[Identification]
    OptionType = NetTransport

[LanguagesSupported]
    ENG

[Options]
    atmarpc

[OptionsTextENG]
    atmarpc     = "IP over ATM (RFC 1577) Client"

[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "transport"
TSoftwareType   = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"

Manufacturer    = "Microsoft"
ProductMajorVersion     = "1"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
TProductMajorVersion     = "1"
TProductMinorVersion     = "0"
TProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

ProductSoftwareName      = "atmarpc"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\atmarpc.sys"
TProductSoftwareName      = "ipatmarp"
TProductSoftwareImagePath = "\SystemRoot\System32\drivers\ipatmarp.sys"

ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
TProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(TProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductSoftwareName)"\Parameters"
ServiceKeyName  = $(!NTN_ServiceBase)"\"$(ProductSoftwareName)
TServiceKeyName  = $(!NTN_ServiceBase)"\"$(TProductSoftwareName)

LinkageKeyName = $(!NTN_ServiceBase)"\"$(ProductSoftwareName)"\Linkage"
TLinkageKeyName = $(!NTN_ServiceBase)"\"$(TProductSoftwareName)"\Linkage"

ProductRegBase = "SOFTWARE\Microsoft\atmarpc\CurrentVersion"
TProductRegBase = "SOFTWARE\Microsoft\ipatmarp\CurrentVersion"

; type = Name,Class
NetRuleSoftwareType      = "atmarpc ipatmclient"
TNetRuleSoftwareType      = "ipatmarpsys atmvirtualdriver ipatmarpdriver"

; Class = new class name {existing class name | basic no|yes }
NetRuleSoftwareClass     = {"ipatmclient basic"}
TNetRuleSoftwareClass     = {"ipatmarpdriver basic", "atmvirtualdriver basic"}

; Use = Service | Transport | driver | adapter, yes|no, yes|no
NetRuleSoftwareUse       = $(SoftwareType)" no yes"
TNetRuleSoftwareUse       = $(TSoftwareType)

; BindForm = ObjectName yes|no yes|no container|simple|stream

NetRuleSoftwareBindForm  = """atmarpc"" yes no container"
TNetRuleSoftwareBindForm  = """ipatmarpsys"" yes no container"

TNetRuleSoftwareBindable = {"ipatmarpdriver AtmArpVirtualAdapter non exclusive 100",+
						   "tcpipTransport atmvirtualdriver non non 100",+
                           "netbtTransport atmvirtualdriver non non 100"}

TcpipLLInterface        = "AtmArpC"
TpcipUseZeroBroadcast   = 0

[HardwareConstants]
ProductHardwareName    = "ipatmarp"
ProductHardwareTitle   = "Virtual ATMARP Interface Adapter"
ProductHardwareDescription = "ATMARP Interface Adapter"
NetRuleHardwareType     = "ipatmarp AtmArpVirtualAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"AtmArpVirtualAdapter basic"}


[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[platform]
    STF_PLATFORM = "" ? $(!LIBHANDLE) GetPlatform

[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        goto returnoptions
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
    set !DebugOutputControl = 1
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
	Debug-Output "ATMARPC: NTN_REGBASE is "$(!NTN_RegBase)
    Debug-Output "ATMARPC: Arg 1"$($1)
    Debug-Output "ATMARPC: Arg 2"$($2)
    Debug-Output "ATMARPC: Arg 3"$($3)
    Debug-Output "ATMARPC: Arg 4"$($4)
    Debug-Output "ATMARPC: Arg 5"$($5)
    Debug-Output "ATMARPC: Arg 6"$($6)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    Debug-Output "ATMARPC: STF_CWDDIR is: "$(!STF_CWDDIR)
    Debug-Output "ATMARPC: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms HardwareConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    detect platform
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
	Debug-Output "ATMARPC: Install mode "$(!NTN_InstallMode)
	Debug-Output "ATMARPC: Registry base "$(!NTN_RegBase)

