# Registry.pm -- Low-level access to functions/constants from WINREG.h package Win32API::Registry; use strict; use vars qw($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS $AUTOLOAD); $VERSION = '0.151'; require Exporter; require DynaLoader; @ISA = qw(Exporter DynaLoader); # Items to export into callers namespace by default. Note: do not export # names by default without a very good reason. Use EXPORT_OK instead. # Do not simply export all your public functions/methods/constants. @EXPORT= qw(); %EXPORT_TAGS= ( Func => [qw( AllowPriv AbortSystemShutdown InitiateSystemShutdown RegCloseKey RegConnectRegistry RegCreateKey RegCreateKeyEx RegDeleteKey RegDeleteValue RegEnumKey RegEnumKeyEx RegEnumValue RegFlushKey RegGetKeySecurity RegLoadKey RegNotifyChangeKeyValue RegOpenKey RegOpenKeyEx RegQueryInfoKey RegQueryMultipleValues RegQueryValue RegQueryValueEx RegReplaceKey RegRestoreKey RegSaveKey RegSetKeySecurity RegSetValue RegSetValueEx RegUnLoadKey )], FuncA => [qw( AbortSystemShutdownA InitiateSystemShutdownA RegConnectRegistryA RegCreateKeyA RegCreateKeyExA RegDeleteKeyA RegDeleteValueA RegEnumKeyA RegEnumKeyExA RegEnumValueA RegLoadKeyA RegOpenKeyA RegOpenKeyExA RegQueryInfoKeyA RegQueryMultipleValuesA RegQueryValueA RegQueryValueExA RegReplaceKeyA RegRestoreKeyA RegSaveKeyA RegSetValueA RegSetValueExA RegUnLoadKeyA )], FuncW => [qw( AbortSystemShutdownW InitiateSystemShutdownW RegConnectRegistryW RegCreateKeyW RegCreateKeyExW RegDeleteKeyW RegDeleteValueW RegEnumKeyW RegEnumKeyExW RegEnumValueW RegLoadKeyW RegOpenKeyW RegOpenKeyExW RegQueryInfoKeyW RegQueryMultipleValuesW RegQueryValueW RegQueryValueExW RegReplaceKeyW RegRestoreKeyW RegSaveKeyW RegSetValueW RegSetValueExW RegUnLoadKeyW )], HKEY_ => [qw( HKEY_CLASSES_ROOT HKEY_CURRENT_CONFIG HKEY_CURRENT_USER HKEY_DYN_DATA HKEY_LOCAL_MACHINE HKEY_PERFORMANCE_DATA HKEY_USERS )], KEY_ => [qw( KEY_QUERY_VALUE KEY_SET_VALUE KEY_CREATE_SUB_KEY KEY_ENUMERATE_SUB_KEYS KEY_NOTIFY KEY_CREATE_LINK KEY_READ KEY_WRITE KEY_EXECUTE KEY_ALL_ACCESS )], REG_ => [qw( REG_OPTION_RESERVED REG_OPTION_NON_VOLATILE REG_OPTION_VOLATILE REG_OPTION_CREATE_LINK REG_OPTION_BACKUP_RESTORE REG_OPTION_OPEN_LINK REG_LEGAL_OPTION REG_CREATED_NEW_KEY REG_OPENED_EXISTING_KEY REG_WHOLE_HIVE_VOLATILE REG_REFRESH_HIVE REG_NO_LAZY_FLUSH REG_NOTIFY_CHANGE_ATTRIBUTES REG_NOTIFY_CHANGE_NAME REG_NOTIFY_CHANGE_LAST_SET REG_NOTIFY_CHANGE_SECURITY REG_LEGAL_CHANGE_FILTER REG_NONE REG_SZ REG_EXPAND_SZ REG_BINARY REG_DWORD REG_DWORD_LITTLE_ENDIAN REG_DWORD_BIG_ENDIAN REG_LINK REG_MULTI_SZ REG_RESOURCE_LIST REG_FULL_RESOURCE_DESCRIPTOR REG_RESOURCE_REQUIREMENTS_LIST )], ); @EXPORT_OK= (); { my $ref; foreach $ref ( values(%EXPORT_TAGS) ) { push( @EXPORT_OK, @$ref ); } } $EXPORT_TAGS{ALL}= \@EXPORT_OK; ####################################################################### # This AUTOLOAD is used to 'autoload' constants from the constant() # XS function. If a constant is not found then control is passed # to the AUTOLOAD in AutoLoader. sub AUTOLOAD { my($constname); ($constname = $AUTOLOAD) =~ s/.*:://; #reset $! to zero to reset any current errors. $!=0; my $val = constant($constname, @_ ? $_[0] : 0); if ($! != 0) { if ($! =~ /Invalid/) { $AutoLoader::AUTOLOAD = $AUTOLOAD; goto &AutoLoader::AUTOLOAD; } else { my($pack,$file,$line)= caller; die "Your vendor has not defined ", __PACKAGE__, " macro $constname, used at $file line $line."; } } eval "sub $AUTOLOAD { $val }"; goto &$AUTOLOAD; } bootstrap Win32API::Registry $VERSION; # Preloaded methods go here. # Replace "&rout;" with "goto &rout;" when that is supported on Win32. # Let user omit all buffer sizes: sub RegEnumKeyExA { if( 6 == @_ ) { splice(@_,4,0,[]); splice(@_,2,0,[]); } &_RegEnumKeyExA; } sub RegEnumKeyExW { if( 6 == @_ ) { splice(@_,4,0,[]); splice(@_,2,0,[]); } &_RegEnumKeyExW; } sub RegEnumValueA { if( 6 == @_ ) { splice(@_,2,0,[]); push(@_,[]); } &_RegEnumValueA; } sub RegEnumValueW { if( 6 == @_ ) { splice(@_,2,0,[]); push(@_,[]); } &_RegEnumValueW; } sub RegQueryInfoKeyA { if( 11 == @_ ) { splice(@_,2,0,[]); } &_RegQueryInfoKeyA; } sub RegQueryInfoKeyW { if( 11 == @_ ) { splice(@_,2,0,[]); } &_RegQueryInfoKeyW; } sub RegGetKeySecurity { push(@_,[]) if 3 == @_; &_RegGetKeySecurity; } sub RegQueryMultipleValuesA { push(@_,[]) if 4 == @_; &_RegQueryMultipleValuesA; } sub RegQueryMultipleValuesW { push(@_,[]) if 4 == @_; &_RegQueryMultipleValuesW; } sub RegQueryValueA { push(@_,[]) if 3 == @_; &_RegQueryValueA; } sub RegQueryValueW { push(@_,[]) if 3 == @_; &_RegQueryValueW; } sub RegQueryValueExA { push(@_,[]) if 5 == @_; &_RegQueryValueExA; } sub RegQueryValueExW { push(@_,[]) if 5 == @_; &_RegQueryValueExW; } sub RegEnumKeyA { push(@_,0) if 3 == @_; &_RegEnumKeyA; } sub RegEnumKeyW { push(@_,0) if 3 == @_; &_RegEnumKeyW; } sub RegSetValueA { push(@_,0) if 4 == @_; &_RegSetValueA; } sub RegSetValueW { push(@_,0) if 