1
0
Fork 0
forked from koniifer/ableos
ableos-framebuffer/spec.md
2023-10-22 18:36:32 +02:00

467 lines
13 KiB
Markdown

# HoleyBytes ISA Specification
# Bytecode format
- Image format is not specified, though ELF is recommended
- All numbers are encoded little-endian
- There is 256 registers, they are represented by a byte
- Immediate values are 8, 16, 32 or 64 bit
## Instruction encoding
- Instruction operands are packed (no alignment)
- [opcode, operand 0, operand 1, …]
## Instruction parameter types
- `R`: Register (8 bits)
- Relative program-counter offset immediates:
- `O`: 32 bit (Si32)
- `P`: 16 bit (Si16)
- Immediates:
- `B`: Byte, 8 bit (Xi8)
- `H`: Half-word, 16 bit (Xi16)
- `W`: Word, 32 bit (Xi32)
- `D`: Double-word, 64 bit (Xi64)
- `A`: Absolute address immediate, 64 bit (Ui64)
## Types
- Si*n*: Signed integer of size *n* bits (Si8, Si16, Si32, Si64)
- Ui*n*: Unsigned integer of size *n* bits (Ui8, Ui16, Ui32, Ui64)
- Xi*n*: Sign-agnostic integer of size *n* bits (Xi8, Xi16, Xi32, Xi64)
- Fl*n*: Floating point number of size *n* bits (Fl32, Fl64)
# Behaviour
- Integer operations are wrapping, including signed numbers
- Bitshifts are truncating
- Two's complement
- Floats as specified by IEEE 754
- Execution model is implementation defined as long all observable
effects are performed in correct order
## Relative addressing
Relative addresses are computed from address of the first byte
of offset in the code. Not from the beginning of current or following instruction.
## Zero register
- Register 0
- Cannot be clobbered
- Write is no-op
- Load always yields 0
## Rounding modes
| Rounding mode | Value |
|:-------------------------|:------|
| To nearest, ties to even | 0b00 |
| Towards 0 (truncate) | 0b01 |
| Towards +∞ (up) | 0b10 |
| Towards -∞ (down) | 0b11 |
- Remaining values in the byte traps with invalid operand exception
# Memory
- Memory implementation is implementation-defined
- Zero address (`0x0`) is considered invalid
# Traps
- Environment call
- Environment breakpoint
Program counter goes to the following instruction
## Exceptions
- Memory access fault
- Invalid operand
- Unknown opcode
Program counter stays on the currently executed instruction
# Instructions
- `#n`: register in parameter *n*
- `$n`: for immediate in parameter *n*
- `#P ← V`: Set register P to value V
- `[x]`: Address x
- `XY`: X bytes from location Y
- `pc`: Program counter
- `<XYZ>`: Placeholder
- `Type(X)`: Cast
## Program execution control
- Type `N`
| Opcode | Mnemonic | Action |
|:-------|:---------|:--------------------------------------------|
| 0x00 | UN | Throw unreachable code exception |
| 0x01 | TX | Terminate execution (eg. on end of program) |
| 0x02 | NOP | Do nothing |
## Binary register-immediate ops
- Type `RR<IMM>`
- Action: `#0 ← #1 <OP> #2`
## Addition (`+`)
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x03 | ADD8 | Xi8 |
| 0x04 | ADD16 | Xi16 |
| 0x05 | ADD32 | Xi32 |
| 0x06 | ADD64 | Xi64 |
## Subtraction (`-`)
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x07 | SUB8 | Xi8 |
| 0x08 | SUB16 | Xi16 |
| 0x09 | SUB32 | Xi32 |
| 0x0A | SUB64 | Xi64 |
## Multiplication (`*`)
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x0B | MUL8 | Xi8 |
| 0x0C | MUL16 | Xi16 |
| 0x0D | MUL32 | Xi32 |
| 0x0E | MUL64 | Xi64 |
## Bitwise ops (type: Xi64)
| Opcode | Mnemonic | Operation |
|:-------|:---------|:--------------------|
| 0x0F | AND | Conjunction (&) |
| 0x10 | OR | Disjunction (\|) |
| 0x11 | XOR | Non-equivalence (^) |
## Unsigned left bitshift (`<<`)
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x12 | SLU8 | Ui8 |
| 0x13 | SLU16 | Ui16 |
| 0x14 | SLU32 | Ui32 |
| 0x15 | SLU64 | Ui64 |
## Unsigned right bitshift (`>>`)
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x16 | SRU8 | Ui8 |
| 0x17 | SRU16 | Ui16 |
| 0x18 | SRU32 | Ui32 |
| 0x19 | SRU64 | Ui64 |