    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
;        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
;        ifint $($ShellCode) != $(!SHELL_CODE_OK)
;            Debug-Output "ATMARPC: ShellCode error: cannot get an error string."
;            goto ShellCodeError
;        endif
;        set Error = $($R0)
;        set from = end
;        set to = end
;        goto nonfatalinfo
         Goto successful
    else
        set StartLabel = installadapter
    endif
    set RadioDefault = 2
    set RadioIn = {$(RadioDefault)}
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +
    Debug-Output "ATMARPC: Installadapter"
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
            $(ProductVersion)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ATMARPC: ShellCode error: cannot get an error string."
            goto ShellCodeError
        endif
        goto end
    endif
    CloseRegKey $(KeyProduct)
    goto installproduct


installproduct = +
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
        Ifstr(i) $(DoCopy) == "YES"
           Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
           Ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Goto ShellCodeError
           Else-Ifstr(i) $($R0) == STATUS_FAILED
               Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                   goto ShellCodeError
               endif
               Goto fatal
           Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
           Endif
           Set SrcDir = $($R1)
        Endif
        Shell "" StripTrailSlash $(SrcDir)
        set PlatformDir  = $($R0)"\"$(STF_PLATFORM)
        set InfDir  = $($R0)"\"
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           set Error = $($R0)
           goto fatal
        endif
        set OEM_ABANDON_ON = TRUE
        Debug-Output "ATMARPC: AddSoftwareing "$(ProductSoftwareName)" now"
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareDisplayName), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "PNP_TDI", {}, "",+
            $(NetEventDLL)
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) !=  NO_ERROR
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            Debug-Output "ATMARPC: ** Failed to Add myself -- 1"
            goto fatalRegistry
        endif
        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {Review,$(NoTitle),$(!REG_VT_DWORD),1},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        set RegistryErrorIndex = $($R0)
        Ifstr $(RegistryErrorIndex) != NO_ERROR
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalRegistry
        endif

; Setup the bindings net rules

        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)}, +
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)

        set RegistryErrorIndex = $($R0)
        Ifstr $(RegistryErrorIndex) != NO_ERROR
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalRegistry
        endif

        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)

; Dummy driver now
        set OEM_ABANDON_ON = TRUE
        Debug-Output "ATMARPC: AddSoftwareing "$(TProductSoftwareName)" now"
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(TProductSoftwareName), +
            $(TProductSoftwareName), +
            $(TProductSoftwareDisplayName), $(STF_CONTEXTINFNAME), +
            $(TProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) !=  NO_ERROR
            EndWait
            Debug-Output "ATMARPC: ** Failed to Add myself -- 2"
            goto fatalRegistry
        endif
        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)
        Debug-Output "ATMARPC: Bind: SoftProductKey is "$(SoftProductKey)
        Debug-Output "ATMARPC: Bind: SoftNetRuleKey is "$(SoftNetRuleKey)
        Debug-Output "ATMARPC: Bind: SoftServiceKey is "$(SoftServiceKey)
        Debug-Output "ATMARPC: Bind: SoftParameterKey is "$(SoftParameterKey)
        Debug-Output "ATMARPC: Bind: SoftLinkageKey is "$(SoftLinkageKey)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(TSoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(TProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(TProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(TProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(TProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(TProductSoftwareName)},+
                           {Review,$(NoTitle),$(!REG_VT_DWORD),1},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        set RegistryErrorIndex = $($R0)
        Ifstr $(RegistryErrorIndex) != NO_ERROR
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalRegistry
        endif

; Setup the bindings net rules

        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(TNetRuleSoftwareType)}, +
                            {use,$(NoTitle),$(!REG_VT_SZ),$(TNetRuleSoftwareUse)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(TNetRuleSoftwareClass)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(TNetRuleSoftwareBindForm)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(TNetRuleSoftwareBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)

        set RegistryErrorIndex = $($R0)
        Ifstr $(RegistryErrorIndex) != NO_ERROR
            Debug-Output "ATMARPC: failed to add netrules for dummy driver"
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalRegistry
        endif


        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)

    endif
    goto successful

bindingadapter =+

;	Trying to avoid "cannot start service" for dummy driver by setting its
;	Start type to "Manual" rather than "Automatic"
;
        Debug-Output "ATMARPC: Updating Start value to 3 for "$(TServiceKeyName)
        OpenRegKey $(!REG_H_LOCAL) "" $(TServiceKeyName) $(MAXIMUM_ALLOWED) TServiceKey
        ifstr(i) $(TServiceKey) != ""
	        set ModuleStartValue = 3
			set NewValueList = {{Start,$(NoTitle),$(!REG_VT_DWORD),$(ModuleStartValue)}}
			Shell $(UtilityInf), AddValueList, $(TServiceKey), $(NewValueList)
            Debug-Output "Set start value to 3 under "$(TServiceKeyName)
            CloseRegKey $(TServiceKey)
        endif


	ifstr(i) $(!NTN_RegBase) == $(ProductRegBase)
		Debug-Output "ATMARPC: Binding Adapter, LinkageKeyName "$(LinkageKeyName)
	
