;/*++ BUILD Version: 0001 // Increment this if a change has global effects ; ;Copyright (c) 1994 Microsoft Corporation ; ;Module Name: ; ; dhcpmsg.h ; ;Abstract: ; ; Definitions for DHCP messages. ; ;Author: ; ; Madan Appiah (madana) 10-Sep-1993 ; Manny Weiser 8-Dec-1992 ; ;Revision History: ; ;Notes: ; ; This file is generated by the MC tool from the dhcpmsg.mc file. ; ; ?? NOTE : These message should go into winerror.h, until then use a ; error code range which is not used by the system. ; ;--*/ ; ;#ifndef _DHCPMESSAGE_ ;#define _DHCPMESSAGE_ ; ;// ;// 20000 - 20099 Reserved for DHCP service specific errors. ;// MessageId=20000 SymbolicName=ERROR_DHCP_REGISTRY_INIT_FAILED Language=English The DHCP server initialization parameters are incorrect. . MessageId=20001 SymbolicName=ERROR_DHCP_DATABASE_INIT_FAILED Language=English The DHCP server was unable to open the DHCP client database. . MessageId=20002 SymbolicName=ERROR_DHCP_RPC_INIT_FAILED Language=English The DHCP server was unable to start as an RPC server. . MessageId=20003 SymbolicName=ERROR_DHCP_NETWORK_INIT_FAILED Language=English The DHCP server was unable to establish a socket connection. . MessageId=20004 SymbolicName=ERROR_DHCP_SUBNET_EXITS Language=English The specified subnet already exists. . MessageId=20005 SymbolicName=ERROR_DHCP_SUBNET_NOT_PRESENT Language=English The specified subnet does not exist. . MessageId=20006 SymbolicName=ERROR_DHCP_PRIMARY_NOT_FOUND Language=English The primary host information for the specified subnet was not found. . MessageId=20007 SymbolicName=ERROR_DHCP_ELEMENT_CANT_REMOVE Language=English The specified DHCP element cannot be removed because it has been used. . MessageId=20009 SymbolicName=ERROR_DHCP_OPTION_EXITS Language=English The specified option already exists. . MessageId=20010 SymbolicName=ERROR_DHCP_OPTION_NOT_PRESENT; Language=English The specified option does not exist. . MessageId=20011 SymbolicName=ERROR_DHCP_ADDRESS_NOT_AVAILABLE; Language=English The specified address is not available. . MessageId=20012 SymbolicName=ERROR_DHCP_RANGE_FULL; Language=English The specified IP address range is full. . MessageId=20013 SymbolicName=ERROR_DHCP_JET_ERROR; Language=English An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error. . MessageId=20014 SymbolicName=ERROR_DHCP_CLIENT_EXISTS; Language=English The specified client already exists in the database. . MessageId=20015 SymbolicName=ERROR_DHCP_INVALID_DHCP_MESSAGE; Language=English The DHCP server received a message that is not valid. . MessageId=20016 SymbolicName=ERROR_DHCP_INVALID_DHCP_CLIENT; Language=English The DHCP server received a message from a client that is not valid. . MessageId=20017 SymbolicName=ERROR_DHCP_SERVICE_PAUSED; Language=English The DHCP server service is paused. . MessageId=20018 SymbolicName=ERROR_DHCP_NOT_RESERVED_CLIENT; Language=English The specified DHCP client is not a reserved client. . MessageId=20019 SymbolicName=ERROR_DHCP_RESERVED_CLIENT; Language=English The specified DHCP client is a reserved client. . MessageId=20020 SymbolicName=ERROR_DHCP_RANGE_TOO_SMALL; Language=English The specified IP address range is too small. . MessageId=20021 SymbolicName=ERROR_DHCP_IPRANGE_EXITS; Language=English The specified IP address range already exists. . MessageId=20022 SymbolicName=ERROR_DHCP_RESERVEDIP_EXITS; Language=English The specified IP address or hardware address is being used by another client. . MessageId=20023 SymbolicName=ERROR_DHCP_INVALID_RANGE; Language=English The specified range either overlaps an existing range or is not valid. . MessageId=20024 SymbolicName=ERROR_DHCP_RANGE_EXTENDED; Language=English The specified range is an extension of an existing range. . MessageId=20025 SymbolicName=ERROR_EXTEND_TOO_SMALL; Language=English The range extension specified is too small. The range must be extended by multiples of 32 addresses. . MessageId=20026 SymbolicName=WARNING_EXTENDED_LESS; Language=English The range was extended less than the specified backward extension. Extend the range by multiples of 32 addresses. . MessageId=20027 SymbolicName=ERROR_DHCP_JET_CONV_REQUIRED; Language=English DHCP database needs to be upgraded to a newer format. Look at the DHCP server event log for more information. . MessageId=20028 SymbolicName=ERROR_SERVER_INVALID_BOOT_FILE_TABLE Language=English The format of the bootstrap protocol file table is incorrect. The correct format