able/windows-nt
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
windows-nt/Source/XPSP1/NT/sdktools/cntrtext/perfini/usa/perfh009.ini
CryptoAlgo Inc b3cac27891 Add source files
2020-09-26 16:20:57 +08:00

3191 lines
171 KiB
INI
Raw Permalink Blame History

"3", "The System performance object consists of counters that apply "
"to more than one instance of a component processors on the "
"computer. ",
"5", "The Memory performance object consists of counters that "
"describe the behavior of physical and virtual memory on the "
"computer. Physical memory is the amount of random access "
"memory on the computer. Virtual memory consists of the space "
"in physical memory and on disk. Many of the memory counters "
"monitor paging, which is the movement of pages of code and "
"data between disk and physical memory. Excessive paging, a "
"symptom of a memory shortage, can cause delays which "
"interfere with all system processes.",
"7", "% Processor Time is the percentage of time that the processor "
"is executing a non-Idle thread. This counter was designed as "
"a primary indicator of processor activity. It is calculated "
"by measuring the time that the processor spends executing the "
"thread of the Idle process in each sample interval, and "
"subtracting that value from 100%. (Each processor has an Idle "
"thread which consumes cycles when no other threads are ready "
"to run). It can be viewed as the percentage of the sample "
"interval spent doing useful work. This counter displays the "
"average percentage of busy time observed during the sample "
"interval. It is calculated by monitoring the time the service "
"was inactive, and then subtracting that value from 100%.",
"9", "% Total DPC Time is the average percentage of time that all "
"processors spent receiving and servicing deferred procedure "
"calls (DPCs). (DPCs are interrupts that run at a lower "
"priority than the standard interrupts). It is the sum of "
"Processor: % DPC Time for all processors on the computer, "
"divided by the number of processors. System: % Total DPC Time "
"is a component of System: % Total Privileged Time because "
"DPCs are executed in privileged mode. DPCs are counted "
"separately and are not a component of the interrupt count. "
"This counter displays the average busy time as a percentage "
"of the sample time.",
"11", "File Read Operations/sec is the combined rate of file system "
"read requests to all devices on the computer, including "
"requests to read from the file system cache. It is measured "
"in numbers of reads. This counter displays the difference "
"between the values observed in the last two samples, divided "
"by the duration of the sample interval. ",
"13", "File Write Operations/sec is the combined rate of the file "
"system write requests to all devices on the computer, "
"including requests to write to data in the file system cache. "
"It is measured in numbers of writes. This counter displays "
"the difference between the values observed in the last two "
"samples, divided by the duration of the sample interval.",
"15", "File Control Operations/sec is the combined rate of file "
"system operations that are neither reads nor writes, such as "
"file system control requests and requests for information "
"about device characteristics or status. This is the inverse "
"of System: File Data Operations/sec and is measured in "
"number of operations perf second. This counter displays the "
"difference between the values observed in the last two samples, "
"divided by the duration of the sample interval. ",
"17", "File Read Bytes/sec is the overall rate at which bytes are "
"read to satisfy file system read requests to all devices on "
"the computer, including reads from the file system cache. It "
"is measured in number of bytes per second. This counter displays the "
"difference between the values observed in the last two "
"samples, divided by the duration of the sample interval. ",
"19", "File Write Bytes/sec is the overall rate at which bytes are "
"written to satisfy file system write requests to all devices "
"on the computer, including writes to the file system cache. "
"It is measured in number of bytes per second. This counter displays the "
"difference between the values observed in the last two "
"samples, divided by the duration of the sample interval. ",
"21", "File Control Bytes/sec is the overall rate at which bytes "
"are transferred for all file system operations that are "
"neither reads nor writes, including file system control "
"requests and requests for information about device "
"characteristics or status. It is measured in numbers of "
"bytes. This counter displays the difference between the "
"values observed in the last two samples, divided by the "
"duration of the sample interval. ",
"23", "% Total Interrupt Time is the average percentage of time that "
"all processors spent servicing interrupts. It is the sum of "
"Processor: % Interrupt Time for of all processors on the "
"computer, divided by the number of processors. DPCs are "
"counted separately and are not a component of the interrupt "
"count. This value is an indirect indicator of the activity of "
"devices that generate interrupts, such as the system timer, "
"the mouse, disk drivers, data communication lines, network "
"interface cards and other peripheral devices. ",
"25", "Available Bytes is the amount of physical memory available "
"to processes running on the computer, in bytes. It is "
"calculated by summing space on the Zeroed, Free, and Stand by "
"memory lists. Free memory is ready for use; Zeroed memory are "
"pages of memory filled with zeros to prevent later processes "
"from seeing data used by a previous process. Standby memory "
"is memory removed from a process' working set (its physical "
"memory) on route to disk, but is still available to be "
"recalled. This counter displays the last observed value only; "
"it is not an average. ",
"27", "Committed Bytes is the amount of committed virtual memory, in "
"bytes. (Committed memory is physical memory for which space "
"has been reserved on the disk paging file in case it needs to "
"be written back to disk). This counter displays the last "
"observed value only; it is not an average. ",
"29", "Page Faults/sec is the overall rate at which faulted pages "
"are handled by the processor. It is measured in numbers of "
"pages faulted per second. A page fault occurs when a process "
"requires code or data that is not in its working set "
"(its space in physical memory). This counter includes both "
"hard faults (those that require disk access) and soft faults "
"(where the faulted page is found elsewhere in physical memory.) "
"Most processors can handle large numbers of soft faults "
"without consequence. However, hard faults, which require "
"disk access, can cause significant delays. This counter "
"displays the difference between the values observed in the "
"last two samples, divided by the duration of the sample "
"interval. ",
"31", "Commit Limit is the amount of virtual memory that can be "
"committed without having to extend the paging file(s). It is "
"measured in bytes. (Committed memory is physical memory for "
"which space has been reserved on the disk paging files. There "
"can be one paging file on each logical drive). If the paging "
"file(s) are be expanded, this limit increases accordingly. "
"This counter displays the last observed value only; it is not "
"an average. ",
"33", "Write Copies/sec is the number of page faults caused by "
"attempts to write that have been satisfied by coping of the "
"page from elsewhere in physical memory. This is an economical "
"way of sharing data since pages are only copied when they are "
"written to; otherwise, the page is shared. This counter "
"counts the number of copies, without regard for the number of "
"pages copied in each operation. This counter displays the "
"difference between the values observed in the last two "
"samples, divided by the duration of the sample interval. ",
"35", "Transition Faults/sec is the number of page faults resolved "
"by recovering pages that were on the modified page list, on "
"the standby list, or being written to disk at the time of the "
"page fault. The pages were recovered without additional disk "
"activity. Transition faults are counted in numbers of faults, "
"without regard for the number of pages faulted in each "
"operation. This counter displays the difference between the "
"values observed in the last two samples, divided by the "
"duration of the sample interval. ",
"37", "Cache Faults/sec is the number of faults which occur when a "
"page sought in the file system cache is not found there and "
"must be retrieved from elsewhere in memory (a soft fault) or "
"from disk (a hard fault). The file system cache is an area of "
"physical memory that stores recently used pages of data for "
"applications. Cache activity is a reliable indicator of most "
"application I/O operations. This counter counts the number of "
"faults, without regard for the number of pages faulted in each "
"operation.",
"39", "Demand Zero Faults/sec is the number of page faults that "
"require a zeroed page to satisfy the fault. Zeroed pages, "
"pages emptied of previously stored data and filled with "
"zeros, are a security feature of Windows NT. They prevent "
"processes from seeing data stored by earlier processes that "
"used the memory space. Windows NT maintains a list of zeroed "
"pages to accelerate this process. This counter counts numbers "
"of faults, without regard to the numbers of pages retrieved "
"to satisfy the fault. This counter displays the difference "
"between the values observed in the last two samples, divided "
"by the duration of the sample interval. ",
"41", "Pages/sec is the number of pages read from or written to disk "
"to resolve hard page faults. (Hard page faults occur when a "
"process requires code or data that is not in its working set "
"or elsewhere in physical memory, and must be retrieved from "
"disk). This counter was designed as a primary indicator of "
"the kinds of faults that cause system-wide delays. It is the "
"sum of Memory: Pages Input/sec and Memory: Pages Output/sec. "
"It is counted in numbers of pages, so it can be compared to "
"other counts of pages, such as Memory: Page Faults/sec, "
"without conversion. It includes pages retrieved to satisfy "
"faults in the file system cache (usually requested by "
"applications) non-cached mapped memory files. This counter "
"displays the difference between the values observed in the "
"last two samples, divided by the duration of the sample "
"interval. ",
"43", "Page Reads/sec is the number of times the disk was read to "
"resolve hard page faults. (Hard page faults occur when a "
"process requires code or data that is not in its working set "
"or elsewhere in physical memory, and must be retrieved from "
"disk). This counter was designed as a primary indicator of "
"the kinds of faults that cause system-wide delays. It "
"includes reads to satisfy faults in the file system cache "
"(usually requested by applications) and in non-cached mapped "
"memory files. This counter counts numbers of read operations, "
"without regard to the numbers of pages retrieved by each "
"operation. This counter displays the difference between the "
"values observed in the last two samples, divided by the "
"duration of the sample interval. ",
"45", "Processor Queue Length is the number of threads in the "
"processor queue. There is a single queue for processor time "
"even on computers with multiple processors. Unlike the disk "
"counters, this counter counts ready threads only, not threads "
"that are running. A sustained processor queue of greater "
"than two threads generally indicates processor congestion. "
"This counter displays the last observed value only; it is not "
"an average.",
"47", "Thread State is the current state of the thread. It is 0 for "
"Initialized, 1 for Ready, 2 for Running, 3 for Standby, 4 for "
"Terminated, 5 for Wait, 6 for Transition, 7 for Unknown. A "
"Running thread is using a processor; a Standby thread is "
"about to use one. A Ready thread wants to use a processor, "
"but is waiting for a processor because none are free. A "
"thread in Transition is waiting for a resource in order to "
"execute, such as waiting for its execution stack to be paged "
"in from disk. A Waiting thread has no use for the processor "
"because it is waiting for a peripheral operation to complete "
"or a resource to become free.",
"49", "Pages Output/sec is the number of pages written to disk to "
"free up space in physical memory. Pages are written back to "
"disk only if they are changed in physical memory, so they are "
"likely to hold data, not code. A high rate of pages output "
"might indicate a memory shortage. Windows NT writes more "
"pages back to disk to free up space when physical memory is "
"in short supply. This counter counts numbers of pages, and "
"can be compared to other counts of pages, without conversion. "
"This counter displays the difference between the values "
"observed in the last two samples, divided by the duration of "
"the sample interval. ",
"51", "Page Writes/sec is the number of times pages were written to "
"disk to free up space in physical memory. Pages are written "
"to disk only if they are changed while in physical memory, so "
"they are likely to hold data, not code. This counter counts "
"write operations, without regard to the number of pages "
"written in each operation. This counter displays the "
"difference between the values observed in the last two "
"samples, divided by the duration of the sample interval. ",
"53", "The Browser performance object consists of counters that "
"measure the rates of announcements, enumerations, and other "
"Browser transmissions.",
"55", "Announcements Server/sec is the rate at which the servers in "
"this domain have announced themselves to this server.",
"57", "Pool Paged Bytes is the number of bytes in the paged pool, an "
"area of system memory (physical memory used by the operating "
"system) for objects that can be written to disk when they are "
"not being used. Memory: Pool Paged Bytes is calculated "
"differently than Process: Pool Paged Bytes, so it might not "
"equal Process: Pool Paged Bytes: _Total. This counter "
"displays the last observed value only; it is not an average. ",
"59", "Pool Nonpaged Bytes is the number of bytes in the nonpaged "
"pool, an area of system memory (physical memory used by the "
"operating system) for objects that cannot be written to disk, "
"but must remain in physical memory as long as they are "
"allocated. Memory: Pool Nonpaged Bytes is calculated "
"differently than Process: Pool Nonpaged Bytes, so it might "
"not equal Process: Pool Nonpaged Bytes: _Total. This counter "
"displays the last observed value only; it is not an average. ",
"61", "Pool Paged Allocs is the number of calls to allocate space in "
"the paged pool. The paged pool is an area of system memory "
"(physical memory used by the operating system) for objects "
"that can be written to disk when they are not being used. It "
"is measured in numbers of calls to allocate space, regardless "
"of the amount of space allocated in each call. This counter "
"displays the last observed value only; it is not an average.",
"63", "Pool Paged Resident Bytes is the current size of paged pool "
"in bytes. The paged pool is an area of system memory "
"(physical memory used by the operating system) for objects "
"that can be written to disk when they are not being used. "
"Space used by the paged and nonpaged pools are taken from "
"physical memory, so a pool that is too large denies memory "
"space to processes. This counter displays the last observed "
"value only; it is not an average. ",
"65", "Pool Nonpaged Allocs is the number of calls to allocate space "
"in the nonpaged pool. The nonpaged pool is an area of system "
"memory area for objects that cannot be written to disk, and "
"must remain in physical memory as long as they are allocated. "
"It is measured in numbers of calls to allocate space, "
"regardless of the amount of space allocated in each call. "
"This counter displays the last observed value only; it is not "
"an average.",
"67", "Bytes Total/sec is the sum of Frame Bytes/sec and Datagram "
"Bytes/sec. This is the total rate of bytes sent to or "
"received from the network by the protocol, but only counts "
"the bytes in frames (i.e., packets) which carry data.",
"69", "System Code Total Bytes is the number of bytes of pageable "
"operating system code currently in virtual memory. It is a "
"measure of the amount of physical memory being used by the "
"operating system that can be written to disk when not in use. "
"This value is calculated by summing the bytes in "
"Ntoskrnl.exe, Hal.dll, the boot drivers, and file systems "
"loaded by Ntldr/osloader. This counter does not include code "
"that must remain in physical memory and cannot be written to "
"disk. This counter displays the last observed value only; it "
"is not an average. ",
"71", "System Code Resident Bytes is the number of bytes of "
"operating system code currently in physical memory that can "
"be written to disk when not in use. This value is a component "
"of System Code Total Bytes, which also includes operating "
"system code on disk. System Code Resident Bytes (and System "
"Code Total Bytes) does not include code that must remain in "
"physical memory and cannot be written to disk. This counter "
"displays the last observed value only; it is not an average. "
,
"73", "System Driver Total Bytes is the number of bytes of pageable "
"virtual memory currently being used by device drivers. "
"(Pageable memory can be written to disk when it is not being "
"used). It includes physical memory (Memory: System Driver "
"Resident Bytes) and code and data paged to disk. It is a "
"component of Memory: System Code Total Bytes. This counter "
"displays the last observed value only; it is not an average. ",
"75", "System Driver Resident Bytes is the number of bytes of "