		OpenRegKey $(!REG_H_LOCAL) "" $(LinkageKeyName) $(MAXIMUM_ALLOWED) LinkageKey
		ifstr(i) $(LinkageKey) != ""
			GetRegValue $(LinkageKey) "Bind" BindList
			Debug-Output "BindList: "$(BindList)
			Set Binding = *($(BindList),4)
			Debug-Output "Binding:  "$(Binding)
			CloseRegKey $(LinkageKey)
		else
			Debug-Output "failed to open linkage for adapter"
			goto fatalregistry
		endif
	
		set CardList = {}
		set CreateCardList = {}
		ForListDo $(Binding)
			Split-String $($), "\", BindInfo
			QueryListSize BindListSize $(BindInfo)
			set CardName = *($(BindInfo),$(BindListSize))
			Debug-Output "Cardname: "$(CardName)
			ifstr(i) $(CardList) == {}
				set CardList = {$(CardName)}
			else
				set CardList = >($(CardList),$(CardName))
			endif
		EndForListDo
	

		Set AddedNewVirtualAdapter = "No"
		Debug-Output "Cardlist: "$(CardList)
		ForListDo $(CardList)
;
;  For each real adapter we are bound to, we create a Logical IP Subnet (LIS).
;  As of now, we create exactly ONE LIS, LIS0. For each LIS created, we
;  AddHardwareComponent a dummy adapter, which is bindable to TCP/IP etc.
;
			Debug-Output "Will create LIS0 for "$($)
			Set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\AtmArpC"
			Debug-Output "about to open "$(RegKey)
			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) ArpParamsKey
			ifstr(i) $(ArpParamsKey) == ""
				Debug-Output "creating ArpParamsKey key under the adapter"
				CreateRegKey $(!REG_H_LOCAL) {$(RegKey),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ArpParamsKey
			else
				Debug-Output "ATMARPC: Have processed "$($)" already"
				CloseRegKey $(ArpParamsKey)
				goto continueCardList
			endif
			ifstr(i) $(ArpParamsKey) == ""
				Debug-Output "Failed to open/create the ArpParamsKey key under the adapter"
				goto fatalRegistry
			endif

			Set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\atmarpc\LIS0"
			Debug-Output "about to open "$(RegKey)
			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) LISKey
			ifstr(i) $(LISKey) == ""
				Debug-Output "creating LIS0 key under the adapter"
				CreateRegKey $(!REG_H_LOCAL) {$(RegKey),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" LISKey
			endif

			set DefaultSapSelector = 1
			set DefaultPVCOnly = 0
;
;	All timeouts and intervals are in terms of seconds.
;
			set DefaultServerConnectInterval = 5
			set DefaultServerRegistrationTimeout = 3
			set DefaultAddressResolutionTimeout = 3
			set DefaultARPEntryAgingTimeout = 900
			set DefaultInARPWaitTimeout = 5
			set DefaultServerRefreshTimeout = 900
			set DefaultMinWaitAfterNak = 10
			set DefaultMaxRegistrationAttempts = 5
			set DefaultMaxResolutionAttempts = 4
;
;	Bandwidth is in bytes/sec
;
			set DefaultSendBandwidth = 50000
			set DefaultRecvBandwidth = 50000
			set DefaultSendMaxSize = 65535
			set DefaultRecvMaxSize = 65535

;   Default MTU size, in bytes. This is what is reported to the IP layer.
;   If this value isn't present, the ATMARP Client will use the value of
;   Max AAL5 packet size supported by the miniport as the MTU.
			set DefaultMTUSize = 9180

;
;	FlowInfoEnabled is set to 1 if we want the ATMARP Client to look below the
;	FlowInfo subkey for information about configured flows. If FlowInfoEnabled
;	is set to 0, the client will ignore all configured flow info.
;
			set DefaultFlowInfoEnabled = 0

