#include "stdafx.h"
#pragma  hdrstop

/*
 * jcapimin.c
 *
 * Copyright (C) 1994-1995, Thomas G. Lane.
 * This file is part of the Independent JPEG Group's software.
 * For conditions of distribution and use, see the accompanying README file.
 *
 * This file contains application interface code for the compression half
 * of the JPEG library.  These are the "minimum" API routines that may be
 * needed in either the normal full-compression case or the transcoding-only
 * case.
 *
 * Most of the routines intended to be called directly by an application
 * are in this file or in jcapistd.c.  But also see jcparam.c for
 * parameter-setup helper routines, jcomapi.c for routines shared by
 * compression and decompression, and jctrans.c for the transcoding case.
 */

#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"

/*
 * Compression initialization.
 * Before calling this, all parameters and a data destination must be set up.
 *
 * We require a write_all_tables parameter as a failsafe check when writing
 * multiple datastreams from the same compression object.  Since prior runs
 * will have left all the tables marked sent_table=TRUE, a subsequent run
 * would emit an abbreviated stream (no tables) by default.  This may be what
 * is wanted, but for safety's sake it should not be the default behavior:
 * programmers should have to make a deliberate choice to emit abbreviated
 * images.  Therefore the documentation and examples should encourage people
 * to pass write_all_tables=TRUE; then it will take active thought to do the
 * wrong thing.
 */

GLOBAL (void)
jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables)
{
  if (cinfo->global_state != CSTATE_START)
    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);

  if (write_all_tables)
    jpeg_suppress_tables(cinfo, FALSE);	/* mark all tables to be written */

  /* (Re)initialize error mgr and destination modules */
  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
  (*cinfo->dest->init_destination) (cinfo);
  /* Perform master selection of active modules */
  jinit_compress_master(cinfo);
  /* Set up for the first pass */
  (*cinfo->master->prepare_for_pass) (cinfo);
  /* Ready for application to drive first pass through jpeg_write_scanlines
   * or jpeg_write_raw_data.
   */
  cinfo->next_scanline = 0;
  cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING);
}


/*
 * Initialization of a JPEG compression object.
 * The error manager must already be set up (in case memory manager fails).
 */

GLOBAL(void)
jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize)
{
  int i;

  /* Guard against version mismatches between library and caller. */
  cinfo->mem = NULL;		/* so jpeg_destroy knows mem mgr not called */
  if (version != JPEG_LIB_VERSION)
    ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version);
  if (structsize != SIZEOF(struct jpeg_compress_struct))
    ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, 
	     (int) SIZEOF(struct jpeg_compress_struct), (int) structsize);

  /* For debugging purposes, zero the whole master structure.
   * But error manager pointer is already there, so save and restore it.
   */
  {
    struct jpeg_error_mgr * err = cinfo->err;
    MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct));
    cinfo->err = err;
  }
  cinfo->is_decompressor = FALSE;

  /* Initialize a memory manager instance for this object */
  jinit_memory_mgr((j_common_ptr) cinfo);

  /* Zero out pointers to permanent structures. */
  cinfo->progress = NULL;
  cinfo->dest = NULL;

  cinfo->comp_info = NULL;

  for (i = 0; i < NUM_QUANT_TBLS; i++)
    cinfo->quant_tbl_ptrs[i] = NULL;

  for (i = 0; i < NUM_HUFF_TBLS; i++) {
    cinfo->dc_huff_tbl_ptrs[i] = NULL;
    cinfo->ac_huff_tbl_ptrs[i] = NULL;
  }

  cinfo->input_gamma = 1.0;	/* in case application forgets */

  /* OK, I'm ready */
  cinfo->global_state = CSTATE_START;
}


/*
 * Destruction of a JPEG compression object
 */

GLOBAL (void)
jpeg_destroy_compress (j_compress_ptr cinfo)
{
  jpeg_destroy((j_common_ptr) cinfo); /* use common routine */
}


/*
 * Abort processing of a JPEG compression operation,
 * but don't destroy the object itself.
 */

GLOBAL (void)
jpeg_abort_compress (j_compress_ptr cinfo)
{
  jpeg_abort((j_common_ptr) cinfo); /* use common routine */
}


