windows-nt/Source/XPSP1/NT/mergedcomponents/setupinfs/nl/scsi.txt
2020-09-26 16:20:57 +08:00

90 lines
3.6 KiB
Plaintext

#if 0
This file is organized into two main blocks. The first block contains
code (non-string) sections which are specific to languages. Please put
the code sections in the correct language.
The second block is reserved for [Strings] which localizers will be
working with. It is further divided using "#if LANGUAGE ==" for language
specific strings. For strings which are common to all languages
place outside the #ifs.
This file is first precompiled with LANGUAGE_ID
set to the language (see inf\win4\inf\makefile.inc for details).
For example, for usa builds, the sections under #if LANGUAGE == 0x409
will appear.
Important: To support locstudio, this file contains only ONE [Strings] section.
#endif
#if LANGUAGE_ID != 0x804 && LANGUAGE_ID != 0x404 && LANGUAGE_ID != 0x411 && LANGUAGE_ID != 0x412
// This section is for non-FE (chs,cht,jpn,kor) builds. So english, german, ...
#elif LANGUAGE_ID == 0x804
//CHS specific sections
#elif LANGUAGE_ID == 0x404
//CHT specific sections
#elif LANGUAGE_ID == 0x411
//JPN specific sections
#elif LANGUAGE_ID == 0x412
//KOR specific sections
#endif
// String section below for localizers
[Strings]
#if LANGUAGE_ID != 0x804 && LANGUAGE_ID != 0x404 && LANGUAGE_ID != 0x411 && LANGUAGE_ID != 0x412
#elif LANGUAGE_ID == 0x804
#elif LANGUAGE_ID == 0x404
#elif LANGUAGE_ID == 0x411
#elif LANGUAGE_ID == 0x412
#endif
Msft = "Microsoft"
SCSIClassName="SCSI- en RAID-controllers"
ADP = "Adaptec"
aha154x.DeviceDesc = "Adaptec AHA-154X/AHA-164X SCSI Host Adapter (non-pnp)"
sparrow.DeviceDesc = "Adaptec AHA-151X/AHA-152X or AIC-6260/AIC-6360 SCSI Host Adapter (non-pnp)"
COMPAQ = "Compaq"
cpqarray.DeviceDesc = "Compaq Drive Array (non-pnp)"
cpqfcalm.DeviceDesc = "Compaq Fibre-Channel Host Controller (non-pnp)"
MYLEX = "Mylex"
dac960.DeviceDesc = "Mylex DAC960 Disk Array Controller (niet-PnP)"
UNSUP = "Niet ondersteund"
buslogic.DeviceDesc = "BusLogic SCSI Host Adapter"
*BUS0042.DeviceDesc = "BusLogic MultiMaster SCSI Host Adapter"
PCI\VEN_104B&DEV_1040.DeviceDesc = "BusLogic MultiMaster PCI SCSI Host Adapter"
flashpnt.DeviceDesc = "BusLogic FlashPoint PCI SCSI Host Adapter"
fireport.DeviceDesc = "Diamond Multimedia Systems SCSI Host Adapter"
cpqfws2e.DeviceDesc = "Compaq 32-Bit Fast-Wide SCSI-2/E Controller"
fd16_700.DeviceDesc = "Adaptec AHA-2920 or Future Domain 16XX/PCI/SCSI2Go SCSI Host Adapter"
FD16ISA = "Future Domain TMC-1650/1660/1670/1680 SCSI Host Adapter"
FD16MCA = "Future Domain MCS-600/700 SCSI Host Adapter"
FD16PCMCIANEW = "Future Domain SCSI2Go PCMCIA SCSI Host Adapter"
FD16PCI = "Future Domain PCI SCSI HOST Adapter"
aha2920.DeviceDesc = "Adaptec AHA-2920 SCSI Host Adapter"
ncrc710.DeviceDesc = "NCR 53C710 SCSI Host Adapter "
detected_buslogic.DeviceDesc = "BusLogic SCSI Host Adapter (non-pnp)"
detected_cpqfws2e.DeviceDesc = "Compaq 32-Bit Fast-Wide SCSI-2/E Controller (non-pnp)"
detected_fd16_700.DeviceDesc = "Adaptec AHA-2920 or Future Domain 16XX/PCI/SCSI2Go SCSI Host Adapter"
detected_ncrc710.DeviceDesc = "NCR 710 SCSI Host Adapter (non-pnp)"
PCI\VEN_1103&DEV_0004&SUBSYS_00051103&REV_03.DeviceDesc = "HPT370 UDMA/ATA100 RAID Controller"
PCI\VEN_1103&DEV_0004&SUBSYS_00011103&REV_03.DeviceDesc = "HPT370 UDMA/ATA100 RAID Controller"
PCI\VEN_1103&DEV_0004&SUBSYS_00011103&REV_04.DeviceDesc = "HPT370 UDMA/ATA100 RAID Controller"
;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER = 1
SERVICE_BOOT_START = 0
SERVICE_ERROR_NORMAL = 1
REG_EXPAND_SZ = 0x00020000
REG_DWORD = 0x00010001