1282 lines
25 KiB
OpenEdge ABL
1282 lines
25 KiB
OpenEdge ABL
/*++
|
|
|
|
Copyright (c) Microsoft Corporation. All rights reserved.
|
|
|
|
Module Name:
|
|
|
|
srb.h
|
|
|
|
Abstract:
|
|
|
|
This file defines the interface between SCSI mini-port drivers and the
|
|
SCSI port driver. It is also used by SCSI class drivers to talk to the
|
|
SCSI port driver.
|
|
|
|
Author:
|
|
|
|
Mike Glass
|
|
|
|
Notes:
|
|
|
|
Revision History:
|
|
|
|
--*/
|
|
|
|
#ifndef _NTSRB_
|
|
#define _NTSRB_
|
|
|
|
#if DBG
|
|
#define DebugPrint(x) ScsiDebugPrint x
|
|
#else
|
|
#define DebugPrint(x)
|
|
#endif
|
|
|
|
//
|
|
// Define SCSI maximum configuration parameters.
|
|
//
|
|
|
|
#define SCSI_MAXIMUM_LOGICAL_UNITS 8
|
|
#define SCSI_MAXIMUM_TARGETS_PER_BUS 128
|
|
#define SCSI_MAXIMUM_LUNS_PER_TARGET 255
|
|
#define SCSI_MAXIMUM_BUSES 8
|
|
#define SCSI_MINIMUM_PHYSICAL_BREAKS 16
|
|
#define SCSI_MAXIMUM_PHYSICAL_BREAKS 255
|
|
|
|
#define SCSI_COMBINE_BUS_TARGET( Bus, Target ) ( \
|
|
((((UCHAR) (Target)) & ~(0x20 - 1)) << 8) | \
|
|
(((UCHAR) (Bus)) << 5) | \
|
|
(((UCHAR) (Target)) & (0x20 - 1)))
|
|
|
|
#define SCSI_DECODE_BUS_TARGET( Value, Bus, Target ) ( \
|
|
Bus = (UCHAR) ((Value) >> 5), \
|
|
Target = (UCHAR) ((((Value) >> 8) & ~(0x20 - 1)) | ((Value) & (0x20 - 1))))
|
|
|
|
//
|
|
// This constant is for backward compatibility.
|
|
// This use to be the maximum number of targets supported.
|
|
//
|
|
|
|
#define SCSI_MAXIMUM_TARGETS 8
|
|
|
|
typedef PHYSICAL_ADDRESS SCSI_PHYSICAL_ADDRESS, *PSCSI_PHYSICAL_ADDRESS;
|
|
|
|
typedef struct _ACCESS_RANGE {
|
|
SCSI_PHYSICAL_ADDRESS RangeStart;
|
|
ULONG RangeLength;
|
|
BOOLEAN RangeInMemory;
|
|
}ACCESS_RANGE, *PACCESS_RANGE;
|
|
|
|
//
|
|
// Configuration information structure. Contains the information necessary
|
|
// to initialize the adapter. NOTE: This structure's must be a multiple of
|
|
// quadwords.
|
|
//
|
|
|
|
typedef struct _PORT_CONFIGURATION_INFORMATION {
|
|
|
|
//
|
|
// Length of port configuation information strucuture.
|
|
//
|
|
|
|
ULONG Length;
|
|
|
|
//
|
|
// IO bus number (0 for machines that have only 1 IO bus
|
|
//
|
|
|
|
ULONG SystemIoBusNumber;
|
|
|
|
//
|
|
// EISA, MCA or ISA
|
|
//
|
|
|
|
INTERFACE_TYPE AdapterInterfaceType;
|
|
|
|
//
|
|
// Interrupt request level for device
|
|
//
|
|
|
|
ULONG BusInterruptLevel;
|
|
|
|
//
|
|
// Bus interrupt vector used with hardware buses which use as vector as
|
|
// well as level, such as internal buses.
|
|
//
|
|
|
|
ULONG BusInterruptVector;
|
|
|
|
//
|
|
// Interrupt mode (level-sensitive or edge-triggered)
|
|
//
|
|
|
|
KINTERRUPT_MODE InterruptMode;
|
|
|
|
//
|
|
// Maximum number of bytes that can be transferred in a single SRB
|
|
//
|
|
|
|
ULONG MaximumTransferLength;
|
|
|
|
//
|
|
// Number of contiguous blocks of physical memory
|
|
//
|
|
|
|
ULONG NumberOfPhysicalBreaks;
|
|
|
|
//
|
|
// DMA channel for devices using system DMA
|
|
//
|
|
|
|
ULONG DmaChannel;
|
|
ULONG DmaPort;
|
|
DMA_WIDTH DmaWidth;
|
|
DMA_SPEED DmaSpeed;
|
|
|
|
//
|
|
// Alignment masked required by the adapter for data transfers.
|
|
//
|
|
|
|
ULONG AlignmentMask;
|
|
|
|
//
|
|
// Number of access range elements which have been allocated.
|
|
//
|
|
|
|
ULONG NumberOfAccessRanges;
|
|
|
|
//
|
|
// Pointer to array of access range elements.
|
|
//
|
|
|
|
ACCESS_RANGE (*AccessRanges)[];
|
|
|
|
//
|
|
// Reserved field.
|
|
//
|
|
|
|
PVOID Reserved;
|
|
|
|
//
|
|
// Number of SCSI buses attached to the adapter.
