windows-nt/Source/XPSP1/NT/net/snmp/mibs/wfospf.mib
2020-09-26 16:20:57 +08:00

2099 lines
46 KiB
Plaintext

-- Wellfleet-Series7-MIB
-- Creation date : Tue Feb 21 11:03:44 EST 1995
-- Series 7 Software Release:
-- Copyright 1994 Wellfleet Communications, Inc. All Rights
-- Reserved. Reproduction of this document is authorized on
-- condition that the foregoing copyright notice is included.
-- This Wellfleet SNMP Management Information Base Specification
-- (Specification) embodies Wellfleet's confidential and
-- proprietary intellectual property. Wellfleet retains all
-- title and ownership in the Specification, including any
-- revisions.
--
-- It is Wellfleet's intent to encourage the widespread use of
-- this Specification in connection with the management of
-- Wellfleet products. Wellfleet grants vendors, end-users,
-- and other interested parties a non-exclusive license to
-- use this Specification in connection with the management
-- of Wellfleet products utilizing series 7.xx system software.
--
-- This Specification is supplied "AS IS", and Wellfleet makes
-- no warranty, either expressed or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- Copyright text courtesy of D. Perkins.
RFC7777-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress, Counter, Gauge, TimeTicks, Opaque, enterprises
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB;
wellfleet OBJECT IDENTIFIER ::= { enterprises 18 }
wfOspfGeneralGroup OBJECT IDENTIFIER ::= { wellfleet 3 5 3 2 3 1 }
wfOspfGeneralDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'This value determines whether OSPF is configured'
"
DEFVAL { created }
::= { wfOspfGeneralGroup 1 }
wfOspfGeneralDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The administrative status of OSPF in the router. The
value 'enabled' denotes that the OSPF Process is active
on at least one interface; 'disabled' disables it on
all interfaces.'
"
DEFVAL { enabled }
::= { wfOspfGeneralGroup 2 }
wfOspfGeneralState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
init(3),
notpresent(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The state of OSPF'
"
DEFVAL { down }
::= { wfOspfGeneralGroup 3 }
wfOspfRouterId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'A 32-bit integer uniquely identifying the router in
the Autonomous System.
By convention, to ensure uniqueness, this should
default to the value of one of the router's IP
interface addresses.'
REFERENCE
'OSPF Version 2, C.1 Global parameters'
"
::= { wfOspfGeneralGroup 4 }
wfOspfVersionNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The current version number of the OSPF protocol is 2.'
REFERENCE
'OSPF Version 2, Title'
"
::= { wfOspfGeneralGroup 5 }
wfOspfAreaBdrRtrStatus OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'A flag to note whether this router is an area border
router.'
REFERENCE
'OSPF Version 2, Section 3 Splitting the AS into Areas'
"
DEFVAL { false }
::= { wfOspfGeneralGroup 6 }
wfOspfASBdrRtrStatus OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'A flag to note whether this router is an Autonomous
System border router.'
REFERENCE
'OSPF Version 2, Section 3.3 Classification of routers'
"
DEFVAL { false }
::= { wfOspfGeneralGroup 7 }
wfOspfTOSSupport OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The router's support for type-of-service routing.'
REFERENCE
'OSPF Version 2, Appendix F.1.2 Optional TOS support'
"
DEFVAL { false }
::= { wfOspfGeneralGroup 8 }
wfOspfSpfHoldDown OBJECT-TYPE
SYNTAX INTEGER {
defval(1),
maximum(10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
Hold Down Timer for the SPF. The SPF will run at most
once per hold down timer value. A value of 0 means no
hold down.
"
DEFVAL { defval }
::= { wfOspfGeneralGroup 9 }
wfOspfSlotMask OBJECT-TYPE
SYNTAX INTEGER {
slotmask(4261150720)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
Slot mask for which slots OSPF is eligible
to run on. The MSBit represents slot 1, the
next most significant bit represents slot 2,
and so on... Slots can be 1-14.
Default is all slots on a BCN.
"
DEFVAL { slotmask }
::= { wfOspfGeneralGroup 10 }
wfOspfAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOspfAreaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
-- The OSPF Area Data Structure contains information
-- regarding the various areas. The interfaces and
-- virtual links are configured as part of these areas.
-- Area 0.0.0.0, by definition, is the Backbone Area
'Information describing the configured parameters and
cumulative statistics of the router's attached areas.'
REFERENCE
'OSPF Version 2, Section 6 The Area Data Structure'
"
::= { wellfleet 3 5 3 2 3 2 }
wfOspfAreaEntry OBJECT-TYPE
SYNTAX WfOspfAreaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
'Information describing the configured parameters and
cumulative statistics of one of the router's attached
areas.'