is: ,, ,, etc... . MessageId=20029 SymbolicName=ERROR_SERVER_UNKNOWN_BOOT_FILE_NAME Language=English . MessageId=20030 SymbolicName=ERROR_DHCP_SUPER_SCOPE_NAME_TOO_LONG; Language=English The specified superscope name is too long. . MessageId=20032 SymbolicName=ERROR_DHCP_IP_ADDRESS_IN_USE; Language=English This IP address is already in use. . MessageId=20033 SymbolicName=ERROR_DHCP_LOG_FILE_PATH_TOO_LONG Language=English The DHCP audit-log file path is too long. . MessageId=20034 SymbolicName=ERROR_DHCP_UNSUPPORTED_CLIENT Language=English The DHCP service received a request for a valid IP address that is not administered by this server. . MessageId=20035 SymbolicName=EVENT_SERVER_INTERFACE_NOTIFICATION Language=English The DHCP Server failed to receive a notification of interface list changes. Some of the interfaces will not be enabled in the DHCP service. . MessageId=20036 SymbolicName=ERROR_DHCP_JET97_CONV_REQUIRED; Language=English The DHCP database needs to be upgraded to the current Jet format. Look at the DHCP service event log for more information. . MessageId=20037 SymbolicName=ERROR_DHCP_ROGUE_INIT_FAILED Language=English The DHCP Server is not servicing any clients on the network because it could not determine if it is authorized to run. This might be due to network problems or insufficient resources. . MessageId=20038 SymbolicName=ERROR_DHCP_ROGUE_SAMSHUTDOWN Language=English The DHCP service is shutting down because another DHCP server with the IP address %1 is active on the network. . MessageId=20039 SymbolicName=ERROR_DHCP_ROGUE_NOT_AUTHORIZED Language=English The DHCP service is not servicing any clients on the network because it has determined that it is not authorized to run. . MessageId=20040 SymbolicName=ERROR_DHCP_ROGUE_DS_UNREACHABLE Language=English The DHCP service is unable to contact the directory service for domain %1. The DHCP service will continue to attempt to contact the directory service. During this time, no clients on the network will be serviced. . MessageId=20041 SymbolicName=ERROR_DHCP_ROGUE_DS_CONFLICT Language=English The DHCP service is not servicing any clients on the network because its authorization information conflicts with another DHCP server whose IP address is %1 and is active on domain %2. . MessageId=20042 SymbolicName=ERROR_DHCP_ROGUE_NOT_OUR_ENTERPRISE Language=English The DHCP service is ignoring a request from another DHCP service because it is on a different directory service enterprise (Directory Service Enterprise root = %1) . MessageId=20043 SymbolicName=ERROR_DHCP_ROGUE_STANDALONE_IN_DS Language=English The DHCP service has detected a directory service environment on the network. If there is directory service on the network, DHCP service can only run on a server which is part of the directory service. Since this server belongs to a workgroup, the DHCP service is terminating. . MessageId=20044 SymbolicName=ERROR_DHCP_CLASS_NOT_FOUND Language=English The class name being used is unknown or incorrect. . MessageId=20045 SymbolicName=ERROR_DHCP_CLASS_ALREADY_EXISTS Language=English The class name is already in use or the class information is already in use. . MessageId=20046 SymbolicName=ERROR_DHCP_SCOPE_NAME_TOO_LONG Language=English The specified scope name is too long. The name is limited to a maximum of 256 characters. . MessageId=20047 SymbolicName=ERROR_DHCP_DEFAULT_SCOPE_EXITS Language=English There is already a default scope configured on the server. . MessageId=20048 SymbolicName=ERROR_DHCP_CANT_CHANGE_ATTRIBUTE Language=English The Dynamic BOOTP attribute cannot be turned on or off. . MessageId=20049 SymbolicName=ERROR_DHCP_IPRANGE_CONV_ILLEGAL Language=English Conversion of a scope to a DHCP Only scope or to a BOOTP Only scope is not allowed when DHCP and BOOTP clients both exist in the scope. Manually delete either the DHCP or the BOOTP clients from the scope, as appropriate for the type of scope being created. . MessageId=20050 SymbolicName=ERROR_DHCP_NETWORK_CHANGED Language=English The network has changed. Retry this operation after checking for the network changes. Network changes may be caused by interfaces that are new or no longer valid, or by IP addresses that are new or no longer valid. . MessageId=20051 SymbolicName=ERROR_DHCP_CANNOT_MODIFY_BINDINGS Language=English The bindings to internal IP addresses cannot be modified. . MessageId=20052 SymbolicName=ERROR_DHCP_SUBNET_EXISTS