windows-nt/Source/XPSP1/NT/published/sdk/inc/nb30.h
2020-09-26 16:20:57 +08:00

317 lines
12 KiB
C

//*++
//
// Copyright (c) 1991-1999 Microsoft Corporation
//
// Module Name:
//
// nb30.h
//
// Abstract:
//
// This module contains the definitions for portable NetBIOS 3.0
// support.
//
//--*/
#ifndef NCB_INCLUDED
#define NCB_INCLUDED
#if _MSC_VER > 1000
#pragma once
#endif
#ifdef __cplusplus
extern "C" {
#endif
/****************************************************************
* *
* Data structure templates *
* *
****************************************************************/
#define NCBNAMSZ 16 /* absolute length of a net name */
#define MAX_LANA 254 /* lana's in range 0 to MAX_LANA inclusive */
/*
* Network Control Block
*/
typedef struct _NCB {
UCHAR ncb_command; /* command code */
UCHAR ncb_retcode; /* return code */
UCHAR ncb_lsn; /* local session number */
UCHAR ncb_num; /* number of our network name */
PUCHAR ncb_buffer; /* address of message buffer */
WORD ncb_length; /* size of message buffer */
UCHAR ncb_callname[NCBNAMSZ]; /* blank-padded name of remote */
UCHAR ncb_name[NCBNAMSZ]; /* our blank-padded netname */
UCHAR ncb_rto; /* rcv timeout/retry count */
UCHAR ncb_sto; /* send timeout/sys timeout */
void (CALLBACK *ncb_post)( struct _NCB * ); /* POST routine address */
UCHAR ncb_lana_num; /* lana (adapter) number */
UCHAR ncb_cmd_cplt; /* 0xff => commmand pending */
#ifdef _WIN64
UCHAR ncb_reserve[18]; /* reserved, used by BIOS */
#else
UCHAR ncb_reserve[10]; /* reserved, used by BIOS */
#endif
HANDLE ncb_event; /* HANDLE to Win32 event which */
/* will be set to the signalled */
/* state when an ASYNCH command */
/* completes */
} NCB, *PNCB;
/*
* Structure returned to the NCB command NCBASTAT is ADAPTER_STATUS followed
* by an array of NAME_BUFFER structures.
*/
typedef struct _ADAPTER_STATUS {
UCHAR adapter_address[6];
UCHAR rev_major;
UCHAR reserved0;
UCHAR adapter_type;
UCHAR rev_minor;
WORD duration;
WORD frmr_recv;
WORD frmr_xmit;
WORD iframe_recv_err;
WORD xmit_aborts;
DWORD xmit_success;
DWORD recv_success;
WORD iframe_xmit_err;
WORD recv_buff_unavail;
WORD t1_timeouts;
WORD ti_timeouts;
DWORD reserved1;
WORD free_ncbs;
WORD max_cfg_ncbs;
WORD max_ncbs;
WORD xmit_buf_unavail;
WORD max_dgram_size;
WORD pending_sess;
WORD max_cfg_sess;
WORD max_sess;
WORD max_sess_pkt_size;
WORD name_count;
} ADAPTER_STATUS, *PADAPTER_STATUS;
typedef struct _NAME_BUFFER {
UCHAR name[NCBNAMSZ];
UCHAR name_num;
UCHAR name_flags;
} NAME_BUFFER, *PNAME_BUFFER;
// values for name_flags bits.
#define NAME_FLAGS_MASK 0x87
#define GROUP_NAME 0x80
#define UNIQUE_NAME 0x00
#define REGISTERING 0x00
#define REGISTERED 0x04
#define DEREGISTERED 0x05
#define DUPLICATE 0x06
#define DUPLICATE_DEREG 0x07
/*
* Structure returned to the NCB command NCBSSTAT is SESSION_HEADER followed
* by an array of SESSION_BUFFER structures. If the NCB_NAME starts with an
* asterisk then an array of these structures is returned containing the
* status for all names.