|
|
//
|
|
|
|
UCHAR NumberOfBuses;
|
|
|
|
//
|
|
// SCSI bus ID for adapter
|
|
//
|
|
|
|
UCHAR InitiatorBusId[8];
|
|
|
|
//
|
|
// Indicates that the adapter does scatter/gather
|
|
//
|
|
|
|
BOOLEAN ScatterGather;
|
|
|
|
//
|
|
// Indicates that the adapter is a bus master
|
|
//
|
|
|
|
BOOLEAN Master;
|
|
|
|
//
|
|
// Host caches data or state.
|
|
//
|
|
|
|
BOOLEAN CachesData;
|
|
|
|
//
|
|
// Host adapter scans down for bios devices.
|
|
//
|
|
|
|
BOOLEAN AdapterScansDown;
|
|
|
|
//
|
|
// Primary at disk address (0x1F0) claimed.
|
|
//
|
|
|
|
BOOLEAN AtdiskPrimaryClaimed;
|
|
|
|
//
|
|
// Secondary at disk address (0x170) claimed.
|
|
//
|
|
|
|
BOOLEAN AtdiskSecondaryClaimed;
|
|
|
|
//
|
|
// The master uses 32-bit DMA addresses.
|
|
//
|
|
|
|
BOOLEAN Dma32BitAddresses;
|
|
|
|
//
|
|
// Use Demand Mode DMA rather than Single Request.
|
|
//
|
|
|
|
BOOLEAN DemandMode;
|
|
|
|
//
|
|
// Data buffers must be mapped into virtual address space.
|
|
//
|
|
|
|
BOOLEAN MapBuffers;
|
|
|
|
//
|
|
// The driver will need to tranlate virtual to physical addresses.
|
|
//
|
|
|
|
BOOLEAN NeedPhysicalAddresses;
|
|
|
|
//
|
|
// Supports tagged queuing
|
|
//
|
|
|
|
BOOLEAN TaggedQueuing;
|
|
|
|
//
|
|
// Supports auto request sense.
|
|
//
|
|
|
|
BOOLEAN AutoRequestSense;
|
|
|
|
//
|
|
// Supports multiple requests per logical unit.
|
|
//
|
|
|
|
BOOLEAN MultipleRequestPerLu;
|
|
|
|
//
|
|
// Support receive event function.
|
|
//
|
|
|
|
BOOLEAN ReceiveEvent;
|
|
|
|
//
|
|
// Indicates the real-mode driver has initialized the card.
|
|
//
|
|
|
|
BOOLEAN RealModeInitialized;
|
|
|
|
//
|
|
// Indicate that the miniport will not touch the data buffers directly.
|
|
//
|
|
|
|
BOOLEAN BufferAccessScsiPortControlled;
|
|
|
|
//
|
|
// Indicator for wide scsi.
|
|
//
|
|
|
|
UCHAR MaximumNumberOfTargets;
|
|
|
|
//
|
|
// Ensure quadword alignment.
|
|
//
|
|
|
|
UCHAR ReservedUchars[2];
|
|
|
|
//
|
|
// Adapter slot number
|
|
//
|
|
|
|
ULONG SlotNumber;
|
|
|
|
//
|
|
// Interrupt information for a second IRQ.
|
|
//
|
|
|
|
ULONG BusInterruptLevel2;
|
|
ULONG BusInterruptVector2;
|
|
KINTERRUPT_MODE InterruptMode2;
|
|
|
|
//
|
|
// DMA information for a second channel.
|
|
//
|
|
|
|
ULONG DmaChannel2;
|
|
ULONG DmaPort2;
|
|
DMA_WIDTH DmaWidth2;
|
|
DMA_SPEED DmaSpeed2;
|
|
|
|
//
|
|
// Fields added to allow for the miniport
|
|
// to update these sizes based on requirements
|
|
// for large transfers ( > 64K);
|
|
//
|
|
|
|
ULONG DeviceExtensionSize;
|
|
ULONG SpecificLuExtensionSize;
|
|
ULONG SrbExtensionSize;
|
|
|
|
//
|
|
// Used to determine whether the system and/or the miniport support
|
|
// 64-bit physical addresses. See SCSI_DMA64_* flags below.
|
|
//
|
|
|
|
UCHAR Dma64BitAddresses; /* New */
|
|
|
|
//
|
|
// Indicates that the miniport can accept a SRB_FUNCTION_RESET_DEVICE
|
|
// to clear all requests to a particular LUN.
|
|
//
|
|
|
|
BOOLEAN ResetTargetSupported; /* New */
|
|
|
|
//
|
|
// Indicates that the miniport can support more than 8 logical units per
|
|
// target (maximum LUN number is one less than this field).
|
|
//
|
|
|
|
UCHAR MaximumNumberOfLogicalUnits; /* New */
|
|
|
|
//
|
|
// Supports WMI?
|
|
//
|
|
|
|
BOOLEAN WmiDataProvider;
|
|
|
|
} PORT_CONFIGURATION_INFORMATION, *PPORT_CONFIGURATION_INFORMATION;
|
|
|
|
//
|
|
// Version control for ConfigInfo structure.