Language=English The scope parameters are incorrect. Either the scope already exists or its subnet address and mask is inconsistent with the subnet address and mask of an existing scope. . MessageId=20053 SymbolicName=ERROR_DHCP_MSCOPE_EXISTS Language=English The multicast scope parameters are incorrect. Either the scope already exists or its properties are inconsistent with the properties of another existing scope. . MessageId=20054 SymbolicName=ERROR_MSCOPE_RANGE_TOO_SMALL Language=English The multicast scope range must have atleast 256 IP addresses. . ;// ;// 20070 + are the message used here.. ;// MessageId=20070 SymbolicName=ERROR_DDS_NO_DS_AVAILABLE Language=English The DHCP service could not contact Active Directory. . MessageId=20071 SymbolicName=ERROR_DDS_NO_DHCP_ROOT Language=English The DHCP service root could not be found in the Active Directory. . MessageId=20072 SymbolicName=ERROR_DDS_UNEXPECTED_ERROR Language=English An unexpected error occurred while accessing the Active Directory. . MessageId=20073 SymbolicName=ERROR_DDS_TOO_MANY_ERRORS Language=English There were too many errors to proceed. . MessageId=20074 SymbolicName=ERROR_DDS_DHCP_SERVER_NOT_FOUND Language=English A DHCP service could not be found. . MessageId=20075 SymbolicName=ERROR_DDS_OPTION_ALREADY_EXISTS Language=English The specified options are already present in the directory service. . MessageId=20076 SymbolicName=ERROR_DDS_OPTION_DOES_NOT_EXIST Language=English The specified options are not present in the directory service. . MessageId=20077 SymbolicName=ERROR_DDS_CLASS_EXISTS Language=English The specified classes already exist in the directory service. . MessageId=20078 SymbolicName=ERROR_DDS_CLASS_DOES_NOT_EXIST Language=English The specified classes do not exist in the directory service. . MessageId=20079 SymbolicName=ERROR_DDS_SERVER_ALREADY_EXISTS Language=English The specified servers are already present in the directory service. . MessageId=20080 SymbolicName=ERROR_DDS_SERVER_DOES_NOT_EXIST Language=English The specified servers are not present in the directory service. . MessageId=20081 SymbolicName=ERROR_DDS_SERVER_ADDRESS_MISMATCH Language=English The specified server address does not belong to the identified server name. . MessageId=20082 SymbolicName=ERROR_DDS_SUBNET_EXISTS Language=English The specified subnets already exist in the directory service. . MessageId=20083 SymbolicName=ERROR_DDS_SUBNET_HAS_DIFF_SSCOPE Language=English The specified subnet belongs to a different superscope. . MessageId=20084 SymbolicName=ERROR_DDS_SUBNET_NOT_PRESENT Language=English The specified subnet is not present in the directory service. . MessageId=20085 SymbolicName=ERROR_DDS_RESERVATION_NOT_PRESENT Language=English The specified reservation is not present in the directory service. . MessageId=20086 SymbolicName=ERROR_DDS_RESERVATION_CONFLICT Language=English The reservation specified conflicts with an existing reservation in the directory service. . MessageId=20087 SymbolicName=ERROR_DDS_POSSIBLE_RANGE_CONFLICT Language=English The specified IP range conflicts with some existing IP range in the directory service. . MessageId=20088 SymbolicName=ERROR_DDS_RANGE_DOES_NOT_EXIST Language=English The specified IP range is not present in the directory service. . ;// ;// This is the last error message for the DHCP service. Should not be ;// used internally except for place marker. All new errors should be ;// filled before this. No localization needed for this. ;// MessageId=20089 SymbolicName=ERROR_LAST_DHCP_SERVER_ERROR Language=English . ;// ;// 1000 - 1099 Reserved for DHCP server events. ;// MessageId=1000 SymbolicName=EVENT_SERVER_UNKNOWN_OPTION Language=English The DHCP service received the unknown option %1, with a length of %2. The raw option data is given below. . MessageId=1001 SymbolicName=EVENT_SERVER_FAILED_REGISTER_SC Language=English The DHCP service failed to register with Service Controller. The following error occurred: %n%1. . MessageId=1002 SymbolicName=EVENT_SERVER_INIT_DATA_FAILED Language=English The DHCP service failed to initialize its global parameters. The following error occurred: %n%1 . MessageId=1003 SymbolicName=EVENT_SERVER_INIT_REGISTRY_FAILED Language=English The DHCP service failed to initialize its registry parameters. The following error occurred: %n%1 . MessageId=1004 SymbolicName=EVENT_SERVER_INIT_DATABASE_FAILED Language=English The DHCP service