windows-nt/Source/XPSP1/NT/shell/shell32/tngen/mffst.cpp
2020-09-26 16:20:57 +08:00

1213 lines
31 KiB
C++

#include "stdafx.h"
#pragma hdrstop
/***************************************************************************
*
* INTEL Corporation Proprietary Information
*
*
* Copyright (c) 1996 Intel Corporation.
* All rights reserved.
*
***************************************************************************
*/
/*
* jfdctfst.c
*
* Copyright (C) 1994-1996, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains a fast, not so accurate integer implementation of the
* forward DCT (Discrete Cosine Transform).
*
* A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT
* on each column. Direct algorithms are also available, but they are
* much more complex and seem not to be any faster when reduced to code.
*
* This implementation is based on Arai, Agui, and Nakajima's algorithm for
* scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in
* Japanese, but the algorithm is described in the Pennebaker & Mitchell
* JPEG textbook (see REFERENCES section in file README). The following code
* is based directly on figure 4-8 in P&M.
* While an 8-point DCT cannot be done in less than 11 multiplies, it is
* possible to arrange the computation so that many of the multiplies are
* simple scalings of the final outputs. These multiplies can then be
* folded into the multiplications or divisions by the JPEG quantization
* table entries. The AA&N method leaves only 5 multiplies and 29 adds
* to be done in the DCT itself.
* The primary disadvantage of this method is that with fixed-point math,
* accuracy is lost due to imprecise representation of the scaled
* quantization values. The smaller the quantization table entry, the less
* precise the scaled value, so this implementation does worse with high-
* quality-setting files than with low-quality ones.
*/
#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"
#include "jdct.h" /* Private declarations for DCT subsystem */
#ifdef DCT_IFAST_SUPPORTED
/*
* This module is specialized to the case DCTSIZE = 8.
*/
#if DCTSIZE != 8
Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
#endif
/* Scaling decisions are generally the same as in the LL&M algorithm;
* see jfdctint.c for more details. However, we choose to descale
* (right shift) multiplication products as soon as they are formed,
* rather than carrying additional fractional bits into subsequent additions.
* This compromises accuracy slightly, but it lets us save a few shifts.
* More importantly, 16-bit arithmetic is then adequate (for 8-bit samples)
* everywhere except in the multiplications proper; this saves a good deal
* of work on 16-bit-int machines.
*
* Again to save a few shifts, the intermediate results between pass 1 and
* pass 2 are not upscaled, but are represented only to integral precision.
*
* A final compromise is to represent the multiplicative constants to only
* 8 fractional bits, rather than 13. This saves some shifting work on some
* machines, and may also reduce the cost of multiplication (since there
* are fewer one-bits in the constants).
*/
#define CONST_BITS 8
/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
* causing a lot of useless floating-point operations at run time.
* To get around this we use the following pre-calculated constants.
* If you change CONST_BITS you may want to add appropriate values.
* (With a reasonable C compiler, you can just rely on the FIX() macro...)
*/
#if CONST_BITS == 8
#define FIX_0_382683433 98 /* FIX(0.382683433) */
#define FIX_0_541196100 139 /* FIX(0.541196100) */
#define FIX_0_707106781 181 /* FIX(0.707106781) */
#define FIX_1_306562965 334 /* FIX(1.306562965) */
#else
#define FIX_0_382683433 FIX(0.382683433)
#define FIX_0_541196100 FIX(0.541196100)
#define FIX_0_707106781 FIX(0.707106781)
#define FIX_1_306562965 FIX(1.306562965)
#endif
//The following constant is shifted left 8 for the pmulhw instruction
const __int64 Const_FIX_0_382683433 = 0x6200620062006200;
//The following constants are shifted left 7 for the pmulhw instruction
const __int64 Const_FIX_0_541196100 = 0x4580458045804580;
const __int64 Const_FIX_0_707106781 = 0x5a805a805a805a80;
//The following constant is shifted left 6 for the pmulhw instruction
const __int64 Const_FIX_1_306562965 = 0x5380538053805380;
/* We can gain a little more speed, with a further compromise in accuracy,
* by omitting the addition in a descaling shift. This yields an incorrectly
* rounded result half the time...
*/
// The assembly version makes this compromise.
//#ifndef USE_ACCURATE_ROUNDING
//#undef DESCALE
//#define DESCALE(x,n) RIGHT_SHIFT(x, n)
//#endif
#define DATASIZE 32
/* Multiply a DCTELEM variable by an INT32 constant, and immediately
* descale to yield a DCTELEM result.
*/
#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS))
/*
* Perform the forward DCT on one block of samples.
