windows-nt/Source/XPSP1/NT/mergedcomponents/setupinfs/scsi.inx
2020-09-26 16:20:57 +08:00

317 lines
8.5 KiB
Plaintext

; SCSI.INF -- This file contains descriptions of all the SCSI
; Host Adapters supported in Windows NT
; Copyright (c) 1993-1997, Microsoft Corporation
[version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%Msft%
LayoutFile=layout.inf
; Class Install
[ClassInstall32.NT]
Addreg=SCSIReg
[SCSIReg]
HKR,,,,%SCSIClassName%
HKR,,Installer32,,"SysSetup.Dll,ScsiClassInstaller"
HKR,,Icon,,"-10"
HKR,,LegacyInfOption,,"SCSI"
HKR,,DeviceType,0x10001,4 ; FILE_DEVICE_CONTROLLER
HKR,,DeviceCharacteristics,0x10001,0x100 ; Use same security checks on relative opens
[DestinationDirs]
DefaultDestDir = 12 ; DIRID_DRIVERS
[Manufacturer]
%ADP%=ADAPTEC
%COMPAQ%=COMPAQ
%MYLEX%=MYLEX
%UNSUP%=UNSUP
;******************
;Adaptec Manufacturer list
[ADAPTEC]
%aha154x.DeviceDesc% = aha154x_Inst, ,DETECTED\aha154x
%sparrow.DeviceDesc% = sparrow_Inst, ,DETECTED\sparrow
;
; Aha 154x
;
[aha154x_Inst]
CopyFiles = @aha154x.sys
LogConfig = *ADP1540.LogConfig
[aha154x_Inst.Services]
AddService = aha154x, %SPSVCINST_ASSOCSERVICE%, aha154x_Service_Inst, Miniport_EventLog_Inst
[aha154x_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\aha154x.sys
LoadOrderGroup = SCSI Miniport
AddReg = pnpsafe_isa_addreg
AddReg = pnpsafe_mca_addreg
[*ADP1540.LogConfig]
ConfigPriority = HARDRECONFIG
IOConfig = 130-133(3FF::),230-233(3FF::),330-333(3FF::),134-137(3FF::),234-237(3FF::),334-337(3FF::)
IRQConfig = 9,10,11,12,14,15
DMAConfig = W:5,6,7
;
; AIC6x60 (sparrow)
;
[sparrow_Inst]
CopyFiles = @sparrow.sys
LogConfig = *ADP6360.LogConfig,6x60.lc2
[sparrow_Inst.Services]
AddService = sparrow, %SPSVCINST_ASSOCSERVICE%, sparrow_Service_Inst, Miniport_EventLog_Inst
[sparrow_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\sparrow.sys
LoadOrderGroup = SCSI Miniport
AddReg = pnpsafe_isa_addreg
[*ADP6360.LogConfig]
ConfigPriority=HARDRECONFIG
IOConfig=140-15f,340-35f
IRQConfig=9,10,11,12
[6x60.lc2]
ConfigPriority=HARDRECONFIG
IOConfig=140-15f,340-35f
IRQConfig=9,10,11,12,15
;*******************************
;Compaq Manufacturer device list
[COMPAQ]
%cpqarray.DeviceDesc% = cpqarray_Inst, ,DETECTED\cpqarray
#if (PRODSWITCH != 'w' && PRODSWITCH != 'p')
%cpqfcalm.DeviceDesc% = cpqfcalm_Inst, ,DETECTED\cpqfcalm
#endif
[cpqarray_Inst]
CopyFiles = @cpqarray.sys
[cpqarray_Inst.Services]
AddService = cpqarray, %SPSVCINST_ASSOCSERVICE%, cpqarray_Service_Inst, Miniport_EventLog_Inst
[cpqarray_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\cpqarray.sys
LoadOrderGroup = SCSI Miniport
AddReg = pnpsafe_eisa_addreg
AddReg = pnpsafe_pci_addreg
AddReg = bus_type_raid
AddReg = eisa_legacy_addreg
#if (PRODSWITCH != 'w' && PRODSWITCH != 'p')
[cpqfcalm_Inst]
CopyFiles = @cpqfcalm.sys
[cpqfcalm_Inst.Services]
AddService = cpqfcalm, %SPSVCINST_ASSOCSERVICE%, cpqfcalm_Service_Inst, Miniport_EventLog_Inst
[cpqfcalm_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\cpqfcalm.sys
LoadOrderGroup = SCSI Miniport
AddReg = pnpsafe_pci_addreg
AddReg = pnpsafe_eisa_addreg
AddReg = bus_type_fibre
AddReg = eisa_legacy_addreg
#endif
;******************************
;Mylex Manufacturer device list
[MYLEX]
%dac960.DeviceDesc% = dac960nt_Inst, ,DETECTED\dac960nt
[dac960nt_Inst]
CopyFiles = @dac960nt.sys
[dac960nt_Inst.Services]
AddService = dac960nt, %SPSVCINST_ASSOCSERVICE%, dac960nt_Service_Inst, Miniport_EventLog_Inst
[dac960nt_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\dac960nt.sys
LoadOrderGroup = SCSI Miniport
AddReg = pnpsafe_pci_addreg
AddReg = pnpsafe_eisa_addreg
AddReg = bus_type_raid
AddReg = eisa_legacy_addreg
;*************************************************************
;These addreg sections should be used when installing services to indicate
;which interface types are safe for PNP and which aren't. INTERFACE_TYPE
;is defined in NTDDK.H
[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001
[pnpsafe_isa_addreg]
HKR, "Parameters\PnpInterface", "1", 0x00010001, 0x00000001
[pnpsafe_eisa_addreg]
HKR, "Parameters\PnpInterface", "2", 0x00010001, 0x00000001
[pnpsafe_mca_addreg]
HKR, "Parameters\PnpInterface", "3", 0x00010001, 0x00000001
[pnpsafe_pcmcia_addreg]
; isa with no legacy detection
HKR, "Parameters\PnpInterface", "1", 0x00010001, 0x00000011
[pcmcia_interface_type]
HKR, "ScsiPort", "LegacyInterfaceType", 0x00010001, 0x00000008
[eisa_legacy_addreg]
HKR, "Parameters", "LegacyAdapterDetection", 0x00010001, 0x00000001
;*************************************************************
;These addreg sections should be used for non-SCSI miniports
;to indicate what STORAGE_BUS_TYPE they actually do support.