"
INDEX { wfOspfAreaId }
::= { wfOspfAreaTable 1 }
WfOspfAreaEntry ::= SEQUENCE {
wfOspfAreaDelete
INTEGER,
wfOspfAreaDisable
INTEGER,
wfOspfAreaState
INTEGER,
wfOspfAreaId
IpAddress,
wfOspfAuthType
INTEGER,
wfOspfImportASExtern
INTEGER,
wfOspfStubMetric
INTEGER,
wfOspfImportSum
INTEGER,
wfOspfSpfCnt
Counter
}
wfOspfAreaDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This value determines if the OSPF router is configured with
this area.
"
DEFVAL { created }
::= { wfOspfAreaEntry 1 }
wfOspfAreaDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This value indicates the state of this area on the OSPF
router.
"
DEFVAL { enabled }
::= { wfOspfAreaEntry 2 }
wfOspfAreaState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
This value indicates the state of the OSPF Area.
"
DEFVAL { down }
::= { wfOspfAreaEntry 3 }
wfOspfAreaId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'A 32-bit integer uniquely identifying an area. Area
ID 0.0.0.0 is used for the OSPF backbone.'
REFERENCE
'OSPF Version 2, Appendix C.2 Area parameters'
"
::= { wfOspfAreaEntry 4 }
wfOspfAuthType OBJECT-TYPE
SYNTAX INTEGER {
nopassword(1),
simplepassword(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The authentication type specified for an area.
Additional authentication types may be assigned locally
on a per Area basis.'
REFERENCE
'OSPF Version 2, Appendix E Authentication'
-- none (0),
-- simplePassword (1)
-- reserved for future specification (2..255)
-- reserved for AS specific values (> 255)
"
DEFVAL { nopassword }
::= { wfOspfAreaEntry 5 }
wfOspfImportASExtern OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The area's support for importing AS external link-
state advertisements.'
REFERENCE
'OSPF Version 2, Appendix C.2 Area parameters'
"
DEFVAL { true }
::= { wfOspfAreaEntry 6 }
wfOspfStubMetric OBJECT-TYPE
SYNTAX INTEGER {
minimum(1),
maximum(16777215)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The metric value applied at the indicated type of
service. By default, this equals the least metric at
the type of service among the interfaces to other
areas.'
"
DEFVAL { minimum }
::= { wfOspfAreaEntry 7 }
wfOspfImportSum OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The area's support for importing Summary
advertisements into a stub area. This variable
should not be set unless wfOspfImportASExtern is
set to FALSE'
"
DEFVAL { true }
::= { wfOspfAreaEntry 8 }
wfOspfSpfCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The number of times the OSPF SPF algorithm
has been run for this area.
"
::= { wfOspfAreaEntry 9 }
wfOspfLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOspfLsdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
-- OSPF Link State Database
-- The Link State Database contains the Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
'The OSPF Process's Links State Database.'
REFERENCE
'OSPF Version 2, Section 12 Link State Advertisements'
"
::= { wellfleet 3 5 3 2 3 3 }
wfOspfLsdbEntry OBJECT-TYPE
SYNTAX WfOspfLsdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
'A single Link State Advertisement.'
"
INDEX { wfOspfLsdbAreaId,
wfOspfLsdbType,
wfOspfLsdbLSID,
wfOspfLsdbRouterId }
::= { wfOspfLsdbTable 1 }
WfOspfLsdbEntry ::= SEQUENCE {
wfOspfLsdbAreaId
IpAddress,
wfOspfLsdbType
INTEGER,
wfOspfLsdbLSID
IpAddress,
wfOspfLsdbRouterId
IpAddress,
wfOspfLsdbSequence
INTEGER,
wfOspfLsdbAge
INTEGER,
wfOspfLsdbChecksum
INTEGER,
wfOspfLsdbAdvLen
INTEGER
}
wfOspfLsdbAreaId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The 32 bit identifier of the Area from which the LSA
was received.'
REFERENCE
'OSPF Version 2, Appendix C.2 Area parameters'
"
::= { wfOspfLsdbEntry 1 }
wfOspfLsdbType OBJECT-TYPE
SYNTAX INTEGER {
routerlink(1),
networklink(2),
summarylink(3),
assummarylink(4),
asexternallink(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The type of the link state advertisement. Each link
state type has a separate advertisement format.'
REFERENCE
'OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header'
stubLink (0),
routerLink (1),
networkLink (2),
summaryLink (3),
asSummaryLink (4),
asExternalLink (5)
"
::= { wfOspfLsdbEntry 2 }
wfOspfLsdbLSID OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address; it
identifies the piece of the routing domain that is
being described by the advertisement.'
REFERENCE
'OSPF Version 2, Section 12.1.4 Link State ID'
"
::= { wfOspfLsdbEntry 3 }
wfOspfLsdbRouterId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The 32 bit number that uniquely identifies the
originating router in the Autonomous System.'
REFERENCE
'OSPF Version 2, Appendix C.1 Global parameters'
"
::= { wfOspfLsdbEntry 4 }
wfOspfLsdbSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
'The sequence number field is a signed 32-bit integer.
