#include "precomp.h" // // OE.C // Order Encoder, display driver side // // Copyright(c) Microsoft 1997- // // // Number of entries in the font alias table. // #define NUM_ALIAS_FONTS 3 // // Define entries in the Font Alias table. This table is used to convert // non-existant fonts (used by certain widely used applications) into // something we can use as a local font. // // The font names that we alias are: // // "Helv" // This is used by Excel. It is mapped directly onto "MS Sans Serif". // // "MS Dialog" // This is used by Word. It is the same as an 8pt bold MS Sans Serif. // We actually map it to a "MS Sans Serif" font that is one pel narrower // than the metrics specify (because all matching is done on non-bold // fonts) - hence the 1 value in the charWidthAdjustment field. // // "MS Dialog Light" // Added as part of the Win95 performance enhancements...Presumably for // MS-Word... // // FONT_ALIAS_TABLE fontAliasTable[NUM_ALIAS_FONTS] = { { "Helv", "MS Sans Serif", 0 }, { "MS Dialog", "MS Sans Serif", 1 }, { "MS Dialog Light", "MS Sans Serif", 0 } }; // // FUNCTION: OE_SendAsOrder see oe.h // BOOL OE_SendAsOrder(DWORD order) { BOOL rc = FALSE; DebugEntry(OE_SendAsOrder); // // Only check the order if we are allowed to send orders in the first // place! // if (g_oeSendOrders) { TRACE_OUT(("Orders enabled")); // // We are sending some orders, so check individual flags. // rc = (BOOL)g_oeOrderSupported[HIWORD(order)]; TRACE_OUT(("Send order %lx HIWORD %hu", order, HIWORD(order))); } DebugExitDWORD(OE_SendAsOrder, rc); return(rc); } // // OE_RectIntersectsSDA - see oe.h // BOOL OE_RectIntersectsSDA(LPRECT pRect) { RECT rectVD; BOOL fIntersection = FALSE; UINT i; DebugEntry(OE_RectIntersectsSDA); // // Copy the supplied rectangle, converting to inclusive Virtual // Desktop coords. // rectVD.left = pRect->left; rectVD.top = pRect->top; rectVD.right = pRect->right - 1; rectVD.bottom = pRect->bottom - 1; // // Loop through each of the bounding rectangles checking for // an intersection with the supplied rectangle. // for (i = 0; i <= BA_NUM_RECTS; i++) { if ( (g_baBounds[i].InUse) && (g_baBounds[i].Coord.left <= rectVD.right) && (g_baBounds[i].Coord.top <= rectVD.bottom) && (g_baBounds[i].Coord.right >= rectVD.left) && (g_baBounds[i].Coord.bottom >= rectVD.top) ) { TRACE_OUT(("Rect(%d,%d)(%d,%d) intersects SDA(%d,%d)(%d,%d)", rectVD.left, rectVD.top, rectVD.right, rectVD.bottom, g_baBounds[i].Coord.left, g_baBounds[i].Coord.top, g_baBounds[i].Coord.right, g_baBounds[i].Coord.bottom)); fIntersection = TRUE; break; } } DebugExitDWORD(OE_RectIntersectsSDA, fIntersection); return(fIntersection); } // // DrvBitBlt - see NT DDK documentation. // BOOL DrvBitBlt( SURFOBJ *psoDst, SURFOBJ *psoSrc, SURFOBJ *psoMask, CLIPOBJ *pco, XLATEOBJ *pxlo, RECTL *prclDst, POINTL *pptlSrc, POINTL *pptlMask, BRUSHOBJ *pbo, POINTL *pptlBrush, ROP4 rop4 ) { LPOSI_PDEV ppdev = (LPOSI_PDEV)psoDst->dhpdev; BOOL rc = TRUE; UINT orderType = 0; BYTE rop3; LPINT_ORDER pOrder = NULL; LPDSTBLT_ORDER pDstBlt; LPSCRBLT_ORDER pScrBlt; LPMEMBLT_ORDER pMemBlt; LPMEM3BLT_ORDER pMem3Blt; BOOL fSendOrder = FALSE; BOOL fAccumulate = FALSE; UINT fOrderFlags = OF_SPOILABLE; RECT bounds; RECT intersectRect; POINT origin; POE_BRUSH_DATA pCurrentBrush; MEMBLT_ORDER_EXTRA_INFO memBltExtraInfo; DebugEntry(DrvBitBlt); // // DO THIS _BEFORE_ TAKING LOCKS // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get the bounding rectangle for the operation. // RECT_FROM_RECTL(bounds, (*prclDst)); // // Check if we are accumulating data for this function // fAccumulate = OEAccumulateOutput(psoDst, pco, &bounds); if (!fAccumulate) { DC_QUIT; } // // Convert the data to virtual coordinates. // OELRtoVirtual(&bounds, 1); // // Check if this 4-way ROP simplifies to a 3-way ROP. A 4-way ROP // contains two 3-way ROPS, one for each setting of a mask bit - the // high ROP3 corresponds to a value of zero in the mask bit. // // If the two 3-way ROPs are the same, we know the 4-way ROP is a 3-way // ROP. // if (ROP3_LOW_FROM_ROP4(rop4) == ROP3_HIGH_FROM_ROP4(rop4)) { // // Take the high byte as the 3-way ROP. // rop3 = ROP3_HIGH_FROM_ROP4(rop4); TRACE_OUT(( "4-way ROP %04x is really 3-way %02x", rop4, rop3)); } else { TRACE_OUT(( "4-way ROP %08x", rop4)); DC_QUIT; } // // Determine the command type. It can be one of the following. // // DSTBLT - A destination only BLT (no source, or pattern) // PATBLT - a pattern BLT (no source) // SCRBLT - a screen to screen BLT // MEMBLT - a memory to screen BLT (no pattern) // MEM3BLT - a memory to screen 3-way BLT // // // Check for destination only BLTs (ie. independent of source bits). // if ((psoSrc == NULL) || ROP3_NO_SOURCE(rop3)) { // // Check for a pattern or true destination BLT. // if (ROP3_NO_PATTERN(rop3)) { TRACE_OUT(( "DSTBLT")); orderType = ORD_DSTBLT; } else { TRACE_OUT(( "PATBLT")); orderType = ORD_PATBLT; } } else { // // We have a source BLT, check whether we have screen or memory // BLTs. // if (psoSrc->hsurf != ppdev->hsurfScreen) { if (psoDst->hsurf != ppdev->hsurfScreen) { ERROR_OUT(( "MEM to MEM blt!")); } else { // // We have a memory to screen BLT, check which type. // if ((ppdev->cBitsPerPel == 4) && (rop3 != 0xcc)) { // // No order -- the result depends on the palette // which is dicy in VGA // TRACE_OUT(("No order on VGA for rop 0x%02x", rop3)); DC_QUIT; } if (ROP3_NO_PATTERN(rop3)) { TRACE_OUT(( "MEMBLT")); orderType = ORD_MEMBLT; } else { TRACE_OUT(( "MEM3BLT")); orderType = ORD_MEM3BLT; } } } else { if (psoDst->hsurf != ppdev->hsurfScreen) { TRACE_OUT(( "SCR to MEM blt!")); } else { // // We only support destination only screen BLTs (ie. no // patterns allowed). // if (ROP3_NO_PATTERN(rop3)) { TRACE_OUT(( "SCRBLT")); orderType = ORD_SCRBLT; } else { TRACE_OUT(( "Unsupported screen ROP %x", rop3)); } } } } // // Check if we have a supported order. // if (orderType == 0) { TRACE_OUT(( "Unsupported BLT")); fAccumulate = FALSE; DC_QUIT; } // // Check if we are allowed to send this order (determined by the // negotiated capabilities of all the machines in the conference). // if (!OE_SendAsOrder(orderType)) { TRACE_OUT(( "Order %d not allowed", orderType)); DC_QUIT; } // // Check if we are allowed to send the ROP. // if (!OESendRop3AsOrder(rop3)) { TRACE_OUT(( "Cannot send ROP %d", rop3)); DC_QUIT; } // // Check for overcomplicated clipping. // if (OEClippingIsComplex(pco)) { TRACE_OUT(( "Clipping is too complex")); DC_QUIT; } // // If this is a Memblt, do an initial check on whether it is cachable // if ((orderType == ORD_MEMBLT) || (orderType == ORD_MEM3BLT)) { // // We have to fill in a structure containing extra into // specifically for a MEM(3)BLT order. // memBltExtraInfo.pSource = psoSrc; memBltExtraInfo.pDest = psoDst; memBltExtraInfo.pXlateObj = pxlo; if (!SBC_DDIsMemScreenBltCachable(&memBltExtraInfo)) { TRACE_OUT(( "MemBlt is not cachable")); DC_QUIT; } // // It is cachable. Before we get SBC to do the caching, we have to // allow it to queue a color table (if required). // if (!SBC_DDMaybeQueueColorTable(ppdev)) { TRACE_OUT(( "Unable to queue color table for MemBlt")); DC_QUIT; } } // // We have a recognised order - do the specific checks for each order. // switch (orderType) { case ORD_DSTBLT: // // Allocate the memory for the order. // pOrder = OA_DDAllocOrderMem(sizeof(DSTBLT_ORDER),0); if (pOrder == NULL) { TRACE_OUT(( "Failed to alloc order")); DC_QUIT; } pDstBlt = (LPDSTBLT_ORDER)pOrder->abOrderData; // // Set the spoiler flag if the rop is opaque. // if (ROP3_IS_OPAQUE(rop3)) { fOrderFlags |= OF_SPOILER; } // // Store the order type. // pDstBlt->type = LOWORD(orderType); // // Virtual desktop co-ordinates. // pDstBlt->nLeftRect = bounds.left; pDstBlt->nTopRect = bounds.top; pDstBlt->nWidth = bounds.right - bounds.left + 1; pDstBlt->nHeight = bounds.bottom - bounds.top + 1; pDstBlt->bRop = rop3; TRACE_OUT(( "DstBlt X %d Y %d w %d h %d rop %02X", pDstBlt->nLeftRect, pDstBlt->nTopRect, pDstBlt->nWidth, pDstBlt->nHeight, pDstBlt->bRop)); break; case ORD_PATBLT: if ( !OEEncodePatBlt(ppdev, pbo, pptlBrush, rop3, &bounds, &pOrder) ) { // // Something went wrong with the encoding, so skip to the // end to add this operation to the SDA. // DC_QUIT; } fOrderFlags = pOrder->OrderHeader.Common.fOrderFlags; break; case ORD_SCRBLT: // // Check for a SCRBLT as a result of a Desktop Scroll. We must // ignore these as they will stuff the remote desktop. // // The check is simple - if the virtual position of the source // is the same as the virual position of the target for a // SRCCOPY type SCRBLT, we have a hit... // POINT_FROM_POINTL(origin, (*pptlSrc)); // // Allocate the memory for the order. // pOrder = OA_DDAllocOrderMem(sizeof(SCRBLT_ORDER),0); if (pOrder == NULL) { TRACE_OUT(( "Failed to alloc order")); DC_QUIT; } pScrBlt = (LPSCRBLT_ORDER)pOrder->abOrderData; // // Store the order type. // pScrBlt->type = LOWORD(orderType); // // All data which is sent over the wire must be in virtual // desktop co-ordinates. OELRtoVirtual has already converted // bounds to an inclusive rectangle in virtual co-ordinates. // pScrBlt->nLeftRect = bounds.left; pScrBlt->nTopRect = bounds.top; pScrBlt->nWidth = bounds.right - bounds.left + 1; pScrBlt->nHeight = bounds.bottom - bounds.top + 1; pScrBlt->bRop = rop3; // // Source point on the screen. // OELPtoVirtual(&origin, 1); pScrBlt->nXSrc = origin.x; pScrBlt->nYSrc = origin.y; // // Screen to screen blts are Blocking orders (i.e. they // prevent any previous orders from being spoilt). // // We do not mark Screen to Screen blts as SPOILER orders. If // the ROP is opaque we could spoil the destination rect, but // only the area that does not overlap with the src rectangle. // The most common use of Screen to Screen blts is scrolling, // where the src and dst rects almost completely overlap, // giving only a small "spoiler" region. The spoiler region // could also be complex (more that 1 rect). // // Consequently, the potential gains of trying to spoil using // these orders are small compared to the complexity of the // code required. // // fOrderFlags |= OF_BLOCKER; // // If the blt is screen to screen and the source overlaps the // destination and the clipping is not simple (> 1 rect) then // we do not want to send this as an order. // // (This is because we would need some complex code to // calculate the order in which to blt through each of the clip // rects. As this case is pretty rare, it seems reasonable to // just send it as Screen Data). // if (!OEClippingIsSimple(pco)) { // // Calculate the overlapping rectangle. // intersectRect.left = max(pScrBlt->nLeftRect, pScrBlt->nXSrc); intersectRect.right = min( pScrBlt->nLeftRect + pScrBlt->nWidth-1, pScrBlt->nXSrc + pScrBlt->nWidth-1 ); intersectRect.top = max(pScrBlt->nTopRect, pScrBlt->nYSrc); intersectRect.bottom = min( pScrBlt->nTopRect + pScrBlt->nHeight-1, pScrBlt->nYSrc + pScrBlt->nHeight-1 ); // // Check for a src / dst overlap. If they overlap, the // intersection is a well-ordered non-trivial rectangle. // if ( (intersectRect.left <= intersectRect.right ) && (intersectRect.top <= intersectRect.bottom) ) { // // The src & dest overlap. Free up the order memory // and skip out now. The destination rectangle will be // added to the Screen Data Area. // OA_DDFreeOrderMem(pOrder); DC_QUIT; } } TRACE_OUT(( "ScrBlt x %d y %d w %d h %d sx %d sy %d rop %02X", pScrBlt->nLeftRect, pScrBlt->nTopRect, pScrBlt->nWidth, pScrBlt->nHeight, pScrBlt->nXSrc, pScrBlt->nYSrc, pScrBlt->bRop)); break; case ORD_MEMBLT: // // Allocate the memory for the order - don't use OA as we are // only going to tile this order immediately. Instead, we have // a static buffer to receive the template order data. // pOrder = (LPINT_ORDER)g_oeTmpOrderBuffer; pMemBlt = (LPMEMBLT_ORDER)pOrder->abOrderData; pOrder->OrderHeader.Common.cbOrderDataLength = sizeof(MEMBLT_R2_ORDER); // // Store the order type. // pMemBlt->type = LOWORD(orderType); // // Any data which is sent over the wire must be in virtual // desktop co-ordinates. The bounding rectangle has already // been converted by OELRtoScreen. // pMemBlt->nLeftRect = bounds.left; pMemBlt->nTopRect = bounds.top; pMemBlt->nWidth = bounds.right - bounds.left + 1; pMemBlt->nHeight = bounds.bottom - bounds.top + 1; pMemBlt->bRop = rop3; // // We need to store the source bitmap origin. This is a memory // object, so screen/virtual conversions are unnecessary. // pMemBlt->nXSrc = pptlSrc->x; pMemBlt->nYSrc = pptlSrc->y; // // Mark the order as opaque if necessary. // if (ROP3_IS_OPAQUE(rop3)) { fOrderFlags |= OF_SPOILER; } // // Store the src bitmap handle in the order. // pMemBlt->cacheId = 0; TRACE_OUT(( "MemBlt dx %d dy %d w %d h %d sx %d sy %d rop %04X", pMemBlt->nLeftRect, pMemBlt->nTopRect, pMemBlt->nWidth, pMemBlt->nHeight, pMemBlt->nXSrc, pMemBlt->nYSrc, pMemBlt->bRop)); break; case ORD_MEM3BLT: // // Check that the brush pattern is simple. // if (!OECheckBrushIsSimple(ppdev, pbo, &pCurrentBrush)) { TRACE_OUT(( "Brush is not simple")); orderType = 0; DC_QUIT; } // // Allocate the memory for the order - don't use OA as we are // only going to tile this order immediately. Instead, we have // a static buffer to receive the template order data. // pOrder = (LPINT_ORDER)g_oeTmpOrderBuffer; pMem3Blt = (LPMEM3BLT_ORDER)pOrder->abOrderData; pOrder->OrderHeader.Common.cbOrderDataLength = sizeof(MEM3BLT_R2_ORDER); // // Store the order type. // pMem3Blt->type = LOWORD(orderType); // // All data which is sent over the wire must be in virtual // desktop co-ordinates. OELRtoVirtual has already done this // conversion for us. // pMem3Blt->nLeftRect = bounds.left; pMem3Blt->nTopRect = bounds.top; pMem3Blt->nWidth = bounds.right - bounds.left + 1; pMem3Blt->nHeight = bounds.bottom - bounds.top + 1; pMem3Blt->bRop = rop3; // // We need to store the source bitmap origin. This is a memory // object, so screen/virtual conversions are unnecessary. // pMem3Blt->nXSrc = pptlSrc->x; pMem3Blt->nYSrc = pptlSrc->y; // // Mark the order as opaque if necessary. // if (ROP3_IS_OPAQUE(rop3)) { fOrderFlags |= OF_SPOILER; } // // Store the src bitmap handle in the order. // pMem3Blt->cacheId = 0; // // Set up the information required for the pattern. // pMem3Blt->BackColor = pCurrentBrush->back; pMem3Blt->ForeColor = pCurrentBrush->fore; // // The protocol brush origin is the point on the screen where // we want the brush to start being drawn from (tiling where // necessary). This must be in virtual coordinates. // pMem3Blt->BrushOrgX = pptlBrush->x; pMem3Blt->BrushOrgY = pptlBrush->y; OELPtoVirtual((LPPOINT)&pMem3Blt->BrushOrgX, 1); // // Extra brush data from the data when we realised the brush. // pMem3Blt->BrushStyle = pCurrentBrush->style; pMem3Blt->BrushHatch = pCurrentBrush->style; RtlCopyMemory(pMem3Blt->BrushExtra, pCurrentBrush->brushData, sizeof(pMem3Blt->BrushExtra)); TRACE_OUT(( "Mem3Blt brush %02X %02X dx %d dy %d w %d h %d " "sx %d sy %d rop %04X", pMem3Blt->BrushStyle, pMem3Blt->BrushHatch, pMem3Blt->nLeftRect, pMem3Blt->nTopRect, pMem3Blt->nWidth, pMem3Blt->nHeight, pMem3Blt->nXSrc, pMem3Blt->nYSrc, pMem3Blt->bRop)); break; default: ERROR_OUT(( "New unsupported order %08lx", orderType)); orderType = 0; break; } // // We have generated an order so make sure we send it. // if (orderType != 0) { fSendOrder = TRUE; } DC_EXIT_POINT: // // If we did not send an order, we must accumulate the output in the // Screen Data Area. // if (fSendOrder) { // // Check if the ROP has a dependency on the destination. // if (!ROP3_NO_TARGET(rop3)) { TRACE_OUT(( "ROP has a target dependency")); fOrderFlags |= OF_DESTROP; } // // Store the general order data. The bounding rectagle // co-ordinates must be virtual desktop. OELRtoVirtual has already // converted rect for us. // pOrder->OrderHeader.Common.fOrderFlags = (TSHR_UINT16)fOrderFlags; TSHR_RECT16_FROM_RECT(&pOrder->OrderHeader.Common.rcsDst, bounds); // // Add the order to the cache. Note that we have the new tiled // processing for MEMBLT and MEM3BLT orders. // if ((orderType == ORD_MEMBLT) || (orderType == ORD_MEM3BLT)) { OETileBitBltOrder(pOrder, &memBltExtraInfo, pco); } else { OEClipAndAddOrder(pOrder, NULL, pco); } } else { if (fAccumulate) { OEClipAndAddScreenData(&bounds, pco); } } OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitDWORD(DrvBitBlt, rc); return(rc); } // // DrvStretchBlt - see NT DDK documentation. // BOOL DrvStretchBlt(SURFOBJ *psoDst, SURFOBJ *psoSrc, SURFOBJ *psoMask, CLIPOBJ *pco, XLATEOBJ *pxlo, COLORADJUSTMENT *pca, POINTL *pptlHTOrg, RECTL *prclDst, RECTL *prclSrc, POINTL *pptlMask, ULONG iMode) { BOOL rc = TRUE; RECT rectSrc; RECT rectDst; BOOL fAccumulate = FALSE; POINTL ptlSrc; BOOL usedBitBlt = FALSE; DebugEntry(DrvStretchBlt); // // DO THIS _BEFORE_ TAKING LOCK // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get the source and destination rectangles // RECT_FROM_RECTL(rectSrc, (*prclSrc)); RECT_FROM_RECTL(rectDst, (*prclDst)); // // Check if we are accumulating data for this function // fAccumulate = OEAccumulateOutput(psoDst, pco, &rectDst); if (!fAccumulate) { DC_QUIT; } // // Check that we have a valid ROP code. The NT DDK states that the ROP // code for the StretchBlt is implicit in the mask specification. If a // mask is specified, we have an implicit ROP4 of 0xCCAA, otherwise the // code is 0xCCCC. // // Our BitBlt code only encodes orders for ROP3s, so we must throw any // StretchBlts with a mask. // if (psoMask != NULL) { TRACE_OUT(( "Mask specified")); DC_QUIT; } // // Check for overcomplicated clipping. // if (OEClippingIsComplex(pco)) { TRACE_OUT(( "Clipping is too complex")); DC_QUIT; } // // Rectangles are now well-ordered, check if we have a degenerate (ie. // no stretch) case. // if ( (rectSrc.right - rectSrc.left == rectDst.right - rectDst.left) && (rectSrc.bottom - rectSrc.top == rectDst.bottom - rectDst.top ) ) { // // This can be passed on to the BitBlt code. // usedBitBlt = TRUE; ptlSrc.x = prclSrc->left; ptlSrc.y = prclSrc->top; rc = DrvBitBlt(psoDst, psoSrc, psoMask, pco, pxlo, prclDst, &ptlSrc, pptlMask, NULL, NULL, 0xCCCC); // // We have stored this object in the BitBlt, so don't store the // data again. // fAccumulate = FALSE; } DC_EXIT_POINT: if (fAccumulate) { // // Convert the data to virtual coordinates. // OELRtoVirtual(&rectDst, 1); // // Update the screen data area // OEClipAndAddScreenData(&rectDst, pco); } OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitDWORD(DrvStretchBlt, rc); return(rc); } // // DrvCopyBits - see NT DDK documentation. // BOOL DrvCopyBits(SURFOBJ *psoDst, SURFOBJ *psoSrc, CLIPOBJ *pco, XLATEOBJ *pxlo, RECTL *prclDst, POINTL *pptlSrc) { // // CopyBits is a fast path for the NT display drivers. In our case it // can always be processed as a BITBLT. // return(DrvBitBlt( psoDst, psoSrc, NULL, pco, pxlo, prclDst, pptlSrc, NULL, NULL, NULL, 0xCCCC)); } // // DrvTextOut - see NT DDK documentation. // BOOL DrvTextOut(SURFOBJ *pso, STROBJ *pstro, FONTOBJ *pfo, CLIPOBJ *pco, RECTL *prclExtra, RECTL *prclOpaque, BRUSHOBJ *pboFore, BRUSHOBJ *pboOpaque, POINTL *pptlOrg, MIX mix) { LPOSI_PDEV ppdev = (LPOSI_PDEV)pso->dhpdev; BOOL rc = TRUE; RECT rectDst; RECT rectText; LPINT_ORDER pOrder; LPINT_ORDER pOpaqueOrder; LPTEXTOUT_ORDER pTextOut; LPEXTTEXTOUT_ORDER pExtTextOut; BOOL fSendOrder = FALSE; BOOL fAccumulate = FALSE; char ansiString[ORD_MAX_STRING_LEN_WITHOUT_DELTAS+2]; ULONG ansiLen; ULONG tempLen; UINT orderType = 0; ULONG maxLength; LPSTR lpVariable; BOOL fMoreData; ULONG count; ULONG i; GLYPHPOS* pGlyphData; int currentDelta; LPVARIABLE_DELTAX lpDeltaPos; UINT fontFlags; UINT fontAscender; UINT fontHeight; UINT fontWidth; UINT fontWeight; UINT fontIndex; POINTL lastPtl; LPCOMMON_TEXTORDER pCommon; POINT startPoint; BOOL sendDeltaX = FALSE; DebugEntry(DrvTextOut); // // DO THIS _BEFORE_ TAKING LOCKS // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get bounding rectangle and convert to a RECT. // if (prclOpaque != NULL) { RECT_FROM_RECTL(rectDst, (*prclOpaque)); } else { RECT_FROM_RECTL(rectDst, pstro->rclBkGround); TRACE_OUT(( "Using STROBJ bgd for size")); } // // Check if we are accumulating data for this function // fAccumulate = OEAccumulateOutput(pso, pco, &rectDst); if (!fAccumulate) { DC_QUIT; } // // Convert to virtual coordinates // OELRtoVirtual(&rectDst, 1); // // Determine which order we will generate // if ( ((pstro->flAccel & SO_FLAG_DEFAULT_PLACEMENT) != 0) && (prclOpaque == NULL) ) { orderType = ORD_TEXTOUT; maxLength = ORD_MAX_STRING_LEN_WITHOUT_DELTAS; } else { orderType = ORD_EXTTEXTOUT; maxLength = ORD_MAX_STRING_LEN_WITH_DELTAS; } // // Check if we are allowed to send this order (determined by the // negotiated capabilities of all the machines in the conference). // if (!OE_SendAsOrder(orderType)) { TRACE_OUT(( "Text order %x not allowed", orderType)); DC_QUIT; } // // Check for a valid brush for the test operation. // if (pboFore->iSolidColor == -1) { TRACE_OUT(( "Bad brush for text fg")); DC_QUIT; } if (pboOpaque->iSolidColor == -1) { TRACE_OUT(( "Bad brush for text bg")); DC_QUIT; } // // Check that we don't have any modifiers rects on the font // if (prclExtra != NULL) { TRACE_OUT(( "Unsupported extra rects")); DC_QUIT; } // // Check that text orientation is OK. // if (pstro->flAccel & OE_BAD_TEXT_MASK) { TRACE_OUT(("DrvTextOut - unsupported flAccel 0x%08x", pstro->flAccel)); DC_QUIT; } // // Check we have a valid string. // if (pstro->pwszOrg == NULL) { TRACE_OUT(( "No string - opaque %x", prclOpaque)); DC_QUIT; } // // Check for overcomplicated clipping. // if (OEClippingIsComplex(pco)) { TRACE_OUT(( "Clipping is too complex")); DC_QUIT; } // // Convert the string to an ANSI representation. // RtlFillMemory(ansiString, sizeof(ansiString), 0); EngUnicodeToMultiByteN(ansiString, maxLength, &ansiLen, pstro->pwszOrg, pstro->cGlyphs * sizeof(WCHAR)); // // The conversion claims it never fails, but we have seen results that // are completely different on the remote box. So we convert the ANSI // string back to UNICODE and check that we still have what we started // with. // EngMultiByteToUnicodeN(g_oeTempString, sizeof(g_oeTempString), &tempLen, ansiString, ansiLen); // // Check we don't have too much data, or that the translation failed to // give the correct data. This happens when we try to translate // UNICODE text. // if ( (tempLen != pstro->cGlyphs * sizeof(WCHAR)) || (memcmp(pstro->pwszOrg, g_oeTempString, tempLen) != 0) ) { TRACE_OUT(( "String not translated")); DC_QUIT; } // // Check that the font is valid. // if (!OECheckFontIsSupported(pfo, ansiString, ansiLen, &fontHeight, &fontAscender, &fontWidth, &fontWeight, &fontFlags, &fontIndex, &sendDeltaX)) { TRACE_OUT(( "Unsupported font for '%s'", ansiString)); // // Check if there is an opaque rectangle. If so it is worth // splitting this out. Word can output an entire line comprising a // single character followed by background, eg bullets, where the // line is blanked by drawing the bullet character at the start of // the line followed by a large - >1000 pixel - opaque rect. // Splitting the opaque rect from the text means we can send a // small area of SD for the unmatched font char while encoding the // large opaque rectangle. // if ( (prclOpaque != NULL) && (pstro->cGlyphs == 1) && (pstro->flAccel & SO_HORIZONTAL) && OE_SendAsOrder(ORD_PATBLT)) { // // There is an opaque rectangle and a single char. // Encode the opaque rectangle. First get a copy of the target // rect so we can use it later (and flip it into screen // coordinates). // TRACE_OUT(( "Have 1 char + opaque rect")); rectText.left = rectDst.left; rectText.top = rectDst.top; rectText.right = rectDst.right + 1; rectText.bottom = rectDst.bottom + 1; // // Call into the PATBLT encoding function. // if ( !OEEncodePatBlt(ppdev, pboOpaque, pptlOrg, OE_COPYPEN_ROP, &rectDst, &pOpaqueOrder) ) { // // Something went wrong with the encoding, so skip to the // end to add this operation to the SDA. // TRACE_OUT(( "Failed to encode opaque rect")); DC_QUIT; } // // Store the general order data. The bounding rectagle // co-ordinates must be virtual desktop. OELRtoVirtual has // already converted rect for us. // TSHR_RECT16_FROM_RECT(&pOpaqueOrder->OrderHeader.Common.rcsDst, rectDst); // // Add the order to the cache. // OEClipAndAddOrder(pOpaqueOrder, NULL, pco); // // Calculate the bounds of the text. Get the glyph positions // for the left and right, and assume the top and bottom equate // approximately to the opaque rectangle. // if ( pstro->pgp == NULL) { // // The string object doesn't contain the GLYPHPOS info, so // enumerate the glyphs. // TRACE_OUT(( "Enumerate glyphs")); STROBJ_vEnumStart(pstro); STROBJ_bEnum(pstro, &count, &pGlyphData); } else { // // The string object already contains the GLYPHPOS info, so // just grab the pointer to it. // pGlyphData = pstro->pgp; } rectDst = rectText; rectDst.left = max(rectDst.left, pGlyphData[0].ptl.x); if ( pstro->ulCharInc == 0 ) { // // No character increment for this string object. Just use // the maximum glyph width to calculate the right bounding // edge. // TRACE_OUT(( "no charinc glyph %d trg %d left %d maxX %d", pGlyphData[0].ptl.x, rectDst.right, rectDst.left, pfo->cxMax)); rectDst.right = min(rectDst.right, (int)(pGlyphData[0].ptl.x + pfo->cxMax - 1)); } else { // // The string object has a character increment, so use it // to determine the right bounding edge. // TRACE_OUT(( "charinc %x glyph %d trg %d left %d", pstro->ulCharInc, pGlyphData[0].ptl.x, rectDst.right, rectDst.left)); rectDst.right = min(rectDst.right, (int)(pGlyphData[0].ptl.x + pstro->ulCharInc - 1)); } // // Flip the target rectangle back to virtual coordinates. // rectDst.right -= 1; rectDst.bottom -= 1; } // // Skip to the end to add to the SDA. // DC_QUIT; } // // It is possible that the font matching blows our previous decision to // generate a TextOut order and we need to generate an ExtTextOut order // instead. We need to reverify our parameters if this is the case. // if ((sendDeltaX) && (orderType != ORD_EXTTEXTOUT)) { TRACE_OUT(( "Text order must be EXTTEXTOUT")); // // Set up for ExtTexOut orders. // orderType = ORD_EXTTEXTOUT; maxLength = ORD_MAX_STRING_LEN_WITH_DELTAS; // // Check if we are allowed to send this order (determined by the // negotiated capabilities of all the machines in the conference). // if (!OE_SendAsOrder(orderType)) { TRACE_OUT(( "Text order %x not allowed", orderType)); DC_QUIT; } // // Make sure we haven't blown the order size. // if (pstro->cGlyphs > maxLength) { TRACE_OUT(( "Text limit blown", pstro->cGlyphs)); DC_QUIT; } } // // Get the proper start position for the text. // if ( pstro->pgp == NULL) { STROBJ_vEnumStart(pstro); STROBJ_bEnum(pstro, &count, &pGlyphData); if (count == 0) { WARNING_OUT(( "No glyphs")); DC_QUIT; } } else { pGlyphData = pstro->pgp; } startPoint.x = pGlyphData[0].ptl.x; // // Check if we should be using baseline alignment for the y // coordinate. If we should be, the value in the glyph data is // correct. If not, we the y coordinate is for the top of the // text, and we have to calculate it. // if (g_oeBaselineTextEnabled) { startPoint.y = pGlyphData[0].ptl.y; fontFlags |= NF_BASELINE; } else { startPoint.y = pGlyphData[0].ptl.y - fontAscender; } // // Allocate memory for the order // switch (orderType) { case ORD_TEXTOUT: { // // Allocate the memory // pOrder = OA_DDAllocOrderMem((UINT)( sizeof(TEXTOUT_ORDER) - ORD_MAX_STRING_LEN_WITHOUT_DELTAS + ansiLen ), 0); if (pOrder == NULL) { TRACE_OUT(( "Failed to alloc order")); DC_QUIT; } pTextOut = (LPTEXTOUT_ORDER)pOrder->abOrderData; // // Set up the order type. // pTextOut->type = ORD_TEXTOUT_TYPE; // // Get a pointer to the fields which are common to both TextOut // and ExtTextOut // pCommon = &pTextOut->common; } break; case ORD_EXTTEXTOUT: { // // BOGUS LAURABU // This allocates space for a deltax array whether or not one is needed // // // Allocate the memory // pOrder = OA_DDAllocOrderMem((UINT)( sizeof(EXTTEXTOUT_ORDER) - ORD_MAX_STRING_LEN_WITHOUT_DELTAS - (ORD_MAX_STRING_LEN_WITH_DELTAS * sizeof(TSHR_INT32)) + ansiLen * (sizeof(TSHR_INT32) + 1) + 4), // Allow for internal padding 0); if (pOrder == NULL) { TRACE_OUT(( "Failed to alloc order")); DC_QUIT; } pExtTextOut = (LPEXTTEXTOUT_ORDER)pOrder->abOrderData; // // Set up the order type. // pExtTextOut->type = ORD_EXTTEXTOUT_TYPE; // // Get a pointer to the fields which are common to both TextOut // and ExtTextOut // pCommon = &pExtTextOut->common; } break; default: { ERROR_OUT(( "Unknown order %x", orderType)); DC_QUIT; } break; } // // Fill in the fields which are common to both TextOut and ExtTextOut // // Convert to virtual coordinates // OELPtoVirtual(&startPoint, 1); // // The x and y values are available in virtual coords from the bounds // rectangle. // pCommon->nXStart = startPoint.x; pCommon->nYStart = startPoint.y; // // Get the text colours. // OEConvertColor(ppdev, &pCommon->BackColor, pboOpaque->iSolidColor, NULL); OEConvertColor(ppdev, &pCommon->ForeColor, pboFore->iSolidColor, NULL); // // The transparency of the operation is determined by whether we have // an opaque rectangle or not. // pCommon->BackMode = (prclOpaque == NULL) ? TRANSPARENT : OPAQUE; // // NT has a character extra spacing, not a generic for every character // spacing. So, we always set this value to 0. // pCommon->CharExtra = 0; // // NT does not provide a break of any sorts. // pCommon->BreakExtra = 0; pCommon->BreakCount = 0; // // Copy the font details // pCommon->FontHeight = fontHeight; pCommon->FontWidth = fontWidth; pCommon->FontWeight = fontWeight; pCommon->FontFlags = fontFlags; pCommon->FontIndex = fontIndex; // // Now fill in the order specific data // switch (orderType) { case ORD_TEXTOUT: // // Copy across the text string. // pTextOut->variableString.len = (BYTE)ansiLen; RtlCopyMemory(pTextOut->variableString.string, ansiString, ansiLen); // // Make sure we send the order // fSendOrder = TRUE; TRACE_OUT(( "TEXTOUT: X %u Y %u bm %u FC %02X%02X%02X " "BC %02X%02X%02X", pTextOut->common.nXStart, pTextOut->common.nYStart, pTextOut->common.BackMode, pTextOut->common.ForeColor.red, pTextOut->common.ForeColor.green, pTextOut->common.ForeColor.blue, pTextOut->common.BackColor.red, pTextOut->common.BackColor.green, pTextOut->common.BackColor.blue)); TRACE_OUT(( "Font: fx %u fy %u fw %u ff %04x fh %u len %u", pTextOut->common.FontWidth, pTextOut->common.FontHeight, pTextOut->common.FontWeight, pTextOut->common.FontFlags, pTextOut->common.FontIndex, ansiLen)); TRACE_OUT(( "String '%s'", ansiString)); break; case ORD_EXTTEXTOUT: // // Since our text is only ever fully contained within the // opaque rectangle, we only set the opaque flag (and ignore // the clipping). // pExtTextOut->fuOptions = (prclOpaque == NULL) ? 