*/
GLOBAL(void)
mfdct8x8aan (DCTELEM * data)
{
__asm{
mov edi, [data]
// transpose the bottom right quadrant(4X4) of the matrix
// --------- ---------
// | M1 | M2 | | M1'| M3'|
// --------- --> ---------
// | M3 | M4 | | M2'| M4'|
// --------- ---------
// Get the 32-bit quantities and pack into 16 bits
movq mm5, [edi][DATASIZE*4+16] //| w41 | w40 |
movq mm3, [edi][DATASIZE*4+24] //| w43 | w42 |
movq mm6, [edi][DATASIZE*5+16]
packssdw mm5, mm3 //|w43|w42|w41|w40|
movq mm7, [edi][DATASIZE*5+24]
movq mm4, mm5 // copy w4---0,1,3,5,6
movq mm3, [edi][DATASIZE*6+16]
packssdw mm6, mm7
movq mm2, [edi][DATASIZE*6+24]
punpcklwd mm5, mm6 //mm6 = w5
movq mm1, [edi][DATASIZE*7+16]
packssdw mm3, mm2
movq mm0, [edi][DATASIZE*7+24]
punpckhwd mm4, mm6 //---0,1,3,5,6
packssdw mm1, mm0
movq mm7, mm3 //---0,1,2,3,5,6 w6
punpcklwd mm3, mm1 //mm1 = w7
movq mm0, mm5 //---0,2,3,4,5,6,7
movq mm2, [edi][DATASIZE*4] //| w01 | w00 |
punpckhdq mm0, mm3 // transposed w5---0,2,4,6,7
punpckhwd mm7, mm1 //---0,2,3,5,6,7
movq mm1, [edi][DATASIZE*5+8]
movq mm6, mm4 //---0,2,3,4,6,7
movq [edi][DATASIZE*5+16], mm0 // store w5
punpckldq mm5, mm3 // transposed w4
movq mm3, [edi][DATASIZE*5]
punpckldq mm4, mm7 // transposed w6
movq mm0, [edi][DATASIZE*4+8] //| w03 | w02 |
punpckhdq mm6, mm7 // transposed w7---0,3,6,7
// transpose the bottom left quadrant(4X4) of the matrix and place
// in the top right quadrant while doing the same for the top
// right quadrant
// --------- ---------
// | M1 | M2 | | M1'| M3'|
// --------- --> ---------
// | M3 | M4 | | M2'| M4'|
// --------- ---------
movq [edi][DATASIZE*4+16], mm5 // store w4
packssdw mm2, mm0 //|w03|w02|w01|w00|
movq mm5, [edi][DATASIZE*7]
packssdw mm3, mm1
movq mm0, [edi][DATASIZE*7+8]
movq [edi][DATASIZE*7+16], mm6 // store w7---5,6,7
packssdw mm5, mm0
movq mm6, [edi][DATASIZE*6]
movq mm0, mm2 // copy w0---0,1,3,5,6
movq mm7, [edi][DATASIZE*6+8]
punpcklwd mm2, mm3 //mm6 = w1
movq [edi][DATASIZE*6+16], mm4 // store w6---3,5,6,7
packssdw mm6, mm7
movq mm1, [edi][DATASIZE*0+24]
punpckhwd mm0, mm3 //---0,1,3,5,6
movq mm7, mm6 //---0,1,2,3,5,6 w2
punpcklwd mm6, mm5 //mm1 = w3
movq mm3, [edi][DATASIZE*0+16]
punpckhwd mm7, mm5 //---0,2,3,5,6,7
movq mm4, [edi][DATASIZE*2+24]
packssdw mm3, mm1
movq mm1, mm2 //---0,2,3,4,5,6,7
punpckldq mm2, mm6 // transposed w4
movq mm5, [edi][DATASIZE*2+16]
punpckhdq mm1, mm6 // transposed w5---0,2,4,6,7
movq [edi][DATASIZE*0+16], mm2 // store w4
packssdw mm5, mm4
movq mm4, [edi][DATASIZE*1+16]
movq mm6, mm0 //---0,2,3,4,6,7
movq mm2, [edi][DATASIZE*1+24]
punpckldq mm0, mm7 // transposed w6
movq [edi][DATASIZE*1+16], mm1 // store w5
punpckhdq mm6, mm7 // transposed w7---0,3,6,7
movq mm7, [edi][DATASIZE*3+24]
packssdw mm4, mm2
movq [edi][DATASIZE*2+16], mm0 // store w6---3,5,6,7
movq mm1, mm3 // copy w4---0,1,3,5,6
movq mm2, [edi][DATASIZE*3+16]
punpcklwd mm3, mm4 //mm6 = w5
movq [edi][DATASIZE*3+16], mm6 // store w7---5,6,7
packssdw mm2, mm7
// transpose the bottom left quadrant(4X4) of the matrix
// --------- ---------
// | M1 | M2 | | M1'| M3'|
// --------- --> ---------
// | M3 | M4 | | M2'| M4'|
// --------- ---------