"pageable physical memory being used by device drivers. It is "
"the working set (physical memory area) of the drivers. This "
"value is a component of Memory: System Driver Total Bytes, "
"which also includes driver memory that has been written to "
"disk. Neither System Driver Resident Bytes nor System Driver "
"Total Bytes includes memory that cannot be written to disk.",
"77", "System Cache Resident Bytes is the number of bytes from "
"the file system cache that are resident in physical memory. "
"This value includes only current physical pages and does not "
"include any virtual memory pages not currently resident. As such "
"this value may be smaller than the actual amount of virtual "
"memory in use by the file system cache. "
"This value is a component of Memory: System Code Resident "
"Bytes. This counter displays the last "
"observed value only; it is not an average. ",
"79", "Announcements Domain/sec is the rate at which a Domain has "
"announced itself to the network.",
"81", "Election Packets/sec is the rate of Browser election packets "
"that have been received by this workstation.",
"83", "Mailslot Writes/sec is the rate of mailslot messages that "
"have been successfully received.",
"85", "Server List Requests/sec is the rate of requests to retrieve "
"a list of browser servers that have been processed by this "
"workstation.",
"87", "The Cache performance object consists of counters that "
"monitor the file system cache, an area of physical memory "
"that stores recently used data as long as possible to permit "
"access to the data without having to read from the disk. "
"Because applications typically use the cache, the cache is "
"monitored as an indicator of application I/O operations. When "
"memory is plentiful, the cache can grow, but when memory is "
"scarce, the cache can become too small to be effective.",
"89", "Data Maps/sec is the frequency that a file system such as "
"NTFS, maps a page of a file into the file system cache to "
"read the page.",
"91", "Sync Data Maps/sec counts the frequency that a file system, "
"such as NTFS, maps a page of a file into the file system "
"cache to read the page, and wishes to wait for the page to be "
"retrieved if it is not in main memory.",
"93", "Async Data Maps/sec is the frequency that an application "
"using a file system, such as NTFS, to map a page of a file "
"into the file system cache to read the page, and does not "
"wait for the page to be retrieved if it is not in main "
"memory.",
"95", "Data Map Hits is the percentage of data maps in the file "
"system cache that could be resolved without having to "
"retrieve a page from the disk, because the page was already "
"in physical memory.",
"97", "Data Map Pins/sec is the frequency of data maps in the file "
"system cache that resulted in pinning a page in main memory, "
"an action usually preparatory to writing to the file on disk. "
" While pinned, a page's physical address in main memory and "
"virtual address in the file system cache will not be altered.",
"99", "Pin Reads/sec is the frequency of reading data into the file "
"system cache preparatory to writing the data back to disk. "
"Pages read in this fashion are pinned in memory at the "
"completion of the read. While pinned, a page's physical "
"address in the file system cache will not be altered.",
"101", "Sync Pin Reads/sec is the frequency of reading data into the "
"file system cache preparatory to writing the data back to "
"disk. Pages read in this fashion are pinned in memory at the "
"completion of the read. The file system will not regain "
"control until the page is pinned in the file system cache, in "
"particular if the disk must be accessed to retrieve the page. "
"While pinned, a page's physical address in the file system "
"cache will not be altered.",
"103", "Async Pin Reads/sec is the frequency of reading data into the "
"file system cache preparatory to writing the data back to "
"disk. Pages read in this fashion are pinned in memory at "
"the completion of the read. The file system will regain "
"control immediately even if the disk must be accessed to "
"retrieve the page. While pinned, a page's physical address "
"will not be altered.",
"105", "Pin Read Hits is the percentage of pin read requests that hit "
"the file system cache, i.e., did not require a disk read in "
"order to provide access to the page in the file system cache. "
"While pinned, a page's physical address in the file system "
"cache will not be altered. The LAN Redirector uses this "
"method for retrieving data from the cache, as does the LAN "
"Server for small transfers. This is usually the method used "
"by the disk file systems as well.",
"107", "Copy Reads/sec is the frequency of reads from pages of the "
"file system cache that involve a memory copy of the data from "
"the cache to the application's buffer. The LAN Redirector "
"uses this method for retrieving information from the file "
"system cache, as does the LAN Server for small transfers. "
"This is a method used by the disk file systems as well.",
"109", "Sync Copy Reads/sec is the frequency of reads from pages of "
"the file system cache that involve a memory copy of the data "
"from the cache to the application's buffer. The file system "
"will not regain control until the copy operation is complete, "
"even if the disk must be accessed to retrieve the page.",
"111", "Async Copy Reads/sec is the frequency of reads from pages of "
"the file system cache that involve a memory copy of the data "
"from the cache to the application's buffer. The application "
"will regain control immediately even if the disk must be "
"accessed to retrieve the page.",
"113", "Copy Read Hits is the percentage of cache copy read requests "
"that hit the cache, that is, they did not require a disk read "
"in order to provide access to the page in the cache. A copy "
"read is a file read operation that is satisfied by a memory "
"copy from a page in the cache to the application's buffer. "
"The LAN Redirector uses this method for retrieving "
"information from the cache, as does the LAN Server for small "
"transfers. This is a method used by the disk file systems as "
"well.",
"115", "MDL Reads/sec is the frequency of reads from the file system "
"cache that use a Memory Descriptor List (MDL) to access the "
"data. The MDL contains the physical address of each page "
"involved in the transfer, and thus can employ a hardware "
"Direct Memory Access (DMA) device to effect the copy. The "
"LAN Server uses this method for large transfers out of the "
"server.",
"117", "Sync MDL Reads/sec is the frequency of reads from the file "
"system cache that use a Memory Descriptor List (MDL) to "
"access the pages. The MDL contains the physical address of "
"each page in the transfer, thus permitting Direct Memory "
"Access (DMA) of the pages. If the accessed page(s) are not "
"in main memory, the caller will wait for the pages to fault "
"in from the disk.",
"119", "Async MDL Reads/sec is the frequency of reads from the file "
"system cache that use a Memory Descriptor List (MDL) to "
"access the pages. The MDL contains the physical address of "
"each page in the transfer, thus permitting Direct Memory "
"Access (DMA) of the pages. If the accessed page(s) are not "
"in main memory, the calling application program will not wait "
"for the pages to fault in from disk.",
"121", "MDL Read Hits is the percentage of Memory Descriptor List "
"(MDL) Read requests to the file system cache that hit the "
"cache, i.e., did not require disk accesses in order to "
"provide memory access to the page(s) in the cache.",
"123", "Read Aheads/sec is the frequency of reads from the file "
"system cache in which the Cache detects sequential access to "
"a file. The read aheads permit the data to be transferred in "
"larger blocks than those being requested by the application, "
"reducing the overhead per access.",
"125", "Fast Reads/sec is the frequency of reads from the file system "
"cache that bypass the installed file system and retrieve the "
"data directly from the cache. Normally, file I/O requests "
"invoke the appropriate file system to retrieve data from a "
"file, but this path permits direct retrieval of data from the "
"cache without file system involvement if the data is in the "
"cache. Even if the data is not in the cache, one invocation "
"of the file system is avoided.",
"127", "Sync Fast Reads/sec is the frequency of reads from the file "
"system cache that bypass the installed file system and "
"retrieve the data directly from the cache. Normally, file "
"I/O requests invoke the appropriate file system to retrieve "
"data from a file, but this path permits direct retrieval of "
"data from the cache without file system involvement if the "
"data is in the cache. Even if the data is not in the cache, "
"one invocation of the file system is avoided. If the data is "
"not in the cache, the request (application program call) will "
"wait until the data has been retrieved from disk.",
"129", "Async Fast Reads/sec is the frequency of reads from the file "
"system cache that bypass the installed file system and "
"retrieve the data directly from the cache. Normally, file "
"I/O requests will invoke the appropriate file system to "
"retrieve data from a file, but this path permits data to be "
"retrieved from the cache directly (without file system "
"involvement) if the data is in the cache. Even if the data "
"is not in the cache, one invocation of the file system is "
"avoided. If the data is not in the cache, the request "
"(application program call) will not wait until the data has "
"been retrieved from disk, but will get control immediately.",
"131", "Fast Read Resource Misses/sec is the frequency of cache "
"misses necessitated by the lack of available resources to "
"satisfy the request.",
"133", "Fast Read Not Possibles/sec is the frequency of attempts by "
"an Application Program Interface (API) function call to "
"bypass the file system to get to data in the file system "
"cache that could not be honored without invoking the file "
"system.",
"135", "Lazy Write Flushes/sec is the rate at which the Lazy Writer "
"thread has written to disk. Lazy Writing is the process of "
"updating the disk after the page has been changed in memory, "
"so that the application that changed the file does not have "
"to wait for the disk write to be complete before proceeding. "
"More than one page can be transferred by each write "
"operation.",
"137", "Lazy Write Pages/sec is the rate at which the Lazy Writer "
"thread has written to disk. Lazy Writing is the process of "
"updating the disk after the page has been changed in memory, "
"so that the application that changed the file does not have "
"to wait for the disk write to be complete before proceeding. "
"More than one page can be transferred on a single disk write "
"operation.",
"139", "Data Flushes/sec is the rate at which the file system cache "
"has flushed its contents to disk as the result of a request "
"to flush or to satisfy a write-through file write request. "
"More than one page can be transferred on each flush "
"operation.",
"141", "Data Flush Pages/sec is the number of pages the file system "
"cache has flushed to disk as a result of a request to flush "
"or to satisfy a write-through file write request. More than "
"one page can be transferred on each flush operation.",
"143", "% User Time is the percentage of non-idle processor time "
"spent in user mode. (User mode is a restricted processing "
"mode designed for applications, environment subsystems, and "
"integral subsystems. The alternative, privileged mode, is "
"designed for operating system components and allows direct "
"access to hardware and all memory. The operating system "
"switches application threads to privileged mode to access "
"operating system services). This counter displays the average "
"busy time as a percentage of the sample time. ",
"145", "% Privileged Time is the percentage of non-idle processor time "
"spent in privileged mode. (Privileged mode is a processing "
"mode designed for operating system components and "
"hardware-manipulating drivers. It allows direct access to "
"hardware and all memory. The alternative, user mode, is a "
"restricted processing mode designed for applications, "
"environment subsystems, and integral subsystems. The "
"operating system switches application threads to privileged "
"mode to access operating system services). % Privileged Time "
"includes time servicing interrupts and DPCs. A high rate of "
"privileged time might be attributable to a large number of "
"interrupts generated by a failing device. This counter "
"displays the average busy time as a percentage of the sample "
"time. ",
"147", "Context Switches/sec is the combined rate at which all "
"processors on the computer are switched from one thread to "
"another. Context switches occur when a running thread "
"voluntarily relinquishes the processor, is preempted by a "
"higher priority ready thread, or switches between user-mode "
"and privileged (kernel) mode to use an Executive or subsystem "
"service. It is the sum of Thread: Context Switches/sec for "
"all threads running on all processors in the computer and is "
"measured in numbers of switches. There are context switch "
"counters on the System and Thread objects. This counter "
"displays the difference between the values observed in the "
"last two samples, divided by the duration of the sample "
"interval. ",
"149", "Interrupts/sec is the average number of hardware interrupts "
"the processor is receiving and servicing in each second. It "
"does not include DPCs, which are counted separately. This "
"value is an indirect indicator of the activity of devices "
"that generate interrupts, such as the system clock, the "
"mouse, disk drivers, data communication lines, network "
"interface cards and other peripheral devices. These devices "
"normally interrupt the processor when they have completed a "
"task or require attention. Normal thread execution is "
"suspended during interrupts. Most system clocks interrupt the "
"processor every 10 milliseconds, creating a background of "
"interrupt activity. This counter displays the difference "
"between the values observed in the last two samples, divided "
"by the duration of the sample interval. ",
"151", "Systems Calls/sec is the combined rate of calls to Windows NT "
"system service routines by all processes running on the "
"computer. These routines perform all of the basic scheduling "
"and synchronization of activities on the computer, and "
"provide access to non-graphic devices, memory management, and "
"name space management. This counter displays the difference "
"between the values observed in the last two samples, divided "
"by the duration of the sample interval. ",
"153", "Level 1 TLB Fills/sec is the frequency of faults that occur "
"when reference is made to memory whose Page Table Entry (PTE) "
"is not in the Translation Lookaside Buffer (TLB). On some "
"computers this fault is handled by software loading the PTE "
"into the TLB, and this counter is incremented.",
"155", "Level 2 TLB Fills/sec is the frequency of faults that occur "
"when reference is made to memory whose Page Table Entry (PTE) "
"is not in the Translation Lookaside Buffer (TLB), nor is the "
"page containing the PTE. On some computers this fault is "
"handled by software loading the PTE into the TLB, and this "
"counter is incremented.",
"157", "% User Time is the percentage of elapsed time that this "
"process' threads have spent executing code in user mode. "
"Applications, environment subsystems and integral subsystems "
"execute in user mode. Code executing in user mode cannot "
"damage the integrity of the Windows NT Executive, Kernel, and "
"device drivers. Unlike some early operating systems, Windows "
"NT uses process boundaries for subsystem protection in "
"addition to the traditional protection of user and privileged "
"modes. These subsystem processes provide additional "
"protection. Therefore, some work done by Windows NT on "
"behalf of your application might appear in other subsystem "
"processes in addition to the privileged time in your process.",
"159", "% Privileged Time is the percentage of elapsed time that the "
"threads of the process have spent executing code in "
"privileged mode. When a Windows NT system service is called, "
"the service will often run in Privileged Mode to gain access "
"to system-private data. Such data is protected from access "
"by threads executing in user Mode. Calls to the system can "
"be explicit or implicit, such as page faults or interrupts. "
"Unlike some early operating systems, Windows NT uses process "
"boundaries for subsystem protection in addition to the "
"traditional protection of user and privileged modes. These "
"subsystem processes provide additional protection. "
"Therefore, some work done by Windows NT on behalf of your "
"application might appear in other subsystem processes in "
"addition to the privileged time in your process.",
"161", "Enumerations Server/sec is the rate of Server browse requests "
"that have been processed by this workstation.",
"163", "Enumerations Domain/sec is the rate of Domain browse requests "
"that have been processed by this workstation.",
"165", "Enumerations Other/sec is the rate of browse requests "
"processed by this workstation that were not domain or server "
"browse requests.",
"167", "Missed Server Announcements is the number of server "
"announcements that have been missed due to configuration or "
"allocation limits.",
"169", "Missed Mailslot Datagrams is the number of Mailslot Datagrams "
"that have been discarded due to configuration or allocation "
"limits.",
"171", "Missed Server List Requests is the number of requests to "
"retrieve a list of browser servers that were received by this "
"workstation, but could not be processed.",
"173", "Virtual Bytes Peak is the maximum number of bytes of virtual "
"address space the process has used at any one time. Use of "
"virtual address space does not necessarily imply "