0 : ETO_OPAQUE; // // Set up the bounding rectangle for the operation. // EXT_TEXT_OUT orders use TSHR_RECT32s, hence we can't directly // assign rectDst to it. // pExtTextOut->rectangle.left = rectDst.left; pExtTextOut->rectangle.top = rectDst.top; pExtTextOut->rectangle.right = rectDst.right; pExtTextOut->rectangle.bottom = rectDst.bottom; // // Copy across the text string. // pExtTextOut->variableString.len = ansiLen; RtlCopyMemory(pExtTextOut->variableString.string, ansiString, ansiLen); // // WHOOP WHOOP WHOOP - Prepare to shut your eyes... // // Although we have a defined fixed length structure for // storing ExtTextOut orders, we must not send the full // structure over the network as the text will only be, say, 10 // characters while the structure contains room for 127. // // Hence we pack the structure now to remove all the blank data // BUT we must maintain the natural alignment of the variables. // // So we know the length of the string which we can use to // start the new delta structure at the next 4-byte boundary. // lpVariable = ((LPBYTE)(&pExtTextOut->variableString)) + ansiLen + sizeof(pExtTextOut->variableString.len); lpVariable = (LPSTR) DC_ROUND_UP_4((UINT_PTR)lpVariable); lpDeltaPos = (LPVARIABLE_DELTAX)lpVariable; // // Do we need a delta array, or are the chars at their default // positions. // if ( sendDeltaX || ((pstro->flAccel & SO_FLAG_DEFAULT_PLACEMENT) == 0) ) { // // Store the length of the position deltas. // lpDeltaPos->len = ansiLen * sizeof(TSHR_INT32); // // Set up the position deltas. // STROBJ_vEnumStart(pstro); fMoreData = TRUE; currentDelta = 0; while (fMoreData) { // // Get the next set of glyph data // fMoreData = STROBJ_bEnum(pstro, &count, &pGlyphData); for (i = 0; i < count; i++) { // // The first time through we must set up the first // glyph position. // if ((currentDelta == 0) && (i == 0)) { lastPtl.x = pGlyphData[0].ptl.x; lastPtl.y = pGlyphData[0].ptl.y; TRACE_OUT(( "First Pos %d", lastPtl.x)); } else { // // For subsequent entries, we need to add the // delta on the X position to the array. // if (pstro->ulCharInc == 0) { lpDeltaPos->deltaX[currentDelta] = pGlyphData[i].ptl.x - lastPtl.x; // // Check for delta Y's - which we can't // encode // if (pGlyphData[i].ptl.y - lastPtl.y) { WARNING_OUT(( "New Y %d", pGlyphData[i].ptl.y)); OA_DDFreeOrderMem(pOrder); DC_QUIT; } // // Store the last position for the next // time round. // lastPtl.x = pGlyphData[i].ptl.x; lastPtl.y = pGlyphData[i].ptl.y; TRACE_OUT(( "Next Pos %d %d", i, lastPtl.x)); } else { lpDeltaPos->deltaX[currentDelta] = pstro->ulCharInc; } currentDelta++; } } } // // For the last entry, we need to set up the data by hand // (there are only n-1 deltas for n chars) // // This is done for compatibility with Windows 95 which // requires the last delta to be the delta to the place // where the next char would be if there were n+1 chars in // the string. // if (pstro->ulCharInc == 0) { // // No characters left - fudge a value of the width of // the last character. // lpDeltaPos->deltaX[currentDelta] = pGlyphData[count-1].pgdf->pgb->sizlBitmap.cx; } else { // // All chars are evenly spaced, so just stick the value // in. // lpDeltaPos->deltaX[currentDelta] = pstro->ulCharInc; } // // WHOOP WHOOP WHOOP - You can open your eyes now... // // // We must indicate the presence of this field to the // receiver. // pExtTextOut->fuOptions |= ETO_LPDX; } else { // // Mark the delta array as empty. // lpDeltaPos->len = 0; } // // WHOOP WHOOP WHOOP - You can open your eyes now... // // // Make sure we send the order // fSendOrder = TRUE; TRACE_OUT(( "EXTTEXTOUT: X %u Y %u bm %u FC %02X%02X%02X " "BC %02X%02X%02X", pExtTextOut->common.nXStart, pExtTextOut->common.nYStart, pExtTextOut->common.BackMode, pExtTextOut->common.ForeColor.red, pExtTextOut->common.ForeColor.green, pExtTextOut->common.ForeColor.blue, pExtTextOut->common.BackColor.red, pExtTextOut->common.BackColor.green, pExtTextOut->common.BackColor.blue)); TRACE_OUT(( "Extra: Opt %x X1 %d Y1 %d X2 %d Y2 %d", pExtTextOut->fuOptions, pExtTextOut->rectangle.left, pExtTextOut->rectangle.top, pExtTextOut->rectangle.right, pExtTextOut->rectangle.bottom)); TRACE_OUT(( "Font: fx %u fy %u fw %u ff %04x fh %u len %u", pExtTextOut->common.FontWidth, pExtTextOut->common.FontHeight, pExtTextOut->common.FontWeight, pExtTextOut->common.FontFlags, pExtTextOut->common.FontIndex, ansiLen)); TRACE_OUT(( "String '%s'", ansiString)); break; default: ERROR_OUT(( "Unknown order %x", orderType)); break; } DC_EXIT_POINT: // // If we did not send an order, we must accumulate the output in the // Screen Data Area. // if (fSendOrder) { // // Store the general order data. The bounding rectangle position // must be in virtual desktop co-ordinates. OELRtoVirtual has // already done this. // pOrder->OrderHeader.Common.fOrderFlags = OF_SPOILABLE; TSHR_RECT16_FROM_RECT(&pOrder->OrderHeader.Common.rcsDst, rectDst); // // Add the order to the cache. // OEClipAndAddOrder(pOrder, NULL, pco); } else { if (fAccumulate) { OEClipAndAddScreenData(&rectDst, pco); } } OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitDWORD(DrvTextOut, rc); return(rc); } // // DrvLineTo - see NT DDK documentation. // BOOL DrvLineTo(SURFOBJ *pso, CLIPOBJ *pco, BRUSHOBJ *pbo, LONG x1, LONG y1, LONG x2, LONG y2, RECTL *prclBounds, MIX mix) { LPOSI_PDEV ppdev = (LPOSI_PDEV)pso->dhpdev; BOOL rc = TRUE; RECT rectDst; POINT startPoint; POINT endPoint; BOOL fAccumulate = FALSE; DebugEntry(DrvLineTo); // // DO THIS _BEFORE_ TAKING LOCK // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get bounding rectangle and convert to a RECT. // RECT_FROM_RECTL(rectDst, (*prclBounds)); // // Check if we are accumulating data for this function // fAccumulate = OEAccumulateOutput(pso, pco, &rectDst); if (!fAccumulate) { DC_QUIT; } // // Convert the data to virtual coordinates. // OELRtoVirtual(&rectDst, 1); // // Check if we are allowed to send this order (determined by the // negotiated capabilities of all the machines in the conference). // if (!OE_SendAsOrder(ORD_LINETO)) { TRACE_OUT(( "LineTo order not allowed")); DC_QUIT; } // // Check for a valid brush for the test operation. // if (pbo->iSolidColor == -1) { TRACE_OUT(( "Bad brush for line")); DC_QUIT; } // // Check for overcomplicated clipping. // if (OEClippingIsComplex(pco)) { TRACE_OUT(( "Clipping is too complex")); DC_QUIT; } // // Set up data for order // startPoint.x = x1; startPoint.y = y1; endPoint.x = x2; endPoint.y = y2; // // Store that order. // if (!OEAddLine(ppdev, &startPoint, &endPoint, &rectDst, mix & 0x1F, 1, pbo->iSolidColor, pco)) { TRACE_OUT(( "Failed to add order - use SDA")); DC_QUIT; } // // We have stored this object, so don't store the data in the SDA // again. // fAccumulate = FALSE; DC_EXIT_POINT: if (fAccumulate) { OEClipAndAddScreenData(&rectDst, pco); } OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitDWORD(DrvLineTo, rc); return(rc); } // // DrvStrokePath - see NT DDK documentation. // BOOL DrvStrokePath(SURFOBJ *pso, PATHOBJ *ppo, CLIPOBJ *pco, XFORMOBJ *pxo, BRUSHOBJ *pbo, POINTL *pptlBrushOrg, LINEATTRS *plineattrs, MIX mix) { LPOSI_PDEV ppdev = (LPOSI_PDEV)pso->dhpdev; BOOL rc = TRUE; RECTFX rectfxTrg; RECT rectDst; BOOL fMore = TRUE; PATHDATA pathData; POINT startPoint; POINT nextPoint; POINT endPoint; BOOL fAccumulate = FALSE; UINT i; DebugEntry(DrvStrokePath); // // DO THIS _BEFORE_ TAKING LOCK // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get bounding rectangle and convert to a RECT. // PATHOBJ_vGetBounds(ppo, &rectfxTrg); RECT_FROM_RECTFX(rectDst, rectfxTrg); // // Check if we are accumulating data for this function // fAccumulate = OEAccumulateOutput(pso, pco, &rectDst); if (!fAccumulate) { DC_QUIT; } // // Check if we are allowed to send this order (determined by the // negotiated capabilities of all the machines in the conference). // if (!OE_SendAsOrder(ORD_LINETO)) { TRACE_OUT(( "LineTo order not allowed")); DC_QUIT; } // // Check for a valid brush for the test operation. // if (pbo->iSolidColor == -1) { TRACE_OUT(( "Bad brush for line")); DC_QUIT; } // // Check for overcomplicated clipping. // if (OEClippingIsComplex(pco)) { TRACE_OUT(( "Clipping is too complex")); DC_QUIT; } // // See if we can optimize the path... // // We cannot send: // // - curvy lines (i.e. beziers) // - lines with funny end patterns (i.e. geometric lines) // - non Windows standard patterns // if ( ((ppo->fl & PO_BEZIERS) == 0) && ((plineattrs->fl & LA_GEOMETRIC) == 0) && (plineattrs->pstyle == NULL) ) { // // This is a set of solid cosmetic (i.e. no fancy end styles) // lines. Let's send those orders. // // NT stores all paths as a set of independent sub-paths. Each // sub-path can start at a new point that is NOT linked to the // previous sub-path. // // Paths used for this function (as opposed to DrvFillPath or // DrvStrokeAndFillPath) do not need to be closed. // PATHOBJ_vEnumStart(ppo); while (fMore) { // // Get the next set of lines // fMore = PATHOBJ_bEnum(ppo, &pathData); TRACE_OUT(( "PTS: %lu FLAG: %08lx", pathData.count, pathData.flags)); // // If this is the start of a path, remember the point in case // we need to close the path at the end. // if (pathData.flags & PD_BEGINSUBPATH) { POINT_FROM_POINTFIX(startPoint, pathData.pptfx[0]); POINT_FROM_POINTFIX(nextPoint, pathData.pptfx[0]); } // // Generate orders for each line in the path. // for (i = 0; i < pathData.count; i++) { POINT_FROM_POINTFIX(endPoint, pathData.pptfx[i]); if ( (nextPoint.x != endPoint.x) || (nextPoint.y != endPoint.y) ) { if (!OEAddLine(ppdev, &nextPoint, &endPoint, &rectDst, mix & 0x1f, plineattrs->elWidth.l, pbo->iSolidColor, pco)) { DC_QUIT; } } nextPoint.x = endPoint.x; nextPoint.y = endPoint.y; } // // Close the path if necessary. // if ((pathData.flags & PD_CLOSEFIGURE) != 0) { if (!OEAddLine(ppdev, &endPoint, &startPoint, &rectDst, mix & 0x1f, plineattrs->elWidth.l, pbo->iSolidColor, pco)) { DC_QUIT; } } } // // We have processed the entire thing as orders - don't send screen // data. // fAccumulate = FALSE; } DC_EXIT_POINT: if (fAccumulate) { // // Convert the bounds to virtual coordinates. // OELRtoVirtual(&rectDst, 1); TRACE_OUT(( "SDA: (%d,%d)(%d,%d)", rectDst.left, rectDst.top, rectDst.right, rectDst.bottom)); // // Update the Screen Data Area // OEClipAndAddScreenData(&rectDst, pco); } OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitDWORD(DrvStrokePath, rc); return(rc); } // // DrvFillPath - see NT DDK documentation. // BOOL DrvFillPath(SURFOBJ *pso, PATHOBJ *ppo, CLIPOBJ *pco, BRUSHOBJ *pbo, POINTL *pptlBrushOrg, MIX mix, FLONG flOptions) { BOOL rc = TRUE; RECTFX rectfxTrg; RECT rectDst; DebugEntry(DrvFillPath); // // DO THIS _BEFORE_ TAKING LOCK // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get bounding rectangle and convert to a RECT. // PATHOBJ_vGetBounds(ppo, &rectfxTrg); RECT_FROM_RECTFX(rectDst, rectfxTrg); // // Check if we are accumulating data for this function // if (!OEAccumulateOutput(pso, pco, &rectDst)) { DC_QUIT; } // // Convert the bounds to virtual coordinates. // OELRtoVirtual(&rectDst, 1); TRACE_OUT(( "SDA: (%d,%d)(%d,%d)", rectDst.left, rectDst.top, rectDst.right, rectDst.bottom)); // // Update the Screen Data Area // OEClipAndAddScreenData(&rectDst, pco); DC_EXIT_POINT: OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitDWORD(DrvFillPath, rc); return(rc); } // // DrvStrokeAndFillPath - see NT DDK documentation. // BOOL DrvStrokeAndFillPath(SURFOBJ *pso, PATHOBJ *ppo, CLIPOBJ *pco, XFORMOBJ *pxo, BRUSHOBJ *pboStroke, LINEATTRS *plineattrs, BRUSHOBJ *pboFill, POINTL *pptlBrushOrg, MIX mixFill, FLONG flOptions) { BOOL rc = TRUE; RECTFX rectfxTrg; RECT rectDst; DebugEntry(DrvStrokeAndFillPath); // // DO THIS _BEFORE_ TAKING LOCK // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get bounding rectangle and convert to a RECT. // PATHOBJ_vGetBounds(ppo, &rectfxTrg); RECT_FROM_RECTFX(rectDst, rectfxTrg); // // Check if we are accumulating data for this function // if (!OEAccumulateOutput(pso, pco, &rectDst)) { DC_QUIT; } // // Convert the bounds to virtual coordinates. // OELRtoVirtual(&rectDst, 1); // // Update the Screen Data Area // OEClipAndAddScreenData(&rectDst, pco); DC_EXIT_POINT: OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitDWORD(DrvStrokeAndFillPath, rc); return(rc); } // // DrvPaint - see NT DDK documentation. // BOOL DrvPaint(SURFOBJ *pso, CLIPOBJ *pco, BRUSHOBJ *pbo, POINTL *pptlBrushOrg, MIX mix) { BOOL rc = TRUE; RECT rectDst; BOOL fAccumulate = FALSE; ROP4 rop4; DebugEntry(DrvPaint); // // DO THIS _BEFORE_ TAKING LOCK // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get bounding rectangle and convert to a RECT. // RECT_FROM_RECTL(rectDst, pco->rclBounds); // // Check if we are accumulating data for this function // fAccumulate = OEAccumulateOutput(pso, pco, &rectDst); if (!fAccumulate) { DC_QUIT; } // // Convert to virtual coordinates. // OELRtoVirtual(&rectDst, 1); // // Check for overcomplicated clipping. // if (OEClippingIsComplex(pco)) { TRACE_OUT(( "Clipping is too complex")); DC_QUIT; } // // The low byte of the mix represents a ROP2. We need a ROP4 for // BitBlt, so convert the mix as follows. // // Remember the definitions of 2, 3 & 4 way ROP codes. // // Msk Pat Src Dst // // 1 1 1 1 ÍÍÍÍÍÍÍ͸ÍÍÍÍÍÍ» ROP2 uses P & D only // 1 1 1 0 ³ º // 1 1 0 1 Ä¿ ³ º ROP3 uses P, S & D // 1 1 0 0 ³ROP2-1³ROP3 ºROP4 // 1 0 1 1 ³(see ³ º ROP4 uses M, P, S & D // 1 0 1 0 ÄÙ note)³ º // 1 0 0 1 ³ º // 1 0 0 0 ÍÍÍÍÍÍÍ; º // 0 1 1 1 º // 0 1 1 0 º NOTE: Windows defines its // 0 1 0 1 º ROP2 codes as the bitwise // 0 1 0 0 º value calculated here // 0 0 1 1 º plus one. All other ROP // 0 0 1 0 º codes are the straight // 0 0 0 1 º bitwise value. // 0 0 0 0 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ // // Or, algorithmically... // // ROP3 = (ROP2 & 0x3) | ((ROP2 & 0xC) << 4) | (ROP2 << 2) // // ROP4 = (ROP3 << 8) | ROP3 // mix = (mix & 0x1F) - 1; rop4 = (mix & 0x3) | ((mix & 0xC) << 4) | (mix << 2); rop4 = (rop4 << 8) | rop4; // // This can be passed on to the BitBlt