[bus_type_ide]
HKR, "Parameters", "BusType", 0x00010001, 0x00000003
[bus_type_fibre]
HKR, "Parameters", "BusType", 0x00010001, 0x00000006
[bus_type_raid]
HKR, "Parameters", "BusType", 0x00010001, 0x00000008
;*************************************************************
;The EventLog entries are the same for all SCSI miniports.
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg
[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7
;
; The UNSUP section contains entries for SCSI adapters that are no longer officially shipped
; as in-box drivers. On upgrade from a previous OS version, we do not want to block setup
; that are known to function fine, but are no longer in-box. An entry in the section below
; ensures that the drivers will not be removed by PNP.
;
[UNSUP]
%fireport.DeviceDesc% = fireport_Inst, PCI\VEN_1000&DEV_008F
%buslogic.DeviceDesc% = buslogic_Inst, BUSLOGIC_SCSI
%detected_buslogic.DeviceDesc% = buslogic_Inst, , DETECTED\buslogic
%*BUS0042.DeviceDesc% = buslogic_Inst, *BUS0042
%PCI\VEN_104B&DEV_1040.DeviceDesc% = buslogic_Inst, PCI\VEN_104B&DEV_1040
%flashpnt.DeviceDesc% = flashpnt_Inst, FLASHPNT_SCSI
%flashpnt.DeviceDesc% = flashpnt_Inst, PCI\VEN_104B&DEV_8130
%cpqfws2e.DeviceDesc% = cpqfws2e_Inst, CPQFWS2E_SCSI
%detected_cpqfws2e.DeviceDesc% = cpqfws2e_Inst, ,DETECTED\cpqfws2e
%aha2920.DeviceDesc% = fd16_700_Inst, *FDC0000
%detected_aha2920.DeviceDesc% = fd16_700_Inst, , DETECTEDPci\Fd16_700
%fd16_700.DeviceDesc% = fd16_700_Inst, FD16_700_SCSI
%FD16ISA% = fd16_700_Inst, *FDC0000
%FD16MCA% = fd16_700_Inst, *FDC0000
%FD16PCMCIANEW% = fd16_700_Inst, PCMCIA\Future_Domain_Corporation-SCSI_PCMCIA_Credit_Card_Controller-1BF8
%FD16PCI% = fd16_700_Inst, PCI\VEN_1036&DEV_0000
%detected_fd16_700.DeviceDesc% = fd16_700_Inst, , DETECTED\fd16_700
%*CPQ4410.DeviceDesc% = ncrc710_Inst, *CPQ4410
%*CPQ4411.DeviceDesc% = ncrc710_Inst, *CPQ4411
%ncrc710.DeviceDesc% = ncrc710_Inst, NCRC710_SCSI
%detected_ncrc710.DeviceDesc% = ncrc710_Inst, ,DETECTED\ncrc710
%PCI\VEN_1103&DEV_0004&SUBSYS_00051103&REV_03.DeviceDesc% = hpt3xx_Inst, PCI\VEN_1103&DEV_0004&SUBSYS_00051103&REV_03
%PCI\VEN_1103&DEV_0004&SUBSYS_00011103&REV_03.DeviceDesc% = hpt3xx_Inst, PCI\VEN_1103&DEV_0004&SUBSYS_00011103&REV_03
%PCI\VEN_1103&DEV_0004&SUBSYS_00011103&REV_04.DeviceDesc% = hpt3xx_Inst, PCI\VEN_1103&DEV_0004&SUBSYS_00011103&REV_04
;
; fireport
;
[fireport_Inst]
[fireport_Inst.Services]
[fireport_Service_Inst]
;
; buslogic
;
[buslogic_Inst]
[buslogic_Inst.Services]
[buslogic_Service_Inst]
;
; flashpnt
;
[flashpnt_Inst]
[flashpnt_Inst.Services]
[flashpnt_Service_Inst]
;
; cpqfws2e
;
[cpqfws2e_Inst]
[cpqfws2e_Inst.Services]
[cpqfws2e_Service_Inst]
;
; fd16_700
;
[fd16_700_Inst]
[fd16_700_Inst.Services]
[fd16_700_Service_Inst]
;
; ncrc710
;
[ncrc710_Inst]
[ncrc710_Inst.Services]
[ncrc710_Service_Inst]
;
; hpt3xx
;
[hpt3xx_Inst]
[hpt3xx_Inst.Services]
[hpt3xx_Service_Inst]