/*++ Copyright (C) Microsoft Corporation, 1999 - 1999 Module Name: ideuser.h Abstract: These are the structures and defines that are used in the PCI IDE mini drivers. Revision History: --*/ #if !defined (___ideuser_h___) #define ___ideuser_h___ //@@BEGIN_DDKSPLIT typedef enum { DeviceUnknown = 0, DeviceIsAta, DeviceIsAtapi, DeviceNotExist } IDE_DEVICETYPE; typedef enum { DdlPioOnly = 0, DdlFirmwareOk, DdlAlways } DMADETECTIONLEVEL; #define DMA_DETECTION_LEVEL_REG_KEY L"DmaDetectionLevel" #define PCMCIA_IDE_CONTROLLER_HAS_SLAVE L"PcmciaIdeHasSlaveDevice" #define MASTER_DEVICE_TIMEOUT L"MasterDeviceDetectionTimeout" #define SLAVE_DEVICE_TIMEOUT L"SlaveDeviceDetectionTimeout" #define MASTER_DEVICE_TYPE_REG_KEY L"MasterDeviceType" #define SLAVE_DEVICE_TYPE_REG_KEY L"SlaveDeviceType" #define MASTER_DEVICE_TYPE2_REG_KEY L"MasterDeviceType2" #define SLAVE_DEVICE_TYPE2_REG_KEY L"SlaveDeviceType2" #define USER_MASTER_DEVICE_TYPE_REG_KEY L"UserMasterDeviceType" #define USER_SLAVE_DEVICE_TYPE_REG_KEY L"UserSlaveDeviceType" #define USER_MASTER_DEVICE_TYPE2_REG_KEY L"UserMasterDeviceType2" #define USER_SLAVE_DEVICE_TYPE2_REG_KEY L"UserSlaveDeviceType2" #define MASTER_DEVICE_TIMING_MODE L"MasterDeviceTimingMode" #define SLAVE_DEVICE_TIMING_MODE L"SlaveDeviceTimingMode" #define MASTER_DEVICE_TIMING_MODE2 L"MasterDeviceTimingMode2" #define SLAVE_DEVICE_TIMING_MODE2 L"SlaveDeviceTimingMode2" #define MASTER_DEVICE_TIMING_MODE_ALLOWED L"MasterDeviceTimingModeAllowed" #define SLAVE_DEVICE_TIMING_MODE_ALLOWED L"SlaveDeviceTimingModeAllowed" #define MASTER_DEVICE_TIMING_MODE_ALLOWED2 L"MasterDeviceTimingModeAllowed2" #define SLAVE_DEVICE_TIMING_MODE_ALLOWED2 L"SlaveDeviceTimingModeAllowed2" #define USER_MASTER_DEVICE_TIMING_MODE_ALLOWED L"UserMasterDeviceTimingModeAllowed" #define USER_SLAVE_DEVICE_TIMING_MODE_ALLOWED L"UserSlaveDeviceTimingModeAllowed" #define USER_MASTER_DEVICE_TIMING_MODE_ALLOWED2 L"UserMasterDeviceTimingModeAllowed2" #define USER_SLAVE_DEVICE_TIMING_MODE_ALLOWED2 L"UserSlaveDeviceTimingModeAllowed2" #define MASTER_IDDATA_CHECKSUM L"MasterIdDataCheckSum" #define SLAVE_IDDATA_CHECKSUM L"SlaveIdDataCheckSum" #define MASTER_IDDATA_CHECKSUM2 L"MasterIdDataCheckSum2" #define SLAVE_IDDATA_CHECKSUM2 L"SlaveIdDataCheckSum2" //@@END_DDKSPLIT #define PIO_MODE0 (1 << 0) #define PIO_MODE1 (1 << 1) #define PIO_MODE2 (1 << 2) #define PIO_MODE3 (1 << 3) #define PIO_MODE4 (1 << 4) #define SWDMA_MODE0 (1 << 5) #define SWDMA_MODE1 (1 << 6) #define SWDMA_MODE2 (1 << 7) #define MWDMA_MODE0 (1 << 8) #define