able/windows-nt
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
windows-nt/Source/XPSP1/NT/drivers/wdm/usb/hcd/openhci/openhci.h
CryptoAlgo Inc b3cac27891 Add source files
2020-09-26 16:20:57 +08:00

1368 lines
46 KiB
C
Raw Permalink Blame History

/*++
Copyright (c) 1993 Microsoft Corporation
Module Name:
openhci.h
Abstract:
This module contains the PRIVATE definitions for the
code that implements the OpenHCI Host Controller Driver for USB.
Environment:
Kernel & user mode
Revision History:
12-28-95 : created jfuller
--*/
#include "stdarg.h"
#include "wdm.h"
#include "usbdi.h"
#include "hcdi.h"
#include "usbdlibi.h"
#include "usbdlib.h"
#include "dbg.h"
#ifndef OPENHCI_H
#define OPENHCI_H
// #define COMPAQ
// #define NEC
// #define CMD
// #define NSC //National Semiconductor
#define NEC_XXX
#define DISABLE_INT_DELAY_NO_INT 0
#define PREALLOCATE_DESCRIPTOR_MEMORY 1
#define PREALLOCATE_DESCRIPTOR_MEMORY_NUM_PAGES 2
#define RESOURCES_NOT_ON_IRP_STACK 0
#ifdef PNP_POWER
#define PnPEnabled() TRUE
#else
#define PnPEnabled() FALSE
#endif /* PNP_POWER */
#define HCD_PENDING_STATUS_SUBMITTING 0x40404001
#define HCD_PENDING_STATUS_SUBMITTED 0x40404002
#define HCD_PENDING_STATUS_QUEUED 0x40404003
//
// OpenHCI PCI Identification values
//
#define OpenHCI_PCI_BASE_CLASS 0x0C // base class is serial bus
#define OpenHCI_PCI_SUB_CLASS 0x03 // sub class is USB
#define OpenHCI_PCI_PROG_IF 0x10 // programming interface is OpenHCI
//
// Tag for memory allocations: 'OHCI'
//
#define OpenHCI_TAG 0x4943484F
//
// Eventually CacheCommon should determine if the platform snoops i/o cycles;
// for now, just cache memory allocated by HalAllocateCommonBuffer
#define CacheCommon TRUE
//
// Maximum length of name strings used in initialization code
//
#define NAME_MAX 256
#define NAME_STRING L"\\Device\\USB#"
/* 0 1234567 89012345 */
#define NAME_NO_POS 11
//
// highest physical address we can use
//
#define OpenHCI_HIGHEST_ADDRESS 0x000000FFFFFFFF;
//
// Maximum frame and packet overhead
//
#define MAXIMUM_OVERHEAD 210
#define OHCI_PAGE_SIZE 0x1000
// #define OHCI_PAGE_SIZE 0x20
#define OHCI_PAGE_SIZE_MASK (OHCI_PAGE_SIZE - 1)
#if DBG
#if !defined(FAKEPORTCHANGE)
#define FAKEPORTCHANGE 1
#endif
#else
#if !defined(FAKEPORTCHANGE)
#define FAKEPORTCHANGE 0
#endif
#endif
#ifdef MAX_DEBUG
#define OHCI_DEFAULT_DEBUG_OUTPUT_LEVEL 0xFFFFFFFF
#else
//#define OHCI_DEFAULT_DEBUG_OUTPUT_LEVEL 0xFEAAFFEE // 0xF8A8888E
#define OHCI_DEFAULT_DEBUG_OUTPUT_LEVEL 0x00000000
#endif
#define MIN(_A_,_B_) (((_A_) < (_B_)) ? (_A_) : (_B_))
#define IoDecrementStackLocation(IRP) \
(IRP)->CurrentLocation++; \
(IRP)->Tail.Overlay.CurrentStackLocation++;
#define IoCopyStackToNextStack(IRP) \
{ \
PIO_STACK_LOCATION now, later; \
now = IoGetCurrentIrpStackLocation (IRP); \
later = IoGetNextIrpStackLocation (IRP); \
later->Parameters = now->Parameters; \
later->MajorFunction = now->MajorFunction; \
later->MinorFunction = now->MinorFunction; \
later->Flags = now->Flags; \
}
//
// 7.1.1 HcRevision Register
// Definition of Host Controller Revision register
//
typedef union _HC_REVISION {
ULONG ul;
struct {
ULONG Rev:8;
ULONG :24;
};
} HC_REVISION, *PHC_REVISION;
//
// 7.1.2 HcControl Register
// Definition of Host Controller Control register
//
typedef union _HC_CONTROL {
ULONG ul;
struct {
ULONG ControlBulkServiceRatio:2;
ULONG PeriodicListEnable:1;
ULONG IsochronousEnable:1;
ULONG ControlListEnable:1;
ULONG BulkListEnable:1;
ULONG HostControllerFunctionalState:2;
ULONG InterruptRouting:1;
ULONG RemoteWakeupConnected:1;
ULONG RemoteWakeupEnable:1;
ULONG :21;
};
} HC_CONTROL, *PHC_CONTROL;
#define HcCtrl_CBSR_MASK 0x00000003L
#define HcCtrl_CBSR_1_to_1 0x00000000L
#define HcCtrl_CBSR_2_to_1 0x00000001L
#define HcCtrl_CBSR_3_to_1 0x00000002L
#define HcCtrl_CBSR_4_to_1 0x00000003L
#define HcCtrl_PeriodicListEnable 0x00000004L
#define HcCtrl_IsochronousEnable 0x00000008L
#define HcCtrl_ControlListEnable 0x00000010L
#define HcCtrl_BulkListEnable 0x00000020L
#define HcCtrl_ListEnableMask 0x00000038L
#define HcCtrl_HCFS_MASK 0x000000C0L
#define HcCtrl_HCFS_USBReset 0x00000000L
#define HcCtrl_HCFS_USBResume 0x00000040L
#define HcCtrl_HCFS_USBOperational 0x00000080L
#define HcCtrl_HCFS_USBSuspend 0x000000C0L
#define HcCtrl_InterruptRouting 0x00000100L
#define HcCtrl_RemoteWakeupConnected 0x00000200L
#define HcCtrl_RemoteWakeupEnable 0x00000400L
#define HcHCFS_USBReset 0x00000000
#define HcHCFS_USBResume 0x00000001
#define HcHCFS_USBOperational 0x00000002
#define HcHCFS_USBSuspend 0x00000003
//
// 7.1.3 HcCommandStatus Register
// Definition of Host Controller Command/Status register
//
typedef union _HC_COMMAND_STATUS {
ULONG ul; // use HcCmd flags below
struct {
ULONG HostControllerReset:1;
ULONG ControlListFilled:1;
ULONG BulkListFilled:1;
ULONG OwnershipChangeRequest:1;
ULONG :12;