			set NewValueList = {{SapSelector,$(NoTitle),$(!REG_VT_DWORD),$(DefaultSapSelector)},+
						{ServerConnectInterval,$(NoTitle),$(!REG_VT_DWORD),$(DefaultServerConnectInterval)},+
						{ServerRegistrationTimeout,$(NoTitle),$(!REG_VT_DWORD),$(DefaultServerRegistrationTimeout)},+
						{AddressResolutionTimeout,$(NoTitle),$(!REG_VT_DWORD),$(DefaultAddressResolutionTimeout)},+
						{ARPEntryAgingTimeout,$(NoTitle),$(!REG_VT_DWORD),$(DefaultARPEntryAgingTimeout)},+
						{InARPWaitTimeout,$(NoTitle),$(!REG_VT_DWORD),$(DefaultInARPWaitTimeout)},+
						{ServerRefreshTimeout,$(NoTitle),$(!REG_VT_DWORD),$(DefaultServerRefreshTimeout)},+
						{MinWaitAfterNak,$(NoTitle),$(!REG_VT_DWORD),$(DefaultMinWaitAfterNak)},+
						{MaxRegistrationAttempts,$(NoTitle),$(!REG_VT_DWORD),$(DefaultMaxRegistrationAttempts)},+
						{MaxResolutionAttempts,$(NoTitle),$(!REG_VT_DWORD),$(DefaultMaxResolutionAttempts)},+
						{MTU,$(NoTitle),$(!REG_VT_DWORD),$(DefaultMTUSize)},+
						{FlowInfoEnabled,$(NoTitle),$(!REG_VT_DWORD),$(DefaultFlowInfoEnabled)}}
			Shell $(UtilityInf), AddValueList, $(LISKey), $(NewValueList)

;
;	Now create the FlowInfo key. NOTE: To enable all the following, set
;	FlowInfoEnabled, above, to 1.
;
			Set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\atmarpc\LIS0\FlowInfo"
			Debug-Output "about to open "$(RegKey)
			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) FlowInfoKey
			ifstr(i) $(FlowInfoKey) == ""
				Debug-Output "creating LIS0\FlowInfo key under the adapter"
				CreateRegKey $(!REG_H_LOCAL) {$(RegKey),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" FlowInfoKey
			endif
			ifstr(i) $(FlowInfoKey) == ""
				Debug-Output "Failed to create FlowInfo subkey"
				goto fatalRegistry
			endif
;
;	Create High Bandwidth FlowInfo subkey
;
			Set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\atmarpc\LIS0\FlowInfo\HighBw"
			Debug-Output "about to open "$(RegKey)
			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) HighBwKey
			ifstr(i) $(HighBwKey) == ""
				Debug-Output "creating LIS0\FlowInfo\HighBw key under the adapter"
				CreateRegKey $(!REG_H_LOCAL) {$(RegKey),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" HighBwKey
			endif
			ifstr(i) $(HighBwKey) == ""
				Debug-Output "Failed to create HighBw subkey"
				goto fatalRegistry
			endif

;
;	Fill in flow info values for High Bandwidth flows
;

			Set DefaultHighBwPacketSizeLimit = 65536
			Set DefaultHighBwSendBandwidth = 249984
			Set DefaultHighBwRecvBandwidth = 249984
			Set DefaultHighBwGuarantee = 3
			Set DefaultHighBwVcAgingTime = 10
			set NewValueList = {{PacketSizeLimit,$(NoTitle),$(!REG_VT_DWORD),$(DefaultHighBwPacketSizeLimit)},+
						{SendBandwidth,$(NoTitle),$(!REG_VT_DWORD),$(DefaultHighBwSendBandwidth)},+
						{ReceiveBandwidth,$(NoTitle),$(!REG_VT_DWORD),$(DefaultHighBwRecvBandwidth)},+
						{Guarantee,$(NoTitle),$(!REG_VT_DWORD),$(DefaultHighBwGuarantee)},+
						{AgingTime,$(NoTitle),$(!REG_VT_DWORD),$(DefaultHighBwVcAgingTime)}}
			Shell $(UtilityInf), AddValueList, $(HighBwKey), $(NewValueList)

			CloseRegKey $(HighBwKey)
;
;	Create Low Bandwidth FlowInfo subkey
;
			Set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\atmarpc\LIS0\FlowInfo\LowBw"
			Debug-Output "about to open "$(RegKey)
			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) LowBwKey
			ifstr(i) $(LowBwKey) == ""
				Debug-Output "creating LIS0\FlowInfo\LowBw key under the adapter"
				CreateRegKey $(!REG_H_LOCAL) {$(RegKey),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" LowBwKey
			endif
			ifstr(i) $(LowBwKey) == ""
				Debug-Output "Failed to create LowBw subkey"
				goto fatalRegistry
			endif
;
;	Fill in flow info values for Low Bandwidth flows
;
			Set DefaultLowBwPacketSizeLimit = 256
			Set DefaultLowBwSendBandwidth = 6240
			Set DefaultLowBwRecvBandwidth = 6240
			Set DefaultLowBwGuarantee = 0
			Set DefaultLowBwVcAgingTime = 30
			set NewValueList = {{PacketSizeLimit,$(NoTitle),$(!REG_VT_DWORD),$(DefaultLowBwPacketSizeLimit)},+
						{SendBandwidth,$(NoTitle),$(!REG_VT_DWORD),$(DefaultLowBwSendBandwidth)},+
						{ReceiveBandwidth,$(NoTitle),$(!REG_VT_DWORD),$(DefaultLowBwRecvBandwidth)},+
						{Guarantee,$(NoTitle),$(!REG_VT_DWORD),$(DefaultLowBwGuarantee)},+
						{AgingTime,$(NoTitle),$(!REG_VT_DWORD),$(DefaultLowBwVcAgingTime)}}
			Shell $(UtilityInf), AddValueList, $(LowBwKey), $(NewValueList)