failed to initialize the database. The following error occurred: %n%1 . MessageId=1005 SymbolicName=EVENT_SERVER_INIT_WINSOCK_FAILED Language=English The DHCP service failed to initialize Winsock startup. The following error occurred: %n%1 . MessageId=1006 SymbolicName=EVENT_SERVER_INIT_RPC_FAILED Language=English The DHCP service failed to start as a RPC server. The following error occurred : %n%1 . MessageId=1007 SymbolicName=EVENT_SERVER_INIT_SOCK_FAILED Language=English The DHCP service failed to initialize Winsock data. The following error occurred: %n%1 . MessageId=1008 SymbolicName=EVENT_SERVER_SHUTDOWN Language=English The DHCP service is shutting down due to the following error: %n%1 . MessageId=1009 SymbolicName=EVENT_SERVER_CLIENT_CLEANUP Language=English The DHCP service encountered the following error while cleaning up the pending client records: %n%1 . MessageId=1010 SymbolicName=EVENT_SERVER_DATABASE_CLEANUP Language=English The DHCP service encountered the following error while cleaning up the database: %n%1 . MessageId=1011 SymbolicName=EVENT_SERVER_LEASE_NACK Language=English The DHCP service issued a NACK (negative acknowledgement message) to the client, %2, for the address, %1. . MessageId=1012 SymbolicName=EVENT_SERVER_LEASE_DECLINED Language=English The DHCP client, %2, declined the address %1. . MessageId=1013 SymbolicName=EVENT_SERVER_LEASE_RELEASE Language=English The DHCP Client, %2, released the address %1. . MessageId=1014 SymbolicName=EVENT_SERVER_JET_ERROR Language=English The following problem occurred with the Jet database %1: Reading or writing to the Jet database failed. If this message appears frequently, either there was insufficient disk space for database OR backup database or the database might be corrupt. To correct this problem, either increase available disk space or refer to the documentation on restoring the database. After the database is restored, make sure that conflict detection is enabled in the server properties. Additional Debug Information: %2. . MessageId=1015 SymbolicName=EVENT_SERVER_JET_WARNING Language=English The JET Database call returned the following warning : %1. Additional Debug Information: %2. . MessageId=1016 SymbolicName=EVENT_SERVER_DATABASE_BACKUP Language=English The DHCP service encountered the following error when backing up the database: %n%1 . MessageId=1017 SymbolicName=EVENT_SERVER_CONFIG_BACKUP Language=English The DHCP service encountered the following error when backing up the registry configuration: %n%1 . MessageId=1018 SymbolicName=EVENT_SERVER_DATABASE_RESTORE_FAILED Language=English The DHCP service failed to restore the database. The following error occurred: %n%1 . MessageId=1019 SymbolicName=EVENT_SERVER_CONFIG_RESTORE_FAILED Language=English The DHCP service failed to restore the DHCP registry configuration. The following error occurred: %n%1 . MessageId=1020 SymbolicName=EVENT_SERVER_LOW_ADDRESS_WARNING Language=English Scope, %1, is %2 percent full with only %3 IP addresses remaining. . MessageId=1021 SymbolicName=EVENT_SERVER_LOAD_JET_FAILED Language=English The DHCP service could not load the JET database library successfully. . MessageId=1022 SymbolicName=EVENT_SERVER_JET_CONV_REQUIRED Language=English The DHCP service could not use the database. If this service was started for the first time after the upgrade from NT 3.51 or earlier, you need to run the utility, upg351db.exe, on the DHCP database to convert it to the new JET database format. Restart the DHCP service after you have upgraded the database. . MessageId=1023 SymbolicName=EVENT_SERVER_JET_CONV_IN_PROGRESS Language=English The DHCP service will now terminate because the existing database needs conversion to Windows 2000 format. The conversion via the jetconv process, has initiated. Do not reboot or stop the jetconv process. The conversion may take up to 10 minutes depending on the size of the database. Terminate DHCP now by clicking OK. This is required for the database conversion to succeed. NOTE: The DHCP service will be restarted automatically when the conversion is completed. To check conversion status, look at the Application event log for the jetconv process. . MessageId=1024 SymbolicName=EVENT_SERVER_INIT_AND_READY Language=English The DHCP service has initialized and is ready . MessageId=1025 SymbolicName=EVENT_SERVER_BOOT_FILE_TABLE Language=English The DHCP service was unable to read the BOOTP