"corresponding use of either disk or main memory pages. "
"Virtual space is however finite, and by using too much, the "
"process might limit its ability to load libraries.",
"175", "Virtual Bytes is the current size in bytes of the virtual "
"address space the process is using. Use of virtual address "
"space does not necessarily imply corresponding use of either "
"disk or main memory pages. Virtual space is finite, and by "
"using too much, the process can limit its ability to load "
"libraries.",
"177", "Page Faults/sec is the rate Page Faults occur in the threads "
"executing in this process. A page fault occurs when a thread "
"refers to a virtual memory page that is not in its working "
"set in main memory. This will not cause the page to be "
"fetched from disk if it is on the standby list and hence "
"already in main memory, or if it is in use by another process "
"with whom the page is shared.",
"179", "Working Set Peak is the maximum number of bytes in the "
"Working Set of this process at any point in time. The "
"Working Set is the set of memory pages touched recently by "
"the threads in the process. If free memory in the computer "
"is above a threshold, pages are left in the Working Set of a "
"process even if they are not in use. When free memory falls "
"below a threshold, pages are trimmed from Working Sets. If "
"they are needed they will then be soft-faulted back into the "
"Working Set before they leave main memory.",
"181", "Working Set is the current number of bytes in the Working Set "
"of this process. The Working Set is the set of memory pages "
"touched recently by the threads in the process. If free "
"memory in the computer is above a threshold, pages are left "
"in the Working Set of a process even if they are not in use. "
"When free memory falls below a threshold, pages are trimmed "
"from Working Sets. If they are needed they will then be "
"soft-faulted back into the Working Set before they leave main "
"memory.",
"183", "Page File Bytes Peak is the maximum number of bytes this "
"process has used in the paging file(s). Paging files are "
"used to store pages of memory used by the process that are "
"not contained in other files. Paging files are shared by all "
"processes, and lack of space in paging files can prevent "
"other processes from allocating memory.",
"185", "Page File Bytes is the current number of bytes this process "
"has used in the paging file(s). Paging files are used to "
"store pages of memory used by the process that are not "
"contained in other files. Paging files are shared by all "
"processes, and lack of space in paging files can prevent "
"other processes from allocating memory.",
"187", "Private Bytes is the current number of bytes this process has "
"allocated that cannot be shared with other processes.",
"189", "% Processor Time is the percentage of elapsed time that all of "
"the threads of this process used the processor to execute "
"instructions. An instruction is the basic unit of execution "
"in a computer, a thread is the object that executes "
"instructions, and a process is the object created when a "
"program is run. Code executed to handle some hardware "
"interrupts and trap conditions are included in this count. "
"On Multi-processor machines the maximum value of the counter "
"is 100 % times the number of processors.",
"191", "% Processor Time is the percentage of elapsed time that this "
"thread used the processor to execute instructions. An "
"instruction is the basic unit of execution in a processor, "
"and a thread is the object that executes instructions. Code "
"executed to handle some hardware interrupts and trap "
"conditions are included in this count.",
"193", "% User Time is the percentage of elapsed time that this thread "
"has spent executing code in user mode. Applications, "
"environment subsystems, and integral subsystems execute in "
"user mode. Code executing in user mode cannot damage the "
"integrity of the Windows NT Executive, Kernel, and device "
"drivers. Unlike some early operating systems, Windows NT "
"uses process boundaries for subsystem protection in addition "
"to the traditional protection of user and privileged modes. "
"These subsystem processes provide additional protection. "
"Therefore, some work done by Windows NT on behalf of your "
"application might appear in other subsystem processes in "
"addition to the privileged time in your process.",
"195", "Privileged Time is the percentage of elapsed time that this "
"thread has spent executing code in privileged mode. When a "
"Windows NT system service is called, the service will often "
"run in privileged mode in order to gain access to "
"system-private data. Such data is protected from access by "
"threads executing in user mode. Calls to the system can be "
"explicit or implicit such as page faults and interrupts. "
"Unlike some early operating systems, Windows NT uses process "
"boundaries for subsystem protection in addition to the "
"traditional protection of user and privileged modes. These "
"subsystem processes provide additional protection. "
"Therefore, some work done by Windows NT on behalf of your "
"application might appear in other subsystem processes in "
"addition to the privileged time in your process.",
"197", "Context Switches/sec is the rate of switches from one thread "
"to another. Thread switches can occur either inside of a "
"single process or across processes. A thread switch can be "
"caused either by one thread asking another for information, "
"or by a thread being preempted by another, higher priority "
"thread becoming ready to run. Unlike some early operating "
"systems, Windows NT uses process boundaries for subsystem "
"protection in addition to the traditional protection of user "
"and privileged modes. These subsystem processes provide "
"additional protection. Therefore, some work done by Windows "
"NT on behalf of an application appear in other subsystem "
"processes in addition to the privileged time in the "
"application. Switching to the subsystem process causes one "
"Context Switch in the application thread. Switching back "
"causes another Context Switch in the subsystem thread.",
"199", "Current Disk Queue Length is the number of requests "
"outstanding on the disk at the time the performance data is "
"collected. It includes requests in service at the time of "
"the snapshot. This is an instantaneous length, not an "
"average over the time interval. Multi-spindle disk devices "
"can have multiple requests active at one time, but other "
"concurrent requests are awaiting service. This counter might "
"reflect a transitory high or low queue length, but if there "
"is a sustained load on the disk drive, it is likely that this "
"will be consistently high. Requests are experiencing delays "
"proportional to the length of this queue minus the number of "
"spindles on the disks. This difference should average less "
"than 2 for good performance.",
"201", "% Disk Time is the percentage of elapsed time that the selected "
"disk drive is busy servicing read or write requests.",
"203", "% Disk Read Time is the percentage of elapsed time that the "
"selected disk drive is busy servicing read requests.",
"205", "% Disk Write Time is the percentage of elapsed time that the "
"selected disk drive is busy servicing write requests.",
"207", "Avg. Disk sec/Transfer is the time in seconds of the average "
"disk transfer.",
"209", "Avg. Disk sec/Read is the average time in seconds of a read "
"of data from the disk.",
"211", "Avg. Disk sec/Write is the average time in seconds of a write "
"of data to the disk.",
"213", "Disk Transfers/sec is the rate of read and write operations "
"on the disk.",
"215", "Disk Reads/sec is the rate of read operations on the disk.",
"217", "Disk Writes/sec is the rate of write operations on the disk.",
"219", "Disk Bytes/sec is the rate bytes are transferred to or from "
"the disk during write or read operations.",
"221", "Disk Read Bytes/sec is the rate bytes are transferred from "
"the disk during read operations.",
"223", "Disk Write Bytes is rate bytes are transferred to the disk "
"during write operations.",
"225", "Avg. Disk Bytes/Transfer is the average number of bytes "
"transferred to or from the disk during write or read "
"operations.",
"227", "Avg. Disk Bytes/Read is the average number of bytes "
"transferred from the disk during read operations.",
"229", "Avg. Disk Bytes/Write is the average number of bytes "
"transferred to the disk during write operations.",
"231", "The Process performance object consists of counters that "
"monitor running application program and system processes. "
"All the threads in a process share the same address space and "
"have access to the same data.",
"233", "The Thread performance object consists of counters that "
"measure aspects of thread behavior. A thread is the basic "
"object that executes instructions on a processor. All running "
"processes have at least one thread.",
"235", "The Physical Disk performance object consists of counters "
"that monitor hard or fixed disk drive on a computer. Disks "
"are used to store file, program, and paging data and are read "
"to retrieve these items, and written to record changes to "
"them. The values of physical disk counters are sums of the "
"values of the logical disks (or partitions) into which they "
"are divided.",
"237", "The Logical Disk performance object consists of counters that "
"monitor logical partitions of a hard or fixed disk drives. "
"Performance Monitor identifies logical disks by their a drive "
"letter, such as C.",
"239", "The Processor performance object consists of counters that "
"measure aspects of processor activity The processor is the "
"part of the computer that performs arithmetic and logical "
"computations, initiates operations on peripherals, and runs "
"the threads of processes. A computer can have multiple "
"processors. The processor object represents each processor as "
"an instance of the object.",
"241", "% Total Processor Time is the average percentage of time that "
"all processors on the computer are executing non-idle "
"threads. This counter was designed as the primary indicator "
"of processor activity on multiprocessor computers. It is "
"equal to the sum of Process: % Processor Time for all "
"processors, divided by the number of processors. It is "
"calculated by summing the time that all processors spend "
"executing the thread of the Idle process in each sample "
"interval, subtracting that value from 100%, and dividing the "
"difference by the number of processors on the computer. (Each "
"processor has an Idle thread which consumes cycles when no "
"other threads are ready to run). For example, on a "
"multiprocessor computer, a value of 50% means that all "
"processors are busy for half of the sample interval, or that "
"half of the processors are busy for all of the sample "
"interval. This counter displays the average percentage of "
"busy time observed during the sample interval. It is "
"calculated by monitoring the time the service was inactive, "
"and then subtracting that value from 100%. ",
"243", "% Total User Time is the average percentage of non-idle time "
"all processors spent in user mode. It is the sum of "
"Processor: % User Time for all processors on the computer, "
"divided by the number of processors. System: % Total User "
"Time and System: % Total Privileged Time sum to % Total "
"Processor Time, but not always to 100%. (User mode is a "
"restricted processing mode designed for applications, "
"environment subsystems, and integral subsystems. The "
"alternative, privileged mode, is designed for operating "
"system components and allows direct access to hardware and "
"all memory. The operating system switches application threads "
"to privileged mode to access operating system services). This "
"counter displays the average busy time as a percentage of the "
"sample time. ",
"245", "% Total Privileged Time is the average percentage of non-idle "
"time all processors spent in privileged (kernel) mode. It is "
"the sum of Processor: % Privileged Time for all processors on "
"the computer, divided by the number of processors. System: % "
"Total User Time and System: % Total Privileged Time sum to % "
"Total Processor Time, but not always to 100%. (Privileged "
"mode is an processing mode designed for operating system "
"components which allows direct access to hardware and all "
"memory. The operating system switches application threads to "
"privileged mode to access operating system services. The "
"alternative, user mode, is a restricted processing mode "
"designed for applications and environment subsystems). This "
"counter displays the average busy time as a percentage of the "
"sample time. ",
"247", "Total Interrupts/sec is the combined rate of hardware "
"interrupts received and serviced by all processors on the "
"computer It is the sum of Processor: Interrupts/sec for all "
"processors, and divided by the number of processors, and is "
"measured in numbers of interrupts. It does not include DPCs, "
"which are counted separately. This value is an indirect "
"indicator of the activity of devices that generate "
"interrupts, such as the system timer, the mouse, disk "
"drivers, data communication lines, network interface cards "
"and other peripheral devices. These devices normally "
"interrupt the processor when they have completed a task or "
"require attention. Normal thread execution is suspended "
"during interrupts. Most system clocks interrupt the processor "
"every 10 milliseconds, creating a background of interrupt "
"activity. This counter displays the difference between the "
"values observed in the last two samples, divided by the "
"duration of the sample interval. ",
"249", "Processes is the number of processes in the computer at the "
"time of data collection. Notice that this is an "
"instantaneous count, not an average over the time interval. "
"Each process represents the running of a program.",
"251", "Threads is the number of threads in the computer at the time "
"of data collection. Notice that this is an instantaneous "
"count, not an average over the time interval. A thread is "
"the basic executable entity that can execute instructions in "
"a processor.",
"253", "Events is the number of events in the computer at the time of "
"data collection. Notice that this is an instantaneous count, "
"not an average over the time interval. An event is used when "
"two or more threads wish to synchronize execution.",
"255", "Semaphores is the number of semaphores in the computer at the "
"time of data collection. Notice that this is an "
"instantaneous count, not an average over the time interval. "
"Threads use semaphores to obtain exclusive access to data "
"structures that they share with other threads.",
"257", "Mutexes counts the number of mutexes in the computer at the "
"time of data collection. This is an instantaneous count, not "
"an average over the time interval. Mutexes are used by "
"threads to assure only one thread is executing some section "
"of code.",
"259", "Sections is the number of sections in the computer at the "
"time of data collection. Notice that this is an "
"instantaneous count, not an average over the time interval. "
"A section is a portion of virtual memory created by a process "
"for storing data. A process can share sections with other "
"processes.",
"261", "The Object performance object consists of counters that "
"monitor logical objects in the system, such as processes, "
"threads, mutexes, and semaphores. This information can be "
"used to detect the unnecessary consumption of computer "
"resources. Each object requires memory to store basic "
"information about the object.",
"263", "The Redirector performance object consists of counter that "
"monitor network connections originating at the local "
"computer.",
"265", "Bytes Received/sec is the rate of bytes coming in to the "
"Redirector from the network. It includes all application "
"data as well as network protocol information (such as packet "
"headers).",
"267", "Packets Received/sec is the rate at which the Redirector is "
"receiving packets (also called SMBs or Server Message "
"Blocks). Network transmissions are divided into packets. "
"The average number of bytes received in a packet can be "
"obtained by dividing Bytes Received/sec by this counter. "
"Some packets received might not contain incoming data, for "
"example an acknowledgment to a write made by the Redirector "
"would count as an incoming packet.",
"269", "Read Bytes Paging/sec is the rate at which the Redirector is "
"attempting to read bytes in response to page faults. Page "
"faults are caused by loading of modules (such as programs and "
"libraries), by a miss in the Cache (see Read Bytes "
"Cache/sec), or by files directly mapped into the address "
"space of applications (a high-performance feature of Windows "
"NT).",
"271", "Read Bytes Non-Paging/sec are those bytes read by the "
"Redirector in response to normal file requests by an "
"application when they are redirected to come from another "
"computer. In addition to file requests, this counter "
"includes other methods of reading across the network such as "
"Named Pipes and Transactions. This counter does not count "
"network protocol information, just application data.",
"273", "Read Bytes Cache/sec is the rate at which applications are "
"accessing the file system cache by using the Redirector. "
"Some of these data requests are satisfied by retrieving the "
"data from the cache. Requests that miss the Cache cause a "
"page fault (see Read Bytes Paging/sec).",
"275", "Read Bytes Network/sec is the rate at which applications are "
"reading data across the network. This occurs when data sought "
"in the file system cache is not found there and must be "
"retrieved from the network. Dividing this value by Bytes "
"Received/sec indicates the proportion of application data "
"traveling across the network. (see Bytes Received/sec).",
"277", "Bytes Transmitted/sec is the rate at which bytes are leaving "
"the Redirector to the network. It includes all application "