			CloseRegKey $(LowBwKey)

;
;	Now create the ARP Server List subkey
;
			Set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\atmarpc\LIS0\ARPServerList"
			Debug-Output "about to open "$(RegKey)
			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) ServerListKey
			ifstr(i) $(ServerListKey) == ""
				Debug-Output "creating LIS0\ARPServerList key under the adapter"
				CreateRegKey $(!REG_H_LOCAL) {$(RegKey),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ServerListKey
			endif
			ifstr(i) $(ServerListKey) == ""
				Debug-Output "Failed to create ARP Server list key"
				goto fatalRegistry
			endif

			set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\atmarpc\LIS0\ARPServerList\Server1"
			Debug-Output "atmarpc: will open/create "$(RegKey)
			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) Server1Key
			ifstr(i) $(Server1Key) == ""
				Debug-Output "creating LIS0\ARPServerList\Server1 key under the adapter"
				CreateRegKey $(!REG_H_LOCAL) {$(RegKey),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" Server1Key
			endif
			ifstr(i) $(Server1Key) == ""
				Debug-Output "Failed to create ARP Server 1 key"
				goto fatalRegistry
			endif

			set ServerAddress1 = "4700918100000000613e5bfe010000d10f9f5e00"
			set NewValueList = {{AtmAddress,$(NoTitle),$(!REG_VT_SZ),$(ServerAddress1)}}
			Shell $(UtilityInf), AddValueList, $(Server1Key), $(NewValueList)
			CloseRegKey $(Server1Key)

;			set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\atmarpc\LIS0\ARPServerList\Server2"
;			Debug-Output "atmarpc: will open/create "$(RegKey)
;			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) Server2Key
;			ifstr(i) $(Server2Key) == ""
;				Debug-Output "creating LIS0\ARPServerList\Server2 key under the adapter"
;				CreateRegKey $(!REG_H_LOCAL) {$(RegKey),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" Server2Key
;			endif
;			ifstr(i) $(Server2Key) == ""
;				Debug-Output "Failed to create ARP Server 2 key"
;				goto fatalRegistry
;			endif

;			set ServerAddress2 = "4700000000003c0000a000000000000000000800"
;			set NewValueList = {{AtmAddress,$(NoTitle),$(!REG_VT_SZ),$(ServerAddress1)}}
;			Shell $(UtilityInf), AddValueList, $(Server2Key), $(NewValueList)
;			CloseRegKey $(Server2Key)

			CloseRegKey $(ServerListKey)

;
;	Now create the MARS Server List subkey
;
			Set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\atmarpc\LIS0\MARSList"
			Debug-Output "about to open "$(RegKey)
			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) ServerListKey
			ifstr(i) $(ServerListKey) == ""
				Debug-Output "creating LIS0\MARSList key under the adapter"
				CreateRegKey $(!REG_H_LOCAL) {$(RegKey),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ServerListKey
			endif
			ifstr(i) $(ServerListKey) == ""
				Debug-Output "Failed to create MARS Server list key"
				goto fatalRegistry
			endif

			set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\atmarpc\LIS0\MARSList\Server1"
			Debug-Output "atmarpc: will open/create "$(RegKey)
			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) Server1Key
			ifstr(i) $(Server1Key) == ""
				Debug-Output "creating LIS0\MARSList\Server1 key under the adapter"
				CreateRegKey $(!REG_H_LOCAL) {$(RegKey),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" Server1Key
			endif
			ifstr(i) $(Server1Key) == ""
				Debug-Output "Failed to create MARS Server 1 key"
				goto fatalRegistry
			endif

			set ServerAddress1 = "4700918100000000613e5bfe010000d10f9f5e00"
			set NewValueList = {{AtmAddress,$(NoTitle),$(!REG_VT_SZ),$(ServerAddress1)}}
			Shell $(UtilityInf), AddValueList, $(Server1Key), $(NewValueList)
			CloseRegKey $(Server1Key)