file table from the registry. The DHCP service will be unable to respond to BOOTP requests that specify the boot file name. . MessageId=1026 SymbolicName=EVENT_SERVER_BOOT_FILE_NAME Language=English The DHCP service was unable to read the global BOOTP file name from the registry. . MessageId=1027 SymbolicName=EVENT_SERVER_AUDIT_LOG_APPEND_FAILED Language=English The audit log file cannot be appended. . MessageId=1028 SymbolicName=EVENT_SERVER_INIT_AUDIT_LOG_FAILED Language=English The DHCP service failed to initialize the audit log. The following error occurred: %n%1 . MessageId=1029 SymbolicName=EVENT_SERVER_PING_FAILED Language=English The DHCP service was unable to ping for a new IP address. The address was leased to the client. . MessageId=1030 SymbolicName=EVENT_SERVER_MOVE_AUDIT_LOG_FAILED Language=English The audit log file could not be backed up. The following error occurred: %n%1 . MessageId=1031 SymbolicName=EVENT_SERVER_CALLOUT_UNHANDLED_EXCEPTION Language=English The installed server callout .dll file has caused an exception. The exception was: %n%1. The server has ignored this exception. All further exceptions will be ignored. . MessageId=1032 SymbolicName=EVENT_SERVER_CALLOUT_LOAD_EXCEPTION Language=English The installed server callout .dll file has caused an exception. The exception was: %n%1. The server has ignored this exception and the .dll file could not be loaded. . MessageId=1033 SymbolicName=EVENT_SERVER_CALLOUT_LOAD_SUCCESS Language=English The DHCP service has successfully loaded one or more callout DLLs. . MessageId=1034 SymbolicName=EVENT_SERVER_CALLOUT_LOAD_FAILED Language=English The DHCP service has failed to load one or more callout DLLs. The following error occured: %n%1 . MessageId=1035 SymbolicName=EVENT_SERVER_READ_ONLY_GROUP_ERROR Language=English The DHCP service was unable to create or lookup the DHCP Users local group on this computer. The error code is in the data. . MessageId=1036 SymbolicName=EVENT_SERVER_ADMIN_GROUP_ERROR Language=English The DHCP server was unable to create or lookup the DHCP Administrators local group on this computer. The error code is in the data. . MessageId=1037 SymbolicName=EVENT_SERVER_CLEANUP_STARTED Language=English The DHCP service has started to clean up the database. . MessageId=1038 SymbolicName=EVENT_SERVER_IPCLEANUP_FINISHED Language=English The DHCP service has cleaned up the database for unicast IP addresses -- %1 leases have been recovered and %2 records have been removed from the database. . MessageId=1039 SymbolicName=EVENT_SERVER_MCASTCLEANUP_FINISHED Language=English The DHCP service has cleaned up the database for multicast IP addresses -- %1 leases have expired (been marked for deletion) and %2 records have been removed from the database. . MessageId=1040 SymbolicName=EVENT_SERVER_DATABASE_RESTORE_SUCCEEDED Language=English The DHCP service successfully restored the database. . MessageId=1041 SymbolicName=DHCP_ROGUE_EVENT_NO_NETWORK Language=English. The DHCP service is not servicing any clients because none of the active network interfaces have statically configured IP addresses, or there are no active interfaces. . MessageId=1042 SymbolicName=DHCP_ROGUE_EVENT_UNAUTHORIZED_INFO Language=English The DHCP/BINL service running on this machine has detected the following servers on the network. Their domains are listed below as well as the authorization status of the local machine as verified against the directory service enterprises of each of these domains. If the servers do not belong to any domain, the domain is listed as empty. The IP address of each of these servers are listed in parentheses. %1 . MessageId=1043 SymbolicName=DHCP_ROGUE_EVENT_STARTED Language=English The DHCP/BINL service on the local machine has determined that it is authorized to start. It is servicing clients now. . MessageId=1044 SymbolicName=DHCP_ROGUE_EVENT_STARTED_DOMAIN Language=English The DHCP/BINL service on the local machine, belonging to the Windows Administrative domain %2, has determined that it is authorized to start. It is servicing clients now. . MessageId=1045 SymbolicName=DHCP_ROGUE_EVENT_STOPPED Language=English The DHCP/BINL service on the local machine has determined that it is not authorized to start. It has stopped servicing clients. The following are some possible reasons for this: %n%tThis machine belongs to a workgroup and has encountered another DHCP Server (belonging to a Windows