ULONG SchedulingOverrunCount:2;
ULONG :14;
};
} HC_COMMAND_STATUS, *PHC_COMMAND_STATUS;
#define HcCmd_HostControllerReset 0x00000001
#define HcCmd_ControlListFilled 0x00000002
#define HcCmd_BulkListFilled 0x00000004
#define HcCmd_OwnershipChangeRequest 0x00000008
#define HcCmd_SOC_Mask 0x00030000
#define HcCmd_SOC_Offset 16
#define HcCmd_SOC_Mask_LowBits 0x00000003
//
// 7.3.1 HcFmInterval Register
// Definition of Host Controller Frame Interval register
//
typedef union _HC_FM_INTERVAL {
ULONG ul; // use HcFmI flags below
struct {
ULONG FrameInterval:14;
ULONG :2;
ULONG FSLargestDataPacket:15;
ULONG FrameIntervalToggle:1;
};
} HC_FM_INTERVAL, *PHC_FM_INTERVAL;
#define HcFmI_FRAME_INTERVAL_MASK 0x00003FFF
#define HcFmI_FS_LARGEST_DATA_PACKET_MASK 0x7FFF0000
#define HcFmI_FS_LARGEST_DATA_PACKET_SHIFT 16
#define HcFmI_FRAME_INTERVAL_TOGGLE 0x80000000
//
// 7.3.2 HcFmRemaining Register
// Definition of Host Controller Frame Remaining register
//
typedef union _HC_FM_REMAINING {
ULONG ul;
struct {
ULONG FrameRemaining:14;
ULONG :17;
ULONG FrameRemainingToggle:1;
};
} HC_FM_REMAINING, *PHC_FM_REMAINING;
//
// 7.4.1 HcRhDescriptorA Register
// Definition of Host Controller Root Hub DescriptorA register
//
typedef union _HC_RH_DESCRIPTOR_A {
ULONG ul;
struct {
ULONG NumberDownstreamPorts:8;
ULONG PowerSwitchingMode:1;
ULONG NoPowerSwitching:1;
ULONG :1;
ULONG OverCurrentProtectionMode:1;
ULONG NoOverCurrentProtection:1;
ULONG :11;
ULONG PowerOnToPowerGoodTime:8;
};
} HC_RH_DESCRIPTOR_A, *PHC_RH_DESCRIPTOR_A;
//
// 7.4.2 HcRhDescriptorB Register
// Definition of Host Controller Root Hub DescritorB register
//
typedef union _HC_RH_DESCRIPTOR_B {
ULONG ul;
struct {
USHORT DeviceRemovableMask;
USHORT PortPowerControlMask;
};
} HC_RH_DESCRIPTOR_B, *PHC_RH_DESCRIPTOR_B;
//
// Host Controler Hardware Registers as accessed in memory
//
typedef struct _HC_OPERATIONAL_REGISTER {
// 0 0x00 - 0,4,8,c
HC_REVISION HcRevision;
HC_CONTROL HcControl;
HC_COMMAND_STATUS HcCommandStatus;
ULONG HcInterruptStatus; // use HcInt flags below
// 1 0x10
ULONG HcInterruptEnable; // use HcInt flags below
ULONG HcInterruptDisable; // use HcInt flags below
ULONG HcHCCA; // physical pointer to Host Controller Communications Area
ULONG HcPeriodCurrentED; // physical ptr to current periodic ED
// 2 0x20
ULONG HcControlHeadED; // physical ptr to head of control list
ULONG HcControlCurrentED; // physical ptr to current control ED
ULONG HcBulkHeadED; // physical ptr to head of bulk list
ULONG HcBulkCurrentED; // physical ptr to current bulk ED
// 3 0x30
ULONG HcDoneHead; // physical ptr to internal done queue
HC_FM_INTERVAL HcFmInterval;
HC_FM_REMAINING HcFmRemaining;
ULONG HcFmNumber;
// 4 0x40
ULONG HcPeriodicStart;
ULONG HcLSThreshold;
HC_RH_DESCRIPTOR_A HcRhDescriptorA;
HC_RH_DESCRIPTOR_B HcRhDescriptorB;
// 5 0x50
ULONG HcRhStatus; // use HcRhS flags below
ULONG HcRhPortStatus[15]; // use HcRhPS flags below
} HC_OPERATIONAL_REGISTER, *PHC_OPERATIONAL_REGISTER;
//
// 7.1.4 HcInterrruptStatus Register
// 7.1.5 HcInterruptEnable Register
// 7.1.6 HcInterruptDisable Register
//
#define HcInt_SchedulingOverrun 0x00000001L
#define HcInt_WritebackDoneHead 0x00000002L
#define HcInt_StartOfFrame 0x00000004L
#define HcInt_ResumeDetected 0x00000008L
#define HcInt_UnrecoverableError 0x00000010L
#define HcInt_FrameNumberOverflow 0x00000020L
#define HcInt_RootHubStatusChange 0x00000040L
#define HcInt_OwnershipChange 0x40000000L
#define HcInt_MasterInterruptEnable 0x80000000L
//
// 7.4.3 HcRhStatus Register
//
#define HcRhS_LocalPowerStatus 0x00000001 // read only
#define HcRhS_OverCurrentIndicator 0x00000002 // read only
#define HcRhS_DeviceRemoteWakeupEnable 0x00008000 // read only
#define HcRhS_LocalPowerStatusChange 0x00010000 // read only
#define HcRhS_OverCurrentIndicatorChange 0x00020000 // read only
#define HcRhS_ClearGlobalPower 0x00000001 // write only
#define HcRhS_SetRemoteWakeupEnable 0x00008000 // write only
#define HcRhS_SetGlobalPower 0x00010000 // write only
#define HcRhS_ClearOverCurrentIndicatorChange 0x00020000 // write only
#define HcRhS_ClearRemoteWakeupEnable 0x80000000 // write only
//
// 7.4.4 HcRhPortStatus Register
//
#define HcRhPS_CurrentConnectStatus 0x00000001 // read only
#define HcRhPS_PortEnableStatus 0x00000002 // read only
#define HcRhPS_PortSuspendStatus 0x00000004 // read only
#define HcRhPS_PortOverCurrentIndicator 0x00000008 // read only
#define HcRhPS_PortResetStatus 0x00000010 // read only
#define HcRhPS_PortPowerStatus 0x00000100 // read only
#define HcRhPS_LowSpeedDeviceAttached 0x00000200 // read only
#define HcRhPS_ConnectStatusChange 0x00010000 // read only
#define HcRhPS_PortEnableStatusChange 0x00020000 // read only
#define HcRhPS_PortSuspendStatusChange 0x00040000 // read only
#define HcRhPS_OverCurrentIndicatorChange 0x00080000 // read only