"data as well as network protocol information (such as packet "
"headers and the like).",
"279", "Packets Transmitted/sec is the rate at which the Redirector "
"is sending packets (also called SMBs or Server Message "
"Blocks). Network transmissions are divided into packets. "
"The average number of bytes transmitted in a packet can be "
"obtained by dividing Bytes Transmitted/sec by this counter.",
"281", "Write Bytes Paging/sec is the rate at which the Redirector is "
"attempting to write bytes changed in the pages being used by "
"applications. The program data changed by modules (such as "
"programs and libraries) that were loaded over the network are "
"'paged out' when no longer needed. Other output pages come "
"from the file system cache (see Write Bytes Cache/sec).",
"283", "Write Bytes Non-Paging/sec is the rate at which bytes are "
"written by the Redirector in response to normal file outputs "
"by an application when they are redirected to another "
"computer. In addition to file requests, this count includes "
"other methods of writing across the network, such as Named "
"Pipes and Transactions. This counter does not count network "
"protocol information, just application data.",
"285", "Write Bytes Cache/sec is the rate at which applications on "
"your computer are writing to the file system cache by using "
"the Redirector. The data might not leave your computer "
"immediately; it can be retained in the cache for further "
"modification before being written to the network. This saves "
"network traffic. Each write of a byte into the cache is "
"counted here.",
"287", "Write Bytes Network/sec is the rate at which applications are "
"writing data across the network. This occurs when the file "
"system cache is bypassed, such as for Named Pipes or "
"Transactions, or when the cache writes the bytes to disk to "
"make room for other data. Dividing this counter by Bytes "
"Transmitted/sec will indicate the proportion of application "
"data being to the network (see Transmitted Bytes/sec).",
"289", "File Read Operations/sec is the rate at which applications "
"are asking the Redirector for data. Each call to a file "
"system or similar Application Program Interface (API) call "
"counts as one operation.",
"291", "Read Operations Random/sec counts the rate at which, on a "
"file-by-file basis, reads are made that are not sequential. "
"If a read is made using a particular file handle, and then is "
"followed by another read that is not immediately the "
"contiguous next byte, this counter is incremented by one.",
"293", "Read Packets/sec is the rate at which read packets are being "
"placed on the network. Each time a single packet is sent "
"with a request to read data remotely, this counter is "
"incremented by one.",
"295", "Reads Large/sec is the rate at which reads over 2 times the "
"server's negotiated buffer size are made by applications. "
"Too many of these could place a strain on server resources. "
"This counter is incremented once for each read. It does not "
"count packets.",
"297", "Read Packets Small/sec is the rate at which reads less than "
"one-fourth of the server's negotiated buffer size are made by "
"applications. Too many of these could indicate a waste of "
"buffers on the server. This counter is incremented once for "
"each read. It does not count packets.",
"299", "File Write Operations/sec is the rate at which applications "
"are sending data to the Redirector. Each call to a file "
"system or similar Application Program Interface (API) call "
"counts as one operation.",
"301", "Write Operations Random/sec is the rate at which, on a "
"file-by-file basis, writes are made that are not sequential. "
"If a write is made using a particular file handle, and then "
"is followed by another write that is not immediately the next "
"contiguous byte, this counter is incremented by one.",
"303", "Write Packets/sec is the rate at which writes are being sent "
"to the network. Each time a single packet is sent with a "
"request to write remote data, this counter is incremented by "
"one.",
"305", "Writes Large/sec is the rate at which writes are made by "
"applications that are over 2 times the server's negotiated "
"buffer size. Too many of these could place a strain on "
"server resources. This counter is incremented once for each "
"write: it counts writes, not packets.",
"307", "Write Packets Small/sec is the rate at which writes are made "
"by applications that are less than one-fourth of the server's "
"negotiated buffer size. Too many of these could indicate a "
"waste of buffers on the server. This counter is incremented "
"once for each write: it counts writes, not packets.",
"309", "Reads Denied/sec is the rate at which the server is unable to "
"accommodate requests for Raw Reads. When a read is much "
"larger than the server's negotiated buffer size, the "
"Redirector requests a Raw Read which, if granted, would "
"permit the transfer of the data without lots of protocol "
"overhead on each packet. To accomplish this the server must "
"lock out other requests, so the request is denied if the "
"server is really busy.",
"311", "Writes Denied/sec is the rate at which the server is unable "
"to accommodate requests for Raw Writes. When a write is much "
"larger than the server's negotiated buffer size, the "
"Redirector requests a Raw Write which, if granted, would "
"permit the transfer of the data without lots of protocol "
"overhead on each packet. To accomplish this the server must "
"lock out other requests, so the request is denied if the "
"server is really busy.",
"313", "Network Errors/sec counts serious unexpected errors that "
"generally indicate the Redirector and one or more Servers are "
"having serious communication difficulties. For example an "
"SMB (Server Manager Block) protocol error will generate a "
"Network Error. These result in an entry in the system Event "
"Log, so look there for details.",
"315", "Server Sessions counts the total number of security objects "
"the Redirector has managed. For example, a logon to a server "
"followed by a network access to the same server will "
"establish one connection, but two sessions.",
"317", "Server Reconnects counts the number of times your Redirector "
"has had to reconnect to a server in order to complete a new "
"active request. You can be disconnected by the Server if you "
"remain inactive for too long. Locally even if all your "
"remote files are closed, the Redirector will keep your "
"connections intact for (nominally) ten minutes. Such "
"inactive connections are called Dormant Connections. "
"Reconnecting is expensive in time.",
"319", "Connects Core counts the number of connections you have to "
"servers running the original MS-Net SMB protocol, including "
"MS-Net itself and Xenix and VAX's.",
"321", "Connects LAN Manager 2.0 counts connections to LAN Manager "
"2.0 servers, including LMX servers.",
"323", "Connects LAN Manager 2.1 counts connections to LAN Manager "
"2.1 servers, including LMX servers.",
"325", "Connects Windows NT counts the connections to Windows NT "
"computers. Good choice!",
"327", "Server Disconnects counts the number of times a Server has "
"disconnected your Redirector. See also Server Reconnects.",
"329", "Server Sessions Hung counts the number of active sessions "
"that are timed out and unable to proceed due to a lack of "
"response from the remote server.",
"331", "The Server performance object consists of counters that "
"measure communication between the local computer and the "
"network.",
"333", "The number of bytes the server has received from the network. "
" Indicates how busy the server is.",
"335", "The number of bytes the server has sent on the network. "
"Indicates how busy the server is.",
"337", "Thread Wait Reason is only applicable when the thread is in "
"the Wait state (see Thread State). It is 0 or 7 when the "
"thread is waiting for the Executive, 1 or 8 for a Free Page, "
"2 or 9 for a Page In, 3 or 10 for a Pool Allocation, 4 or 11 "
"for an Execution Delay, 5 or 12 for a Suspended condition, 6 "
"or 13 for a User Request, 14 for an Event Pair High, 15 for "
"an Event Pair Low, 16 for an LPC Receive, 17 for an LPC "
"Reply, 18 for Virtual Memory, 19 for a Page Out; 20 and "
"higher are not assigned at the time of this writing. Event "
"Pairs are used to communicate with protected subsystems (see "
"Context Switches).",
"339", "% DPC Time is the percentage of time that the processor spent "
"receiving and servicing deferred procedure calls (DPCs) "
"during the sample interval. (DPCs are interrupts that run at a "
"lower priority than standard interrupts). % DPC Time is a "
"component of % Privileged Time because DPCs are executed in "
"privileged mode. They are counted separately and are not a "
"component of the interrupt counters. This counter displays "
"the average busy time as a percentage of the sample time. ",
"341", "The number of sessions that have been closed due to their "
"idle time exceeding the AutoDisconnect parameter for the "
"server. Shows whether the AutoDisconnect setting is helping "
"to conserve resources.",
"343", "The number of sessions that have been closed due to "
"unexpected error conditions or sessions that have "
"reached the autodisconnect timeout and have been disconnected "
"normally.",
"345", "The number of sessions that have terminated normally. Useful "
"in interpreting the Sessions Times Out and Sessions Errored "
"Out statistics--allows percentage calculations.",
"347", "The number of sessions that have been forced to logoff. Can "
"indicate how many sessions were forced to logoff due to logon "
"time constraints.",
"349", "The number of failed logon attempts to the server. Can "
"indicate whether password guessing programs are being used to "
"crack the security on the server.",
"351", "The number of times opens on behalf of clients have failed "
"with STATUS_ACCESS_DENIED. Can indicate whether somebody is "
"randomly attempting to access files in hopes of getting at "
"something that was not properly protected.",
"353", "The number of times accesses to files opened successfully "
"were denied. Can indicate attempts to access files without "
"proper access authorization.",
"355", "The number of times an internal Server Error was detected. "
"Unexpected errors usually indicate a problem with the Server.",
"357", "The number of times the server has rejected blocking SMBs due "
"to insufficient count of free work items. Indicates whether "
"the MaxWorkItem or MinFreeWorkItems server parameters might "
"need to be adjusted.",
"359", "The number of times STATUS_DATA_NOT_ACCEPTED was returned at "
"receive indication time. This occurs when no work item is "
"available or can be allocated to service the incoming "
"request. Indicates whether the InitWorkItems or MaxWorkItems "
"parameters might need to be adjusted.",
"361", "The number of successful open attempts performed by the "
"server of behalf of clients. Useful in determining the "
"amount of file I/O, determining overhead for path-based "
"operations, and for determining the effectiveness of open "
"locks.",
"363", "The number of files currently opened in the server. "
"Indicates current server activity.",
"365", "The number of sessions currently active in the server. "
"Indicates current server activity.",
"367", "The number of searches for files currently active in the "
"server. Indicates current server activity.",
"369", "The number of bytes of non-pageable computer memory the "
"server is using. This value is useful for determining the "
"values of the MaxNonpagedMemoryUsage value entry in the "
"Windows<77>NT Registry.",
"371", "The number of times allocations from nonpaged pool have "
"failed. Indicates that the computer's physical memory is too "
"small.",
"373", "The maximum number of bytes of nonpaged pool the server has "
"had in use at any one point. Indicates how much physical "
"memory the computer should have.",
"375", "The number of bytes of pageable computer memory the server is "
"currently using. Can help in determining good values for the "
"MaxPagedMemoryUsage parameter.",
"377", "The number of times allocations from paged pool have failed. "
"Indicates that the computer's physical memory or paging file "
"are too small.",
"379", "The maximum number of bytes of paged pool the server has had "
"allocated. Indicates the proper sizes of the Page File(s) "
"and physical memory.",
"381", "Server Announce Allocations Failed/sec is the rate of server "
"(or domain) announcements that have failed due to lack of "
"memory.",
"383", "Mailslot Allocations Failed is the number of times the "
"datagram receiver has failed to allocate a buffer to hold a "
"user mailslot write.",
"385", "Mailslot Receives Failed indicates the number of mailslot "
"messages that couldn't be received due to transport failures.",
"387", "Mailslot Writes Failed is the total number of mailslot "
"messages that have been successfully received, but that were "
"unable to be written to the mailslot.",
"389", "Bytes Total/sec is the rate the Redirector is processing data "
"bytes. This includes all application and file data in "
"addition to protocol information such as packet headers.",
"391", "File Data Operations/sec is the rate the Redirector is "
"processing data operations. One operation includes "
"(hopefully) many bytes. We say hopefully here because each "
"operation has overhead. You can determine the efficiency of "
"this path by dividing the Bytes/sec by this counter to "
"determine the average number of bytes transferred/operation.",
"393", "Current Commands counts the number of requests to the "
"Redirector that are currently queued for service. If this "
"number is much larger than the number of network adapter "
"cards installed in the computer, then the network(s) and/or "
"the server(s) being accessed are seriously bottlenecked.",
"395", "The number of bytes the server has sent to and received from "
"the network. This value provides an overall indication of "
"how busy the server is.",
"397", "% Interrupt Time is the percentage of time the processor "
"spent receiving and servicing hardware interrupts during the "
"sample interval. This value is an indirect indicator of the "
"activity of devices that generate interrupts, such as the "
"system clock, the mouse, disk drivers, data communication "
"lines, network interface cards and other peripheral devices. "
"These devices normally interrupt the processor when they have "
"completed a task or require attention. Normal thread "
"execution is suspended during interrupts. Most system clocks "
"interrupt the processor every 10 milliseconds, creating a "
"background of interrupt activity. This counter displays the "
"average busy time as a percentage of the sample time. ",
"399", "The NWLink NetBIOS performance object consists of counters "
"that monitor IPX transport rates and connections. ",
"401", "Packets/sec is the rate the Redirector is processing data "
"packets. One packet includes (hopefully) many bytes. We say "
"hopefully here because each packet has protocol overhead. "
"You can determine the efficiency of this path by dividing the "
"Bytes/sec by this counter to determine the average number of "
"bytes transferred/packet. You can also divide this counter "
"by Operations/sec to determine the average number of packets "
"per operation, another measure of efficiency.",
"405", "Context Blocks Queued per second is the rate at which work "
"context blocks had to be placed on the server's FSP queue to "
"await server action.",
"407", "File Data Operations/ sec is the combined rate of read and "
"write operations on all logical disks on the computer. This "
"is the inverse of System: File Control Operations/sec. This "
"counter displays the difference between the values observed "
"in the last two samples, divided by the duration of the "
"sample interval. ",
"409", "% Free Space is the ratio of the free space available "
"on the logical disk unit to the total usable space provided "
"by the selected logical disk drive.",
"411", "Free Megabytes displays the unallocated space on the disk "
"drive in megabytes. One megabyte = 1,048,576 bytes.",
"413", "Connections Open is the number of connections currently open "
"for this protocol. This counter shows the current count only "
"and does not accumulate over time.",
"415", "Connections No Retries is the total count of connections that "
"were successfully made on the first try. This number is an "
"accumulator and shows a running total.",
"417", "Connections With Retries is the total count of connections "
"that were made after retrying the attempt. A retry occurs "
"when the first connection attempt failed. This number is an "
"accumulator and shows a running total.",
"419", "Disconnects Local is the number of session disconnections "
"that were initiated by the local computer. This number is an "
"accumulator and shows a running total.",
"421", "Disconnects Remote is the number of session disconnections "
"that were initiated by the remote computer. This number is "
"an accumulator and shows a running total.",
"423", "Failures Link is the number of connections that were dropped "
"due to a link failure. This number is an accumulator and "
"shows a running total.",
"425", "Failures Adapter is the number of connections that were "
"dropped due to an adapter failure. This number is an "
"accumulator and shows a running total.",
"427", "Connection Session Timeouts is the number of connections that "
"were dropped due to a session timeout. This number is an "
"accumulator and shows a running total.",
"429", "Connections Canceled is the number of connections that were "
"canceled. This number is an accumulator and shows a running "
"total.",
"431", "Failures Resource Remote is the number of connections that "
"failed because of resource problems or shortages on the "
"remote computer. This number is an accumulator and shows a "
"running total.",
"433", "Failures Resource Local is the number of connections that "
"failed because of resource problems or shortages on the local "