It is used to detect old and duplicate link state
advertisements. The space of sequence numbers is
linearly ordered. The larger the sequence number the
more recent the advertisement.'
REFERENCE
'OSPF Version 2, Section 12.1.6 LS sequence number'
"
::= { wfOspfLsdbEntry 5 }
wfOspfLsdbAge OBJECT-TYPE
SYNTAX INTEGER {
lsdbmaxage(3600)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'This field is the age of the link state advertisement
in seconds.'
(OSPF_LSDBMINAGE = 0)
REFERENCE
'OSPF Version 2, Section 12.1.1 LS age'
"
::= { wfOspfLsdbEntry 6 }
wfOspfLsdbChecksum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'This field is the checksum of the complete contents of
the advertisement, excepting the age field. The age
field is excepted so that an advertisement's age can be
incremented without updating the checksum. The
checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred to as
the Fletcher checksum.'
REFERENCE
'OSPF Version 2, Section 12.1.7 LS checksum'
"
::= { wfOspfLsdbEntry 7 }
wfOspfLsdbAdvLen OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The length of entire Link State Advertisement, including its
header.'
REFERENCE
'OSPF Version 2, Section 12 Link State Advertisements'
"
::= { wfOspfLsdbEntry 8 }
wfOspfAreaRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOspfAreaRangeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
'A range if IP addresses specified by an IP address/IP
network mask pair. For example, class B address range
of X.X.X.X with a network mask of 255.255.0.0 includes
all IP addresses from X.X.0.0 to X.X.255.255'
REFERENCE
'OSPF Version 2, Appendix C.2 Area parameters'
"
::= { wellfleet 3 5 3 2 3 4 }
wfOspfAreaRangeEntry OBJECT-TYPE
SYNTAX WfOspfAreaRangeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
"
INDEX { wfOspfAreaRangeAreaID,
wfOspfAreaRangeNet }
::= { wfOspfAreaRangeTable 1 }
WfOspfAreaRangeEntry ::= SEQUENCE {
wfOspfAreaRangeDelete
INTEGER,
wfOspfAreaRangeDisable
INTEGER,
wfOspfAreaRangeState
INTEGER,
wfOspfAreaRangeAreaID
IpAddress,
wfOspfAreaRangeNet
IpAddress,
wfOspfAreaRangeMask
IpAddress
}
wfOspfAreaRangeDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This value determines if an Area Range has been
configured for the OSPF router.
"
DEFVAL { created }
::= { wfOspfAreaRangeEntry 1 }
wfOspfAreaRangeDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'This variable displays the status of
the entry. Setting it to 'DISBALED' has the effect of
rendering it inoperative. The internal effect (row
removal) is implementation dependent.'
"
DEFVAL { enabled }
::= { wfOspfAreaRangeEntry 2 }
wfOspfAreaRangeState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The state of the OSPF Area Range.
"
DEFVAL { down }
::= { wfOspfAreaRangeEntry 3 }
wfOspfAreaRangeAreaID OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The Area the Address Range is to be found within.'
REFERENCE
'OSPF Version 2, Appendix C.2 Area parameters'
"
::= { wfOspfAreaRangeEntry 4 }
wfOspfAreaRangeNet OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The IP Address of the Net or Subnet indicated by the
range.'
REFERENCE
'OSPF Version 2, Appendix C.2 Area parameters'
"
::= { wfOspfAreaRangeEntry 5 }
wfOspfAreaRangeMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The Subnet Mask that pertains to the Net or Subnet.'
REFERENCE
'OSPF Version 2, Appendix C.2 Area parameters'
"
::= { wfOspfAreaRangeEntry 6 }
wfOspfIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOspfIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
-- OSPF Interface Table
-- The OSPF Interface Table augments the ifTable with OSPF
-- specific information.
'The OSPF Interface Table describes the interfaces from
the viewpoint of OSPF.'
REFERENCE
'OSPF Version 2, Appendix C.3 Router interface
parameters'
"
::= { wellfleet 3 5 3 2 3 5 }
wfOspfIfEntry OBJECT-TYPE
SYNTAX WfOspfIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
'The OSPF Interface Entry describes one interface from
the viewpoint of OSPF.'