#define HcRhPS_PortResetStatusChange 0x00100000 // read only
#define HcRhPS_ClearPortEnable 0x00000001 // write only
#define HcRhPS_SetPortEnable 0x00000002 // write only
#define HcRhPS_SetPortSuspend 0x00000004 // write only
#define HcRhPS_ClearPortSuspend 0x00000008 // write only
#define HcRhPS_SetPortReset 0x00000010 // write only
#define HcRhPS_SetPortPower 0x00000100 // write only
#define HcRhPS_ClearPortPower 0x00000200 // write only
#define HcRhPS_ClearConnectStatusChange 0x00010000 // write only
#define HcRhPS_ClearPortEnableStatusChange 0x00020000 // write only
#define HcRhPS_ClearPortSuspendStatusChange 0x00040000 // write only
#define HcRhPS_ClearPortOverCurrentChange 0x00080000 // write only
#define HcRhPS_ClearPortResetStatusChange 0x00100000 // write only
#define HcRhPS_RESERVED (~(HcRhPS_CurrentConnectStatus | \
HcRhPS_PortEnableStatus | \
HcRhPS_PortSuspendStatus | \
HcRhPS_PortOverCurrentIndicator | \
HcRhPS_PortResetStatus | \
HcRhPS_PortPowerStatus | \
HcRhPS_LowSpeedDeviceAttached | \
HcRhPS_ConnectStatusChange | \
HcRhPS_PortEnableStatusChange | \
HcRhPS_PortSuspendStatusChange | \
HcRhPS_OverCurrentIndicatorChange | \
HcRhPS_PortResetStatusChange \
))
//
// Host Controller Communications Area
//
typedef struct _HCCA_BLOCK {
ULONG HccaInterruptTable[32]; // physical pointer to interrupt lists
USHORT HccaFrameNumber; // 16-bit current frame number
USHORT HccaPad1; // When the HC updates
// HccaFrameNumber, it sets
// this word to zero.
ULONG HccaDoneHead; // pointer to done queue
ULONG Reserved[30]; // pad to 256 bytes
} HCCA_BLOCK, *PHCCA_BLOCK;
C_ASSERT(sizeof(HCCA_BLOCK) == 256);
#define HCCADoneHead_INT_FLAG 0x00000001 // bit set if other ints pending
//
// Host Controller Endpoint Descriptor Control DWORD
//
typedef union _HC_ENDPOINT_CONTROL {
ULONG Control; // use HcEDControl flags below
struct {
ULONG FunctionAddress:7;
ULONG EndpointNumber:4;
ULONG Direction:2; // use HcEDDirection flags below
ULONG LowSpeed:1;
ULONG sKip:1;
ULONG Isochronous:1;
ULONG MaxPacket:11;
ULONG Unused:5; //available for software use
};
} HC_ENDPOINT_CONTROL, *PHC_ENDPOINT_CONTROL;
//
// Definitions for HC_ENDPOINT_CONTROL.Control
//
#define HcEDControl_MPS_MASK 0x07FF0000 // Maximum Packet Size field
#define HcEDControl_MPS_SHIFT 16 // Shift Count for MPS
#define HcEDControl_ISOCH 0x00008000 // Bit set for isochronous endpoints
#define HcEDControl_SKIP 0x00004000 // Bit tells hw to skip this endpoint
#define HcEDControl_LOWSPEED 0x00002000 // Bit set if device is a low speed device
#define HcEDControl_DIR_MASK 0x00001800 // Transfer direction field
#define HcEDControl_DIR_DEFER 0x00000000 // Defer direction select to TD (Control Endpoints)
#define HcEDControl_DIR_OUT 0x00000800 // Direction is from host to device
#define HcEDControl_DIR_IN 0x00001000 // Direction is from device to host
#define HcEDControl_EN_MASK 0x00000780 // Endpoint Number field
#define HcEDControl_EN_SHIFT 7 // Shift Count for EN
#define HcEDControl_FA_MASK 0x0000007F // Function Address field
#define HcEDControl_FA_SHIFT 0 // Shift Count for FA
//
// Definitions for HC_ENDPOINT_CONTROL.Direction
//
#define HcEDDirection_Defer 0 // Defer direction to TD (Control Endpoints)
#define HcEDDirection_Out 1 // Direction from host to device
#define HcEDDirection_In 2 // Direction from device to host
//
// Host Controller Endpoint Descriptor, refer to Section 4.2, Endpoint Descriptor
//
typedef struct _HC_ENDPOINT_DESCRIPTOR {
HC_ENDPOINT_CONTROL; // dword 0
ULONG TailP; //physical pointer to HC_TRANSFER_DESCRIPTOR
volatile ULONG HeadP; //flags + phys ptr to HC_TRANSFER_DESCRIPTOR
ULONG NextED; //phys ptr to HC_ENDPOINT_DESCRIPTOR
} HC_ENDPOINT_DESCRIPTOR, *PHC_ENDPOINT_DESCRIPTOR;
C_ASSERT(sizeof(HC_ENDPOINT_DESCRIPTOR) == 16);
//
// Definitions for HC_ENDPOINT_DESCRIPTOR.HeadP
//
#define HcEDHeadP_FLAGS 0x0000000F //mask for flags in HeadP
#define HcEDHeadP_HALT 0x00000001 //hardware stopped bit
#define HcEDHeadP_CARRY 0x00000002 //hardware toggle carry bit
//
// HCD Isochronous offset/status words
//
typedef union _HC_OFFSET_PSW {
struct {
USHORT Offset:13; // Offset within two pages of packet buffer
USHORT Ones:3; // should be 111b when in Offset format
};
struct {
USHORT Size:11; // Size of packet received
USHORT :1; // reserved
USHORT ConditionCode:4; // use HcCC flags below
};
USHORT PSW; // use HcPSW flags below
} HC_OFFSET_PSW, *PHC_OFFSET_PSW;
//
// Definitions for HC_OFFSET_PSW.PSW
//
#define HcPSW_OFFSET_MASK 0x0FFF // Packet buffer offset field
#define HcPSW_SECOND_PAGE 0x1000 // Is this packet on 2nd page
#define HcPSW_ONES 0xE000 // The ones for Offset form
#define HcPSW_CONDITION_CODE_MASK 0xF000 // Packet ConditionCode field
#define HcPSW_CONDITION_CODE_SHIFT 12 // shift count for Code
#define HcPSW_RETURN_SIZE 0x07FF // The size field.