"computer. This number is an accumulator and shows a running "
"total.",
"435", "Failures Not Found is the number of connection attempts that "
"failed because the remote computer could not be found. This "
"number is an accumulator and shows a running total.",
"437", "Failures No Listen is the number of connections that were "
"rejected because the remote computer was not listening for "
"connection requests.",
"439", "Datagrams/sec is the rate at which datagrams are processed by "
"the computer. This counter displays the sum of datagrams "
"sent and datagrams received. A datagram is a connectionless "
"packet whose delivery to a remote is not guaranteed.",
"441", "Datagram Bytes/sec is the rate at which datagram bytes are "
"processed by the computer. This counter is the sum of "
"datagram bytes that are sent as well as received. A datagram "
"is a connectionless packet whose delivery to a remote is not "
"guaranteed.",
"443", "Datagrams Sent/sec is the rate at which datagrams are sent "
"from the computer. A datagram is a connectionless packet "
"whose delivery to a remote computer is not guaranteed.",
"445", "Datagram Bytes Sent/sec is the rate at which datagram bytes "
"are sent from the computer. A datagram is a connectionless "
"packet whose delivery to a remote computer is not guaranteed.",
"447", "Datagrams Received/sec is the rate at which datagrams are "
"received by the computer. A datagram is a connectionless "
"packet whose delivery to a remote computer is not guaranteed.",
"449", "Datagram Bytes Received/sec is the rate at which datagram "
"bytes are received by the computer. A datagram is a "
"connectionless packet whose delivery to a remote computer is "
"not guaranteed.",
"451", "Packets/sec is the rate at which packets are processed by the "
"computer. This count is the sum of Packets Sent and Packets "
"Received per second. This counter includes all packets "
"processed: control as well as data packets.",
"453", "Packets Sent/sec is the rate at which packets are sent by the "
"computer. This counter counts all packets sent by the "
"computer, i.e. control as well as data packets.",
"455", "Packets Received/sec is the rate at which packets are "
"received by the computer. This counter counts all packets "
"processed: control as well as data packets.",
"457", "Frames/sec is the rate at which data frames (or packets) are "
"processed by the computer. This counter is the sum of data "
"frames sent and data frames received. This counter only "
"counts those frames (packets) that carry data.",
"459", "Frame Bytes/sec is the rate at which data bytes are processed "
"by the computer. This counter is the sum of data frame bytes "
"sent and received. This counter only counts the byte in "
"frames (packets) that carry data.",
"461", "Frames Sent/sec is the rate at which data frames are sent by "
"the computer. This counter only counts the frames (packets) "
"that carry data.",
"463", "Frame Bytes Sent/sec is the rate at which data bytes are sent "
"by the computer. This counter only counts the bytes in "
"frames (packets) that carry data.",
"465", "Frames Received/sec is the rate at which data frames are "
"received by the computer. This counter only counts the "
"frames (packets) that carry data.",
"467", "Frame Bytes Received/sec is the rate at which data bytes are "
"received by the computer. This counter only counts the "
"frames (packets) that carry data.",
"469", "Frames Re-Sent/sec is the rate at which data frames (packets) "
"are re-sent by the computer. This counter only counts the "
"frames or packets that carry data.",
"471", "Frame Bytes Re-Sent/sec is the rate at which data bytes are "
"re-sent by the computer. This counter only counts the bytes "
"in frames that carry data.",
"473", "Frames Rejected/sec is the rate at which data frames are "
"rejected. This counter only counts the frames (packets) that "
"carry data.",
"475", "Frame Bytes Rejected/sec is the rate at which data bytes are "
"rejected. This counter only counts the bytes in data frames "
"(packets) that carry data.",
"477", "Expirations Response is the count of T1 timer expirations.",
"479", "Expirations Ack is the count of T2 timer expirations.",
"481", "Window Send Maximum is the maximum number of bytes of data "
"that will be sent before waiting for an acknowledgment from "
"the remote computer.",
"483", "Window Send Average is the running average number of data "
"bytes that were sent before waiting for an acknowledgment "
"from the remote computer.",
"485", "Piggyback Ack Queued/sec is the rate at which piggybacked "
"acknowledgments are queued. Piggyback acknowledgments are "
"acknowledgments to received packets that are to be included "
"in the next outgoing packet to the remote computer.",
"487", "Piggyback Ack Timeouts is the number of times that a "
"piggyback acknowledgment could not be sent because there was "
"no outgoing packet to the remote on which to piggyback. A "
"piggyback ack is an acknowledgment to a received packet that "
"is sent along in an outgoing data packet to the remote "
"computer. If no outgoing packet is sent within the timeout "
"period, then an ack packet is sent and this counter is "
"incremented.",
"489", "The NWLink IPX performance object consists of counters that "
"measure datagram transmission to and from computers using the "
"IPX protocol.",
"491", "The NWLink SPX performance object consist of counters that "
"measure data transmission and session connections for "
"computers using the SPX protocol.",
"493", "The NetBEUI performance object consists of counters that "
"measure data transmission for network activity which conforms "
"to the NetBIOS End User Interface standard.",
"495", "The NetBEUI Resource performance object consists of counters "
"that track the use of buffers by the NetBEUI protocol.",
"497", "Used Maximum is the maximum number of NetBEUI resources "
"(buffers) in use at any point in time. This value is useful "
"in sizing the maximum resources provided. The number in "
"parentheses following the resource name is used to identify "
"the resource in Event Log messages.",
"499", "Used Average is the current number of resources (buffers) in "
"use at this time. The number in parentheses following the "
"resource name is used to identify the resource in Event Log "
"messages.",
"501", "Times Exhausted is the number of times all the resources "
"(buffers) were in use. The number in parentheses following "
"the resource name is used to identify the resource in Event "
"Log messages.",
"503", "The NBT Connection performance object consists of counters "
"that measure the rates at which bytes are sent and received "
"over the NBT connection between the local computer and a "
"remote computer. The connection is identified by the name of "
"the remote computer.",
"505", "Bytes Received/sec is the rate at which bytes are received by "
"the local computer over an NBT connection to some remote "
"computer. All the bytes received by the local computer over "
"the particular NBT connection are counted.",
"507", "Bytes Sent/sec is the rate at which bytes are sent by the "
"local computer over an NBT connection to some remote "
"computer. All the bytes sent by the local computer over the "
"particular NBT connection are counted.",
"509", "Total Bytes/sec is the rate at which bytes are sent or "
"received by the local computer over an NBT connection to some "
"remote computer. All the bytes sent or received by the local "
"computer over the particular NBT connection are counted.",
"511", "The Network Interface performance object consists of counters "
"that measure the rates at which bytes and packets are sent "
"and received over a TCP/IP network connection. It includes "
"counters that monitor connection errors.",
"513", "Bytes Total/sec is the rate at which bytes are sent and "
"received on the interface, including framing characters.",
"515", "Packets/sec is the rate at which packets are sent and "
"received on the network interface.",
"517", "Packets Received/sec is the rate at which packets are "
"received on the network interface.",
"519", "Packets Sent/sec is the rate at which packets are sent on the "
"network interface.",
"521", "Current Bandwidth is an estimate of the interface's current "
"bandwidth in bits per second (BPS). For interfaces that do "
"not vary in bandwidth or for those where no accurate "
"estimation can be made, this value is the nominal bandwidth.",
"523", "Bytes Received/sec is the rate at which bytes are received on "
"the interface, including framing characters.",
"525", "Packets Received Unicast/sec is the rate at which (subnet) "
"unicast packets are delivered to a higher-layer protocol.",
"527", "Packets Received Non-Unicast/sec is the rate at which "
"non-unicast (i.e., subnet broadcast or subnet multicast) "
"packets are delivered to a higher-layer protocol.",
"529", "Packets Received Discarded is the number of inbound packets "
"that were chosen to be discarded even though no errors had "
"been detected to prevent their being deliverable to a "
"higher-layer protocol. One possible reason for discarding "
"such a packet could be to free up buffer space.",
"531", "Packets Received Errors is the number of inbound packets that "
"contained errors preventing them from being deliverable to a "
"higher-layer protocol.",
"533", "Packets Received Unknown is the number of packets received "
"via the interface that were discarded because of an unknown "
"or unsupported protocol.",
"535", "Bytes Sent/sec is the rate at which bytes are sent on the "
"interface, including framing characters.",
"537", "Packets Sent Unicast/sec is the rate at which packets are "
"requested to be transmitted to subnet-unicast addresses by "
"higher-level protocols. The rate includes the packets that "
"were discarded or not sent.",
"539", "Packets Sent Non-Unicast/sec is the rate at which packets are "
"requested to be transmitted to non-unicast (i.e., subnet "
"broadcast or subnet multicast) addresses by higher-level "
"protocols. The rate includes the packets that were discarded "
"or not sent.",
"541", "Packets Outbound Discarded is the number of outbound packets "
"that were chosen to be discarded even though no errors had "
"been detected to prevent their being transmitted. One "
"possible reason for discarding such a packet could be to free "
"up buffer space.",
"543", "Packets Outbound Errors is the number of outbound packets "
"that could not be transmitted because of errors.",
"545", "Output Queue Length is the length of the output packet queue "
"(in packets). If this is longer than 2, delays are being "
"experienced and the bottleneck should be found and eliminated "
"if possible. Since the requests are queued by NDIS in this "
"implementation, this will always be 0.",
"547", "The IP performance object consists of counters that measure "
"the rates at which IP datagrams are sent and received by "
"using IP protocols. It also includes counters that monitor "
"IP protocol errors.",
"549", "Datagrams/sec is the rate at which IP datagrams are received "
"from or sent to the interfaces, including those in error. "
"Any forwarded datagrams are not included in this rate.",
"551", "Datagrams Received/sec is the rate at which IP datagrams are "
"received from the interfaces, including those in error.",
"553", "Datagrams Received Header Errors is the number of input "
"datagrams discarded due to errors in their IP headers, "
"including bad checksums, version number mismatch, other "
"format errors, time-to-live exceeded, errors discovered in "
"processing their IP options, etc.",
"555", "Datagrams Received Address Errors is the number of input "
"datagrams discarded because the IPaddress in their IP "
"header's destination field was not a valid address to be "
"received at this entity. This count includes invalid "
"addresses (e.g., 0.0. 0.0) and addresses of unsupported "
"Classes (e.g., Class E). For entities that are not IP "
"Gateways and therefore do not forward datagrams, this counter "
"includes datagrams discarded because the destination address "
"was not a local address.",
"557", "Datagrams Forwarded/sec is the rate of input datagrams for "
"which this entity was not their final IP destination, as a "
"result of which an attempt was made to find a route to "
"forward them to that final destination. In entities that do "
"not act as IP Gateways, this rate will include only those "
"packets that were Source-Routed via this entity, and the "
"Source-Route option processing was successful.",
"559", "Datagrams Received Unknown Protocol is the number of "
"locally-addressed datagrams received successfully but "
"discarded because of an unknown or unsupported protocol.",
"561", "Datagrams Received Discarded is the number of input IP "
"datagrams for which no problems were encountered to prevent "
"their continued processing, but which were discarded (e.g., "
"for lack of buffer space). This counter does not include any "
"datagrams discarded while awaiting re-assembly.",
"563", "Datagrams Received Delivered/sec is the rate at which input "
"datagrams are successfully delivered to IP user-protocols "
"(including ICMP).",
"565", "Datagrams Sent/sec is the rate at which IP datagrams are "
"supplied to IP for transmission by local IP user-protocols "
"(including ICMP). That this counter does not include any "
"datagrams counted in Datagrams Forwarded.",
"567", "Datagrams Outbound Discarded is the number of output IP "
"datagrams for which no problems were encountered to prevent "
"their transmission to their destination, but which were "
"discarded (e.g., for lack of buffer space). This counter "
"would include datagrams counted in Datagrams Forwarded if any "
"such packets met this (discretionary) discard criterion.",
"569", "Datagrams Outbound No Route is the number of IP datagrams "
"discarded because no route could be found to transmit them to "
"their destination. This counter includes any packets counted "
"in Datagrams Forwarded that meet this `no route' criterion.",
"571", "Fragments Received/sec is the rate at which IP fragments that "
"need to be re-assembled at this entity are received.",
"573", "Fragments Re-assembled/sec is the rate at which IP fragments "
"are successfully re-assembled.",
"575", "Fragment Re-assembly Failures is the number of failures "
"detected by the IP re-assembly algorithm (for whatever "
"reason: timed out, errors, etc). This is not necessarily a "
"count of discarded IP fragments since some algorithms "
"(notably RFC 815) can lose track of the number of fragments "
"by combining them as they are received.",
"577", "Fragmented Datagrams/sec is the rate at which datagrams are "
"successfully fragmented at this entity.",
"579", "Fragmentation Failures is the number of IP datagrams that "
"have been discarded because they needed to be fragmented at "
"this entity but could not be, e.g., because their `Don't "
"Fragment' flag was set.",
"581", "Fragments Created/sec is the rate at which IP datagram "
"fragments have been generated as a result of fragmentation at "
"this entity.",
"583", "The ICMP performance object consists of counters that measure "
"the rates at which messages are sent and received by using "
"ICMP protocols. It also includes counters that monitor ICMP "
"protocol errors.",
"585", "Messages/sec is the total rate at which ICMP messages are "
"sent and received by the entity. The rate includes those "
"messages received or sent in error.",
"587", "Messages Received/sec is the rate at which ICMP messages are "
"received by the entity. The rate includes those messages "
"received in error.",
"589", "Messages Received Errors is the number of ICMP messages that "
"the entity received but determined as having errors (bad ICMP "
"checksums, bad length, etc)..",
"591", "Received Destination Unreachable is the number of ICMP "
"Destination Unreachable messages received.",
"593", "Received Time Exceeded is the number of ICMP Time Exceeded "
"messages received.",
"595", "Received Parameter Problem is the number of ICMP Parameter "
"Problem messages received.",
"597", "Received Source Quench is the number of ICMP Source Quench "
"messages received.",
"599", "Received Redirect/sec is the rate of ICMP Redirect messages "
"received.",
"601", "Received Echo/sec is the rate of ICMP Echo messages received.",
"603", "Received Echo Reply/sec is the rate of ICMP Echo Reply "
"messages received.",
"605", "Received Timestamp/sec is the rate of ICMP Timestamp "
"(request) messages received.",
"607", "Received Timestamp Reply/sec is the rate of ICMP Timestamp "
"Reply messages received.",
"609", "Received Address Mask is the number of ICMP Address Mask "
"Request messages received.",
"611", "Received Address Mask Reply is the number of ICMP Address "
"Mask Reply messages received.",
"613", "Messages Sent/sec is the rate at which ICMP messages are "
"attempted to be sent by the entity. The rate includes those "
"messages sent in error.",
"615", "Messages Outbound Errors is the number of ICMP messages that "
"this entity did not send due to problems discovered within "
"ICMP such as lack of buffers. This value does not include "
"errors discovered outside the ICMP layer, such as those "
"recording the failure of IP to route the resultant datagram. "
"In some implementations, none of the error types are included "
"in the value of this counter.",
"617", "Sent Destination Unreachable is the number of ICMP "
"Destination Unreachable messages sent.",
"619", "Sent Time Exceeded is the number of ICMP Time Exceeded "
"messages sent.",
"621", "Sent Parameter Problem is the number of ICMP Parameter "
"Problem messages sent.",
"623", "Sent Source Quench is the number of ICMP Source Quench "
"messages sent.",
"625", "Sent Redirect/sec is the rate of ICMP Redirect messages sent.",
"627", "Sent Echo/sec is the rate of ICMP Echo messages sent.",
"629", "Sent Echo Reply/sec is the rate of ICMP Echo Reply messages "
"sent.",
"631", "Sent Timestamp/sec is the rate of ICMP Timestamp (request) "
"messages sent.",
"633", "Sent Timestamp Reply/sec is the rate of ICMP Timestamp Reply "
"messages sent.",