/*
 * Forcibly suppress or un-suppress all quantization and Huffman tables.
 * Marks all currently defined tables as already written (if suppress)
 * or not written (if !suppress).  This will control whether they get emitted
 * by a subsequent jpeg_start_compress call.
 *
 * This routine is exported for use by applications that want to produce
 * abbreviated JPEG datastreams.  It logically belongs in jcparam.c, but
 * since it is called by jpeg_start_compress, we put it here --- otherwise
 * jcparam.o would be linked whether the application used it or not.
 */

GLOBAL (void)
jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress)
{
  int i;
  JQUANT_TBL * qtbl;
  JHUFF_TBL * htbl;

  for (i = 0; i < NUM_QUANT_TBLS; i++) {
    if ((qtbl = cinfo->quant_tbl_ptrs[i]) != NULL)
      qtbl->sent_table = suppress;
  }

  for (i = 0; i < NUM_HUFF_TBLS; i++) {
    if ((htbl = cinfo->dc_huff_tbl_ptrs[i]) != NULL)
      htbl->sent_table = suppress;
    if ((htbl = cinfo->ac_huff_tbl_ptrs[i]) != NULL)
      htbl->sent_table = suppress;
  }
}

/*
 * Write some scanlines of data to the JPEG compressor.
 *
 * The return value will be the number of lines actually written.
 * This should be less than the supplied num_lines only in case that
 * the data destination module has requested suspension of the compressor,
 * or if more than image_height scanlines are passed in.
 *
 * Note: we warn about excess calls to jpeg_write_scanlines() since
 * this likely signals an application programmer error.  However,
 * excess scanlines passed in the last valid call are *silently* ignored,
 * so that the application need not adjust num_lines for end-of-image
 * when using a multiple-scanline buffer.
 */

GLOBAL (JDIMENSION)
jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines,
		      JDIMENSION num_lines)
{
  JDIMENSION row_ctr, rows_left;

  if (cinfo->global_state != CSTATE_SCANNING)
    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
  if (cinfo->next_scanline >= cinfo->image_height)
    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);

  /* Call progress monitor hook if present */
  if (cinfo->progress != NULL) {
    cinfo->progress->pass_counter = (long) cinfo->next_scanline;
    cinfo->progress->pass_limit = (long) cinfo->image_height;
    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
  }

  /* Give master control module another chance if this is first call to
   * jpeg_write_scanlines.  This lets output of the frame/scan headers be
   * delayed so that application can write COM, etc, markers between
   * jpeg_start_compress and jpeg_write_scanlines.
   */
  if (cinfo->master->call_pass_startup)
    (*cinfo->master->pass_startup) (cinfo);

  /* Ignore any extra scanlines at bottom of image. */
  rows_left = cinfo->image_height - cinfo->next_scanline;
  if (num_lines > rows_left)
    num_lines = rows_left;

  row_ctr = 0;
  (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines);
  cinfo->next_scanline += row_ctr;
  return row_ctr;
}


/*
 * Alternate entry point to write raw data.
 * Processes exactly one iMCU row per call, unless suspended.
 */

GLOBAL (JDIMENSION)
jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data,
		     JDIMENSION num_lines)
{
  JDIMENSION lines_per_iMCU_row;

  if (cinfo->global_state != CSTATE_RAW_OK)
    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
  if (cinfo->next_scanline >= cinfo->image_height) {
    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
    return 0;
  }

  /* Call progress monitor hook if present */
  if (cinfo->progress != NULL) {
    cinfo->progress->pass_counter = (long) cinfo->next_scanline;
    cinfo->progress->pass_limit = (long) cinfo->image_height;
    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
  }

  /* Give master control module another chance if this is first call to
   * jpeg_write_raw_data.  This lets output of the frame/scan headers be
   * delayed so that application can write COM, etc, markers between
   * jpeg_start_compress and jpeg_write_raw_data.
   */
  if (cinfo->master->call_pass_startup)
    (*cinfo->master->pass_startup) (cinfo);

  /* Verify that at least one iMCU row has been passed. */
  lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
  if (num_lines < lines_per_iMCU_row)
    ERREXIT(cinfo, JERR_BUFFER_SIZE);

  /* Directly compress the row. */
  if (! (*cinfo->coef->compress_data) (cinfo, data)) {
    /* If compressor did not consume the whole row, suspend processing. */
    return 0;
  }