//
// HCD Transfer Descriptor Control DWord
//
typedef union _HC_TRANSFER_CONTROL {
ULONG Control; // use HcTDControl flags below
struct _HC_GENERAL_TD_CONTROL{
ULONG :16; // available for s/w use in GTD
ULONG IsochFlag:1; // should be 0 for GTD, s/w flag
ULONG :1; // available for s/w use
ULONG ShortXferOk:1; // if set don't report error on short transfer
ULONG Direction:2; // use HcTDDirection flags below
ULONG IntDelay:3; // use HcTDIntDelay flags below
ULONG Toggle:2; // use HcTDToggle flags below
ULONG ErrorCount:2;
ULONG ConditionCode:4; // use HcCC flags below
};
struct _HC_ISOCHRONOUS_TD_CONTROL{
ULONG StartingFrame:16;
ULONG Isochronous:1; // should be 1 for ITD, s/w flag
ULONG :1; // available for s/w use
ULONG :3; // available for s/w use in ITD
ULONG :3; // IntDelay
ULONG FrameCount:3; // one less than number of frames described in ITD
ULONG :1; // available for s/w use in ITD
ULONG :4; // ConditionCode
};
} HC_TRANSFER_CONTROL, *PHC_TRANSFER_CONTROL;
//
// Definitions for HC_TRANSFER_CONTROL.Control
//
#define HcTDControl_STARTING_FRAME 0x0000FFFF // mask for starting frame (Isochronous)
#define HcTDControl_ISOCHRONOUS 0x00010000 // 1 for Isoch TD, 0 for General TD
#define HcTDControl_SHORT_XFER_OK 0x00040000 // 0 if short transfers are errors
#define HcTDControl_DIR_MASK 0x00180000 // Transfer direction field
#define HcTDControl_DIR_SETUP 0x00000000 // direction is setup packet from host to device
#define HcTDControl_DIR_OUT 0x00080000 // direction is from host to device
#define HcTDControl_DIR_IN 0x00100000 // direction is from device to host
#define HcTDControl_INT_DELAY_MASK 0x00E00000 // Interrupt Delay field
#define HcTDControl_INT_DELAY_0_MS 0x00000000 // Interrupt at end of frame TD is completed
#define HcTDControl_INT_DELAY_1_MS 0x00200000 // Interrupt no later than end of 1st frame after TD is completed
#define HcTDControl_INT_DELAY_2_MS 0x00400000 // Interrupt no later than end of 2nd frame after TD is completed
#define HcTDControl_INT_DELAY_3_MS 0x00600000 // Interrupt no later than end of 3rd frame after TD is completed
#define HcTDControl_INT_DELAY_4_MS 0x00800000 // Interrupt no later than end of 4th frame after TD is completed
#define HcTDControl_INT_DELAY_5_MS 0x00A00000 // Interrupt no later than end of 5th frame after TD is completed
#define HcTDControl_INT_DELAY_6_MS 0x00C00000 // Interrupt no later than end of 6th frame after TD is completed
#ifdef NSC
#define HcTDControl_INT_DELAY_NO_INT 0x00C00000 // Almost infinity but not yet quite.
#elif DISABLE_INT_DELAY_NO_INT
#define HcTDControl_INT_DELAY_NO_INT 0x00000000 // Interrupt at the completion of all packets.
#else
#define HcTDControl_INT_DELAY_NO_INT 0x00E00000 // Do not cause an interrupt for normal completion of this TD
#endif
#define HcTDControl_FRAME_COUNT_MASK 0x07000000 // mask for FrameCount field (Isochronous)
#define HcTDControl_FRAME_COUNT_SHIFT 24 // shift count for FrameCount (Isochronous)
#define HcTDControl_FRAME_COUNT_MAX 8 // Max number of for frame count per TD
#define HcTDControl_TOGGLE_MASK 0x03000000 // mask for Toggle control field
#define HcTDControl_TOGGLE_FROM_ED 0x00000000 // get data toggle from CARRY field of ED
#define HcTDControl_TOGGLE_DATA0 0x02000000 // use DATA0 for data PID
#define HcTDControl_TOGGLE_DATA1 0x03000000 // use DATA1 for data PID
#define HcTDControl_ERROR_COUNT 0x0C000000 // mask for Error Count field
#define HcTDControl_CONDITION_CODE_MASK 0xF0000000 // mask for ConditionCode field
#define HcTDControl_CONDITION_CODE_SHIFT 28 // shift count for ConditionCode
//
// Definitions for HC_TRANSFER_CONTROL.Direction
//
#define HcTDDirection_Setup 0 // setup packet from host to device
#define HcTDDirection_Out 1 // direction from host to device
#define HcTDDirection_In 2 // direction from device to host
//
// Definitions for Hc_TRANSFER_CONTROL.IntDelay
//
#define HcTDIntDelay_0ms 0 // interrupt at end of frame TD is completed
#define HcTDIntDelay_1ms 1 // Interrupt no later than end of 1st frame after TD is completed
#define HcTDIntDelay_2ms 2 // Interrupt no later than end of 2nd frame after TD is completed
#define HcTDIntDelay_3ms 3 // Interrupt no later than end of 3rd frame after TD is completed
#define HcTDIntDelay_4ms 4 // Interrupt no later than end of 4th frame after TD is completed
#define HcTDIntDelay_5ms 5 // Interrupt no later than end of 5th frame after TD is completed
#define HcTDIntDelay_6ms 6 // Interrupt no later than end of 6th frame after TD is completed
#define HcTDIntDelay_NoInterrupt 7 // do not generate interrupt for normal completion of this TD
//
// Definitions for HC_TRANSFER_CONTROL.Toggle
//
#define HcTDToggle_FromEd 0 // get toggle for Endpoint Descriptor toggle CARRY bit
#define HcTDToggle_Data0 2 // use Data0 PID
#define HcTDToggle_Data1 3 // use Data1 PID
//
// Definitions for HC_TRANSFER_CONTROL.ConditionCode and HC_OFFSET_PSW.ConditionCode
//
#define HcCC_NoError 0x0UL
#define HcCC_CRC 0x1UL
#define HcCC_BitStuffing 0x2UL
#define HcCC_DataToggleMismatch 0x3UL
#define HcCC_Stall 0x4UL
#define HcCC_DeviceNotResponding 0x5UL
#define HcCC_PIDCheckFailure 0x6UL