movq mm6, [edi][DATASIZE*0] //| w01 | w00 |
punpckhwd mm1, mm4 //---0,1,3,5,6
movq mm7, mm5 //---0,1,2,3,5,6 w6
punpcklwd mm5, mm2 //mm1 = w7
movq mm4, [edi][DATASIZE*0+8] //| w03 | w02 |
punpckhwd mm7, mm2 //---0,2,3,5,6,7
movq mm0, mm3 //---0,2,3,4,5,6,7
packssdw mm6, mm4 //|w03|w02|w01|w00|
movq mm2, [edi][DATASIZE*2+8]
punpckldq mm3, mm5 // transposed w4
movq mm4, [edi][DATASIZE*1]
punpckhdq mm0, mm5 // transposed w5---0,2,4,6,7
movq [edi][DATASIZE*4], mm3 // store w4
movq mm5, mm1 //---0,2,3,4,6,7
movq mm3, [edi][DATASIZE*2]
punpckldq mm1, mm7 // transposed w6
movq [edi][DATASIZE*5], mm0 // store w5
punpckhdq mm5, mm7 // transposed w7---0,3,6,7
movq mm7, [edi][DATASIZE*1+8]
packssdw mm3, mm2
movq [edi][DATASIZE*7], mm5 // store w7---5,6,7
movq mm5, mm6 // copy w0---0,1,3,5,6
movq [edi][DATASIZE*6], mm1 // store w6---3,5,6,7
packssdw mm4, mm7
// transpose the top left quadrant(4X4) of the matrix
// --------- ---------
// | M1 | M2 | | M1'| M3'|
// --------- --> ---------
// | M3 | M4 | | M2'| M4'|
// --------- ---------
// Get the 32-bit quantities and pack into 16 bits
movq mm1, [edi][DATASIZE*3]
punpcklwd mm6, mm4 //mm6 = w1
movq mm0, [edi][DATASIZE*3+8]
punpckhwd mm5, mm4 //---0,1,3,5,6
packssdw mm1, mm0
movq mm2, mm3 //---0,1,2,3,5,6 w2
punpcklwd mm3, mm1 //mm1 = w3
movq mm0, mm6 //---0,2,3,4,5,6,7
movq mm4, [edi][DATASIZE*7]
punpckhwd mm2, mm1 //---0,2,3,5,6,7
movq mm1, [edi][DATASIZE*4]
punpckldq mm6, mm3 // transposed w4
punpckhdq mm0, mm3 // transposed w5---0,2,4,6,7
movq mm3, mm5 //---0,2,3,4,6,7
movq [edi][DATASIZE*0], mm6 // store w4
punpckldq mm5, mm2 // transposed w6
movq [edi][DATASIZE*1], mm0 // store w5
punpckhdq mm3, mm2 // transposed w7---0,3,6,7
movq [edi][DATASIZE*2], mm5 // store w6---3,5,6,7
paddw mm6, mm4 // tmp0
movq [edi][DATASIZE*3], mm3 // store w7---5,6,7
movq mm7, mm6
//******************************************************************************
// End of transpose. Begin row dct.
//******************************************************************************
// tmp0 = dataptr[0] + dataptr[7];
// tmp7 = dataptr[0] - dataptr[7];
// tmp1 = dataptr[1] + dataptr[6];
// tmp6 = dataptr[1] - dataptr[6];
// tmp2 = dataptr[2] + dataptr[5];
// tmp5 = dataptr[2] - dataptr[5];
// tmp3 = dataptr[3] + dataptr[4];
// tmp4 = dataptr[3] - dataptr[4];
paddw mm0, [edi][DATASIZE*6] // tmp1
paddw mm3, mm1 // tmp3
paddw mm5, [edi][DATASIZE*5] // tmp2
movq mm1, mm0
// tmp10 = tmp0 + tmp3;
// tmp13 = tmp0 - tmp3;
// tmp11 = tmp1 + tmp2;
// tmp12 = tmp1 - tmp2;
psubw mm7, mm3 //tmp13
psubw mm0, mm5 //tmp12
paddw mm0, mm7 //tmp12 + tmp13
paddw mm6, mm3 //tmp10
// dataptr[0] = tmp10 + tmp11; /* phase 3 */
// dataptr[4] = tmp10 - tmp11;
// z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
//NOTE: We can't write these values out immediately. Values for tmp4 - tmp7
//haven't been calculated yet!
paddw mm1, mm5 //tmp11
psllw mm0, 1
pmulhw mm0, Const_FIX_0_707106781 // z1
movq mm3, mm6
// dataptr[2] = tmp13 + z1; /* phase 5 */
// dataptr[6] = tmp13 - z1;
//NOTE: We can't write these values out immediately. Values for tmp4 - tmp7
//haven't been calculated yet!