"635", "Sent Address Mask is the number of ICMP Address Mask Request "
"messages sent.",
"637", "Sent Address Mask Reply is the number of ICMP Address Mask "
"Reply messages sent.",
"639", "The TCP performance object consists of counters that measure "
"the rates at which TCP Segments are sent and received by "
"using the TCP protocol. It includes counters that monitor the "
"number of TCP connections in each TCP connection state.",
"641", "Segments/sec is the rate at which TCP segments are sent or "
"received using the TCP protocol.",
"643", "Connections Established is the number of TCP connections for "
"which the current state is either ESTABLISHED or CLOSE-WAIT.",
"645", "Connections Active is the number of times TCP connections "
"have made a direct transition to the SYN-SENT state from the "
"CLOSED state.",
"647", "Connections Passive is the number of times TCP connections "
"have made a direct transition to the SYN-RCVD state from the "
"LISTEN state.",
"649", "Connection Failures is the number of times TCP connections "
"have made a direct transition to the CLOSED state from the "
"SYN-SENT state or the SYN-RCVD state, plus the number of "
"times TCP connections have made a direct transition to the "
"LISTEN state from the SYN-RCVD state.",
"651", "Connections Reset is the number of times TCP connections have "
"made a direct transition to the CLOSED state from either the "
"ESTABLISHED state or the CLOSE-WAIT state.",
"653", "Segments Received/sec is the rate at which segments are "
"received, including those received in error. This count "
"includes segments received on currently established "
"connections.",
"655", "Segments Sent/sec is the rate at which segments are sent, "
"including those on current connections, but excluding those "
"containing only retransmitted bytes.",
"657", "Segments Retransmitted/sec is the rate at which segments are "
"retransmitted, that is, segments transmitted containing one "
"or more previously transmitted bytes.",
"659", "The UDP performance object consists of counters that measure "
"the rates at which UDP datagrams are sent and received by "
"using the UDP protocol. It includes counters that monitor UDP "
"protocol errors.",
"661", "Datagrams/sec is the rate at which UDP datagrams are sent or "
"received by the entity.",
"663", "Datagrams Received/sec is the rate at which UDP datagrams are "
"delivered to UDP users.",
"665", "Datagrams No Port/sec is the rate of received UDP datagrams "
"for which there was no application at the destination port.",
"667", "Datagrams Received Errors is the number of received UDP "
"datagrams that could not be delivered for reasons other than "
"the lack of an application at the destination port.",
"669", "Datagrams Sent/sec is the rate at which UDP datagrams are "
"sent from the entity.",
"671", "Disk Storage device statistics from the foreign computer",
"673", "The number of allocation failures reported by the disk "
"storage device",
"675", "System Up Time is the elapsed time (in seconds) that the "
"computer has been running since it was last started. This "
"counter displays the difference between the start time and "
"the current time. ",
"677", "The current number of system handles in use.",
"679", "Free System Page Table Entries is the number of page table "
"entries not being used by the system. This counter displays "
"the last observed value only; it is not an average. ",
"681", "The number of threads currently active in this process. An "
"instruction is the basic unit of execution in a processor, "
"and a thread is the object that executes instructions. Every "
"running process has at least one thread.",
"683", "The current base priority of this process. Threads within a "
"process can raise and lower their own base priority relative "
"to the process' base priority.",
"685", "The total elapsed time (in seconds) this process has been "
"running.",
"687", "Alignment Fixups/sec is the rate of alignment faults fixed by "
"the system. This counter displays the difference between the "
"values observed in the last two samples, divided by the "
"duration of the sample interval.",
"689", "Exception Dispatches/sec is the rate of exceptions dispatched "
"by the system. This counter displays the difference between "
"the values observed in the last two samples, divided by the "
"duration of the sample interval.",
"691", "Floating Emulations/sec is the rate of floating emulations "
"performed by the system. This counter displays the "
"difference between the values observed in the last two "
"samples, divided by the duration of the sample interval.",
"693", "Logon/sec is the rate of all server logons.",
"695", "The current dynamic priority of this thread. The system can "
"raise the thread's dynamic priority above the base priority "
"if the thread is handling user input, or lower it towards the "
"base priority if the thread becomes compute bound.",
"697", "The current base priority of this thread. The system can "
"raise the thread's dynamic priority above the base priority "
"if the thread is handling user input, or lower it towards the "
"base priority if the thread becomes compute bound.",
"699", "The total elapsed time (in seconds) this thread has been "
"running.",
"701", "The Paging File performance object consists of counters that "
"monitor the paging file(s) on the computer. The paging file "
"is a reserved space on disk that backs up committed physical "
"memory on the computer.",
"703", "The amount of the Page File instance in use in percent. See "
"also Process: Page File Bytes.",
"705", "The peak usage of the Page File instance in percent. See "
"also Process: Page File Bytes Peak.",
"707", "Starting virtual address for this thread.",
"709", "Current User Program Counter for this thread.",
"711", "Mapped Space is virtual memory that has been mapped to a "
"specific virtual address (or range of virtual addresses) in "
"the process' virtual address space. No Access protection "
"prevents a process from writing to or reading from these "
"pages and will generate an access violation if either is "
"attempted.",
"713", "Mapped Space is virtual memory that has been mapped to a "
"specific virtual address (or range of virtual addresses) in "
"the process' virtual address space. Read Only protection "
"prevents the contents of these pages from being modified. "
"Any attempts to write or modify these pages will generate an "
"access violation.",
"715", "Mapped Space is virtual memory that has been mapped to a "
"specific virtual address (or range of virtual addresses) in "
"the process' virtual address space. Read/Write protection "
"allows a process to read, modify and write to these pages.",
"717", "Mapped Space is virtual memory that has been mapped to a "
"specific virtual address (or range of virtual addresses) in "
"the process' virtual address space. Write Copy protection "
"is used when memory is shared for reading but not for "
"writing. When processes are reading this memory, they can "
"share the same memory, however, when a sharing process wants "
"to have write access to this shared memory, a copy of that "
"memory is made.",
"719", "Mapped Space is virtual memory that has been mapped to a "
"specific virtual address (or range of virtual addresses) in "
"the process' virtual address space. Executable memory is "
"memory that can be executed by programs, but cannot be read "
"or written. This type of protection is not supported by all "
"processor types.",
"721", "Mapped Space is virtual memory that has been mapped to a "
"specific virtual address (or range of virtual addresses) in "
"the process' virtual address space. Execute/Read Only "
"memory is memory that can be executed as well as read.",
"723", "Mapped Space is virtual memory that has been mapped to a "
"specific virtual address (or range of virtual addresses) in "
"the process' virtual address space. Execute/Read/Write "
"memory is memory that can be executed by programs as well as "
"read and modified.",
"725", "Mapped Space is virtual memory that has been mapped to a "
"specific virtual address (or range of virtual addresses) in "
"the process' virtual address space. Execute Write Copy is "
"memory that can be executed by programs as well as read and "
"written. This type of protection is used when memory needs "
"to be shared between processes. If the sharing processes only "
"read the memory, then they will all use the same memory. If "
"a sharing process desires write access, then a copy of this "
"memory will be made for that process.",
"727", "Reserved Space is virtual memory that has been reserved for "
"future use by a process, but has not been mapped or "
"committed. No Access protection prevents a process from "
"writing to or reading from these pages and will generate an "
"access violation if either is attempted.",
"729", "Reserved Space is virtual memory that has been reserved for "
"future use by a process, but has not been mapped or "
"committed. Read Only protection prevents the contents of "
"these pages from being modified. Any attempts to write or "
"modify these pages will generate an access violation.",
"731", "Reserved Space is virtual memory that has been reserved for "
"future use by a process, but has not been mapped or "
"committed. Read/Write protection allows a process to read, "
"modify and write to these pages.",
"733", "Reserved Space is virtual memory that has been reserved for "
"future use by a process, but has not been mapped or "
"committed. Write Copy protection is used when memory is "
"shared for reading but not for writing. When processes are "
"reading this memory, they can share the same memory, however, "
"when a sharing process wants to have read/write access to "
"this shared memory, a copy of that memory is made.",
"735", "Reserved Space is virtual memory that has been reserved for "
"future use by a process, but has not been mapped or "
"committed. Executable memory is memory that can be executed "
"by programs, but cannot be read or written. This type of "
"protection is not supported by all processor types.",
"737", "Reserved Space is virtual memory that has been reserved for "
"future use by a process, but has not been mapped or "
"committed. Execute/Read Only memory is memory that can be "
"executed as well as read.",
"739", "Reserved Space is virtual memory that has been reserved for "
"future use by a process, but has not been mapped or "
"committed. Execute/Read/Write memory is memory that can be "
"executed by programs as well as read and modified.",
"741", "The Image performance object consists of counters that "
"monitor the virtual address usage of images executed by "
"processes on the computer.",
"743", "Reserved Space is virtual memory that has been reserved for "
"future use by a process, but has not been mapped or "
"committed. Execute Write Copy is memory that can be executed "
"by programs as well as read and written. This type of "
"protection is used when memory needs to be shared between "
"processes. If the sharing processes only read the memory, "
"then they will all use the same memory. If a sharing process "
"desires write access, then a copy of this memory will be made "
"for that process.",
"745", "Unassigned Space is mapped and committed virtual memory in "
"use by the process that is not attributable to any particular "
"image being executed by that process. No Access protection "
"prevents a process from writing to or reading from these "
"pages and will generate an access violation if either is "
"attempted.",
"747", "Unassigned Space is mapped and committed virtual memory in "
"use by the process that is not attributable to any particular "
"image being executed by that process. Read Only protection "
"prevents the contents of these pages from being modified. "
"Any attempts to write or modify these pages will generate an "
"access violation.",
"749", "Unassigned Space is mapped and committed virtual memory in "
"use by the process that is not attributable to any particular "
"image being executed by that process. Read/Write protection "
"allows a process to read, modify and write to these pages.",
"751", "Unassigned Space is mapped and committed virtual memory in "
"use by the process that is not attributable to any particular "
"image being executed by that process. Write Copy protection "
"is used when memory is shared for reading but not for "
"writing. When processes are reading this memory, they can "
"share the same memory, however, when a sharing process wants "
"to have read/write access to this shared memory, a copy of "
"that memory is made for writing to.",
"753", "Unassigned Space is mapped and committed virtual memory in "
"use by the process that is not attributable to any particular "
"image being executed by that process. Executable memory is "
"memory that can be executed by programs, but cannot be read "
"or written. This type of protection is not supported by all "
"processor types.",
"755", "Unassigned Space is mapped and committed virtual memory in "
"use by the process that is not attributable to any particular "
"image being executed by that process. Execute/Read Only "
"memory is memory that can be executed as well as read.",
"757", "Unassigned Space is mapped and committed virtual memory in "
"use by the process that is not attributable to any particular "
"image being executed by that process. Execute/Read/Write "
"memory is memory that can be executed by programs as well as "
"read and written.",
"759", "Unassigned Space is mapped and committed virtual memory in "
"use by the process that is not attributable to any particular "
"image being executed by that process. Execute Write Copy is "
"memory that can be executed by programs as well as read and "
"written. This type of protection is used when memory needs "
"to be shared between processes. If the sharing processes only "
"read the memory, then they will all use the same memory. If "
"a sharing process desires write access, then a copy of this "
"memory will be made for that process.",
"761", "Image Space is the virtual address space in use by the images "
"being executed by the process. This is the sum of all the "
"address space with this protection allocated by images run by "
"the selected process No Access protection prevents a process "
"from writing to or reading from these pages and will generate "
"an access violation if either is attempted.",
"763", "Image Space is the virtual address space in use by the images "
"being executed by the process. This is the sum of all the "
"address space with this protection allocated by images run by "
"the selected process Read Only protection prevents the "
"contents of these pages from being modified. Any attempts to "
"write or modify these pages will generate an access "
"violation.",
"765", "Image Space is the virtual address space in use by the images "
"being executed by the process. This is the sum of all the "
"address space with this protection allocated by images run by "
"the selected process Read/Write protection allows a process "
"to read, modify and write to these pages.",
"767", "Image Space is the virtual address space in use by the images "
"being executed by the process. This is the sum of all the "
"address space with this protection allocated by images run by "
"the selected process Write Copy protection is used when "
"memory is shared for reading but not for writing. When "
"processes are reading this memory, they can share the same "
"memory, however, when a sharing process wants to have "
"read/write access to this shared memory, a copy of that "
"memory is made for writing to.",
"769", "Image Space is the virtual address space in use by the images "
"being executed by the process. This is the sum of all the "
"address space with this protection allocated by images run by "
"the selected process Executable memory is memory that can be "
"executed by programs, but cannot be read or written. This "
"type of protection is not supported by all processor types.",
"771", "Image Space is the virtual address space in use by the images "
"being executed by the process. This is the sum of all the "
"address space with this protection allocated by images run by "
"the selected process Execute/Read Only memory is memory that "
"can be executed as well as read.",
"773", "Image Space is the virtual address space in use by the images "
"being executed by the process. This is the sum of all the "
"address space with this protection allocated by images run by "
"the selected process Execute/Read/Write memory is memory "
"that can be executed by programs as well as read and written "
"and modified.",
"775", "Image Space is the virtual address space in use by the images "
"being executed by the process. This is the sum of all the "
"address space with this protection allocated by images run by "
"the selected process Execute Write Copy is memory that can "
"be executed by programs as well as read and written. This "
"type of protection is used when memory needs to be shared "
"between processes. If the sharing processes only read the "
"memory, then they will all use the same memory. If a sharing "
"process desires write access, then a copy of this memory will "
"be made for that process.",
"777", "Bytes Image Reserved is the sum of all virtual memory "
"reserved by images run within this process.",
"779", "Bytes Image Free is the amount of virtual address space that "
"is not in use or reserved by images within this process.",
"781", "Bytes Reserved is the total amount of virtual memory reserved "
"for future use by this process.",
"783", "Bytes Free is the total unused virtual address space of this "
"process.",
"785", "ID Process is the unique identifier of this process. ID "
"Process numbers are reused, so they only identify a process "
"for the lifetime of that process.",
"787", "The Process Address Space performance object consists of "
"counters that monitor memory allocation and use for a "
"selected process.",
"789", "Image Space is the virtual address space in use by the "
"selected image with this protection. No Access protection "
"prevents a process from writing or reading these pages and "
