;***********************************************************************
;
; OEMNADE3.INF
;
;       Elink 3 network card and driver SETUP INF file.
;
; History:
;       davidhov        00-Feb-1992     Created
;       terryk          27-Feb-1992     Reorganize section location
;                                       added comment
;       terryk          03-Mar-1992     Changed to Elink II setup
;       terryk          02-Apr-1992     Code review changed
;       davidhov        03-Apr-1992     Enhanced to use new INF section
;                                       structure from SunilP, et al.
;       davidhov        06-Dec-1992     Netcard Detection
;***********************************************************************

;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with.  The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
;  Types specific to networking:
;
; NetAdapter,        a netcard / adapter combination or just a netcard
; NetDriver,         just a netcard driver
; NetTransport,      a complete NDIS-compliant TDI transport stack
; NetService,        an NT networking service
; NetWork,           a complete network ensemble.
; NetProvider        a complete network which supports NT MPR protocol
;-----------------------------------------------------------------------

[Identification]
    OptionType = NetAdapter

;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA and MCA
;-----------------------------------------------------------------------

[PlatformsSupported]
    ISA
    EISA
    PCMCIA
    "Jazz-Internal Bus"

;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names.  These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------

[Options]
    ELNK3ISA509

;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************

[FileConstants]
;
;  File names, etc.
;
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0

;
; EventLog Message File
;
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"

; Product Info
;
Manufacturer    = "Microsoft"
ProductMajorVersion     = "4"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Software
;
ProductSoftwareName     = "Elnk3"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\elnk3.sys"
NetRuleSoftwareType     = "elnk3Sys ndisDriver elnk3Driver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """Elnk3Sys"" yes no container"
NetRuleSoftwareClass    = {"elnk3Driver basic"}
NetRuleSoftwareBindable = {"elnk3Driver elnk3Adapter non exclusive 100"}
;
; Hardware
;
ProductHardwareName     = "Elnk3"
NetRuleHardwareType     = "elnk3 elnk3Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"elnk3Adapter basic"}
ProductOpSupport     = 134 ; 0x0086 ; Display,Removable,Properties,Not Updatable
;
; Registry Key
;
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"


[GeneralConstants]
;
;  Program flow control variables.
;
from      = ""
to        = ""
;
;  Return codes; Exit_Code is set to one of these
;
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2

KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""

TRUE            = 1
FALSE           = 0
NoTitle            = 0

ExitState   = "Active"
OldVersionExisted = $(FALSE)

DriverPath      = $(!STF_NTPATH)\drivers

[date]
    ; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
    ; Minute, Second }
    Now = {} ? $(!LIBHANDLE) GetSystemDate


;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION:   To verify that this INF deals with the same type of options
;                as we are choosing currently.
;
; INPUT:         None
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL
;                $($R1): Option Type (COMPUTER ...)
;                $($R2): Diskette description
;---------------------------------------------------------------------------

[Identify]
    ;
    ;
    read-syms Identification

    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)

    Return $(Status) $(Identifier) $(Media)

;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION:   To return the option list supported by this INF and the
;                localised text list representing the options.
;
;
; INPUT:         $($0):  Language used. ( ENG | FRN | ... )
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL |
;                                STATUS_NOLANGUAGE
;                                STATUS_FAILED
;                                STATUS_NOTSUPPORTED
;
;                $($R1): Option List
;                $($R2): Option Text List
;------------------------------------------------------------------------

[ReturnOptions]
    ;
    ;
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ;
        ; Check if the platforms requested is supported
        ;
        ifstr(i) $($1) == ""
                        goto returnoptions
        endif

        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
                        goto returnoptions
        else
                        set Status = STATUS_NOTSUPPORTED
                        goto finish_ReturnOptions
        endif
    else
                set Status = STATUS_NOLANGUAGE
                goto finish_ReturnOptions
    endif

    ;
    ; form a list of all the options and another of the text representing
    ;

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

;------------------------------------------------------------------------
;
; InstallOption:
;
;      This section is shelled to by main installation processing
;      or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION:  To copy files representing Options
;            To configure the installed option
;            To update the registry for the installed option
;
; INPUT:     $($0):  Language to use
;            $($1):  OptionID to install
;            $($2):  SourceDirectory
;            $($3):  AddCopy  (YES | NO)
;            $($4):  DoCopy   (YES | NO)
;            $($5):  DoConfig (YES | NO)
;
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;                            STATUS_NOLANGUAGE |
;                            STATUS_USERCANCEL |
;                            STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
    ;
    ; Set default values for
    ;
    set Status   = STATUS_FAILED
    ;
    ; extract parameters
    ;
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif

    set-subst LF = "\n"

    read-syms GeneralConstants
    read-syms FileConstants

    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)

    detect date

    set-title  $(FunctionTitle)

    set to   = Begin
    set from = Begin
;
;  Assume all is well.
;
    set CommonStatus = STATUS_SUCCESSFUL

