKeyHandle)
            CloseRegKey $(McsXnsSvcKeyHandle)
            CloseRegKey $(McsXnsParmKeyHandle)
            CloseRegkey $(McsXnsLinkageHandle)
            goto fatalregistry
        Endif
        ;
        ;----- Set the NetRules entry
        ;
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRule$(ThisOption)Type)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRule$(ThisOption)Use)},+
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRule$(ThisOption)BindForm)},+
                            {class,$(NoTitle),$(!REG_VT_SZ),$(NetRule$(ThisOption)Class)},+
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(ThisOption)} }
        Shell  $(UtilityInf), AddValueList, $(McsXnsRulesKeyHandle), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXPXN.INF: ShellCode error."
            goto ShellCodeError
        endif
        ;
        ;-----  Close up some of the handles
        ;
        set RegistryErrorIndex = $($R0)
        CloseRegKey $(McsXnsVersKeyHandle)
        CloseRegKey $(McsXnsRulesKeyHandle)
        CloseRegKey $(McsXnsParmKeyHandle)
        ;
        ;-----  If we got an error - get out
        ;
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            CloseRegKey $(McsXnsLinkageHandle)
            CloseRegKey $(McsXnsSvcKeyHandle)
            EndWait
            Debug-Output "OEMNXPXN.INF: Registry error: add value list."
            goto fatalregistry
        endif
        ;
        ;-----  Set the OtherDependencies List
        ;
        Set NewValueList = {{OtherDependencies,$(NoTitle),$(!REG_VT_MULTI_SZ),{"McsXnssys"}}}
        Shell  $(UtilityInf), AddValueList, $(McsXnsLinkageHandle), $(NewValueList)
        CloseRegKey $(McsXnsLinkageHandle)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            CloseRegKey $(McsXnsSvcKeyHandle)
            Debug-Output "OEMNXPXN.INF: ShellCode error."
            goto ShellCodeError
        endif
        ;
        ;-----  Go create all the subkey stuff
        ;
        Shell "" CreateMcsXnsConfiguration $(McsXnsSvcKeyHandle)
        ;
        ;-----  Close up and check for error
        ;
        CloseRegKey $(McsXnsSvcKeyHandle)
        Set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "OEMNXPXN.INF: Registry error: Create MCSXNS configuration."
            goto fatalregistry
        endif
        ;
        ;-----  Add info to the Winsock entry
        ;       This is now done in the service controller daemon

        Debug-Output "OEMNXPXN.INF: Adding winsock data"

        Shell $(UtilityInf), AddWinsockInfo, +
              $(Product$(ThisOption)Name), +
              $(Product$(ThisOption)WshDllPath), +
              $(Sockmaxlength),$(Sockminlength)

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            Debug-Output "OEMNXPXN.INF: Registry error: Add Winsock Info."
        Endif
    Endif
;
;-----  Option to install McsXns Kernel Driver
;
    Ifstr(i) $(DoMcsXnsSys) == TRUE
        Set ThisOption = MCSXNSSYS
        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(Product$(ThisOption)Name))
        Debug-Output "OEMNXPXN.INF: installing MCSXNSSYS..."
        ;
        ;----- Create the service
        ;
        Shell $(UtilityInf), CreateService,+
            $(Product$(ThisOption)Name),+
            $(Product$(ThisOption)DisplayName),+
            $(Product$(ThisOption)ImagePath),+
            $(Product$(ThisOption)SvcType) "",+
            {"Streams"}, "", $(McsXnsEventDLL)