MWDMA_MODE1 (1 << 9) #define MWDMA_MODE2 (1 << 10) #define UDMA_MODE0 (1 << 11) #define UDMA_MODE1 (1 << 12) #define UDMA_MODE2 (1 << 13) #define UDMA_MODE3 (1 << 14) #define UDMA_MODE4 (1 << 15) #define UDMA_MODE5 (1 << 16) #define PIO_SUPPORT (PIO_MODE0 | PIO_MODE1 | PIO_MODE2 | PIO_MODE3 | PIO_MODE4) #define SWDMA_SUPPORT (SWDMA_MODE0 | SWDMA_MODE1 | SWDMA_MODE2) #define MWDMA_SUPPORT (MWDMA_MODE0 | MWDMA_MODE1 | MWDMA_MODE2) #define UDMA33_SUPPORT (UDMA_MODE0 | UDMA_MODE1 | UDMA_MODE2) #define UDMA66_SUPPORT (UDMA_MODE3 | UDMA_MODE4) #define UDMA100_SUPPORT (UDMA_MODE5 ) #define UDMA_SUPPORT (UNINITIALIZED_TRANSFER_MODE & (~(PIO_SUPPORT | SWDMA_SUPPORT | MWDMA_SUPPORT))) #define DMA_SUPPORT (SWDMA_SUPPORT | MWDMA_SUPPORT | UDMA_SUPPORT) #define ALL_MODE_SUPPORT (PIO_SUPPORT | DMA_SUPPORT) #define PIO0 0 #define PIO1 1 #define PIO2 2 #define PIO3 3 #define PIO4 4 #define SWDMA0 5 #define SWDMA1 6 #define SWDMA2 7 #define MWDMA0 8 #define MWDMA1 9 #define MWDMA2 10 #define UDMA0 11 #define MAX_XFER_MODE 17 #define UNINITIALIZED_CYCLE_TIME 0xffffffff #define UNINITIALIZED_TRANSFER_MODE 0x7fffffff #define IS_DEFAULT(mode) (!(mode & 0x80000000)) #define GenTransferModeMask(i, mode) {\ ULONG temp=0xffffffff; \ mode |= (temp >> (31-(i)));\ } // // mode should not be 0 // #define GetHighestTransferMode(mode, i) {\ ULONG temp=(mode); \ ASSERT(temp); \ i=0; \ while ( temp) { \ temp = (temp >> 1);\ i++;\ } \ i--; \ } #define GetHighestDMATransferMode(mode, i) {\ ULONG temp=mode >> 5;\ i=5; \ while ( temp) { \ temp = (temp >> 1); \ i++; \ } \ i--; \ } #define GetHighestPIOTransferMode(mode, i) { \ ULONG temp = (mode & PIO_SUPPORT); \ i=0; \ temp = temp >> 1; \ while (temp) { \ temp = temp >> 1; \ i++; \ } \ } #define SetDefaultTiming(timingTable, length) {\ timingTable[0]=PIO_MODE0_CYCLE_TIME; \ timingTable[1]=PIO_MODE1_CYCLE_TIME; \ timingTable[2]=PIO_MODE2_CYCLE_TIME; \ timingTable[3]=PIO_MODE3_CYCLE_TIME; \ timingTable[4]=PIO_MODE4_CYCLE_TIME; \ timingTable[5]=SWDMA_MODE0_CYCLE_TIME; \ timingTable[6]=SWDMA_MODE1_CYCLE_TIME; \ timingTable[7]=SWDMA_MODE2_CYCLE_TIME; \ timingTable[8]=MWDMA_MODE0_CYCLE_TIME; \ timingTable[9]=MWDMA_MODE1_CYCLE_TIME; \ timingTable[10]=MWDMA_MODE2_CYCLE_TIME; \ timingTable[11]=UDMA_MODE0_CYCLE_TIME; \ timingTable[12]=UDMA_MODE1_CYCLE_TIME; \ timingTable[13]=UDMA_MODE2_CYCLE_TIME; \ timingTable[14]=UDMA_MODE3_CYCLE_TIME; \ timingTable[15]=UDMA_MODE4_CYCLE_TIME; \ timingTable[16]=UDMA_MODE5_CYCLE_TIME; \ length = MAX_XFER_MODE; \ } #endif // ___ideuser_h___