movq mm5, [edi][DATASIZE*3]
paddw mm6, mm1 //tmp10 + tmp11
// tmp4 = dataptr[3] - dataptr[4]//
psubw mm5, [edi][DATASIZE*4] //tmp4
movq mm4, mm7
movq mm2, [edi][DATASIZE*2]
psubw mm3, mm1 //tmp10 - tmp11
psubw mm2, [edi][DATASIZE*5] //tmp5
paddw mm7, mm0 //tmp13 + z1
movq mm1, [edi][DATASIZE*1]
psubw mm4, mm0 //tmp13 - z1
// tmp10 = tmp4 + tmp5; /* phase 2 */
// tmp11 = tmp5 + tmp6;
// tmp12 = tmp6 + tmp7;
psubw mm1, [edi][DATASIZE*6] //tmp6
paddw mm5, mm2 //tmp10
movq mm0, [edi][DATASIZE*0]
paddw mm2, mm1 //tmp11
// z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */
// z11 = tmp7 + z3; /* phase 5 */
// z13 = tmp7 - z3;
psubw mm0, [edi][DATASIZE*7] //tmp7
psllw mm2, 1
movq [edi][DATASIZE*0], mm6
movq mm6, mm0
movq [edi][DATASIZE*2], mm7
movq mm7, mm5
pmulhw mm2, Const_FIX_0_707106781 //z3
paddw mm1, mm0 //tmp12
movq [edi][DATASIZE*4], mm3
psubw mm5, mm1 //tmp10 - tmp12
pmulhw mm5, Const_FIX_0_382683433 //z5
psllw mm7, 1
/* The rotator is modified from fig 4-8 to avoid extra negations. */
// z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */
// z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */
// z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */
pmulhw mm7, Const_FIX_0_541196100
psllw mm1, 2
pmulhw mm1, Const_FIX_1_306562965
psubw mm6, mm2 //z13
movq [edi][DATASIZE*6], mm4
paddw mm0, mm2 //z11
movq mm2, [edi][DATASIZE*3+16]
paddw mm7, mm5 //z2
paddw mm2, [edi][DATASIZE*4+16] // tmp3
paddw mm1, mm5 //z4
// dataptr[5] = z13 + z2; /* phase 6 */
// dataptr[3] = z13 - z2;
// dataptr[1] = z11 + z4;
// dataptr[7] = z11 - z4;
movq mm5, [edi][DATASIZE*0+16]
movq mm3, mm6
paddw mm5, [edi][DATASIZE*7+16] //tmp0
paddw mm6, mm7 //z13 + z2
psubw mm3, mm7 //z13 - z2
movq mm7, mm5
movq [edi][DATASIZE*5], mm6 //store
movq mm4, mm0
movq [edi][DATASIZE*3], mm3 //store
paddw mm0, mm1 //z11 + z4
movq mm3, [edi][DATASIZE*1+16]
psubw mm4, mm1 //z11 - z4
//******************************************************************************
// This completes 4x8 dct locations. Copy to do other 4x8.
//******************************************************************************
// tmp0 = dataptr[0] + dataptr[7];
// tmp7 = dataptr[0] - dataptr[7];
// tmp1 = dataptr[1] + dataptr[6];
// tmp6 = dataptr[1] - dataptr[6];
// tmp2 = dataptr[2] + dataptr[5];
// tmp5 = dataptr[2] - dataptr[5];
// tmp3 = dataptr[3] + dataptr[4];
// tmp4 = dataptr[3] - dataptr[4];
paddw mm3, [edi][DATASIZE*6+16] // tmp1
paddw mm5, mm2 //tmp10
movq mm1, [edi][DATASIZE*2+16]
psubw mm7, mm2 //tmp13
paddw mm1, [edi][DATASIZE*5+16] // tmp2
movq mm6, mm3
// tmp10 = tmp0 + tmp3;
// tmp13 = tmp0 - tmp3;
// tmp11 = tmp1 + tmp2;
// tmp12 = tmp1 - tmp2;
paddw mm3, mm1 //tmp11
psubw mm6, mm1 //tmp12
// dataptr[0] = tmp10 + tmp11; /* phase 3 */
// dataptr[4] = tmp10 - tmp11;
// z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
//NOTE: We can't write these values out immediately. Values for tmp4 - tmp7
//haven't been calculated yet!
movq [edi][DATASIZE*1], mm0 //store
paddw mm6, mm7 //tmp12 + tmp13
movq [edi][DATASIZE*7], mm4 //store
psllw mm6, 1
pmulhw mm6, Const_FIX_0_707106781 // z1
movq mm1, mm5
// dataptr[2] = tmp13 + z1; /* phase 5 */
// dataptr[6] = tmp13 - z1;
//NOTE: We can't write these values out immediately. Values for tmp4 - tmp7
//haven't been calculated yet!