"
INDEX { wfOspfIfIpAddress,
wfOspfAddressLessIf }
::= { wfOspfIfTable 1 }
WfOspfIfEntry ::= SEQUENCE {
wfOspfIfDelete
INTEGER,
wfOspfIfDisable
INTEGER,
wfOspfIfState
INTEGER,
wfOspfIfIpAddress
IpAddress,
wfOspfAddressLessIf
INTEGER,
wfOspfIfAreaId
IpAddress,
wfOspfIfType
INTEGER,
wfOspfIfRtrPriority
INTEGER,
wfOspfIfTransitDelay
INTEGER,
wfOspfIfRetransInterval
INTEGER,
wfOspfIfHelloInterval
INTEGER,
wfOspfIfRtrDeadInterval
INTEGER,
wfOspfIfPollInterval
INTEGER,
wfOspfIfDesignatedRouter
IpAddress,
wfOspfIfBackupDesignatedRouter
IpAddress,
wfOspfIfMetricCost
INTEGER,
wfOspfIfAuthKey
OCTET STRING,
wfOspfIfTxHellos
Counter,
wfOspfIfTxDBDescripts
Counter,
wfOspfIfTxLinkStateReqs
Counter,
wfOspfIfTxLinkStateUpds
Counter,
wfOspfIfTxLinkStateAcks
Counter,
wfOspfIfRxHellos
Counter,
wfOspfIfRxDBDescripts
Counter,
wfOspfIfRxLinkStateReqs
Counter,
wfOspfIfRxLinkStateUpds
Counter,
wfOspfIfRxLinkStateAcks
Counter,
wfOspfIfDrops
Counter,
wfOspfMtuSize
INTEGER
}
wfOspfIfDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This variable determines in an OSPF Interface has been
configured on the router.
"
DEFVAL { created }
::= { wfOspfIfEntry 1 }
wfOspfIfDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The OSPF interface's administrative status. The value
'enabled' denotes that neighbor relationships may be
formed on the interface, and the interface will be
advertised as an internal route to some area. The
value 'disabled' denotes that the interface is external
to OSPF.'
"
DEFVAL { enabled }
::= { wfOspfIfEntry 2 }
wfOspfIfState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
loopback(2),
waiting(3),
pointtopoint(4),
designatedrouter(5),
backupdesignatedrouter(6),
otherdesignatedrouter(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The OSPF Interface State.'
down (1),
loopback (2),
waiting (3),
pointToPoint (4),
designatedRouter (5),
backupDesignatedRouter (6),
otherDesignatedRouter (7)
"
DEFVAL { down }
::= { wfOspfIfEntry 3 }
wfOspfIfIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The IP address of this OSPF interface.'
"
::= { wfOspfIfEntry 4 }
wfOspfAddressLessIf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'For the purpose of easing the instancing of addressed
and addressless interfaces; This variable takes the
value 0 on interfaces with IP Addresses, and the
corresponding value of ifIndex for interfaces having no
IP Address.'
"
::= { wfOspfIfEntry 5 }
wfOspfIfAreaId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone.'
default { '00000000'H } -- 0.0.0.0
"
::= { wfOspfIfEntry 6 }
wfOspfIfType OBJECT-TYPE
SYNTAX INTEGER {
broadcast(1),
nbma(2),
pointtopoint(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The OSPF interface type.
By way of a default, this field may be intuited from
the corresponding value of ifType. Broadcast LANs,
such as Ethernet and IEEE 802.5, take the value
'broadcast', X.25, Frame Relay, and similar
technologies take the value 'nbma', and links that are
definitively point to point take the value
'pointToPoint'.'
broadcast (1),
nbma (2),
pointToPoint (3)
"
::= { wfOspfIfEntry 7 }
wfOspfIfRtrPriority OBJECT-TYPE
SYNTAX INTEGER {
defval(1),
maximum(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The priority of this interface. Used in multi-access
networks, this field is used in the designated router
election algorithm. The value 0 signifies that the
router is not eligible to become the designated router
on this particular network. In the event of a tie in
this value, routers will use their router id as a tie
breaker.'
"
DEFVAL { defval }
::= { wfOspfIfEntry 8 }
wfOspfIfTransitDelay OBJECT-TYPE
SYNTAX INTEGER {
minimum(1),
maximum(3600)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The estimated number of seconds it takes to transmit a
link- state update packet over this interface.'
"
DEFVAL { minimum }
::= { wfOspfIfEntry 9 }
wfOspfIfRetransInterval OBJECT-TYPE
SYNTAX INTEGER {
minimum(1),
defval(5),
maximum(3600)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database description and link-state request packets.'
"
DEFVAL { defval }
::= { wfOspfIfEntry 10 }
wfOspfIfHelloInterval OBJECT-TYPE
SYNTAX INTEGER {
minimum(1),
defval(10),
maximum(65535)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for all routers attached to a
common network.'
"
DEFVAL { defval }
::= { wfOspfIfEntry 11 }
wfOspfIfRtrDeadInterval OBJECT-TYPE
SYNTAX INTEGER {
minimum(1),
defval(40),
maximum(2147483647)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This value must be the same for all routers
attached to a common network.'
"
DEFVAL { defval }
::= { wfOspfIfEntry 12 }
wfOspfIfPollInterval OBJECT-TYPE
SYNTAX INTEGER {
minimum(1),
defval(120),
maximum(2147483647)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The larger time interval, in seconds, between the
Hello packets sent to an inactive non-broadcast multi-
access neighbor.'