Administrative Domain) servicing the same network. %n%n%tAn unexpected network error occurred. . MessageId=1046 SymbolicName=DHCP_ROGUE_EVENT_STOPPED_DOMAIN Language=English The DHCP/BINL service on the local machine, belonging to the Windows Administrative domain %2, has determined that it is not authorized to start. It has stopped servicing clients. The following are some possible reasons for this: %n%tThis machine is part of a directory service enterprise and is not authorized in the same domain. (See help on the DHCP Service Management Tool for additional information). %n%n%tThis machine cannot reach its directory service enterprise and it has encountered another DHCP service on the network belonging to a directory service enterprise on which the local machine is not authorized. %n%n%tSome unexpected network error occurred. . MessageId=1047 SymbolicName=DHCP_ROGUE_EVENT_JUST_UPGRADED Language=English The DHCP/BINL service on the local machine has determined that it is authorized to start. It is servicing clients now. %nThe DHCP/BINL service has determined that the machine was recently upgraded. If the machine is intended to belong to a directory service enterprise, the DHCP service must be authorized in the directory service for it to start servicing clients. (See help on DHCP Service Management Tool for authorizing the server). . MessageId=1048 SymbolicName=DHCP_ROGUE_EVENT_JUST_UPGRADED_DOMAIN Language=English The DHCP/BINL Service on the local machine, belonging to Windows Domain %2, has determined that it is authorized to start. It is servicing clients now. It has determined that the computer was recently upgraded. It has also determined that either there is no directory service enterprise for the domain or that the computer is not authorized in the directory service. All DHCP services that belong to a directory service enterprise should be authorized in the directory service to service clients. (See help on the DHCP Service Management Tool for authorizing a DHCP service in the directory service). . MessageId=1049 SymbolicName=DHCP_ROGUE_EVENT_CANT_FIND_DOMAIN Language=English The DHCP/BINL service on the local machine encountered an error while trying to find the domain of the local machine. The error was: %3. . MessageId=1050 SymbolicName=DHCP_ROGUE_EVENT_NETWORK_FAILURE Language=English The DHCP/BINL service on the local machine encountered a network error. The error was: %3. . MessageId=1051 SymbolicName=DHCP_ROGUE_EVENT_UNAUTHORIZED Language=English The DHCP/BINL service has determined that it is not authorized to service clients on this network for the Windows domain: %2. . MessageId=1052 SymbolicName=DHCP_ROGUE_EVENT_OTHER_SERVER Language=English The DHCP/BINL service on this workgroup server has encountered another server with IP Address, %1, belonging to the domain %2. . MessageId=1053 SymbolicName=DHCP_ROGUE_EVENT_SAM_OTHER_SERVER Language=English The DHCP/BINL service on this Small Business Server has encountered another server on this network with IP Address, %1, belonging to the domain: %2. . MessageId=1054 SymbolicName=DHCP_ROGUE_EVENT_SHUTDOWN Language=English The DHCP/BINL service on this computer is shutting down. See the previous event log messages for reasons. . MessageId=1055 SymbolicName=DHCP_EVENT_DNS_REGPARAMS_FAILURE Language=English The DHCP service was unable to impersonate the credentials necessary for DNS registrations: %n%1. The local system credentials is being used. . MessageId=1056 SymbolicName=DHCP_EVENT_NO_DNSCREDENTIALS_ON_DC Language=English The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service. This is not a recommended security configuration. Credentials for Dynamic DNS registrations may be configured using the command line "netsh dhcp server set dnscredentials" or via the DHCP Administrative tool. . MessageId=1057 SymbolicName=EVENT_SERVER_DATABASE_CONVERSION Language=English The DHCP service was unable to convert the temporary database to ESE format: %n%1. . MessageId=1058 SymbolicName=EVENT_SERVER_INIT_CONFIG_FAILED Language=English The DHCP service failed to initialize its configuration parameters. The following error occurred: %n%1 . MessageId=1059 SymbolicName=EVENT_SERVER_COULDNT_SEE_DS Language=English The DHCP service failed to see a directory server for authorization. . MessageId=1060 SymbolicName=EVENT_SERVER_AUDITLOG_PATH_NOT_ACCESSIBLE Language=English The DHCP service was unable to