|
|
//
|
|
|
|
#define CONFIG_INFO_VERSION_2 sizeof(PORT_CONFIGURATION_INFORMATION)
|
|
|
|
|
|
//
|
|
// Flags for controlling 64-bit DMA use (PORT_CONFIGURATION_INFORMATION field
|
|
// Dma64BitAddresses)
|
|
//
|
|
|
|
//
|
|
// Set by scsiport on entering HwFindAdapter if the system can support 64-bit
|
|
// physical addresses. The miniport can use this information before calling
|
|
// ScsiPortGetUncachedExtension to modify the DeviceExtensionSize,
|
|
// SpecificLuExtensionSize & SrbExtensionSize fields to account for the extra
|
|
// size of the scatter gather list.
|
|
//
|
|
|
|
#define SCSI_DMA64_SYSTEM_SUPPORTED 0x80
|
|
|
|
//
|
|
// Set by the miniport before calling ScsiPortGetUncachedExtension to indicate
|
|
// that scsiport should provide it with 64-bit physical addresses. If the
|
|
// system does not support 64-bit PA's then this bit will be ignored.
|
|
//
|
|
|
|
#define SCSI_DMA64_MINIPORT_SUPPORTED 0x01
|
|
|
|
|
|
//
|
|
// Command type (and parameter) definition(s) for AdapterControl requests.
|
|
//
|
|
|
|
typedef enum _SCSI_ADAPTER_CONTROL_TYPE {
|
|
ScsiQuerySupportedControlTypes = 0,
|
|
ScsiStopAdapter,
|
|
ScsiRestartAdapter,
|
|
ScsiSetBootConfig,
|
|
ScsiSetRunningConfig,
|
|
ScsiAdapterControlMax,
|
|
MakeAdapterControlTypeSizeOfUlong = 0xffffffff
|
|
} SCSI_ADAPTER_CONTROL_TYPE, *PSCSI_ADAPTER_CONTROL_TYPE;
|
|
|
|
//
|
|
// Adapter control status values
|
|
//
|
|
|
|
typedef enum _SCSI_ADAPTER_CONTROL_STATUS {
|
|
ScsiAdapterControlSuccess = 0,
|
|
ScsiAdapterControlUnsuccessful
|
|
} SCSI_ADAPTER_CONTROL_STATUS, *PSCSI_ADAPTER_CONTROL_STATUS;
|
|
|
|
//
|
|
// Parameters for Adapter Control Functions:
|
|
//
|
|
|
|
//
|
|
// ScsiQuerySupportedControlTypes:
|
|
//
|
|
|
|
#pragma warning(disable:4200)
|
|
typedef struct _SCSI_SUPPORTED_CONTROL_TYPE_LIST {
|
|
|
|
//
|
|
// Specifies the number of entries in the adapter control type list.
|
|
//
|
|
|
|
IN ULONG MaxControlType;
|
|
|
|
//
|
|
// The miniport will set TRUE for each control type it supports.
|
|
// The number of entries in this array is defined by MaxAdapterControlType
|
|
// - the miniport must not attempt to set any AC types beyond the maximum
|
|
// value specified.
|
|
//
|
|
|
|
OUT BOOLEAN SupportedTypeList[0];
|
|
|
|
} SCSI_SUPPORTED_CONTROL_TYPE_LIST, *PSCSI_SUPPORTED_CONTROL_TYPE_LIST;
|
|
#pragma warning(default:4200)
|
|
|
|
//
|
|
// Uninitialized flag value.
|
|
//
|
|
|
|
#define SP_UNINITIALIZED_VALUE ((ULONG) ~0)
|
|
#define SP_UNTAGGED ((UCHAR) ~0)
|
|
|
|
//
|
|
// Set asynchronous events.
|
|
//
|
|
|
|
#define SRBEV_BUS_RESET 0x0001
|
|
#define SRBEV_SCSI_ASYNC_NOTIFICATION 0x0002
|
|
|
|
// begin_ntminitape
|
|
|
|
#define MAXIMUM_CDB_SIZE 12
|
|
|
|
//
|
|
// SCSI I/O Request Block
|
|
//
|
|
|
|
typedef struct _SCSI_REQUEST_BLOCK {
|
|
USHORT Length; // offset 0
|
|
UCHAR Function; // offset 2
|
|
UCHAR SrbStatus; // offset 3
|
|
UCHAR ScsiStatus; // offset 4
|
|
UCHAR PathId; // offset 5
|
|
UCHAR TargetId; // offset 6
|
|
UCHAR Lun; // offset 7
|
|
UCHAR QueueTag; // offset 8
|
|
UCHAR QueueAction; // offset 9
|
|
UCHAR CdbLength; // offset a
|
|
UCHAR SenseInfoBufferLength; // offset b
|
|
ULONG SrbFlags; // offset c
|
|
ULONG DataTransferLength; // offset 10
|
|
ULONG TimeOutValue; // offset 14
|
|
PVOID DataBuffer; // offset 18
|
|
PVOID SenseInfoBuffer; // offset 1c
|
|
struct _SCSI_REQUEST_BLOCK *NextSrb; // offset 20
|
|
PVOID OriginalRequest; // offset 24
|
|
PVOID SrbExtension; // offset 28
|
|
union {
|
|
ULONG InternalStatus; // offset 2c
|
|
ULONG QueueSortKey; // offset 2c
|
|
};
|
|
|
|
#if defined(_WIN64)
|
|
|
|
//
|
|
// Force PVOID alignment of Cdb
|
|
//
|
|
|
|
ULONG Reserved;
|
|
|
|
#endif
|
|
|
|
UCHAR Cdb[16]; // offset 30
|
|
} SCSI_REQUEST_BLOCK, *PSCSI_REQUEST_BLOCK;
|
|
|
|
#define SCSI_REQUEST_BLOCK_SIZE sizeof(SCSI_REQUEST_BLOCK)
|
|
|
|
//
|
|
// SCSI I/O Request Block for WMI Requests
|
|
//
|
|
|
|
typedef struct _SCSI_WMI_REQUEST_BLOCK {
|
|
USHORT Length;
|
|
UCHAR Function; // SRB_FUNCTION_WMI
|
|
UCHAR SrbStatus;
|
|
UCHAR WMISubFunction;
|
|
UCHAR PathId; // If SRB_WMI_FLAGS_ADAPTER_REQUEST is set in
|
|
UCHAR TargetId; // WMIFlags then PathId, TargetId and Lun are
|
|
UCHAR Lun; // reserved fields.