movq mm2, [edi][DATASIZE*3+16]
paddw mm5, mm3 //tmp10 + tmp11
// tmp4 = dataptr[3] - dataptr[4]//
psubw mm2, [edi][DATASIZE*4+16] //tmp4
movq mm4, mm7
movq mm0, [edi][DATASIZE*2+16]
psubw mm1, mm3 //tmp10 - tmp11
psubw mm0, [edi][DATASIZE*5+16] //tmp5
paddw mm7, mm6 //tmp13 + z1
movq mm3, [edi][DATASIZE*1+16]
psubw mm4, mm6 //tmp13 - z1
// tmp10 = tmp4 + tmp5; /* phase 2 */
// tmp11 = tmp5 + tmp6;
// tmp12 = tmp6 + tmp7;
psubw mm3, [edi][DATASIZE*6+16] //tmp6
paddw mm2, mm0 //tmp10
movq mm6, [edi][DATASIZE*0+16]
paddw mm0, mm3 //tmp11
// z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */
// z11 = tmp7 + z3; /* phase 5 */
// z13 = tmp7 - z3;
psubw mm6, [edi][DATASIZE*7+16] //tmp7
psllw mm0, 1
movq [edi][DATASIZE*0+16], mm5
movq mm5, mm6
movq [edi][DATASIZE*2+16], mm7
movq mm7, mm2
pmulhw mm0, Const_FIX_0_707106781 //z3
paddw mm3, mm6 //tmp12
movq [edi][DATASIZE*4+16], mm1
psubw mm2, mm3 //tmp10 - tmp12
pmulhw mm2, Const_FIX_0_382683433 //z5
psllw mm7, 1
pmulhw mm7, Const_FIX_0_541196100
paddw mm6, mm0 //z11
/* The rotator is modified from fig 4-8 to avoid extra negations. */
// z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */
// z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */
// z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */
movq [edi][DATASIZE*6+16], mm4
psllw mm3, 2
pmulhw mm3, Const_FIX_1_306562965
psubw mm5, mm0 //z13
paddw mm7, mm2 //z2
movq mm1, mm5
paddw mm5, mm7 //z13 + z2
psubw mm1, mm7 //z13 - z2
movq mm7, [edi][DATASIZE*4]
paddw mm3, mm2 //z4
// dataptr[5] = z13 + z2; /* phase 6 */
// dataptr[3] = z13 - z2;
// dataptr[1] = z11 + z4;
// dataptr[7] = z11 - z4;
movq [edi][DATASIZE*5+16], mm5 //store
movq mm4, mm6
movq mm2, [edi][DATASIZE*7]
paddw mm6, mm3 //z11 + z4
movq mm5, [edi][DATASIZE*5]
psubw mm4, mm3 //z11 - z4
//******************************************************************************
//******************************************************************************
// This completes all 8x8 dct locations for the row case.
// Now transpose the data for the columns.
//******************************************************************************
// transpose the bottom left quadrant(4X4) of the matrix and place
// in the top right quadrant while doing the same for the top
// right quadrant
// --------- ---------
// | M1 | M2 | | M1'| M3'|
// --------- --> ---------
// | M3 | M4 | | M2'| M4'|
// --------- ---------
movq mm0, mm7 // copy w0---0,1,3,5,6
punpcklwd mm7, mm5 //mm6 = w1
movq mm3, [edi][DATASIZE*6]
punpckhwd mm0, mm5 //---0,1,3,5,6
movq mm5, mm3 //---0,1,2,3,5,6 w2
punpcklwd mm3, mm2 //mm1 = w3
movq [edi][DATASIZE*7+16], mm4 //store
punpckhwd mm5, mm2 //---0,2,3,5,6,7
movq mm4, mm7 //---0,2,3,4,5,6,7
punpckldq mm7, mm3 // transposed w4
movq mm2, [edi][DATASIZE*0+16]
punpckhdq mm4, mm3 // transposed w5---0,2,4,6,7
movq [edi][DATASIZE*0+16], mm7 // store w4
movq mm3, mm0 //---0,2,3,4,6,7
movq [edi][DATASIZE*1+16], mm4 // store w5
punpckldq mm0, mm5 // transposed w6
movq mm7, [edi][DATASIZE*2+16]
punpckhdq mm3, mm5 // transposed w7---0,3,6,7
movq mm5, mm2 // copy w4---0,1,3,5,6
punpcklwd mm2, mm6 //mm6 = w5
// transpose the top right quadrant(4X4) of the matrix
// --------- ---------
// | M1 | M2 | | M1'| M3'|
// --------- --> ---------
// | M3 | M4 | | M2'| M4'|
// --------- ---------
movq [edi][DATASIZE*2+16], mm0 // store w6---3,5,6,7
punpckhwd mm5, mm6 //---0,1,3,5,6
movq mm4, mm7 //---0,1,2,3,5,6 w6
punpckhwd mm7, mm1 //---0,2,3,5,6,7
movq [edi][DATASIZE*3+16], mm3 // store w7---5,6,7
movq mm0, mm2 //---0,2,3,4,5,6,7
movq mm6, [edi][DATASIZE*5+16]
punpcklwd mm4, mm1 //mm1 = w7
movq mm1, [edi][DATASIZE*4+16]
punpckldq mm0, mm4 // transposed w4
movq mm3, [edi][DATASIZE*6+16]
punpckhdq mm2, mm4 // transposed w5---0,2,4,6,7
// transpose the bottom right quadrant(4X4) of the matrix