*/
typedef struct _SESSION_HEADER {
UCHAR sess_name;
UCHAR num_sess;
UCHAR rcv_dg_outstanding;
UCHAR rcv_any_outstanding;
} SESSION_HEADER, *PSESSION_HEADER;
typedef struct _SESSION_BUFFER {
UCHAR lsn;
UCHAR state;
UCHAR local_name[NCBNAMSZ];
UCHAR remote_name[NCBNAMSZ];
UCHAR rcvs_outstanding;
UCHAR sends_outstanding;
} SESSION_BUFFER, *PSESSION_BUFFER;
// Values for state
#define LISTEN_OUTSTANDING 0x01
#define CALL_PENDING 0x02
#define SESSION_ESTABLISHED 0x03
#define HANGUP_PENDING 0x04
#define HANGUP_COMPLETE 0x05
#define SESSION_ABORTED 0x06
/*
* Structure returned to the NCB command NCBENUM.
*
* On a system containing lana's 0, 2 and 3, a structure with
* length =3, lana[0]=0, lana[1]=2 and lana[2]=3 will be returned.
*/
typedef struct _LANA_ENUM {
UCHAR length; // Number of valid entries in lana[]
UCHAR lana[MAX_LANA+1];
} LANA_ENUM, *PLANA_ENUM;
/*
* Structure returned to the NCB command NCBFINDNAME is FIND_NAME_HEADER followed
* by an array of FIND_NAME_BUFFER structures.
*/
typedef struct _FIND_NAME_HEADER {
WORD node_count;
UCHAR reserved;
UCHAR unique_group;
} FIND_NAME_HEADER, *PFIND_NAME_HEADER;
typedef struct _FIND_NAME_BUFFER {
UCHAR length;
UCHAR access_control;
UCHAR frame_control;
UCHAR destination_addr[6];
UCHAR source_addr[6];
UCHAR routing_info[18];
} FIND_NAME_BUFFER, *PFIND_NAME_BUFFER;
/*
* Structure provided with NCBACTION. The purpose of NCBACTION is to provide
* transport specific extensions to netbios.
*/
typedef struct _ACTION_HEADER {
ULONG transport_id;
USHORT action_code;
USHORT reserved;
} ACTION_HEADER, *PACTION_HEADER;
// Values for transport_id
#define ALL_TRANSPORTS "M\0\0\0"
#define MS_NBF "MNBF"
/****************************************************************
* *
* Special values and constants *
* *
****************************************************************/
/*
* NCB Command codes
*/
#define NCBCALL 0x10 /* NCB CALL */
#define NCBLISTEN 0x11 /* NCB LISTEN */
#define NCBHANGUP 0x12 /* NCB HANG UP */
#define NCBSEND 0x14 /* NCB SEND */
#define NCBRECV 0x15 /* NCB RECEIVE */
#define NCBRECVANY 0x16 /* NCB RECEIVE ANY */
#define NCBCHAINSEND 0x17 /* NCB CHAIN SEND */
#define NCBDGSEND 0x20 /* NCB SEND DATAGRAM */
#define NCBDGRECV 0x21 /* NCB RECEIVE DATAGRAM */
#define NCBDGSENDBC 0x22 /* NCB SEND BROADCAST DATAGRAM */
#define NCBDGRECVBC 0x23 /* NCB RECEIVE BROADCAST DATAGRAM */
#define NCBADDNAME 0x30 /* NCB ADD NAME */
#define NCBDELNAME 0x31 /* NCB DELETE NAME */
#define NCBRESET 0x32 /* NCB RESET */
#define NCBASTAT 0x33 /* NCB ADAPTER STATUS */
#define NCBSSTAT 0x34 /* NCB SESSION STATUS */
#define NCBCANCEL 0x35 /* NCB CANCEL */
#define NCBADDGRNAME 0x36 /* NCB ADD GROUP NAME */
#define NCBENUM 0x37 /* NCB ENUMERATE LANA NUMBERS */
#define NCBUNLINK 0x70 /* NCB UNLINK */
#define NCBSENDNA 0x71 /* NCB SEND NO ACK */
#define NCBCHAINSENDNA 0x72 /* NCB CHAIN SEND NO ACK */
#define NCBLANSTALERT 0x73 /* NCB LAN STATUS ALERT */
#define NCBACTION 0x77 /* NCB ACTION */
#define NCBFINDNAME 0x78 /* NCB FIND NAME */