"will generate an access violation if either is attempted.",
"791", "Image Space is the virtual address space in use by the "
"selected image with this protection. Read Only protection "
"prevents the contents of these pages from being modified. "
"Any attempts to write or modify these pages will generate an "
"access violation.",
"793", "Image Space is the virtual address space in use by the "
"selected image with this protection. Read/Write protection "
"allows a process to read, modify and write to these pages.",
"795", "Image Space is the virtual address space in use by the "
"selected image with this protection. Write Copy protection "
"is used when memory is shared for reading but not for "
"writing. When processes are reading this memory, they can "
"share the same memory, however, when a sharing process wants "
"to have read/write access to this shared memory, a copy of "
"that memory is made for writing to.",
"797", "Image Space is the virtual address space in use by the "
"selected image with this protection. Executable memory is "
"memory that can be executed by programs, but cannot be read "
"or written. This type of protection is not supported by all "
"processor types.",
"799", "Image Space is the virtual address space in use by the "
"selected image with this protection. Execute/Read Only "
"memory is memory that can be executed as well as read.",
"801", "Image Space is the virtual address space in use by the "
"selected image with this protection. Execute/Read/Write "
"memory is memory that can be executed by programs as well as "
"read and written.",
"803", "Image Space is the virtual address space in use by the "
"selected image with this protection. Execute Write Copy is "
"memory that can be executed by programs as well as read and "
"written. This type of protection is used when memory needs "
"to be shared between processes. If the sharing processes "
"only read the memory, then they will all use the same memory. "
" If a sharing process desires write access, then a copy of "
"this memory will be made for that process.",
"805", "ID Thread is the unique identifier of this thread. ID Thread "
"numbers are reused, so they only identify a thread for the "
"lifetime of that thread.",
"807", "Mailslot Opens Failed/sec indicates the rate of mailslot "
"messages received by this workstation that were to be "
"delivered to mailslots that are not present on this "
"workstation.",
"809", "Duplicate Master Announcements indicates the number of times "
"that the master browser has detected another master browser "
"on the same domain.",
"811", "Illegal Datagrams/sec is the rate of incorrectly formatted "
"datagrams that have been received by the workstation.",
"813", "Announcements Total/sec is the sum of Announcements "
"Server/sec and Announcements Domain/sec.",
"815", "Enumerations Total/sec is the rate of browse requests that "
"have been processed by this workstation. This is the sum of "
"Enumerations Server, Enumerations Domain, and Enumerations "
"Other.",
"817", "The Thread Details performance object consists of counters "
"that measure aspects of thread behavior that are difficult or "
"time-consuming or collect. These counters are distinguished "
"from those in the Thread object by their high overhead.",
"819", "Cache Bytes is the sum of the System Cache Resident Bytes, "
"System Driver Resident Bytes, System Code Resident Bytes, "
"and Pool Paged Resident Bytes counters. "
"This counter displays the last observed value only; it is not "
"an average. ",
"821", "Cache Bytes Peak is the maximum value of Cache Bytes since "
"the system was last restarted. This value "
"might be larger than the current size of the cache. "
"Cache Bytes is the sum of the System Cache Resident Bytes, "
"System Driver Resident Bytes, System Code Resident Bytes, "
"and Pool Paged Resident Bytes counters. This counter "
"displays the last observed value only; it is not an average. ",
"823", "Pages Input/sec is the number of pages read from disk to "
"resolve hard page faults. (Hard page faults occur when a "
"process requires code or data that is not in its working set "
"or elsewhere in physical memory, and must be retrieved from "
"disk). This counter was designed as a primary indicator of "
"the kinds of faults that cause system-wide delays. It "
"includes pages retrieved to satisfy faults in the file system "
"cache (usually requested by applications) and in non-cached "
"mapped memory files. This counter counts numbers of pages, "
"and can be compared to other counts of pages, such as Memory: "
"Page Faults/sec, without conversion. This counter displays "
"the difference between the values observed in the last two "
"samples, divided by the duration of the sample interval. ",
"825", "The FTP Service performance object consists of counters that "
"monitor FTP Service transfer rates, users, and connections.",
"827", "Bytes Sent/sec is the rate at which data bytes are sent by "
"the FTP Service.",
"829", "Bytes Received/sec is the rate at which data bytes are "
"received by the FTP Service.",
"831", "Bytes Total/sec is the sum of Bytes Sent/sec and Bytes "
"Received/sec. This is the total rate of bytes transferred by "
"the FTP Service.",
"833", "Files Sent is the total number of files sent by the FTP "
"Service.",
"835", "Files Received is the total number of files received by the "
"FTP Service.",
"837", "Files Total is the sum of Files Sent and Files Received. "
"This is the total number of files transferred by the FTP "
"Service.",
"839", "Current Anonymous Users is the number of anonymous users "
"currently connected to the FTP Service.",
"841", "Current NonAnonymous Users is the number of non-anonymous "
"users currently connected to the FTP Service.",
"843", "Total Anonymous Users is the total number of anonymous users "
"that have ever connected to the FTP Service.",
"845", "Total NonAnonymous Users is the total number of non-anonymous "
"users that have ever connected to the FTP Service.",
"847", "Maximum Anonymous Users is the maximum number of anonymous "
"users simultaneously connected to the FTP Service.",
"849", "Maximum NonAnonymous Users is the maximum number of "
"non-anonymous users simultaneously connected to the FTP "
"Service.",
"851", "Current Connections is the current number of connections to "
"the FTP Service.",
"853", "Maximum Connections is the maximum number of simultaneous "
"connections to the FTP Service.",
"855", "Connection Attempts is the number of connection attempts that "
"have been made to the FTP Service.",
"857", "Logon Attempts is the number of logon attempts that have been "
"made by the FTP Service.",
"871", "The RAS performance object consists of counters that monitor "
"individual Remote Access Service ports of the RAS device on "
"the computer.",
"873", "The number of bytes transmitted total for this connection.",
"875", "The number of bytes received total for this connection.",
"877", "The number of data frames transmitted total for this "
"connection.",
"879", "The number of data frames received total for this connection.",
"881", "The compression ratio for bytes being transmitted.",
"883", "The compression ratio for bytes being received.",
"885", "The total number of CRC Errors for this connection. CRC "
"Errors occur when the frame received contains erroneous data.",
"887", "The total number of Timeout Errors for this connection. "
"Timeout Errors occur when an expected is not received in "
"time.",
"889", "The total number of Serial Overrun Errors for this "
"connection. Serial Overrun Errors occur when the hardware "
"cannot handle the rate at which data is received.",
"891", "The total number of Alignment Errors for this connection. "
"Alignment Errors occur when a byte received is different from "
"the byte expected.",
"893", "The total number of Buffer Overrun Errors for this "
"connection. Buffer Overrun Errors when the software cannot "
"handle the rate at which data is received.",
"895", "The total number of CRC, Timeout, Serial Overrun, Alignment, "
"and Buffer Overrun Errors for this connection.",
"897", "The number of bytes transmitted per second.",
"899", "The number of bytes received per second.",
"901", "The number of frames transmitted per second.",
"903", "The number of frames received per second.",
"905", "The total number of CRC, Timeout, Serial Overrun, Alignment, "
"and Buffer Overrun Errors per second.",
"907", "The RAS performance object consists of counters that combine "
"values for all ports of the Remote Access service (RAS) "
"device on the computer.",
"909", "The total number of Remote Access connections.",
"921", "The WINS Server performance object consists of counters that "
"monitor communications using the WINS Server service.",
"923", "Unique Registrations/sec is the rate at which unique "
"registration are received by the WINS server.",
"925", "Group Registrations/sec is the rate at which group "
"registration are received by the WINS server.",
"927", "Total Number of Registrations/sec is the sum of the Unique "
"and Group registrations per sec. This is the total rate at "
"which registration are received by the WINS server.",
"929", "Unique Renewals/sec is the rate at which unique renewals are "
"received by the WINS server.",
"931", "Group Renewals/sec is the rate at which group renewals are "
"received by the WINS server.",
"933", "Total Number of Renewals/sec is the sum of the Unique and "
"Group renewals per sec. This is the total rate at which "
"renewals are received by the WINS server.",
"935", "Total Number of Releases/sec is the rate at which releases "
"are received by the WINS server.",
"937", "Total Number of Queries/sec is the rate at which queries are "
"received by the WINS server.",
"939", "Unique Conflicts/sec is the rate at which unique "
"registrations/renewals received by the WINS server resulted "
"in conflicts with records in the database.",
"941", "Group Conflicts/sec is the rate at which group registration "
"received by the WINS server resulted in conflicts with "
"records in the database.",
"943", "Total Number of Conflicts/sec is the sum of the Unique and "
"Group conflicts per sec. This is the total rate at which "
"conflicts were seen by the WINS server.",
"945", "Total Number of Successful Releases/sec",
"947", "Total Number of Failed Releases/sec",
"949", "Total Number of Successful Queries/sec",
"951", "Total Number of Failed Queries/sec",
"953", "The total number of handles currently open by this process. "
"This number is the sum of the handles currently open by each "
"thread in this process.",
"1001", "Services for Macintosh AFP File Server.",
"1003", "The maximum amount of paged memory resources used by the "
"MacFile Server.",
"1005", "The current amount of paged memory resources used by the "
"MacFile Server.",
"1007", "The maximum amount of nonpaged memory resources use by the "
"MacFile Server.",
"1009", "The current amount of nonpaged memory resources used by the "
"MacFile Server.",
"1011", "The number of sessions currently connected to the MacFile "
"server. Indicates current server activity.",
"1013", "The maximum number of sessions connected at one time to the "
"MacFile server. Indicates usage level of server.",
"1015", "The number of internal files currently open in the MacFile "
"server. This count does not include files opened on behalf of "
"Macintosh clients.",
"1017", "The maximum number of internal files open at one time in the "
"MacFile server. This count does not include files opened on "
"behalf of Macintosh clients.",
"1019", "The number of failed logon attempts to the MacFile server. "
"Can indicate whether password guessing programs are being "
"used to crack the security on the server.",
"1021", "The number of bytes read from disk per second.",
"1023", "The number of bytes written to disk per second.",
"1025", "The number of bytes received from the network per second. "
"Indicates how busy the server is.",
"1027", "The number of bytes sent on the network per second. "
"Indicates how busy the server is.",
"1029", "The number of outstanding work items waiting to be processed.",
"1031", "The maximum number of outstanding work items waiting at one "
"time.",
"1033", "The current number of threads used by MacFile server. "
"Indicates how busy the server is.",
"1035", "The maximum number of threads used by MacFile server. "
"Indicates peak usage level of server.",
"1051", "AppleTalk Protocol",
"1053", "Number of packets received per second by Appletalk on this "
"port.",
"1055", "Number of packets sent per second by Appletalk on this port.",
"1057", "Number of bytes received per second by Appletalk on this "
"port.",
"1059", "Number of bytes sent per second by Appletalk on this port.",
"1061", "Average time in milliseconds to process a DDP packet on this "
"port.",
"1063", "Number of DDP packets per second received by Appletalk on "
"this port.",
"1065", "Average time in milliseconds to process an AARP packet on "
"this port.",
"1067", "Number of AARP packets per second received by Appletalk on "
"this port.",
"1069", "Average time in milliseconds to process an ATP packet on this "
"port.",
"1071", "Number of ATP packets per second received by Appletalk on "
"this port.",
"1073", "Average time in milliseconds to process an NBP packet on this "
"port.",
"1075", "Number of NBP packets per second received by Appletalk on "
"this port.",
"1077", "Average time in milliseconds to process a ZIP packet on this "
"port.",
"1079", "Number of ZIP packets per second received by Appletalk on "
"this port.",
"1081", "Average time in milliseconds to process an RTMP packet on "
"this port.",
"1083", "Number of RTMP packets per second received by Appletalk on "
"this port.",
"1085", "Number of ATP requests retransmitted on this port.",
"1087", "Number of ATP release timers that have expired on this port.",
"1089", "Number of ATP Exactly-once transaction responses per second "
"on this port.",
"1091", "Number of ATP At-least-once transaction responses per second "
"on this port.",
"1093", "Number of ATP transaction release packets per second received "
"on this port.",
"1095", "The current amount of nonpaged memory resources used by "
"AppleTalk.",
"1097", "Number of packets routed in on this port.",
"1099", "Number of packets dropped due to resource limitations on this "
"port.",
"1101", "Number of ATP requests retransmitted to this port.",
"1103", "Number of packets routed out on this port.",
"1111", "Provides Network Statistics for the local network segment via "
"the Network Monitor Service.",
"1113", "The total number of frames received per second on this "
"network segment.",
"1115", "The number of bytes received per second on this network "
"segment.",
"1117", "The number of Broadcast frames received per second on this "
"network segment.",
"1119", "The number of Multicast frames received per second on this "
"network segment.",
"1121", "Percentage of network bandwidth in use on this network "
"segment.",
"1125", "Percentage of network bandwidth which is made up of broadcast "
"traffic on this network segment.",
"1127", "Percentage of network bandwidth which is made up of multicast "
"traffic on this network segment.",
"1151", "The Telephony System",
"1153", "The number of telephone lines serviced by this computer.",
"1155", "The number of telephone devices serviced by this computer.",
"1157", "The number of telephone lines serviced by this computer that "
"are currently active.",
"1159", "The number of telephone devices that are currently being "
"monitored.",
"1161", "The rate of outgoing calls made by this computer.",
"1163", "The rate of incoming calls answered by this computer.",
"1165", "The number of applications that are currently using telephony "
"services.",
"1167", "Current outgoing calls being serviced by this computer.",
"1169", "Current incoming calls being serviced by this computer.",
"1229", "The Gateway Service For NetWare performance object consists "
"of counters that measure the Gateway Server service.",
"1231", "The Client Service For NetWare object consists of counters "
"that measure packet transmission rates, logons, and "
"connections.",
"1233", "Packet Burst Read NCP Count/sec is the rate of NetWare Core "
"Protocol requests for Packet Burst Read. Packet Burst is a "
"windowing protocol that improves performance.",
"1235", "Packet Burst Read Timeouts/sec is the rate the NetWare "
"Service needs to retransmit a Burst Read Request because the "
"NetWare server took too long to respond.",
"1237", "Packet Burst Write NCP Count/sec is the rate of NetWare Core "
"Protocol requests for Packet Burst Write. Packet Burst is a "
"windowing protocol that improves performance.",
"1239", "Packet Burst Write Timeouts/sec is the rate the NetWare "
"Service needs to retransmit a Burst Write Request because the "
"NetWare server took too long to respond.",
"1241", "Packet Burst IO/sec is the sum of Packet Burst Read NCPs/sec "
"and Packet Burst Write NCPs/sec.",
"1243", "Connect NetWare 2.x counts connections to NetWare 2.x "
"servers.",
"1245", "Connect NetWare 3.x counts connections to NetWare 3.x "
"servers.",
"1247", "Connect NetWare 4.x counts connections to NetWare 4.x "
"servers.",
"1261", "Logon Total includes all interactive logons, network logons, "
"service logons, successful logon, and failed logons since the "
"machine is last rebooted.",
"1301", "The Server Work Queues performance object consists of "
"counters that monitor the length of the queues and objects in "
"the queues.",
"1303", "Queue Length is the current length of the server work queue "
"for this CPU. A sustained queue length greater than four "
"might indicate processor congestion. This is an instantaneous "
"count, not an average over time.",
"1305", "Active Threads is the number of threads currently working on "
"a request from the server client for this CPU. The system "
"keeps this number as low as possible to minimize unnecessary "
"context switching. This is an instantaneous count for the "
"CPU, not an average over time.",
"1307", "Available Threads is the number of server threads on this CPU "