access path specified for the audit log. . MessageId=1061 SymbolicName=EVENT_SERVER_BACKUP_PATH_NOT_ACCESSIBLE Language=English The DHCP service was unable to access path specified for the database backups. . MessageId=1062 SymbolicName=EVENT_SERVER_DB_PATH_NOT_ACCESSIBLE Language=English The DHCP service was unable to access path specified for the database . ;// ;// Audit log strings ;// ;// ;// BEGIN: these strings should be <= 10 characters in length ??? ;// MessageId=+1 SymbolicName=DHCP_ROGUE_STRING_FMT_UNAUTHORIZED Language=English The DHCP/BINL service is not authorized in the directory service domain "%2" (Server IP Address %1) . MessageId=+1 SymbolicName=DHCP_ROGUE_STRING_FMT_AUTHORIZED Language=English The DHCP/BINL service is authorized in the directory service domain "%2" (Server IP Address %1) . MessageId=+1 SymbolicName=DHCP_ROGUE_STRING_FMT_NOT_CHECKED Language=English The DHCP/BINL service has not determined if it is authorized in directory domain "%2" (Server IP Address %1) . MessageId=+1 SymbolicName=DHCP_IP_LOG_ASSIGN_NAME Language=English Assign%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_BOOTP_NAME Language=English Bootp%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_DYNBOOTP_NAME Language=English Dynamic Bootp%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_RENEW_NAME Language=English Renew%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_RELEASE_NAME Language=English Release%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_CONFLICT_NAME Language=English Conflict%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_RANGE_FULL_NAME Language=English Scope Full%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_START_NAME Language=English Started%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_STOP_NAME Language=English Stopped%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_DISK_SPACE_LOW_NAME Language=English Audit Log Paused%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_FILE_NAME Language=English dhcpsrv.log%0 . MessageId=+1 SymbolicName=DHCP_BAD_ADDRESS_NAME Language=English BAD_ADDRESS%0 . MessageId=+1 SymbolicName=DHCP_BAD_ADDRESS_INFO Language=English This address is already in use%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_NACK_NAME Language=English NACK%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_DELETED_NAME Language=English Deleted%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_EXPIRED_NAME Language=English Expired%0 . MessageId=+1 SymbolicName=DHCP_IP_LOG_HEADER Language=English Microsoft DHCP Service Activity Log Event ID Meaning 00 The log was started. 01 The log was stopped. 02 The log was temporarily paused due to low disk space. 10 A new IP address was leased to a client. 11 A lease was renewed by a client. 12 A lease was released by a client. 13 An IP address was found to be in use on the network. 14 A lease request could not be satisfied because the scope's address pool was exhausted. 15 A lease was denied. 16 A lease was deleted. 17 A lease was expired. 20 A BOOTP address was leased to a client. 21 A dynamic BOOTP address was leased to a client. 22 A BOOTP request could not be satisfied because the scope's address pool for BOOTP was exhausted. 23 A BOOTP IP address was deleted after checking to see it was not in use. 50+ Codes above 50 are used for Rogue Server Detection information. ID Date,Time,Description,IP Address,Host Name,MAC Address . MessageId=+1 SymbolicName=DHCP_IP_BOOTP_LOG_RANGE_FULL_NAME Language=English BOOTP Range Full%0 . MessageId=+1 SymbolicName=DHCP_IP_BOOTP_LOG_DELETED_NAME Language=English BOOTP deleted%0 . ;// ;// days of the week strings used for file name by auditlogging code ;// MessageId=+1 SymbolicName=DHCP_LOG_FILE_NAME_SUNDAY Language=English DhcpSrvLog-Sun.log%0 . MessageId=+1 SymbolicName=DHCP_LOG_FILE_NAME_MONDAY Language=English DhcpSrvLog-Mon.log%0 . MessageId=+1 SymbolicName=DHCP_LOG_FILE_NAME_TUESDAY Language=English DhcpSrvLog-Tue.log%0 . MessageId=+1 SymbolicName=DHCP_LOG_FILE_NAME_WEDNESDAY Language=English DhcpSrvLog-Wed.log%0 . MessageId=+1 SymbolicName=DHCP_LOG_FILE_NAME_THURSDAY Language=English DhcpSrvLog-Thu.log%0 . MessageId=+1 SymbolicName=DHCP_LOG_FILE_NAME_FRIDAY Language=English DhcpSrvLog-Fri.log%0 . MessageId=+1 SymbolicName=DHCP_LOG_FILE_NAME_SATURDAY Language=English DhcpSrvLog-Sat.log%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_COULDNT_SEE_DS Language=English Unreachable