#define NCBTRACE 0x79 /* NCB TRACE */
#define ASYNCH 0x80 /* high bit set == asynchronous */
/*
* NCB Return codes
*/
#define NRC_GOODRET 0x00 /* good return */
/* also returned when ASYNCH request accepted */
#define NRC_BUFLEN 0x01 /* illegal buffer length */
#define NRC_ILLCMD 0x03 /* illegal command */
#define NRC_CMDTMO 0x05 /* command timed out */
#define NRC_INCOMP 0x06 /* message incomplete, issue another command */
#define NRC_BADDR 0x07 /* illegal buffer address */
#define NRC_SNUMOUT 0x08 /* session number out of range */
#define NRC_NORES 0x09 /* no resource available */
#define NRC_SCLOSED 0x0a /* session closed */
#define NRC_CMDCAN 0x0b /* command cancelled */
#define NRC_DUPNAME 0x0d /* duplicate name */
#define NRC_NAMTFUL 0x0e /* name table full */
#define NRC_ACTSES 0x0f /* no deletions, name has active sessions */
#define NRC_LOCTFUL 0x11 /* local session table full */
#define NRC_REMTFUL 0x12 /* remote session table full */
#define NRC_ILLNN 0x13 /* illegal name number */
#define NRC_NOCALL 0x14 /* no callname */
#define NRC_NOWILD 0x15 /* cannot put * in NCB_NAME */
#define NRC_INUSE 0x16 /* name in use on remote adapter */
#define NRC_NAMERR 0x17 /* name deleted */
#define NRC_SABORT 0x18 /* session ended abnormally */
#define NRC_NAMCONF 0x19 /* name conflict detected */
#define NRC_IFBUSY 0x21 /* interface busy, IRET before retrying */
#define NRC_TOOMANY 0x22 /* too many commands outstanding, retry later */
#define NRC_BRIDGE 0x23 /* ncb_lana_num field invalid */
#define NRC_CANOCCR 0x24 /* command completed while cancel occurring */
#define NRC_CANCEL 0x26 /* command not valid to cancel */
#define NRC_DUPENV 0x30 /* name defined by anther local process */
#define NRC_ENVNOTDEF 0x34 /* environment undefined. RESET required */
#define NRC_OSRESNOTAV 0x35 /* required OS resources exhausted */
#define NRC_MAXAPPS 0x36 /* max number of applications exceeded */
#define NRC_NOSAPS 0x37 /* no saps available for netbios */
#define NRC_NORESOURCES 0x38 /* requested resources are not available */
#define NRC_INVADDRESS 0x39 /* invalid ncb address or length > segment */
#define NRC_INVDDID 0x3B /* invalid NCB DDID */
#define NRC_LOCKFAIL 0x3C /* lock of user area failed */
#define NRC_OPENERR 0x3f /* NETBIOS not loaded */
#define NRC_SYSTEM 0x40 /* system error */
#define NRC_PENDING 0xff /* asynchronous command is not yet finished */
/****************************************************************
* *
* main user entry point for NetBIOS 3.0 *
* *
* Usage: result = Netbios( pncb ); *
****************************************************************/
UCHAR
APIENTRY
Netbios(
PNCB pncb
);
/****************************************************************
* *
* Prefix for callback routines *
* *
* Usage in a declaration: NCB_POST MyPostRoutine( PNCB pncb ); *
****************************************************************/
#define NCB_POST void CALLBACK
#ifdef __cplusplus
}
#endif
#endif /* NCB_INCLUDED */