code. // rc = DrvBitBlt( pso, NULL, NULL, pco, NULL, &pco->rclBounds, NULL, NULL, pbo, pptlBrushOrg, rop4 ); // // We have stored this object in the BitBlt, so don't store the data // again. // fAccumulate = FALSE; DC_EXIT_POINT: if (fAccumulate) { OEClipAndAddScreenData(&rectDst, pco); } OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitDWORD(DrvPaint, rc); return(rc); } // // OE_DDProcessRequest - see oe.h // ULONG OE_DDProcessRequest ( SURFOBJ* pso, UINT cjIn, void * pvIn, UINT cjOut, void * pvOut ) { BOOL rc = TRUE; LPOSI_ESCAPE_HEADER pHeader; DebugEntry(OE_DDProcessRequest); // // Get the request number. // pHeader = pvIn; switch (pHeader->escapeFn) { case OE_ESC_NEW_FONTS: { if ((cjIn != sizeof(OE_NEW_FONTS)) || (cjOut != sizeof(OE_NEW_FONTS))) { ERROR_OUT(("OE_DDProcessRequest: Invalid sizes %d, %d for OE_ESC_NEW_FONTS", cjIn, cjOut)); rc = FALSE; DC_QUIT; } // // Get new local font data // OEDDSetNewFonts(pvIn); } break; case OE_ESC_NEW_CAPABILITIES: { if ((cjIn != sizeof(OE_NEW_CAPABILITIES)) || (cjOut != sizeof(OE_NEW_CAPABILITIES))) { ERROR_OUT(("OE_DDProcessRequest: Invalid sizes %d, %d for OE_ESC_NEW_CAPABILITIES", cjIn, cjOut)); rc = FALSE; DC_QUIT; } // // The capabilities have changed - take the new copy. // OEDDSetNewCapabilities(pvIn); } break; default: { ERROR_OUT(("Unrecognised OE escape")); rc = FALSE; } break; } DC_EXIT_POINT: DebugExitDWORD(OE_DDProcessRequest, rc); return((ULONG)rc); } // // OE_DDTerm() // This cleans up objects used // void OE_DDTerm(void) { DebugEntry(OE_DDTerm); // // Free font list // if (g_poeLocalFonts) { TRACE_OUT(("OE_DDLocalHosting: freeing font block since we're done sharing")); EngFreeMem(g_poeLocalFonts); g_poeLocalFonts = NULL; g_oeNumFonts = 0; } DebugExitVOID(OE_DDTerm); } // // DrvRealizeBrush - see NT DDK documentation. // BOOL DrvRealizeBrush(BRUSHOBJ *pbo, SURFOBJ *psoTarget, SURFOBJ *psoPattern, SURFOBJ *psoMask, XLATEOBJ *pxlo, ULONG iHatch) { LPOSI_PDEV ppdev = (LPOSI_PDEV)psoTarget->dhpdev; BOOL rc = TRUE; LPBYTE pData; BYTE brushBits[8]; UINT color1; UINT color2; int i; int j; BOOL monochromeBrush = TRUE; DebugEntry(DrvRealizeBrush); // // This function only sets up local data, so shared memory protection // is not required. // // // Since this function is called only when we call BRUSHOBJ_pvGetRBrush // and we don't do any processing until we are in a share we don't need // an explicit check for hosting here ('coz that happened before the // call to realise the brush). // // // A valid brush satisfies either of the following criteria. // // 1) It is a standard hatch brush (as passed by DrvEnablePDEV) // 2) It is an 8x8 monochrome bitmap // // // Check for a Windows standard hatch // if (iHatch < HS_DDI_MAX) { TRACE_OUT(( "Standard hatch %lu", iHatch)); rc = OEStoreBrush(ppdev, pbo, BS_HATCHED, NULL, pxlo, (BYTE)iHatch, 0, 1); DC_QUIT; } // // If the driver has been passed a dither color brush we can support // this by sending a solid color brush definition // if ((iHatch & RB_DITHERCOLOR) != 0) { TRACE_OUT(( "Standard hatch %lu", iHatch)); rc = OEStoreBrush(ppdev, pbo, BS_SOLID, NULL, NULL, (BYTE)iHatch, iHatch & 0xFFFFFF, 0); DC_QUIT; } // // Check for a simple 8x8 brush // if ( (psoPattern->sizlBitmap.cx == 8) && (psoPattern->sizlBitmap.cy == 8) ) { // // Check for 2 colours only in the bitmap. // // NOTE: There's a flag (BMF_TOPDOWN) in psoPattern->fjBitmap // that's supposed to indicate whether the bitmap is top-down or // bottom-up, but it is not always set up correctly. In fact, the // bitmaps are always the wrong way up for our protocol, so we have // to flip them regardless of the flag. Hence the row numbers are // reversed ('i' loops) in all the conversions below. // pData = psoPattern->pvScan0; switch (psoPattern->iBitmapFormat) { case BMF_1BPP: { // // 1 bpp MUST be 2 colours maximum. // color1 = 1; color2 = 0; for (i = 7; i >= 0; i--) { brushBits[i] = *pData; pData += psoPattern->lDelta; } } break; case BMF_4BPP: { // // See if it is really a 2 colour brush. Start off with // both colours the same. // color1 = pData[0] & 15; color2 = color1; // // Iterate through each row of the bitmap. // for (i = 7; (i >= 0) && (monochromeBrush); i--) { brushBits[i] = 0; // // Check each pixel in the row: 4bpp->2 pixels per byte // for (j = 0; (j < 4) && (monochromeBrush); j++) { // // Check the 1st pixel color // if ( (color1 != (UINT)(pData[j] & 0x0F)) && (color2 != (UINT)(pData[j] & 0x0F)) ) { if (color1 == color2) { color2 = (pData[j] & 0x0F); } else { monochromeBrush = FALSE; } } // // Check the 2nd pixel color // if ( (color1 != (UINT)((pData[j] & 0xF0) >> 4)) && (color2 != (UINT)((pData[j] & 0xF0) >> 4)) ) { if (color1 == color2) { color2 = (pData[j] & 0xF0) >> 4; } else { monochromeBrush = FALSE; } } // // Set up the brush data. High bit is leftmost. // if ((UINT)(pData[j] & 0x0F) == color1) { brushBits[i] |= 0x40 >> (j * 2); } if ((UINT)(pData[j] & 0xF0) >> 4 == color1) { brushBits[i] |= 0x80 >> (j * 2); } } // // Get start of next row. // pData += psoPattern->lDelta; } } break; case BMF_8BPP: { // // See if it is really a 2 colour brush. Start off with // both colours the same. // color1 = pData[0]; color2 = color1; // // Iterate through each row of the bitmap. // for (i = 7; (i >= 0) && (monochromeBrush); i--) { brushBits[i] = 0; // // Check each pixel in the row: 8bpp->1 pixel per byte // for (j = 0; (j < 8) && (monochromeBrush); j++) { // // Check each pixel. // if ( (color1 != pData[j]) && (color2 != pData[j]) ) { if (color1 == color2) { color2 = pData[j]; } else { monochromeBrush = FALSE; } } // // Update the brush data. High bit is leftmost. // if (pData[j] == color1) { brushBits[i] |= 0x80 >> j; } } // // Get start of next row. // pData += psoPattern->lDelta; } } break; default: { // // Unsupported colour depth. // monochromeBrush = FALSE; } break; } } else { // // The brush is the wrong size or requires dithering and so cannot // be sent over the wire. // monochromeBrush = FALSE; } // // Store that brush. // if (monochromeBrush) { // // Store the brush - note that we have a monochrome brush where the // color bit is set up so that 0 = color2 and 1 = color1. This // actually corresponds to 0 = fg and 1 = bg for the protocol // colors. // TRACE_OUT(( "Storing brush: type %d bg %x fg %x", psoPattern->iBitmapFormat, color1, color2)); rc = OEStoreBrush(ppdev, pbo, BS_PATTERN, brushBits, pxlo, 0, color2, color1); } else { TRACE_OUT(( "Rejected brush h %08lx s (%ld, %ld) fmt %lu", iHatch, psoPattern != NULL ? psoPattern->sizlBitmap.cx : 0, psoPattern != NULL ? psoPattern->sizlBitmap.cy : 0, psoPattern != NULL ? psoPattern->iBitmapFormat : 0)); rc = OEStoreBrush(ppdev, pbo, BS_NULL, NULL, pxlo, 0, 0, 0); } DC_EXIT_POINT: DebugExitDWORD(DrvRealizeBrush, rc); return(rc); } // // DrvSaveScreenBits - see NT DDK documentation. // ULONG_PTR DrvSaveScreenBits(SURFOBJ *pso, ULONG iMode, ULONG_PTR ident, RECTL *prcl) { BOOL rc; UINT ourMode; RECT rectDst; DebugEntry(DrvSaveScreenBits); TRACE_OUT(("DrvSaveScreenBits: %s", ((iMode == SS_SAVE) ? "SAVE" : ((iMode == SS_RESTORE) ? "RESTORE" : "DISCARD")))); TRACE_OUT((" rect {%04ld, %04ld, %04ld, %04ld}", prcl->left, prcl->top, prcl->right, prcl->bottom)); // // Default is TRUE, let SaveBits happen if we don't care. Which we don't // if we have no shared memory (NetMeeting isn't running), no window list // (no shared apps), or the operation isn't intersecting a window we // care about. // // Note that if we return TRUE on a save, and FALSE on a restore later // (because we are now sharing that area for example), USER+GRE handle // that. So it's ok. // rc = TRUE; // // DO THIS _BEFORE_ TAKING LOCK // if (!g_oeViewers) goto NO_LOCK_EXIT; // // If we have no shared memory (NetMeeting isn't running), this will bail // out immediately. // OE_SHM_START_WRITING; // // Get the bounding rectangle for the operation. NOTE that this is // meaningless for SS_FREE. // RECT_FROM_RECTL(rectDst, (*prcl)); if (iMode != SS_FREE) { // // Check if we are accumulating data for this area, ONLY FOR // SAVEs. We may get notified after a window is gone to // restore or discard bits we had saved. // if (!OEAccumulateOutputRect(pso, &rectDst)) { TRACE_OUT(("DrvSaveScreenBits: save/restore in area we don't care about")); DC_QUIT; } } // // Convert the NT orders to our generic save/restore types. // switch (iMode) { case SS_SAVE: { ourMode = ONBOARD_SAVE; } break; case SS_RESTORE: { ourMode = ONBOARD_RESTORE; } break; case SS_FREE: { ourMode = ONBOARD_DISCARD; } break; default: { ERROR_OUT(( "Unknown type %lu", iMode)); DC_QUIT; } } // // Call through to the SSI handler. // rc = SSI_SaveScreenBitmap(&rectDst, ourMode); DC_EXIT_POINT: OE_SHM_STOP_WRITING; NO_LOCK_EXIT: TRACE_OUT(("DrvSaveScreenBits returning %d", rc)); DebugExitDWORD(DrvSaveScreenBits, rc); return(rc); } // // Function: OEUnicodeStrlen // // Description: Get the length of a unicode string in bytes. // // Parameters: pString - Unicode string to be read // // Returns: Length of the Unicode string in bytes // int OEUnicodeStrlen(PWSTR pString) { int i; for (i = 0; pString[i] != 0; i++) ; return((i + 1) * sizeof(WCHAR)); } // // Function: OEExpandColor // // Description: Converts a generic bitwise representation of an RGB color // index into an 8-bit color index as used by the line // protocol. // // void OEExpandColor ( LPBYTE lpField, ULONG srcColor, ULONG mask ) { ULONG colorTmp; DebugEntry(OEExpandColor); // // Different example bit masks: // // Normal 24-bit: // 0x000000FF (red) // 0x0000FF00 (green) // 0x00FF0000 (blue) // // True color 32-bits: // 0xFF000000 (red) // 0x00FF0000 (green) // 0x0000FF00 (blue) // // 5-5-5 16-bits // 0x0000001F (red) // 0x000003E0 (green) // 0x00007C00 (blue) // // 5-6-5 16-bits // 0x0000001F (red) // 0x000007E0 (green) // 0x0000F800 (blue) // // // Convert the color using the following algorithm. // // = * / // // where: // // new bpp mask = mask for all bits at new setting (0xFF for 8bpp) // // This way maximal (eg. 0x1F) and minimal (eg. 0x00) settings are // converted into the correct 8-bit maximum and minimum. // // Rearranging the above equation we get: // // = ( & ) * 0xFF / // // where: // // = mask for the color // // // LAURABU BOGUS: // We need to avoid overflow caused by the multiply. NOTE: in theory // we should use a double, but that's painfully slow. So for now hack // it. If the HIBYTE is set, just right shift 24 bits. // colorTmp = srcColor & mask; if (colorTmp & 0xFF000000) colorTmp >>= 24; else colorTmp = (colorTmp * 0xFF) / mask; *lpField = (BYTE)colorTmp; TRACE_OUT(( "0x%lX -> 0x%X", srcColor, *lpField)); DebugExitVOID(OEExpandColor); } // // Function: OEConvertColor // // Description: Convert a color from the NT Display Driver into a TSHR_COLOR // // Parameters: pDCColor - (returned) color in protocol format // osColor - color from the NT display driver // pxlo - XLATEOBJ for the color to be converted // (NULL if no translation is required) // // Returns: (none) // void OEConvertColor(LPOSI_PDEV ppdev, LPTSHR_COLOR pTshrColor, ULONG osColor, XLATEOBJ* pxlo) { ULONG realIndex; DebugEntry(OEConvertColor); // // Make sure we have a default setting. // RtlFillMemory(pTshrColor, sizeof(TSHR_COLOR), 0); // // Check if color translation is required. // if ((pxlo != NULL) && (pxlo->flXlate != XO_TRIVIAL)) { // // Convert from BMP to device color. // realIndex = XLATEOBJ_iXlate(pxlo, osColor); if (realIndex == -1) { ERROR_OUT(( "Failed to convert color 0x%lx", osColor)); DC_QUIT; } } else { // // Use the OS color without translation // realIndex = osColor; } TRACE_OUT(( "Device color 0x%lX", realIndex)); // // We now have the device specific version of the color. Time to // convert it into a 24-bit RGB color as used by the line protocol. // switch (ppdev->iBitmapFormat) { case BMF_1BPP: case BMF_4BPP: case BMF_4RLE: case BMF_8BPP: case BMF_8RLE: // // Palette type device - use the device color as an index into // our palette array. // pTshrColor->red = (BYTE)ppdev->pPal[realIndex].peRed; pTshrColor->green= (BYTE)ppdev->pPal[realIndex].peGreen; pTshrColor->blue = (BYTE)ppdev->pPal[realIndex].peBlue; break; case BMF_16BPP: case BMF_24BPP: case BMF_32BPP: // // Generic colour masks (could be eg. 5-6-5 for 16 or 8-8-8 // for 24 bits per pel). We must mask off the other bits and // shift down to bit 0. // OEExpandColor(&(pTshrColor->red), realIndex, ppdev->flRed); OEExpandColor(&(pTshrColor->green), realIndex, ppdev->flGreen); OEExpandColor(&(pTshrColor->blue), realIndex, ppdev->flBlue); break; default: ERROR_OUT(( "Unrecognised BMP color depth %lu", ppdev->iBitmapFormat)); break; } TRACE_OUT(( "Red %x green %x blue %x", pTshrColor->red, pTshrColor->green, pTshrColor->blue)); DC_EXIT_POINT: DebugExitVOID(OEConvertColor); } // // Function: OEStoreBrush // // Description: Store the brush data required for pattern realted orders. // This function is called by DrvRealiseBrush when it has data // to be stored about a brush. // // Parameters: pbo - BRUSHOBJ of the brush to be stored // style - Style of the brush (as defined in the DC-Share // protocol) // pBits - Pointer to the bits which are used to define // a BS_PATTERN brush. // pxlo - XLATEOBJ for the brush. // hatch - Standard Windows hatch pattern index for a // BS_HATCHED brush. // color1 - index into XLATEOBJ for bit set color // OR exact 24bpp color to use (pxlo == NULL) // color2 - index into XLATEOBJ for bit clear color // OR exact 24bpp color to use (pxlo == NULL) // // Returns: (none) // BOOL OEStoreBrush(LPOSI_PDEV ppdev, BRUSHOBJ* pbo, BYTE style, LPBYTE pBits, XLATEOBJ* pxlo, BYTE hatch, UINT color1, UINT color2) { BOOL rc = FALSE; int i; LPBYTE pData; ULONG* pColorTable; POE_BRUSH_DATA pBrush; DebugEntry(OEStoreBrush); // // Allocate the space for the brush data. // pBrush = (POE_BRUSH_DATA)BRUSHOBJ_pvAllocRbrush(pbo, sizeof(OE_BRUSH_DATA)); if (pBrush == NULL) { ERROR_OUT(( "No memory")); DC_QUIT; } // // Reset the brush definition // RtlFillMemory(pBrush, sizeof(OE_BRUSH_DATA), 0); // // Set the new brush data. // pBrush->style = style; pBrush->hatch = hatch; TRACE_OUT(( " Style: %d Hatch: %d", style, hatch)); // // For pattern brushes, copy the brush specific data. // if (style == BS_PATTERN) { // // Copy the brush bits. Since this is an 8x8 mono bitmap, we can // copy the first byte of the brush data for each scan line. // // NOTE however that the brush structures sent over the wire // re-use the hatching variable as the first byte of the brush data. // pData = pBits; pBrush->hatch = *pData; TRACE_OUT(( " Hatch: %d", *pData)); pData++; for (i = 0; i < 7; i++) { pBrush->brushData[i] = pData[i]; TRACE_OUT(( " Data[%d]: %d", i, pData[i])); } // // Get pointer to the bitmap color table. // pColorTable = pxlo->pulXlate; if (pColorTable == NULL) { pColorTable = XLATEOBJ_piVector(pxlo); } } // // Store the foreground and background colours for the brush. // if (pxlo != NULL) { // // Conversion