|
|
UCHAR Reserved1;
|
|
UCHAR WMIFlags;
|
|
UCHAR Reserved2[2];
|
|
ULONG SrbFlags;
|
|
ULONG DataTransferLength;
|
|
ULONG TimeOutValue;
|
|
PVOID DataBuffer;
|
|
PVOID DataPath;
|
|
PVOID Reserved3;
|
|
PVOID OriginalRequest;
|
|
PVOID SrbExtension;
|
|
ULONG Reserved4;
|
|
UCHAR Reserved5[16];
|
|
} SCSI_WMI_REQUEST_BLOCK, *PSCSI_WMI_REQUEST_BLOCK;
|
|
|
|
//
|
|
// SRB Functions
|
|
//
|
|
|
|
#define SRB_FUNCTION_EXECUTE_SCSI 0x00
|
|
#define SRB_FUNCTION_CLAIM_DEVICE 0x01
|
|
#define SRB_FUNCTION_IO_CONTROL 0x02
|
|
#define SRB_FUNCTION_RECEIVE_EVENT 0x03
|
|
#define SRB_FUNCTION_RELEASE_QUEUE 0x04
|
|
#define SRB_FUNCTION_ATTACH_DEVICE 0x05
|
|
#define SRB_FUNCTION_RELEASE_DEVICE 0x06
|
|
#define SRB_FUNCTION_SHUTDOWN 0x07
|
|
#define SRB_FUNCTION_FLUSH 0x08
|
|
#define SRB_FUNCTION_ABORT_COMMAND 0x10
|
|
#define SRB_FUNCTION_RELEASE_RECOVERY 0x11
|
|
#define SRB_FUNCTION_RESET_BUS 0x12
|
|
#define SRB_FUNCTION_RESET_DEVICE 0x13
|
|
#define SRB_FUNCTION_TERMINATE_IO 0x14
|
|
#define SRB_FUNCTION_FLUSH_QUEUE 0x15
|
|
#define SRB_FUNCTION_REMOVE_DEVICE 0x16
|
|
#define SRB_FUNCTION_WMI 0x17
|
|
#define SRB_FUNCTION_LOCK_QUEUE 0x18
|
|
#define SRB_FUNCTION_UNLOCK_QUEUE 0x19
|
|
#define SRB_FUNCTION_RESET_LOGICAL_UNIT 0x20
|
|
|
|
//
|
|
// SRB Status
|
|
//
|
|
|
|
#define SRB_STATUS_PENDING 0x00
|
|
#define SRB_STATUS_SUCCESS 0x01
|
|
#define SRB_STATUS_ABORTED 0x02
|
|
#define SRB_STATUS_ABORT_FAILED 0x03
|
|
#define SRB_STATUS_ERROR 0x04
|
|
#define SRB_STATUS_BUSY 0x05
|
|
#define SRB_STATUS_INVALID_REQUEST 0x06
|
|
#define SRB_STATUS_INVALID_PATH_ID 0x07
|
|
#define SRB_STATUS_NO_DEVICE 0x08
|
|
#define SRB_STATUS_TIMEOUT 0x09
|
|
#define SRB_STATUS_SELECTION_TIMEOUT 0x0A
|
|
#define SRB_STATUS_COMMAND_TIMEOUT 0x0B
|
|
#define SRB_STATUS_MESSAGE_REJECTED 0x0D
|
|
#define SRB_STATUS_BUS_RESET 0x0E
|
|
#define SRB_STATUS_PARITY_ERROR 0x0F
|
|
#define SRB_STATUS_REQUEST_SENSE_FAILED 0x10
|
|
#define SRB_STATUS_NO_HBA 0x11
|
|
#define SRB_STATUS_DATA_OVERRUN 0x12
|
|
#define SRB_STATUS_UNEXPECTED_BUS_FREE 0x13
|
|
#define SRB_STATUS_PHASE_SEQUENCE_FAILURE 0x14
|
|
#define SRB_STATUS_BAD_SRB_BLOCK_LENGTH 0x15
|
|
#define SRB_STATUS_REQUEST_FLUSHED 0x16
|
|
#define SRB_STATUS_INVALID_LUN 0x20
|
|
#define SRB_STATUS_INVALID_TARGET_ID 0x21
|
|
#define SRB_STATUS_BAD_FUNCTION 0x22
|
|
#define SRB_STATUS_ERROR_RECOVERY 0x23
|
|
#define SRB_STATUS_NOT_POWERED 0x24
|
|
|
|
//
|
|
// This value is used by the port driver to indicate that a non-scsi-related
|
|
// error occured. Miniports must never return this status.