4 == @_; &_RegSetValueW; } sub RegSetValueExA { push(@_,0) if 5 == @_; &_RegSetValueExA; } sub RegSetValueExW { push(@_,0) if 5 == @_; &_RegSetValueExW; } # Aliases for non-Unicode functions: sub AbortSystemShutdown { &AbortSystemShutdownA; } sub InitiateSystemShutdown { &InitiateSystemShutdownA; } sub RegConnectRegistry { &RegConnectRegistryA; } sub RegCreateKey { &RegCreateKeyA; } sub RegCreateKeyEx { &RegCreateKeyExA; } sub RegDeleteKey { &RegDeleteKeyA; } sub RegDeleteValue { &RegDeleteValueA; } sub RegEnumKey { &RegEnumKeyA; } sub RegEnumKeyEx { &RegEnumKeyExA; } sub RegEnumValue { &RegEnumValueA; } sub RegLoadKey { &RegLoadKeyA; } sub RegOpenKey { &RegOpenKeyA; } sub RegOpenKeyEx { &RegOpenKeyExA; } sub RegQueryInfoKey { &RegQueryInfoKeyA; } sub RegQueryMultipleValues { &RegQueryMultipleValuesA; } sub RegQueryValue { &RegQueryValueA; } sub RegQueryValueEx { &RegQueryValueExA; } sub RegReplaceKey { &RegReplaceKeyA; } sub RegRestoreKey { &RegRestoreKeyA; } sub RegSaveKey { &RegSaveKeyA; } sub RegSetValue { &RegSetValueA; } sub RegSetValueEx { &RegSetValueExA; } sub RegUnLoadKey { &RegUnLoadKeyA; } # Autoload methods go after =cut, and are processed by the autosplit program. 1; __END__ =head1 NAME Win32API::Registry - Low-level access to Win32 system API calls from WINREG.H =head1 SYNOPSIS use Win32API::Registry 0.13 qw( :ALL ); RegOpenKeyEx( HKEY_LOCAL_MACHINE, "SYSTEM\\Disk", 0, KEY_READ, $key ); or die "Can't open HKEY_LOCAL_MACHINE\\SYSTEM\\Disk: $^E\n"; RegQueryValueEx( $key, "Information", [], $type, $data, [] ); or die "Can't read HKEY_L*MACHINE\\SYSTEM\\Disk\\Information: $^E\n"; [...] RegCloseKey( $key ) and die "Can't close HKEY_LOCAL_MACHINE\\SYSTEM\\Disk: $^E\n"; =head1 DESCRIPTION This provides fairly low-level access to the Win32 System API calls dealing with the Registry (mostly from WINREG.H). This is mostly intended to be used by other modules such as C [which provides an extremely Perl-friendly method for using the Registry]. For a description of the logical structure of the Registry, see the documentation for the C module. To pass in C as the pointer to an optional buffer, pass in an empty list reference, C<[]>. Beyond raw access to the API calls and related constants, this module handles smart buffer allocation and translation of return codes. All calls return a true value for success and a false value for failure. After any failure, C<$^E> should automatically be set to indicate the reason. If you have a version of Perl that does not yet connect C<$^E> to C under Win32, then you can use C<$iError= Win32::GetLastError()> to get the numeric error code and pass that to C to to get the descriptive string, or just C. Note that C<$!> is not set by these routines except by C when a constant is not defined. =head2 The Win32API:: heirarchy This and the other Win32API:: modules are meant to expose the nearly raw API calls so they can be used from Perl code in any way they might be used from C code. This provides the following advantages: =over =item Many modules can be written by people that don't have a C compiler. =item Encourages more module code to be written in Perl [not C]. Perl code is often much easier to inspect, debug, customize, and enhance than XS code. =item Allows those already familiar with the Win32 API to get off to a quick start. =item Provides an interactive tool [Perl] for exploring even obscure details of the Win32 API. =item Ensures that native Win32 data structures can be used. This allows maximum efficiency. It also allows data from one module [for example, time or security information from the C or C modules] to be used with other modules [for example, C and C]. =item Provides a single version of the XS interface to each API call where improvements can be collected. =back =head2 Buffer sizes For each argument that specifies a buffer size, a value of C<0> can be passed. For arguments that are pointers to buffer sizes, you can also pass in C by specifying an empty list reference, C<[]>. Both of these cases will ensure that the variable has E buffer space allocated to it and pass in that buffer's allocated size. Many of the calls indicate, via C, that the buffer size was not sufficient and the F code will automatically enlarge the buffer to the required size and repeat the call. Numeric buffer sizes are used as minimum initial sizes for the buffers. The larger of this size and the size of space already allocated to the scalar will be passed to the underlying routine. If that size was insufficient, and the underlying call provides an easy method for determining the needed buffer size, then the buffer will be enlarged and the call repeated as above. The underlying calls define buffer size arguments as unsigned, so negative buffer sizes are treated as very large positive buffer sizes which usually cause C to fail. To force the F code to pass in a