			CloseRegKey $(ServerListKey)

;
;  Create the virtual adapter now.
;
			Debug-Output "ATMARPC: AddHardwareing ipatmarp now"
			Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(TProductKeyName)
			set RegistryErrorIndex = $($R0)
			Ifstr(i) $(RegistryErrorIndex) !=  NO_ERROR
				EndWait
				Debug-Output "ATMARPC: ** Failed to AddHardware myself"
				goto fatalRegistry
			endif

			set HardNetCardKey      = $($R1)
            set HardNetRuleKey      = $($R2)
            set HardParameterKey    = $($R3)
            set AdapterNumber       = $($R4)
            set LogicalAdapterName  = $($R5)
            Debug-Output "ATMARPC: After AddHw, ServiceName "$($R5)
            Debug-Output "ATMARPC: HardParameterKey "$(HardParameterKey)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
                                {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ATMARPC: AddValueList failed for HardNetCardKey"
                goto ShellCodeError
            endif

            set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
            set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
            Debug-Output "ATMARPC: ProductHardwareName "$(ProductHardwareName)
            Debug-Output "ATMARPC: AdapterNumber "$(AdapterNumber)
            Debug-Output "ATMARPC: TempProdName "$(TempProdName)
            Debug-Output "ATMARPC: TempBindForm "$(TempBindForm)
            Debug-Output "ATMARPC: NetRuleHardwareType "$(NetRuleHardwareType)
            set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                                {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                                {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                                {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
            CloseRegKey $(HardNetCardKey)
            CloseRegKey $(HardNetRuleKey)
            CloseRegKey $(HardParameterKey)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif

			Set AddedNewVirtualAdapter = "Yes"

;
;  Use the Logical Adapter name we got above to create the IP Config
;  string to be used in the IPAddInterface() call. We store this within
;  the LIS configuration.
;
			ifstr(i) $(LISKey) != ""
				set IPConfigString = $(LogicalAdapterName)"\Parameters\Tcpip"
				set NewValueList = {{IPConfig,$(NoTitle),$(!REG_VT_SZ),$(IPConfigString)}}
				Shell $(UtilityInf), AddValueList, $(LISKey), $(NewValueList)
;
; Save Adapter Number in LIS0 for use in RemoveAdapter
;
				set NewValueList = {{AdapterNumber,$(NoTitle),$(!REG_VT_SZ),$(AdapterNumber)}}
				Shell $(UtilityInf), AddValueList, $(LISKey), $(NewValueList)
				CloseRegKey $(LISKey)
			endif

			ifstr(i) $(ArpParamsKey) != ""
				CloseRegKey $(ArpParamsKey)
			endif

; TCP/IP parameters: first open/create TCP/IP's subkey
			Set TcpKeyName = $(!NTN_ServiceBase)"\"$(LogicalAdapterName)"\Parameters\Tcpip"
			Debug-Output "about to open "$(TcpKeyName)
			OpenRegKey $(!REG_H_LOCAL) "" $(TcpKeyName) $(MAXIMUM_ALLOWED) TcpKey
			ifstr(i) $(TcpKey) == ""
				CreateRegKey $(!REG_H_LOCAL) {$(TcpKeyName),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" TcpKey
			endif
			ifstr(i) $(TcpKey) == ""
				Debug-Output "Failed to open/create the TCP key under the virtual adapter"
				goto fatalRegistry
			endif
			set NewValueList = {{LLInterface,$(NoTitle),$(!REG_VT_SZ),$(TcpipLLInterface)},+
								{UseZeroBroadcast,$(NoTitle),$(!REG_VT_DWORD),$(UseZeroBroadcast)}}
			Shell $(UtilityInf), AddValueList, $(TcpKey), $(NewValueList)

continueCardList = +
			
		EndForListDo
	

;
;	If we added atleast one virtual adapter, tell NCPA to review bindings
;	after this completes.
;
		ifstr(i) $(AddedNewVirtualAdapter) == "Yes"
			Set RegKey = $(!NTN_SoftwareBase)"\Microsoft\NCPA\CurrentVersion"
			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) NcpaKey
			ifstr(i) $(NcpaKey) != ""
				SetRegValue $(NcpaKey) {"BindRestart",$(NoTitle),$(!REG_VT_DWORD),1}
				Debug-Output "ATMARPC: set BindRestart to 1 in "$(RegKey)
				CloseRegKey $(NcpaKey)
			else
				Debug-Output "ATMARPC: failed to open "$(RegKey)
			endif
		endif