|
|
//
|
|
|
|
#define SRB_STATUS_INTERNAL_ERROR 0x30
|
|
|
|
//
|
|
// Srb status values 0x38 through 0x3f are reserved for internal port driver
|
|
// use.
|
|
//
|
|
|
|
|
|
|
|
//
|
|
// SRB Status Masks
|
|
//
|
|
|
|
#define SRB_STATUS_QUEUE_FROZEN 0x40
|
|
#define SRB_STATUS_AUTOSENSE_VALID 0x80
|
|
|
|
#define SRB_STATUS(Status) (Status & ~(SRB_STATUS_AUTOSENSE_VALID | SRB_STATUS_QUEUE_FROZEN))
|
|
|
|
//
|
|
// SRB Flag Bits
|
|
//
|
|
|
|
#define SRB_FLAGS_QUEUE_ACTION_ENABLE 0x00000002
|
|
#define SRB_FLAGS_DISABLE_DISCONNECT 0x00000004
|
|
#define SRB_FLAGS_DISABLE_SYNCH_TRANSFER 0x00000008
|
|
|
|
#define SRB_FLAGS_BYPASS_FROZEN_QUEUE 0x00000010
|
|
#define SRB_FLAGS_DISABLE_AUTOSENSE 0x00000020
|
|
#define SRB_FLAGS_DATA_IN 0x00000040
|
|
#define SRB_FLAGS_DATA_OUT 0x00000080
|
|
#define SRB_FLAGS_NO_DATA_TRANSFER 0x00000000
|
|
#define SRB_FLAGS_UNSPECIFIED_DIRECTION (SRB_FLAGS_DATA_IN | SRB_FLAGS_DATA_OUT)
|
|
|
|
#define SRB_FLAGS_NO_QUEUE_FREEZE 0x00000100
|
|
#define SRB_FLAGS_ADAPTER_CACHE_ENABLE 0x00000200
|
|
#define SRB_FLAGS_FREE_SENSE_BUFFER 0x00000400
|
|
|
|
#define SRB_FLAGS_IS_ACTIVE 0x00010000
|
|
#define SRB_FLAGS_ALLOCATED_FROM_ZONE 0x00020000
|
|
#define SRB_FLAGS_SGLIST_FROM_POOL 0x00040000
|
|
#define SRB_FLAGS_BYPASS_LOCKED_QUEUE 0x00080000
|
|
|
|
#define SRB_FLAGS_NO_KEEP_AWAKE 0x00100000
|
|
#define SRB_FLAGS_PORT_DRIVER_ALLOCSENSE 0x00200000
|
|
#define SRB_FLAGS_PORT_DRIVER_SENSEHASPORT 0x00400000
|
|
#define SRB_FLAGS_DONT_START_NEXT_PACKET 0x00800000
|
|
|
|
#define SRB_FLAGS_PORT_DRIVER_RESERVED 0x0F000000
|
|
#define SRB_FLAGS_CLASS_DRIVER_RESERVED 0xF0000000
|
|
|
|
#if DBG==1
|
|
//
|
|
// A signature used to validate the scsi port number
|
|
// at the end of a sense buffer.
|
|
//
|
|
#define SCSI_PORT_SIGNATURE 0x54524f50
|
|
#endif
|
|
|
|
//
|
|
// Queue Action
|
|
//
|
|
|
|
#define SRB_SIMPLE_TAG_REQUEST 0x20
|
|
#define SRB_HEAD_OF_QUEUE_TAG_REQUEST 0x21
|
|
#define SRB_ORDERED_QUEUE_TAG_REQUEST 0x22
|
|
|
|
#define SRB_WMI_FLAGS_ADAPTER_REQUEST 0x01
|
|
|
|
// end_ntminitape
|
|
|
|
//
|
|
// SCSI Adapter Dependent Routines
|
|
//
|
|
|
|
typedef
|
|
BOOLEAN
|
|
(*PHW_INITIALIZE) (
|
|
IN PVOID DeviceExtension
|
|
);
|
|
|
|
typedef
|
|
BOOLEAN
|
|
(*PHW_STARTIO) (
|
|
IN PVOID DeviceExtension,
|
|
IN PSCSI_REQUEST_BLOCK Srb
|
|
);
|
|
|
|
typedef
|
|
BOOLEAN
|
|
(*PHW_INTERRUPT) (
|
|
IN PVOID DeviceExtension
|
|
);
|
|
|
|
typedef
|
|
VOID
|
|
(*PHW_TIMER) (
|
|
IN PVOID DeviceExtension
|
|
);
|
|
|
|
typedef
|
|
VOID
|
|
(*PHW_DMA_STARTED) (
|
|
IN PVOID DeviceExtension
|
|
);
|
|
|
|
typedef
|
|
ULONG
|
|
(*PHW_FIND_ADAPTER) (
|
|
IN PVOID DeviceExtension,
|
|
IN PVOID HwContext,
|
|
IN PVOID BusInformation,
|
|
IN PCHAR ArgumentString,
|
|
IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo,
|
|
OUT PBOOLEAN Again
|
|
);
|
|
|
|
typedef
|
|
BOOLEAN
|
|
(*PHW_RESET_BUS) (
|
|
IN PVOID DeviceExtension,
|
|
IN ULONG PathId
|
|
);
|
|
|
|
typedef
|
|
BOOLEAN
|
|
(*PHW_ADAPTER_STATE) (
|
|
IN PVOID DeviceExtension,
|
|
IN PVOID Context,
|
|
IN BOOLEAN SaveState
|
|
);
|
|
|
|
typedef
|
|
SCSI_ADAPTER_CONTROL_STATUS
|
|
(*PHW_ADAPTER_CONTROL) (
|
|
IN PVOID DeviceExtension,
|
|
IN SCSI_ADAPTER_CONTROL_TYPE ControlType,
|
|
IN PVOID Parameters
|
|
);
|
|
|
|
//
|
|
// Port driver error codes
|
|
//
|
|
|
|
#define SP_BUS_PARITY_ERROR 0x0001
|
|
#define SP_UNEXPECTED_DISCONNECT 0x0002
|
|
#define SP_INVALID_RESELECTION 0x0003
|
|
#define SP_BUS_TIME_OUT 0x0004
|
|
#define SP_PROTOCOL_ERROR 0x0005
|
|
#define SP_INTERNAL_ADAPTER_ERROR 0x0006
|
|
#define SP_REQUEST_TIMEOUT 0x0007
|
|
#define SP_IRQ_NOT_RESPONDING 0x0008
|
|
#define SP_BAD_FW_WARNING 0x0009
|
|
#define SP_BAD_FW_ERROR 0x000a
|
|
#define SP_LOST_WMI_MINIPORT_REQUEST 0x000b
|
|
|
|
|
|
//
|
|
// Return values for SCSI_HW_FIND_ADAPTER.