"
DEFVAL { defval }
::= { wfOspfIfEntry 13 }
wfOspfIfDesignatedRouter OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The IP Address of the Designated Router.'
default { '00000000'H } -- 0.0.0.0
"
::= { wfOspfIfEntry 14 }
wfOspfIfBackupDesignatedRouter OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The IP Address of the Backup Designated Router.'
default { '00000000'H } -- 0.0.0.0
"
::= { wfOspfIfEntry 15 }
wfOspfIfMetricCost OBJECT-TYPE
SYNTAX INTEGER {
minimum(1),
maximum(65535)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The cost of using this type of service on this
interface. The default value of the TOS 0 Metric is
10^8 / ifSpeed.
The value FFFF is distinguished to mean 'no route via
this TOS'.'
"
DEFVAL { minimum }
::= { wfOspfIfEntry 16 }
wfOspfIfAuthKey OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The Authentication Key. If the Area's Authorization
Type is simplePassword, and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
to 8 octets.
When read, ospfIfAuthKey always returns an Octet String
of length zero.'
default { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
REFERENCE
'OSPF Version 2, Section 9 The Interface Data
Structure'
"
::= { wfOspfIfEntry 17 }
wfOspfIfTxHellos OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Hello packets transmitted.
"
::= { wfOspfIfEntry 18 }
wfOspfIfTxDBDescripts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF DataBase Description packets transmitted.
"
::= { wfOspfIfEntry 19 }
wfOspfIfTxLinkStateReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Link State Request packets transmitted.
"
::= { wfOspfIfEntry 20 }
wfOspfIfTxLinkStateUpds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Link State Update packets transmitted.
"
::= { wfOspfIfEntry 21 }
wfOspfIfTxLinkStateAcks OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Link States Acknowledgements transmitted.
"
::= { wfOspfIfEntry 22 }
wfOspfIfRxHellos OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Hello packets received.
"
::= { wfOspfIfEntry 23 }
wfOspfIfRxDBDescripts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF DataBase Description packets received.
"
::= { wfOspfIfEntry 24 }
wfOspfIfRxLinkStateReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Link State Requests received.
"
::= { wfOspfIfEntry 25 }
wfOspfIfRxLinkStateUpds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Link State Updates received.
"
::= { wfOspfIfEntry 26 }
wfOspfIfRxLinkStateAcks OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Link State Acknowledgements received.
"
::= { wfOspfIfEntry 27 }
wfOspfIfDrops OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF packets dropped because of invalid information
in the packet.
"
::= { wfOspfIfEntry 28 }
wfOspfMtuSize OBJECT-TYPE
SYNTAX INTEGER {
defval(1),
min(2),
maximum(10000)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
Configure MTU size per OSPF inreface
"
DEFVAL { defval }
::= { wfOspfIfEntry 29 }
wfOspfVirtIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOspfVirtIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
-- OSPF Virtual Interface Table
-- The Virtual Interface Table describes the virtual
-- links that the OSPF Process is configured to
-- carry on.
'Information about this router's virtual interfaces.'
REFERENCE
'OSPF Version 2, Appendix C.4 Virtual link parameters'
"
::= { wellfleet 3 5 3 2 3 6 }
wfOspfVirtIfEntry OBJECT-TYPE
SYNTAX WfOspfVirtIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
'Information about a single Virtual Interface.'
"
INDEX { wfOspfVirtIfAreaID,
wfOspfVirtIfNeighbor }
::= { wfOspfVirtIfTable 1 }
WfOspfVirtIfEntry ::= SEQUENCE {
wfOspfVirtIfDelete
INTEGER,
wfOspfVirtIfDisable
INTEGER,
wfOspfVirtIfState
INTEGER,
wfOspfVirtIfAreaID
IpAddress,
wfOspfVirtIfNeighbor
IpAddress,
wfOspfVirtIfTransitDelay
INTEGER,
wfOspfVirtIfRetransInterval
INTEGER,
wfOspfVirtIfHelloInterval
INTEGER,
wfOspfVirtIfRtrDeadInterval
INTEGER,
wfOspfVirtIfAuthKey
OCTET STRING,
wfOspfVirtIfTxHellos
Counter,
wfOspfVirtIfTxDBDescripts
Counter,
wfOspfVirtIfTxLinkStateReqs
Counter,
wfOspfVirtIfTxLinkStateUpds
Counter,
wfOspfVirtIfTxLinkStateAcks
Counter,
wfOspfVirtIfRxHellos
Counter,
wfOspfVirtIfRxDBDescripts
Counter,
wfOspfVirtIfRxLinkStateReqs
Counter,
wfOspfVirtIfRxLinkStateUpds
Counter,
wfOspfVirtIfRxLinkStateAcks
Counter,
wfOspfVirtIfDrops
Counter
}
wfOspfVirtIfDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
"
DEFVAL { created }
::= { wfOspfVirtIfEntry 1 }
wfOspfVirtIfDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'This variable displays the validity or invalidity of
the entry. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect (row
removal) is implementation dependent.'