"not currently working on requests from a client. The server "
"dynamically adjusts the number of threads to maximize server "
"performance.",
"1309", "Every request from a client is represented in the server as a "
"'work item,' and the server maintains a pool of available "
"work items per CPU to speed processing. This is the "
"instantaneous number of available work items for this CPU. A "
"sustained near-zero value indicates the need to increase the "
"MinFreeWorkItems registry value for the Server service. This "
"value will always be 0 in the Blocking Queue instance.",
"1311", "Every request from a client is represented in the server as a "
"'work item,' and the server maintains a pool of available "
"work items per CPU to speed processing. When a CPU runs out "
"of work items, it borrows a free work item from another CPU. "
"An increasing value of this running counter might indicate "
"the need to increase the 'MaxWorkItems' or 'MinFreeWorkItems' "
"registry values for the Server service. This value will "
"always be 0 in the Blocking Queue instance.",
"1313", "Every request from a client is represented in the server as a "
"'work item,' and the server maintains a pool of available "
"work items per CPU to speed processing. A sustained value "
"greater than zero indicates the need to increase the "
"'MaxWorkItems' registry value for the Server service. This "
"value will always be 0 in the Blocking Queue instance.",
"1315", "Current Clients is the instantaneous count of the clients "
"being serviced by this CPU. The server actively balances the "
"client load across all of the CPU's in the system. This "
"value will always be 0 in the Blocking Queue instance.",
"1317", "The rate at which the Server is receiving bytes from the "
"network clients on this CPU. This value is a measure of how "
"busy the Server is.",
"1319", "The rate at which the Server is sending bytes to the network "
"clients on this CPU. This value is a measure of how busy the "
"Server is.",
"1321", "The rate at which the Server is sending and receiving bytes "
"with the network clients on this CPU. This value is a measure "
"of how busy the Server is.",
"1323", "Read Operations/sec is the rate the server is performing file "
"read operations for the clients on this CPU. This value is a "
"measure of how busy the Server is. This value will always be "
"0 in the Blocking Queue instance.",
"1325", "Read Bytes/sec is the rate the server is reading data from "
"files for the clients on this CPU. This value is a measure of "
"how busy the Server is.",
"1327", "Write Operations/sec is the rate the server is performing "
"file write operations for the clients on this CPU. This "
"value is a measure of how busy the Server is. This value "
"will always be 0 in the Blocking Queue instance.",
"1329", "Write Bytes/sec is the rate the server is writing data to "
"files for the clients on this CPU. This value is a measure of "
"how busy the Server is.",
"1331", "Total Bytes/sec is the rate the Server is reading and writing "
"data to and from the files for the clients on this CPU. This "
"value is a measure of how busy the Server is.",
"1333", "Total Operations/sec is the rate the Server is performing "
"file read and file write operations for the clients on this "
"CPU. This value is a measure of how busy the Server is. "
"This value will always be 0 in the Blocking Queue instance.",
"1335", "DPCs Queued/sec is the overall rate at which deferred "
"procedure calls (DPCs) are added to the processor's DPC "
"queue. (DPCs are interrupts that run at a lower priority than "
"standard interrupts. Each processor has its own DPC queue). "
"This counter measures the rate at which DPCs are added to the "
"queue, not the number of DPCs in the queue. This counter "
"displays the difference between the values observed in the "
"last two samples, divided by the duration of the sample "
"interval. ",
"1337", "DPC Rate is the rate at which deferred procedure calls (DPCs) "
"are added to the processor's DPC queue between the timer ticks "
"of the processor clock. (DPCs are interrupts that run at a "
"lower priority than standard interrupts. Each processor has "
"its own DPC queue). This counter measures the rate at which "
"DPCs are added to the queue, not the number of DPCs in the "
"queue. This counter displays the last observed value only; it "
"is not an average. ",
"1343", "Total DPCs Queued/sec is the combined rate at which deferred "
"procedure calls (DPCs) are added to the DPC queue of all "
"processors on the computer. (DPCs are interrupts that run at "
"a lower priority than standard interrupts). Each processor "
"has its own DPC queue. This counter measures the rate at "
"which DPCs are added to the queue, not the number of DPCs in "
"the queue. It is the sum of Processor: DPCs Queued/sec for "
"all processors on the computer, divided by the number of "
"processors. This counter displays the difference between the "
"values observed in the last two samples, divided by the "
"duration of the sample interval. ",
"1345", "Total DPC Rate is the combined rate at which deferred "
"procedure calls (DPCs) are added to the DPC queues of all "
"processors between timer ticks of each processor's system "
"clock. (DPCs are interrupts that run at a lower priority than "
"standard interrupts). Each processor has its own DPC queue. "
"clock on the processor. This counter measures the rate at "
"which DPCs are added to the queue, not the number of DPCs in "
"the queue. It is the sum of Processor: DPC Rate for all "
"processors on the computer, divided by the number of "
"processors. This counter displays the last observed value "
"only; it is not an average. ",
"1351", "% Registry Quota In Use is the percentage of the Total "
"Registry Quota Allowed that is currently being used by the "
"system. This counter displays the current percentage value "
"only; it is not an average. ",
"1361", "Counters that indicate the status of local and system Very Large "
"memory allocations.",
"1363", "VLM % Virtual Size In Use",
"1365", "Current size of the process VLM Virtual memory space in bytes.",
"1367", "The peak size of the process VLM virtual memory space in bytes. "
"This value indicates the maximum size of the process VLM virtual "
"memory since the process started.",
"1369", "The current size of the process VLM virtual memory space in bytes "
"that may be allocated. Note that the maximum allocation allowed "
"may be smaller than this value due to fragmentation of the "
"memory space.",
"1371", "The current size of committed VLM memory space for the current "
"process in bytes.",
"1373", "The peak size of the committed VLM memory space in bytes for "
"the current process since the process started.",
"1375", "The current size of all committed VLM memory space in bytes for "
"the system.",
"1377", "The peak size of all committed VLM memory space in bytes since "
"the system was started.",
"1379", "The current size of all committed shared VLM memory space "
"in bytes for the system.",
"1381", "Available KBytes is the amount of physical memory available "
"to processes running on the computer, in Kilobytes (Bytes / 1,024). "
"It is calculated by summing space on the Zeroed, Free, and Stand by "
"memory lists. Free memory is ready for use; Zeroed memory are "
"pages of memory filled with zeros to prevent later processes "
"from seeing data used by a previous process. Standby memory "
"is memory removed from a process' working set (its physical "
"memory) on route to disk, but is still available to be "
"recalled. This counter displays the last observed value only; "
"it is not an average. ",
"1383", "Available MBytes is the amount of physical memory available "
"to processes running on the computer, in Megabytes (Bytes / 1,048,576). "
"It is calculated by summing space on the Zeroed, Free, and Stand by "
"memory lists. Free memory is ready for use; Zeroed memory are "
"pages of memory filled with zeros to prevent later processes "
"from seeing data used by a previous process. Standby memory "
"is memory removed from a process' working set (its physical "
"memory) on route to disk, but is still available to be "
"recalled. This counter displays the last observed value only; "
"it is not an average. ",
"1401", "Avg. Disk Queue Length is the average number of both read and "
"write requests that were queued for the selected disk during "
"the sample interval.",
"1403", "Avg. Disk Read Queue Length is the average number of read "
"requests that were queued for the selected disk during the "
"sample interval.",
"1405", "Avg. Disk Write Queue Length is the average number of write "
"requests that were queued for the selected disk during the "
"sample interval.",
"1407", "% Committed Bytes In Use is the ratio of Memory: Committed "
"Bytes to Memory: Commit Limit. (Committed memory is physical "
"memory in use for which space has been reserved in the paging "
"file should it need to be written to disk. The commit limit "
"is determined by the size of the paging file. If the paging "
"file is enlarged, the commit limit increases, and the ratio "
"is reduced). This counter displays the current percentage "
"value only; it is not an average.",
"1409", "The Full Image performance object consists of counters that "
"monitor the virtual address usage of images executed by "
"processes on the computer. "
"Full Image counters are the same counters as contained in "
"Image object with the only difference being the instance "
"name. In the Full Image object, the instance name "
"includes the full file path name of the loaded modules, "
"while in the Image object only the filename is displayed.",
"1411", "The Creating Process ID value is the Process ID of the process "
"that created the process. Note that the creating process may "
"have terminated since this process was created and so this "
"value may no longer identify a running process.",
"1413", "The rate the process is issuing read I/O operations. "
"This counter counts all I/O activity generated by the process "
"to include file, network and device I/O's.",
"1415", "The rate the process is issuing write I/O operations. "
"This counter counts all I/O activity generated by the process "
"to include file, network and device I/O's.",
"1417", "The rate the process is issuing read and write I/O operations. "
"This counter counts all I/O activity generated by the process "
"to include file, network and device I/O's.",
"1419", "The rate the process is issuing I/O operations that are neither "
"a read or a write operation. An example of this type of operation "
"would be a control function. "
"This counter counts all I/O activity generated by the process "
"to include file, network and device I/O's.",
"1421", "The rate the process is reading bytes from I/O operations. "
"This counter counts all I/O activity generated by the process "
"to include file, network and device I/O's.",
"1423", "The rate the process is writing bytes to I/O operations. "
"This counter counts all I/O activity generated by the process "
"to include file, network and device I/O's.",
"1425", "The rate the process is reading and writing bytes in I/O operations. "
"This counter counts all I/O activity generated by the process "
"to include file, network and device I/O's.",
"1427", "The rate the process is issuing bytes to I/O operations that don't "
"involve data such as control operations. "
"This counter counts all I/O activity generated by the process "
"to include file, network and device I/O's.",
"1451", "Displays performance statistics about a Print Queue.",
"1453", "Total number of jobs printed on a print queue since the last restart.",
"1455", "Number of bytes per second printed on a print queue.",
"1457", "Total number of pages printed through GDI on a print "
"queue since the last restart.",
"1459", "Current number of jobs in a print queue.",
"1461", "Current number of references (open handles) to this printer.",
"1463", "Peak number of references (open handles) to this printer.",
"1465", "Current number of spooling jobs in a print queue.",
"1467", "Maximum number of spooling jobs in a print queue since last "
"restart.",
"1469", "Total number of out of paper errors in a print queue since "
"the last restart.",
"1471", "Total number of printer not ready errors in a print queue "
"since the last restart.",
"1473", "Total number of job errors in a print queue since last restart.",
"1475", "Total number of calls from browse clients to this print "
"server to request network browse lists since last restart.",
"1477", "Total number of calls from other print servers to add shared "
"network printers to this server since last restart.",
"1479", "Working Set - Private displays the size of the working set, "
"in bytes, that is use for this process only and not shared "
"nor sharable by other processes.",
"1481", "Working Set - Shared displays the size of the working set, "
"in bytes, that is sharable and may be used by other processes. "
"Because a portion of a process' working set is shareable, "
"does not necessarily mean that other processes are using it.",
"1483", "% Idle Time reports the percentage of time during the sample "
"interval that the disk was idle.",
"1485", "Split IO/Sec reports the rate that I/Os to the disk were split "
"into multiple I/Os. A split I/O may result from requesting "
"data in a size that is too large to fit into a single I/O "
"or that the disk is fragmented.",
"1501", "Reports the accounting and processor usage data collected by "
"each active named Job object.",
"1503", "Current % Processor Time shows the percentage of the sample "
"interval that the process in the Job object spent executing "
"code.",
"1505", "Current % User mode Time shows the percentage of the sample "
"interval that the processes in the Job object spent executing "
"code in user mode.",
"1507", "Current % Kernel mode Time shows the percentage of the sample "
"interval that the processes in the Job object spent executing "
"code in kernel or privileged mode.",
"1509", "This Period mSec - Processor shows the number of milliseconds "
"of processor time used by all the processes in the Job object, "
"including those that have terminated or that are no longer "
"associated with the Job object, since the last time a time "
"limit on the Job was established.",
"1511", "This Period mSec - User mode shows the number of milliseconds "
"of user mode processor time used by all the processes in the "
"Job object, including those that have terminated or that are "
"no longer associated with the Job object, since the last time "
"a time limit on the Job was established.",
"1513", "This Period mSec - Kernel mode shows the number of "
"milliseconds of kernel mode processor time used by all the "
"processes in the Job object, including those that have "
"terminated or that are no longer associated with the Job "
"object, since the last time a time limit on the Job was "
"established.",
"1515", "Pages/Sec shows the page fault rate of all the processes in "
"the Job object.",
"1517", "Process Count - Total shows the number of processes, both "
"active and terminated, that are or have been associated "
"with the Job object.",
"1519", "Process Count - Active shows the number of processes that "
"are currently associated with the Job object.",
"1521", "Process Count - Terminated shows the number of processes "
"that have been terminated because of a limit violation.",
"1523", "Total mSec - Processor shows the number of milliseconds "
"of processor time used by all the processes in the Job "
"object, including those that have terminated or that are "
"no longer associated with the Job object, since the Job "
"object was created.",
"1525", "Total mSec - User mode shows the number of milliseconds "
"of user mode processor time used by all the processes in "
"the Job object, including those that have terminated or "
"that are no longer associated with the Job object, since "
"the Job object was created.",
"1527", "Total mSec - Kernel mode shows the number of milliseconds "
"of kernel mode processor time used by all the processes "
"in the Job object, including those that have terminated "
"or that are no longer associated with the Job object, "
"since the Job object was created.",
"1549", "% Job object Details shows detailed performance information "
"about the active processes that make up a Job object.",
"1747", "% Idle Time",
"1749", "% C1 Time",
"1751", "% C2 Time",
"1753", "% C3 Time",
"1755", "C1 Transitions/sec",
"1757", "C2 Transitions/sec",
"1759", "C3 Transitions/sec",
"1761", "Heap performance counters for must used heaps",
"1763", "Memory actively used by this heap (FreeBytes + AllocatedBytes)",
"1765", "Total virtual address space reserved for this heap (includes uncommitted ranges)",
"1767", "ReservedBytes minus last uncommitted range in each segment",
"1769", "Memory on freelists in this heap (does not include uncommitted ranges or blocks in heap cache)",
"1771", "Number of blocks on the list of free blocks >1k in size",
"1773", "1/Average time per allocation (excluding allocs from heap cache)",
"1775", "1/Average time per free (excluding frees to heap cache)",
"1777", "Number of uncommitted ranges in the reserved virtual address",
"1779", "Difference between number of allocations and frees (for leak detection)",
"1781", "Allocations/sec from heap cache",
"1783", "Frees/sec from heap cache",
"1785", "Allocations/sec of size <1k bytes (including heap cache)",
"1787", "Frees/sec of size <1k bytes (including heap cache)",
"1789", "Allocations/sec of size 1-8k bytes",
"1791", "Frees/sec of size 1-8k bytes",
"1793", "Allocations/sec of size over 8k bytes ",
"1795", "Frees/sec of size over 8k bytes",
"1797", "Allocations/sec (including from heap cache)",
"1799", "Frees/sec (including to heap cache)",
"1801", "Total number of blocks in the heap cache ",
"1803", "Largest number of blocks of any one size in the heap cache",
"1805", "(FreeBytes / CommittedBytes) *100",
"1807", "(VirtualBytes / ReservedBytes) * 100",
"1809", "Collisions/sec on the heap lock",
"1847", "End Marker";
Reference in a new issue View git blame Copy permalink