|
|
//
|
|
|
|
#define SP_RETURN_NOT_FOUND 0
|
|
#define SP_RETURN_FOUND 1
|
|
#define SP_RETURN_ERROR 2
|
|
#define SP_RETURN_BAD_CONFIG 3
|
|
|
|
//
|
|
// Notification Event Types
|
|
//
|
|
|
|
typedef enum _SCSI_NOTIFICATION_TYPE {
|
|
RequestComplete,
|
|
NextRequest,
|
|
NextLuRequest,
|
|
ResetDetected,
|
|
CallDisableInterrupts,
|
|
CallEnableInterrupts,
|
|
RequestTimerCall,
|
|
BusChangeDetected, /* New */
|
|
WMIEvent,
|
|
WMIReregister
|
|
} SCSI_NOTIFICATION_TYPE, *PSCSI_NOTIFICATION_TYPE;
|
|
|
|
//
|
|
// Structure passed between miniport initialization
|
|
// and SCSI port initialization
|
|
//
|
|
|
|
typedef struct _HW_INITIALIZATION_DATA {
|
|
|
|
ULONG HwInitializationDataSize;
|
|
|
|
//
|
|
// Adapter interface type:
|
|
//
|
|
// Internal
|
|
// Isa
|
|
// Eisa
|
|
// MicroChannel
|
|
// TurboChannel
|
|
// PCIBus
|
|
// VMEBus
|
|
// NuBus
|
|
// PCMCIABus
|
|
// CBus
|
|
// MPIBus
|
|
// MPSABus
|
|
//
|
|
|
|
INTERFACE_TYPE AdapterInterfaceType;
|
|
|
|
//
|
|
// Miniport driver routines
|
|
//
|
|
|
|
PHW_INITIALIZE HwInitialize;
|
|
|
|
PHW_STARTIO HwStartIo;
|
|
|
|
PHW_INTERRUPT HwInterrupt;
|
|
|
|
PHW_FIND_ADAPTER HwFindAdapter;
|
|
|
|
PHW_RESET_BUS HwResetBus;
|
|
|
|
PHW_DMA_STARTED HwDmaStarted;
|
|
|
|
PHW_ADAPTER_STATE HwAdapterState;
|
|
|
|
//
|
|
// Miniport driver resources
|
|
//
|
|
|
|
ULONG DeviceExtensionSize;
|
|
|
|
ULONG SpecificLuExtensionSize;
|
|
|
|
ULONG SrbExtensionSize;
|
|
|
|
ULONG NumberOfAccessRanges;
|
|
|
|
PVOID Reserved;
|
|
|
|
//
|
|
// Data buffers must be mapped into virtual address space.
|
|
//
|
|
|
|
BOOLEAN MapBuffers;
|
|
|
|
//
|
|
// The driver will need to tranlate virtual to physical addresses.
|
|
//
|
|
|
|
BOOLEAN NeedPhysicalAddresses;
|
|
|
|
//
|
|
// Supports tagged queuing
|
|
//
|
|
|
|
BOOLEAN TaggedQueuing;
|
|
|
|
//
|
|
// Supports auto request sense.
|
|
//
|
|
|
|
BOOLEAN AutoRequestSense;
|
|
|
|
//
|
|
// Supports multiple requests per logical unit.
|
|
//
|
|
|
|
BOOLEAN MultipleRequestPerLu;
|
|
|
|
//
|
|
// Support receive event function.
|
|
//
|
|
|
|
BOOLEAN ReceiveEvent;
|
|
|
|
//
|
|
// Vendor identification length
|
|
//
|
|
|
|
USHORT VendorIdLength;
|
|
|
|
//
|
|
// Vendor identification
|
|
//
|
|
|
|
PVOID VendorId;
|
|
|
|
//
|
|
// Pad for alignment and future use.
|
|
//
|
|
|
|
USHORT ReservedUshort;
|
|
|
|
//
|
|
// Device identification length
|
|
//
|
|
|
|
USHORT DeviceIdLength;
|
|
|
|
//
|
|
// Device identification
|
|
//
|
|
|
|
PVOID DeviceId;
|
|
|
|
//
|
|
// Stop adapter routine.