required. // OEConvertColor(ppdev, &pBrush->fore, color1, pxlo); OEConvertColor(ppdev, &pBrush->back, color2, pxlo); } else { // // We have been passed an exact 24bpp color - this only happens for // solid brushes so we don't need to convert color2. // pBrush->fore.red = (BYTE) (color1 & 0x0000FF); pBrush->fore.green = (BYTE)((color1 & 0x00FF00) >> 8); pBrush->fore.blue = (BYTE)((color1 & 0xFF0000) >> 16); } rc = TRUE; DC_EXIT_POINT: DebugExitDWORD(OEStoreBrush, rc); return(rc); } // // Function: OECheckBrushIsSimple // // Description: Check that the brush is a 'simple' object we can transfer // over the DC-Share protocol. // // Parameters: pbo - BRUSHOBJ of the brush to be checked. // // Returns: TRUE - brush can be sent as DC-Share order // FALSE - brush is too complicated. // BOOL OECheckBrushIsSimple(LPOSI_PDEV ppdev, BRUSHOBJ* pbo, POE_BRUSH_DATA* ppBrush) { BOOL rc = FALSE; POE_BRUSH_DATA pBrush = NULL; DebugEntry(OECheckBrushIsSimple); // // A 'simple' brush satisfies any of the following. // // 1) It is a solid color. // 2) It is a valid brush as stored by DrvRealizeBrush. // // // Check for a simple solid colour. // if (pbo->iSolidColor != -1) { // // Use the reserved brush definition to set up the solid colour. // TRACE_OUT(( "Simple solid colour %08lx", pbo->iSolidColor)); pBrush = &g_oeBrushData; // // Set up the specific data for this brush. // OEConvertColor(ppdev, &pBrush->fore, pbo->iSolidColor, NULL); pBrush->back.red = 0; pBrush->back.green = 0; pBrush->back.blue = 0; pBrush->style = BS_SOLID; pBrush->hatch = 0; RtlFillMemory(pBrush->brushData, 7, 0); // // We have a valid brush - return true. // rc = TRUE; DC_QUIT; } // // Check brush definition (which was stored when we realized the // brush). // pBrush = (POE_BRUSH_DATA)pbo->pvRbrush; if (pBrush == NULL) { pBrush = (POE_BRUSH_DATA)BRUSHOBJ_pvGetRbrush(pbo); if (pBrush == NULL) { // // We can get NULL returned from BRUSHOBJ_pvGetRbrush when the // brush is NULL or in low-memory situations (when the brush // realization may fail). // TRACE_OUT(( "NULL returned from BRUSHOBJ_pvGetRbrush")); DC_QUIT; } } // // Check it is an encodable brush. // if (pBrush->style == BS_NULL) { TRACE_OUT(( "Complex brush")); DC_QUIT; } // // Evrything passed - let's use this brush. // rc = TRUE; DC_EXIT_POINT: // // Return the brush definition // *ppBrush = pBrush; TRACE_OUT(( "Returning %d - 0x%08lx", rc, pBrush)); DebugExitDWORD(OECheckBrushIsSimple, rc); return(rc); } // // Function: OEClippingIsSimple // // Description: Check to see if the clipping on the graphics object is // trivial // // Parameters: pco - CLIPOBJ of the graphics object to be checked. // // Returns: TRUE - Clipping is trivial // FALSE - Clipping is complex // BOOL OEClippingIsSimple(CLIPOBJ* pco) { BOOL rc = TRUE; DebugEntry(OEClippingIsSimple); // // Check for a valid clip object // if (pco == NULL) { TRACE_OUT(( "No clipobj")); DC_QUIT; } // // Check for complexity of clipping // switch (pco->iDComplexity) { case DC_TRIVIAL: case DC_RECT: // // Trivial (ignore clipping) or simple (one square) clipping - // no worries. // TRACE_OUT(( "Simple clipping")); DC_QUIT; default: TRACE_OUT(( "Clipping is complex")); break; } // // Failed all tests - must be too complicated. // rc = FALSE; DC_EXIT_POINT: DebugExitDWORD(OEClippingIsSimple, rc); return(rc); } // // Function: OEClippingIsComplex // // Description: Check to see if the clipping on the graphics object is too // complicated to be sent as an order or multiple orders. // // Parameters: pco - CLIPOBJ of the graphics object to be checked. // // Returns: TRUE - Clipping is too complicated // FALSE - Clipping is sufficiently simple to send as orders // BOOL OEClippingIsComplex(CLIPOBJ* pco) { BOOL rc = FALSE; BOOL fMoreRects; OE_ENUMRECTS clip; UINT numRects = 0; DebugEntry(OEClippingIsComplex); // // If the any of the following are true, the clipping is not too // complicated. // // 1) The clip object does not exist. // 2) The clipping is trivial (the object exists, but there are no // clipping rectangles). // 3) The clipping is a single rectangle. // 4) The object enumerates to less than 'n' rectangles. // // // Check for a valid clip object // if (pco == NULL) { TRACE_OUT(( "No clipobj")); DC_QUIT; } // // Check for complexity of clipping // switch (pco->iDComplexity) { case DC_TRIVIAL: case DC_RECT: // // Trivial or simple clipping - no worries. // TRACE_OUT(( "Simple clipping")); DC_QUIT; case DC_COMPLEX: // // Lots of rectangles - make sure that it is less than the // acceptable limit. // The documentation for this function incorrectly states that // the returned value is the total number of rectangles // comprising the clip region. In fact, -1 is always returned, // even when the final parameter is non-zero. This means we // have to enumerate to get the number of rects. // CLIPOBJ_cEnumStart(pco, FALSE, CT_RECTANGLES, CD_ANY, 0); // // MSDN: It is possible for CLIPOBJ_bEnum to return TRUE with // the number of clipping rectangles equal to zero. In such // cases, the driver should call CLIPOBJ_bEnum again without // taking any action. Get as many rectangles as we permit for // order encoding - this loop should execute once only. // If the number of rects equals COMPLEX_CLIP_RECT_COUNT the // 1st invocation of CLIPOBJ_bEnum returns that there are more // rects and a second call returns there are no more without // returning any in addition to those returned on the first // call. Our buffer has space for COMPLEX_CLIP_RECT_COUNT+1 // rects so we should never have to execute the loop more than // once. // do { fMoreRects = CLIPOBJ_bEnum(pco, sizeof(clip), (ULONG *)&clip.rects); numRects += clip.rects.c; } while ( fMoreRects && (numRects <= COMPLEX_CLIP_RECT_COUNT) ); // // If there are no more rectangles in the clip region then the // clipping complexity is within our limits for order encoding. // if ( numRects <= COMPLEX_CLIP_RECT_COUNT ) { TRACE_OUT(( "Acceptable clipping %u", numRects)); DC_QUIT; } break; default: ERROR_OUT(( "Unknown clipping")); break; } // // Failed all tests - must be too complicated. // TRACE_OUT(( "Complex clipping")); rc = TRUE; DC_EXIT_POINT: DebugExitDWORD(OEClippingIsComplex, rc); return(rc); } // // Function: OEAccumulateOutput // // Description: Check to see if we should accumulate this output for // sending to the remote machine. // // Parameters: pso - Pointer to the target surface // pco - Pointer to the clip object (may be NULL) // pRect - Pointer to the bounding rectangle of the operation // // Returns: TRUE - We should accumulate the output // FALSE - ignore the output // BOOL OEAccumulateOutput(SURFOBJ* pso, CLIPOBJ *pco, LPRECT pRect) { BOOL rc = FALSE; POINT pt = {0,0}; ENUMRECTS clipRect; LPOSI_PDEV ppdev = ((LPOSI_PDEV)pso->dhpdev); DebugEntry(OEAccumulateOutput); // // Validate we have valid parameters to access the surface. // if (ppdev == NULL) { TRACE_OUT(( "NULL PDEV")); DC_QUIT; } // // Check for the screen surface, which will be a bitmap in the hosting // only code. // if (ppdev->hsurfScreen != pso->hsurf) { TRACE_OUT(( "Dest is not our surface")); DC_QUIT; } if (pso->dhsurf == NULL) { ERROR_OUT(( "NULL hSurf")); DC_QUIT; } // // Extract a single point from the clip object // if (pco == NULL) { // // No clip object - use a point from the bounding rectangle // pt.x = pRect->left; pt.y = pRect->top; TRACE_OUT(( "No clip object, point is %d, %d", pt.x, pt.y)); } else if (pco->iDComplexity == DC_TRIVIAL) { // // Trivial clip object - use a point from the bounding rectangle // pt.x = pRect->left; pt.y = pRect->top; TRACE_OUT(( "Trivial clip object, point is %d, %d", pt.x, pt.y)); } else if (pco->iDComplexity == DC_RECT) { // // Single clip rectangle - use a point from it // // It appears that the clip rectangle is frequantly the entire // display. This is about as much use as a chocolate teapot. If // this is the case, use a point from the bounding rectangle // instead. // if ((pco->rclBounds.left == 0) && (pco->rclBounds.top == 0)) { pt.x = pRect->left; pt.y = pRect->top; TRACE_OUT(( "Meaningless clip rect, point is %d, %d", pt.x, pt.y)); } else { pt.x = pco->rclBounds.left; pt.y = pco->rclBounds.top; TRACE_OUT(( "Single clip rect, point is %d, %d", pt.x, pt.y)); } } else { // // Complex clip object - enumerate its first rectangle and use a // point from that. // TRACE_OUT(( "Complex clip rect - call cEnumStart")); CLIPOBJ_cEnumStart(pco, FALSE, CT_RECTANGLES, CD_ANY, 0); clipRect.c = 1; memset(clipRect.arcl, 0, sizeof(RECTL)); TRACE_OUT(( "Complex clip rect - call bEnum")); CLIPOBJ_bEnum(pco, sizeof(clipRect), (ULONG *)(&clipRect)); pt.x = clipRect.arcl[0].left; pt.y = clipRect.arcl[0].top; TRACE_OUT(( "Complex clip rect, point is %d, %d", pt.x, pt.y)); } // // Check if we are accumulating this window. // rc = HET_DDOutputIsHosted(pt); DC_EXIT_POINT: TRACE_OUT(("OEAccumulateOutput: point {%d, %d} is %sshared", pt.x, pt.y, (rc ? "" : "NOT "))); DebugExitBOOL(OEAccumulateOutput, rc); return(rc); } // // Function: OEAccumulateOutputRect // // Description: Check to see if we should accumulate the given output rect // for sending to the remote machine. // // Most drawing functions will use OEAccumulateOutput, which // just checks for a single point within the hosted area. // This function checks for any part of the given rectangle // intersecting with the hosted area. It is currently only // used by DrvSaveScreenBitmap - operations which may not // lie completetely within the hosted area. // // Parameters: pso - Pointer to the target surface // pRect - Pointer to the bounding rectangle of the operation // // Returns: TRUE - We should accumulate the output // FALSE - ignore the output // BOOL OEAccumulateOutputRect( SURFOBJ* pso, LPRECT pRect) { BOOL rc = FALSE; LPOSI_PDEV ppdev = ((LPOSI_PDEV)pso->dhpdev); DebugEntry(OEAccumulateOutputRect); // // Validate we have valid parameters to access the surface. // if (ppdev == NULL) { TRACE_OUT(( "NULL PDEV")); DC_QUIT; } // // Check for the screen surface, which will be a bitmap in the hosting // only code. // if (ppdev->hsurfScreen != pso->hsurf) { TRACE_OUT(( "Dest is not our surface")); DC_QUIT; } if (pso->dhsurf == NULL) { ERROR_OUT(( "NULL hSurf")); DC_QUIT; } // // Check if we are accumulating this window. // rc = HET_DDOutputRectIsHosted(pRect); DC_EXIT_POINT: TRACE_OUT(("OEAccumulateOutputRect: rect {%d, %d, %d, %d} is %sshared", pRect->left, pRect->top, pRect->right, pRect->bottom, (rc ? "" : "NOT "))); DebugExitBOOL(OEAccumulateOutputRect, rc); return(rc); } // // Function: OESendRop3AsOrder // // Description: Check if we are allowed to send this 3-way ROP. A ROP may // be disallowed if it relies on the destination data. // // Parameters: rop3 - the 3-way ROP to be checked. // // Returns: TRUE - We are allowed to send this ROP // FALSE - We can't send this ROP // BOOL OESendRop3AsOrder(BYTE rop3) { BOOL rc = TRUE; DebugEntry(OESendRop3AsOrder); // // Rop 0x5F is used by MSDN to highlight search keywords. This XORs // a pattern with the destination, producing markedly different (and // sometimes unreadable) shadow output. We special-case no-encoding for // it. // if (rop3 == 0x5F) { TRACE_OUT(("Rop3 0x5F never encoded")); rc = FALSE; } DebugExitBOOL(OESendRop3AsOrder, rc); return(rc); } // // Function: OECheckFontIsSupported // // Description: Check if we are allowed to send this font. Fonts are // disallowed while they are being negotiated on a new entry // to the share. // // Parameters: pfo - (IN) the font to be checked // pFontText - (IN) text message to be sent // textLen - (IN) length of text message // pFontHeight - (OUT) font height in points // pFontAscender - (OUT) font ascender in points // pFontWidth - (OUT) ave font width in points // pFontWeight - (OUT) font weight // pFontFlags - (OUT) font style flags // pFontIndex - (OUT) font table index // pSendDeltaX - (OUT) Do we need to send delta X coords? // // Returns: TRUE - We are allowed to send this font // FALSE - We can't send this font // BOOL OECheckFontIsSupported ( FONTOBJ* pfo, LPSTR pFontText, UINT textLen, LPUINT pFontHeight, LPUINT pFontAscender, LPUINT pFontWidth, LPUINT pFontWeight, LPUINT pFontFlags, LPUINT pFontIndex, LPBOOL pSendDeltaX ) { BOOL rc = FALSE; PIFIMETRICS pFontMetrics; UINT codePage; UINT i; UINT iLocal; UINT matchQuality; UINT charWidthAdjustment = 0; char fontName[FH_FACESIZE]; ULONG fontNameLen; PWSTR pUnicodeString; XFORMOBJ* pxform; POINTL xformSize[3]; int compareResult; FLOATOBJ_XFORM xformFloatData; DebugEntry(OECheckFontIsSupported); // // Set up default return values // *pSendDeltaX = FALSE; // // Check that we have a valid list of font data from the remotes. // if (!g_oeTextEnabled) { TRACE_OUT(( "Fonts unavailable")); DC_QUIT; } // // Check for valid font attributes // pFontMetrics = FONTOBJ_pifi(pfo); if (pFontMetrics->fsSelection & FM_SEL_OUTLINED) { TRACE_OUT(( "Unsupported font style")); DC_QUIT; } // // The current protocol cannot apply a general 2-D transform to text // orders, so we must reject any weird ones such as: // // - rotations // - X or Y shears // - X or Y reflections // - scaling with a negative value. // // Or put another way, we only allow: // // - the identity transformation // - scaling with a positive value. // pxform = FONTOBJ_pxoGetXform(pfo); if (pxform != NULL) { // // Get the details of the transformation. Note we can ignore the // translation vector as it does not affect the font sizing / // orientation, so we are only interested in the matrix values... // // // NOTE: Do NOT use floating point explicitly! // Can't do float ops in ring 0 with normal lib for x86. // Use FLOATOBJs instead and corresponding Eng services. // On alpha, these are macros and are way fast in any case. // if (XFORMOBJ_iGetFloatObjXform(pxform, &xformFloatData) != DDI_ERROR) { // // Rotations and shears will have cross dependencies on the x // and y components. // if ( (!FLOATOBJ_EqualLong(&xformFloatData.eM12, 0)) || (!FLOATOBJ_EqualLong(&xformFloatData.eM21, 0)) ) { TRACE_OUT(( "Rejected rotn/shear")); DC_QUIT; } // // Reflections and scaling operations with negative scale // factors will have negative values on the leading diagonal of // the matrix. // if ( (FLOATOBJ_LessThanLong(&xformFloatData.eM11, 0)) || (FLOATOBJ_LessThanLong(&xformFloatData.eM22, 0)) ) { TRACE_OUT(( "Rejected refln/-ive")); DC_QUIT; } } } // // Get the current font code page for font matching. // switch (pFontMetrics->jWinCharSet) { case ANSI_CHARSET: TRACE_OUT(( "ANSI font")); codePage = NF_CP_WIN_ANSI; break; case OEM_CHARSET: TRACE_OUT(( "OEM font")); codePage = NF_CP_WIN_OEM; break; case SYMBOL_CHARSET: TRACE_OUT(("Symbol font")); codePage = NF_CP_WIN_SYMBOL; break; default: TRACE_OUT(( "Unknown CP %d", pFontMetrics->jWinCharSet)); codePage = NF_CP_UNKNOWN; break; } // // Get the name of the font. // pUnicodeString = (PWSTR)( (LPBYTE)pFontMetrics + pFontMetrics->dpwszFamilyName ); EngUnicodeToMultiByteN(fontName, sizeof(fontName), &fontNameLen, pUnicodeString, OEUnicodeStrlen(pUnicodeString)); // // Search our Font Alias Table for the current family name. If we find // it, replace it with the alias name from the table. // for (i = 0; i < NUM_ALIAS_FONTS; i++) { if (!strcmp((LPSTR)fontName, (LPSTR)(fontAliasTable[i].pszOriginalFontName))) { TRACE_OUT(( "Alias name: %s -> %s", (LPSTR)fontName, (LPSTR)(fontAliasTable[i].pszAliasFontName))); strcpy((LPSTR)fontName, (LPSTR)(fontAliasTable[i].pszAliasFontName)); charWidthAdjustment = fontAliasTable[i].charWidthAdjustment; break; } } TRACE_OUT(( "Font name: '%s'", fontName)); // // We have a font name to match with those we know to be available // remotely. Try to jump straight to the first entry in the local font // table starting with the same character as this font. If this index // slot is empty (i.e. has a value of USHRT_MAX) then the loop will // immediately exit // TRACE_OUT(( "Looking for matching fonts")); for (iLocal = g_oeLocalFontIndex[(BYTE)fontName[0]]; iLocal < g_oeNumFonts; iLocal++) { TRACE_OUT(( "Trying font number %hd", iLocal)); // // If this font is not supported remotely then skip it. // ASSERT(g_poeLocalFonts); matchQuality = g_poeLocalFonts[iLocal].SupportCode; if (matchQuality == FH_SC_NO_MATCH) { continue; } // // See if we've got a facename match // compareResult = strcmp(g_poeLocalFonts[iLocal].Details.nfFaceName, fontName); if (compareResult < 0) { // // We haven't found a match yet, but we haven't gone far enough // into this list. // continue; } else if (compareResult > 0) { // // We're past the part of the local font array that's applicable. // We didn't find a match, it must not exist. // break; } // // The font names match. Now see if the other attributes do... // // // This is looking promising - a font with the right name is // supported on the remote system. // // Start building up the details in the global variables while // making further checks... // *pFontFlags = 0; *pFontIndex = iLocal; *pFontWeight = pFontMetrics->usWinWeight; // // Check for a fixed pitch font. // if ((pFontMetrics->jWinPitchAndFamily & FIXED_PITCH) != 0) { *pFontFlags |= NF_FIXED_PITCH; } // // Is it a TrueType font? // if ((pfo->flFontType & TRUETYPE_FONTTYPE) != 0) { *pFontFlags |= NF_TRUE_TYPE; } // // Get the basic width and height. // xformSize[0].y = 0; xformSize[0].x = 0; xformSize[1].y = pFontMetrics->fwdUnitsPerEm; xformSize[1].x = pFontMetrics->fwdAveCharWidth; xformSize[2].y = pFontMetrics->fwdWinAscender; xformSize[2].x = 0; // // We now need to convert these sizes if the GDI has provided a // transform object. // if (pxform != NULL) { if (!XFORMOBJ_bApplyXform(pxform, XF_LTOL, 3, &xformSize, &xformSize)) { ERROR_OUT(( "Xform failed")); continue; } } // // Calculate the font width and height. // *pFontHeight = (UINT)(xformSize[1].y - xformSize[0].y); *pFontWidth = (UINT)(xformSize[1].x - xformSize[0].x - charWidthAdjustment); TRACE_OUT(( "Device font size %hdx%hd", *pFontWidth, *pFontHeight)); // // Get the offset to the start of the text cell. // *pFontAscender = (UINT)(xformSize[2].y - xformSize[0].y); // // Check that we have a matching pair - where we require that the // fonts (ie the one being used by the application and the one // we've matched with the remote system) are the same pitch (ie // variable or fixed) and use the same technology (ie TrueType or // not). // if ((g_poeLocalFonts[iLocal].Details.nfFontFlags & NF_FIXED_PITCH) != ((TSHR_UINT16)(*pFontFlags) & NF_FIXED_PITCH)) { TRACE_OUT(( "Fixed pitch mismatch")); continue; } if ((g_poeLocalFonts[iLocal].Details.nfFontFlags & NF_TRUE_TYPE) != ((TSHR_UINT16)*pFontFlags & NF_TRUE_TYPE)) { TRACE_OUT(( "True type mismatch")); continue; } // // We have a pair of fonts with the same attributes - either both // fixed pitch or both variable pitch - and using the same font // technology. // // If the font is fixed pitch then we must also check that this // particular size matches. // // If the font is not fixed pitch (scalable) then we assume that it // is matchable. // if (g_poeLocalFonts[iLocal].Details.nfFontFlags & NF_FIXED_SIZE) { // // The font is fixed size, so we must check that this // particular size is matchable. // if ( (*pFontHeight != g_poeLocalFonts[iLocal].Details.nfAveHeight) || (*pFontWidth != g_poeLocalFonts[iLocal].Details.nfAveWidth) ) { // // The sizes differ, so we must fail this match. // TRACE_OUT(( "Size mismatch")); continue; } } // // Hey! We've got a matched pair! // rc = TRUE; TRACE_OUT(( "Found match at local font %hd", iLocal)); break; } if (rc != TRUE) { TRACE_OUT(( "Couldn't find matching font in table")); DC_QUIT; } // // Build up the rest of the font flags. We have already put the pitch // flag in place. // if ( ((pFontMetrics->fsSelection & FM_SEL_ITALIC) != 0) || ((pfo->flFontType & FO_SIM_ITALIC) != 0) ) { TRACE_OUT(( "Italic")); *pFontFlags |= NF_ITALIC; } if ((pFontMetrics->fsSelection & FM_SEL_UNDERSCORE) != 0) { TRACE_OUT(( "Underline")); *pFontFlags |= NF_UNDERLINE; } if ((pFontMetrics->fsSelection & FM_SEL_STRIKEOUT) != 0) { TRACE_OUT(( "Strikeout")); *pFontFlags |= NF_STRIKEOUT; } // // It is possible to have a font made bold by Windows, i.e. the // standard font definition is not bold, but windows manipulates the // font data to create a bold effect. This is marked by the // FO_SIM_BOLD flag. // // In this case we need to ensure that the font flags are marked as // bold according to the weight. // if ( ((pfo->flFontType & FO_SIM_BOLD) != 0) && ( pFontMetrics->usWinWeight < FW_BOLD) ) { TRACE_OUT(( "Upgrading weight for a bold font")); *pFontWeight = FW_BOLD; } // // If the font is an exact match, or if it is an approximate match for // its entire range (0x00 to 0xFF) then send it happily. If not...only // send chars within the range 0x20->0x7F ("true ASCII"). // ASSERT(g_poeLocalFonts); if (codePage != g_poeLocalFonts[iLocal].Details.nfCodePage) { TRACE_OUT(( "Using different CP: downgrade to APPROX_ASC")); matchQuality = FH_SC_APPROX_ASCII_MATCH; } // // If we don't have an exact match, check the individual characters. // if ( (matchQuality != FH_SC_EXACT_MATCH ) && (matchQuality != FH_SC_APPROX_MATCH) ) { // // The approximate match is only valid if we use a font that // supports the ANSI character set. // if ((pFontMetrics->jWinCharSet & ANSI_CHARSET) != 0) { TRACE_OUT(( "Cannot do match without ANSI support")); DC_QUIT; } // // This font is not a good match across its entire range. Check // that all chars are within the desired range. // for (i = 0; i < textLen; i++) { if ( (pFontText[i] == 0) || ( (pFontText[i] >= NF_ASCII_FIRST) && (pFontText[i] <= NF_ASCII_LAST) ) ) { continue; } // // Can only get here by finding a char outside our acceptable // range. // TRACE_OUT(( "found non ASCII char %x", pFontText[i])); DC_QUIT; } } // // We have a valid font. Now sort out delta X issues. // // // If we do not need to send delta X arrays then exit now. // if (!(g_oeFontCaps & CAPS_FONT_NEED_X_ALWAYS)) { if (!(g_oeFontCaps & CAPS_FONT_NEED_X_SOMETIMES)) { // // CAPS_FONT_NEED_X_SOMETIMES and CAPS_FONT_NEED_X_ALWAYS are // both not set so we can exit now. (We do not need a delta X // array). // TRACE_OUT(( "Capabilities eliminated delta X")); DC_QUIT; } // // CAPS_FONT_NEED_X_SOMETIMES is set and CAPS_FONT_NEED_X_ALWAYS is // not set. In this case whether we need a delta X is determined // by whether the font is an exact match or an approximate match // (because of either approximation of name, signature, or aspect // ratio). We can only find this out after we have extracted the // font handle from the existing order. // } // // If the string is a single character (or less) then we can just // return. // if (textLen <= 1) { TRACE_OUT(( "String only %lu long", textLen)); DC_QUIT; } // // Capabilities allow us to ignore delta X position if we have an exact // match. // if ((matchQuality & FH_SC_EXACT) != 0) { // // Exit immediately, providing that there is no override to always // send increments. // if (!(g_oeFontCaps & CAPS_FONT_NEED_X_ALWAYS)) { TRACE_OUT(( "Font has exact match")); DC_QUIT; } } // // We have passed all the checks - we must send a delta X array. // TRACE_OUT(( "Must send delta X")); *pSendDeltaX = TRUE; DC_EXIT_POINT: DebugExitDWORD(OECheckFontIsSupported, rc); return(rc); } // // Function: OELPtoVirtual // // Description: Adjusts window coordinates to virtual desktop coordinates. // Clips the result to [+32766, -32768]. // // Parameters: pPoints - Array of points to be converted // cPoints - Number of points to be converted // // Returns: (none) // void OELPtoVirtual ( LPPOINT aPts, UINT cPts ) { int l; TSHR_INT16 s; DebugEntry(OELPtoVirtual); // // Convert to screen coordinates // while (cPts > 0) { // // Look for int16 overflow in the X coordinate // l = aPts->x; s = (TSHR_INT16)l; if (l == (int)s) { aPts->x = s; } else { // // HIWORD(l) will be 1 for positive overflow, 0xFFFF for // negative overflow. Therefore we will get 0x7FFE or 0x8000 // (+32766 or -32768). // aPts->x = 0x7FFF - HIWORD(l); TRACE_OUT(("adjusted X from %ld to %d", l, aPts->x)); } // // Look for int16 overflow in the Y coordinate // l = aPts->y; s = (TSHR_INT16)l; if (l == (int)s) { aPts->y = s; } else { // // HIWORD(l) will be 1 for positive overflow, 0xFFFF for // negative overflow. Therefore we will get 0x7FFE or 0x8000 // (+32766 or -32768). // aPts->y = 0x7FFF - HIWORD(l); TRACE_OUT(("adjusted Y from %ld to %d", l, aPts->y)); } // // Move on to the next point // --cPts; ++aPts; } DebugExitVOID(OELPtoVirtual); } // // Function: OELRtoVirtual // // Description: Adjusts RECT in window coordinates to virtual coordinates. // Clips the result to [+32766, -32768]. // // Parameters: pRects - Array of rects to be converted // numRects - Number of rects to be converted // // Returns: (none) // // NB. This function takes a Windows rectangle (exclusive coords) and // returns a DC-Share rectangle (inclusive coords). // void OELRtoVirtual ( LPRECT aRects, UINT cRects ) { DebugEntry(OELRtoVirtual); // // Convert the points to screen coords, clipping to INT16s // OELPtoVirtual((LPPOINT)aRects, 2 * cRects); // // Make each rectangle inclusive // while (cRects > 0) { aRects->right--; aRects->bottom--; // // Move on to the next rect // cRects--; aRects++; } DebugExitVOID(OELRtoVirtual); } // // Function: OEClipAndAddOrder // // Description: Adds the order to the order buffer, splitting it up into // multiple orders if the clipping is complicated. If we fail // to send the full order, we accumulate it in the SDA instead // // Parameters: pOrder - Order to be stored. // pExtraInfo - Pointer to extra data associated with the // order. This data depends on the order type, // and may be NULL. // pco - Clipping object for the area // // Returns: (none) // void OEClipAndAddOrder(LPINT_ORDER pOrder, void * pExtraInfo, CLIPOBJ* pco) { BOOL fOrderClipped; BOOL fMoreRects; RECT clippedRect; RECT orderRect; LPINT_ORDER pNewOrder; LPINT_ORDER pLastOrder = NULL; OE_ENUMRECTS clip; UINT i; UINT numRects = 0; DebugEntry(OEClipAndAddOrder); // // Convert the order rectangle passed in (in virtual co-ordinates) back // to screen co-ordinates. It is going to be clipped against clip // rectangles returned to us in screen co-ordinates. // // Note that we also convert to exclusive coords here to make // comparison with the exclusive Windows coords easier. // orderRect.left = pOrder->OrderHeader.Common.rcsDst.left; orderRect.top = pOrder->OrderHeader.Common.rcsDst.top; orderRect.right = pOrder->OrderHeader.Common.rcsDst.right + 1; orderRect.bottom = pOrder->OrderHeader.Common.rcsDst.bottom + 1; fOrderClipped = FALSE; TRACE_OUT(( "orderRect: (%d,%d)(%d,%d)", orderRect.left, orderRect.top, orderRect.right, orderRect.bottom)); // // Check if we have a clipping object at all. // if ((pco == NULL) || (pco->iDComplexity == DC_TRIVIAL)) { // // No clipping object - just use the bounds // clippedRect = orderRect; fOrderClipped = TRUE; pLastOrder = pOrder; } else if (pco->iDComplexity == DC_RECT) { // // One clipping rectangle - use it directly. // RECT_FROM_RECTL(clippedRect, pco->rclBounds); clippedRect.left = max(clippedRect.left, orderRect.left); clippedRect.bottom = min(clippedRect.bottom, orderRect.bottom); clippedRect.right = min(clippedRect.right, orderRect.right); clippedRect.top = max(clippedRect.top, orderRect.top); fOrderClipped = TRUE; pLastOrder = pOrder; } else { // // OA can only cope as long as the orders are added in the same // order that they were allocated, so we need to do a little // shuffling here. // // We always keep one order outstanding (pLastOrder) and a flag to // indicate if it is valid (fOrderClipped). The first time we find // a valid clipping rectangle, we set up pLastOrder and // fOrderClipped. If we find we need to allocate a new order, we // request the memory for the new order (pNewOrder), add pLastOrder // and store pNewOrder in pLastOrder. // // Once we have finished enumerating the clipping rectangles, if // pLastOrder is valid, we add it in. // // Also, while we are adding all these orders, OA must not purge // the order heap otherwise we'll be left holding an invalid // pointer. // pNewOrder = pOrder; g_oaPurgeAllowed = FALSE; // // Multiple clipping rectangles - Enumerate all the rectangles // involved in this drawing operation. // The documentation for this function incorrectly states that // the returned value is the total number of rectangles // comprising the clip region. In fact, -1 is always returned, // even when the final parameter is non-zero. // CLIPOBJ_cEnumStart(pco, FALSE, CT_RECTANGLES, CD_ANY, 0); // // Get the clip rectangles. We fetch these into the clip buffer // which is big enough to get all the clip rectangles we expect + 1. // If the order runs across this number of clip rects or more then // we will already have decided to send it as screen data. // The clip rectangle fetching is contained within a loop because, // while we expect to call CLIPOBJ_bEnum once only, it is possible // for this functio to return zero rects and report that there are // more to fetch (according to MSDN). // do { fMoreRects = CLIPOBJ_bEnum(pco, sizeof(clip), (ULONG *)&clip.rects); // // The clipping object can decide that there are no more // rectangles and that this query has returned no rectangles, // so we must check for any valid data in the returned // rectangle list. // if (clip.rects.c == 0) { // // We didn't get any rects this time so go round again - if // we're finished, the loop termination condition will take // us out. CLIPOBJ_bEnum can return a count of zero when // there are still more rects. // TRACE_OUT(( "No rects this time, more %u", fMoreRects)); continue; } // // To get to here we expect to have fetched all the rects and // no more. Do a quick check. // numRects += clip.rects.c; ASSERT( (numRects <= COMPLEX_CLIP_RECT_COUNT) ); // // Process each clip rectangle by clipping the drawing order to // it. // for ( i = 0; i < clip.rects.c; i++ ) { TRACE_OUT(( " (%d,%d)(%d,%d)", clip.rects.arcl[i].left, clip.rects.arcl[i].top, clip.rects.arcl[i].right, clip.rects.arcl[i].bottom)); // // Check for an intersection // if ( (clip.rects.arcl[i].left >= orderRect.right) || (clip.rects.arcl[i].bottom <= orderRect.top) || (clip.rects.arcl[i].right <= orderRect.left) || (clip.rects.arcl[i].top >= orderRect.bottom) ) { // // No intersection, move on to next clip rect. // continue; } // // There is an intersection, so we may need to add a new // order to the buffer to cater for this rectangle. // if (fOrderClipped) { // // The order has already been clipped once, so it // actually intersects more than one clip rect, ie // fOrderClipped is always FALSE for at least the first // clip rectangle in the clip.rects buffer. We cope // with this by duplicating the order and clipping it // again. // pNewOrder = OA_DDAllocOrderMem( pLastOrder->OrderHeader.Common.cbOrderDataLength, 0); if (pNewOrder == NULL) { WARNING_OUT(( "Order memory allocation failed" )); goto CLIP_ORDER_FAILED; } // // Copy the header & data from the original order to // the new order (making sure that we don't overwrite // the list information at the start of the header). // memcpy((LPBYTE)pNewOrder + FIELD_SIZE(INT_ORDER, OrderHeader.list), (LPBYTE)pLastOrder + FIELD_SIZE(INT_ORDER, OrderHeader.list), pLastOrder->OrderHeader.Common.cbOrderDataLength + sizeof(INT_ORDER_HEADER) - FIELD_SIZE(INT_ORDER, OrderHeader.list)); // // Set the destination (clip) rectangle (in virtual // desktop coordinates). // TSHR_RECT16_FROM_RECT( &pLastOrder->OrderHeader.Common.rcsDst, clippedRect); pLastOrder->OrderHeader.Common.rcsDst.right -= 1; pLastOrder->OrderHeader.Common.rcsDst.bottom -= 1; TRACE_OUT(( "Adding duplicate order (%d,%d) (%d,%d)", pLastOrder->OrderHeader.Common.rcsDst.left, pLastOrder->OrderHeader.Common.rcsDst.top, pLastOrder->OrderHeader.Common.rcsDst.right, pLastOrder->OrderHeader.Common.rcsDst.bottom)); // // Add the order to the Order List. // OA_DDAddOrder(pLastOrder, pExtraInfo); } // // Update the clipping rectangle for the order to be sent. // clippedRect.left = max(clip.rects.arcl[i].left, orderRect.left); clippedRect.bottom= min(clip.rects.arcl[i].bottom, orderRect.bottom); clippedRect.right = min(clip.rects.arcl[i].right, orderRect.right); clippedRect.top = max(clip.rects.arcl[i].top, orderRect.top); fOrderClipped = TRUE; pLastOrder = pNewOrder; } } while (fMoreRects); } // // Check whether the clipping has removed the order entirely. // if (fOrderClipped) { TSHR_RECT16_FROM_RECT(&pLastOrder->OrderHeader.Common.rcsDst, clippedRect); pLastOrder->OrderHeader.Common.rcsDst.right -= 1; pLastOrder->OrderHeader.Common.rcsDst.bottom -= 1; TRACE_OUT(( "Adding order (%d,%d) (%d,%d)", pLastOrder->OrderHeader.Common.rcsDst.left, pLastOrder->OrderHeader.Common.rcsDst.top, pLastOrder->OrderHeader.Common.rcsDst.right, pLastOrder->OrderHeader.Common.rcsDst.bottom)); // // Add the order to the Order List. // OA_DDAddOrder(pLastOrder, pExtraInfo); } else { TRACE_OUT(( "Order clipped completely")); OA_DDFreeOrderMem(pOrder); } DC_QUIT; CLIP_ORDER_FAILED: // // Allocation of memory for a duplicate order failed. Just add the // original order's destination rect into the SDA and free the order. // // The order rectangle is already in inclusive virtual coordinates. // TRACE_OUT(( "Order add failed, add to SDA")); RECT_FROM_TSHR_RECT16(&orderRect,pLastOrder->OrderHeader.Common.rcsDst); OA_DDFreeOrderMem(pLastOrder); BA_AddScreenData(&orderRect); DC_EXIT_POINT: // // Make sure that we always re-enable heap purging. // g_oaPurgeAllowed = TRUE; DebugExitVOID(OEClipAndAddOrder); } // // Function: OEClipAndAddScreenData // // Description: Determines if we need to accumulate any screen data for the // specified area. If so, it is added to the SDA. // // Parameters: pRect - Bounding rectangle of area to be accumulated // pco - Clipping object for the area // // Returns: (none) // void OEClipAndAddScreenData(LPRECT pRect, CLIPOBJ* pco) { RECT SDACandidate; BOOL fMoreRects; RECT clippedRect; OE_ENUMRECTS clip; UINT i; DebugEntry(OEClipAndAddScreenData); // // Convert the order rectangle passed in (in virtual co-ordinates) back // to screen co-ordinates. It is going to be clipped against clip // rectangles returned to us in screen co-ordinates. // // Note that we also convert to exclusive coords here to make // comparison with the exclusive Windows coords easier. // SDACandidate.left = pRect->left; SDACandidate.top = pRect->top; SDACandidate.right = pRect->right + 1; SDACandidate.bottom = pRect->bottom + 1; TRACE_OUT(( "SDACandidate: (%d,%d)(%d,%d)", SDACandidate.left, SDACandidate.top, SDACandidate.right, SDACandidate.bottom)); // // Check if we have a clipping object at all. // if ((pco == NULL) || (pco->iDComplexity == DC_TRIVIAL)) { // // Convert the clipped rect into Virtual Desktop coords. // clippedRect = SDACandidate; clippedRect.right -= 1; clippedRect.bottom -= 1; // // Add the clipped rect into the SDA. // TRACE_OUT(( "Adding SDA (%d,%d)(%d,%d)", clippedRect.left, clippedRect.top, clippedRect.right, clippedRect.bottom)); BA_AddScreenData(&clippedRect); } else if (pco->iDComplexity == DC_RECT) { // // One clipping rectangle - use it directly, converting into // Virtual Desktop coords. Make sure the rectangle is valid before // adding to the SDA. // RECT_FROM_RECTL(clippedRect, pco->rclBounds); clippedRect.left = max(clippedRect.left, SDACandidate.left); clippedRect.right = min(clippedRect.right, SDACandidate.right) + -1; if ( clippedRect.left <= clippedRect.right ) { clippedRect.bottom = min(clippedRect.bottom, SDACandidate.bottom) + -1; clippedRect.top = max(clippedRect.top, SDACandidate.top); if ( clippedRect.bottom >= clippedRect.top ) { // // Add the clipped rect into the SDA. // TRACE_OUT(( "Adding SDA RECT (%d,%d)(%d,%d)", clippedRect.left, clippedRect.top, clippedRect.right, clippedRect.bottom)); BA_AddScreenData(&clippedRect); } } } else { // // Enumerate all the rectangles involved in this drawing operation. // The documentation for this function incorrectly states that // the returned value is the total number of rectangles // comprising the clip region. In fact, -1 is always returned, // even when the final parameter is non-zero. // CLIPOBJ_cEnumStart(pco, FALSE, CT_RECTANGLES, CD_ANY, 0); do { // // Get the next batch of clipping rectangles // fMoreRects = CLIPOBJ_bEnum(pco, sizeof(clip), (ULONG *)&clip.rects); for ( i = 0; i < clip.rects.c; i++ ) { TRACE_OUT(( " (%d,%d)(%d,%d)", clip.rects.arcl[i].left, clip.rects.arcl[i].top, clip.rects.arcl[i].right, clip.rects.arcl[i].bottom)); // // Intersect the SDA rect with the clip rect, checking for // no intersection. // clippedRect.left = max( clip.rects.arcl[i].left, SDACandidate.left ); clippedRect.right = min( clip.rects.arcl[i].right, SDACandidate.right ); if (clippedRect.left >= clippedRect.right) { // // No horizontal intersection. // continue; } clippedRect.bottom = min( clip.rects.arcl[i].bottom, SDACandidate.bottom ); clippedRect.top = max( clip.rects.arcl[i].top, SDACandidate.top ); if (clippedRect.top >= clippedRect.bottom) { // // No vertical intersection. // continue; } // // Convert the clipped rect into Virtual Desktop coords. // clippedRect.right -= 1; clippedRect.bottom -= 1; // // Add the clipped rect into the SDA. // TRACE_OUT(( "Adding SDA (%d,%d)(%d,%d)", clippedRect.left, clippedRect.top, clippedRect.right, clippedRect.bottom)); BA_AddScreenData(&clippedRect); } } while (fMoreRects); } DebugExitVOID(OEClipAndAddScreenData); } // // FUNCTION: OEDDSetNewFonts // // DESCRIPTION: // // Set the new font handling information to be used by the display driver. // // RETURNS: // // NONE // // void OEDDSetNewFonts(LPOE_NEW_FONTS pRequest) { UINT cbNewSize; DebugEntry(OEDDSetNewFonts); TRACE_OUT(( "New fonts %d", pRequest->countFonts)); // // Initialize new number of fonts to zero in case an error happens. // We don't want to use stale font info if so. // g_oeNumFonts = 0; g_oeFontCaps = pRequest->fontCaps; // // Free our previous font block if we had one. // if (g_poeLocalFonts) { EngFreeMem(g_poeLocalFonts); g_poeLocalFonts = NULL; } // // Alloc a new one, the size of the new font block. // cbNewSize = pRequest->countFonts * sizeof(LOCALFONT); g_poeLocalFonts = EngAllocMem(0, cbNewSize, OSI_ALLOC_TAG); if (! g_poeLocalFonts) { ERROR_OUT(("OEDDSetNewFonts: can't allocate space for font info")); DC_QUIT; } // // OK, if we're here, this is going to succeed. Copy the info over. // g_oeNumFonts = pRequest->countFonts; memcpy(g_poeLocalFonts, pRequest->fontData, cbNewSize); memcpy(g_oeLocalFontIndex, pRequest->fontIndex, sizeof(g_oeLocalFontIndex[0]) * FH_LOCAL_INDEX_SIZE); DC_EXIT_POINT: DebugExitVOID(OEDDSetNewFonts); } // // FUNCTION: OEDDSetNewCapabilities // // DESCRIPTION: // // Set the new OE related capabilities // // RETURNS: // // NONE // // PARAMETERS: // // pDataIn - pointer to the input buffer // // void OEDDSetNewCapabilities(LPOE_NEW_CAPABILITIES pCapabilities) { DebugEntry(OEDDSetNewCapabilities); // // Copy the data from the Share Core. // g_oeBaselineTextEnabled = pCapabilities->baselineTextEnabled; g_oeSendOrders = pCapabilities->sendOrders; g_oeTextEnabled = pCapabilities->textEnabled; // // The share core has passed down a pointer to it's copy of the order // support array. We take a copy for the kernel here. // memcpy(g_oeOrderSupported, pCapabilities->orderSupported, sizeof(g_oeOrderSupported)); TRACE_OUT(( "OE caps: BLT %c Orders %c Text %c", g_oeBaselineTextEnabled ? 'Y': 'N', g_oeSendOrders ? 'Y': 'N', g_oeTextEnabled ? 'Y': 'N')); DebugExitVOID(OEDDSetNewCapabilities); } // // Function: OETileBitBltOrder // // Description: Divides a single large BitBlt order into a series of small, // "tiled" BitBlt orders, each of which is added to the order // queue. // // Parameters: pOrder - Template order to be tiled // pExtraInfo - Structure containing pointers to the source // and destination surface objects, and a pointer // to the color translation object for the Blt // pco - Clipping object for the operation // // Returns: TRUE - Stored in orders (and possibly some SDA) // FALSE- Stored in SDA (or contained bad data) // // void OETileBitBltOrder ( LPINT_ORDER pOrder, LPMEMBLT_ORDER_EXTRA_INFO pExtraInfo, CLIPOBJ* pco ) { UINT tileWidth; UINT tileHeight; int srcLeft; int srcTop; int srcRight; int srcBottom; int xFirstTile; int yFirstTile; int xTile; int yTile; UINT type; int bmpWidth, bmpHeight; RECT destRect; DebugEntry(OETileBitBltOrder); // // Extract the src bitmap handle from the Order - if the order is not a // memory to screen blit, we get out now. // type = ((LPMEMBLT_ORDER)pOrder->abOrderData)->type; switch (type) { case ORD_MEMBLT_TYPE: { srcLeft = ((LPMEMBLT_ORDER)pOrder->abOrderData)->nXSrc; srcTop = ((LPMEMBLT_ORDER)pOrder->abOrderData)->nYSrc; srcRight = srcLeft + ((LPMEMBLT_ORDER)pOrder->abOrderData)->nWidth; srcBottom = srcTop + ((LPMEMBLT_ORDER)pOrder->abOrderData)->nHeight; destRect.left = ((LPMEMBLT_ORDER)pOrder->abOrderData)->nLeftRect; destRect.top = ((LPMEMBLT_ORDER)pOrder->abOrderData)->nTopRect; destRect.right = destRect.left + ((LPMEMBLT_ORDER)pOrder->abOrderData)->nWidth; destRect.bottom= destRect.top + ((LPMEMBLT_ORDER)pOrder->abOrderData)->nHeight; } break; case ORD_MEM3BLT_TYPE: { srcLeft = ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nXSrc; srcTop = ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nYSrc; srcRight = srcLeft + ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nWidth; srcBottom = srcTop + ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nHeight; destRect.left = ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nLeftRect; destRect.top = ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nTopRect; destRect.right= destRect.left + ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nWidth; destRect.bottom = destRect.top + ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nHeight; } break; default: { ERROR_OUT(( "Invalid order type %u", type)); } break; } // // Fetch the bitmap details. // bmpWidth = (int)pExtraInfo->pSource->sizlBitmap.cx; bmpHeight = (int)pExtraInfo->pSource->sizlBitmap.cy; if (!SBC_DDQueryBitmapTileSize(bmpWidth, bmpHeight, &tileWidth, &tileHeight)) { // // This could happen if some 2.x user joins the share. // TRACE_OUT(("Bitmap is not tileable")); OEClipAndAddScreenData(&destRect, pco); } else { // // Tile the order. If an individual tile fails to get queued as an // order, OEAddTiledBitBltOrder() will add it as screen data. Hence // no return value to be checked. // xFirstTile = srcLeft - (srcLeft % tileWidth); yFirstTile = srcTop - (srcTop % tileHeight); for (yTile = yFirstTile; yTile < srcBottom; yTile += tileHeight) { for (xTile = xFirstTile; xTile < srcRight; xTile += tileWidth) { OEAddTiledBitBltOrder(pOrder, pExtraInfo, pco, xTile, yTile, tileWidth, tileHeight); } } } DebugExitVOID(OETileBitBltOrder); } // // Function: OEAddTiledBitBltOrder // // Description: Takes an unmodified "large" BitBlt and a tile rectangle, // makes a copy of the order and modifies the copied order's // src/dest so it applies to the source tile only. The order // is added to the order queue. If the allocation of the // "tiled" order fails, the destination rect is added to SDA // // Parameters: pOrder - Template order to be added // pExtraInfo - Pointer to the extra BitBlt info // pco - Clipping object for the BitBlt // xTile - X position of the tile // yTile - Y position of the tile // tileWidth - tile width // tileHeight - tile height // // Returns: none // // void OEAddTiledBitBltOrder( LPINT_ORDER pOrder, LPMEMBLT_ORDER_EXTRA_INFO pExtraInfo, CLIPOBJ* pco, int xTile, int yTile, UINT tileWidth, UINT tileHeight) { LPINT_ORDER pTileOrder; LPINT pXSrc = NULL; LPINT pYSrc = NULL; LPINT pLeft = NULL; LPINT pTop = NULL; LPINT pWidth = NULL; LPINT pHeight = NULL; RECT srcRect; RECT destRect; UINT type; DebugEntry(OETileAndAddBitBltOrder); // // This is a trusted interface - assume the type is correct // type = ((LPMEMBLT_ORDER)pOrder->abOrderData)->type; ASSERT(((type == ORD_MEMBLT_TYPE) || (type == ORD_MEM3BLT_TYPE))); // // Do processing which depends on the type of bit blt being tiled: // - save existing src and dest rects // - make a copy of the order (which will be the tile order) // - save pointers to the fields in the tile order which we're likely // to change. // if (type == ORD_MEMBLT_TYPE) { srcRect.left = ((LPMEMBLT_ORDER)pOrder->abOrderData)->nXSrc; srcRect.top = ((LPMEMBLT_ORDER)pOrder->abOrderData)->nYSrc; srcRect.right = srcRect.left + ((LPMEMBLT_ORDER)pOrder->abOrderData)->nWidth; srcRect.bottom = srcRect.top + ((LPMEMBLT_ORDER)pOrder->abOrderData)->nHeight; destRect.left = ((LPMEMBLT_ORDER)pOrder->abOrderData)->nLeftRect; destRect.top = ((LPMEMBLT_ORDER)pOrder->abOrderData)->nTopRect; // // We must allocate enough space for the maximum size order that // SBC may