    EndWait

;
;   Set up the operation-mode-based variables and gaily welcome
;   the user.  If the "install mode" variable is improperly set,
;   assume this is a new installation.
;

Begin = +
    Set ActivateDetection = FALSE

    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set CommonStatus = STATUS_REBOOT
        set ActivateDetection = TRUE
        set StartLabel = configureadapter
        ;
        ;   You cannot config the software component
        ;
        Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
            Debug-Output "Cannot configure the Elink II driver software."
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error: cannot get an error string."
                goto ShellCodeError
            endif
            set Error = $($R0)
            set from = end
            set to = end
            goto nonfatalinfo
        endif
    else
        set ActivateDetection = TRUE
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif


    ;===================================================
    ;  Netcard Detection logic
    ;
    ;  Initialize use of netcard detection;
    ;  Construct require global parameter variables
    ;
    Debug-Output "oemnade3.INF: =================================================="
    Debug-Output "oemnade3.INF: STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output "oemnade3.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    Debug-Output "oemnade3.INF: Option is: "$(Option)
    Debug-Output "oemnade3.INF: !STF_NCDETECT  is: "$(!STF_NCDETECT)
    Debug-Output "oemnade3.INF: !STF_NCOPTION  is: "$(!STF_NCOPTION)
    Debug-Output "oemnade3.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
    Debug-Output "oemnade3.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
    Debug-Output "oemnade3.INF: =================================================="

    Set DetectedCard = FALSE
    set PCMCIA = 0

    Ifstr(i) $(ActivateDetection) != TRUE
        Goto $(StartLabel)
    Endif
    set Transceiver = 0
    set CardType = 0

    ;
    ;  Set !STF_NC_PARAMS and !STF_NC_PNAMES by calling
    ;    PARAM.INF!Param_BuildTypeLists.
    ;   Pass it a list of the form:
    ;
    ;   {  { <param name>,
    ;        <name of choice list var>,
    ;        <name of default var> },
    ;      ...
    ;   }
    ;
    Set TypeList = {{IRQ, IRQList, IRQValue},+
                    {PCMCIA, PCMCIAList, PCMCIA},+
                    {CARDTYPE, CardTypeList, CardType},+
                    {IOADDR, IOADDR_Addr_List, IOBaseAddrValue},+
                    {TRANSCEIVER, TransceiverList_ignore, Transceiver}}

    Debug-Output "oemnade3.INF: Calling Param_BuildTypeLists"
    Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
    Set Status = $($R0)
    ifstr(i) $(Status) != STATUS_SUCCESSFUL
        Goto fataldetect
    Endif

    Debug-Output "oemnade3.INF: Calling Param_SetDefaults"
    Shell $(ParamInf) Param_SetDefaults {{IOADDR,768},{IRQ,10}}

    ;  Establish presentation versions of choice lists.

    Shell $(ParamInf) HexListFromDecList $(IOADDR_Addr_List)
    Set IOADDR_Hex_List = $($R0)

    Shell $(UtilityInf) SortList $(IRQList) TRUE FALSE
    Set IRQList = $($R0)

    ;  If this is a detected card, set the flag.

    Ifstr(i) $(!STF_NCDETECT) == YES
        Ifstr(i) $(!STF_NCOPTION) == $(Option)
           Set DetectedCard = TRUE
           Debug-Output "oemnade3.INF: Setting DetectedCard to TRUE"
        Endif
    Endif
    ;
    ;  End Netcard Detection logic
    ;===================================================

    Shell "" DebugConfiguration "After parameter querying"

    Set from = $(fatal)
    Set to = $(fatal)
    Goto $(StartLabel)

;-----------------------------------------------
; Installation Section
;-----------------------------------------------

installadapter = +
;
;   First, check whether the same version of the software exists
;
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)
        ;
        ; Same version already existed in the local machine
        ; Popup the dialog and ask the user whether he wants to continue
        ;
        CloseRegKey $(KeyProduct)

        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           ;
           ; Cannot Install the same software again
           ;
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif

           goto end
        else
           ;
           ; Add a new adapter card?
           ;
           Shell $(UtilityInf), CardExistedDlg

           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif

           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    endif

    ;===================================================
    ;  Netcard Detection logic
    ;
    ;   If this is a detected card, query its parameters
    ;   and merge them into the default list.
    ;

    ;  Indicate that there are no old parameter settings.

