windows-nt/Source/XPSP1/NT/base/tools/pperf/dll/p5ctrnam.h
2020-09-26 16:20:57 +08:00

134 lines
5.8 KiB
C

//
// p5ctrnm.h
//
// Offset definition file for exensible counter objects and counters
//
// These "relative" offsets must start at 0 and be multiples of 2 (i.e.
// even numbers). In the Open Procedure, they will be added to the
// "First Counter" and "First Help" values fo the device they belong to,
// in order to determine the absolute location of the counter and
// object names and corresponding help text in the registry.
//
// this file is used by the extensible counter DLL code as well as the
// counter name and help text definition file (.INI) file that is used
// by LODCTR to load the names into the registry.
//
#define PENTIUM 0
#define DATA_READ 2
#define DATA_WRITE 4
#define DATA_TLB_MISS 6
#define DATA_READ_MISS 8
#define DATA_WRITE_MISS 10
#define WRITE_HIT_TO_ME_LINE 12
#define DATA_CACHE_LINE_WB 14
#define DATA_CACHE_SNOOPS 16
#define DATA_CACHE_SNOOP_HITS 18
#define MEMORY_ACCESSES_IN_PIPES 20
#define BANK_CONFLICTS 22
#define MISADLIGNED_DATA_REF 24
#define CODE_READ 26
#define CODE_TLB_MISS 28
#define CODE_CACHE_MISS 30
#define SEGMENT_LOADS 32
#define BRANCHES 38
#define BTB_HITS 40
#define TAKEN_BRANCH_OR_BTB_HITS 42
#define PIPELINE_FLUSHES 44
#define INSTRUCTIONS_EXECUTED 46
#define INSTRUCTIONS_EXECUTED_IN_VPIPE 48
#define BUS_UTILIZATION 50
#define PIPE_STALLED_ON_WRITES 52
#define PIPE_STALLED_ON_READ 54
#define STALLED_WHILE_EWBE 56
#define LOCKED_BUS_CYCLE 58
#define IO_RW_CYCLE 60
#define NON_CACHED_MEMORY_REF 62
#define PIPE_STALLED_ON_ADDR_GEN 64
#define FLOPS 70
#define DR0 72
#define DR1 74
#define DR2 76
#define DR3 78
#define INTERRUPTS 80
#define DATA_RW 82
#define DATA_RW_MISS 84
#define PCT_DATA_READ_MISS 86
#define PCT_DATA_WRITE_MISS 88
#define PCT_DATA_RW_MISS 90
#define PCT_DATA_TLB_MISS 92
#define PCT_DATA_SNOOP_HITS 94
#define PCT_CODE_READ_MISS 96
#define PCT_CODE_TLB_MISS 98
#define PCT_SEGMENT_CACHE_HITS 100
#define PCT_BTB_HITS 102
#define PCT_VPIPE_INST 104
#define PCT_BRANCHES 106
#define P6_LD_BLOCKS 108
#define P6_SB_DRAINS 110
#define P6_MISALIGN_MEM_REF 112
#define P6_SEGMENT_REG_LOADS 114
#define P6_FP_COMP_OPS_EXE 116
#define P6_FP_ASSIST 118
#define P6_MUL 120
#define P6_DIV 122
#define P6_CYCLES_DIV_BUSY 124
#define P6_L2_ADS 126
#define P6_L2_DBUS_BUSY 128
#define P6_L2_DBUS_BUSY_RD 130
#define P6_L2_LINES_IN 132
#define P6_L2_M_LINES_IN 134
#define P6_L2_LINES_OUT 136
#define P6_L2_M_LINES_OUT 138
#define P6_L2_IFETCH 140
#define P6_L2_LD 142
#define P6_L2_ST 144
#define P6_L2_RQSTS 146
#define P6_DATA_MEM_REFS 148
#define P6_DCU_LINES_IN 150
#define P6_DCU_M_LINES_IN 152
#define P6_DCU_M_LINES_OUT 154
#define P6_DCU_MISS_OUTSTANDING 156
#define P6_BUS_REQ_OUTSTANDING 158
#define P6_BUS_BNR_DRV 160
#define P6_BUS_DRDY_CLOCKS 162
#define P6_BUS_LOCK_CLOCKS 164
#define P6_BUS_DATA_RCV 166
#define P6_BUS_TRANS_BRD 168
#define P6_BUS_TRANS_RFO 170
#define P6_BUS_TRANS_WB 172
#define P6_BUS_TRANS_IFETCH 174
#define P6_BUS_TRANS_INVAL 176
#define P6_BUS_TRANS_PWR 178
#define P6_BUS_TRANS_P 180
#define P6_BUS_TRANS_IO 182
#define P6_BUS_TRANS_DEF 184
#define P6_BUS_TRANS_BURST 186
#define P6_BUS_TRANS_MEM 188
#define P6_BUS_TRANS_ANY 190
#define P6_CPU_CLK_UNHALTED 192
#define P6_BUS_HIT_DRV 194
#define P6_BUS_HITM_DRV 196
#define P6_BUS_SNOOP_STALL 198
#define P6_IFU_IFETCH 200
#define P6_IFU_IFETCH_MISS 202
#define P6_ITLB_MISS 204
#define P6_IFU_MEM_STALL 206
#define P6_ILD_STALL 208
#define P6_RESOURCE_STALLS 210
#define P6_INST_RETIRED 212
#define P6_FLOPS 214
#define P6_UOPS_RETIRED 216
#define P6_BR_INST_RETIRED 218
#define P6_BR_MISS_PRED_RETIRED 220
#define P6_CYCLES_INT_MASKED 222
#define P6_CYCLES_INT_PENDING_AND_MASKED 224
#define P6_HW_INT_RX 226
#define P6_BR_TAKEN_RETIRED 228
#define P6_BR_MISS_PRED_TAKEN_RET 230
#define P6_INST_DECODED 232
#define P6_PARTIAL_RAT_STALLS 234
#define P6_BR_INST_DECODED 236
#define P6_BTB_MISSES 238
#define P6_BR_BOGUS 240
#define P6_BACLEARS 242