#define HcCC_UnexpectedPID 0x7UL
#define HcCC_DataOverrun 0x8UL
#define HcCC_DataUnderrun 0x9UL
// 0xA // reserved
// 0xB // reserved
#define HcCC_BufferOverrun 0xCUL
#define HcCC_BufferUnderrun 0xDUL
#define HcCC_NotAccessed 0xEUL
// 0xF // this also means NotAccessed
//
// Host Controller Transfer Descriptor, refer to Section 4.3, Transfer Descriptors
//
typedef struct _HC_TRANSFER_DESCRIPTOR {
HC_TRANSFER_CONTROL; // dword 0
ULONG CBP; // phys ptr to start of buffer
ULONG NextTD; // phys ptr to HC_TRANSFER_DESCRIPTOR
ULONG BE; // phys ptr to end of buffer (last byte)
HC_OFFSET_PSW Packet[8]; // isoch & Control packets
} HC_TRANSFER_DESCRIPTOR, *PHC_TRANSFER_DESCRIPTOR;
//
// HCD Endpoint Descriptor
//
typedef struct _HCD_ENDPOINT_DESCRIPTOR {
HC_ENDPOINT_DESCRIPTOR HcED;
ULONG Pad[4]; // make Physical Address the same as in HCD_TRANSFER_DESCRIPTOR
ULONG PhysicalAddress;
UCHAR ListIndex;
UCHAR PauseFlag;
UCHAR Flags;
UCHAR Reserved[1]; // fill out to 64 bytes
LIST_ENTRY Link;
struct _HCD_ENDPOINT *Endpoint;
ULONG ReclamationFrame;
LIST_ENTRY PausedLink;
#ifdef _WIN64
ULONG Pad24[9]; // file out to 128 bytes
#endif
} HCD_ENDPOINT_DESCRIPTOR, *PHCD_ENDPOINT_DESCRIPTOR;
C_ASSERT((sizeof(HCD_ENDPOINT_DESCRIPTOR) == 64) ||
(sizeof(HCD_ENDPOINT_DESCRIPTOR) == 128));
// Values for HCD_ENDPOINT_DESCRIPTOR->PauseFlag
//
// Used by:
//
// OpenHCI_CancelTDsForED()
// OpenHCI_PauseED()
// OpenHCI_CloseEndpoint()
//
// Normal state. If the endpoint is in this state, OpenHCI_PauseED()
// will set the endpoint sKip bit, else the sKip bit is already set.
//
#define HCD_ED_PAUSE_NOT_PAUSED 0
// Set when OpenHCI_PauseED() is called, which is called either by
// OpenHCI_CancelTransfer() or by OpenHCI_AbortEndpoint().
//
#define HCD_ED_PAUSE_NEEDED 1
// Set when OpenHCI_CancelTDsForED() starts running. If the endpoint is
// still in this state after OpenHCI_CancelTDsForED() has made a pass through
// all of the requests queued on the endpoint, the pause is complete and
// the state is set back to HCD_ED_PAUSE_NOT_PAUSED and the sKip is cleared.
// Else the state is set back to HCD_ED_PAUSE_PROCESSING again and another
// pass is made through all of the requests queued on the endpoints.
//
#define HCD_ED_PAUSE_PROCESSING 2
//
// HCD Transfer Descriptor
//
//
// HCD_TRANSFER_DESCRIPTOR and HCD_ENDPOINT_DESCRIPTOR structures are
// allocated from a common pool and share the Flags field.
//
#define TD_FLAG_INUSE 0x01 // Indicates that the structure is allocated
#define TD_FLAG_IS_ED 0x80 // Indicates that the structure is an ED
// This structure MUST be exactly 64 or 128 bytes long
// we use 128 byte EDs for the 64 bit platform
typedef struct _HCD_TRANSFER_DESCRIPTOR {
HC_TRANSFER_DESCRIPTOR HcTD; /* first 16 bytes */
ULONG PhysicalAddress;
UCHAR BaseIsocURBOffset;
BOOLEAN Canceled;
UCHAR Flags;
UCHAR Reserved[1]; // fill out to 64 bytes
LIST_ENTRY RequestList; /* list of TDs for a req */
struct _HCD_TRANSFER_DESCRIPTOR *NextHcdTD;
PHCD_URB UsbdRequest;
struct _HCD_ENDPOINT *Endpoint;
ULONG TransferCount;
#ifdef _WIN64
ULONG64 _SortNext;
ULONG Pad22[8]; // fill out to 128 bytes
#endif
} HCD_TRANSFER_DESCRIPTOR, *PHCD_TRANSFER_DESCRIPTOR;
C_ASSERT((sizeof(HCD_TRANSFER_DESCRIPTOR) == 64) ||
(sizeof(HCD_TRANSFER_DESCRIPTOR) == 128));
C_ASSERT(sizeof(HCD_ENDPOINT_DESCRIPTOR) == sizeof(HCD_TRANSFER_DESCRIPTOR));
C_ASSERT(FIELD_OFFSET(HCD_ENDPOINT_DESCRIPTOR, PhysicalAddress) ==
FIELD_OFFSET(HCD_TRANSFER_DESCRIPTOR, PhysicalAddress));
C_ASSERT(FIELD_OFFSET(HCD_ENDPOINT_DESCRIPTOR, Flags) ==
FIELD_OFFSET(HCD_TRANSFER_DESCRIPTOR, Flags));
#ifdef _WIN64
#define SortNext _SortNext
#else
#define SortNext HcTD.NextTD
#endif
//
// HCD Endpoint control structure
//
// set when ep is closed successfully
#define EP_CLOSED 0x00000001
// set to if the root hub code owns this ep
#define EP_ROOT_HUB 0x00000002
// need to abort all transfers for this endpoint
#define EP_ABORT 0x00000004
// endpoint needs to be freed
#define EP_FREE 0x00000008
// endpoint has had no transfers submitted,
// restored on reset
#define EP_VIRGIN 0x00000020
// limit endpoint to one outstanding TD
#define EP_ONE_TD 0x00000040
// in active list
#define EP_IN_ACTIVE_LIST 0x00000080
#define SET_EPFLAG(ep, flag) ((ep)->EpFlags |= (flag))
#define CLR_EPFLAG(ep, flag) ((ep)->EpFlags &= ~(flag))
typedef struct _HCD_ENDPOINT {
ULONG Sig;
PHCD_ENDPOINT_DESCRIPTOR HcdED;
PHCD_TRANSFER_DESCRIPTOR HcdHeadP;
PHCD_TRANSFER_DESCRIPTOR HcdTailP;
ULONG EpFlags;
UCHAR Pad[3];
UCHAR Rate;
LIST_ENTRY RequestQueue; // Protected by QueueLock
LIST_ENTRY EndpointListEntry;
LONG EndpointStatus; // Requests currently on HW
LONG MaxRequest; // Max requests allowed on HW
UCHAR Type;
UCHAR ListIndex;
USHORT Bandwidth;
struct _HCD_DEVICE_DATA *DeviceData;
HC_ENDPOINT_CONTROL; // copy of control that is/will be in
ULONG DescriptorsReserved;
KSPIN_LOCK QueueLock; // QueueLock protects RequestQueue
ULONG NextIsoFreeFrame;
ULONG MaxTransfer;
PVOID TrueTail;
PIRP AbortIrp;
} HCD_ENDPOINT, *PHCD_ENDPOINT;
//
// Each Host Controller Endpoint Descriptor is also doubly linked into a list tracked by HCD.