    Set CurrParamSettings = {}

    Ifstr(i) $(DetectedCard) != TRUE
        Goto adaptersetup
    Endif
    ;
    ;   Get the detected parameters
    ;
    StartWait
    Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
    EndWait
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
        Goto adaptersetup
    Endif
    ;
    ;   Merge the detected values in.
    ;
    Set DetectedParams = $($R1)
    Debug-Output "oemnade3.INF: Calling Param_SetDefaults to merge detected params"
    Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
    ;
    ;  End Netcard Detection logic
    ;===================================================

    goto adaptersetup

;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
;   Get the current values of all the parameters
;
configureadapter = +
    Ifstr $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Debug-Output "Cannot find component product key"
            goto fatalregistry
        Endif
    Endif

    ;
    ; Get the other parameters;  they're attached to the service parameters key
    ;
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "INF: FindService shell failure"
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Debug-Output "INF: FindService Shell error: "$($R0)
        Goto fatalregistry
    endif

    Set KeyParameters = $($R2)

    ;
    ;  We don't need the services key, so close it.
    ;
    CloseRegKey $($R1)

    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Debug-Output "Cannot find component service"
        goto fatalregistry
    endif

    set OldVersionExisted = $(TRUE)

    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}

    ;
    ; Get the old values
    ;
    EnumRegValue $(KeyParameters) ValueList

    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        Ifstr(i) $(ValueName) == "IoBaseAddress"
            set IOBaseAddrValue = $(ValueData)
        else-ifstr(i) $(ValueName) == "InterruptNumber"
            set IRQValue = $(ValueData)
        else-ifstr(i) $(ValueName) == "BusType"
            set BusInterfaceType = $(ValueData)
        else-ifstr(i) $(ValueName) == "PCMCIA"
            set PCMCIA = $(ValueData)
        else-ifstr(i) $(ValueName) == "Transceiver"
            set Transceiver = $(ValueData)
        else-ifstr(i) $(ValueName) == "BusNumber"
            set BusNumber = $(ValueData)
        endif

    EndForListDo

    ;  Save the settings as they were read from the Registry.

    Shell $(ParamInf) Param_SaveValues
    Set CurrParamSettings = $($R0)
;
;   Put up the adapter configuration dialog if necessary.
;
;   Note that $(CurrParamSettings) has the old known parameter values.
;
adaptersetup = +

    Shell "" DebugConfiguration "before displaying dialog"

    Set from = adapteroptions

    Set IOADDR_Hex_Value = *($(IOADDR_Hex_List), ~($(IOADDR_Addr_List),$(IOBaseAddrValue)))
    set-add Transceiver = $(Transceiver),1
    set TransceiverValue = *($(TransceiverList), $(Transceiver))

    ;===================================================
    ;  Netcard Detection logic
    ;
    ;   Check that this card's parameters can be
    ;   fully detected.
    ;
    Shell $(ParamInf) Param_ParameterConfidence
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
        Debug-Output "oemnade3.INF: parameter confidence too low to bypass configuration"
        Goto adapteroptions
    Endif
    ;
    ;   If this is a detected card and we're in EXPRESS mode,
    ;   see if the parameters as they currently exist are
    ;   verifiably correct.
    ;
    Ifstr(i) $(DetectedCard) == TRUE
        Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
            ; use the STF_NCDETINFO information
            set BusInterfaceType = *($(!STF_NCDETINFO),5)
            set BusNumber = *($(!STF_NCDETINFO),6)

            Goto adapterverify
        Endif
    Endif
    ;
    ;  End Netcard Detection logic
    ;===================================================

adapteroptions = +

    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        ifstr(i) $(!AutoNetInterfaceType) != ""
            set BusInterfaceType = $(!AutoNetInterfaceType)
            ;
            ; hack, until we get plug n play, 
            ;
            ifint $(BusInterfaceType) == 8
                set PCMCIA = 1
            endif
        else
            set BusInterfaceType = 1    ;ISA
        endif
        ifstr(i) $(!AutoNetBusNumber) != ""
            set BusNumber = $(!AutoNetBusNumber)
        else
            set BusNumber = 0
        endif
        goto adapterverify
    endif

    read-syms FileDependentDlg$(!STF_LANGUAGE)

    ui start "InputDlg"

    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set IOADDR_Hex_Value = $(Combo1Out)
        Set IOBaseAddrValue = *($(IOADDR_Addr_List), ~($(IOADDR_Hex_List),$(IOADDR_Hex_Value)))
        set IRQValue = $(Combo2Out)
        set Transceiver = ~($(TransceiverList),$(Combo3Out))

        ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
        set CommonStatus = STATUS_USERCANCEL
        Debug-Output "Action: exit. Bye."
        ui pop 1
        goto end
    else
        Debug-Output "Action: unknown. Bye."
        ui pop 1
        goto end
    endif


    ifstr(i) $(!STF_NCDETINFO) == {}
        ifint $(PCMCIA) != 1
            ; not detect. popup dialog.
            Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
            endif
        
            set BusInterfaceType = $($R1)
            set BusNumber = $($R2)
        else
            set BusInterfaceType = 1
            set BusNumber = 0
        endif
    else
        ; use the STF_NCDETINFO information
        set BusInterfaceType = *($(!STF_NCDETINFO),5)
        set BusNumber = *($(!STF_NCDETINFO),6)
    endif

adapterverify = +

    set-sub Transceiver = $(Transceiver),1

    Shell "" DebugConfiguration "after running dialog"

    ;===================================================
    ;  Netcard Detection logic
    ;
    ;   If this is a detected card, attempt to validate the options
    ;   If just a normal card, try to claim the resources which have
    ;     changed.
    ;
    Ifstr(i) $(DetectedCard) != TRUE

        ;  Build the current parameter list.  If this is an installation,
        ;  (indicated by the fact that the current settings list is empty)
        ;  claim all the parameters; otherwise, just claim those which
        ;  have changed.

        Shell $(ParamInf) Param_SaveValues
        Set NewParamSettings = $($R0)
        Ifstr(i) $(CurrParamSettings) == {}
            Set DiffParamSettings = $(NewParamSettings)
        Else
            Shell $(ParamInf) Param_DiffValues $(CurrParamSettings)
            Set DiffParamSettings = $($R0)
        Endif

        Debug-Output "oemnade3.INF: Calling Param_VerifyResources"
        Shell $(ParamInf) Param_VerifyResources $(DiffParamSettings)
        Ifstr(i) $($R0) == STATUS_SUCCESSFUL
            Debug-Output "oemnade3.INF: Param_VerifyResources succeeded"
            Goto skipoptions
        Endif
    Else
        Set CardVerifyIndex = $(!STF_NCDETCARD)
        Debug-Output "oemnade3.INF: Calling Param_VerifyCard"
        Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
        Ifstr(i) $($R0) == STATUS_SUCCESSFUL
            Debug-Output "oemnade3.INF: Param_VerifyCard succeeded"
            Goto skipoptions
        Endif
    Endif
    ;
    ;   Give the user a chance to retry or force the options given.
    ;
    Set from = adapteroptions
    Set to = skipoptions
    Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto Warning
    ;
    ;  End Netcard Detection logic
    ;===================================================

;
;   If installing, go create the necessary keys;
;   if configuring, they're already open.
;
skipoptions =+

    ifint $(OldVersionExisted) == $(TRUE)
        ifstr(i) $(!NTN_InstallMode) == configure
            goto writeparameters
        endif
    endif
    StartWait
    ;
    ; Add Software Component
    ;
    ifint $(OldVersionExisted) == $(FALSE)
        ifstr(i) $(!NTN_InstallMode) == "install"
           Ifstr(i) $(DoCopy) == "YES"

              Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES

              Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  Goto ShellCodeError
              Else-Ifstr(i) $($R0) == STATUS_FAILED
                  Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                  ifint $($ShellCode) != $(!SHELL_CODE_OK)
                      goto ShellCodeError
                  endif
                  set Error = $($R0)
                  Goto fatal
              Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                  Goto successful
              Endif

              Set SrcDir = $($R1)

           Endif

           install "Install-Option"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
              Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
              ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
              endif
              set Error = $($R0)
              goto fatal
           endif
        endif

        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)

        Set OEM_ABANDON_SOFTWARE = TRUE

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        ;
        ;   At this point:
        ;     $R1 contains the product version key handle;
        ;     $R2 contains the NetRules subkey handle;
        ;     $R3 contains the new Services key handle; and
        ;     $R4 contains the Parameters key
        ;     $R5 contains the Linkage Key
        ;
        set RegistryErrorIndex = $($R0)
        set KeyProduct      = $($R1)
        Set SoftNetRulesKey = $($R2)
        CloseRegKey $($R3)
        CloseRegKey $($R4)
        CloseRegKey $($R5)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "Registry error: add software components"
            CloseRegKey $(KeyProduct)
            CloseRegKey $(SoftNetRulesKey)
            goto fatalregistry
        endif