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXPXN.INF: ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        Set McsXnsSysSvcKeyHandle = $($R1)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            CloseRegKey $(McsXnsSysSvcKeyHandle)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            Debug-Output "OEMNXPXN.INF: Registry error: add software components"
            goto fatalregistry
        endif
;;      CreateRegKey $(McsXnsSysSvcKeyHandle) {"Performance",$(NoTitle),GenericClass} "" +
;;              $(MAXIMUM_ALLOWED) "" KeyPerformance
;;      set NewValueList = {{Library,$(NoTitle),$(!REG_VT_SZ),"Perfctrs.dll"},+
;;                         {Open,$(NoTitle),$(!REG_VT_SZ),"OpenTcpIpPerformanceData"},+
;;                         {Collect,$(NoTitle),$(!REG_VT_SZ),"CollectTcpIpPerformanceData"},+
;;                         {Close,$(NoTitle),$(!REG_VT_SZ),"CloseTcpIpPerformanceData"}}
;;      Shell  $(UtilityInf), AddValueList, $(KeyPerformance), $(NewValueList)
;;      set RegistryErrorIndex = $($R0)
;;      CloseRegKey $(KeyPerformance)
        CloseRegKey $(McsXnsSysSvcKeyHandle)
        Ifstr $(RegistryErrorIndex) != NO_ERROR
            goto fatalRegistry
        Endif
    Endif
;
;-----  Option to install Ungermann-Bass NetBIOS
;
    Ifstr(i) $(DoUbnb) == TRUE
        Set ThisOption = UBNB
        Set OEM_ABANDON_SOFTWARE = >($(OEM_ABANDON_SOFTWARE), $(Product$(ThisOption)Name))
        Debug-Output "OEMNXPXN.INF: installing UBNB..."
        Shell $(UtilityInf), AddSoftwareComponent,+
            $(Manufacturer),+
            $(Product$(ThisOption)Name),+
            $(Product$(ThisOption)Name),+
            $(Product$(ThisOption)DisplayName),+
            $(STF_CONTEXTINFNAME),+
            $(Product$(ThisOption)ImagePath),+
            $(Product$(ThisOption)SvcType),+
            "TDI",+
            {},+
            ""
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXPXN.INF: ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "OEMNXPXN.INF: Registry error: add software components"
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        Set UBNBProductKey      = $($R1)
        Set UBNBNetRuleKey      = $($R2)
        Set UBNBServiceKey      = $($R3)
        Set UBNBParameterKey = $($R4)
        Set UBNBLinkageKey      = $($R5)
        ;
        ;-----  Set the version info
        ;
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(Product$(ThisOption)Title)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(Product$(ThisOption)Description)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(Product$(ThisOption)Name)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(UBNBProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXPXN.INF: ShellCode error."
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "OEMNXPXN.INF: Registry error: add value list."
            CloseRegKey $(UBNBProductKey)
            CloseRegKey $(UBNBNetRuleKey)
            CloseRegKey $(UBNBServiceKey)
            CloseRegKey $(UBNBParameterKey)
            CloseRegKey $(UBNBLinkageKey)
            goto fatalregistry
        endif
        ;
        ;-----  Set the other dependencies
        ;
        set NewValueList = {{OtherDependencies,$(NoTitle),$(!REG_VT_MULTI_SZ),{"McsXns","Ubnbsys"}}}
        Shell  $(UtilityInf), AddValueList, $(UBNBLinkageKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXPXN.INF: ShellCode error."
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "OEMNXPXN.INF: Registry error: add value list."
            CloseRegKey $(UBNBProductKey)
            CloseRegKey $(UBNBNetRuleKey)
            CloseRegKey $(UBNBServiceKey)
            CloseRegKey $(UBNBParameterKey)
            CloseRegKey $(UBNBLinkageKey)
            goto fatalregistry
        endif
        ;
        ;-----  Set the NetRules entry
        ;
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRule$(ThisOption)Type)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRule$(ThisOption)Use)},+
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRule$(ThisOption)BindForm)},+
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRule$(ThisOption)ClassList)},+
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(ThisOption)}}
        Shell  $(UtilityInf), AddValueList, $(UBNBNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXPXN.INF: ShellCode error."
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "OEMNXPXN.INF: Registry error: add value list."
            CloseRegKey $(UBNBProductKey)
            CloseRegKey $(UBNBNetRuleKey)
            CloseRegKey $(UBNBServiceKey)
            CloseRegKey $(UBNBParameterKey)
            CloseRegKey $(UBNBLinkageKey)
            goto fatalregistry
        endif

        Set NewValueList = {{NbProvider,$(NoTitle),$(!REG_VT_SZ),"_xns"},+
                {EndPoint,$(NoTitle),$(!REG_VT_DWORD),1}}