"
DEFVAL { enabled }
::= { wfOspfVirtIfEntry 2 }
wfOspfVirtIfState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
pointtopoint(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'OSPF virtual interface states.'
down (1), -- these use the same encoding
pointToPoint (4) -- as the ospfIfTable
"
DEFVAL { down }
::= { wfOspfVirtIfEntry 3 }
wfOspfVirtIfAreaID OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The Transit Area that the Virtual Link traverses. By
definition, this is not 0.0.0.0'
"
::= { wfOspfVirtIfEntry 4 }
wfOspfVirtIfNeighbor OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The Router ID of the Virtual Neighbor.'
"
::= { wfOspfVirtIfEntry 5 }
wfOspfVirtIfTransitDelay OBJECT-TYPE
SYNTAX INTEGER {
minimum(1),
maximum(3600)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The estimated number of seconds it takes to transmit a
link- state update packet over this interface.'
"
DEFVAL { minimum }
::= { wfOspfVirtIfEntry 6 }
wfOspfVirtIfRetransInterval OBJECT-TYPE
SYNTAX INTEGER {
minimum(1),
defval(5),
maximum(3600)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database description and link-state request packets.
This value should be well over the expected round-trip
time.'
"
DEFVAL { defval }
::= { wfOspfVirtIfEntry 7 }
wfOspfVirtIfHelloInterval OBJECT-TYPE
SYNTAX INTEGER {
minimum(1),
defval(15),
maximum(65535)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for the virtual neighbor.'
"
DEFVAL { defval }
::= { wfOspfVirtIfEntry 8 }
wfOspfVirtIfRtrDeadInterval OBJECT-TYPE
SYNTAX INTEGER {
minimum(1),
defval(60),
maximum(2147483647)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This value must be the same for the virtual
neighbor.'
"
DEFVAL { defval }
::= { wfOspfVirtIfEntry 9 }
wfOspfVirtIfAuthKey OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'If Authentication Type is simplePassword, the device
will left adjust and zero fill to 8 octets.
When read, ospfVifAuthKey always returns a string of
length zero.'
REFERENCE
'OSPF Version 2, Section 9 The Interface Data
Structure'
"
::= { wfOspfVirtIfEntry 10 }
wfOspfVirtIfTxHellos OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Hello packets transmitted on
Virtual Interfaces.
"
::= { wfOspfVirtIfEntry 11 }
wfOspfVirtIfTxDBDescripts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF DataBase Description packets transmitted
on Virtual Interfaces.
"
::= { wfOspfVirtIfEntry 12 }
wfOspfVirtIfTxLinkStateReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Link State Request packets transmitted
on Virtual Interfaces.
"
::= { wfOspfVirtIfEntry 13 }
wfOspfVirtIfTxLinkStateUpds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Link State Update packets transmitted
on Virtual Interfaces.
"
::= { wfOspfVirtIfEntry 14 }
wfOspfVirtIfTxLinkStateAcks OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Link State Acknowledgement packets
transmitted on Virtual Interfaces.
"
::= { wfOspfVirtIfEntry 15 }
wfOspfVirtIfRxHellos OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Hello packets received on
Virtual Interfaces.
"
::= { wfOspfVirtIfEntry 16 }
wfOspfVirtIfRxDBDescripts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF DataBase Description packets received
on Virtual Interfaces.
"
::= { wfOspfVirtIfEntry 17 }
wfOspfVirtIfRxLinkStateReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Link State Request packets recieved
on Virtual Interfaces.
"
::= { wfOspfVirtIfEntry 18 }
wfOspfVirtIfRxLinkStateUpds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Link State Update packets received
on Virtual Interfaces.
"
::= { wfOspfVirtIfEntry 19 }
wfOspfVirtIfRxLinkStateAcks OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF Link State Acknowledgement packets
received on Virtual Interfaces.
"
::= { wfOspfVirtIfEntry 20 }
wfOspfVirtIfDrops OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of OSPF packets dropped on
Virtual Interfaces.
"
::= { wfOspfVirtIfEntry 21 }
wfOspfNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOspfNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
-- OSPF Neighbor Table
-- The OSPF Neighbor Table describes all neighbors in
-- the locality of the subject router.
'A table of non-virtual neighbor information.'
REFERENCE
'OSPF Version 2, Section 10 The Neighbor Data
Structure'
"
::= { wellfleet 3 5 3 2 3 7 }
wfOspfNbrEntry OBJECT-TYPE
SYNTAX WfOspfNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
'The information regarding a single neighbor.'