## Signed right bitshift (`>>`)
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x1A | SRS8 | Si8 |
| 0x1B | SRS16 | Si16 |
| 0x1C | SRS32 | Si32 |
| 0x1D | SRS64 | Si64 |
## Comparsion
- Compares two numbers, saves result to register
- Operation: `#0 ← #1 <=> #2`
| Ordering | Number |
|:---------|:-------|
| < | -1 |
| = | 0 |
| > | 1 |
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x1E | CMPU | Ui64 |
| 0x1F | CMPS | Si64 |
# Merged divide-remainder
- Type `RRRR`
- Operation:
- `#0 ← #2 / #3`
- `#1 ← #2 % #3`
- If dividing by zero:
- `#0 ← Ui64(-1)`
- `#1 ← #2`
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x20 | DIRU8 | Ui8 |
| 0x21 | DIRU16 | Ui16 |
| 0x22 | DIRU32 | Ui32 |
| 0x23 | DIRU64 | Ui64 |
| 0x24 | DIRS8 | Si8 |
| 0x25 | DIRS16 | Si16 |
| 0x26 | DIRS32 | Si32 |
| 0x27 | DIRS64 | Si64 |
# Unary register operations (type: Xi64)
- Type: `RR`
- Operation: `#0 ← <OP> #1`
| Opcode | Mnemonic | Operation |
|:-------|:---------|:-------------------------|
| 0x28 | NEG | Bitwise complement (`~`) |
| 0x29 | NOT | Logical negation (`!`) |
## Sign extensions
- Operation: `#0 ← Si64(#1)`
| Opcode | Mnemonic | Source type |
|:-------|:---------|:------------|
| 0x2A | SXT8 | Si8 |
| 0x2B | SXT16 | Si16 |
| 0x2C | SXT32 | Si32 |
# Binary register-immediate operations
- Type: `RR<IMM>`
- Operation: `#0 ← #1 <OP> $2`
## Addition (`+`)
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x2D | ADDI8 | Xi8 |
| 0x2E | ADDI16 | Xi16 |
| 0x2F | ADDI32 | Xi32 |
| 0x30 | ADDI64 | Xi64 |
## Multiplication (`*`)
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x31 | MULI8 | Xi8 |
| 0x32 | MULI16 | Xi16 |
| 0x33 | MULI32 | Xi32 |
| 0x34 | MULI64 | Xi64 |
## Bitwise ops (type: Xi64)
| Opcode | Mnemonic | Operation |
|:-------|:---------|:--------------------|
| 0x35 | ANDI | Conjunction (&) |
| 0x36 | ORI | Disjunction (\|) |
| 0x37 | XORI | Non-equivalence (^) |
# Register-immediate bitshifts
- Type: `RRB`
- Operation: `#0 ← #1 <OP> $2`
## Unsigned left bitshift (`<<`)
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x38 | SLUI8 | Ui8 |
| 0x39 | SLUI16 | Ui16 |
| 0x3A | SLUI32 | Ui32 |
| 0x3B | SLUI64 | Ui64 |
## Unsigned right bitshift (`>>`)
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x3C | SRUI8 | Ui8 |
| 0x3D | SRUI16 | Ui16 |
| 0x3E | SRUI32 | Ui32 |
| 0x3F | SRUI64 | Ui64 |
## Signed right bitshift (`>>`)
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x40 | SRSI8 | Si8 |
| 0x41 | SRSI16 | Si16 |
| 0x42 | SRSI32 | Si32 |
| 0x43 | SRSI64 | Si64 |
## Comparsion
- Compares two numbers, saves result to register
- Operation: `#0 ← #1 <=> $2`
- Comparsion table same for register-register one
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x44 | CMPUI | Ui64 |
| 0x45 | CMPSI | Si64 |
# Register copies
- Type: `RR`
| Opcode | Mnemonic | Operation |
|:-------|:---------|:---------------------------------|
| 0x46 | CP | Copy register value (`#0 ← #1`) |
| 0x47 | SWA | Swap register values (`#0#1`) |
# Load immediate
- Load immediate value from code to register
- Type: `R<IMM>`
- Operation: `#0 ← $1`
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x48 | LI8 | Xi8 |
| 0x49 | LI16 | Xi16 |
| 0x4A | Li32 | Xi32 |
| 0x4B | Li64 | Xi64 |
# Load relative address
- Compute value from program counter, register value and offset
- Type: `RRO`
- Operation: `#0 ← pc + #1 + $2`
| Opcode | Mnemonic |
|:-------|:---------|
| 0x4C | LRA |
# Memory access operations
- Immediate `$3` specifies size
- If size is greater than register size,
it overflows to adjecent register
(eg. copying 16 bytes to register `r1` copies first 8 bytes to it
and the remaining to `r2`)
## Absolute addressing
- Type: `RRAH`
- Computes address from base register and absolute offset
| Opcode | Mnemonic | Operation |
|:-------|:---------|:-------------------|
| 0x4D | LD | `#0 ← $3[#1 + $2]` |
| 0x4E | ST | `$3[#1 + $2] ← #0` |