        Shell  $(UtilityInf), AddValueList, $(UBNBParameterKey), $(NewValueList)
        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXPXN.INF: ShellCode error."
            goto ShellCodeError
        Endif

        set RegistryErrorIndex = $($R0)
        CloseRegKey $(UBNBProductKey)
        CloseRegKey $(UBNBNetRuleKey)
        CloseRegKey $(UBNBServiceKey)
        CloseRegKey $(UBNBParameterKey)
        CloseRegKey $(UBNBLinkageKey)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "OEMNXPXN.INF: Registry error: add value list."
            goto fatalregistry
        endif

        ;Shell $(UtilityInf) AddMixRpcProtocol "Netbios" "mcsxns" "ncacn_nb_xns" "rpclt1.dll" "rpclt1.dll"
        ;Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        ;    Debug-Output "OEMNXPXN.INF: ShellCode error adding RPC procotol"
        ;    goto ShellCodeError
        ;endif
        ;Set RegistryErrorIndex = $($R0)
        ;Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
        ;    Debug-Output "OEMNXPXN.INF: ERROR adding RPC protocol data"
        ;    EndWait
        ;    goto fatalregistry
        ;Endif

    Endif
;
;-----  Option to install Ungermann-Bass NetBIOS kernel driver
;
    Ifstr(i) $(DoUbnbSys) == TRUE
        Set ThisOption = UBNBSYS
        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(Product$(ThisOption)Name))
        Debug-Output "OEMNXPXN.INF: installing UBNBSYS..."
        Shell $(UtilityInf), CreateService,+
            $(Product$(ThisOption)Name),+
            $(Product$(ThisOption)DisplayName),+
            $(Product$(ThisOption)ImagePath),+
            $(Product$(ThisOption)SvcType), "", {"Streams"}, "",+
            $(UbnbEventDLL)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXPXN.INF: ShellCode error"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $($R1)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "OEMNXPXN.INF: Registry error: add software components"
            goto fatalregistry
        endif
    Endif
;
;-----  Take down the hourglass
;
    EndWait
;
;-----  If the billboard is up - take it down
;
    Ifint $(BillboardVisible) != 0
        Shell "subroutn.inf" PopBillboard
        Set BillboardVisible = 0
    Endif


;
; Install Streams
;
    Ifstr(i) $(DoStreams) == TRUE

        Set ThisOption = STREAMS

        Set OEM_ABANDON_SOFTWARE = >($(OEM_ABANDON_SOFTWARE), "Streams")

        Debug-Output "OEMNXPXN.INF: installing STREAMS..."

        Set !STF_SRCDIR_OVERRIDE = $(SrcDir)

        Shell $(UtilityInf) AddStreams

        Set !STF_SRCDIR_OVERRIDE = ""

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            goto fatalregistry
        endif

    Endif

;
;-----  Exit OK
;
    goto successful

;---------------------------------------------------------------------
;       This section handles the configuration of the driver
;---------------------------------------------------------------------
configureadapter = +
    Debug-Output "OEMNXPXN.INF: At ConfigureAdapter"

    ifstr(i) $(Option) == "MCSXNS"
        ;
        ;  Read the active and disabled bindings into a single list
        ;
        Set BindList = {}
        Set DisabledList = {}

        OpenRegKey $(!REG_H_LOCAL) "" $(LinkageKeyName) $(MAXIMUM_ALLOWED) LinkageKey

        ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
            GetRegValue $(LinkageKey) "Bind" BindList
            ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
               set BindList = *($(BindList),4)
            else
               Set BindList = {}
            endif
            OpenRegKey $(LinkageKey) "" Disabled $(MAXIMUM_ALLOWED) DisabledKey
            ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
                GetRegValue $(DisabledKey) "Bind" DisabledList
                ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
                   Set DisabledList = *($(DisabledList),4)
                else
                   Set DisabledList = {}
                endif
                CloseRegKey $(DisabledKey)
            endif
            CloseRegKey $(LinkageKey)
        endif

        ;  Merge the two lists

        ForListDo $(DisabledList)
            Set BindList = >($(BindList),$($))
        EndForListDo

        ;  Check that we're bound to something

        ifstr(i) $(BindList) == {}
            debug-output "OEMNXPXN.INF: no binding info; warning user"
            read-syms InfoDlgCantConfigure
            goto infomsg
        endif

        ;  Extract and validate the card names from the binding strings.