use (i.e. an R2 order). We default to filling in the // data as an R1 order. // pTileOrder = OA_DDAllocOrderMem(sizeof(MEMBLT_R2_ORDER),0); if (pTileOrder == NULL) { TRACE_OUT(( "No space for tile order")); DC_QUIT; } // // We must not mess up the linked list data in the orders. // RtlCopyMemory(((LPBYTE)pTileOrder) + FIELD_SIZE(INT_ORDER, OrderHeader.list), ((LPBYTE)pOrder) + FIELD_SIZE(INT_ORDER, OrderHeader.list), sizeof(INT_ORDER_HEADER) + sizeof(MEMBLT_R2_ORDER) - FIELD_SIZE(INT_ORDER, OrderHeader.list)); pXSrc = &((LPMEMBLT_ORDER)pTileOrder->abOrderData)->nXSrc; pYSrc = &((LPMEMBLT_ORDER)pTileOrder->abOrderData)->nYSrc; pWidth = &((LPMEMBLT_ORDER)pTileOrder->abOrderData)->nWidth; pHeight = &((LPMEMBLT_ORDER)pTileOrder->abOrderData)->nHeight; pLeft = &((LPMEMBLT_ORDER)pTileOrder->abOrderData)->nLeftRect; pTop = &((LPMEMBLT_ORDER)pTileOrder->abOrderData)->nTopRect; } else { srcRect.left = ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nXSrc; srcRect.top = ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nYSrc; srcRect.right = srcRect.left + ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nWidth; srcRect.bottom = srcRect.top + ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nHeight; destRect.left = ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nLeftRect; destRect.top = ((LPMEM3BLT_ORDER)pOrder->abOrderData)->nTopRect; // // We must allocate enough space for the maximum size order that // SBC may use (i.e. an R2 order). We default to filling in the // data as an R1 order. // pTileOrder = OA_DDAllocOrderMem(sizeof(MEM3BLT_R2_ORDER),0); if (pTileOrder == NULL) { TRACE_OUT(( "No space for tile order")); DC_QUIT; } // // We must not mess up the linked list data in the orders. // RtlCopyMemory(((LPBYTE)pTileOrder) + FIELD_SIZE(INT_ORDER, OrderHeader.list), ((LPBYTE)pOrder) + FIELD_SIZE(INT_ORDER, OrderHeader.list), sizeof(INT_ORDER_HEADER) + sizeof(MEM3BLT_R2_ORDER) - FIELD_SIZE(INT_ORDER, OrderHeader.list)); pXSrc = &((LPMEM3BLT_ORDER)pTileOrder->abOrderData)->nXSrc; pYSrc = &((LPMEM3BLT_ORDER)pTileOrder->abOrderData)->nYSrc; pWidth = &((LPMEM3BLT_ORDER)pTileOrder->abOrderData)->nWidth; pHeight = &((LPMEM3BLT_ORDER)pTileOrder->abOrderData)->nHeight; pLeft = &((LPMEM3BLT_ORDER)pTileOrder->abOrderData)->nLeftRect; pTop = &((LPMEM3BLT_ORDER)pTileOrder->abOrderData)->nTopRect; } TRACE_OUT(( "Tiling order, orig srcLeft=%hd, srcTop=%hd, srcRight=%hd, " "srcBottom=%hd, destX=%hd, destY=%hd; " "xTile=%hd, yTile=%hd, tileW=%hd, tileH=%hd", srcRect.left, srcRect.top, srcRect.right, srcRect.bottom, destRect.left, destRect.top, xTile, yTile, tileWidth, tileHeight)); DC_EXIT_POINT: // // NOTE: ALL THE POINTERS MAY BE NULL AT THIS POINT - DO NOT USE THEM // UNTIL YOU VERIFY PTILEORDER IS NON-NULL. // // Intersect source and tile rects, and set up destination rect // accordingly - we need to do this even if we failed to copy the // order, because the tiled source rect will have to be added to the // screen data area. // if (xTile > srcRect.left) { destRect.left += (xTile - srcRect.left); srcRect.left = xTile; } if (yTile > srcRect.top) { destRect.top += (yTile - srcRect.top); srcRect.top = yTile; } srcRect.right = min((UINT)srcRect.right, xTile + tileWidth); srcRect.bottom = min((UINT)srcRect.bottom, yTile + tileHeight); destRect.right = destRect.left + (srcRect.right - srcRect.left); destRect.bottom = destRect.top + (srcRect.bottom - srcRect.top); // // If the order was successfully copied above, then modify the order // to contain the tiled coordinates, and add it to the order list. // Otherwise, send the dest rect as screen data. // if (pTileOrder != NULL) { TRACE_OUT(( "Tile order originally: srcX=%hd, srcY=%hd, destX=%hd, " "destY=%hd, w=%hd, h=%hd", *pXSrc, *pYSrc, *pLeft, *pTop, *pWidth, *pHeight)); *pXSrc = srcRect.left; *pYSrc = srcRect.top; *pLeft = destRect.left; *pTop = destRect.top; *pWidth = srcRect.right - srcRect.left; *pHeight = srcRect.bottom - srcRect.top; pTileOrder->OrderHeader.Common.rcsDst.left = (TSHR_INT16)destRect.left; pTileOrder->OrderHeader.Common.rcsDst.right = (TSHR_INT16)destRect.right; pTileOrder->OrderHeader.Common.rcsDst.top = (TSHR_INT16)destRect.top; pTileOrder->OrderHeader.Common.rcsDst.bottom = (TSHR_INT16)destRect.bottom; TRACE_OUT(( "Adding order srcX=%hd, srcY=%hd, destX=%hd, destY=%hd," " w=%hd, h=%hd", *pXSrc, *pYSrc, *pLeft, *pTop, *pWidth, *pHeight)); OEClipAndAddOrder(pTileOrder, pExtraInfo, pco); } else { TRACE_OUT(( "Failed to allocate order - sending as screen data")); OEClipAndAddScreenData(&destRect, pco); } DebugExitVOID(OETileAndAddBitBltOrder); } // NAME: OEAddLine // // PURPOSE: // // Add a LineTo order to the order heap. // // RETURNS: // // TRUE - Attempted to add to heap // FALSE - No room left to allocate an order // // PARAMS: // // ppdev - display driver PDEV // startPoint - start point of line // endPoint - end point of line // rectDst - bounding rectangle // rop2 - ROP2 to use with line // width - width of line to add // color - color of line to add // pco - clipping object for drawing operation // BOOL OEAddLine(LPOSI_PDEV ppdev, LPPOINT startPoint, LPPOINT endPoint, LPRECT rectDst, UINT rop2, UINT width, UINT color, CLIPOBJ* pco) { BOOL rc = FALSE; LPLINETO_ORDER pLineTo; LPINT_ORDER pOrder; DebugEntry(OEAddLine); // // Allocate the memory for the order. // pOrder = OA_DDAllocOrderMem(sizeof(LINETO_ORDER),0); if (pOrder == NULL) { TRACE_OUT(( "Failed to alloc order")); DC_QUIT; } pLineTo = (LPLINETO_ORDER)pOrder->abOrderData; // // Mark this order type. // pLineTo->type = ORD_LINETO_TYPE; // // Store the line end coordinates. // pLineTo->nXStart = startPoint->x; pLineTo->nYStart = startPoint->y; pLineTo->nXEnd = endPoint->x; pLineTo->nYEnd = endPoint->y; // // We must convert these values to virtual coords. // OELPtoVirtual((LPPOINT)&pLineTo->nXStart, 2); // // Always do solid lines, so it does not matter what we specify as the // back color. // RtlFillMemory(&pLineTo->BackColor, sizeof(pLineTo->BackColor), 0); // // We only draw solid lines with no option as to what we do to the // background, so this is always transparent. // pLineTo->BackMode = TRANSPARENT; // // Get the ROP value. // pLineTo->ROP2 = rop2; // // The NT Display Driver is only called to accelerate simple solid // lines. So we only support pen styles of PS_SOLID. // pLineTo->PenStyle = PS_SOLID; // // Get the pen width. // pLineTo->PenWidth = width; // // Set up the color. // OEConvertColor(ppdev, &pLineTo->PenColor, color, NULL); TRACE_OUT(( "LineTo BC %02x%02x%02x BM %04X rop2 %02X " "pen %04X %04X %02x%02x%02x x1 %d y1 %d x2 %d y2 %d", pLineTo->BackColor.red, pLineTo->BackColor.green, pLineTo->BackColor.blue, pLineTo->BackMode, pLineTo->ROP2, pLineTo->PenStyle, pLineTo->PenWidth, pLineTo->PenColor.red, pLineTo->PenColor.green, pLineTo->PenColor.blue, pLineTo->nXStart, pLineTo->nYStart, pLineTo->nXEnd, pLineTo->nYEnd)); // // Store the general order data. The bounding rectangle must be in to // virtual desktop co-ordinates. OELRtoVirtual has already done this. // pOrder->OrderHeader.Common.fOrderFlags = OF_SPOILABLE; pOrder->OrderHeader.Common.rcsDst.left = (TSHR_INT16)rectDst->left; pOrder->OrderHeader.Common.rcsDst.right = (TSHR_INT16)rectDst->right; pOrder->OrderHeader.Common.rcsDst.top = (TSHR_INT16)rectDst->top; pOrder->OrderHeader.Common.rcsDst.bottom = (TSHR_INT16)rectDst->bottom; // // Store that order! // OEClipAndAddOrder(pOrder, NULL, pco); rc = TRUE; DC_EXIT_POINT: DebugExitDWORD(OEAddLine, rc); return(rc); } // NAME: OEEncodePatBlt // // PURPOSE: // // Attempts to encode a PatBlt order. This function allocates the memory // for the encoded order (pointer returned in ppOrder). If the function // completes successfully, it is the caller's responsibility to free this // memory. // // RETURNS: // // TRUE - Order encoded // FALSE - Order not encoded (so add to SDA) // // PARAMS: // // ppdev - display driver PDEV // pbo - brush object for the blt // pptlBrush - brush origin // rop3 - 3-way rop to use // pBounds - bounding rectangle // ppOrder - the encoded order // BOOL OEEncodePatBlt(LPOSI_PDEV ppdev, BRUSHOBJ *pbo, POINTL *pptlBrush, BYTE rop3, LPRECT pBounds, LPINT_ORDER *ppOrder) { BOOL rc = FALSE; POE_BRUSH_DATA pCurrentBrush; LPPATBLT_ORDER pPatBlt; UINT orderFlags = OF_SPOILABLE; DebugEntry(OEEncodePatBlt); // // Check for a simple brush pattern. // if ( OECheckBrushIsSimple(ppdev, pbo, &pCurrentBrush) ) { // // Allocate the memory for the order. // *ppOrder = OA_DDAllocOrderMem(sizeof(PATBLT_ORDER),0); if (*ppOrder != NULL) { pPatBlt = (LPPATBLT_ORDER)((*ppOrder)->abOrderData); // // Set the opaque flag if the rop is opaque. // if (ROP3_IS_OPAQUE(rop3)) { orderFlags |= OF_SPOILER; } // // Set up order type. // pPatBlt->type = LOWORD(ORD_PATBLT); // // Virtual desktop co-ordinates. // pPatBlt->nLeftRect = pBounds->left; pPatBlt->nTopRect = pBounds->top; pPatBlt->nWidth = pBounds->right - pBounds->left + 1; pPatBlt->nHeight = pBounds->bottom - pBounds->top + 1; pPatBlt->bRop = rop3; // // Pattern colours. // pPatBlt->BackColor = pCurrentBrush->back; pPatBlt->ForeColor = pCurrentBrush->fore; // // The protocol brush origin is the point on the screen where // we want the brush to start being drawn from (tiling where // necessary). This must be in virtual coordinates. // pPatBlt->BrushOrgX = pptlBrush->x; pPatBlt->BrushOrgY = pptlBrush->y; OELPtoVirtual((LPPOINT)&pPatBlt->BrushOrgX, 1); // // Extra brush data from the data when we realised the brush. // pPatBlt->BrushStyle = pCurrentBrush->style; pPatBlt->BrushHatch = pCurrentBrush->hatch; RtlCopyMemory(pPatBlt->BrushExtra, pCurrentBrush->brushData, sizeof(pPatBlt->BrushExtra)); TRACE_OUT(( "PatBlt BC %02x%02x%02x FC %02x%02x%02x " "Brush %02X %02X X %d Y %d w %d h %d rop %02X", pPatBlt->BackColor.red, pPatBlt->BackColor.green, pPatBlt->BackColor.blue, pPatBlt->ForeColor.red, pPatBlt->ForeColor.green, pPatBlt->ForeColor.blue, pPatBlt->BrushStyle, pPatBlt->BrushHatch, pPatBlt->nLeftRect, pPatBlt->nTopRect, pPatBlt->nWidth, pPatBlt->nHeight, pPatBlt->bRop)); // // Copy any order flags into the encoded order structure. // (*ppOrder)->OrderHeader.Common.fOrderFlags = (TSHR_UINT16)orderFlags; rc = TRUE; } else { TRACE_OUT(( "Failed to alloc order")); } } else { TRACE_OUT(( "Brush is not simple")); } DebugExitDWORD(OEEncodePatBlt, rc); return(rc); } // // DrvTransparentBlt() // NEW FOR NT5 // BOOL DrvTransparentBlt ( SURFOBJ * psoDst, SURFOBJ * psoSrc, CLIPOBJ * pco, XLATEOBJ * pxlo, RECTL * prclDst, RECTL * prclSrc, ULONG iTransColor, ULONG ulReserved ) { BOOL rc = TRUE; RECT rectSrc; RECT rectDst; BOOL fAccumulate = FALSE; DebugEntry(DrvTransparentBlt); // // DO THIS _BEFORE_ TAKING LOCK // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get bounding rectangle and convert to a RECT. // RECT_FROM_RECTL(rectSrc, (*prclSrc)); RECT_FROM_RECTL(rectDst, (*prclDst)); // // Check if we are accumulating data for this function // fAccumulate = OEAccumulateOutput(psoDst, pco, &rectDst); if (!fAccumulate) { DC_QUIT; } // // Convert to virtual coordinates. // OELRtoVirtual(&rectDst, 1); DC_EXIT_POINT: if (fAccumulate) { OEClipAndAddScreenData(&rectDst, pco); } OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitBOOL(DrvTransparentBlt, rc); return(rc); } // // DrvAlphaBlend() // NEW FOR NT5 // BOOL DrvAlphaBlend ( SURFOBJ * psoDst, SURFOBJ * psoSrc, CLIPOBJ * pco, XLATEOBJ * pxlo, RECTL * prclDst, RECTL * prclSrc, BLENDOBJ * pBlendObj ) { BOOL rc = TRUE; RECT rectSrc; RECT rectDst; BOOL fAccumulate = FALSE; DebugEntry(DrvAlphaBlend); // // DO THIS _BEFORE_ TAKING LOCK // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get bounding rectangle and convert to a RECT. // RECT_FROM_RECTL(rectSrc, (*prclSrc)); RECT_FROM_RECTL(rectDst, (*prclDst)); // // Check if we are accumulating data for this function // fAccumulate = OEAccumulateOutput(psoDst, pco, &rectDst); if (!fAccumulate) { DC_QUIT; } // // Convert to virtual coordinates. // OELRtoVirtual(&rectDst, 1); DC_EXIT_POINT: if (fAccumulate) { OEClipAndAddScreenData(&rectDst, pco); } OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitBOOL(DrvAlphaBlend, rc); return(rc); } // // DrvPlgBlt() // NEW FOR NT5 // BOOL DrvPlgBlt ( SURFOBJ * psoDst, SURFOBJ * psoSrc, SURFOBJ * psoMsk, CLIPOBJ * pco, XLATEOBJ * pxlo, COLORADJUSTMENT * pca, POINTL * pptlBrushOrg, POINTFIX * pptfx, RECTL * prclDst, POINTL * pptlSrc, ULONG iMode ) { BOOL rc = TRUE; RECT rectDst; BOOL fAccumulate = FALSE; DebugEntry(DrvPlgBlt); // // DO THIS _BEFORE_ TAKING LOCK // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get bounding rectangle and convert to a RECT. // RECT_FROM_RECTL(rectDst, (*prclDst)); // // Check if we are accumulating data for this function // fAccumulate = OEAccumulateOutput(psoDst, pco, &rectDst); if (!fAccumulate) { DC_QUIT; } // // Convert to virtual coordinates. // OELRtoVirtual(&rectDst, 1); DC_EXIT_POINT: if (fAccumulate) { OEClipAndAddScreenData(&rectDst, pco); } OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitBOOL(DrvPlgBlt, rc); return(rc); } // // DrvStretchBltROP() // NEW FOR NT5 // BOOL DrvStretchBltROP ( SURFOBJ * psoDst, SURFOBJ * psoSrc, SURFOBJ * psoMask, CLIPOBJ * pco, XLATEOBJ * pxlo, COLORADJUSTMENT * pca, POINTL * pptlHTOrg, RECTL * prclDst, RECTL * prclSrc, POINTL * pptlMask, ULONG iMode, BRUSHOBJ * pbo, DWORD rop4 ) { BOOL rc = TRUE; RECT rectSrc; RECT rectDst; BOOL fAccumulate = FALSE; DebugEntry(DrvStretchBltROP); // // DO THIS _BEFORE_ TAKING LOCK // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get bounding rectangle and convert to a RECT. // RECT_FROM_RECTL(rectSrc, (*prclSrc)); RECT_FROM_RECTL(rectDst, (*prclDst)); // // Check if we are accumulating data for this function // fAccumulate = OEAccumulateOutput(psoDst, pco, &rectDst); if (!fAccumulate) { DC_QUIT; } // // Convert to virtual coordinates. // OELRtoVirtual(&rectDst, 1); DC_EXIT_POINT: if (fAccumulate) { OEClipAndAddScreenData(&rectDst, pco); } OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitBOOL(DrvStretchBltROP, rc); return(rc); } // // DrvGradientFill() // NEW FOR NT5 // BOOL DrvGradientFill ( SURFOBJ * psoDst, CLIPOBJ * pco, XLATEOBJ * pxlo, TRIVERTEX * pVertex, ULONG nVertex, PVOID pMesh, ULONG nMesh, RECTL * prclExtents, POINTL * pptlDitherOrg, ULONG ulMode ) { BOOL rc = TRUE; RECT rectDst; BOOL fAccumulate = FALSE; DebugEntry(DrvGradientFill); // // DO THIS _BEFORE_ TAKING LOCK // if (!g_oeViewers) goto NO_LOCK_EXIT; OE_SHM_START_WRITING; // // Get bounding rectangle and convert to a RECT. // RECT_FROM_RECTL(rectDst, pco->rclBounds); // // Check if we are accumulating data for this function // fAccumulate = OEAccumulateOutput(psoDst, pco, &rectDst); if (!fAccumulate) { DC_QUIT; } // // Convert to virtual coordinates. // OELRtoVirtual(&rectDst, 1); DC_EXIT_POINT: if (fAccumulate) { OEClipAndAddScreenData(&rectDst, pco); } OE_SHM_STOP_WRITING; NO_LOCK_EXIT: DebugExitBOOL(DrvGradientFill, rc); return(rc); }