		Set RegKey = $(!NTN_ServiceBase)"\atmarpc"
		OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) ArpCKey
		ifstr(i) $(ArpCKey) != ""
			SetRegValue $(ArpCKey) {"DependOnService",$(NoTitle),$(!REG_VT_MULTI_SZ),{"Tcpip","ATMCallManager"}}
			CloseRegKey $(ArpCKey)
		else
			Debug-Output "failed to open ArpCKey key "$(RegKey)
			goto fatalRegistry
		endif
	endif

	ifstr(i) $(!NTN_RegBase) == $(TProductRegBase)
		Debug-Output "ATMARPC/Virtual: Binding Adapter, LinkageKeyName "$(TLinkageKeyName)
	
		OpenRegKey $(!REG_H_LOCAL) "" $(TLinkageKeyName) $(MAXIMUM_ALLOWED) LinkageKey
		ifstr(i) $(LinkageKey) != ""
			GetRegValue $(LinkageKey) "Bind" BindList
			Debug-Output "BindList: "$(BindList)
			Set Binding = *($(BindList),4)
			Debug-Output "Binding:  "$(Binding)
			CloseRegKey $(LinkageKey)
		else
			Debug-Output "failed to open linkage for adapter"
			goto fatalregistry
		endif
	
		set CardList = {}
		set CreateCardList = {}
		ForListDo $(Binding)
			Split-String $($), "\", BindInfo
			QueryListSize BindListSize $(BindInfo)
			set CardName = *($(BindInfo),$(BindListSize))
			Debug-Output "Cardname: "$(CardName)
			ifstr(i) $(CardList) == {}
				set CardList = {$(CardName)}
			else
				set CardList = >($(CardList),$(CardName))
			endif
		EndForListDo
	
		Debug-Output "Cardlist: "$(CardList)
		ForListDo $(CardList)
			Set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\atmarpc"
			Debug-Output "about to open "$(RegKey)
			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) AdapterParamKey
			ifstr(i) $(AdapterParamKey) == ""
				Debug-Output "creating atmarpc key under the adapter"
				CreateRegKey $(!REG_H_LOCAL) {$(RegKey),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" AdapterParamKey
			endif

			ifstr(i) $(AdapterParamKey) != ""
				CloseRegKey $(AdapterParamKey)
			else
				Debug-Output "Failed to open/create the atmarpc key under the adapter"
				goto fatalRegistry
			endif


		EndForListDo
	
	
		Set RegKey = $(!NTN_ServiceBase)"\ipatmarp"
		OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) IpAtmArpKey
		ifstr(i) $(IpAtmArpKey) != ""
			SetRegValue $(IpAtmArpKey) {"DependOnService",$(NoTitle),$(!REG_VT_MULTI_SZ),{"Tcpip","ATMCallManager"}}
			CloseRegKey $(IpAtmArpKey)
		else
			Debug-Output "failed to open IPATMARP key "$(RegKey)
			goto fatalRegistry
		endif
	endif

    goto successful

removeadapter = +
	Debug-Output "ATMARPC: removeadapter: NTN_REGBASE is "$(!NTN_RegBase)
	Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
		Debug-Output "ATMARPC: removing software "$(ProductSoftwareName)

;  Go thru all our bindings and remove the ATMARPC subkey there so
;  that we will redo parameter keys if we are installed again.
;
		OpenRegKey $(!REG_H_LOCAL) "" $(LinkageKeyName) $(MAXIMUM_ALLOWED) LinkageKey
		ifstr(i) $(LinkageKey) != ""
			GetRegValue $(LinkageKey) "Bind" BindList
			Debug-Output "Remove: BindList: "$(BindList)
			Set Binding = *($(BindList),4)
			Debug-Output "Remove: Binding:  "$(Binding)
			CloseRegKey $(LinkageKey)
		else
			Debug-Output "failed to open linkage for adapter"
			goto skipRemoveBindings
		endif
	
		set CardList = {}
		set CreateCardList = {}
		ForListDo $(Binding)
			Split-String $($), "\", BindInfo
			QueryListSize BindListSize $(BindInfo)
			set CardName = *($(BindInfo),$(BindListSize))
			Debug-Output "Remove: Cardname: "$(CardName)
			ifstr(i) $(CardList) == {}
				set CardList = {$(CardName)}
			else
				set CardList = >($(CardList),$(CardName))
			endif
		EndForListDo