        Debug-Output "OEMNXPXN.INF: configureadapter, BindList = "$(BindList)

        set OldVersionExisted = $(TRUE)
        set CardList = ""

        ForListDo $(BindList)

            ;  Adapter name is the last element in binding string;
            ;    extract it.

            Split-String $($), "\", BindInfo
            QueryListSize BindElem $(BindInfo)
            Set BindName = *($(BindInfo),$(BindElem))

            ;  Validate it; append to string if OK

            OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(BindName) $(MAXIMUM_ALLOWED) CardServiceKey
            ifstr(i) $(CardServiceKey) != ""
                CloseRegKey $(CardServiceKey)
                Set CardList = $(CardList)"@"$(BindName)
            endif
        EndForListDo

        ifstr(i) $(CardList) != ""

            Debug-Output "OEMNXPXN.INF: configureadapter, CardList = "$(CardList)

            set FLibraryErrCtl = 1
            LoadLibrary "x", $(!STF_WINDOWSSYSPATH)\xnscfg.dll MCSXNSLIB_HANDLE

            LibraryProcedure ResultList, $(MCSXNSLIB_HANDLE), nlink_setup_dialog, $(!STF_HWND), +
                            $(CardList), $(!STF_COMPUTERNAME), $(!STF_WINDOWSSYSPATH)\xnscfg.dll

            FreeLibrary $(MCSXNSLIB_HANDLE)
            set FLibraryErrCtl = 0

            ;  Result list is of the form  {<0|1>,"name of active adapter"}

            Debug-Output "OEMNXPXN.INF: configureadapter, ResultList = "$(ResultList)
            Set Result = *($(ResultList),1)
            Set AdapterChosen = *($(ResultList),2)

            Ifint $(Result) == 0
                set CommonStatus = STATUS_NO_EFFECT
            Else
                set CommonStatus = STATUS_REBOOT

                Ifstr(i) $(AdapterChosen) != ""

                     Set BindingChosen = ""
                     ForListDo $(BindList)
                         Split-String $($), "\", BindInfo
                         QueryListSize BindElem $(BindInfo)
                         Set AdapterName = *($(BindInfo),$(BindElem))
                         Ifstr(i) $(AdapterName) == $(AdapterChosen)
                             Set BindingChosen = $($)
                         Endif
                     EndForListDo

                     ;  Change the bindings on both the primary transport
                     ;  and the NetBIOS daemon.

                     Ifstr(i) $(BindingChosen) != ""
                         Debug-Output "OEMNXPXN.INF: configureadapter, BindingChosen = "$(BindingChosen)
                         set FLibraryErrCtl = 1
                         LibraryProcedure ResultList $(!NCPA_HANDLE), CPlSetup $(!STF_HWND), +
                               ACTIVBIND, $(ProductMCSXNSName) {$(BindingChosen)}
                         set FLibraryErrCtl = 0
                         Set Result = *($(ResultList),1)
                         Debug-Output "OEMNXPXN.INF: configureadapter, ACTIVBIND returned error: "$(Result)
                     Else
                         Debug-Output "OEMNXPXN.INF: configureadapter, ERROR: AdapterChosen not found in bindings list!"
                     Endif
                Endif
            Endif
        else
            set CommonStatus = STATUS_USERCANCEL
        endif
    else
        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMNXPIP.INF: ShellCode error: cannot get an error string."
            goto ShellCodeError
        endif
        set Error = $($R0)
        set from = end
        set to = end
        set CommonStatus = STATUS_NO_EFFECT
        goto nonfatalinfo
    endif
    goto end