Domain%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_AUTHORIZED Language=English Authorization succeeded%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_UPGRADED Language=English Server Upgraded%0 . Messageid=+1 SymbolicName=DHCP_ROGUE_LOG_PREAUTHORIZED Language=English Cached authorization%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_UNAUTHORIZED Language=English Authorization failed%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_STARTED Language=English Authorized(servicing)%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_STOPPED Language=English Authorization failure, stopped servicing%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_SAME_DOMAIN Language=English Server found in our domain%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_CANT_FIND_DOMAIN Language=English Could not find domain%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_NETWORK_FAILURE Language=English Network failure%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_NO_DSDC Language=English No DC is DS Enabled%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_OTHER_SERVER Language=English Server found that belongs to DS domain%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_SAM_OTHER_SERVER Language=English Another server was found%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_RESTART Language=English Restarting rogue detection%0 . MessageId=+1 SymbolicName=DHCP_ROGUE_LOG_NO_NETWORK Language=English No static IP address bound to DHCP server%0 . MessageId=+1 SymbolicName=DHCP_MSFT50_CLASS_NAME Language=English Microsoft Windows 2000 Options%0 . MessageId=+1 SymbolicName=DHCP_MSFT50_CLASS_DESCR_NAME Language=English Microsoft vendor-specific options for Windows 2000 Clients%0 . MessageId=+1 SymbolicName=DHCP_MSFT98_CLASS_NAME Language=English Microsoft Windows 98 Options%0 . MessageId=+1 SymbolicName=DHCP_MSFT98_CLASS_DESCR_NAME Language=English Microsoft vendor-specific options for Windows 98 Clients%0 . MessageId=+1 SymbolicName=DHCP_MSFT_CLASS_NAME Language=English Microsoft Options%0 . MessageId=+1 SymbolicName=DHCP_MSFT_CLASS_DESCR_NAME Language=English Microsoft vendor-specific options applicable to Windows 98 and Windows 2000 Clients%0 . MessageId=+1 SymbolicName=DHCP_NETBIOS_VENDOR_OPTION_NAME Language=English Microsoft Disable Netbios Option %0 . MessageId=+1 SymbolicName=DHCP_NETBIOS_VENDOR_DESCR_NAME Language=English Option for enabling or disabling Netbios for Microsoft Windows 2000 Clients%0 . MessageId=+1 SymbolicName=DHCP_RELEASE_SHUTDOWN_VENDOR_OPTION_NAME Language=English Microsoft Release DHCP Lease On Shutdown Option%0 . MessageId=+1 SymbolicName=DHCP_RELEASE_SHUTDOWN_VENDOR_DESCR_NAME Language=English Option for enabling or disabling Windows 2000 Clients to release DHCP lease on shutdown%0 . MessageId=+1 SymbolicName=DHCP_METRICBASE_VENDOR_OPTION_NAME Language=English Microsoft Default Router Metric Base%0 . MessageId=+1 SymbolicName=DHCP_METRICBASE_VENDOR_DESCR_NAME Language=English Default Router Base Metrics for Microsoft Windows 2000 Clients%0 . MessageId=+1 SymbolicName=DHCP_CLUSTER_CONNECTION_NAME Language=English Internal%0 . MessageId=+1 SymbolicName=DHCP_USERS_GROUP_NAME Language=English DHCP Users%0 . MessageId=+1 SymbolicName=DHCP_USERS_GROUP_DESCRIPTION Language=English Members who have view-only access to the DHCP service%0 . MessageId=+1 SymbolicName=DHCP_ADMINS_GROUP_NAME Language=English DHCP Administrators%0 . MessageId=+1 SymbolicName=DHCP_ADMINS_GROUP_DESCRIPTION Language=English Members who have administrative access to DHCP service%0 . MessageId=+1 SymbolicName=DHCP_MSFT_RRAS_CLASS_NAME Language=English Default Routing and Remote Access Class%0 . MessageId=+1 SymbolicName=DHCP_MSFT_RRAS_CLASS_DESCR_NAME Language=English User class for remote access clients%0 . MessageId=+1 SymbolicName=DHCP_MSFT_DYNBOOTP_CLASS_NAME Language=English Default BOOTP Class%0 . MessageId=+1 SymbolicName=DHCP_MSFT_DYNBOOTP_CLASS_DESCR_NAME Language=English User class for BOOTP Clients%0 . MessageId=+1 SymbolicName=DHCP_MSFT_CSR_OPTION_NAME Language=English Classless Static Routes%0 . MessageId=+1 SymbolicName=DHCP_MSFT_CSR_DESCR_NAME Language=English Destination, mask and router IP addresses in priority order%0 . ;// ;// Keep this message as the last string that is needed by the DHCP service. ;// MessageId=+1 SymbolicName=DHCP_LAST_STRING_DUMMY_MESSAGE Language=English %0 . ;#endif // _DHCPMESSAGE_