REFERENCE
'OSPF Version 2, Section 10 The Neighbor Data
Structure'
"
INDEX { wfOspfNbrIpAddr,
wfOspfNbrAddressLessIndex }
::= { wfOspfNbrTable 1 }
WfOspfNbrEntry ::= SEQUENCE {
wfOspfNbrDelete
INTEGER,
wfOspfNbrDisable
INTEGER,
wfOspfNbrState
INTEGER,
wfOspfNbrIpAddr
IpAddress,
wfOspfNbrIfAddr
IpAddress,
wfOspfNbrAddressLessIndex
INTEGER,
wfOspfNbrRtrId
IpAddress,
wfOspfNbrOptions
INTEGER,
wfOspfNbrPriority
INTEGER,
wfOspfNbrEvents
Counter,
wfOspfNbrLSRetransQLen
Gauge
}
wfOspfNbrDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This variable indicates the existence of a static
OSPF neighbor.
"
DEFVAL { created }
::= { wfOspfNbrEntry 1 }
wfOspfNbrDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'This variable displays the status of
the entry. Setting it to 'DISABLED' has the effect of
rendering it inoperative. The internal effect (row
removal) is implementation dependent.'
"
DEFVAL { enabled }
::= { wfOspfNbrEntry 2 }
wfOspfNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoway(4),
exchangstart(5),
exchange(6),
loading(7),
full(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The State of the relationship with this Neighbor.'
REFERENCE
'OSPF Version 2, Section 10.1 Neighbor States'
down (1),
attempt (2),
init (3),
twoWay (4),
exchangeStart (5),
exchange (6),
loading (7),
full (8)
"
DEFVAL { down }
::= { wfOspfNbrEntry 3 }
wfOspfNbrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The IP address of this neighbor.'
"
::= { wfOspfNbrEntry 4 }
wfOspfNbrIfAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The Interface IP address for this neighbor.'
"
::= { wfOspfNbrEntry 5 }
wfOspfNbrAddressLessIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
' On an interface having an IP Address, zero. On
addressless interfaces, the corresponding value of
ifIndex in the Internet Standard MIB. On row creation,
this can be derived from the instance.'
"
::= { wfOspfNbrEntry 6 }
wfOspfNbrRtrId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'A 32-bit integer (represented as a type IpAddress)
uniquely identifying the neighboring router in the
Autonomous System.'
default { '00000000'H } -- 0.0.0.0
"
::= { wfOspfNbrEntry 7 }
wfOspfNbrOptions OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'A Bit Mask corresponding to the neighbor's options
field.
Bit 0, if set, indicates that the area accepts and
operates on external information; if zero, it is a stub
area.
Bit 1, if set, indicates that the system will operate
on Type of Service metrics other than TOS 0. If zero,
the neighbor will ignore all metrics except the TOS 0
metric.'
REFERENCE
'OSPF Version 2, Section 12.1.2 Options'
"
::= { wfOspfNbrEntry 8 }
wfOspfNbrPriority OBJECT-TYPE
SYNTAX INTEGER {
defval(1),
maximum(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
'The priority of this neighbor in the designated router
election algorithm. The value 0 signifies that the
neighbor is not eligible to become the designated
router on this particular network.'
"
DEFVAL { defval }
::= { wfOspfNbrEntry 9 }
wfOspfNbrEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The number of times this neighbor relationship has
changed state, or an error has occurred.'
"
::= { wfOspfNbrEntry 10 }
wfOspfNbrLSRetransQLen OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The current length of the retransmission queue.'
"
::= { wfOspfNbrEntry 11 }
wfOspfVirtNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOspfVirtNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
-- WFOSPF Virtual Neighbor Table
-- This table describes all virtual neighbors.
-- Since Virtual Links are configured in the
-- virtual interface table, this table is read-only.
'A table of virtual neighbor information.'
REFERENCE
'OSPF Version 2, '
"
::= { wellfleet 3 5 3 2 3 8 }
wfOspfVirtNbrEntry OBJECT-TYPE
SYNTAX WfOspfVirtNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
'Virtual neighbor information.'
REFERENCE
'OSPF Version 2, '
"
INDEX { wfOspfVirtNbrArea,
wfOspfVirtNbrRtrId }
::= { wfOspfVirtNbrTable 1 }
WfOspfVirtNbrEntry ::= SEQUENCE {
wfOspfVirtNbrArea
IpAddress,
wfOspfVirtNbrRtrId
IpAddress,
wfOspfVirtNbrIpAddr
IpAddress,
wfOspfVirtNbrOptions
INTEGER,
wfOspfVirtNbrState
INTEGER,
wfOspfVirtNbrEvents
Counter,
wfOspfVirtNbrLSRetransQLen
Gauge
}
wfOspfVirtNbrArea OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The Transit Area Identifier.'
"
::= { wfOspfVirtNbrEntry 1 }
wfOspfVirtNbrRtrId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'A 32-bit integer uniquely identifying the neighboring
router in the Autonomous System.'