|
|
//
|
|
|
|
PHW_ADAPTER_CONTROL HwAdapterControl;
|
|
|
|
} HW_INITIALIZATION_DATA, *PHW_INITIALIZATION_DATA;
|
|
|
|
// begin_ntminitape
|
|
|
|
#ifndef _NTDDK_
|
|
#define SCSIPORT_API DECLSPEC_IMPORT
|
|
#else
|
|
#define SCSIPORT_API
|
|
#endif
|
|
|
|
// end_ntminitape
|
|
|
|
//
|
|
// Port driver routines called by miniport driver
|
|
//
|
|
|
|
SCSIPORT_API
|
|
ULONG
|
|
ScsiPortInitialize(
|
|
IN PVOID Argument1,
|
|
IN PVOID Argument2,
|
|
IN struct _HW_INITIALIZATION_DATA *HwInitializationData,
|
|
IN PVOID HwContext
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortFreeDeviceBase(
|
|
IN PVOID HwDeviceExtension,
|
|
IN PVOID MappedAddress
|
|
);
|
|
|
|
SCSIPORT_API
|
|
ULONG
|
|
ScsiPortGetBusData(
|
|
IN PVOID DeviceExtension,
|
|
IN ULONG BusDataType,
|
|
IN ULONG SystemIoBusNumber,
|
|
IN ULONG SlotNumber,
|
|
IN PVOID Buffer,
|
|
IN ULONG Length
|
|
);
|
|
|
|
SCSIPORT_API
|
|
ULONG
|
|
ScsiPortSetBusDataByOffset(
|
|
IN PVOID DeviceExtension,
|
|
IN ULONG BusDataType,
|
|
IN ULONG SystemIoBusNumber,
|
|
IN ULONG SlotNumber,
|
|
IN PVOID Buffer,
|
|
IN ULONG Offset,
|
|
IN ULONG Length
|
|
);
|
|
|
|
SCSIPORT_API
|
|
PVOID
|
|
ScsiPortGetDeviceBase(
|
|
IN PVOID HwDeviceExtension,
|
|
IN INTERFACE_TYPE BusType,
|
|
IN ULONG SystemIoBusNumber,
|
|
IN SCSI_PHYSICAL_ADDRESS IoAddress,
|
|
IN ULONG NumberOfBytes,
|
|
IN BOOLEAN InIoSpace
|
|
);
|
|
|
|
SCSIPORT_API
|
|
PVOID
|
|
ScsiPortGetLogicalUnit(
|
|
IN PVOID HwDeviceExtension,
|
|
IN UCHAR PathId,
|
|
IN UCHAR TargetId,
|
|
IN UCHAR Lun
|
|
);
|
|
|
|
SCSIPORT_API
|
|
PSCSI_REQUEST_BLOCK
|
|
ScsiPortGetSrb(
|
|
IN PVOID DeviceExtension,
|
|
IN UCHAR PathId,
|
|
IN UCHAR TargetId,
|
|
IN UCHAR Lun,
|
|
IN LONG QueueTag
|
|
);
|
|
|
|
SCSIPORT_API
|
|
SCSI_PHYSICAL_ADDRESS
|
|
ScsiPortGetPhysicalAddress(
|
|
IN PVOID HwDeviceExtension,
|
|
IN PSCSI_REQUEST_BLOCK Srb,
|
|
IN PVOID VirtualAddress,
|
|
OUT ULONG *Length
|
|
);
|
|
|
|
SCSIPORT_API
|
|
PVOID
|
|
ScsiPortGetVirtualAddress(
|
|
IN PVOID HwDeviceExtension,
|
|
IN SCSI_PHYSICAL_ADDRESS PhysicalAddress
|
|
);
|
|
|
|
SCSIPORT_API
|
|
PVOID
|
|
ScsiPortGetUncachedExtension(
|
|
IN PVOID HwDeviceExtension,
|
|
IN PPORT_CONFIGURATION_INFORMATION ConfigInfo,
|
|
IN ULONG NumberOfBytes
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortFlushDma(
|
|
IN PVOID DeviceExtension
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortIoMapTransfer(
|
|
IN PVOID HwDeviceExtension,
|
|
IN PSCSI_REQUEST_BLOCK Srb,
|
|
IN PVOID LogicalAddress,
|
|
IN ULONG Length
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortNotification(
|
|
IN SCSI_NOTIFICATION_TYPE NotificationType,
|
|
IN PVOID HwDeviceExtension,
|
|
...