// --------- ---------
// | M1 | M2 | | M1'| M3'|
// --------- --> ---------
// | M3 | M4 | | M2'| M4'|
// --------- ---------
movq [edi][DATASIZE*4], mm0 // store w4
movq mm4, mm5 //---0,2,3,4,6,7
movq [edi][DATASIZE*5], mm2 // store w5
punpckldq mm5, mm7 // transposed w6
movq mm2, [edi][DATASIZE*7+16]
punpckhdq mm4, mm7 // transposed w7---0,3,6,7
movq mm7, mm1 // copy w4---0,1,3,5,6
punpcklwd mm1, mm6 //mm6 = w5
movq [edi][DATASIZE*6], mm5 // store w6---3,5,6,7
punpckhwd mm7, mm6 //---0,1,3,5,6
movq mm5, mm3 //---0,1,2,3,5,6 w6
punpcklwd mm3, mm2 //mm1 = w7
movq [edi][DATASIZE*7], mm4 // store w7---5,6,7
punpckhwd mm5, mm2 //---0,2,3,5,6,7
movq mm0, [edi][DATASIZE*0]
movq mm4, mm1 //---0,2,3,4,5,6,7
movq mm6, [edi][DATASIZE*1]
punpckldq mm1, mm3 // transposed w4
punpckhdq mm4, mm3 // transposed w5---0,2,4,6,7
movq mm3, mm7 //---0,2,3,4,6,7
movq [edi][DATASIZE*4+16], mm1 // store w4
punpckldq mm7, mm5 // transposed w6
movq [edi][DATASIZE*5+16], mm4 // store w5
punpckhdq mm3, mm5 // transposed w7---0,3,6,7
// transpose the top left quadrant(4X4) of the matrix
// --------- ---------
// | M1 | M2 | | M1'| M3'|
// --------- --> ---------
// | M3 | M4 | | M2'| M4'|
// --------- ---------
movq mm1, [edi][DATASIZE*3]
movq mm2, mm0 // copy w0---0,1,3,5,6
movq [edi][DATASIZE*7+16], mm3 // store w7---5,6,7
punpcklwd mm0, mm6 //mm6 = w1
movq mm3, [edi][DATASIZE*2]
punpckhwd mm2, mm6 //---0,1,3,5,6
movq mm5, mm3 //---0,1,2,3,5,6 w2
punpcklwd mm3, mm1 //mm1 = w3
movq [edi][DATASIZE*6+16], mm7 // store w6---3,5,6,7
punpckhwd mm5, mm1 //---0,2,3,5,6,7
movq mm1, mm0 //---0,2,3,4,5,6,7
punpckldq mm0, mm3 // transposed w4
movq mm6, [edi][DATASIZE*4]
punpckhdq mm1, mm3 // transposed w5---0,2,4,6,7
movq [edi][DATASIZE*0], mm0 // store w4
movq mm3, mm2 //---0,2,3,4,6,7
paddw mm0, [edi][DATASIZE*7] // tmp0
punpckhdq mm3, mm5 // transposed w7---0,3,6,7
movq [edi][DATASIZE*1], mm1 // store w5
punpckldq mm2, mm5 // transposed w6
//******************************************************************************
// This begins the column dct
//******************************************************************************
// tmp0 = dataptr[0] + dataptr[7];
// tmp7 = dataptr[0] - dataptr[7];
// tmp1 = dataptr[1] + dataptr[6];
// tmp6 = dataptr[1] - dataptr[6];
// tmp2 = dataptr[2] + dataptr[5];
// tmp5 = dataptr[2] - dataptr[5];
// tmp3 = dataptr[3] + dataptr[4];
// tmp4 = dataptr[3] - dataptr[4];
movq [edi][DATASIZE*3], mm3 // store w7---5,6,7
movq mm7, mm0
paddw mm1, [edi][DATASIZE*6] // tmp1
paddw mm3, mm6 // tmp3
movq [edi][DATASIZE*2], mm2 // store w6---3,5,6,7
paddw mm0, mm3 //tmp10
paddw mm2, [edi][DATASIZE*5] // tmp2
movq mm6, mm1
// tmp10 = tmp0 + tmp3;
// tmp13 = tmp0 - tmp3;
// tmp11 = tmp1 + tmp2;
// tmp12 = tmp1 - tmp2;
psubw mm7, mm3 //tmp13
movq mm3, mm0
movq mm5, [edi][DATASIZE*2]
paddw mm1, mm2 //tmp11
psubw mm3, mm1 //tmp10 - tmp11
paddw mm0, mm1 //tmp10 + tmp11
// dataptr[0] = tmp10 + tmp11; /* phase 3 */
// dataptr[4] = tmp10 - tmp11;
//NOTE: We can't write these values out immediately. Values for tmp4 - tmp7
//haven't been calculated yet!
movq mm1, mm3
punpcklwd mm3, mm3
psubw mm6, mm2 //tmp12
punpckhwd mm1, mm1
movq mm2, [edi][DATASIZE*3]
psrad mm3, 16
// tmp4 = dataptr[3] - dataptr[4]//
psubw mm2, [edi][DATASIZE*4] //tmp4
psrad mm1, 16
movq [edi][DATASIZE*4], mm3
movq mm3, mm0
movq [edi][DATASIZE*4+8], mm1
punpcklwd mm0, mm0
paddw mm6, mm7 //tmp12 + tmp13
punpckhwd mm3, mm3
movq mm1, [edi][DATASIZE*1]
psllw mm6, 1
pmulhw mm6, Const_FIX_0_707106781 // z1
psrad mm3, 16
psubw mm5, [edi][DATASIZE*5] //tmp5
psrad mm0, 16
// z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
// dataptr[2] = tmp13 + z1; /* phase 5 */
// dataptr[6] = tmp13 - z1;
//NOTE: We can't write these values out immediately. Values for tmp4 - tmp7
//haven't been calculated yet!