  /* OK, we processed one iMCU row. */
  cinfo->next_scanline += lines_per_iMCU_row;
  return lines_per_iMCU_row;
}


/*
 * Finish JPEG compression.
 *
 * If a multipass operating mode was selected, this may do a great deal of
 * work including most of the actual output.
 */

GLOBAL (void)
jpeg_finish_compress (j_compress_ptr cinfo)
{
  JDIMENSION iMCU_row;

  if (cinfo->global_state == CSTATE_SCANNING ||
      cinfo->global_state == CSTATE_RAW_OK) {
    /* Terminate first pass */
    if (cinfo->next_scanline < cinfo->image_height)
      ERREXIT(cinfo, JERR_TOO_LITTLE_DATA);
    (*cinfo->master->finish_pass) (cinfo);
  } else if (cinfo->global_state != CSTATE_WRCOEFS)
    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
  /* Perform any remaining passes */
  while (! cinfo->master->is_last_pass) {
    (*cinfo->master->prepare_for_pass) (cinfo);
    for (iMCU_row = 0; iMCU_row < cinfo->total_iMCU_rows; iMCU_row++) {
      if (cinfo->progress != NULL) {
	cinfo->progress->pass_counter = (long) iMCU_row;
	cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows;
	(*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
      }
      /* We bypass the main controller and invoke coef controller directly;
       * all work is being done from the coefficient buffer.
       */
      if (! (*cinfo->coef->compress_data) (cinfo, (JSAMPIMAGE) NULL))
	ERREXIT(cinfo, JERR_CANT_SUSPEND);
    }
    (*cinfo->master->finish_pass) (cinfo);
  }
  /* Write EOI, do final cleanup */
  (*cinfo->marker->write_file_trailer) (cinfo);
  (*cinfo->dest->term_destination) (cinfo);
  /* We can use jpeg_abort to release memory and reset global_state */
  jpeg_abort((j_common_ptr) cinfo);
}


/*
 * Write a special marker.
 * This is only recommended for writing COM or APPn markers.
 * Must be called after jpeg_start_compress() and before
 * first call to jpeg_write_scanlines() or jpeg_write_raw_data().
 */

GLOBAL (void)
jpeg_write_marker (j_compress_ptr cinfo, int marker,
		   const JOCTET *dataptr, unsigned int datalen)
{
  if (cinfo->next_scanline != 0 ||
      (cinfo->global_state != CSTATE_SCANNING &&
       cinfo->global_state != CSTATE_RAW_OK &&
       cinfo->global_state != CSTATE_WRCOEFS))
    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);

  (*cinfo->marker->write_any_marker) (cinfo, marker, dataptr, datalen);
}


/*
 * Alternate compression function: just write an abbreviated table file.
 * Before calling this, all parameters and a data destination must be set up.
 *
 * To produce a pair of files containing abbreviated tables and abbreviated
 * image data, one would proceed as follows:
 *
 *		initialize JPEG object
 *		set JPEG parameters
 *		set destination to table file
 *		jpeg_write_tables(cinfo);
 *		set destination to image file
 *		jpeg_start_compress(cinfo, FALSE);
 *		write data...
 *		jpeg_finish_compress(cinfo);
 *
 * jpeg_write_tables has the side effect of marking all tables written
 * (same as jpeg_suppress_tables(..., TRUE)).  Thus a subsequent start_compress
 * will not re-emit the tables unless it is passed write_all_tables=TRUE.
 */

GLOBAL (void)
jpeg_write_tables (j_compress_ptr cinfo)
{
  if (cinfo->global_state != CSTATE_START)
    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);

  /* (Re)initialize error mgr and destination modules */
  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
  (*cinfo->dest->init_destination) (cinfo);
  /* Initialize the marker writer ... bit of a crock to do it here. */
  jinit_marker_writer(cinfo);
  /* Write them tables! */
  (*cinfo->marker->write_tables_only) (cinfo);
  /* And clean up. */
  (*cinfo->dest->term_destination) (cinfo);
  /* We can use jpeg_abort to release memory. */
#ifndef NIFTY
  jpeg_abort((j_common_ptr) cinfo);
#endif
}