## Relative addressing
- Type: `RROH`
- Computes address from register and offset from program counter
| Opcode | Mnemonic | Operation |
|:-------|:---------|:------------------------|
| 0x4F | LDR | `#0 ← $3[pc + #1 + $2]` |
| 0x50 | STR | `$3[pc + #1 + $2] ← #0` |
# Block memory copy
- Type: `RRH`
- Copies block of `$3` bytes from memory location on address on `#0` to `#1`
| Opcode | Mnemonic | Operation |
|:-------|:---------|:------------------|
| 0x51 | BMC | `$3[#1] ← $3[x0]` |
# Block register copy
- Type: `RRB`
- Copy block of `$3` registers starting with `#0` to `#1`
- Copying over the 256 registers causes an exception
| Opcode | Mnemonic | Operation |
|:-------|:---------|:--------------|
| 0x52 | BRC | `$3#1 ← $3#0` |
# Relative jump
- Type: `O`
| Opcode | Mnemonic | Operation |
|:-------|:---------|:---------------|
| 0x53 | JMP | `pc ← pc + $0` |
# Linking jump
- Operation:
- Save address of following instruction to `#0`
- `#0 ← pc+<instruction size>`
- Jump to specified address
| Opcode | Mnemonic | Instruction type | Address |
|:-------|:---------|:------------------|:-------------------------|
| 0x54 | JAL | RRO (size = 6 B) | Relative, `pc + #1 + $2` |
| 0x55 | JALA | RRA (size = 10 B) | Absolute, `#1 + $2` |
# Conditional jump
- Perform comparsion, if operation met, jump to relative address
- Type: `RRP`
- Operation: `if #0 <CMP> #1 { pc ← pc + $2 }`
| Opcode | Mnemonic | Condition | Type |
|:-------|:---------|:-------------------|:-----|
| 0x56 | JEQ | Equals (`=`) | Xi64 |
| 0x57 | JNE | Not-equals (`≠`) | Xi64 |
| 0x58 | JLTU | Less-than (`<`) | Ui64 |
| 0x59 | JGTU | Greater-than (`>`) | Ui64 |
| 0x5A | JLTS | Less-than (`<`) | Si64 |
| 0x5B | JGTS | Greater-than (`>`) | Si64 |
# Environment traps
- Traps to the environment
- Type: `N`
| Opcode | Mnemonic | Trap type |
|:-------|:---------|:-----------------|
| 0x5C | ECA | Environment call |
| 0x5D | EBP | Breakpoint |
# Floating point binary operations
- Type: `RRR`
- Operation: `#0 ← #1 <OP> #2`
| Opcode | Mnemonic | Operation | Type |
|:-------|:---------|:---------------------|:-----|
| 0x5E | FADD32 | Addition (`+`) | Fl32 |
| 0x5F | FADD64 | Addition (`+`) | Fl64 |
| 0x60 | FSUB32 | Subtraction (`-`) | Fl32 |
| 0x61 | FSUB64 | Subtraction (`-`) | Fl64 |
| 0x62 | FMUL32 | Multiplication (`*`) | Fl32 |
| 0x63 | FMUL64 | Multiplication (`*`) | Fl64 |
| 0x64 | FDIV32 | Division (`/`) | Fl32 |
| 0x65 | FDIV64 | Division (`/`) | Fl64 |
# Fused multiply-add
- Type: `RRRR`
- Operation: `#0 ← (#1 * #2) + #3`
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x66 | FMA32 | Fl32 |
| 0x67 | FMA64 | Fl64 |
# Comparsions
- Type: `RRR`
- Operation: `#0 ← #1 <=> #2`
- Comparsion table same as for `CMPx`/`CMPxI`
- NaN is less-than/greater-than depends on variant
| Opcode | Mnemonic | Type | NaN is |
|:-------|:---------|:-----|:-------|
| 0x6A | FCMPLT32 | Fl32 | < |
| 0x6B | FCMPLT64 | Fl64 | < |
| 0x6C | FCMPGT32 | Fl32 | > |
| 0x6D | FCMPGT64 | Fl64 | > |
# Int to float
- Type: `RR`
- Converts from `Si64`
- Operation: `#0 ← Fl<SIZE>(#1)`
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x6E | ITF32 | Fl32 |
| 0x6F | ITF64 | Fl64 |
# Float to int
- Type: `RRB`
- Operation: `#0 ← Si64(#1)`
- Immediate `$2` specifies rounding mode
| Opcode | Mnemonic | Type |
|:-------|:---------|:-----|
| 0x70 | FTI32 | Fl32 |
| 0x71 | FTI64 | Fl64 |
# Fl32 to Fl64
- Type: `RR`
- Operation: `#0 ← Fl64(#1)`
| Opcode | Mnemonic |
|:-------|:---------|
| 0x72 | FC32T64 |
# Fl64 to Fl32
- Type: `RRB`
- Operation: `#0 ← Fl32(#1)`
- Immediate `$2` specified rounding mode
| Opcode | Mnemonic |
|:-------|:---------|
| 0x73 | FC64T32 |
# 16-bit relative address instruction variants
| Opcode | Mnemonic | Type | Variant of |
|:-------|:---------|:-----|:-----------|
| 0x74 | LRA16 | RRP | LRA |
| 0x75 | LDR16 | RRPH | LDR |
| 0x76 | STR16 | RRPH | STR |
| 0x77 | JMP16 | P | JMP |