windows-nt/Source/XPSP1/NT/drivers/serial/ser71051/tgetset.c
2020-09-26 16:20:57 +08:00

184 lines
4.8 KiB
C

#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include "windows.h"
void main(int argc,char *argv[]) {
HANDLE hFile;
DCB MyDcb;
DCB GottenDcb;
char *MyPort = "COM1";
if (argc > 1) {
MyPort = argv[1];
}
printf("Using port %s\n",MyPort);
if ((hFile = CreateFile(
MyPort,
GENERIC_READ | GENERIC_WRITE,
0,
NULL,
CREATE_ALWAYS,
FILE_ATTRIBUTE_NORMAL,
NULL
)) != ((HANDLE)-1)) {
printf("We successfully opened the %s port.\n",MyPort);
//
// Get the state of the comm port and then
// adjust the values to our liking.
//
if (!GetCommState(
hFile,
&MyDcb
)) {
printf("Couldn't get comm state: %d\n",GetLastError());
exit(1);
} else {
//
// We immediately to a setcomm state on what we got
// back. This will test that GetCommState can *ONLY*
// return good data.
//
printf("Sanity check on GetCommState()\n");
if (!SetCommState(
hFile,
&MyDcb
)) {
printf("Bad GetCommState: %d\n",GetLastError());
exit(1);
}
printf("GetCommState is ok\n");
//
// We've successfully opened the file. Set the state of
// the comm device.
//
MyDcb.BaudRate = 19200;
MyDcb.ByteSize = 8;
MyDcb.Parity = NOPARITY;
MyDcb.StopBits = ONESTOPBIT;
MyDcb.XonChar = 20;
MyDcb.XoffChar = 25;
MyDcb.ErrorChar = 1;
MyDcb.EofChar = 2;
MyDcb.EvtChar = 3;
if (SetCommState(
hFile,
&MyDcb
)) {
printf("We successfully set the state of the %s port.\n",MyPort);
//
// Now we get the comm state again and make sure
// the adjusted values are as we like them.
//
if (!GetCommState(
hFile,
&GottenDcb
)) {
printf("Couldn't get the adjusted dcb: %d\n",GetLastError());
exit(1);
} else {
printf("Got the new state - checking\n");
if (MyDcb.BaudRate != GottenDcb.BaudRate) {
printf("MyDcb.BaudRate != GottenDcb.BaudRate: %d %d\n",MyDcb.BaudRate,GottenDcb.BaudRate);
}
if (MyDcb.ByteSize != GottenDcb.ByteSize) {
printf("MyDcb.ByteSize != GottenDcb.ByteSize: %d %d\n",MyDcb.ByteSize,GottenDcb.ByteSize);
}
if (MyDcb.Parity != GottenDcb.Parity) {
printf("MyDcb.Parity != GottenDcb.Parity: %d %d\n",MyDcb.Parity,GottenDcb.Parity);
}
if (MyDcb.StopBits != GottenDcb.StopBits) {
printf("MyDcb.StopBits != GottenDcb.StopBits: %d %d\n",MyDcb.StopBits,GottenDcb.StopBits);
}
if (MyDcb.XonChar != GottenDcb.XonChar) {
printf("MyDcb.XonChar != GottenDcb.XonChar: %d %d\n",MyDcb.XonChar,GottenDcb.XonChar);
}
if (MyDcb.XoffChar != GottenDcb.XoffChar) {
printf("MyDcb.XoffChar != GottenDcb.XoffChar: %d %d\n",MyDcb.XoffChar,GottenDcb.XoffChar);
}
if (MyDcb.ErrorChar != GottenDcb.ErrorChar) {
printf("MyDcb.ErrorChar != GottenDcb.ErrorChar: %d %d\n",MyDcb.ErrorChar,GottenDcb.ErrorChar);
}
if (MyDcb.EofChar != GottenDcb.EofChar) {
printf("MyDcb.EofChar != GottenDcb.EofChar: %d %d\n",MyDcb.EofChar,GottenDcb.EofChar);
}
if (MyDcb.EvtChar != GottenDcb.EvtChar) {
printf("MyDcb.EvtChar != GottenDcb.EvtChar: %d %d\n",MyDcb.EvtChar,GottenDcb.EvtChar);
}
}
} else {
DWORD LastError;
LastError = GetLastError();
printf("Couldn't set the %s device.\n",MyPort);
printf("Status of failed set is: %d\n",LastError);
}
}
} else {
DWORD LastError;
LastError = GetLastError();
printf("Couldn't open the %s device.\n",MyPort);
printf("Status of failed open is: %d\n",LastError);
}
}