// Each ED queue is managed via an HCD_ED_LIST
//
typedef struct _HCD_ED_LIST {
LIST_ENTRY Head;
PULONG PhysicalHead;
USHORT Bandwidth;
UCHAR Next;
BOOLEAN HcRegister; // PhysicalHead is in a Host Controller register
} HCD_ED_LIST, *PHCD_ED_LIST;
//
// The different ED lists are as follows.
//
#define ED_INTERRUPT_1ms 0
#define ED_INTERRUPT_2ms 1
#define ED_INTERRUPT_4ms 3
#define ED_INTERRUPT_8ms 7
#define ED_INTERRUPT_16ms 15
#define ED_INTERRUPT_32ms 31
#define ED_CONTROL 63
#define ED_BULK 64
#define ED_ISOCHRONOUS 0 // same as 1ms interrupt queue
#define NO_ED_LISTS 65
#define ED_EOF 0xff
//
// HCD Descriptor Page List Entry data structure.
//
// These entries are used to link together the common buffer pages that are
// allocated to hold TD and ED data structures. In addition, the HCCA and the
// static EDs for the interrupt endpoint polling interval tree are contained
// in the first common buffer page that is allocated.
//
typedef struct _PAGE_LIST_ENTRY *PPAGE_LIST_ENTRY;
typedef struct _PAGE_LIST_ENTRY {
PPAGE_LIST_ENTRY NextPage; // NULL terminated list
ULONG BufferSize; // Allocated buffer size
PHYSICAL_ADDRESS PhysAddr; // Base phys address of page
PHYSICAL_ADDRESS FirstTDPhys; // Phys addr of the first TD
PHYSICAL_ADDRESS LastTDPhys; // Phys addr of the last TD
PCHAR VirtAddr; // Base virt address of page
PHCD_TRANSFER_DESCRIPTOR FirstTDVirt; // Virt addr of the first TD
PHCD_TRANSFER_DESCRIPTOR LastTDVirt; // Virt Addr of the last TD
} PAGE_LIST_ENTRY, *PPAGE_LIST_ENTRY;
//values for HcFlags
#define HC_FLAG_REMOTE_WAKEUP_CONNECTED 0x00000001
#define HC_FLAG_LEGACY_BIOS_DETECTED 0x00000002
#define HC_FLAG_SLOW_BULK_ENABLE 0x00000004
#define HC_FLAG_SHUTDOWN 0x00000008 // not really used
#define HC_FLAG_MAP_SX_TO_D3 0x00000010
#define HC_FLAG_IDLE 0x00000020
#define HC_FLAG_DISABLE_IDLE_CHECK 0x00000040
#define HC_FLAG_DEVICE_STARTED 0x00000080
#define HC_FLAG_LOST_POWER 0x00000100
#define HC_FLAG_DISABLE_IDLE_MODE 0x00000200
#define HC_FLAG_USE_HYDRA_HACK 0x00000400
#define HC_FLAG_IN_DPC 0x00000800
#define HC_FLAG_SUSPEND_NEXT_D3 0x00001000
#define HC_FLAG_LIST_FIX_ENABLE 0x00002000
#define HC_FLAG_HUNG_CHECK_ENABLE 0x00004000
#define PENDING_TD_LIST_SIZE 1000
//
// HCD Device Data == Device Extention data
//
typedef struct _HCD_DEVICE_DATA {
UCHAR UsbdWorkArea[sizeof(USBD_EXTENSION)];
ULONG DebugLevel;
ULONG DeviceNameHandle; // handle passed to USBD to generate device name
ULONG HcFlags;
KSPIN_LOCK InterruptSpin; // Spinlock for interrupt
PDEVICE_OBJECT DeviceObject; // point back to device object
PDMA_ADAPTER AdapterObject; // point to our adapter object
ULONG NumberOfMapRegisters;// max number of map registers per transfer
PKINTERRUPT InterruptObject; // Pointer to interrupt object.
KDPC IsrDPC;
PHC_OPERATIONAL_REGISTER HC; // pointer to hw registers
ULONG HClength; // save length for MmUnmapIoSpace
PHCCA_BLOCK HCCA; // pointer to shared memory
KSPIN_LOCK EDListSpin;
// our pool of descriptors
SINGLE_LIST_ENTRY FreeDescriptorList;
ULONG FreeDescriptorCount;
PPAGE_LIST_ENTRY PageList; // pages aquired for descriptors
LIST_ENTRY StalledEDReclamation;
LIST_ENTRY RunningEDReclamation;
LIST_ENTRY PausedEDRestart;
LIST_ENTRY ActiveEndpointList; // list of
// endpoints that
// processing
LONG HcDma;
HCD_ED_LIST EDList[NO_ED_LISTS];
HC_CONTROL CurrentHcControl;
HC_CONTROL ListEnablesAtNextSOF;
HC_FM_INTERVAL OriginalInterval;
ULONG FrameHighPart;
ULONG AvailableBandwidth;
ULONG MaxBandwidthInUse;
ULONG ControlSav;
ULONG BulkSav;
ULONG HcHCCASav;
ULONG LostDoneHeadCount; // Diagnostic aid
ULONG ResurrectHCCount; // Diagnostic aid
ULONG FrozenHcDoneHead;
ULONG LastHccaDoneHead;
ULONGLONG LastDeadmanTime;
KSPIN_LOCK DescriptorsSpin;
KSPIN_LOCK ReclamationSpin;
KSPIN_LOCK PausedSpin;
KSPIN_LOCK HcFlagSpin;
KSPIN_LOCK PageListSpin;
KSPIN_LOCK HcDmaSpin;
LARGE_INTEGER LastIdleTime;
LONG IdleTime;
struct
{ /* A context structure between Isr and Dpc */
ULONG ContextInfo;
ULONG Frame;
} IsrDpc_Context;
BOOLEAN InterruptShare;
UCHAR Pad3[3];
PHYSICAL_ADDRESS cardAddress;
PHCD_ENDPOINT RootHubControl;
PHCD_ENDPOINT RootHubInterrupt; // root hub interrupt endpoint (EP 1)
UCHAR RootHubAddress; // device address of root hub (starts as 0)
ULONG PortsSuspendedAtSuspend;
ULONG PortsEnabledAtSuspend;
DEVICE_POWER_STATE CurrentDevicePowerState;
// When we suspend, the states of the ports are not kept by the host
// controller through the resume. We have to find out what the states
// are and put them back. These are bit masks of the ports that are
// either set enabled or suspended.