		Debug-Output "Cardlist: "$(CardList)
		ForListDo $(CardList)
			Set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters"
			OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) ParamsKey
			ifstr(i) $(ParamsKey) != ""
;
;
;  Go into the LIS0 subkey, get the Virtual Adapter number, and delete the
;  virtual adapter for LIS0. NOTE: this has to be repeated for each LISi.
;
				Set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\AtmArpC\LIS0"
				OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) LISKey
				ifstr(i) $(LISKey) != ""
					GetRegValue $(LISKey) "AdapterNumber" AdapterNoValue
					CloseRegKey $(LISKey)
				endif

				Set AdapterNo = *($(AdapterNoValue),4)
				Set AdapterRegBase = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(AdapterNo)
				Debug-Output "ATMARPC: removing adapter "$(AdapterNo)
				Debug-Output "ATMARPC: remove: AdapterRegBase "$(AdapterRegBase)

				Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
					$(ProductHardwareName), $(AdapterRegBase)
				ifint $($ShellCode) != $(!SHELL_CODE_OK)
					Debug-Output "ShellCode error"
					goto ShellCodeError
				endif
				Debug-Output "Remove: deleting AtmArpC under "$(RegKey)
				DeleteRegTree $(ParamsKey) "AtmArpC"
				CloseRegKey $(ParamsKey)
			endif
		EndForListDo

skipRemoveBindings =+
		Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
			$(ProductSoftwareName)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Debug-Output "ShellCode error"
			goto ShellCodeError
		endif
	else
		Ifstr(i) $(TProductKeyName) == $(!NTN_RegBase)
			Debug-Output "ATMARPC: removing software "$(TProductSoftwareName)
			Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
				$(TProductSoftwareName)
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error"
				goto ShellCodeError
			endif
		else
			Debug-Output "ATMARPC: removing hardware "$(ProductHardwareName)
			Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
				$(ProductHardwareName), $(!NTN_RegBase)
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error"
				goto ShellCodeError
			endif
		endif
	endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    goto end
UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        SetRegValue $(KeyProduct) {"Description",$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)}
        SetRegValue $(KeyProduct) {"Title",$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)}
        CloseRegKey $(KeyProduct)
        OpenRegKey $(!REG_H_LOCAL) "" $(ServiceKeyName) $(MAXIMUM_ALLOWED) ServiceKey
        ifstr(i) $(ServiceKey) != ""
            SetRegValue $(ServiceKey) {"DisplayName",$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDisplayName)}
            CloseRegKey $(ServiceKey)
        endif
    else
        goto fatalregistry
    endif
    goto end
successful = +
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto removeadapter
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)

[StripTrailSlash]
    Split-String $($0) "\" InList
    QueryListSize InListSize, $(InList)
    Ifint $(InListSize) <= 1
        Return $($0)
    Endif
    Set NewString = ""
    ForListDo $(InList)
        ifint $(#) < $(InListSize)
            Set NewString = $(NewString)$($)
        else-ifstr $($) != "\"
            Set NewString = $(NewString)$($)
        endif
    EndForListDo
    Return $(NewString)

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-Platform-Drivers $(PlatformDir) $(!STF_WINDOWSSYSPATH)\drivers
        AddSectionFilesToCopyList Files-Platform-Utils   $(PlatformDir) $(!STF_WINDOWSSYSPATH)
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit

[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-Platform-Drivers $(PlatformDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Platform-Utils   $(PlatformDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-Inf $(InfDir) $(!STF_WINDOWSSYSPATH)
   exit

[Source Media Descriptions]
     1 = "Microsoft ATMARP Client Installation Disk"

[ProductType]
STF_PRODUCT  = Winnt

[Files-Inf]
1, OEMSETUP.INF, SIZE=999, RENAME=$(!UG_Filename)

[Files-Platform-Drivers]
1, ATMARPC.SYS , SIZE=999

[Files-Platform-Utils]

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "IP Over ATM Client"
ProductSoftwareDescription      = "IP Over ATM (RFC 1577) Client Software"
ProductSoftwareDisplayName = "IP Over ATM Client (ATM ARP Module)"
ProductSoftwareTitle    = "IP over ATM Client"
TProductSoftwareDescription      = "Virtual ATMARP Interface"
TProductSoftwareDisplayName = "Virtual ATMARP Adapter"
TProductSoftwareTitle    = "Virtual ATMARP Interface"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"