specific value for a buffer size, preceed the size with C<"=">. Buffer sizes that are passed in as strings starting with an equal sign will have the equal sign stripped and the remainder of the string interpretted as a number [via C's C using only base 10] which will be passed to the underlying routine [even if the allocated buffer is actually larger]. The F code will enlarge the buffer to the specified size, if needed, but will not enlarge the buffer based on the underlying routine requesting more space. Some Reg*() calls may not currently set the buffer size when they return C. But some that are not documented as doing so, currently do so anyway. So the code assumes that any routine E do this and resizes any buffers and repeats the call. We hope that eventually all routines will provide this feature. When you use C<[]> for a buffer size, you can still find the length of the data returned by using C. Note that this length will be in bytes while a few of the buffer sizes would have been in units of wide characters. Note that the RegQueryValueEx*() and RegEnumValue*() calls will trim the trailing C<'\0'> [if present] from the returned data values of type C or C but only if the value data length argument is omitted [or specified as C<[]>]. The RegSetValueEx*() calls will add a trailing C<'\0'> [if missing] to the supplied data values of type C and C but only if the value data length argument is omitted [or specified as C<0>]. =head2 Exports Nothing is exported by default. The following tags can be used to have sets of symbols exported. [Note that much of the following documentation refers to the behavior of the underlying API calls which may vary in current and future versions of the Win32 API without any changes to this module. Therefore you should check the Win32 API documentation directly when needed.] =over =item :Func The basic function names: =over =item AllowPriv( $sPrivName, $bEnable ) Not a Win32 API call. Enables or disables a specific privilege for the current process. Returns a true value if successful and a false value [and sets C<$^E>] on failure. This routine does not provide a way to tell if a privilege is current enabled. C<$sPrivname> is a Win32 privilege name [see the C macros of F]. For example, C<"SeBackupPrivilege"> [a.k.a. C] controls whether you can use C and C<"SeRestorePrivilege"> [a.k.a. C] controls whether you can use C. If C<$bEnable> is true, then C tries to enable the privilege. Otherwise it tries to disable the privilege. =item AbortSystemShutdown( $sComputerName ) Tries to abort a remote shutdown request previously made via C. =item InitiateSystemShutdown( $sComputer, $sMessage, $iTimeoutSecs, $bForce, $bReboot ) Requests that a [remote] computer be shutdown or rebooted. C<$sComputer> is the name [or address] of the computer to be shutdown or rebooted. You can use C<[]> [for C] or C<""> to indicate the local computer. C<$sMessage> is the message to be displayed in a pop-up window on the desktop of the computer to be shutdown or rebooted until the timeout expires or the shutdown is aborted via C. With C<$iTimeoutSecs == 0>, the message will never be visible. C<$iTimeoutSecs> is the number of seconds to wait before starting the shutdown. If C<$bForce> is false, then any applications running on the remote computer get a chance to prompt the remote user whether they want to save changes. Also, for any applications that do not exit quickly enough, the operating system will prompt the user whether they wish to wait longer for the application to exit or force it to exit now. At any of these prompts the user can press B to abort the shutdown but if no applications have unsaved data, they will likely all exit quickly and the shutdown will progress with the remote user having no option to cancel the shutdown. If C<$bForce> is true, all applications are told to exit immediately and so will not prompt the user even if there is unsaved data. Any applications that take too long to exit will be forcibly killed after a short time. The only way to abort the shutdown is to call C before the timeout expires and there is no way to abort the shutdown once it has begun. If C<$bReboot> is true, the computer will automatically reboot once the shutdown is complete. If C<$bReboot> is false, then when the shutdown is complete the computer will halt at a screen indicating that the shutdown is complete and offering a way for the user to start to boot the computer. You must have the C<"SeRemoteShutdownPrivilege"> privilege on the remote computer for this call to succeed. If shutting down the local computer, then the calling process must have the C<"SeShutdownPrivilege"> privilege and have it enabled. =item RegCloseKey( $hKey ) Closes the handle to a Registry key returned by C, C, C, or a few other routines. =item RegConnectRegistry( $sComputer, $hKey, $phKey ) Connects to one of the root Registry keys of a remote computer. C<$sComputer> is the name [or address] of a remote computer you whose Registry you wish to access. C<$hKey> must be either C or C and specifies which root Registry key on the remote computer you wish to have access to. C<$phKey> will be set to the handle to be used to access the remote Registry key. =item RegCreateKey( $hKey, $sSubKey, $phKey ) This routine is meant only for compatibility with Windows version 3.1. Use C instead. =item RegCreateKeyEx( $hKey, $sSubKey, $iZero, $sClass, $iOpts, $iAccess, $pSecAttr, $phKey, $piDisp ) Creates a new Registry subkey. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$sSubKey> is the name of the new subkey to be created. C<$iZero> is reserved for future use and should always be specified as C<0>. C<$sClass> is a string to be used as the class for the new subkey. We are not aware of any current use for Registry key class information so the empty string, C<"">, should usually be used here. C<$iOpts> is a numeric value containing bits that control options used while creating the new subkey. C is the default. C [which is ignored on Windows 95] means the data stored under this key is not kept in a file and will not be preserved when the system reboots. C [also ignored on Windows 95] means ignore the C<$iAccess> parameter and try to open the new key with the access required to backup or restore the key. C<$iAccess> is a numeric mask of bits specifying what type of access is desired when opening the new subkey. See C. C<$pSecAttr> is a C structure packed into a Perl string which controls whether the returned handle can be inherited by child processes. Normally you would pass C<[]> for this argument to have C passed to the underlying API indicating that the handle cannot be inherited. If not under Windows95, then C<$pSecAttr> also allows you to specify C that controls which users will have what type of access to the new key -- otherwise the new key inherits its security from its parent key. C<$phKey> will be set to the handle to be used to access the new subkey. C<$piDisp> will be set to either C or C to indicate for which reason the call succeeded. Can be specified as C<[]> if you don't care. If C<$phKey> and C<$piDisp> start out is integers, then they will probably remain unchanged if the call fails. =item RegDeleteKey( $hKey, $sSubKey ) Deletes a subkey of an open Registry key provided that the subkey contains no subkeys of its own [but the subkey may contain values]. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$sSubKey> is the name of the subkey to be deleted. =item RegDeleteValue( $hKey, $sValueName ) Deletes a values from an open Registry key provided. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$sValueKey> is the name of the value to be deleted. =item RegEnumKey( $hKey, $iIndex, $sName, $lNameSize ) This routine is meant only for compatibility with Windows version 3.1. Use C instead. =item RegEnumKeyEx( $hKey, $iIndex, $sName, $plName, $pNull, $sClass, $plClass, $pftLastWrite ) Lets you enumerate the names of all of the subkeys directly under an open Registry key. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$iIndex> is the sequence number of the immediate subkey that you want information on. Start with this value as C<0> then repeat the call incrementing this value each time until the call fails with C. C<$sName> will be set to the name of the subkey. Can be C<[]> if you don't care about the name. C<$plName> initially specifies the [minimum] buffer size to be allocated for C<$sName>. Will be set to the length of the subkey name if the requested subkey exists even if C<$sName> isn't successfully set to the subkey name. See L for more information. C<$pNull> is reserved for future used and should be passed as C<[]>. C<$sClass> will be set to the class name for the subkey. Can be C<[]> if you don't care about the class. C<$plClass> initially specifies the [minimum] buffer size to be allocated for C<$sClass> and will be set to the length of the subkey class name if the requested subkey exists. See L for more information. C<$pftLastWrite> will be set to a C structure packed into a Perl string and indicating when the subkey was last changed. Can be C<[]>. You may omit both C<$plName> and C<$plClass> to get the same effect as passing in C<[]> for each of them. =item RegEnumValue( $hKey, $iIndex, $sValName, $plValName, $pNull, $piType, $pValData, $plValData ) Lets you enumerate the names of all of the values contained in an open Registry key. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$iIndex> is the sequence number of the value that you want information on. Start with this value as C<0> then repeat the call incrementing this value each time until the call fails with C. C<$sValName> will be set to the name of the value. Can be C<[]> if you don't care about the name. C<$plValName> initially specifies the [minimum] buffer size to be allocated for C<$sValName>. Will be set to the length of the value name if the requested value exists even if C<$sValName> isn't successfully set to the value name. See L for more information. C<$pNull> is reserved for future used and should be passed as C<[]>. C<$piType> will be set to the type of data stored in the value data. If the call succeeds, it will be set to a C value unless passed in as C<[]>. C<$pValData> will be set to the data [packed into a Perl string] that is stored in the requested value. Can be C<[]> if you don't care about the value data. C<$plValData> initially specifies the [minimum] buffer size to be allocated for C<$sValData> and will be set to the length of the value data if the requested value exists. See L for more information. You may omit both C<$plValName> and C<$plValData> to get the same effect as passing in C<[]> for each of them. =item RegFlushKey( $hKey ) Forces that data stored under an open Registry key to be flushed to the disk file where the data is preserved between reboots. Forced flushing is not guaranteed to be efficient so this routine should almost never be called. C<$hKey> is the handle to a Registry key [either C or from a previous call]. =item RegGetKeySecurity( $hKey, $iSecInfo, $pSecDesc, $plSecDesc ) Retrieves one of the C structures describing part of the security for an open Registry key. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$iSecInfo> is a numeric C value that specifies which C structure to retrieve. Should be C, C, C, or C. C<$pSecDesc> will be set to the requested C structure [packed into a Perl string]. C<$plSecDesc> initially specifies the [minimum] buffer size to be allocated for C<$sSecDesc> and will be set to the length of the security descriptor. See L for more information. You may omit this parameter to get the same effect as passing in C<[]> for it. =item RegLoadKey( $hKey, $sSubKey, $sFileName ) Loads a hive file. That is, it creates a new subkey in the Registry and associates that subkey with a disk file that contains a Registry hive so that the new subkey can be used to access the keys and values stored in that hive. Hives are usually created via C. C<$hKey> is the handle to a Registry key that can have hives loaded to it. This must be C, C, or a remote version of one of these from a call to C. C<$sSubKey> is the name of the new subkey to created and associated with the hive file. C<$sFileName> is the name of the hive file to be loaded. This file name is interpretted relative to the C<%SystemRoot%/System32/config> directory on the computer where the C<$hKey> key resides. Loading of hive files located on network shares may fail or corrupt the hive and so should not be attempted. =item RegNotifyChangeKeyValue( $hKey, $bWatchSubtree, $iNotifyFilter, $hEvent, $bAsync ) Arranges for your process to be notified when part of the Registry is changed. C<$hKey> is the handle to a Registry key [either C or from a previous call] for which you wish to be notified when any changes are made to it. If C<$bWatchSubtree> is true, then changes to any subkey or descendant of C<$hKey> are also reported. C<$iNotifyFilter> controllers what types of changes are reported. It is a numeric value containing one or more of the following bit masks: =over =item REG_NOTIFY_CHANGE_NAME Notify if a subkey is added or deleted to a monitored key. =item REG_NOTIFY_CHANGE_LAST_SET Notify if a value in a monitored key is added, deleted, or modified. =item REG_NOTIFY_CHANGE_SECURITY Notify a security descriptor of a monitored key is changed. =item REG_NOTIFY_CHANGE_ATTRIBUTES Notify if any attributes of a monitored key are changed [class name or security descriptors]. =back C<$hEvent> is ignored unless C<$bAsync> is true. Otherwise, C<$hEvent> is a handle to a Win32 I that will be signaled when changes are to be reported. If C<$bAsync> is true, then C returns immediately and uses C<$hEvent> to notify your process of changes. If C<$bAsync> is false, then C does not return until there is a change to be notified of. This routine does not work with Registry keys on remote computers. =item RegOpenKey( $hKey, $sSubKey, $phKey ) This routine is meant only for compatibility with Windows version 3.1. Use C instead. =item RegOpenKeyEx( $hKey, $sSubKey, $iOptions, $iAccess, $phKey ) Opens an existing Registry key. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$sSubKey> is the name of an existing subkey to be opened. Can be C<""> or C<[]> to open an additional handle to the key specified by C<$hKey>. C<$iOptions> is a numeric value containing bits that control options used while open the subkey. There are currently no supported options so this parameters should be specified as C<0>. C<$iAccess> is a numeric mask of bits specifying what type of access is desired when opening the new subkey. Should be a combination of one or more of the following bit masks: =over =item KEY_ALL_ACCESS KEY_READ | KEY_WRITE | KEY_CREATE_LINK =item KEY_READ KEY_QUERY_VALUE | KEY_ENUMERATE_SUBKEYS | KEY_NOTIFY | STANDARD_RIGHTS_READ =item KEY_WRITE KEY_SET_VALUE | KEY_CREATE_SUB_KEY | STANDARD_RIGHTS_WRITE =item KEY_QUERY_VALUE =item KEY_SET_VALUE =item KEY_ENUMERATE_SUB_KEYS =item KEY_CREATE_SUB_KEY =item KEY_NOTIFY =item KEY_EXECUTE Same as C. =item KEY_CREATE_LINK Allows you to create a symbolic link like C and C if the method for doing so were documented. =back C<$phKey> will be set to the handle to be used to access the new subkey. =item RegQueryInfoKey( $hKey, $sClass, $plClass, $pNull, $pcSubKeys, $plSubKey, $plSubClass, $pcValues, $plValName, $plValData, $plSecDesc, $pftTime ) Gets miscellaneous information about an open Registry key. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$sClass> will be set to the class name for the key. Can be C<[]> if you don't care about the class. C<$plClass> initially specifies the [minimum] buffer size to be allocated for C<$sClass> and will be set to the length of the key's class name. See L for more information. You may omit this parameter to get the same effect as passing in C<[]> for it. C<$pNull> is reserved for future used and should be passed as C<[]>. C<$pcSubKeys> will be set to the count of the number of subkeys directly under this key. Can be C<[]>. C<$plSubKey> will be set to the length of the longest subkey name. Can be C<[]>. C<$plSubClass> will be set to the length of the longest class name used with an immediate subkey of this key. Can be C<[]>. C<$pcValues> will be set to the count of the number of values in this key. Can be C<[]>. C<$plValName> will be set to the length of the longest value name in this key. Can be C<[]>. C<$plValData> will be set to the length of the longest value data in this key. Can be C<[]>. C<$plSecDesc> will be set to the length of this key's [longest?] security descriptor. C<$pftTime> will be set to a C structure packed into a Perl string and indicating when this key was last changed. Can be C<[]>. =item RegQueryMultipleValues( $hKey, $pValueEnts, $cValueEnts, $pBuffer, $plBuffer ) Allows you to use a single call to query several values from a single open Registry key to maximize efficiency. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$pValueEnts> should contain a list of C structures packed into a single Perl string. Each C structure should have the C entry pointing to a string containing the name of a value stored in this key. The remaining fields are set if the function succeeds. C<$cValueEnts> should contain the count of the number of C structures contained in C<$pValueEnts>. C<$pBuffer> will be set to the data from all of the requested values concatenated into a single Perl string. C<$plBuffer> initially specifies the [minimum] buffer size to be allocated for C<$sBuffer> and will be set to the total length of the data to be written to C<$sBuffer>. See L for more information. You may omit this parameter to get the same effect as passing in C<[]> for it. Here is sample code to populate C<$pValueEnts>: $cValueEnts= @ValueNames; $pValueEnts= pack( " p x4 x4 x4 " x $cValueEnts, @ValueNames ); Here is sample code to retrieve the data type and data length returned in C<$pValueEnts>: @Lengths= unpack( " x4 L x4 x4 " x $cValueEnts, $pValueEnts ); @Types= unpack( " x4 x4 x4 L " x $cValueEnts, $pValueEnts ); Given the above, and assuming you haven't modified C<$sBuffer> since the call, you can also extract the value data strings from C<$sBuffer> by using the pointers returned in C<$pValueEnts>: @Data= unpack( join( "", map(" x4 x4 P$_ x4 ",@Lengths) ), $pValueEnts ); Much better is to use the lengths and extract directly from C<$sBuffer> using C [or C]: @Data= unpack( join("",map("P$_",@Lengths)), $sBuffer ); =item RegQueryValue( $hKey, $sSubKey, $sValueData, $plValueData ) This routine is meant only for compatibility with Windows version 3.1. Use C instead. This routine can only query unamed values (a.k.a. "default values"). =item RegQueryValueEx( $hKey, $sValueName, $pNull, $piType, $pValueData, $plValueData ) Lets you look up value data using the name of the value stored in an open Registry key. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$sValueName> is the name of the value whose data you wish to retrieve. C<$pNull> this parameter is reserved for future use and should be specified as C<[]>. C<$piType> will be set to indicate what type of data is stored in the named value. Will be set to a C value if the function succeeds. C<$pValueData> will be set to the value data [packed into a Perl string] that is stored in the named value. Can be C<[]> if you don't care about the value data. C<$plValueData> initially specifies the [minimum] buffer size to be allocated for C<$sValueData> and will be set to the size [always in bytes] of the data to be written to C<$sValueData>. See L for more information. =item RegReplaceKey( $hKey, $sSubKey, $sNewFile, $sOldFile ) Lets you replace an entire hive when the system is next booted. C<$hKey> is the handle to a Registry key that has hives loaded in it. This must be C, C, or a remote version of one of these from a call to C. C<$sSubKey> is the name of the subkey of C<$hKey> whose hive you wish to have replaced on the next reboot. C<$sNewFile> is the name of a file that will replace the existing hive file when the system reboots. C<$sOldFile> is the file name to save the current hive file to when the system reboots. =item RegRestoreKey( $hKey, $sFileName, $iFlags ) Reads in a hive file and copies its contents over an existing Registry tree. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$sFileName> is the name of the hive file to be read. For each value and subkey in this file, a value or subkey will be added or replaced in C<$hKey>. C<$iFlags> is usally C<0>. It can also be C which, rather than copying the hive over the existing key, replaces the existing key with a temporary, memory-only Registry key and then copies the hive contents into it. This option only works if C<$hKey> is C, C, or a remote version of one of these from a call to C. =item RegSaveKey( $hKey, $sFileName, $pSecAttr ) Dumps any open Registry key and all of its subkeys and values into a new hive file. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$sFileName> is the name of the file that the Registry tree should be saved to. It is interpretted relative to the C<%SystemRoot%/System32/config> directory on the computer where the C<$hKey> key resides. C<$pSecAttr> contains a C structure that specifies the permissions to be set on the new file that is created. This can be C<[]>. =item RegSetKeySecurity( $hKey, $iSecInfo, $pSecDesc ) Sets one of the C structures describing part of the security for an open Registry key. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$iSecInfo> is a numeric C value that specifies which C structure to set. Should be C, C, C, or C. C<$pSecDesc> contains the new C structure packed into a Perl string. =item RegSetValue( $hKey, $sSubKey, $iType, $sValueData, $lValueData ) This routine is meant only for compatibility with Windows version 3.1. Use C instead. This routine can only set unamed values (a.k.a. "default values"). =item RegSetValueEx( $hKey, $sValueName, $iZero, $iType, $pValueData, $lValueData ) Sets a value. C<$hKey> is the handle to a Registry key [either C or from a previous call]. C<$sValueName> is the name of the value to be set. C<$iZero> is reserved for future use and should be specified as C<0>. C<$iType> is the type of data stored in C<$pValueData>. It should be a C value. C<$pValueData> is the value data packed into a Perl string. C<$lValueData> the length of the value data that is stored in C<$pValueData>. You will usually omit this parameter or pass in C<0> to have C used. In both of these cases, if C<$iType> is C or C, C will append a trailing C<'\0'> to the end of C<$pValueData> [unless there is already one]. =item RegUnLoadKey( $hKey, $sSubKey ) Unloads a previously loaded hive file. That is, closes the hive file then deletes the subkey that was providing access to it. C<$hKey> is the handle to a Registry key that has hives loaded in it. This must be C, C, or a remote version of one of these from a call to C. C<$sSubKey> is the name of the subkey whose hive you wish to have unloaded. =item :FuncA The ASCI-specific function names. Each of these is identical to version listed above without the trailing "A": AbortSystemShutdownA InitiateSystemShutdownA RegConnectRegistryA RegCreateKeyA RegCreateKeyExA RegDeleteKeyA RegDeleteValueA RegEnumKeyA RegEnumKeyExA RegEnumValueA RegLoadKeyA RegOpenKeyA RegOpenKeyExA RegQueryInfoKeyA RegQueryMultipleValuesA RegQueryValueA RegQueryValueExA RegReplaceKeyA RegRestoreKeyA RegSaveKeyA RegSetValueA RegSetValueExA RegUnLoadKeyA =item :FuncW The UNICODE-specific function names. These are the same as the version listed above without the trailing "W" except that string parameters are UNICODE strings rather than ASCII strings, as indicated. =item AbortSystemShutdownW( $sComputerName ) C<$sComputerName> is UNICODE. =item InitiateSystemShutdownW( $sComputer, $sMessage, $iTimeoutSecs, $bForce, $bReboot ) C<$sComputer> is UNICODE. =item RegConnectRegistryW( $sComputer, $hKey, $phKey ) C<$sComputer> is UNICODE. =item RegCreateKeyW( $hKey, $sSubKey, $phKey ) C<$sSubKey> is UNICODE. =item RegCreateKeyExW( $hKey, $sSubKey, $iZero, $sClass, $iOpts, $iAccess, $pSecAttr, $phKey, $piDisp ) C<$sSubKey> and C<$sClass> are UNICODE. =item RegDeleteKeyW( $hKey, $sSubKey ) C<$sSubKey> is UNICODE. =item RegDeleteValueW( $hKey, $sValueName ) C<$sValueName> is UNICODE. =item RegEnumKeyW( $hKey, $iIndex, $sName, $lwNameSize ) C<$sName> is UNICODE and C<$lwNameSize> is measured as number of Cs. =item RegEnumKeyExW( $hKey, $iIndex, $sName, $plwName, $pNull, $sClass, $plwClass, $pftLastWrite ) C<$sName> and C<$sClass> are UNICODE and C<$plwName> and C<$plwClass> are measured as number of Cs. =item RegEnumValueW( $hKey, $iIndex, $sValName, $plwValName, $pNull, $piType, $pValData, $plValData ) C<$sValName> is UNICODE and C<$plwValName> is measured as number of Cs. C<$sValData> is UNICODE if C<$piType> is C, C, or C. Note that C<$plValData> is measured as number of bytes even in these cases. =item RegLoadKeyW( $hKey, $sSubKey, $sFileName ) C<$sSubKey> and C<$sFileName> are UNICODE. =item RegOpenKeyW( $hKey, $sSubKey, $phKey ) C<$sSubKey> is UNICODE. =item RegOpenKeyExW( $hKey, $sSubKey, $iOptions, $iAccess, $phKey ) C<$sSubKey> is UNICODE. =item RegQueryInfoKeyW( $hKey, $sClass, $plwClass, $pNull, $pcSubKeys, $plwSubKey, $plwSubClass, $pcValues, $plwValName, $plValData, $plSecDesc, $pftTime ) C<$sClass> is UNICODE. C<$plwClass>, C<$plwSubKey>, C<$plwSubClass>, and C<$plwValName> are measured as number of Cs. Note that C<$plValData> is measured as number of bytes. =item RegQueryMultipleValuesW( $hKey, $pValueEnts, $cValueEnts, $pBuffer, $plBuffer ) The C fields of the C structures in C<$pValueEnts> are UNICODE. Values of type C, C, and C are written to C<$pBuffer> in UNICODE. Note that C<$plBuffer> and the C fields of the C structures are measured as number of bytes. =item RegQueryValueW( $hKey, $sSubKey, $sValueData, $plValueData ) C<$sSubKey> and C<$sValueData> is UNICODE. Note that C<$plValueData> is measured as number of bytes. =item RegQueryValueExW( $hKey, $sValueName, $pNull, $piType, $pValueData, $plValueData ) C<$sValueName> is UNICODE. C<$sValueData> is UNICODE if C<$piType> is C, C, or C. Note that C<$plValueData> is measured as number of bytes even in these cases. =item RegReplaceKeyW( $hKey, $sSubKey, $sNewFile, $sOldFile ) C<$sSubKey>, C<$sNewFile>, and C<$sOldFile> are UNICODE. =item RegRestoreKeyW( $hKey, $sFileName, $iFlags ) C<$sFileName> is UNICODE. =item RegSaveKeyW( $hKey, $sFileName, $pSecAttr ) C<$sFileName> is UNICODE. =item RegSetValueW( $hKey, $sSubKey, $iType, $sValueData, $lValueData ) C<$sSubKey> and C<$sValueData> is UNICODE. Note that C<$lValueData> is measured as number of bytes. =item RegSetValueExW( $hKey, $sValueName, $iZero, $iType, $pValueData, $lValueData ) C<$sValueName> is UNICODE. C<$sValueData> is UNICODE if C<$iType> is C, C, or C. Note that C<$lValueData> is measured as number of bytes even in these cases. =item RegUnLoadKeyW( $hKey, $sSubKey ) C<$sSubKey> is UNICODE. =item :HKEY_ All C constants: HKEY_CLASSES_ROOT HKEY_CURRENT_CONFIG HKEY_CURRENT_USER HKEY_DYN_DATA HKEY_LOCAL_MACHINE HKEY_PERFORMANCE_DATA HKEY_USERS =item :KEY_ All C constants: KEY_QUERY_VALUE KEY_SET_VALUE KEY_CREATE_SUB_KEY KEY_ENUMERATE_SUB_KEYS KEY_NOTIFY KEY_CREATE_LINK KEY_READ KEY_WRITE KEY_EXECUTE KEY_ALL_ACCESS =item :REG_ All C constants: REG_OPTION_RESERVED REG_OPTION_NON_VOLATILE REG_OPTION_VOLATILE REG_OPTION_CREATE_LINK REG_OPTION_BACKUP_RESTORE REG_OPTION_OPEN_LINK REG_LEGAL_OPTION REG_CREATED_NEW_KEY REG_OPENED_EXISTING_KEY REG_WHOLE_HIVE_VOLATILE REG_REFRESH_HIVE REG_NO_LAZY_FLUSH REG_NOTIFY_CHANGE_ATTRIBUTES REG_NOTIFY_CHANGE_NAME REG_NOTIFY_CHANGE_LAST_SET REG_NOTIFY_CHANGE_SECURITY REG_LEGAL_CHANGE_FILTER REG_NONE REG_SZ REG_EXPAND_SZ REG_BINARY REG_DWORD REG_DWORD_LITTLE_ENDIAN REG_DWORD_BIG_ENDIAN REG_LINK REG_MULTI_SZ REG_RESOURCE_LIST REG_FULL_RESOURCE_DESCRIPTOR REG_RESOURCE_REQUIREMENTS_LIST =item :ALL All of the above. =back =head1 BUGS The ActiveState ports of Perl for Win32 [but not the ActiveState bundles of standard Perl 5.004 and beyond] do not support the tools for building extensions and so do not support this extension. No routines are provided for using the data returned in the C buffers. Those will be in C when it becomes available. No routines are provided for dealing with UNICODE data effectively. Such are available elsewhere. Parts of the module test will fail if used on a version of Perl that does not yet set C<$^E> based on C. On NT 4.0 (at least), the RegEnum* calls do not set the required buffer sizes when returning C so this module will not grow the buffers in such cases. C overcomes this by using values from C for buffer sizes in RegEnum* calls. On NT 4.0 (at least), C on C never succeeds. Also, C on C never returns the required buffer size. To access C you will need to keep growing the data buffer until the call succeeds. Because C seems to be buggy under Win32, it is not used in the stubs in F. Using C as an argument to any of the stubs in F may cause warnings when the C is then passed to the function from F that does the real work. =head1 AUTHOR Tye McQueen, tye@metronet.com, http://www.metronet.com/~tye/. =head1 SEE ALSO =over =item L =item L =back =cut