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortLogError(
|
|
IN PVOID HwDeviceExtension,
|
|
IN PSCSI_REQUEST_BLOCK Srb OPTIONAL,
|
|
IN UCHAR PathId,
|
|
IN UCHAR TargetId,
|
|
IN UCHAR Lun,
|
|
IN ULONG ErrorCode,
|
|
IN ULONG UniqueId
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortCompleteRequest(
|
|
IN PVOID HwDeviceExtension,
|
|
IN UCHAR PathId,
|
|
IN UCHAR TargetId,
|
|
IN UCHAR Lun,
|
|
IN UCHAR SrbStatus
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortMoveMemory(
|
|
IN PVOID WriteBuffer,
|
|
IN PVOID ReadBuffer,
|
|
IN ULONG Length
|
|
);
|
|
|
|
SCSIPORT_API
|
|
UCHAR
|
|
ScsiPortReadPortUchar(
|
|
IN PUCHAR Port
|
|
);
|
|
|
|
SCSIPORT_API
|
|
USHORT
|
|
ScsiPortReadPortUshort(
|
|
IN PUSHORT Port
|
|
);
|
|
|
|
SCSIPORT_API
|
|
ULONG
|
|
ScsiPortReadPortUlong(
|
|
IN PULONG Port
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortReadPortBufferUchar(
|
|
IN PUCHAR Port,
|
|
IN PUCHAR Buffer,
|
|
IN ULONG Count
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortReadPortBufferUshort(
|
|
IN PUSHORT Port,
|
|
IN PUSHORT Buffer,
|
|
IN ULONG Count
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortReadPortBufferUlong(
|
|
IN PULONG Port,
|
|
IN PULONG Buffer,
|
|
IN ULONG Count
|
|
);
|
|
|
|
SCSIPORT_API
|
|
UCHAR
|
|
ScsiPortReadRegisterUchar(
|
|
IN PUCHAR Register
|
|
);
|
|
|
|
SCSIPORT_API
|
|
USHORT
|
|
ScsiPortReadRegisterUshort(
|
|
IN PUSHORT Register
|
|
);
|
|
|
|
SCSIPORT_API
|
|
ULONG
|
|
ScsiPortReadRegisterUlong(
|
|
IN PULONG Register
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortReadRegisterBufferUchar(
|
|
IN PUCHAR Register,
|
|
IN PUCHAR Buffer,
|
|
IN ULONG Count
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortReadRegisterBufferUshort(
|
|
IN PUSHORT Register,
|
|
IN PUSHORT Buffer,
|
|
IN ULONG Count
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortReadRegisterBufferUlong(
|
|
IN PULONG Register,
|
|
IN PULONG Buffer,
|
|
IN ULONG Count
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortStallExecution(
|
|
IN ULONG Delay
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortWritePortUchar(
|
|
IN PUCHAR Port,
|
|
IN UCHAR Value
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortWritePortUshort(
|
|
IN PUSHORT Port,
|
|
IN USHORT Value
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortWritePortUlong(
|
|
IN PULONG Port,
|
|
IN ULONG Value
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortWritePortBufferUchar(
|
|
IN PUCHAR Port,
|
|
IN PUCHAR Buffer,
|
|
IN ULONG Count
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortWritePortBufferUshort(
|
|
IN PUSHORT Port,
|
|
IN PUSHORT Buffer,
|
|
IN ULONG Count
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortWritePortBufferUlong(
|
|
IN PULONG Port,
|
|
IN PULONG Buffer,
|
|
IN ULONG Count
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortWriteRegisterUchar(
|
|
IN PUCHAR Register,
|
|
IN UCHAR Value
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortWriteRegisterUshort(
|
|
IN PUSHORT Register,
|
|
IN USHORT Value
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortWriteRegisterUlong(
|
|
IN PULONG Register,
|
|
IN ULONG Value
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortWriteRegisterBufferUchar(
|
|
IN PUCHAR Register,
|
|
IN PUCHAR Buffer,
|
|
IN ULONG Count
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortWriteRegisterBufferUshort(
|
|
IN PUSHORT Register,
|
|
IN PUSHORT Buffer,
|
|
IN ULONG Count
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortWriteRegisterBufferUlong(
|
|
IN PULONG Register,
|
|
IN PULONG Buffer,
|
|
IN ULONG Count
|
|
);
|
|
|
|
SCSIPORT_API
|
|
SCSI_PHYSICAL_ADDRESS
|
|
ScsiPortConvertUlongToPhysicalAddress(
|
|
ULONG_PTR UlongAddress
|
|
);
|
|
|
|
SCSIPORT_API
|
|
ULONG
|
|
ScsiPortConvertPhysicalAddressToUlong(
|
|
SCSI_PHYSICAL_ADDRESS Address
|
|
);
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiPortQuerySystemTime(
|
|
OUT PLARGE_INTEGER CurrentTime
|
|
);
|
|
|
|
#define ScsiPortConvertPhysicalAddressToUlong(Address) ((Address).LowPart)
|
|
|
|
//
|
|
// Sundown Note:
|
|
// For now, ScsiPortConvertPhysicalAddressToULongPtr() exists only as a macro.
|
|
//
|
|
|
|
#define ScsiPortConvertPhysicalAddressToULongPtr(Address) ((ULONG_PTR)((Address).QuadPart))
|
|
|
|
SCSIPORT_API
|
|
BOOLEAN
|
|
ScsiPortValidateRange(
|
|
IN PVOID HwDeviceExtension,
|
|
IN INTERFACE_TYPE BusType,
|
|
IN ULONG SystemIoBusNumber,
|
|
IN SCSI_PHYSICAL_ADDRESS IoAddress,
|
|
IN ULONG NumberOfBytes,
|
|
IN BOOLEAN InIoSpace
|
|
);
|
|
|
|
// begin_ntminitape
|
|
|
|
SCSIPORT_API
|
|
VOID
|
|
ScsiDebugPrint(
|
|
ULONG DebugPrintLevel,
|
|
PCCHAR DebugMessage,
|
|
...
|
|
);
|
|
|
|
// end_ntminitape
|
|
|
|
#endif //
|