//
UCHAR RootHubConfig;
UCHAR NumberOfPorts;
UCHAR Pad2[1];
UCHAR ZeroLoadEndpoint_AddrHolder;
USHORT VendorID;
USHORT DeviceID;
UCHAR RevisionID;
UCHAR Pad[3];
PDEVICE_OBJECT RealPhysicalDeviceObject;
PDEVICE_OBJECT TopOfStackPhysicalDeviceObject;
KTIMER DeadmanTimer;
KDPC DeadmanTimerDPC;
#define ZERO_LOAD_ENDPOINT(DeviceData) \
((PVOID) (&(DeviceData)->ZeroLoadEndpoint_AddrHolder))
//
// We need a memory location that will not be used by any other
// pointer so that we can uniquely identify an endpoint on which there
// is a max packet size of zero. AKA one with no load.
//
LONG OpenCloseSync; // Debugging tool to insure serial
// _OpenEndpoint and _CloseEndpoint
ULONG FakePortChange; // Per port bitmap
ULONG FakePortDisconnect; // Per port bitmap
} HCD_DEVICE_DATA, *PHCD_DEVICE_DATA;
typedef struct _OHCI_RESOURCES {
ULONG InterruptVector;
KIRQL InterruptLevel;
KAFFINITY Affinity;
BOOLEAN ShareIRQ;
KINTERRUPT_MODE InterruptMode;
} OHCI_RESOURCES, *POHCI_RESOURCES;
#define OHCI_MAP_INIT 0x01
typedef struct _MAP_CONTEXT {
BOOLEAN Mapped;
UCHAR Flags;
UCHAR Pad[2];
PHYSICAL_ADDRESS PhysAddress;
ULONG LengthMapped;
PVOID CurrentVa;
PVOID MapRegisterBase;
ULONG TotalLength;
} MAP_CONTEXT, *PMAP_CONTEXT;
typedef struct _KeSync_HcControl
{
PHCD_DEVICE_DATA DeviceData;
HC_CONTROL NewHcControl;
} KeSynch_HcControl, *PKeSynch_HcControl;
#ifdef DEBUG_LOG
#ifdef IRP_LOG
#define IRP_IN(i) OHCI_LogIrp((i), 1)
#define IRP_OUT(i) OHCI_LogIrp((i), 0)
#else
#define IRP_IN(i)
#define IRP_OUT(i)
#endif
#define LOGENTRY(m, sig, info1, info2, info3) \
OHCI_Debug_LogEntry(m, sig, (ULONG_PTR)info1, \
(ULONG_PTR)info2, \
(ULONG_PTR)info3)
#define LOGIRQL() LOGENTRY(G, 'IRQL', KeGetCurrentIrql(), 0, 0);
VOID
OHCI_Debug_LogEntry(
IN ULONG Mask,
IN ULONG Sig,
IN ULONG_PTR Info1,
IN ULONG_PTR Info2,
IN ULONG_PTR Info3
);
VOID
OHCI_LogInit(
);
VOID
OHCI_LogFree(
VOID
);
#else
#define LOGENTRY(mask, sig, info1, info2, info3)
#define OHCI_LogInit()
#define OHCI_LogFree()
#define LOGIRQL()
#define IRP_IN(i)
#define IRP_OUT(i)
#endif
#define ENABLE_LIST(hc, ep) \
{ \
ULONG listFilled = 0;\
ULONG temp;\
ASSERT_ENDPOINT(ep);\
\
temp = READ_REGISTER_ULONG (&(hc)->HcControlHeadED);\
if (temp) {\
listFilled |= HcCmd_ControlListFilled;\
}\
temp = READ_REGISTER_ULONG (&(hc)->HcBulkHeadED);\
if (temp) {\
listFilled |= HcCmd_BulkListFilled;\
}\
if (USB_ENDPOINT_TYPE_BULK == (ep)->Type) {\
listFilled |= HcCmd_BulkListFilled;\
} else if (USB_ENDPOINT_TYPE_CONTROL == (ep)->Type) {\
listFilled |= HcCmd_ControlListFilled;\
}\
WRITE_REGISTER_ULONG(&(hc)->HcCommandStatus.ul,\
listFilled);\
LOGENTRY(G, 'enaL', listFilled, ep, 0); \
};
//
// Function Prototypes
//
BOOLEAN OpenHCI_InterruptService (IN PKINTERRUPT Interrupt,
IN void * ServiceContext);
NTSTATUS OpenHCI_URB_Dispatch (IN PDEVICE_OBJECT, IN PIRP);
ULONG Get32BitFrameNumber (PHCD_DEVICE_DATA);
PHCD_ENDPOINT_DESCRIPTOR InsertEDForEndpoint (IN PHCD_DEVICE_DATA, IN PHCD_ENDPOINT, IN UCHAR,
IN PHCD_TRANSFER_DESCRIPTOR *);
PHCD_TRANSFER_DESCRIPTOR
OpenHCI_Alloc_HcdTD(
PHCD_DEVICE_DATA DeviceData
);
VOID
OpenHCI_Free_HcdTD(
PHCD_DEVICE_DATA DeviceData,
PHCD_TRANSFER_DESCRIPTOR Td
);
PHCD_ENDPOINT_DESCRIPTOR
OpenHCI_Alloc_HcdED(
PHCD_DEVICE_DATA DeviceData
);
VOID
OpenHCI_Free_HcdED(
PHCD_DEVICE_DATA DeviceData,
PHCD_ENDPOINT_DESCRIPTOR Ed
);
PHCD_TRANSFER_DESCRIPTOR
OpenHCI_LogDesc_to_PhyDesc (PHCD_DEVICE_DATA, ULONG);
void OpenHCI_PauseED (PHCD_ENDPOINT);
BOOLEAN OpenHCI_InterruptService (PKINTERRUPT, void *);
void OpenHCI_IsrDPC (PKDPC, PVOID, PVOID, PVOID);
void OpenHCI_CompleteIrp(PDEVICE_OBJECT, PIRP, NTSTATUS);
BOOLEAN OpenHCI_StartController (PVOID context);