;---------------------------------------------------------------------
;       This section handles the configuration of the driver
;---------------------------------------------------------------------
bindingadapter =+
    set FLibraryErrCtl = 1
    LibraryProcedure ResultList, $(!NCPA_HANDLE), CPlSetup, $(!STF_HWND), MCSCFGCHK "MCSXNS"
    set FLibraryErrCtl = 0
    Set Result = *($(ResultList),1)
    ifint $(Result) == 0
        Debug-Output "OEMNXPXN.INF:  reconfiguration not required"
        set CommonStatus = STATUS_USERCANCEL
        goto successful
    else
        Debug-Output "OEMNXPXN.INF:  reconfiguration required"
    endif

    goto configureadapter

;---------------------------------------------------------------------
;       This section handles the removal of the driver
;---------------------------------------------------------------------
removeadapter = +
    Debug-Output "OEMNXPXN.INF: At removeadapter"
    ;
    ;  Remove XNS RPC info
    ;
    Shell $(UtilityInf) RemoveRpcProtocol "ncacn_nb_xns"
    ;Ifstr(i) $($0) != NO_ERROR
    ;    Debug-Output "OEMNXPXN.INF: ERROR deleting RPC protocol data"
    ;Endif

    ForListDo $(OEM_ABANDON_SOFTWARE)
        debug-output "Remove component: "$($)
        ifstr(i) $($) == "Streams"
            Shell $(UtilityInf), RemoveStreams
        else
            Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $($)
        endif
    EndForListDo
    ForListDo  $(OEM_ABANDON_OPTIONS)
        DEBUG-OUTPUT "Remove component: "$($)
        Ifstr(i) $($) == $(ProductLOOPName)
            Set UseSvcctrl = "NO"
        Else
            Set UseSvcctrl = "YES"
        Endif
        Shell $(UtilityInf), RemoveService, $($), $(UseSvcctrl)
    EndForListDo
;
;-----  Remove info from the Winsock entry
;
    Shell $(UtilityInf), RemoveWinsockInfo,+
          $(Product$(Option)Name)
;
;-----
;
    goto end

;---------------------------------------------------------------------
;       This section handles the removal of the driver
;---------------------------------------------------------------------
UpgradeSoftware = +
    ; Upgrade software component
    ;
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)

        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif

        ; Upgrade the version number
        ;
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}

        Shell $(UtilityInf), UpdateWinsockMappings, $(Product$(ThisOption)Name), $(Product$(ThisOption)WshDllPath)

        ifstr(i) $($R0) != NO_ERROR
            goto fatal
        endif

        ;
        ; do nothing for update
        ;
        CloseRegKey $(KeyProduct)
    else
        ;
        ; Cannot Open software key, goto ERROR
        ;
        goto fatalregistry
    endif

    goto end
;
;----- Everything was OK
;
successful = +
    goto end
;
;-----
;
infomsg =+
   read-syms InfoDlg
   ui start "Warning"
   set CommonStatus = STATUS_USERCANCEL
   goto end
;
;-----
;
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
;
;-----
;
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
;
;-----
;
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
;
;-----
;
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Ifint $(BillboardVisible) != 0
        Shell "subroutn.inf" PopBillboard
        Set BillboardVisible = 0
    Endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
   goto setfailed
;
;-----
;
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
;
;-----
;
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto removeadapter
    endif
    goto end
;
;-----
;
end = +
    goto term
;
;-----
;
term = +
    Return $(CommonStatus)

;**********************************************************************
;       Create the configuration
;**********************************************************************
[CreateMcsXnsConfiguration]
    read-syms GeneralConstants
    Set McsXnsSvcKeyHandle = $($0)
    Debug-Output "OEMNXPXN.INF: installing McsXns configuration:"
;
;-----  Create the NetConfig Entry
;
    CreateRegKey $(McsXnsSvcKeyHandle) {"NetConfig",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyNetConfig
;
;-----  Create the driver entries (1)
;
    CreateRegKey $(KeyNetConfig) {"Driver01",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDriver

    Shell $(UtilityInf) AddValueList, $(KeyDriver),+
        {{"AdapterName",   $(NoTitle), $(!REG_VT_SZ),   ""} +
         {"NetworkNumber", $(NoTitle), $(!REG_VT_DWORD), 1} +
         {"WindowSize",   $(NoTitle), $(!REG_VT_DWORD), 0} +
         {"MaxPktSize",   $(NoTitle), $(!REG_VT_DWORD), 0}}

    CloseRegKey $(KeyDriver)
;
;-----  Create the driver entries (2)
;
    CreateRegKey $(KeyNetConfig) {"Driver02",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDriver

    Shell $(UtilityInf) AddValueList, $(KeyDriver),+
        {{"AdapterName",   $(NoTitle), $(!REG_VT_SZ),   ""} +
         {"NetworkNumber", $(NoTitle), $(!REG_VT_DWORD), 0} +
         {"WindowSize",   $(NoTitle), $(!REG_VT_DWORD), 0} +
         {"MaxPktSize",   $(NoTitle), $(!REG_VT_DWORD), 0}}

    CloseRegKey $(KeyDriver)
;
;-----  Create the driver entries (3)
;
    CreateRegKey $(KeyNetConfig) {"Driver03",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDriver

    Shell $(UtilityInf) AddValueList, $(KeyDriver),+
        {{"AdapterName",   $(NoTitle), $(!REG_VT_SZ),   ""} +
         {"NetworkNumber", $(NoTitle), $(!REG_VT_DWORD), 0} +
         {"WindowSize",   $(NoTitle), $(!REG_VT_DWORD), 0} +
         {"MaxPktSize",   $(NoTitle), $(!REG_VT_DWORD), 0}}

    CloseRegKey $(KeyDriver)
;
;-----  Create the driver entries (4)
;
    CreateRegKey $(KeyNetConfig) {"Driver04",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDriver

    Shell $(UtilityInf) AddValueList, $(KeyDriver),+
        {{"AdapterName",   $(NoTitle), $(!REG_VT_SZ),   ""} +
         {"NetworkNumber", $(NoTitle), $(!REG_VT_DWORD), 0} +
         {"WindowSize",   $(NoTitle), $(!REG_VT_DWORD), 0} +
         {"MaxPktSize",   $(NoTitle), $(!REG_VT_DWORD), 0}}

    CloseRegKey $(KeyDriver)
;
;-----  Create the driver entries (5)
;
    CreateRegKey $(KeyNetConfig) {"Driver05",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyDriver

    Shell $(UtilityInf) AddValueList, $(KeyDriver),+
        {{"AdapterName",   $(NoTitle), $(!REG_VT_SZ),   ""} +
         {"NetworkNumber", $(NoTitle), $(!REG_VT_DWORD), 0} +
         {"WindowSize",   $(NoTitle), $(!REG_VT_DWORD), 0} +
         {"MaxPktSize",   $(NoTitle), $(!REG_VT_DWORD), 0}}

    CloseRegKey $(KeyDriver)
;
;-----  Close the NetConfig key
;
    CloseRegKey $(KeyNetConfig)
;
;-----  All Done
;
CreateMcsXnsConfigDone = +
    Debug-Output "OEMNXPXN.INF: installing McsXns.....done."
    Return NO_ERROR

;********************************************************************
;********************************************************************
[Install-Option]
    set STF_VITAL = ""
;
;----- Add files to the copy list
;
    ifstr(i) $(AddCopy) == "YES"
        Debug-Output "OEMNXPXN.INF: Adding files to copy list"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
        AddSectionFilesToCopyList Files-MCSXNSEXE $(SrcDir) $(!STF_WINDOWSSYSPATH)
    endif
;
;-----  Copy the files over
;
    ifstr(i) $(DoCopy) == "YES"
       Debug-Output "OEMNXPXN.INF: Copying Files"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif

    ifstr(i) $(DoConfig) == "YES"
    endif

    Exit
;********************************************************************
;********************************************************************
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
;
;-----
;
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-MCSXNSEXE $(SrcDir) $(!STF_WINDOWSSYSPATH)
;
;-----
;
   Exit

;********************************************************************
;********************************************************************
[Source Media Descriptions]
    1  = "MCS XNS/UB Installation Disk"  , TAGFILE = mcsxnsvc.exe
;********************************************************************
;********************************************************************
[Files-Inf]
1, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-MCSXNS]
1, mcsxns.sys,   SIZE=42496
1, ubnb.sys,  SIZE=33792
[Files-MCSXNSEXE]
1, mcsxnsvc.exe, SIZE=19456
1, ubnbsvc.exe,  SIZE=14848
1, xnscfg.dll,   SIZE=14848
1, wshxns.dll,   SIZE=14848
1, xnsmsg.dll,   SIZE=10000
1, ubnbmsg.dll,  SIZE=10000