movq [edi][DATASIZE*0+8], mm3
movq mm4, mm7
movq mm3, [edi][DATASIZE*0]
paddw mm7, mm6 //tmp13 + z1
movq [edi][DATASIZE*0], mm0
psubw mm4, mm6 //tmp13 - z1
movq mm0, mm7
punpcklwd mm7, mm7
psubw mm1, [edi][DATASIZE*6] //tmp6
punpckhwd mm0, mm0
// tmp10 = tmp4 + tmp5; /* phase 2 */
// tmp11 = tmp5 + tmp6;
// tmp12 = tmp6 + tmp7;
psrad mm7, 16
paddw mm2, mm5 //tmp10
psrad mm0, 16
paddw mm5, mm1 //tmp11
movq mm6, mm4
punpcklwd mm4, mm4
movq [edi][DATASIZE*2], mm7
punpckhwd mm6, mm6
psubw mm3, [edi][DATASIZE*7] //tmp7
movq mm7, mm2
// z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */
// z11 = tmp7 + z3; /* phase 5 */
// z13 = tmp7 - z3;
movq [edi][DATASIZE*2+8], mm0
movq mm0, mm3
psllw mm5, 1
paddw mm1, mm3 //tmp12
pmulhw mm5, Const_FIX_0_707106781 //z3
psrad mm4, 16
psubw mm2, mm1 //tmp10 - tmp12
psrad mm6, 16
/* The rotator is modified from fig 4-8 to avoid extra negations. */
// z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */
// z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */
// z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */
pmulhw mm2, Const_FIX_0_382683433 //z5
psllw mm7, 1
pmulhw mm7, Const_FIX_0_541196100
psllw mm1, 2
pmulhw mm1, Const_FIX_1_306562965
psubw mm0, mm5 //z13
movq [edi][DATASIZE*6+8], mm6
movq mm6, mm0
movq [edi][DATASIZE*6], mm4
paddw mm7, mm2 //z2
// dataptr[5] = z13 + z2; /* phase 6 */
// dataptr[3] = z13 - z2;
// dataptr[1] = z11 + z4;
// dataptr[7] = z11 - z4;
paddw mm0, mm7 //z13 + z2
psubw mm6, mm7 //z13 - z2
movq mm7, mm6
punpcklwd mm6, mm6
punpckhwd mm7, mm7
paddw mm3, mm5 //z11
movq mm5, mm0
punpcklwd mm0, mm0
psrad mm6, 16
movq mm4, mm3
psrad mm7, 16
paddw mm1, mm2 //z4
punpckhwd mm5, mm5
paddw mm3, mm1 //z11 + z4
psrad mm0, 16
psubw mm4, mm1 //z11 - z4
movq [edi][DATASIZE*3], mm6 //store
psrad mm5, 16
movq mm6, [edi][DATASIZE*1+16]
movq mm1, mm3
paddw mm6, [edi][DATASIZE*6+16] // tmp1
punpcklwd mm3, mm3
movq [edi][DATASIZE*3+8], mm7
punpckhwd mm1, mm1
movq [edi][DATASIZE*5], mm0 //store
psrad mm3, 16
movq [edi][DATASIZE*5+8], mm5
psrad mm1, 16
movq mm0, [edi][DATASIZE*0+16]
movq mm7, mm4
paddw mm0, [edi][DATASIZE*7+16] //tmp0
punpcklwd mm4, mm4
movq [edi][DATASIZE*1], mm3 //store
punpckhwd mm7, mm7
movq [edi][DATASIZE*1+8], mm1
psrad mm4, 16
movq mm3, [edi][DATASIZE*3+16]
psrad mm7, 16
//******************************************************************************
// This completes 4x8 dct locations. Copy to do other 4x8.
//******************************************************************************
// tmp0 = dataptr[0] + dataptr[7];
// tmp7 = dataptr[0] - dataptr[7];
// tmp1 = dataptr[1] + dataptr[6];
// tmp6 = dataptr[1] - dataptr[6];
// tmp2 = dataptr[2] + dataptr[5];
// tmp5 = dataptr[2] - dataptr[5];
// tmp3 = dataptr[3] + dataptr[4];
// tmp4 = dataptr[3] - dataptr[4];
paddw mm3, [edi][DATASIZE*4+16] // tmp3
movq mm1, mm6
movq [edi][DATASIZE*7+8], mm7
movq mm7, mm0
movq mm2, [edi][DATASIZE*2+16]
paddw mm0, mm3 //tmp10
paddw mm2, [edi][DATASIZE*5+16] // tmp2
psubw mm7, mm3 //tmp13
movq mm3, mm0
paddw mm1, mm2 //tmp11
// tmp10 = tmp0 + tmp3;
// tmp13 = tmp0 - tmp3;
// tmp11 = tmp1 + tmp2;
// tmp12 = tmp1 - tmp2;
paddw mm0, mm1 //tmp10 + tmp11
psubw mm3, mm1 //tmp10 - tmp11
// dataptr[0] = tmp10 + tmp11; /* phase 3 */
// dataptr[4] = tmp10 - tmp11;
// z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
//NOTE: We can't write these values out immediately. Values for tmp4 - tmp7
//haven't been calculated yet!