"
::= { wfOspfVirtNbrEntry 2 }
wfOspfVirtNbrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The IP address this Virtual Neighbor is using.'
"
::= { wfOspfVirtNbrEntry 3 }
wfOspfVirtNbrOptions OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'A bit map corresponding to the neighbor's options
field. Thus, Bit 1, if set, indicates that the
neighbor supports Type of Service Routing; if zero, no
metrics other than TOS 0 are in use by the neighbor.'
"
::= { wfOspfVirtNbrEntry 4 }
wfOspfVirtNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoway(4),
exchangstart(5),
exchange(6),
loading(7),
full(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The state of the Virtual Neighbor Relationship.'
down (1),
attempt (2),
init (3),
twoWay (4),
exchangeStart (5),
exchange (6),
loading (7),
full (8)
"
DEFVAL { down }
::= { wfOspfVirtNbrEntry 5 }
wfOspfVirtNbrEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The number of times this virtual link has changed its
state, or an error has occurred.'
"
::= { wfOspfVirtNbrEntry 6 }
wfOspfVirtNbrLSRetransQLen OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The current length of the retransmission queue.'
"
::= { wfOspfVirtNbrEntry 7 }
wfOspfDynNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOspfDynNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
-- OSPF Dynamic Neighbor Table
-- The OSPF Dynamic Neighbor Table describes all neighbors in
-- the locality of the subject router learned during operation.
'A table of non-virtual neighbor information.'
REFERENCE
'OSPF Version 2, Section 10 The Neighbor Data
Structure'
"
::= { wellfleet 3 5 3 2 3 9 }
wfOspfDynNbrEntry OBJECT-TYPE
SYNTAX WfOspfDynNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
'The information regarding a single neighbor.'
REFERENCE
'OSPF Version 2, Section 10 The Neighbor Data
Structure'
"
INDEX { wfOspfDynNbrIpAddr,
wfOspfDynNbrAddressLessIndex }
::= { wfOspfDynNbrTable 1 }
WfOspfDynNbrEntry ::= SEQUENCE {
wfOspfDynNbrState
INTEGER,
wfOspfDynNbrIpAddr
IpAddress,
wfOspfDynNbrIfAddr
IpAddress,
wfOspfDynNbrAddressLessIndex
INTEGER,
wfOspfDynNbrRtrId
IpAddress,
wfOspfDynNbrOptions
INTEGER,
wfOspfDynNbrPriority
INTEGER,
wfOspfDynNbrEvents
Counter,
wfOspfDynNbrLSRetransQLen
Gauge
}
wfOspfDynNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoway(4),
exchangstart(5),
exchange(6),
loading(7),
full(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The State of the relationship with this Neighbor.'
REFERENCE
'OSPF Version 2, Section 10.1 Neighbor States'
down (1),
attempt (2),
init (3),
twoWay (4),
exchangeStart (5),
exchange (6),
loading (7),
full (8)
"
DEFVAL { down }
::= { wfOspfDynNbrEntry 1 }
wfOspfDynNbrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The IP address of this neighbor.'
"
::= { wfOspfDynNbrEntry 2 }
wfOspfDynNbrIfAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The Interface IP address for this neighbor.'
"
::= { wfOspfDynNbrEntry 3 }
wfOspfDynNbrAddressLessIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
' On an interface having an IP Address, zero. On
addressless interfaces, the corresponding value of
ifIndex in the Internet Standard MIB. On row creation,
this can be derived from the instance.'
"
::= { wfOspfDynNbrEntry 4 }
wfOspfDynNbrRtrId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'A 32-bit integer (represented as a type IpAddress)
uniquely identifying the neighboring router in the
Autonomous System.'
default { '00000000'H } -- 0.0.0.0
"
::= { wfOspfDynNbrEntry 5 }
wfOspfDynNbrOptions OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'A Bit Mask corresponding to the neighbor's options
field.
Bit 0, if set, indicates that the area accepts and
operates on external information; if zero, it is a stub
area.
Bit 1, if set, indicates that the system will operate
on Type of Service metrics other than TOS 0. If zero,
the neighbor will ignore all metrics except the TOS 0
metric.'
REFERENCE
'OSPF Version 2, Section 12.1.2 Options'
"
::= { wfOspfDynNbrEntry 6 }
wfOspfDynNbrPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The priority of this neighbor in the designated router
election algorithm. The value 0 signifies that the
neighbor is not eligible to become the designated
router on this particular network.'
"
::= { wfOspfDynNbrEntry 7 }
wfOspfDynNbrEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The number of times this neighbor relationship has
changed state, or an error has occurred.'
"
::= { wfOspfDynNbrEntry 8 }
wfOspfDynNbrLSRetransQLen OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
'The current length of the retransmission queue.'
"
::= { wfOspfDynNbrEntry 9 }
END