        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

        Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error."
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "Registry error: add value list."
            CloseRegKey $(KeyProduct)
            CloseRegKey $(SoftNetRulesKey)
            goto fatalregistry
        endif

        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

        Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error."
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "Resgitry error: add value list."
            goto fatalregistry
        endif
    endif
;
;   Create the HARDWARE\Netcard region and its corresponding service
;
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)

    ifint $($R4) != -1
        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "Cannot add hardware component"
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Registry error: add hardware component"
        CloseRegKey $($R1)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        goto fatalregistry
    endif

;
;   At this point:
;     $R1  Registry key variable for HARDWARE\Netcard\(n)
;     $R2  Registry key variable for HARDWARE\Netcard\(n)\\NetRules
;     $R3  Registry key handle for <service>\Parameters key
;     $R4  Adapter number assigned to adapter
;     $R5  Service name generated by combining svc name with adapter number
;
    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)

    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                       {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)},+
                       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif

    CloseRegKey $($R1)

    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output "Resgitry error: add value list."
        CloseRegKey $(KeyParameters)
        CloseRegKey $(KeyAdapterRules)
        goto fatalregistry
    endif

    CloseRegKey $(KeyAdapterRules)

    goto writeparameters
;
;   REQUIRED:   $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
;
;   Add the rest of the parameters to the Services area
;
    ifint $(BusInterfaceType) == 8
        set PCMCIA = 1
        ;
        ; Hack, remove it if we have plug and play
        ;
        set BusInterfaceType = 1
    endif
    ifint $(PCMCIA) == 1
        set CardType = 3
    endif
    Set NewValueList = {+
                       {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
                       {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                       {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
                       {CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+
                       {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                       {Transceiver,$(NoTitle),$(!REG_VT_DWORD),$(Transceiver)},+
                       {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}}

    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)

    ifint $(PCMCIA) == 1
        set NewValueList = {{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1}}

        Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    else
        DeleteRegValue $(KeyParameters) "Pcmcia"
    endif

    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
    endif

    CloseRegKey $(KeyParameters)

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error."
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        Debug-Output "Registry error: Add value list"
        goto fatalregistry
    endif

    EndWait

    goto successful

;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------

removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        ; Remove Software Component
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif

    goto end

;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------

UpgradeSoftware = +
    ; Upgrade software component
    ;
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)

        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif

        ; Upgrade the version number
        ;
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}

        ;
        ; do nothing for update
        ;
        CloseRegKey $(KeyProduct)
    else
        ;
        ; Cannot Open software key, goto ERROR
        ;
        goto fatalregistry
    endif

    ;
    ; Enumerate all netcards installed of this type and update them
    ;
    set iSearch = 1
nextnetcard = +
    Shell $(UtilityInf), FindNextNetworkCard, $(ProductHardwareName), $(iSearch)
    set KeyNetcard = $($R0)
    set iSearch = $($R1)
    Debug-Output "OemNadEp.Inf: FindNextNetworkCard "$(KeyNetcard)","$(iSearch)
    Ifstr $(KeyNetcard) != $(KeyNull)
        Debug-Output "OemNadEp.Inf: Setting OperationsSupport value"
        SetRegValue $(KeyNetcard) {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)}
        CloseRegKey $(KeyNetcard)

        goto nextnetcard
    Endif

    goto end
    ;
    ; End of Upgrade Software
    ;

;
;  Escape hatches
;
successful = +
    goto end

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo

    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        ; Remove Software Component
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif

    goto end

;
; warning display
;
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
;
; non fatal error display
;
nonfatalinfo = +
    Set Severity = STATUS
    Set CommonStatus = STATUS_USERCANCEL
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif

;
;  Registry is broken
;
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
;
;  Netcard detection failure
;
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
;
; fatal error display
;
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    goto setfailed

;
;  Shelling error
;
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    ;
    ; if OEM_ABANDON_ON == TRUE, then remove the registry entries
    ;
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end

end = +
    goto term

term = +

    Return $(CommonStatus)

[DebugConfiguration]

    Set InfName = "oemnade3.INF"
    Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
    Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)

    return


;***************************************************************
;  INSTALL SECTIONS
;***************************************************************
[Install-Option]
    set STF_VITAL = ""

    ifstr(i) $(AddCopy) == "YES"

        ;
        ; Add the files to the copy list
        ;
        ;  BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
        ;      the other INF files
        ;
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers

    endif

    ifstr(i) $(DoCopy) == "YES"

       ;
       ; Copy files in the copy list
       ;
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList

    endif

    Exit

[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   ;set STF_VERSION     = "YES"

   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers

   exit