movq mm1, mm3
punpcklwd mm3, mm3
punpckhwd mm1, mm1
psubw mm6, mm2 //tmp12
movq [edi][DATASIZE*7], mm4 //store
psrad mm3, 16
psrad mm1, 16
paddw mm6, mm7 //tmp12 + tmp13
movq mm2, [edi][DATASIZE*3+16]
psllw mm6, 1
movq mm4, mm0
punpcklwd mm0, mm0
pmulhw mm6, Const_FIX_0_707106781 // z1
punpckhwd mm4, mm4
// tmp4 = dataptr[3] - dataptr[4]//
psubw mm2, [edi][DATASIZE*4+16] //tmp4
psrad mm4, 16
movq mm5, [edi][DATASIZE*2+16]
psrad mm0, 16
movq [edi][DATASIZE*0+24], mm4
movq mm4, mm7
// dataptr[2] = tmp13 + z1; /* phase 5 */
// dataptr[6] = tmp13 - z1;
//NOTE: We can't write these values out immediately. Values for tmp4 - tmp7
//haven't been calculated yet!
psubw mm5, [edi][DATASIZE*5+16] //tmp5
paddw mm7, mm6 //tmp13 + z1
movq [edi][DATASIZE*4+16], mm3
psubw mm4, mm6 //tmp13 - z1
movq mm3, mm7
punpcklwd mm7, mm7
movq mm6, [edi][DATASIZE*0+16]
punpckhwd mm3, mm3
movq [edi][DATASIZE*4+24], mm1
psrad mm7, 16
movq [edi][DATASIZE*0+16], mm0
psrad mm3, 16
movq mm1, [edi][DATASIZE*1+16]
movq mm0, mm4
psubw mm1, [edi][DATASIZE*6+16] //tmp6
punpcklwd mm4, mm4
movq [edi][DATASIZE*2+16], mm7
paddw mm2, mm5 //tmp10
// tmp10 = tmp4 + tmp5; /* phase 2 */
// tmp11 = tmp5 + tmp6;
// tmp12 = tmp6 + tmp7;
movq mm7, mm2
paddw mm5, mm1 //tmp11
psubw mm6, [edi][DATASIZE*7+16] //tmp7
punpckhwd mm0, mm0
movq [edi][DATASIZE*2+24], mm3
psllw mm5, 1
pmulhw mm5, Const_FIX_0_707106781 //z3
psrad mm0, 16
psrad mm4, 16
paddw mm1, mm6 //tmp12
// z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */
// z11 = tmp7 + z3; /* phase 5 */
// z13 = tmp7 - z3;
movq [edi][DATASIZE*6+24], mm0
psubw mm2, mm1 //tmp10 - tmp12
/* The rotator is modified from fig 4-8 to avoid extra negations. */
// z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */
// z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */
// z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */
pmulhw mm2, Const_FIX_0_382683433 //z5
psllw mm7, 1
pmulhw mm7, Const_FIX_0_541196100
psllw mm1, 2
movq [edi][DATASIZE*6+16], mm4
movq mm0, mm6
pmulhw mm1, Const_FIX_1_306562965
psubw mm0, mm5 //z13
paddw mm7, mm2 //z2
movq mm3, mm0
// dataptr[5] = z13 + z2; /* phase 6 */
// dataptr[3] = z13 - z2;
// dataptr[1] = z11 + z4;
// dataptr[7] = z11 - z4;
paddw mm0, mm7 //z13 + z2
psubw mm3, mm7 //z13 - z2
movq mm7, mm3
punpcklwd mm3, mm3
punpckhwd mm7, mm7
paddw mm6, mm5 //z11
psrad mm3, 16
paddw mm1, mm2 //z4
psrad mm7, 16
movq mm4, mm6
movq mm5, mm0
punpcklwd mm0, mm0
punpckhwd mm5, mm5
paddw mm6, mm1 //z11 + z4
psrad mm0, 16
psubw mm4, mm1 //z11 - z4
movq [edi][DATASIZE*3+16], mm3 //store
psrad mm5, 16
movq mm1, mm6
punpcklwd mm6, mm6
movq [edi][DATASIZE*3+24], mm7
punpckhwd mm1, mm1
movq [edi][DATASIZE*5+16], mm0 //store
psrad mm6, 16
movq [edi][DATASIZE*5+24], mm5
psrad mm1, 16
movq mm7, mm4
punpcklwd mm4, mm4
movq [edi][DATASIZE*1+16], mm6 //store
punpckhwd mm7, mm7
movq [edi][DATASIZE*1+24], mm1
psrad mm4, 16
psrad mm7, 16
movq [edi][DATASIZE*7+16], mm4 //store
movq [edi][DATASIZE*7+24], mm7
//******************************************************************************
// This completes all 8x8 dct locations for the column case.
//******************************************************************************
emms
}
}
#endif /* DCT_ISLOW_SUPPORTED */