void OpenHCI_StartEndpoint (PHCD_ENDPOINT);
NTSTATUS OpenHCI_StartTransfer (PDEVICE_OBJECT, PIRP);
NTSTATUS OpenHCI_RootHubStartXfer (PDEVICE_OBJECT, PHCD_DEVICE_DATA, PIRP, PHCD_URB, PHCD_ENDPOINT);
BOOLEAN OpenHCI_HcControl_OR (PVOID);
BOOLEAN OpenHCI_HcControl_AND (PVOID);
BOOLEAN OpenHCI_HcControl_SetHCFS (PVOID);
BOOLEAN OpenHCI_ListEnablesAtNextSOF (PVOID);
void OpenHCI_CancelTransfer (PDEVICE_OBJECT, PIRP);
NTSTATUS OpenHCI_AbortEndpoint(PDEVICE_OBJECT, PIRP, PHCD_DEVICE_DATA, PHCD_URB);
void EmulateRootHubInterruptXfer(PHCD_DEVICE_DATA, PHC_OPERATIONAL_REGISTER);
NTSTATUS CheckRootHub(PHCD_DEVICE_DATA , PHC_OPERATIONAL_REGISTER HC, PHCD_URB);
//jd
VOID
RemoveEDForEndpoint(
IN PHCD_ENDPOINT
);
NTSTATUS
OpenHCI_SetDevicePowerState(
IN PDEVICE_OBJECT,
IN PIRP,
IN DEVICE_POWER_STATE
);
NTSTATUS
OpenHCI_DeferredStartDevice(
IN PDEVICE_OBJECT,
IN PIRP
);
NTSTATUS
OpenHCI_DeferIrpCompletion(
PDEVICE_OBJECT,
PIRP,
PVOID
);
NTSTATUS
OpenHCI_StartDevice(
IN PDEVICE_OBJECT,
IN POHCI_RESOURCES
);
NTSTATUS
OpenHCI_QueryCapabilities(
PDEVICE_OBJECT,
PDEVICE_CAPABILITIES
);
NTSTATUS
OpenHCI_PnPAddDevice(
IN PDRIVER_OBJECT DriverObject,
IN PDEVICE_OBJECT PhysicalDeviceObject
);
NTSTATUS
OpenHCI_SaveHCstate(
PHCD_DEVICE_DATA
);
NTSTATUS
OpenHCI_RestoreHCstate(
PHCD_DEVICE_DATA,
PBOOLEAN
);
NTSTATUS
OpenHCI_DeferPoRequestCompletion(
IN PDEVICE_OBJECT,
IN UCHAR,
IN POWER_STATE,
IN PVOID,
IN PIO_STATUS_BLOCK
);
NTSTATUS
OpenHCI_RootHubPower(
IN PDEVICE_OBJECT,
IN PIRP
);
NTSTATUS
OpenHCI_ReserveDescriptors(
IN PHCD_DEVICE_DATA,
IN ULONG
);
NTSTATUS
OpenHCI_QueueTransfer(
PDEVICE_OBJECT ,
PIRP
);
NTSTATUS
OpenHCI_Dispatch(
IN PDEVICE_OBJECT ,
IN PIRP
);
VOID
OpenHCI_Unload(
IN PDRIVER_OBJECT
);
VOID
OpenHCI_SetTranferError(
PHCD_URB,
NTSTATUS
);
VOID
OpenHCI_EndpointWorker(
PHCD_ENDPOINT
);
NTSTATUS
OpenHCI_GrowDescriptorPool (
IN PHCD_DEVICE_DATA DeviceData,
IN ULONG ReserveLength,
OUT PCHAR *VirtAddr OPTIONAL,
OUT PHYSICAL_ADDRESS *PhysAddr OPTIONAL
);
VOID
OpenHCI_LockAndCheckEndpoint(
PHCD_ENDPOINT ,
PBOOLEAN ,
PBOOLEAN ,
PKIRQL
);
VOID
OpenHCI_UnlockEndpoint(
PHCD_ENDPOINT ,
KIRQL
);
BOOLEAN
OpenHCI_StopController(
IN PVOID
);
NTSTATUS
OpenHCI_StopDevice(
IN PDEVICE_OBJECT DeviceObject,
IN BOOLEAN TouchTheHardware
);
NTSTATUS
OpenHCI_Shutdown(
IN PDEVICE_OBJECT DeviceObject
);
NTSTATUS
OpenHCI_StartBIOS(
IN PDEVICE_OBJECT DeviceObject
);
NTSTATUS
OpenHCI_StopBIOS(
IN PDEVICE_OBJECT DeviceObject
);
NTSTATUS
OpenHCI_GetSOFRegModifyValue(
IN PDEVICE_OBJECT DeviceObject,
IN OUT PULONG SofModifyValue
);
NTSTATUS
OpenHCI_GetRegFlags(
IN PDEVICE_OBJECT DeviceObject,
IN OUT PULONG SofModifyValue
);
VOID
OpenHCI_DeadmanDPC(
PKDPC Dpc,
PVOID DeviceObject,
PVOID Context1,
PVOID Context2
);
NTSTATUS
OpenHCI_InsertMagicEDs(
IN PDEVICE_OBJECT DeviceObject
);
NTSTATUS
OpenHCI_ResurrectHC(
PHCD_DEVICE_DATA DeviceData
);
ULONG
FindLostDoneHead (
IN PHCD_DEVICE_DATA DeviceData
);
PHYSICAL_ADDRESS
OpenHCI_IoMapTransfer(
IN PMAP_CONTEXT MapContext,
IN PDMA_ADAPTER DmaAdapter,
IN PMDL Mdl,
IN PVOID MapRegisterBase,
IN PVOID CurrentVa,
IN OUT PULONG Length,
IN ULONG TotalLength,
IN BOOLEAN WriteToDevice
);
NTSTATUS
OpenHCI_ExternalGetCurrentFrame(
IN PDEVICE_OBJECT DeviceObject,
IN PULONG CurrentFrame
);
ULONG
OpenHCI_ExternalGetConsumedBW(
IN PDEVICE_OBJECT DeviceObject
);
BOOLEAN
OpenHCI_RhPortsIdle(
PHCD_DEVICE_DATA DeviceData
);
VOID
OpenHCI_ProcessEndpoint(
PHCD_DEVICE_DATA DeviceData,
PHCD_ENDPOINT Endpoint
);
NTSTATUS
OpenHCI_Resume(
PDEVICE_OBJECT DeviceObject,
BOOLEAN LostPower
);
ULONG
ReadPortStatusFix(
PHCD_DEVICE_DATA DeviceData,
ULONG PortIndex
);
#endif /* OPENHCI_H */
Reference in a new issue View git blame Copy permalink