; SCSI.INF -- This file contains descriptions of all the SCSI ; Host Adapters supported in Windows NT ; Copyright (c) 1993-1997, Microsoft Corporation [version] signature="$Windows NT$" Class=SCSIAdapter ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318} Provider=%Msft% LayoutFile=layout.inf ; Class Install [ClassInstall32.NT] Addreg=SCSIReg [SCSIReg] HKR,,,,%SCSIClassName% HKR,,Installer32,,"SysSetup.Dll,ScsiClassInstaller" HKR,,Icon,,"-10" HKR,,LegacyInfOption,,"SCSI" HKR,,DeviceType,0x10001,4 ; FILE_DEVICE_CONTROLLER HKR,,DeviceCharacteristics,0x10001,0x100 ; Use same security checks on relative opens [DestinationDirs] DefaultDestDir = 12 ; DIRID_DRIVERS [Manufacturer] %ADP%=ADAPTEC %COMPAQ%=COMPAQ %MYLEX%=MYLEX %UNSUP%=UNSUP ;****************** ;Adaptec Manufacturer list [ADAPTEC] %aha154x.DeviceDesc% = aha154x_Inst, ,DETECTED\aha154x %sparrow.DeviceDesc% = sparrow_Inst, ,DETECTED\sparrow ; ; Aha 154x ; [aha154x_Inst] CopyFiles = @aha154x.sys LogConfig = *ADP1540.LogConfig [aha154x_Inst.Services] AddService = aha154x, %SPSVCINST_ASSOCSERVICE%, aha154x_Service_Inst, Miniport_EventLog_Inst [aha154x_Service_Inst] ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_BOOT_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\aha154x.sys LoadOrderGroup = SCSI Miniport AddReg = pnpsafe_isa_addreg AddReg = pnpsafe_mca_addreg [*ADP1540.LogConfig] ConfigPriority = HARDRECONFIG IOConfig = 130-133(3FF::),230-233(3FF::),330-333(3FF::),134-137(3FF::),234-237(3FF::),334-337(3FF::) IRQConfig = 9,10,11,12,14,15 DMAConfig = W:5,6,7 ; ; AIC6x60 (sparrow) ; [sparrow_Inst] CopyFiles = @sparrow.sys LogConfig = *ADP6360.LogConfig,6x60.lc2 [sparrow_Inst.Services] AddService = sparrow, %SPSVCINST_ASSOCSERVICE%, sparrow_Service_Inst, Miniport_EventLog_Inst [sparrow_Service_Inst] ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_BOOT_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\sparrow.sys LoadOrderGroup = SCSI Miniport AddReg = pnpsafe_isa_addreg [*ADP6360.LogConfig] ConfigPriority=HARDRECONFIG IOConfig=140-15f,340-35f IRQConfig=9,10,11,12 [6x60.lc2] ConfigPriority=HARDRECONFIG IOConfig=140-15f,340-35f IRQConfig=9,10,11,12,15 ;******************************* ;Compaq Manufacturer device list [COMPAQ] %cpqarray.DeviceDesc% = cpqarray_Inst, ,DETECTED\cpqarray #if (PRODSWITCH != 'w' && PRODSWITCH != 'p') %cpqfcalm.DeviceDesc% = cpqfcalm_Inst, ,DETECTED\cpqfcalm #endif [cpqarray_Inst] CopyFiles = @cpqarray.sys [cpqarray_Inst.Services] AddService = cpqarray, %SPSVCINST_ASSOCSERVICE%, cpqarray_Service_Inst, Miniport_EventLog_Inst [cpqarray_Service_Inst] ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_BOOT_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\cpqarray.sys LoadOrderGroup = SCSI Miniport AddReg = pnpsafe_eisa_addreg AddReg = pnpsafe_pci_addreg AddReg = bus_type_raid AddReg = eisa_legacy_addreg #if (PRODSWITCH != 'w' && PRODSWITCH != 'p') [cpqfcalm_Inst] CopyFiles = @cpqfcalm.sys [cpqfcalm_Inst.Services] AddService = cpqfcalm, %SPSVCINST_ASSOCSERVICE%, cpqfcalm_Service_Inst, Miniport_EventLog_Inst [cpqfcalm_Service_Inst] ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_BOOT_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\cpqfcalm.sys LoadOrderGroup = SCSI Miniport AddReg = pnpsafe_pci_addreg AddReg = pnpsafe_eisa_addreg AddReg = bus_type_fibre AddReg = eisa_legacy_addreg #endif ;****************************** ;Mylex Manufacturer device list [MYLEX] %dac960.DeviceDesc% = dac960nt_Inst, ,DETECTED\dac960nt [dac960nt_Inst] CopyFiles = @dac960nt.sys [dac960nt_Inst.Services] AddService = dac960nt, %SPSVCINST_ASSOCSERVICE%, dac960nt_Service_Inst, Miniport_EventLog_Inst [dac960nt_Service_Inst] ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_BOOT_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\dac960nt.sys LoadOrderGroup = SCSI Miniport AddReg = pnpsafe_pci_addreg AddReg = pnpsafe_eisa_addreg AddReg = bus_type_raid AddReg = eisa_legacy_addreg ;************************************************************* ;These addreg sections should be used when installing services to indicate ;which interface types are safe for PNP and which aren't. INTERFACE_TYPE ;is defined in NTDDK.H [pnpsafe_pci_addreg] HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001 [pnpsafe_isa_addreg] HKR, "Parameters\PnpInterface", "1", 0x00010001, 0x00000001 [pnpsafe_eisa_addreg] HKR, "Parameters\PnpInterface", "2", 0x00010001, 0x00000001 [pnpsafe_mca_addreg] HKR, "Parameters\PnpInterface", "3", 0x00010001, 0x00000001 [pnpsafe_pcmcia_addreg] ; isa with no legacy detection HKR, "Parameters\PnpInterface", "1", 0x00010001, 0x00000011 [pcmcia_interface_type] HKR, "ScsiPort", "LegacyInterfaceType", 0x00010001, 0x00000008 [eisa_legacy_addreg] HKR, "Parameters", "LegacyAdapterDetection", 0x00010001, 0x00000001 ;************************************************************* ;These addreg sections should be used for non-SCSI miniports ;to indicate what STORAGE_BUS_TYPE they actually do support. [bus_type_ide] HKR, "Parameters", "BusType", 0x00010001, 0x00000003 [bus_type_fibre] HKR, "Parameters", "BusType", 0x00010001, 0x00000006 [bus_type_raid] HKR, "Parameters", "BusType", 0x00010001, 0x00000008 ;************************************************************* ;The EventLog entries are the same for all SCSI miniports. [Miniport_EventLog_Inst] AddReg = Miniport_EventLog_AddReg [Miniport_EventLog_AddReg] HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll" HKR,,TypesSupported,%REG_DWORD%,7 ; ; The UNSUP section contains entries for SCSI adapters that are no longer officially shipped ; as in-box drivers. On upgrade from a previous OS version, we do not want to block setup ; that are known to function fine, but are no longer in-box. An entry in the section below ; ensures that the drivers will not be removed by PNP. ; [UNSUP] %fireport.DeviceDesc% = fireport_Inst, PCI\VEN_1000&DEV_008F %buslogic.DeviceDesc% = buslogic_Inst, BUSLOGIC_SCSI %detected_buslogic.DeviceDesc% = buslogic_Inst, , DETECTED\buslogic %*BUS0042.DeviceDesc% = buslogic_Inst, *BUS0042 %PCI\VEN_104B&DEV_1040.DeviceDesc% = buslogic_Inst, PCI\VEN_104B&DEV_1040 %flashpnt.DeviceDesc% = flashpnt_Inst, FLASHPNT_SCSI %flashpnt.DeviceDesc% = flashpnt_Inst, PCI\VEN_104B&DEV_8130 %cpqfws2e.DeviceDesc% = cpqfws2e_Inst, CPQFWS2E_SCSI %detected_cpqfws2e.DeviceDesc% = cpqfws2e_Inst, ,DETECTED\cpqfws2e %aha2920.DeviceDesc% = fd16_700_Inst, *FDC0000 %detected_aha2920.DeviceDesc% = fd16_700_Inst, , DETECTEDPci\Fd16_700 %fd16_700.DeviceDesc% = fd16_700_Inst, FD16_700_SCSI %FD16ISA% = fd16_700_Inst, *FDC0000 %FD16MCA% = fd16_700_Inst, *FDC0000 %FD16PCMCIANEW% = fd16_700_Inst, PCMCIA\Future_Domain_Corporation-SCSI_PCMCIA_Credit_Card_Controller-1BF8 %FD16PCI% = fd16_700_Inst, PCI\VEN_1036&DEV_0000 %detected_fd16_700.DeviceDesc% = fd16_700_Inst, , DETECTED\fd16_700 %*CPQ4410.DeviceDesc% = ncrc710_Inst, *CPQ4410 %*CPQ4411.DeviceDesc% = ncrc710_Inst, *CPQ4411 %ncrc710.DeviceDesc% = ncrc710_Inst, NCRC710_SCSI %detected_ncrc710.DeviceDesc% = ncrc710_Inst, ,DETECTED\ncrc710 %PCI\VEN_1103&DEV_0004&SUBSYS_00051103&REV_03.DeviceDesc% = hpt3xx_Inst, PCI\VEN_1103&DEV_0004&SUBSYS_00051103&REV_03 %PCI\VEN_1103&DEV_0004&SUBSYS_00011103&REV_03.DeviceDesc% = hpt3xx_Inst, PCI\VEN_1103&DEV_0004&SUBSYS_00011103&REV_03 %PCI\VEN_1103&DEV_0004&SUBSYS_00011103&REV_04.DeviceDesc% = hpt3xx_Inst, PCI\VEN_1103&DEV_0004&SUBSYS_00011103&REV_04 ; ; fireport ; [fireport_Inst] [fireport_Inst.Services] [fireport_Service_Inst] ; ; buslogic ; [buslogic_Inst] [buslogic_Inst.Services] [buslogic_Service_Inst] ; ; flashpnt ; [flashpnt_Inst] [flashpnt_Inst.Services] [flashpnt_Service_Inst] ; ; cpqfws2e ; [cpqfws2e_Inst] [cpqfws2e_Inst.Services] [cpqfws2e_Service_Inst] ; ; fd16_700 ; [fd16_700_Inst] [fd16_700_Inst.Services] [fd16_700_Service_Inst] ; ; ncrc710 ; [ncrc710_Inst] [ncrc710_Inst.Services] [ncrc710_Service_Inst] ; ; hpt3xx ; [hpt3xx_Inst] [hpt3xx_Inst.Services] [hpt3xx_Service_Inst]