windows-nt/Source/XPSP1/NT/net/nwlink/spx/spxerror.h
2020-09-26 16:20:57 +08:00

246 lines
6.7 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*++
Copyright (c) 1992 Microsoft Corporation
Module Name:
spxerror.h
Abstract:
This module contains some error definitions for spx.
Author:
Nikhil Kamkolkar (nikhilk@microsoft.com)
Revision History:
Notes: Tab stop: 4
--*/
// Define the modules names for SPX - use the high bits.
#define SPXDRVR 0x00010000
#define SPXREG 0x00020000
#define SPXDEV 0x00030000
#define SPXBIND 0x00040000
#define SPXRECV 0x00050000
#define SPXSEND 0x00060000
#define SPXTIMER 0x00070000
#define SPXERROR 0x00080000
#define SPXPKT 0x00090000
#define SPXUTILS 0x000a0000
#define SPXCPKT 0x000b0000
#define SPXCONN 0x000c0000
#define SPXADDR 0x000d0000
#define SPXCUTIL 0x000e0000
#define SPXINIT 0x000f0000
#define SPXMEM 0x00100000
#define SPXQUERY 0x00200000
// DEBUGGING SUPPORT:
// Debugging messages are provided per-subsystem defined here, and within
// the subsystems, there are 4 levels of messages.
//
// The four levels of debug messages are:
//
// INFO: Informational messages, eg., entry exit in routines
// DBG: Used when debugging some msgs are turned from info to dbg
// WARN: Something went wrong, but its not an error, eg., packet was not ours
// ERR: Error situations, but we can still run if a retry happens
// FATAL: In this situation, the driver is not operational
#define DBG_LEVEL_INFO 0x4000
#define DBG_LEVEL_DBG 0x5000
#define DBG_LEVEL_DBG1 0x5001
#define DBG_LEVEL_DBG2 0x5002
#define DBG_LEVEL_DBG3 0x5003
#define DBG_LEVEL_WARN 0x6000
#define DBG_LEVEL_ERR 0x7000
#define DBG_LEVEL_FATAL 0x8000
// SUBSYSTEMS
#define DBG_COMP_DEVICE 0x00000001
#define DBG_COMP_CREATE 0x00000002
#define DBG_COMP_ADDRESS 0x00000004
#define DBG_COMP_SEND 0x00000008
#define DBG_COMP_NDIS 0x00000010
#define DBG_COMP_RECEIVE 0x00000020
#define DBG_COMP_CONFIG 0x00000040
#define DBG_COMP_PACKET 0x00000080
#define DBG_COMP_RESOURCES 0x00000100
#define DBG_COMP_BIND 0x00000200
#define DBG_COMP_UNLOAD 0x00000400
#define DBG_COMP_DUMP 0x00000800
#define DBG_COMP_REFCOUNTS 0x00001000
#define DBG_COMP_SYSTEM 0x00002000
#define DBG_COMP_CRITSEC 0x00004000
#define DBG_COMP_UTILS 0x00008000
#define DBG_COMP_TDI 0x00010000
#define DBG_COMP_CONNECT 0x00020000
#define DBG_COMP_DISC 0x00040000
#define DBG_COMP_ACTION 0x00080000
#define DBG_COMP_STATE 0x00100000
#define DBG_COMP_MOST (DBG_COMP_DEVICE | \
DBG_COMP_CREATE | \
DBG_COMP_ADDRESS | \
DBG_COMP_SEND | \
DBG_COMP_NDIS | \
DBG_COMP_RECEIVE | \
DBG_COMP_CONFIG | \
DBG_COMP_PACKET | \
DBG_COMP_RESOURCES | \
DBG_COMP_BIND | \
DBG_COMP_UNLOAD | \
DBG_COMP_DUMP | \
DBG_COMP_REFCOUNTS | \
DBG_COMP_SYSTEM | \
DBG_COMP_CRITSEC | \
DBG_COMP_UTILS | \
DBG_COMP_TDI | \
DBG_COMP_CONNECT | \
DBG_COMP_DISC | \
DBG_COMP_ACTION | \
DBG_COMP_STATE)
// More debugging support. These values define the dumping components.
// There are a max of 32 such components that can be defined. Each of
// these are associated with a dump routine. It one is specified and
// enabled, periodically it is called. It is upto that component to
// decide what it wants to do
#define DBG_DUMP_DEF_INTERVAL 30 // In Seconds
// This defines the number of times an error has to happen consecutively before
// it gets logged again.
#define ERROR_CONSEQ_FREQ 200
#define ERROR_CONSEQ_TIME (60*30) // 30 minutes
#ifdef DBG
typedef VOID (*DUMP_ROUTINE)(VOID);
extern
BOOLEAN
SpxDumpComponents(
IN PVOID Context);
#endif
//
// PROTOTYPES
//
BOOLEAN
SpxFilterErrorLogEntry(
IN NTSTATUS UniqueErrorCode,
IN NTSTATUS NtStatusCode,
IN PVOID RawDataBuf OPTIONAL,
IN LONG RawDataLen);
VOID
SpxWriteResourceErrorLog(
IN PDEVICE Device,
IN ULONG BytesNeeded,
IN ULONG UniqueErrorValue);
VOID
SpxWriteGeneralErrorLog(
IN PDEVICE Device,
IN NTSTATUS ErrorCode,
IN ULONG UniqueErrorValue,
IN NTSTATUS FinalStatus,
IN PWSTR SecondString,
IN PVOID RawDataBuf OPTIONAL,
IN LONG RawDataLen);
//
// MACROS
//
#if DBG
#define LOG_ERROR(Error, NtStatus, SecondString, RawData, RawDataLen) \
{ \
SpxWriteGeneralErrorLog( \
SpxDevice, \
Error, \
FILENUM | __LINE__, \
NtStatus, \
SecondString, \
RawData, \
RawDataLen); \
}
#define RES_LOG_ERROR(BytesNeeded) \
{ \
SpxWriteResourceErrorLog( \
SpxDevice, \
BytesNeeded, \
FILENUM | __LINE__); \
}
#else
#define LOG_ERROR(Error, NtStatus, SecondString, RawData, RawDataLen) \
{ \
SpxWriteGeneralErrorLog( \
SpxDevice, \
Error, \
FILENUM | __LINE__, \
NtStatus, \
SecondString, \
RawData, \
RawDataLen); \
}
#define RES_LOG_ERROR(BytesNeeded) \
{ \
SpxWriteResourceErrorLog( \
SpxDevice, \
BytesNeeded, \
FILENUM | __LINE__); \
}
#endif
#if DBG
#define DBGPRINT(Component, Level, Fmt) \
{ \
if (((DBG_LEVEL_ ## Level) >= SpxDebugLevel) && \
(SpxDebugSystems & (DBG_COMP_ ## Component))) \
{ \
DbgPrint("SPX: "); \
DbgPrint Fmt; \
} \
}
#define DBGBRK(Level) \
{ \
if ((DBG_LEVEL_ ## Level) >= SpxDebugLevel) \
DbgBreakPoint(); \
}
#define TMPLOGERR() \
{ \
DBGPRINT(MOST, ERR, \
("TempErrLog: %s, Line %ld\n", __FILE__, __LINE__)); \
}
#else
#define DBGPRINT(Component, Level, Fmt)
#define DBGBRK(Level)
#define TMPLOGERR()
#endif
extern
VOID
SpxWriteErrorLogEntry(
IN NTSTATUS UniqueErrorCode,
IN ULONG UniqueErrorValue,
IN NTSTATUS NtStatusCode,
IN PVOID RawDataBuf OPTIONAL,
IN LONG RawDataLen);